diff options
Diffstat (limited to 'board')
32 files changed, 1646 insertions, 81 deletions
diff --git a/board/davinci/dm355evm/dm355evm.c b/board/davinci/dm355evm/dm355evm.c index 0a44748..87f284c 100644 --- a/board/davinci/dm355evm/dm355evm.c +++ b/board/davinci/dm355evm/dm355evm.c @@ -92,8 +92,8 @@ int board_eth_init(bd_t *bis) static void nand_dm355evm_select_chip(struct mtd_info *mtd, int chip) { struct nand_chip *this = mtd->priv; - u32 wbase = (u32) this->IO_ADDR_W; - u32 rbase = (u32) this->IO_ADDR_R; + unsigned long wbase = (unsigned long) this->IO_ADDR_W; + unsigned long rbase = (unsigned long) this->IO_ADDR_R; if (chip == 1) { __set_bit(14, &wbase); diff --git a/board/davinci/dm355leopard/Makefile b/board/davinci/dm355leopard/Makefile new file mode 100644 index 0000000..26b0705 --- /dev/null +++ b/board/davinci/dm355leopard/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o +SOBJS := + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### +# This is for $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/davinci/dm355leopard/config.mk b/board/davinci/dm355leopard/config.mk new file mode 100644 index 0000000..d67df02 --- /dev/null +++ b/board/davinci/dm355leopard/config.mk @@ -0,0 +1,6 @@ +# Linux Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) +# + +#Provide at least 16MB spacing between us and the Linux Kernel image +TEXT_BASE = 0x81080000 diff --git a/board/davinci/dm355leopard/dm355leopard.c b/board/davinci/dm355leopard/dm355leopard.c new file mode 100644 index 0000000..e89786e --- /dev/null +++ b/board/davinci/dm355leopard/dm355leopard.c @@ -0,0 +1,98 @@ +/* + * Copyright (C) 2009 Texas Instruments Incorporated + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <nand.h> +#include <asm/io.h> +#include <asm/arch/hardware.h> +#include <asm/arch/gpio_defs.h> +#include <asm/arch/nand_defs.h> +#include "../common/misc.h" +#include <net.h> +#include <netdev.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + struct davinci_gpio *gpio01_base = + (struct davinci_gpio *)DAVINCI_GPIO_BANK01; + struct davinci_gpio *gpio23_base = + (struct davinci_gpio *)DAVINCI_GPIO_BANK23; + struct davinci_gpio *gpio67_base = + (struct davinci_gpio *)DAVINCI_GPIO_BANK67; + + gd->bd->bi_arch_number = MACH_TYPE_DM355_LEOPARD; + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + /* GIO 9 & 10 are used for IO */ + writel((readl(PINMUX3) & 0XF8FFFFFF), PINMUX3); + + /* Interrupt set GIO 9 */ + writel((readl(DAVINCI_GPIO_BINTEN) | 0x1), DAVINCI_GPIO_BINTEN); + + /* set GIO 9 input */ + writel((readl(&gpio01_base->dir) | (1 << 9)), &gpio01_base->dir); + + /* Both edge trigger GIO 9 */ + writel((readl(&gpio01_base->set_rising) | (1 << 9)), + &gpio01_base->set_rising); + writel((readl(&gpio01_base->dir) & ~(1 << 5)), &gpio01_base->dir); + + /* output low */ + writel((readl(&gpio01_base->set_data) & ~(1 << 5)), + &gpio01_base->set_data); + + /* set GIO 10 output */ + writel((readl(&gpio01_base->dir) & ~(1 << 10)), &gpio01_base->dir); + + /* output high */ + writel((readl(&gpio01_base->set_data) | (1 << 10)), + &gpio01_base->set_data); + + /* set GIO 32 output */ + writel((readl(&gpio23_base->dir) & ~(1 << 0)), &gpio23_base->dir); + + /* output High */ + writel((readl(&gpio23_base->set_data) | (1 << 0)), + &gpio23_base->set_data); + + /* Enable UART1 MUX Lines */ + writel((readl(PINMUX0) & ~3), PINMUX0); + writel((readl(&gpio67_base->dir) & ~(1 << 6)), &gpio67_base->dir); + writel((readl(&gpio67_base->set_data) | (1 << 6)), + &gpio67_base->set_data); + + return 0; +} + +#ifdef CONFIG_DRIVER_DM9000 +int board_eth_init(bd_t *bis) +{ + return dm9000_initialize(bis); +} +#endif + +#ifdef CONFIG_NAND_DAVINCI +int board_nand_init(struct nand_chip *nand) +{ + davinci_nand_init(nand); + + return 0; +} +#endif diff --git a/board/davinci/dm365evm/dm365evm.c b/board/davinci/dm365evm/dm365evm.c index 5b97060..290eb99 100644 --- a/board/davinci/dm365evm/dm365evm.c +++ b/board/davinci/dm365evm/dm365evm.c @@ -1,4 +1,5 @@ /* + * Copyright (C) 2009 Texas Instruments Incorporated * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -79,8 +80,8 @@ int board_eth_init(bd_t *bis) static void nand_dm365evm_select_chip(struct mtd_info *mtd, int chip) { struct nand_chip *this = mtd->priv; - u32 wbase = (u32) this->IO_ADDR_W; - u32 rbase = (u32) this->IO_ADDR_R; + unsigned long wbase = (unsigned long) this->IO_ADDR_W; + unsigned long rbase = (unsigned long) this->IO_ADDR_R; if (chip == 1) { __set_bit(14, &wbase); diff --git a/board/davinci/dm6467evm/Makefile b/board/davinci/dm6467evm/Makefile new file mode 100644 index 0000000..26b0705 --- /dev/null +++ b/board/davinci/dm6467evm/Makefile @@ -0,0 +1,52 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := $(BOARD).o +SOBJS := + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### +# This is for $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/davinci/dm6467evm/config.mk b/board/davinci/dm6467evm/config.mk new file mode 100644 index 0000000..ca801c2 --- /dev/null +++ b/board/davinci/dm6467evm/config.mk @@ -0,0 +1,2 @@ +#Provide at least 16MB spacing between us and the Linux Kernel image +TEXT_BASE = 0x81080000 diff --git a/board/davinci/dm6467evm/dm6467evm.c b/board/davinci/dm6467evm/dm6467evm.c new file mode 100644 index 0000000..9605818 --- /dev/null +++ b/board/davinci/dm6467evm/dm6467evm.c @@ -0,0 +1,31 @@ +/* + * Copyright (C) 2009 Texas Instruments Incorporated + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <asm/io.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DM6467_EVM; + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + diff --git a/board/eukrea/cpu9260/cpu9260.c b/board/eukrea/cpu9260/cpu9260.c index 0b4f0d4..af8a4a2 100644 --- a/board/eukrea/cpu9260/cpu9260.c +++ b/board/eukrea/cpu9260/cpu9260.c @@ -165,7 +165,7 @@ int board_init(void) /* arch number of the board */ #if defined(CONFIG_CPU9G20) - gd->bd->bi_arch_number = MACH_TYPE_CPUAT9260; + gd->bd->bi_arch_number = MACH_TYPE_CPUAT9G20; #elif defined(CONFIG_CPU9260) gd->bd->bi_arch_number = MACH_TYPE_CPUAT9260; #endif diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c index d9e2ae5..dadbeb6 100644 --- a/board/logicpd/zoom2/zoom2.c +++ b/board/logicpd/zoom2/zoom2.c @@ -50,9 +50,6 @@ * The details of the setting of the serial gpmc setup are not available. * The values were provided by another party. */ -void enable_gpmc_cs_config(u32 *gpmc_config, struct gpmc_cs *cs, u32 base, - u32 size); - static u32 gpmc_serial_TL16CP754C[GPMC_MAX_REG] = { 0x00011000, 0x001F1F01, @@ -129,7 +126,7 @@ int board_init (void) /* Configure console support on zoom2 */ gpmc_config = gpmc_serial_TL16CP754C; - enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[4], + enable_gpmc_cs_config(gpmc_config, &gpmc_cfg->cs[3], SERIAL_TL16CP754C_BASE, GPMC_SIZE_16M); /* board id for Linux */ diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c index 2b64f44..4d8b579 100644 --- a/board/mpl/vcma9/vcma9.c +++ b/board/mpl/vcma9/vcma9.c @@ -73,8 +73,9 @@ static inline void delay(unsigned long loops) int board_init(void) { - S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_clock_power * const clk_power = + s3c24x0_get_base_clock_power(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* to reduce PLL lock time, adjust the LOCKTIME register */ clk_power->LOCKTIME = 0xFFFFFF; @@ -174,7 +175,7 @@ static inline void NF_Init(void) void nand_init(void) { - S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); + struct s3c2410_nand * const nand = s3c2410_get_base_nand(); NF_Init(); #ifdef DEBUG @@ -190,21 +191,21 @@ nand_init(void) static u8 Get_PLD_ID(void) { - VCMA9_PLD * const pld = VCMA9_GetBase_PLD(); + VCMA9_PLD * const pld = VCMA9_get_base_PLD(); return(pld->ID); } static u8 Get_PLD_BOARD(void) { - VCMA9_PLD * const pld = VCMA9_GetBase_PLD(); + VCMA9_PLD * const pld = VCMA9_get_base_PLD(); return(pld->BOARD); } static u8 Get_PLD_SDRAM(void) { - VCMA9_PLD * const pld = VCMA9_GetBase_PLD(); + VCMA9_PLD * const pld = VCMA9_get_base_PLD(); return(pld->SDRAM); } diff --git a/board/mpl/vcma9/vcma9.h b/board/mpl/vcma9/vcma9.h index 220b705..f46e0e4 100644 --- a/board/mpl/vcma9/vcma9.h +++ b/board/mpl/vcma9/vcma9.h @@ -39,14 +39,14 @@ typedef enum { static inline void NF_Conf(u16 conf) { - S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); + struct s3c2410_nand * const nand = s3c2410_get_base_nand(); nand->NFCONF = conf; } static inline void NF_Cmd(u8 cmd) { - S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); + struct s3c2410_nand * const nand = s3c2410_get_base_nand(); nand->NFCMD = cmd; } @@ -59,14 +59,14 @@ static inline void NF_CmdW(u8 cmd) static inline void NF_Addr(u8 addr) { - S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); + struct s3c2410_nand * const nand = s3c2410_get_base_nand(); nand->NFADDR = addr; } static inline void NF_SetCE(NFCE_STATE s) { - S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); + struct s3c2410_nand * const nand = s3c2410_get_base_nand(); switch (s) { case NFCE_LOW: @@ -81,35 +81,35 @@ static inline void NF_SetCE(NFCE_STATE s) static inline void NF_WaitRB(void) { - S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); + struct s3c2410_nand * const nand = s3c2410_get_base_nand(); while (!(nand->NFSTAT & (1<<0))); } static inline void NF_Write(u8 data) { - S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); + struct s3c2410_nand * const nand = s3c2410_get_base_nand(); nand->NFDATA = data; } static inline u8 NF_Read(void) { - S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); + struct s3c2410_nand * const nand = s3c2410_get_base_nand(); return(nand->NFDATA); } static inline void NF_Init_ECC(void) { - S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); + struct s3c2410_nand * const nand = s3c2410_get_base_nand(); nand->NFCONF |= (1<<12); } static inline u32 NF_Read_ECC(void) { - S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); + struct s3c2410_nand * const nand = s3c2410_get_base_nand(); return(nand->NFECC); } @@ -128,7 +128,7 @@ typedef struct { } /*__attribute__((__packed__))*/ VCMA9_PLD; #define VCMA9_PLD_BASE 0x2C000100 -static inline VCMA9_PLD * VCMA9_GetBase_PLD(void) +static inline VCMA9_PLD *VCMA9_get_base_PLD(void) { return (VCMA9_PLD * const)VCMA9_PLD_BASE; } diff --git a/board/samsung/smdk2400/smdk2400.c b/board/samsung/smdk2400/smdk2400.c index 2c47063..42bf008 100644 --- a/board/samsung/smdk2400/smdk2400.c +++ b/board/samsung/smdk2400/smdk2400.c @@ -46,8 +46,9 @@ extern int do_mdm_init; /* defined in common/main.c */ int board_init (void) { - S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_clock_power * const clk_power = + s3c24x0_get_base_clock_power(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* memory and cpu-speed are setup before relocation */ /* change the clock to be 50 MHz 1:1:1 */ diff --git a/board/samsung/smdk2410/smdk2410.c b/board/samsung/smdk2410/smdk2410.c index 25c38e6..fde7730 100644 --- a/board/samsung/smdk2410/smdk2410.c +++ b/board/samsung/smdk2410/smdk2410.c @@ -68,8 +68,9 @@ static inline void delay (unsigned long loops) int board_init (void) { - S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_clock_power * const clk_power = + s3c24x0_get_base_clock_power(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* to reduce PLL lock time, adjust the LOCKTIME register */ clk_power->LOCKTIME = 0xFFFFFF; diff --git a/board/samsung/smdkc100/Makefile b/board/samsung/smdkc100/Makefile new file mode 100644 index 0000000..808d0dd --- /dev/null +++ b/board/samsung/smdkc100/Makefile @@ -0,0 +1,55 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y := smdkc100.o +COBJS-$(CONFIG_SAMSUNG_ONENAND) += onenand.o +SOBJS := lowlevel_init.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(SOBJS) $(OBJS) + $(AR) $(ARFLAGS) $@ $(SOBJS) $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/samsung/smdkc100/config.mk b/board/samsung/smdkc100/config.mk new file mode 100644 index 0000000..ebab420 --- /dev/null +++ b/board/samsung/smdkc100/config.mk @@ -0,0 +1,16 @@ +# +# Copyright (C) 2008 # Samsung Elecgtronics +# Kyungmin Park <kyungmin.park@samsung.com> +# + +# On S5PC100 we use the 128 MiB OneDRAM bank at +# +# 0x30000000 to 0x35000000 (80MiB) +# 0x38000000 to 0x40000000 (128MiB) +# +# On S5PC110 we use the 128 MiB OneDRAM bank at +# +# 0x30000000 to 0x35000000 (80MiB) +# 0x40000000 to 0x48000000 (128MiB) +# +TEXT_BASE = 0x34800000 diff --git a/board/samsung/smdkc100/lowlevel_init.S b/board/samsung/smdkc100/lowlevel_init.S new file mode 100644 index 0000000..32572c5 --- /dev/null +++ b/board/samsung/smdkc100/lowlevel_init.S @@ -0,0 +1,215 @@ +/* + * Copyright (C) 2009 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * Minkyu Kang <mk7.kang@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> +#include <version.h> +#include <asm/arch/cpu.h> +#include <asm/arch/power.h> + +/* + * Register usages: + * + * r5 has zero always + */ + +_TEXT_BASE: + .word TEXT_BASE + + .globl lowlevel_init +lowlevel_init: + mov r9, lr + + /* r5 has always zero */ + mov r5, #0 + + ldr r8, =S5PC100_GPIO_BASE + + /* Disable Watchdog */ + ldr r0, =S5PC100_WATCHDOG_BASE @0xEA200000 + orr r0, r0, #0x0 + str r5, [r0] + +#ifndef CONFIG_ONENAND_IPL + /* setting SRAM */ + ldr r0, =S5PC100_SROMC_BASE + ldr r1, =0x9 + str r1, [r0] +#endif + + /* S5PC100 has 3 groups of interrupt sources */ + ldr r0, =S5PC100_VIC0_BASE @0xE4000000 + ldr r1, =S5PC100_VIC1_BASE @0xE4000000 + ldr r2, =S5PC100_VIC2_BASE @0xE4000000 + + /* Disable all interrupts (VIC0, VIC1 and VIC2) */ + mvn r3, #0x0 + str r3, [r0, #0x14] @INTENCLEAR + str r3, [r1, #0x14] @INTENCLEAR + str r3, [r2, #0x14] @INTENCLEAR + +#ifndef CONFIG_ONENAND_IPL + /* Set all interrupts as IRQ */ + str r5, [r0, #0xc] @INTSELECT + str r5, [r1, #0xc] @INTSELECT + str r5, [r2, #0xc] @INTSELECT + + /* Pending Interrupt Clear */ + str r5, [r0, #0xf00] @INTADDRESS + str r5, [r1, #0xf00] @INTADDRESS + str r5, [r2, #0xf00] @INTADDRESS +#endif + +#ifndef CONFIG_ONENAND_IPL + /* for UART */ + bl uart_asm_init + + /* for TZPC */ + bl tzpc_asm_init +#endif + +#ifdef CONFIG_ONENAND_IPL + /* init system clock */ + bl system_clock_init + + bl mem_ctrl_asm_init + + /* Wakeup support. Don't know if it's going to be used, untested. */ + ldr r0, =S5PC100_RST_STAT + ldr r1, [r0] + bic r1, r1, #0xfffffff7 + cmp r1, #0x8 + beq wakeup_reset +#endif + +1: + mov lr, r9 + mov pc, lr + +#ifdef CONFIG_ONENAND_IPL +wakeup_reset: + + /* Clear wakeup status register */ + ldr r0, =S5PC100_WAKEUP_STAT + ldr r1, [r0] + str r1, [r0] + + /* Load return address and jump to kernel */ + ldr r0, =S5PC100_INFORM0 + + /* r1 = physical address of s5pc100_cpu_resume function */ + ldr r1, [r0] + + /* Jump to kernel (sleep.S) */ + mov pc, r1 + nop + nop +#endif + +/* + * system_clock_init: Initialize core clock and bus clock. + * void system_clock_init(void) + */ +system_clock_init: + ldr r8, =S5PC1XX_CLOCK_BASE @ 0xE0100000 + + /* Set Clock divider */ + ldr r1, =0x00011110 + str r1, [r8, #0x304] + ldr r1, =0x1 + str r1, [r8, #0x308] + ldr r1, =0x00011301 + str r1, [r8, #0x300] + + /* Set