diff options
Diffstat (limited to 'board')
157 files changed, 686 insertions, 1148 deletions
diff --git a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c index 0934e1b..40f41c7 100644 --- a/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c +++ b/board/MAI/AmigaOneG3SE/AmigaOneG3SE.c @@ -1,6 +1,7 @@ /* * (C) Copyright 2002 * Hyperion Entertainment, ThomasF@hyperion-entertainment.com + * (C) Copyright 2006 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -88,8 +89,6 @@ long initdram (int board_type) void after_reloc (ulong dest_addr, gd_t *gd) { -/* HJF: DECLARE_GLOBAL_DATA_PTR; */ - board_init_r (gd, dest_addr); } diff --git a/board/MAI/AmigaOneG3SE/articiaS.c b/board/MAI/AmigaOneG3SE/articiaS.c index a4dad64..3901b80 100644 --- a/board/MAI/AmigaOneG3SE/articiaS.c +++ b/board/MAI/AmigaOneG3SE/articiaS.c @@ -29,6 +29,8 @@ #include "smbus.h" #include "via686.h" +DECLARE_GLOBAL_DATA_PTR; + #undef DEBUG struct dimm_bank { @@ -82,7 +84,6 @@ static inline unsigned short NSto10PS (unsigned char spd_byte) long detect_sdram (uint8 * rom, int dimmNum, struct dimm_bank *banks) { - DECLARE_GLOBAL_DATA_PTR; int dimm_address = (dimmNum == 0) ? SM_DIMM0_ADDR : SM_DIMM1_ADDR; uint32 busclock = gd->bus_clk; uint32 memclock = busclock; @@ -394,8 +395,6 @@ uint32 burst_to_len (uint32 support) long articiaS_ram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - register uint32 i; register uint32 value1; register uint32 value2; diff --git a/board/MAI/AmigaOneG3SE/articiaS_pci.c b/board/MAI/AmigaOneG3SE/articiaS_pci.c index d2e9f29..480dae5 100644 --- a/board/MAI/AmigaOneG3SE/articiaS_pci.c +++ b/board/MAI/AmigaOneG3SE/articiaS_pci.c @@ -26,6 +26,8 @@ #include "memio.h" #include "articiaS.h" +DECLARE_GLOBAL_DATA_PTR; + #undef ARTICIA_PCI_DEBUG #ifdef ARTICIA_PCI_DEBUG @@ -493,8 +495,6 @@ pci_dev_t video_dev; int articiaS_init_vga (void) { - DECLARE_GLOBAL_DATA_PTR; - extern void shutdown_bios(void); pci_dev_t dev = ~0; int busnr = 0; diff --git a/board/MAI/AmigaOneG3SE/cmd_boota.c b/board/MAI/AmigaOneG3SE/cmd_boota.c index 3e2835a..143bba2 100644 --- a/board/MAI/AmigaOneG3SE/cmd_boota.c +++ b/board/MAI/AmigaOneG3SE/cmd_boota.c @@ -3,6 +3,7 @@ #include "../disk/part_amiga.h" #include <asm/cache.h> +DECLARE_GLOBAL_DATA_PTR; #undef BOOTA_DEBUG @@ -108,8 +109,6 @@ int do_boota (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) s = getenv ("autostart"); if (s && strcmp (s, "yes") == 0) { - DECLARE_GLOBAL_DATA_PTR; - void (*boot) (bd_t *, char *, block_dev_desc_t *); char *args; diff --git a/board/MAI/AmigaOneG3SE/serial.c b/board/MAI/AmigaOneG3SE/serial.c index e83fb46..b6f57c7 100644 --- a/board/MAI/AmigaOneG3SE/serial.c +++ b/board/MAI/AmigaOneG3SE/serial.c @@ -4,6 +4,8 @@ #include "memio.h" #include "articiaS.h" +DECLARE_GLOBAL_DATA_PTR; + #ifndef CFG_NS16550 static uint32 ComPort1; @@ -150,8 +152,6 @@ const NS16550_t Com1 = (NS16550_t) CFG_NS16550_COM2; int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - uint32 clock_divisor = 115200 / gd->baudrate; NS16550_init (Com0, clock_divisor); @@ -239,8 +239,6 @@ void serial_puts (const char *string) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - uint32 clock_divisor = 115200 / gd->baudrate; NS16550_init (Com0, clock_divisor); diff --git a/board/MAI/AmigaOneG3SE/via686.c b/board/MAI/AmigaOneG3SE/via686.c index c797e47..3606db8 100644 --- a/board/MAI/AmigaOneG3SE/via686.c +++ b/board/MAI/AmigaOneG3SE/via686.c @@ -28,6 +28,8 @@ #include "via686.h" #include "i8259.h" +DECLARE_GLOBAL_DATA_PTR; + #undef VIA_DEBUG #ifdef VIA_DEBUG @@ -226,33 +228,31 @@ __asm (" .globl via_calibrate_time_base \n" extern unsigned long via_calibrate_time_base(void); -void via_calibrate_bus_freq(void) +void via_calibrate_bus_freq (void) { - DECLARE_GLOBAL_DATA_PTR; - - unsigned long tb; + unsigned long tb; - /* This is 20 microseconds */ - #define CALIBRATE_TIME 28636 + /* This is 20 microseconds */ +#define CALIBRATE_TIME 28636 + /* Enable the timer (and disable speaker) */ + unsigned char c; - /* Enable the timer (and disable speaker) */ - unsigned char c; - c = in_byte(0x61); - out_byte(0x61, ((c & ~0x02) | 0x01)); + c = in_byte (0x61); + out_byte (0x61, ((c & ~0x02) | 0x01)); - /* Set timer 2 to low/high writing */ - out_byte(0x43, 0xb0); - out_byte(0x42, CALIBRATE_TIME & 0xff); - out_byte(0x42, CALIBRATE_TIME >>8); + /* Set timer 2 to low/high writing */ + out_byte (0x43, 0xb0); + out_byte (0x42, CALIBRATE_TIME & 0xff); + out_byte (0x42, CALIBRATE_TIME >> 8); - /* Read the time base */ - tb = via_calibrate_time_base(); + /* Read the time base */ + tb = via_calibrate_time_base (); - if (tb >= 700000) - gd->bus_clk = 133333333; - else - gd->bus_clk = 100000000; + if (tb >= 700000) + gd->bus_clk = 133333333; + else + gd->bus_clk = 100000000; } diff --git a/board/MAI/AmigaOneG3SE/video.c b/board/MAI/AmigaOneG3SE/video.c index 36e3c62..f6327f7 100644 --- a/board/MAI/AmigaOneG3SE/video.c +++ b/board/MAI/AmigaOneG3SE/video.c @@ -26,6 +26,8 @@ #include "memio.h" #include <part.h> +DECLARE_GLOBAL_DATA_PTR; + unsigned char *cursor_position; unsigned int cursor_row; unsigned int cursor_col; @@ -480,7 +482,6 @@ extern char version_string[]; void video_banner(void) { block_dev_desc_t *ide; - DECLARE_GLOBAL_DATA_PTR; int i; char *s; int maxdev; diff --git a/board/Marvell/common/serial.c b/board/Marvell/common/serial.c index 9d0d213..6a1d4d7 100644 --- a/board/Marvell/common/serial.c +++ b/board/Marvell/common/serial.c @@ -45,13 +45,13 @@ #include "ns16550.h" +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_MPSC int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - #if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2) int clock_divisor = 230400 / gd->baudrate; #endif @@ -88,8 +88,6 @@ int serial_tstc (void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate); } @@ -97,8 +95,6 @@ void serial_setbrg (void) int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - int clock_divisor = 230400 / gd->baudrate; #ifdef CFG_INIT_CHAN1 @@ -130,8 +126,6 @@ int serial_tstc (void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - int clock_divisor = 230400 / gd->baudrate; #ifdef CFG_INIT_CHAN1 diff --git a/board/Marvell/db64360/mpsc.c b/board/Marvell/db64360/mpsc.c index ccb3adc..d8acd31 100644 --- a/board/Marvell/db64360/mpsc.c +++ b/board/Marvell/db64360/mpsc.c @@ -42,6 +42,8 @@ #include "../include/memory.h" +DECLARE_GLOBAL_DATA_PTR; + /* Define this if you wish to use the MPSC as a register based UART. * This will force the serial port to not use the SDMA engine at all. */ @@ -114,9 +116,7 @@ static void mpsc_debug_init (void) /* Clear the CFR (CHR4) */ /* Write random 'Z' bit (bit 29) of CHR4 to enable debug uart *UNDOCUMENTED FEATURE* */ - temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_indent: Standard input:229: Warning:old style assignment ambiguity in "=&". Assuming "= &" - -REG_GAP)); + temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP)); temp &= 0xffffff00; temp |= BIT29; GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP), @@ -158,7 +158,6 @@ char mpsc_getchar_debug (void) * global variables [josh] */ int mpsc_putchar_early (char ch) { - DECLARE_GLOBAL_DATA_PTR; int mpsc = CHANNEL; int temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)); @@ -511,7 +510,6 @@ void mpsc_init2 (void) int galbrg_set_baudrate (int channel, int rate) { - DECLARE_GLOBAL_DATA_PTR; int clock; galbrg_disable (channel); /*ok */ diff --git a/board/Marvell/db64360/mv_eth.c b/board/Marvell/db64360/mv_eth.c index 3c5dee7..e5a87ad 100644 --- a/board/Marvell/db64360/mv_eth.c +++ b/board/Marvell/db64360/mv_eth.c @@ -732,6 +732,7 @@ int mv64360_eth_xmit (struct eth_device *dev, volatile void *dataPtr, pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC; /* DMA owned, first last */ pkt_info.byte_cnt = dataSize; pkt_info.buf_ptr = (unsigned int) dataPtr; + pkt_info.return_info = 0; status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info); if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) { diff --git a/board/Marvell/db64360/sdram_init.c b/board/Marvell/db64360/sdram_init.c index d2635f8..f04aaf9 100644 --- a/board/Marvell/db64360/sdram_init.c +++ b/board/Marvell/db64360/sdram_init.c @@ -42,6 +42,8 @@ #include "64360.h" #include "mv_regs.h" +DECLARE_GLOBAL_DATA_PTR; + #undef DEBUG #define MAP_PCI @@ -246,8 +248,6 @@ static inline unsigned short NSto10PS (unsigned char spd_byte) /* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) { - DECLARE_GLOBAL_DATA_PTR; - unsigned long spd_checksum; #ifdef ZUMA_NTL diff --git a/board/Marvell/db64460/mpsc.c b/board/Marvell/db64460/mpsc.c index 33fbc49..b783aff 100644 --- a/board/Marvell/db64460/mpsc.c +++ b/board/Marvell/db64460/mpsc.c @@ -42,6 +42,8 @@ #include "../include/memory.h" +DECLARE_GLOBAL_DATA_PTR; + /* Define this if you wish to use the MPSC as a register based UART. * This will force the serial port to not use the SDMA engine at all. */ @@ -114,9 +116,7 @@ static void mpsc_debug_init (void) /* Clear the CFR (CHR4) */ /* Write random 'Z' bit (bit 29) of CHR4 to enable debug uart *UNDOCUMENTED FEATURE* */ - temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_indent: Standard input:229: Warning:old style assignment ambiguity in "=&". Assuming "= &" - -REG_GAP)); + temp = GTREGREAD (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP)); temp &= 0xffffff00; temp |= BIT29; GT_REG_WRITE (GALMPSC_CHANNELREG_4 + (CHANNEL * GALMPSC_REG_GAP), @@ -158,7 +158,6 @@ char mpsc_getchar_debug (void) * global variables [josh] */ int mpsc_putchar_early (char ch) { - DECLARE_GLOBAL_DATA_PTR; int mpsc = CHANNEL; int temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)); @@ -511,7 +510,6 @@ void mpsc_init2 (void) int galbrg_set_baudrate (int channel, int rate) { - DECLARE_GLOBAL_DATA_PTR; int clock; galbrg_disable (channel); /*ok */ diff --git a/board/Marvell/db64460/mv_eth.c b/board/Marvell/db64460/mv_eth.c index ec5d581..b2c7835 100644 --- a/board/Marvell/db64460/mv_eth.c +++ b/board/Marvell/db64460/mv_eth.c @@ -731,6 +731,7 @@ int mv64460_eth_xmit (struct eth_device *dev, volatile void *dataPtr, pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC; /* DMA owned, first last */ pkt_info.byte_cnt = dataSize; pkt_info.buf_ptr = (unsigned int) dataPtr; + pkt_info.return_info = 0; status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info); if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) { diff --git a/board/Marvell/db64460/sdram_init.c b/board/Marvell/db64460/sdram_init.c index 