Lock Time */ + ldr r1, =0xe10 @ Locktime : 0xe10 = 3600 + str r1, [r8, #0x000] @ APLL_LOCK + str r1, [r8, #0x004] @ MPLL_LOCK + str r1, [r8, #0x008] @ EPLL_LOCK + str r1, [r8, #0x00C] @ HPLL_LOCK + + /* APLL_CON */ + ldr r1, =0x81bc0400 @ SDIV 0, PDIV 4, MDIV 444 (1332MHz) + str r1, [r8, #0x100] + /* MPLL_CON */ + ldr r1, =0x80590201 @ SDIV 1, PDIV 2, MDIV 89 (267MHz) + str r1, [r8, #0x104] + /* EPLL_CON */ + ldr r1, =0x80870303 @ SDIV 3, PDIV 3, MDIV 135 (67.5MHz) + str r1, [r8, #0x108] + /* HPLL_CON */ + ldr r1, =0x80600603 + str r1, [r8, #0x10C] + + /* Set Source Clock */ + ldr r1, =0x1111 @ A, M, E, HPLL Muxing + str r1, [r8, #0x200] @ CLK_SRC0 + + ldr r1, =0x1000001 @ Uart Clock & CLK48M Muxing + str r1, [r8, #0x204] @ CLK_SRC1 + + ldr r1, =0x9000 @ ARMCLK/4 + str r1, [r8, #0x400] @ CLK_OUT + + /* wait at least 200us to stablize all clock */ + mov r2, #0x10000 +1: subs r2, r2, #1 + bne 1b + + mov pc, lr + +#ifndef CONFIG_ONENAND_IPL +/* + * uart_asm_init: Initialize UART's pins + */ +uart_asm_init: + mov r0, r8 + ldr r1, =0x22222222 + str r1, [r0, #0x0] @ GPA0_CON + ldr r1, =0x00022222 + str r1, [r0, #0x20] @ GPA1_CON + + mov pc, lr + +/* + * tzpc_asm_init: Initialize TZPC + */ +tzpc_asm_init: + ldr r0, =0xE3800000 + mov r1, #0x0 + str r1, [r0] + mov r1, #0xff + str r1, [r0, #0x804] + str r1, [r0, #0x810] + + ldr r0, =0xE2800000 + str r1, [r0, #0x804] + str r1, [r0, #0x810] + str r1, [r0, #0x81C] + + ldr r0, =0xE2900000 + str r1, [r0, #0x804] + str r1, [r0, #0x810] + + mov pc, lr +#endif diff --git a/board/samsung/smdkc100/mem_setup.S b/board/samsung/smdkc100/mem_setup.S new file mode 100644 index 0000000..94a701d --- /dev/null +++ b/board/samsung/smdkc100/mem_setup.S @@ -0,0 +1,197 @@ +/* + * Originates from Samsung's u-boot 1.1.6 port to S5PC1xx + * + * Copyright (C) 2009 Samsung Electrnoics + * Inki Dae <inki.dae@samsung.com> + * Heungjun Kim <riverful.kim@samsung.com> + * Minkyu Kang <mk7.kang@samsung.com> + * Kyungmin Park <kyungmin.park@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <config.h> + + .globl mem_ctrl_asm_init +mem_ctrl_asm_init: + ldr r6, =S5PC100_DMC_BASE @ 0xE6000000 + + /* DLL parameter setting */ + ldr r1, =0x50101000 + str r1, [r6, #0x018] @ PHYCONTROL0 + ldr r1, =0xf4 + str r1, [r6, #0x01C] @ PHYCONTROL1 + ldr r1, =0x0 + str r1, [r6, #0x020] @ PHYCONTROL2 + + /* DLL on */ + ldr r1, =0x50101002 + str r1, [r6, #0x018] @ PHYCONTROL0 + + /* DLL start */ + ldr r1, =0x50101003 + str r1, [r6, #0x018] @ PHYCONTROL0 + + /* Force value locking for DLL off */ + str r1, [r6, #0x018] @ PHYCONTROL0 + + /* DLL off */ + ldr r1, =0x50101001 + str r1, [r6, #0x018] @ PHYCONTROL0 + + /* auto refresh off */ + ldr r1, =0xff001010 + str r1, [r6, #0x000] @ CONCONTROL + + /* + * Burst Length 4, 2 chips, 32-bit, LPDDR + * OFF: dynamic self refresh, force precharge, dynamic power down off + */ + ldr r1, =0x00212100 + str r1, [r6, #0x004] @ MEMCONTROL + + /* + * Note: + * If Bank0 has OneDRAM we place it at 0x2800'0000 + * So finally Bank1 should address start at at 0x2000'0000 + */ + mov r4, #0x0 + +swap_memory: + /* + * Bank0 + * 0x30 -> 0x30000000 + * 0xf8 -> 0x37FFFFFF + * [15:12] 0: Linear + * [11:8 ] 2: 9 bits + * [ 7:4 ] 2: 14 bits + * [ 3:0 ] 2: 4 banks + */ + ldr r1, =0x30f80222 + /* if r4 is 1, swap the bank */ + cmp r4, #0x1 + orreq r1, r1, #0x08000000 + str r1, [r6, #0x008] @ MEMCONFIG0 + + /* + * Bank1 + * 0x38 -> 0x38000000 + * 0xf8 -> 0x3fFFFFFF + * [15:12] 0: Linear + * [11:8 ] 2: 9 bits + * [ 7:4 ] 2: 14 bits + * [ 3:0 ] 2: 4 banks + */ + ldr r1, =0x38f80222 + /* if r4 is 1, swap the bank */ + cmp r4, #0x1 + biceq r1, r1, #0x08000000 + str r1, [r6, #0x00c] @ MEMCONFIG1 + + ldr r1, =0x20000000 + str r1, [r6, #0x014] @ PRECHCONFIG + + /* + * FIXME: Please verify these values + * 7.8us * 166MHz %LE %LONG1294(0x50E) + * 7.8us * 133MHz %LE %LONG1038(0x40E), + * 7.8us * 100MHz %LE %LONG780(0x30C), + * 7.8us * 20MHz %LE %LONG156(0x9C), + * 7.8us * 10MHz %LE %LONG78(0x4E) + */ + ldr r1, =0x0000050e + str r1, [r6, #0x030] @ TIMINGAREF + + /* 166 MHz */ + ldr r1, =0x0c233287 + str r1, [r6, #0x034] @ TIMINGROW + + /* twtr=3 twr=2 trtp=3 cl=3 wl=3 rl=3 */ + ldr r1, =0x32330303 + str r1, [r6, #0x038] @ TIMINGDATA + + /* tfaw=4 sxsr=0x14 txp=0x14 tcke=3 tmrd=3 */ + ldr r1, =0x04141433 + str r1, [r6, #0x03C] @ TIMINGPOWER + + /* chip0 Deselect */ + ldr r1, =0x07000000 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip0 PALL */ + ldr r1, =0x01000000 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip0 REFA */ + ldr r1, =0x05000000 + str r1, [r6, #0x010] @ DIRECTCMD + /* chip0 REFA */ + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip0 MRS, CL%LE %LONG3, BL%LE %LONG4 */ + ldr r1, =0x00000032 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip1 Deselect */ + ldr r1, =0x07100000 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip1 PALL */ + ldr r1, =0x01100000 + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip1 REFA */ + ldr r1, =0x05100000 + str r1, [r6, #0x010] @ DIRECTCMD + /* chip1 REFA */ + str r1, [r6, #0x010] @ DIRECTCMD + + /* chip1 MRS, CL%LE %LONG3, BL%LE %LONG4 */ + ldr r1, =0x00100032 + str r1, [r6, #0x010] @ DIRECTCMD + + /* auto refresh on */ + ldr r1, =0xff002030 + str r1, [r6, #0x000] @ CONCONTROL + + /* PwrdnConfig */ + ldr r1, =0x00100002 + str r1, [r6, #0x028] @ PWRDNCONFIG + + /* BL%LE %LONG */ + ldr r1, =0xff212100 + str r1, [r6, #0x004] @ MEMCONTROL + + + /* Try to test memory area */ + cmp r4, #0x1 + beq 1f + + mov r4, #0x1 + ldr r1, =0x37ffff00 + str r4, [r1] + str r4, [r1, #0x4] @ dummy write + ldr r0, [r1] + cmp r0, r4 + bne swap_memory + +1: + mov pc, lr + + .ltorg diff --git a/board/samsung/smdkc100/onenand.c b/board/samsung/smdkc100/onenand.c new file mode 100644 index 0000000..c25869e --- /dev/null +++ b/board/samsung/smdkc100/onenand.c @@ -0,0 +1,83 @@ +/* + * Copyright (C) 2008-2009 Samsung Electronics + * Kyungmin Park <kyungmin.park@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <linux/mtd/compat.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/onenand.h> +#include <linux/mtd/samsung_onenand.h> + +#include <onenand_uboot.h> + +#include <asm/io.h> +#include <asm/arch/clock.h> + +void onenand_board_init(struct mtd_info *mtd) +{ + struct onenand_chip *this = mtd->priv; + struct s5pc100_clock *clk = (struct s5pc100_clock *)S5PC1XX_CLOCK_BASE; + struct samsung_onenand *onenand; + int value; + + this->base = (void *)S5PC100_ONENAND_BASE; + onenand = (struct samsung_onenand *)this->base; + + /* D0 Domain memory clock gating */ + value = readl(&clk->gate_d01); + value &= ~(1 << 2); /* CLK_ONENANDC */ + value |= (1 << 2); + writel(value, &clk->gate_d01); + + value = readl(&clk->src0); + value &= ~(1 << 24); /* MUX_1nand: 0 from HCLKD0 */ + value &= ~(1 << 20); /* MUX_HREF: 0 from FIN_27M */ + writel(value, &clk->src0); + + value = readl(&clk->div1); + value &= ~(3 << 16); /* PCLKD1_RATIO */ + value |= (1 << 16); + writel(value, &clk->div1); + + writel(ONENAND_MEM_RESET_COLD, &onenand->mem_reset); + + while (!(readl(&onenand->int_err_stat) & RST_CMP)) + continue; + + writel(RST_CMP, &onenand->int_err_ack); + + /* + * Access_Clock [2:0] + * 166 MHz, 134 Mhz : 3 + * 100 Mhz, 60 Mhz : 2 + */ + writel(0x3, &onenand->acc_clock); + + writel(INT_ERR_ALL, &onenand->int_err_mask); + writel(1 << 0, &onenand->int_pin_en); /* Enable */ + + value = readl(&onenand->int_err_mask); + value &= ~RDY_ACT; + writel(value, &onenand->int_err_mask); + + s3c_onenand_init(mtd); +} diff --git a/board/samsung/smdkc100/smdkc100.c b/board/samsung/smdkc100/smdkc100.c new file mode 100644 index 0000000..15a1a27 --- /dev/null +++ b/board/samsung/smdkc100/smdkc100.c @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2008-2009 Samsung Electronics + * Minkyu Kang <mk7.kang@samsung.com> + * Kyungmin Park <kyungmin.park@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + gd->bd->bi_arch_number = MACH_TYPE_SMDKC100; + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = get_ram_size((long *)PHYS_SDRAM_1, + PHYS_SDRAM_1_SIZE); + + return 0; +} + +#ifdef CONFIG_DISPLAY_BOARDINFO +int checkboard(void) +{ + printf("Board:\tSMDKC100\n"); + return 0; +} +#endif diff --git a/board/sbc2410x/sbc2410x.c b/board/sbc2410x/sbc2410x.c index 6276850..7452c1f 100644 --- a/board/sbc2410x/sbc2410x.c +++ b/board/sbc2410x/sbc2410x.c @@ -75,8 +75,9 @@ static inline void delay (unsigned long loops) int board_init (void) { - S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_clock_power * const clk_power = + s3c24x0_get_base_clock_power(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* to reduce PLL lock time, adjust the LOCKTIME register */ clk_power->LOCKTIME = 0xFFFFFF; @@ -170,7 +171,7 @@ static inline void NF_Init(void) void nand_init(void) { - S3C2410_NAND * const nand = S3C2410_GetBase_NAND(); + struct s3c2410_nand * const nand = s3c2410_get_base_nand(); NF_Init(); #ifdef DEBUG diff --git a/board/ti/sdp3430/Makefile b/board/ti/sdp3430/Makefile new file mode 100644 index 0000000..2554c7b --- /dev/null +++ b/board/ti/sdp3430/Makefile @@ -0,0 +1,49 @@ +# +# (C) Copyright 2000, 2001, 2002 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := sdp.o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/ti/sdp3430/config.mk b/board/ti/sdp3430/config.mk new file mode 100644 index 0000000..18e4761 --- /dev/null +++ b/board/ti/sdp3430/config.mk @@ -0,0 +1,33 @@ +# +# (C) Copyright 2006-2009 +# Texas Instruments Incorporated, <www.ti.com> +# +# OMAP 3430 SDP uses OMAP3 (ARM-CortexA8) cpu +# see http://www.ti.com/ for more information on Texas Instruments +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# +# Physical Address: +# 8000'0000 (bank0) +# A000/0000 (bank1) +# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 +# (mem base + reserved) + +# For use with external or internal boots. +TEXT_BASE = 0x80e80000 diff --git a/board/ti/sdp3430/sdp.c b/board/ti/sdp3430/sdp.c new file mode 100644 index 0000000..40cf26f --- /dev/null +++ b/board/ti/sdp3430/sdp.c @@ -0,0 +1,204 @@ +/* + * (C) Copyright 2004-2009 + * Texas Instruments Incorporated, <www.ti.com> + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> +#include <twl4030.h> +#include <asm/io.h> +#include <asm/arch/mux.h> +#include <asm/arch/mem.h> +#include <asm/arch/sys_proto.h> +#include <asm/mach-types.h> +#include "sdp.h" + +const omap3_sysinfo sysinfo = { + DDR_DISCRETE, + "OMAP3 SDP3430 board", +#if defined(CONFIG_ENV_IS_IN_ONENAND) + "OneNAND", +#elif defined(CONFIG_ENV_IS_IN_NAND) + "NAND", +#else + "NOR", +#endif +}; + +/* Timing definitions for GPMC controller for Sibley NOR */ +static const u32 gpmc_sdp_nor[] = { + SDP3430_NOR_GPMC_CONF1, + SDP3430_NOR_GPMC_CONF2, + SDP3430_NOR_GPMC_CONF3, + SDP3430_NOR_GPMC_CONF4, + SDP3430_NOR_GPMC_CONF5, + SDP3430_NOR_GPMC_CONF6, + /*CONF7- computed as params */ +}; + +/* + * Timing definitions for GPMC controller for Debug Board + * Debug board contains access to ethernet and DIP Switch setting + * information etc. + */ +static const u32 gpmc_sdp_debug[] = { + SDP3430_DEBUG_GPMC_CONF1, + SDP3430_DEBUG_GPMC_CONF2, + SDP3430_DEBUG_GPMC_CONF3, + SDP3430_DEBUG_GPMC_CONF4, + SDP3430_DEBUG_GPMC_CONF5, + SDP3430_DEBUG_GPMC_CONF6, + /*CONF7- computed as params */ +}; + +/* Timing defintions for GPMC OneNAND */ +static const u32 gpmc_sdp_onenand[] = { + SDP3430_ONENAND_GPMC_CONF1, + SDP3430_ONENAND_GPMC_CONF2, + SDP3430_ONENAND_GPMC_CONF3, + SDP3430_ONENAND_GPMC_CONF4, + SDP3430_ONENAND_GPMC_CONF5, + SDP3430_ONENAND_GPMC_CONF6, + /*CONF7- computed as params */ +}; + +/* GPMC definitions for GPMC NAND */ +static const u32 gpmc_sdp_nand[] = { + SDP3430_NAND_GPMC_CONF1, + SDP3430_NAND_GPMC_CONF2, + SDP3430_NAND_GPMC_CONF3, + SDP3430_NAND_GPMC_CONF4, + SDP3430_NAND_GPMC_CONF5, + SDP3430_NAND_GPMC_CONF6, + /*CONF7- computed as params */ +}; + +/* gpmc_cfg is initialized by gpmc_init and we use it here */ +extern struct gpmc *gpmc_cfg; + +/** + * @brief board_init - gpmc and basic setup as phase1 of boot sequence + * + * @return 0 + */ +int board_init(void) +{ + DECLARE_GLOBAL_DATA_PTR; + + gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ + /* TODO: Dynamically pop out CS mapping and program accordingly */ + /* Configure devices for default ON ON ON settings */ + enable_gpmc_cs_config(gpmc_sdp_nor, &gpmc_cfg->cs[0], + CONFIG_SYS_FLASH_BASE, GPMC_SIZE_128M); + enable_gpmc_cs_config(gpmc_sdp_nand, &gpmc_cfg->cs[1], 0x28000000, + GPMC_SIZE_16M); + enable_gpmc_cs_config(gpmc_sdp_onenand, &gpmc_cfg->cs[2], 0x20000000, + GPMC_SIZE_16M); + enable_gpmc_cs_config(gpmc_sdp_debug, &gpmc_cfg->cs[3], DEBUG_BASE, + GPMC_SIZE_16M); + /* board id for Linux */ + gd->bd->bi_arch_number = MACH_TYPE_OMAP_3430SDP; + /* boot param addr */ + gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); + + return 0; +} + +#define LAN_RESET_REGISTER (CONFIG_LAN91C96_BASE + 0x01c) +#define ETH_CONTROL_REG (CONFIG_LAN91C96_BASE + 0x30b) + +/** + * @brief ether_init Take the Ethernet controller out of reset and wait + * for the EEPROM load to complete. + */ +static void ether_init(void) +{ +#ifdef CONFIG_DRIVER_LAN91C96 + int cnt = 20; + + writew(0x0, LAN_RESET_REGISTER); + do { + writew(0x1, LAN_RESET_REGISTER); + udelay(100); + if (cnt == 0) + goto reset_err_out; + --cnt; + } while (readw(LAN_RESET_REGISTER) != 0x1); + + cnt = 20; + + do { + writew(0x0, LAN_RESET_REGISTER); + udelay(100); + if (cnt == 0) + goto reset_err_out; + --cnt; + } while (readw(LAN_RESET_REGISTER) != 0x0000); + udelay(1000); + + writeb(readb(ETH_CONTROL_REG) & ~0x1, ETH_CONTROL_REG); + udelay(1000); +reset_err_out: + return; + +#endif +} + +/** + * @brief misc_init_r - Configure SDP board specific configurations + * such as power configurations, ethernet initialization as phase2 of + * boot sequence + * + * @return 0 + */ +int misc_init_r(void) +{ + /* Partial setup: + * VAUX3 - 2.8V for DVI + * VPLL1 - 1.8V + * VDAC - 1.8V + * and turns on LEDA/LEDB (not needed ... NOP?) + */ + twl4030_power_init(); + + /* FIXME finish setup: + * VAUX1 - 2.8V for mainboard I/O + * VAUX2 - 2.8V for camera + * VAUX4 - 1.8V for OMAP3 CSI + * VMMC1 - 3.15V (init, variable) for MMC1 + * VMMC2 - 1.85V for MMC2 + * VSIM - off (init, variable) for MMC1.DAT[3..7], SIM + * VPLL2 - 1.8V + */ + ether_init(); + + return 0; +} + +/** + * @brief set_muxconf_regs Setting up the configuration Mux registers + * specific to the hardware. Many pins need to be moved from protect + * to primary mode. + */ +void set_muxconf_regs(void) +{ + /* platform specific muxes */ + MUX_SDP3430(); +} diff --git a/board/ti/sdp3430/sdp.h b/board/ti/sdp3430/sdp.h new file mode 100644 index 0000000..3526e94 --- /dev/null +++ b/board/ti/sdp3430/sdp.h @@ -0,0 +1,417 @@ +/* + * (C) Copyright 2004-2009 + * Texas Instruments Incorporated + * Richard Woodruff <r-woodruff2@ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _BOARD_SDP_H_ +#define _BOARD_SDP_H_ + +#define OFF_IN_PD 0 +#define OFF_OUT_PD 0 + +/* + * IEN - Input Enable + * IDIS - Input Disable + * PTD - Pull type Down + * PTU - Pull type Up + * DIS - Pull type selection is inactive + * EN - Pull