8cfe84c..1762202 100644 --- a/board/Marvell/db64460/sdram_init.c +++ b/board/Marvell/db64460/sdram_init.c @@ -42,6 +42,8 @@ #include "64460.h" #include "mv_regs.h" +DECLARE_GLOBAL_DATA_PTR; + #undef DEBUG #define MAP_PCI @@ -246,8 +248,6 @@ static inline unsigned short NSto10PS (unsigned char spd_byte) /* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) { - DECLARE_GLOBAL_DATA_PTR; - unsigned long spd_checksum; #ifdef ZUMA_NTL diff --git a/board/adsvix/adsvix.c b/board/adsvix/adsvix.c index 5e770e9..c430d63 100644 --- a/board/adsvix/adsvix.c +++ b/board/adsvix/adsvix.c @@ -30,6 +30,8 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ /* @@ -38,8 +40,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -62,8 +62,6 @@ int board_late_init(void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; diff --git a/board/amcc/ebony/ebony.c b/board/amcc/ebony/ebony.c index a2595ee..dcafac9 100644 --- a/board/amcc/ebony/ebony.c +++ b/board/amcc/ebony/ebony.c @@ -28,6 +28,8 @@ #define FLASH_ONBD_N 2 /* 00000010 */ #define FLASH_SRAM_SEL 1 /* 00000001 */ +DECLARE_GLOBAL_DATA_PTR; + long int fixed_sdram(void); int board_early_init_f(void) @@ -107,7 +109,7 @@ long int initdram(int board_type) long dram_size = 0; #if defined(CONFIG_SPD_EEPROM) - dram_size = spd_sdram(0); + dram_size = spd_sdram(); #else dram_size = fixed_sdram(); #endif @@ -235,8 +237,6 @@ int pci_pre_init(struct pci_controller *hose) #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller *hose) { - DECLARE_GLOBAL_DATA_PTR; - /*--------------------------------------------------------------------------+ * Disable everything *--------------------------------------------------------------------------*/ diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c index c6b79a9..06a57f6 100644 --- a/board/amcc/luan/luan.c +++ b/board/amcc/luan/luan.c @@ -28,6 +28,7 @@ #include <spd_sdram.h> #include "epld.h" +DECLARE_GLOBAL_DATA_PTR; extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ @@ -291,8 +292,6 @@ int pci_pre_init( struct pci_controller *hose ) #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller *hose) { - DECLARE_GLOBAL_DATA_PTR; - /*--------------------------------------------------------------------------+ * Disable everything *--------------------------------------------------------------------------*/ diff --git a/board/amcc/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c index d1a29c5..3f6d204 100644 --- a/board/amcc/ocotea/ocotea.c +++ b/board/amcc/ocotea/ocotea.c @@ -30,6 +30,8 @@ #include <spd_sdram.h> #include <ppc4xx_enet.h> +DECLARE_GLOBAL_DATA_PTR; + #define BOOT_SMALL_FLASH 32 /* 00100000 */ #define FLASH_ONBD_N 2 /* 00000010 */ #define FLASH_SRAM_SEL 1 /* 00000001 */ @@ -204,7 +206,7 @@ long int initdram (int board_type) long dram_size = 0; #if defined(CONFIG_SPD_EEPROM) - dram_size = spd_sdram (0); + dram_size = spd_sdram (); #else dram_size = fixed_sdram (); #endif @@ -334,8 +336,6 @@ int pci_pre_init(struct pci_controller * hose ) #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller * hose ) { - DECLARE_GLOBAL_DATA_PTR; - /*--------------------------------------------------------------------------+ * Disable everything *--------------------------------------------------------------------------*/ diff --git a/board/amcc/walnut/walnut.c b/board/amcc/walnut/walnut.c index f1a96a6..292e026 100644 --- a/board/amcc/walnut/walnut.c +++ b/board/amcc/walnut/walnut.c @@ -99,7 +99,7 @@ void sdram_init(void) */ long int initdram(int board_type) { - return spd_sdram(0); + return spd_sdram(); } int testdram(void) diff --git a/board/amcc/yellowstone/yellowstone.c b/board/amcc/yellowstone/yellowstone.c index 8ddf910..20965c8 100644 --- a/board/amcc/yellowstone/yellowstone.c +++ b/board/amcc/yellowstone/yellowstone.c @@ -24,6 +24,8 @@ #include <asm/processor.h> #include <spd_sdram.h> +DECLARE_GLOBAL_DATA_PTR; + extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ int board_early_init_f(void) @@ -136,7 +138,6 @@ int board_early_init_f(void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; uint pbcr; int size_val = 0; diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index 509d8e4..392d0dc 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -24,6 +24,8 @@ #include <asm/processor.h> #include <spd_sdram.h> +DECLARE_GLOBAL_DATA_PTR; + extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ int board_early_init_f(void) @@ -132,7 +134,6 @@ int board_early_init_f(void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; uint pbcr; int size_val = 0; diff --git a/board/amirix/ap1000/serial.c b/board/amirix/ap1000/serial.c index 39c4157..c6ee772 100644 --- a/board/amirix/ap1000/serial.c +++ b/board/amirix/ap1000/serial.c @@ -27,9 +27,7 @@ #include <ns16550.h> -#if 0 -#include "serial.h" -#endif +DECLARE_GLOBAL_DATA_PTR; const NS16550_t COM_PORTS[] = { (NS16550_t) CFG_NS16550_COM1, (NS16550_t) CFG_NS16550_COM2 }; @@ -40,8 +38,6 @@ static int gComPort = 0; int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; (void) NS16550_init (COM_PORTS[0], clock_divisor); @@ -71,8 +67,6 @@ int serial_tstc (void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; #ifdef CFG_INIT_CHAN1 diff --git a/board/armadillo/armadillo.c b/board/armadillo/armadillo.c index de04c66..ca5bd1d 100644 --- a/board/armadillo/armadillo.c +++ b/board/armadillo/armadillo.c @@ -28,6 +28,8 @@ #include <common.h> #include <clps7111.