type selection is active + * M0 - Mode 0 + * The commented string gives the final mux configuration for that pin + */ +#define MUX_SDP3430()\ + /*SDRC*/\ + MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0))\ + /*GPMC*/\ + MUX_VAL(CP(GPMC_A1), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_A2), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_A3), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_A4), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_A5), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_A6), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_A7), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_A8), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_A9), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_A10), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_D0), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_D1), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_D2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_D3), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_D4), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_D5), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_D6), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_D7), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_D8), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_D9), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_D10), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_D11), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_D12), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_D13), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_D14), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_D15), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_NCS0), (OFF_OUT_PD | IDIS | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_NCS1), (OFF_OUT_PD | IDIS | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_NCS2), (OFF_OUT_PD | IDIS | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_NCS3), (OFF_OUT_PD | IDIS | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_NCS4), (OFF_IN_PD | IEN | PTU | EN | M4)) /*G55-F_DIS*/\ + MUX_VAL(CP(GPMC_NCS5), (OFF_OUT_PD | IDIS | PTD | DIS | M4))/*G56T_EN*/\ + MUX_VAL(CP(GPMC_NCS6), (OFF_IN_PD | IEN | PTD | DIS | M4))/*G57-AGPSP*/\ + MUX_VAL(CP(GPMC_NCS7), (OFF_IN_PD | IEN | PTU | EN | M4))/*G58-WLNIQ*/\ + MUX_VAL(CP(GPMC_CLK), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_NADV_ALE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_NOE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_NWE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_NBE0_CLE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_NBE1), (OFF_IN_PD | IEN | PTD | DIS | M4)) /*G61-BTST*/\ + MUX_VAL(CP(GPMC_NWP), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(GPMC_WAIT0), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_WAIT1), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(GPMC_WAIT2), (OFF_IN_PD | IEN | PTU | EN | M4)) /*GPIO_64*/\ + MUX_VAL(CP(GPMC_WAIT3), (OFF_IN_PD | IEN | PTU | EN | M4)) /*GPIO_65*/\ + /*DSS*/\ + MUX_VAL(CP(DSS_PCLK), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_HSYNC), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_VSYNC), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_ACBIAS), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA0), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA1), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA2), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA3), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA4), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA5), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA6), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA7), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA8), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA9), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA10), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA11), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA12), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA13), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA14), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA15), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA16), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA17), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA18), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA19), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA20), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA21), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA22), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(DSS_DATA23), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + /*CAMERA*/\ + MUX_VAL(CP(CAM_HS), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(CAM_VS), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(CAM_XCLKA), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(CAM_PCLK), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(CAM_FLD), (OFF_OUT_PD | IDIS | PTD | DIS | M4))/*G98-C_RST*/\ + MUX_VAL(CP(CAM_D0), (OFF_IN_PD | IEN | PTD | DIS | M2)) /*CAM_D0 */\ + MUX_VAL(CP(CAM_D1), (OFF_IN_PD | IEN | PTD | DIS | M2)) /*CAM_D1 */\ + MUX_VAL(CP(CAM_D2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(CAM_D3), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(CAM_D4), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(CAM_D5), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(CAM_D6), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(CAM_D7), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(CAM_D8), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(CAM_D9), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(CAM_D10), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(CAM_D11), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(CAM_XCLKB), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(CAM_WEN), (OFF_IN_PD | IEN | PTD | DIS | M4)) /*GPIO_167*/\ + MUX_VAL(CP(CAM_STROBE), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(CSI2_DX0), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(CSI2_DY0), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(CSI2_DX1), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(CSI2_DY1), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + /*Audio InterfACe */\ + MUX_VAL(CP(MCBSP2_FSX), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MCBSP2_CLKX), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MCBSP2_DR), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MCBSP2_DX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + /*Expansion Card */\ + MUX_VAL(CP(MMC1_CLK), (OFF_OUT_PD | IDIS | PTU | EN | M0))\ + MUX_VAL(CP(MMC1_CMD), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(MMC1_DAT0), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(MMC1_DAT1), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(MMC1_DAT2), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(MMC1_DAT3), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(MMC1_DAT4), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(MMC1_DAT5), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(MMC1_DAT6), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(MMC1_DAT7), (OFF_IN_PD | IEN | PTU | EN | M0))\ + /*Wireless LAN */\ + MUX_VAL(CP(MMC2_CLK), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MMC2_CMD), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(MMC2_DAT0), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(MMC2_DAT1), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(MMC2_DAT2), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(MMC2_DAT3), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(MMC2_DAT4), (OFF_OUT_PD | IDIS | PTD | DIS | M1))/*DRD0*/\ + MUX_VAL(CP(MMC2_DAT5), (OFF_OUT_PD | IDIS | PTD | DIS | M1))/*DRD1*/\ + MUX_VAL(CP(MMC2_DAT6), (OFF_OUT_PD | IDIS | PTD | DIS | M1))/*DCMD*/\ + MUX_VAL(CP(MMC2_DAT7), (OFF_IN_PD | IEN | PTU | EN | M1))/*CLKIN*/\ + /*Bluetooth*/\ + MUX_VAL(CP(MCBSP3_DX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(MCBSP3_DR), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MCBSP3_CLKX), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MCBSP3_FSX), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(UART2_CTS), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(UART2_RTS), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(UART2_TX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(UART2_RX), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + /*Modem Interface */\ + MUX_VAL(CP(UART1_TX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(UART1_RTS), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(UART1_CTS), (OFF_IN_PD | IEN | PTU | DIS | M0))\ + MUX_VAL(CP(UART1_RX), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MCBSP4_CLKX), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SSI1DRX*/\ + MUX_VAL(CP(MCBSP4_DR), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SSI1FLGRX*/\ + MUX_VAL(CP(MCBSP4_DX), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SSI1RDYRX*/\ + MUX_VAL(CP(MCBSP4_FSX), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SSI1WAKE*/\ + MUX_VAL(CP(MCBSP1_CLKR), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MCBSP1_FSR), (OFF_OUT_PD | IDIS | PTU | EN | M4))/*G157BWP*/\ + MUX_VAL(CP(MCBSP1_DX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(MCBSP1_DR), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MCBSP_CLKS), (OFF_IN_PD | IEN | PTU | DIS | M0))\ + MUX_VAL(CP(MCBSP1_FSX), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MCBSP1_CLKX), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + /*Serial Interface*/\ + MUX_VAL(CP(UART3_CTS_RCTX), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(UART3_RTS_SD), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(UART3_RX_IRRX), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(UART3_TX_IRTX), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(HSUSB0_CLK), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(HSUSB0_STP), (OFF_OUT_PD | IDIS | PTU | EN | M0))\ + MUX_VAL(CP(HSUSB0_DIR), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(HSUSB0_NXT), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(HSUSB0_DATA0), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(HSUSB0_DATA1), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(HSUSB0_DATA2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(HSUSB0_DATA3), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(HSUSB0_DATA4), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(HSUSB0_DATA5), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(HSUSB0_DATA6), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(HSUSB0_DATA7), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + /* NOTE db: removed off-mode from I2C 1/2/3 ... external pullups!! */\ + MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0))\ + MUX_VAL(CP(HDQ_SIO), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(MCSPI1_CLK), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MCSPI1_SIMO), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MCSPI1_SOMI), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MCSPI1_CS0), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(MCSPI1_CS1), (OFF_OUT_PD | IDIS | PTD | EN | M0))\ + MUX_VAL(CP(MCSPI1_CS2), (OFF_OUT_PD | IDIS | PTD | DIS | M4))/*G176*/\ + MUX_VAL(CP(MCSPI1_CS3), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(MCSPI2_CLK), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MCSPI2_SIMO), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MCSPI2_SOMI), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(MCSPI2_CS0), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(MCSPI2_CS1), (OFF_IN_PD | IEN | PTD | EN | M0))\ + /*Control and debug */\ + MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SYS_CLKREQ), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SYS_NIRQ), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(SYS_BOOT0), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G2PENIRQ*/\ + MUX_VAL(CP(SYS_BOOT1), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*GPIO_3 */\ + MUX_VAL(CP(SYS_BOOT2), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G4MMC1WP*/\ + MUX_VAL(CP(SYS_BOOT3), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G5LCDENV*/\ + MUX_VAL(CP(SYS_BOOT4), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G6LANINT*/\ + MUX_VAL(CP(SYS_BOOT5), (OFF_OUT_PD | IEN | PTD | DIS | M4))/*G7MMC2WP*/\ + MUX_VAL(CP(SYS_BOOT6), (OFF_OUT_PD | IDIS | PTD | DIS | M4))/*G8ENBKL*/\ + MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SYS_CLKOUT2), (OFF_IN_PD | IEN | PTU | EN | M4))/*GPIO_186*/\ + MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(JTAG_TCK), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(JTAG_TMS), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(JTAG_TDI), (IEN | PTD | DIS | M0))\ + MUX_VAL(CP(JTAG_EMU0), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(JTAG_EMU1), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(ETK_CLK_ES2), (OFF_OUT_PD | IDIS | PTU | EN | M0))\ + MUX_VAL(CP(ETK_CTL_ES2), (OFF_OUT_PD | IDIS | PTD | DIS | M0))\ + MUX_VAL(CP(ETK_D0_ES2), (OFF_IN_PD | IEN | PTD | DIS | M1))/*USB1TLD0*/\ + MUX_VAL(CP(ETK_D1_ES2), (OFF_IN_PD | IEN | PTD | DIS | M1))/*SPI3_CS0*/\ + MUX_VAL(CP(ETK_D2_ES2), (OFF_IN_PD | IEN | PTD | EN | M1))/*USB1TLD2*/\ + MUX_VAL(CP(ETK_D3_ES2), (OFF_IN_PD | IEN | PTD | DIS | M1))/*USB1TLD7*/\ + MUX_VAL(CP(ETK_D4_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(ETK_D5_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(ETK_D6_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(ETK_D7_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(ETK_D8_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(ETK_D9_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(ETK_D10_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(ETK_D11_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(ETK_D12_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(ETK_D13_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(ETK_D14_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(ETK_D15_ES2), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + /*Die to Die */\ + MUX_VAL(CP(D2D_MCAD0), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD1), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD2), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD3), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD4), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD5), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD6), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD7), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD8), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD9), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD10), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD11), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD12), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD13), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD14), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD15), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD16), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD17), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD18), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD19), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD20), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD21), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD22), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD23), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD24), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD25), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD26), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD27), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD28), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD29), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD30), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD31), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD32), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD33), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD34), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD35), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_MCAD36), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_CLK26MI), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_NRESPWRON), (OFF_OUT_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_NRESWARM), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(D2D_ARM9NIRQ), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_UMA2P6FIQ), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_SPINT), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_FRINT), (OFF_IN_PD | IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_DMAREQ0), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_DMAREQ1), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_DMAREQ2), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_DMAREQ3), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_N3GTRST), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_N3GTDI), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_N3GTDO), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_N3GTMS), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_N3GTCK), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_N3GRTCK), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_MSTDBY), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(D2D_SWAKEUP), (IEN | PTD | EN | M0))\ + MUX_VAL(CP(D2D_IDLEREQ), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_IDLEACK), (OFF_IN_PD | IEN | PTU | EN | M0))\ + MUX_VAL(CP(D2D_MWRITE), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_SWRITE), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_MREAD), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_SREAD), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_MBUSFLAG), (OFF_IN_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(D2D_SBUSFLAG), (OFF_OUT_PD | IEN | PTD | DIS | M0))\ + MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0))\ + MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7)) /*SDRC_CKE1 NOT USED*/ + +/* + * GPMC Timing definitions for SDP3430 + * at L3 = 166Mhz + */ + +/* Timing definitions for GPMC controller for Sibley NOR */ +#define SDP3430_NOR_GPMC_CONF1 0x00001200 +#define SDP3430_NOR_GPMC_CONF2 0x001F1F00 +#define SDP3430_NOR_GPMC_CONF3 0x00080802 +#define SDP3430_NOR_GPMC_CONF4 0x1C091C09 +#define SDP3430_NOR_GPMC_CONF5 0x01131F1F +#define SDP3430_NOR_GPMC_CONF6 0x1F0F03C2 + +/* + * Timing definitions for GPMC controller for Debug Board + * Debug board contains access to ethernet and DIP Switch setting + * information etc. + */ +#define SDP3430_DEBUG_GPMC_CONF1 0x00611200 +#define SDP3430_DEBUG_GPMC_CONF2 0x001F1F01 +#define SDP3430_DEBUG_GPMC_CONF3 0x00080803 +#define SDP3430_DEBUG_GPMC_CONF4 0x1D091D09 +#define SDP3430_DEBUG_GPMC_CONF5 0x041D1F1F +#define SDP3430_DEBUG_GPMC_CONF6 0x1D0904C4 + +/* Timing defintions for GPMC OneNAND */ +#define SDP3430_ONENAND_GPMC_CONF1 0x00001200 +#define SDP3430_ONENAND_GPMC_CONF2 0x000F0F01 +#define SDP3430_ONENAND_GPMC_CONF3 0x00030301 +#define SDP3430_ONENAND_GPMC_CONF4 0x0F040F04 +#define SDP3430_ONENAND_GPMC_CONF5 0x010F1010 +#define SDP3430_ONENAND_GPMC_CONF6 0x1F060000 + +/* GPMC definitions for GPMC NAND */ +#define SDP3430_NAND_GPMC_CONF1 0x00000800 +#define SDP3430_NAND_GPMC_CONF2 0x00141400 +#define SDP3430_NAND_GPMC_CONF3 0x00141400 +#define SDP3430_NAND_GPMC_CONF4 0x0F010F01 +#define SDP3430_NAND_GPMC_CONF5 0x010C1414 +#define SDP3430_NAND_GPMC_CONF6 0x1F040A80 + +#endif /* _BOARD_SDP_H_ */ diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c index ae6f7c6..04a3607 100644 --- a/board/trab/cmd_trab.c +++ b/board/trab/cmd_trab.c @@ -644,9 +644,9 @@ static int adc_read (unsigned int channel) { int j = 1000; /* timeout value for wait loop in us */ int result; - S3C2400_ADC *padc; + struct s3c2400_adc *padc; - padc = S3C2400_GetBase_ADC(); + padc = s3c2400_get_base_adc(); channel &= 0x7; adc_init (); @@ -686,9 +686,9 @@ static int adc_read (unsigned int channel) static void adc_init (void) { - S3C2400_ADC *padc; + struct s3c2400_adc *padc; - padc = S3C2400_GetBase_ADC(); + padc = s3c2400_get_base_adc(); padc->ADCCON &= ~(0xff << 6); /* clear prescaler bits */ padc->ADCCON |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */ @@ -707,7 +707,7 @@ static void adc_init (void) static void led_set (unsigned int state) { - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); led_init (); @@ -740,7 +740,7 @@ static void led_blink (void) static void led_init (void) { - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* configure GPA12 as output and set to High -> LED off */ gpio->PACON &= ~(1 << 12); diff --git a/board/trab/rs485.c b/board/trab/rs485.c index 97aea91..7d5c0a2 100644 --- a/board/trab/rs485.c +++ b/board/trab/rs485.c @@ -42,7 +42,7 @@ static void trab_rs485_disable_rx(void); static void rs485_setbrg (void) { - S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR); + struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR); int i; unsigned int reg = 0; @@ -67,7 +67,7 @@ static void rs485_setbrg (void) static void rs485_cfgio (void) { - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); gpio->PFCON &= ~(0x3 << 2); gpio->PFCON |= (0x2 << 2); /* configure GPF1 as RXD1 */ @@ -101,7 +101,7 @@ int rs485_init (void) */ int rs485_getc (void) { - S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR); + struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR); /* wait for character to arrive */ while (!(uart->UTRSTAT & 0x1)); @@ -114,7 +114,7 @@ int rs485_getc (void) */ void rs485_putc (const char c) { - S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR); + struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR); /* wait for room in the tx FIFO */ while (!(uart->UTRSTAT & 0x2)); @@ -131,7 +131,7 @@ void rs485_putc (const char c) */ int rs485_tstc (void) { - S3C24X0_UART * const uart = S3C24X0_GetBase_UART(UART_NR); + struct s3c24x0_uart * const uart = s3c24x0_get_base_uart(UART_NR); return uart->UTRSTAT & 0x1; } @@ -168,7 +168,7 @@ static void set_rs485re(unsigned char rs485re_state) static void set_rs485de(unsigned char rs485de_state) { - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* This is on PORT A bit 11 */ if(rs485de_state) diff --git a/board/trab/trab.c b/board/trab/trab.c index 2dccd87..ea782a9 100644 --- a/board/trab/trab.c +++ b/board/trab/trab.c @@ -69,8 +69,9 @@ int board_init () #if defined(CONFIG_VFD) extern int vfd_init_clocks(void); #endif - S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_clock_power * const clk_power = + s3c24x0_get_base_clock_power(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* memory and cpu-speed are setup before relocation */ #ifdef CONFIG_TRAB_50MHZ @@ -338,22 +339,22 @@ static int key_pressed(void) static inline void SET_CS_TOUCH(void) { - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); gpio->PDDAT &= 0x5FF; } static inline void CLR_CS_TOUCH(void) { - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); gpio->PDDAT |= 0x200; } static void spi_init(void) { - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); - S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); + struct s3c24x0_spi * const spi = s3c24x0_get_base_spi(); int i; /* Configure I/O ports. */ @@ -377,7 +378,7 @@ static void spi_init(void) static void wait_transmit_done(void) { - S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI(); + struct s3c24x0_spi * const spi = s3c24x0_get_base_spi(); while (!(spi->ch[0].SPSTA & 0x01)); /* wait until transfer is done */ } @@ -385,7 +386,7 @@ static void wait_transmit_done(void) static void tsc2000_write(unsigned int page, unsigned int reg, unsigned int data) { - S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI(); + struct s3c24x0_spi * const spi = s3c24x0_get_base_spi(); unsigned int command; SET_CS_TOUCH(); diff --git a/board/trab/trab_fkt.c b/board/trab/trab_fkt.c index 74cdbfc..dc2a8d7 100644 --- a/board/trab/trab_fkt.c +++ b/board/trab/trab_fkt.c @@ -406,9 +406,9 @@ static int adc_read (unsigned int channel) { int j = 1000; /* timeout value for wait loop in us */ int result; - S3C2400_ADC *padc; + struct s3c2400_adc *padc; - padc = S3C2400_GetBase_ADC(); + padc = s3c2400_get_base_adc(); channel &= 0x7; padc->ADCCON &= ~ADC_STDBM; /* select normal mode */ @@ -446,9 +446,9 @@ static int adc_read (unsigned int channel) static void adc_init (void) { - S3C2400_ADC *padc; + struct s3c2400_adc *padc; - padc = S3C2400_GetBase_ADC(); + padc = s3c2400_get_base_adc(); padc->ADCCON &= ~(0xff << 6); /* clear prescaler bits */ padc->ADCCON |= ((65 << 6) | ADC_PRSCEN); /* set prescaler */ @@ -490,7 +490,7 @@ int do_power_switch (void) { int result; - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* configure GPE7 as input */ gpio->PECON &= ~(0x3 << (2 * 7)); @@ -557,7 +557,7 @@ int do_vfd_id (void) int i; long int pcup_old, pccon_old; int vfd_board_id; - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* try to red vfd board id from the value defined by pull-ups */ @@ -589,8 +589,8 @@ int do_buzzer (char **argv) { int counter; - S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS(); - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_timers * const timers = s3c24x0_get_base_timers(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* set prescaler for timer 2, 3 and 4 */ timers->TCFG0 &= ~0xFF00; @@ -637,7 +637,7 @@ int do_buzzer (char **argv) int do_led (char **argv) { - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* configure PC14 and PC15 as output */ gpio->PCCON &= ~(0xF << 28); @@ -692,7 +692,7 @@ int do_led (char **argv) int do_full_bridge (char **argv) { - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* configure PD5 and PD6 as output */ gpio->PDCON &= ~((0x3 << 5*2) | (0x3 << 6*2)); @@ -801,7 +801,7 @@ int do_motor_contact (void) int do_motor (char **argv) { - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* Configure I/O port */ gpio->PGCON &= ~(0x3 << 0); @@ -827,8 +827,8 @@ static void print_identifier (void) int do_pwm (char **argv) { int counter; - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); - S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); + struct s3c24x0_timers * const timers = s3c24x0_get_base_timers(); if (strcmp (argv[2], "on") == 0) { /* configure pin GPD8 as TOUT3 */ diff --git a/board/trab/tsc2000.c b/board/trab/tsc2000.c index 986b6fb..fc501a8 100644 --- a/board/trab/tsc2000.c +++ b/board/trab/tsc2000.c @@ -27,6 +27,7 @@ #include <common.h> #include <s3c2400.h> +#include <asm/io.h> #include <div64.h> #include "tsc2000.h" @@ -44,8 +45,8 @@ void tsc2000_spi_init(void) { - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); - S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); + struct s3c24x0_spi * const spi = s3c24x0_get_base_spi(); int i; /* Configure I/O ports. */ @@ -71,7 +72,7 @@ void tsc2000_spi_init(void) void spi_wait_transmit_done(void) { - S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI(); + struct s3c24x0_spi * const spi = s3c24x0_get_base_spi(); while (!(spi->ch[0].SPSTA & 0x01)); /* wait until transfer is done */ } @@ -79,7 +80,7 @@ void spi_wait_transmit_done(void) void tsc2000_write(unsigned short reg, unsigned short data) { - S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI(); + struct s3c24x0_spi * const spi = s3c24x0_get_base_spi(); unsigned int command; SET_CS_TOUCH(); @@ -100,7 +101,7 @@ void tsc2000_write(unsigned short reg, unsigned short data) unsigned short tsc2000_read (unsigned short reg) { unsigned short command, data; - S3C24X0_SPI * const spi = S3C24X0_GetBase_SPI(); + struct s3c24x0_spi * const spi = s3c24x0_get_base_spi(); SET_CS_TOUCH(); command = 0x8000 | reg; @@ -123,7 +124,7 @@ unsigned short tsc2000_read (unsigned short reg) void tsc2000_set_mux (unsigned int channel) { - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); CLR_MUX1_ENABLE; CLR_MUX2_ENABLE; CLR_MUX3_ENABLE; CLR_MUX4_ENABLE; @@ -200,7 +201,7 @@ void tsc2000_set_mux (unsigned int channel) void tsc2000_set_range (unsigned int range) { - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); switch (range) { case 1: @@ -306,7 +307,7 @@ s32 tsc2000_contact_temp (void) void tsc2000_reg_init (void) { - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); tsc2000_write(TSC2000_REG_ADC, 0x2036); tsc2000_write(TSC2000_REG_REF, 0x0011); diff --git a/board/trab/tsc2000.h b/board/trab/tsc2000.h index 50c09c2..0b6253f 100644 --- a/board/trab/tsc2000.h +++ b/board/trab/tsc2000.h @@ -128,7 +128,7 @@ void adc_wait_conversion_done(void); static inline void SET_CS_TOUCH(void) { - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); gpio->PDDAT &= 0x5FF; } @@ -136,7 +136,7 @@ static inline void SET_CS_TOUCH(void) static inline void CLR_CS_TOUCH(void) { - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); gpio->PDDAT |= 0x200; } diff --git a/board/trab/vfd.c b/board/trab/vfd.c index e5ca4ab..d5ad5bb 100644 --- a/board/trab/vfd.c +++ b/board/trab/vfd.c @@ -358,9 +358,9 @@ int vfd_init_clocks (void) { int i; - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); - S3C24X0_TIMERS * const timers = S3C24X0_GetBase_TIMERS(); - S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); + struct s3c24x0_timers * const timers = s3c24x0_get_base_timers(); + struct s3c24x0_lcd * const lcd = s3c24x0_get_base_lcd(); /* try to determine display type from the value * defined by pull-ups @@ -429,8 +429,8 @@ int vfd_init_clocks (void) */ int drv_vfd_init(void) { - S3C24X0_LCD * const lcd = S3C24X0_GetBase_LCD(); - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_lcd * const lcd = s3c24x0_get_base_lcd(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); char *tmp; ulong palette; static int vfd_init_done = 0; @@ -529,7 +529,7 @@ int drv_vfd_init(void) */ void disable_vfd (void) { - S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); + struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); VFD_DISABLE; gpio->PDCON &= ~0xC; |