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ @@ -37,8 +39,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* Activate LED flasher */ IO_LEDFLSH = 0x40; @@ -53,8 +53,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/assabet/assabet.c b/board/assabet/assabet.c index d3ccbb5..4f84a58 100644 --- a/board/assabet/assabet.c +++ b/board/assabet/assabet.c @@ -27,6 +27,8 @@ #include <common.h> #include <SA-1100.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ /* @@ -99,8 +101,6 @@ neponset_init(void) int board_init(void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_arch_number = MACH_TYPE_ASSABET; gd->bd->bi_boot_params = 0xc0000100; @@ -112,8 +112,6 @@ board_init(void) int dram_init(void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/at91rm9200dk/at91rm9200dk.c b/board/at91rm9200dk/at91rm9200dk.c index 9016776..002981a 100644 --- a/board/at91rm9200dk/at91rm9200dk.c +++ b/board/at91rm9200dk/at91rm9200dk.c @@ -27,6 +27,8 @@ #include <at91rm9200_net.h> #include <dm9161.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ /* * Miscelaneous platform dependent initialisations @@ -34,8 +36,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* Enable Ctrlc */ console_init_f (); @@ -56,8 +56,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM; gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; return 0; diff --git a/board/bmw/serial.c b/board/bmw/serial.c index f36a41b..712a95b 100644 --- a/board/bmw/serial.c +++ b/board/bmw/serial.c @@ -24,6 +24,8 @@ #include <common.h> #include "ns16550.h" +DECLARE_GLOBAL_DATA_PTR; + #if CONFIG_CONS_INDEX == 1 static struct NS16550 *console = (struct NS16550 *) (CFG_EUMB_ADDR + 0x4500); @@ -38,8 +40,6 @@ extern ulong get_bus_freq (ulong); int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - int clock_divisor = gd->bus_clk / 16 / gd->baudrate; NS16550_init (CONFIG_CONS_INDEX - 1, clock_divisor); @@ -75,8 +75,6 @@ int serial_tstc (void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - int clock_divisor = get_bus_freq (0) / 16 / gd->baudrate; NS16550_reinit (console, clock_divisor); diff --git a/board/cerf250/cerf250.c b/board/cerf250/cerf250.c index cc1bc16..307894f 100644 --- a/board/cerf250/cerf250.c +++ b/board/cerf250/cerf250.c @@ -27,6 +27,8 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ @@ -36,8 +38,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -60,8 +60,6 @@ int board_late_init(void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; diff --git a/board/cm4008/cm4008.c b/board/cm4008/cm4008.c index 4d2013b..d34737c 100644 --- a/board/cm4008/cm4008.c +++ b/board/cm4008/cm4008.c @@ -31,6 +31,8 @@ #include <common.h> #include <asm/arch/platform.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ #define ks8695_read(a) *((volatile unsigned int *) (KS8695_IO_BASE+(a))) @@ -75,8 +77,6 @@ int board_late_init (void) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* arch number of CM4008 */ gd->bd->bi_arch_number = 624; @@ -92,8 +92,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/cm41xx/cm41xx.c b/board/cm41xx/cm41xx.c index 65eaa94..02d05af 100644 --- a/board/cm41xx/cm41xx.c +++ b/board/cm41xx/cm41xx.c @@ -31,6 +31,8 @@ #include <common.h> #include <asm/arch/platform.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ #define ks8695_read(a) *((volatile unsigned int *) (KS8695_IO_BASE+(a))) @@ -75,8 +77,6 @@ int board_late_init (void) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* arch number of CM41xx */ gd->bd->bi_arch_number = 672; @@ -92,8 +92,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/cmc_pu2/cmc_pu2.c b/board/cmc_pu2/cmc_pu2.c index 14168e6..9ae3c42 100644 --- a/board/cmc_pu2/cmc_pu2.c +++ b/board/cmc_pu2/cmc_pu2.c @@ -33,6 +33,8 @@ #include <at91rm9200_net.h> #include <dm9161.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ /* * Miscelaneous platform dependent initialisations @@ -45,7 +47,6 @@ int hw_detect (void); int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; AT91PS_PIO piob = AT91C_BASE_PIOB; AT91PS_PIO pioc = AT91C_BASE_PIOC; @@ -109,8 +110,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM; gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; return 0; diff --git a/board/cogent/serial.c b/board/cogent/serial.c index 4c20017..2b595a8 100644 --- a/board/cogent/serial.c +++ b/board/cogent/serial.c @@ -6,6 +6,8 @@ #include <common.h> #include <board/cogent/serial.h> +DECLARE_GLOBAL_DATA_PTR; + #if (CMA_MB_CAPS & CMA_MB_CAP_SERPAR) #if (defined(CONFIG_8xx) && defined(CONFIG_8xx_CONS_NONE)) || \ @@ -25,76 +27,65 @@ int serial_init (void) { -/* DECLARE_GLOBAL_DATA_PTR; */ - - cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE; + cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE; - cma_mb_reg_write(&mbsp->ser_ier, 0x00); /* turn off interrupts */ - serial_setbrg (); - cma_mb_reg_write(&mbsp->ser_lcr, 0x03); /* 8 data, 1 stop, no parity */ - cma_mb_reg_write(&mbsp->ser_mcr, 0x03); /* RTS/DTR */ - cma_mb_reg_write(&mbsp->ser_fcr, 0x07); /* Clear & enable FIFOs */ + cma_mb_reg_write (&mbsp->ser_ier, 0x00); /* turn off interrupts */ + serial_setbrg (); + cma_mb_reg_write (&mbsp->ser_lcr, 0x03); /* 8 data, 1 stop, no parity */ + cma_mb_reg_write (&mbsp->ser_mcr, 0x03); /* RTS/DTR */ + cma_mb_reg_write (&mbsp->ser_fcr, 0x07); /* Clear & enable FIFOs */ - return (0); + return (0); } -void -serial_setbrg (void) +void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - - cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE; - unsigned int divisor; - unsigned char lcr; - - if ((divisor = br_to_div(gd->baudrate)) == 0) - divisor = DEFDIV; - - lcr = cma_mb_reg_read(&mbsp->ser_lcr); - cma_mb_reg_write(&mbsp->ser_lcr, lcr|0x80);/* Access baud rate(set DLAB)*/ - cma_mb_reg_write(&mbsp->ser_brl, divisor & 0xff); - cma_mb_reg_write(&mbsp->ser_brh, (divisor >> 8) & 0xff); - cma_mb_reg_write(&mbsp->ser_lcr, lcr); /* unset DLAB */ + cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE; + unsigned int divisor; + unsigned char lcr; + + if ((divisor = br_to_div (gd->baudrate)) == 0) + divisor = DEFDIV; + + lcr = cma_mb_reg_read (&mbsp->ser_lcr); + cma_mb_reg_write (&mbsp->ser_lcr, lcr | 0x80); /* Access baud rate(set DLAB) */ + cma_mb_reg_write (&mbsp->ser_brl, divisor & 0xff); + cma_mb_reg_write (&mbsp->ser_brh, (divisor >> 8) & 0xff); + cma_mb_reg_write (&mbsp->ser_lcr, lcr); /* unset DLAB */ } -void -serial_putc(const char c) +void serial_putc (const char c) { - cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE; + cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE; - if (c == '\n') - serial_putc('\r'); + if (c == '\n') + serial_putc ('\r'); - while ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_THRE) == 0) - ; + while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_THRE) == 0); - cma_mb_reg_write(&mbsp->ser_thr, c); + cma_mb_reg_write (&mbsp->ser_thr, c); } -void -serial_puts(const char *s) +void serial_puts (const char *s) { - while (*s != '\0') - serial_putc(*s++); + while (*s != '\0') + serial_putc (*s++); } -int -serial_getc(void) +int serial_getc (void) { - cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE; + cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE; - while ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_DR) == 0) - ; + while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_DR) == 0); - return ((int)cma_mb_reg_read(&mbsp->ser_rhr) & 0x7f); + return ((int) cma_mb_reg_read (&mbsp->ser_rhr) & 0x7f); } -int -serial_tstc(void) +int serial_tstc (void) { - cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_SERIAL_BASE; + cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE; - return ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_DR) != 0); + return ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_DR) != 0); } #endif /* CONS_NONE */ @@ -118,71 +109,63 @@ serial_tstc(void) #error CONFIG_KGDB_INDEX must be configured for Cogent motherboard serial #endif -void -kgdb_serial_init(void) +void kgdb_serial_init (void) { - cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_KGDB_SER_BASE; - unsigned int divisor; + cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE; + unsigned int divisor; - if ((divisor = br_to_div(CONFIG_KGDB_BAUDRATE)) == 0) - divisor = DEFDIV; + if ((divisor = br_to_div (CONFIG_KGDB_BAUDRATE)) == 0) + divisor = DEFDIV; - cma_mb_reg_write(&mbsp->ser_ier, 0x00); /* turn off interrupts */ - cma_mb_reg_write(&mbsp->ser_lcr, 0x80); /* Access baud rate(set DLAB)*/ - cma_mb_reg_write(&mbsp->ser_brl, divisor & 0xff); - cma_mb_reg_write(&mbsp->ser_brh, (divisor >> 8) & 0xff); - cma_mb_reg_write(&mbsp->ser_lcr, 0x03); /* 8 data, 1 stop, no parity */ - cma_mb_reg_write(&mbsp->ser_mcr, 0x03); /* RTS/DTR */ - cma_mb_reg_write(&mbsp->ser_fcr, 0x07); /* Clear & enable FIFOs */ + cma_mb_reg_write (&mbsp->ser_ier, 0x00); /* turn off interrupts */ + cma_mb_reg_write (&mbsp->ser_lcr, 0x80); /* Access baud rate(set DLAB) */ + cma_mb_reg_write (&mbsp->ser_brl, divisor & 0xff); + cma_mb_reg_write (&mbsp->ser_brh, (divisor >> 8) & 0xff); + cma_mb_reg_write (&mbsp->ser_lcr, 0x03); /* 8 data, 1 stop, no parity */ + cma_mb_reg_write (&mbsp->ser_mcr, 0x03); /* RTS/DTR */ + cma_mb_reg_write (&mbsp->ser_fcr, 0x07); /* Clear & enable FIFOs */ - printf("[on cma10x serial port B] "); + printf ("[on cma10x serial port B] "); } -void -putDebugChar(int c) +void putDebugChar (int c) { - cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_KGDB_SER_BASE; + cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE; - while ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_THRE) == 0) - ; + while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_THRE) == 0); - cma_mb_reg_write(&mbsp->ser_thr, c & 0xff); + cma_mb_reg_write (&mbsp->ser_thr, c & 0xff); } -void -putDebugStr(const char *str) +void putDebugStr (const char *str) { - while (*str != '\0') { - if (*str == '\n') - putDebugChar('\r'); - putDebugChar(*str++); - } + while (*str != '\0') { + if (*str == '\n') + putDebugChar ('\r'); + putDebugChar (*str++); + } } -int -getDebugChar(void) +int getDebugChar (void) { - cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_KGDB_SER_BASE; + cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE; - while ((cma_mb_reg_read(&mbsp->ser_lsr) & LSR_DR) == 0) - ; + while ((cma_mb_reg_read (&mbsp->ser_lsr) & LSR_DR) == 0); - return ((int)cma_mb_reg_read(&mbsp->ser_rhr) & 0x7f); + return ((int) cma_mb_reg_read (&mbsp->ser_rhr) & 0x7f); } -void -kgdb_interruptible(int yes) +void kgdb_interruptible (int yes) { - cma_mb_serial *mbsp = (cma_mb_serial *)CMA_MB_KGDB_SER_BASE; - - if (yes == 1) { - printf("kgdb: turning serial ints on\n"); - cma_mb_reg_write(&mbsp->ser_ier, 0xf); - } - else { - printf("kgdb: turning serial ints off\n"); - cma_mb_reg_write(&mbsp->ser_ier, 0x0); - } + cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_KGDB_SER_BASE; + + if (yes == 1) { + printf ("kgdb: turning serial ints on\n"); + cma_mb_reg_write (&mbsp->ser_ier, 0xf); + } else { + printf ("kgdb: turning serial ints off\n"); + cma_mb_reg_write (&mbsp->ser_ier, 0x0); + } } #endif /* KGDB && KGDB_NONE */ diff --git a/board/cradle/cradle.c b/board/cradle/cradle.c index 6f65f32..6d8d555 100644 --- a/board/cradle/cradle.c +++ b/board/cradle/cradle.c @@ -28,6 +28,8 @@ #include <asm/arch/pxa-regs.h> #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ @@ -181,8 +183,6 @@ int board_init (void) /**********************************************************/ { - DECLARE_GLOBAL_DATA_PTR; - led_code (0xf, YELLOW); /* arch number of HHP Cradle */ @@ -209,8 +209,6 @@ int dram_init (void) /**********************************************************/ { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; diff --git a/board/csb226/csb226.c b/board/csb226/csb226.c index c99a715..80caf8b 100644 --- a/board/csb226/csb226.c +++ b/board/csb226/csb226.c @@ -26,6 +26,8 @@ #include <common.h> #include <asm/arch/pxa-regs.h> +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_SHOW_BOOT_PROGRESS # define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) #else @@ -65,8 +67,6 @@ int misc_init_r(void) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -88,8 +88,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/csb637/csb637.c b/board/csb637/csb637.c index 6100a53..aeb1a13 100644 --- a/board/csb637/csb637.c +++ b/board/csb637/csb637.c @@ -26,6 +26,8 @@ #include <at91rm9200_net.h> #include <bcm5221.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ /* * Miscelaneous platform dependent initialisations @@ -33,8 +35,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* Enable Ctrlc */ console_init_f (); @@ -51,8 +51,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM; gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; return 0; diff --git a/board/cu824/cu824.c b/board/cu824/cu824.c index 5844a5c..3edd27a 100644 --- a/board/cu824/cu824.c +++ b/board/cu824/cu824.c @@ -2,7 +2,7 @@ * (C) Copyright 2001 * Rob Taylor, Flying Pig Systems. robt@flyingpig.com. * - * (C) Copyright 2001, 2002 + * (C) Copyright 2001-2006 * Wolfgang Denk, DENX Software Engineering, <wd@denx.de> * See file CREDITS for list of people who contributed to this @@ -29,12 +29,12 @@ #include <asm/processor.h> #include <pci.h> +DECLARE_GLOBAL_DATA_PTR; + #define BOARD_REV_REG 0xFE80002B int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; - char revision = *(volatile char *)(BOARD_REV_REG); char buf[32]; diff --git a/board/dave/B2/B2.c b/board/dave/B2/B2.c index 29676b8..64fe948 100644 --- a/board/dave/B2/B2.c +++ b/board/dave/B2/B2.c @@ -27,13 +27,14 @@ #include <common.h> #include <asm/hardware.h> +DECLARE_GLOBAL_DATA_PTR; + /* * Miscelaneous platform dependent initialization */ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; u32 temp; /* Configuration Port Control Register*/ @@ -119,8 +120,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/dave/PPChameleonEVB/PPChameleonEVB.c b/board/dave/PPChameleonEVB/PPChameleonEVB.c index 52055b8..e8302d9 100644 --- a/board/dave/PPChameleonEVB/PPChameleonEVB.c +++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c @@ -29,6 +29,8 @@ #include <command.h> #include <malloc.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ /* Prototypes */ @@ -81,8 +83,6 @@ extern flash_info_t flash_info[]; /* info for FLASH chips */ int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - /* adjust flash start and size as well as the offset */ gd->bd->bi_flashstart = 0 - flash_info[0].size; gd->bd->bi_flashoffset= flash_info[0].size - CFG_MONITOR_LEN; diff --git a/board/delta/config.mk b/board/delta/config.mk index 61828bb..3fe406c 100644 --- a/board/delta/config.mk +++ b/board/delta/config.mk @@ -1,5 +1 @@ -#TEXT_BASE = 0x0 -#TEXT_BASE = 0xa1700000 -#TEXT_BASE = 0xa3080000 -#TEXT_BASE = 0x9ffe0000 -TEXT_BASE = 0xa3008000 +TEXT_BASE = 0x83008000 diff --git a/board/delta/delta.c b/board/delta/delta.c index 3ffcc2a..b7671dd 100644 --- a/board/delta/delta.c +++ b/board/delta/delta.c @@ -26,9 +26,15 @@ */ #include <common.h> +#include <i2c.h> +#include <da9030.h> +#include <asm/arch/pxa-regs.h> + +DECLARE_GLOBAL_DATA_PTR; /* ------------------------------------------------------------------------- */ +static void init_DA9030(void); /* * Miscelaneous platform dependent initialisations @@ -36,8 +42,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -54,14 +58,13 @@ int board_late_init(void) { setenv("stdout", "serial"); setenv("stderr", "serial"); + init_DA9030(); return 0; } int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; @@ -73,3 +76,81 @@ int dram_init (void) return 0; } + +void i2c_init_board() +{ + CKENB |= (CKENB_4_I2C); + + /* setup I2C GPIO's */ + GPIO32 = 0x801; /* SCL = Alt. Fkt. 1 */ + GPIO33 = 0x801; /* SDA = Alt. Fkt. 1 */ +} + +/* initialize the DA9030 Power Controller */ +static void init_DA9030() +{ + uchar addr = (uchar) DA9030_I2C_ADDR, val = 0; + + CKENB |= CKENB_7_GPIO; + udelay(100); + + /* Rising Edge on EXTON to reset DA9030 */ + GPIO17 = 0x8800; /* configure GPIO17, no pullup, -down */ + GPDR0 |= (1<<17); /* GPIO17 is output */ + GSDR0 = (1<<17); + GPCR0 = (1<<17); /* drive GPIO17 low */ + GPSR0 = (1<<17); /* drive GPIO17 high */ + +#if CFG_DA9030_EXTON_DELAY + udelay((unsigned long) CFG_DA9030_EXTON_DELAY); /* wait for DA9030 */ +#endif + GPCR0 = (1<<17); /* drive GPIO17 low */ + + /* reset the watchdog and go active (0xec) */ + val = (SYS_CONTROL_A_HWRES_ENABLE | + (0x6<<4) | + SYS_CONTROL_A_WDOG_ACTION | + SYS_CONTROL_A_WATCHDOG); + if(i2c_write(addr, SYS_CONTROL_A, 1, &val, 1)) { + printf("Error accessing DA9030 via i2c.\n"); + return; + } + + i2c_reg_write(addr, REG_CONTROL_1_97, 0xfd); /* disable LDO1, enable LDO6 */ + i2c_reg_write(addr, LDO2_3, 0xd1); /* LDO2 =1,9V, LDO3=3,1V */ + i2c_reg_write(addr, LDO4_5, 0xcc); /* LDO2 =1,9V, LDO3=3,1V */ + i2c_reg_write(addr, LDO6_SIMCP, 0x3e); /* LDO6=3,2V, SIMCP = 5V support */ + i2c_reg_write(addr, LDO7_8, 0xc9); /* LDO7=2,7V, LDO8=3,0V */ + i2c_reg_write(addr, LDO9_12, 0xec); /* LDO9=3,0V, LDO12=3,2V */ + i2c_reg_write(addr, BUCK, 0x0c); /* Buck=1.2V */ + i2c_reg_write(addr, REG_CONTROL_2_98, 0x7f); /* All LDO'S on 8,9,10,11,12,14 */ + i2c_reg_write(addr, LDO_10_11, 0xcc); /* LDO10=3.0V LDO11=3.0V */ + i2c_reg_write(addr, LDO_15, 0xae); /* LDO15=1.8V, dislock first 3bit */ + i2c_reg_write(addr, LDO_14_16, 0x05); /* LDO14=2.8V, LDO16=NB */ + i2c_reg_write(addr, LDO_18_19, 0x9c); /* LDO18=3.0V, LDO19=2.7V */ + i2c_reg_write(addr, LDO_17_SIMCP0, 0x2c); /* LDO17=3.0V, SIMCP=3V support */ + i2c_reg_write(addr, BUCK2_DVC1, 0x9a); /* Buck2=1.5V plus Update support of 520 MHz */ + i2c_reg_write(addr, REG_CONTROL_2_18, 0x43); /* Ball on */ + i2c_reg_write(addr, MISC_CONTROLB, 0x08); /* session valid enable */ + i2c_reg_write(addr, USBPUMP, 0xc1); /* start pump, ignore HW signals */ + + val = i2c_reg_read(addr, STATUS); + if(val & STATUS_CHDET) + printf("Charger detected, turning on LED.\n"); + else { + printf("No charger detetected.\n"); + /* undervoltage? print error and power down */ + } +} + + +#if 0 +/* reset the DA9030 watchdog */ +void hw_watchdog_reset(void) +{ + uchar addr = (uchar) DA9030_I2C_ADDR, val = 0; + val = i2c_reg_read(addr, SYS_CONTROL_A); + val |= SYS_CONTROL_A_WATCHDOG; + i2c_reg_write(addr, SYS_CONTROL_A, val); +} +#endif diff --git a/board/delta/lowlevel_init.S b/board/delta/lowlevel_init.S index 498cf7f..f059db5 100644 --- a/board/delta/lowlevel_init.S +++ b/board/delta/lowlevel_init.S @@ -1,10 +1,5 @@ /* - * Most of this taken from Redboot hal_platform_setup.h with cleanup - * - * NOTE: I haven't clean this up considerably, just enough to get it - * running. See hal_platform_setup.h for the source. See - * board/cradle/lowlevel_init.S for another PXA250 setup that is - * much cleaner. + * (C) Copyright 2006 DENX Software Engineering * * See file CREDITS for list of people who contributed to this * project. @@ -31,14 +26,6 @@ DRAM_SIZE: .long CFG_DRAM_SIZE -/* wait for coprocessor write complete */ -.macro CPWAIT reg - mrc p15,0,\reg,c2,c0,0 - mov \reg,\reg - sub pc,pc,#4 -.endm - - .macro wait time ldr r2, =OSCR mov r3, #0 @@ -49,13 +36,9 @@ DRAM_SIZE: .long CFG_DRAM_SIZE bls 0b .endm -/* - * Memory setup - */ - .globl lowlevel_init lowlevel_init: - /* Set up GPIO pins first ----------------------------------------- */ + /* Set up GPIO pins first */ mov r10, lr /* Configure GPIO Pins 97, 98 UART1 / altern. Fkt. 1 */ @@ -73,22 +56,7 @@ lowlevel_init: bic r1, r1, #0x80000000 str r1, [r0] - /* ---------------------------------------------------------------- */ - /* Enable memory interface */ - /* ---------------------------------------------------------------- */ - - /* ---------------------------------------------------------------- */ - /* Step 1: Wait for at least 200 microsedonds to allow internal */ - /* clocks to settle. Only necessary after hard reset... */ - /* FIXME: can be optimized later */ - /* ---------------------------------------------------------------- */ -; wait #300 - mem_init: - -#define NEW_SDRAM_INIT 1 -#ifdef NEW_SDRAM_INIT - /* Configure ACCR Register - enable DMEMC Clock at 260 / 2 MHz */ ldr r0, =ACCR ldr r1, [r0] @@ -99,7 +67,7 @@ mem_init: /* 2. Programm MDCNFG, leaving DMCEN de-asserted */ ldr r0, =MDCNFG ldr r1, =(MDCNFG_DMAP | MDCNFG_DTYPE | MDCNFG_DTC_2 | MDCNFG_DCSE0 | MDCNFG_DRAC_13) - /* ldr r1, =0x80000403 */ + /* ldr r1, =0x80000403 */ str r1, [r0] ldr r1, [r0] /* delay until written */ @@ -140,121 +108,6 @@ mem_init: orr r1, r1, #MDCNFG_DMCEN str r1, [r0] - -#else /* NEW_SDRAM_INIT */ - - /* configure the MEMCLKCFG register */ - ldr r1, =MEMCLKCFG - ldr r2, =0x00010001 - str r2, [r1] @ WRITE - ldr r2, [r1] @ DELAY UNTIL WRITTEN - - /* set CSADRCFG[0] to data flash SRAM mode */ - ldr r1, =CSADRCFG0 - ldr r2, =0x00320809 - str r2, [r1] @ WRITE - ldr r2, [r1] @ DELAY UNTIL WRITTEN - - /* set CSADRCFG[1] to data flash SRAM mode */ - ldr r1, =CSADRCFG1 - ldr r2, =0x00320809 - str r2, [r1] @ WRITE - ldr r2, [r1] @ DELAY UNTIL WRITTEN - - /* set MSC 0 register for SRAM memory */ - ldr r1, =MSC0 - ldr r2, =0x11191119 - str r2, [r1] @ WRITE - ldr r2, [r1] @ DELAY UNTIL WRITTEN - - /* set CSADRCFG[2] to data flash SRAM mode */ - ldr r1, =CSADRCFG2 - ldr r2, =0x00320809 - str r2, [r1] @ WRITE - ldr r2, [r1] @ DELAY UNTIL WRITTEN - - /* set CSADRCFG[3] to VLIO mode */ - ldr r1, =CSADRCFG3 - ldr r2, =0x0032080B - str r2, [r1] @ WRITE - ldr r2, [r1] @ DELAY UNTIL WRITTEN - - /* set MSC 1 register for VLIO memory */ - ldr r1, =MSC1 - ldr r2, =0x123C1119 - str r2, [r1] @ WRITE - ldr r2, [r1] @ DELAY UNTIL WRITTEN - -#if 0 - /* This does not work in Zylonite. -SC */ - ldr r0, =0x15fffff0 - ldr r1, =0xb10b - str r1, [r0] - str r1, [r0, #4] -#endif - - /* Configure ACCR Register */ - ldr r0, =ACCR @ ACCR - ldr r1, =0x0180b108 - str r1, [r0] - ldr r1, [r0] - - /* Configure MDCNFG Register */ - ldr r0, =MDCNFG @ MDCNFG - ldr r1, =0x403 - str r1, [r0] - ldr r1, [r0] - - /* Perform Resistive Compensation by configuring RCOMP register */ - ldr r1, =RCOMP @ RCOMP - ldr r2, =0x000000ff - str r2, [r1] - ldr r2, [r1] - - /* Configure MDMRS Register for SDCS0 */ - ldr r1, =MDMRS @ MDMRS - ldr r2, =0x60000023 - ldr r3, [r1] - orr r2, r2, r3 - str r2, [r1] - ldr r2, [r1] - - /* Configure MDMRS Register for SDCS1 */ - ldr r1, =MDMRS @ MDMRS - ldr r2, =0xa0000023 - ldr r3, [r1] - orr r2, r2, r3 - str r2, [r1] - ldr r2, [r1] - - /* Configure MDREFR */ - ldr r1, =MDREFR @ MDREFR - ldr r2, =0x00000006 - str r2, [r1] - ldr r2, [r1] - - /* Configure EMPI */ - ldr r1, =EMPI @ EMPI - ldr r2, =0x80000000 - str r2, [r1] - ldr r2, [r1] - - /* Hardware DDR Read-Strobe Delay Calibration */ - ldr r0, =DDR_HCAL @ DDR_HCAL - ldr r1, =0x803ffc07 @ the offset is correct? -SC - str r1, [r0] - wait #5 - ldr r1, [r0] - - /* Here we assume the hardware calibration alwasy be successful. -SC */ - /* Set DMCEN bit in MDCNFG Register */ - ldr r0, =MDCNFG @ MDCNFG - ldr r1, [r0] - orr r1, r1, #0x40000000 @ enable SDRAM for Normal Access - str r1, [r0] - -#endif /* NEW_SDRAM_INIT */ - #ifndef CFG_SKIP_DRAM_SCRUB /* scrub/init SDRAM if enabled/present */ ldr r8, =CFG_DRAM_BASE /* base address of SDRAM (CFG_DRAM_BASE) */ @@ -290,96 +143,4 @@ mem_init: mcr p14,0,r0,c10,c0,0 /* dcsr */ endlowlevel_init: - mov pc, lr - - -/* -@******************************************************************************** -@ DDR calibration -@ -@ This function is used to calibrate DQS delay lines. -@ Monahans supports three ways to do it. One is software -@ calibration. Two is hardware calibration. Three is hybrid -@ calibration. -@ -@ TBD -@ -SC -ddr_calibration: - - @ Case 1: Write the correct delay value once - @ Configure DDR_SCAL Register - ldr r0, =DDR_SCAL @ DDR_SCAL -q ldr r1, =0xaf2f2f2f - str r1, [r0] - ldr r1, [r0] -*/ -/* @ Case 2: Software Calibration - @ Write test pattern to memory - ldr r5, =0x0faf0faf @ Data Pattern - ldr r4, =0xa0000000 @ DDR ram - str r5, [r4] - - mov r1, =0x0 @ delay count - mov r6, =0x0 - mov r7, =0x0 -ddr_loop1: - add r1, r1, =0x1 - cmp r1, =0xf - ble end_loop - mov r3, r1 - mov r0, r1, lsl #30 - orr r3, r3, r0 - mov r0, r1, lsl #22 - orr r3, r3, r0 - mov r0, r1, lsl #14 - orr r3, r3, r0 - orr r3, r3, =0x80000000 - ldr r2, =DDR_SCAL - str r3, [r2] - - ldr r2, [r4] - cmp r2, r5 - bne ddr_loop1 - mov r6, r1 -ddr_loop2: - add r1, r1, =0x1 - cmp r1, =0xf - ble end_loop - mov r3, r1 - mov r0, r1, lsl #30 - orr r3, r3, r0 - mov r0, r1, lsl #22 - orr r3, r3, r0 - mov r0, r1, lsl #14 - orr r3, r3, r0 - orr r3, r3, =0x80000000 - ldr r2, =DDR_SCAL - str r3, [r2] - - ldr r2, [r4] - cmp r2, r5 - be ddr_loop2 - mov r7, r2 - - add r3, r6, r7 - lsr r3, r3, =0x1 - mov r0, r1, lsl #30 - orr r3, r3, r0 - mov r0, r1, lsl #22 - orr r3, r3, r0 - mov r0, r1, lsl #14 - orr r3, r3, r0 - orr r3, r3, =0x80000000 - ldr r2, =DDR_SCAL - -end_loop: - - @ Case 3: Hardware Calibratoin - ldr r0, =DDR_HCAL @ DDR_HCAL - ldr r1, =0x803ffc07 @ the offset is correct? -SC - str r1, [r0] - wait #5 - ldr r1, [r0] - mov pc, lr -*/ diff --git a/board/delta/nand.c b/board/delta/nand.c index 7982548..fe648fc 100644 --- a/board/delta/nand.c +++ b/board/delta/nand.c @@ -293,11 +293,6 @@ static int dfc_wait(struct mtd_info *mtd, struct nand_chip *this, int state) { unsigned long ndsr=0, event=0; - /* mk@tbd set appropriate timeouts */ - /* if (state == FL_ERASING) */ - /* timeo = CFG_HZ * 400; */ - /* else */ - /* timeo = CFG_HZ * 20; */ if(state == FL_WRITING) { event = NDSR_CS0_CMDD | NDSR_CS0_BBD; } else if(state == FL_ERASING) { @@ -563,13 +558,12 @@ void board_nand_init(struct nand_chip *nand) /* wait 10 us due to cmd buffer clear reset */ - /* wait(10); */ + /* wait(10); */ nand->hwcontrol = dfc_hwcontrol; -/* nand->dev_ready = dfc_device_ready; */ +/* nand->dev_ready = dfc_device_ready; */ nand->eccmode = NAND_ECC_SOFT; - nand->chip_delay = NAND_DELAY_US; nand->options = NAND_BUSWIDTH_16; nand->waitfunc = dfc_wait; nand->read_byte = dfc_read_byte; diff --git a/board/dnp1110/dnp1110.c b/board/dnp1110/dnp1110.c index 24c3e00..ab8e7be 100644 --- a/board/dnp1110/dnp1110.c +++ b/board/dnp1110/dnp1110.c @@ -24,8 +24,8 @@ #include <common.h> #include <SA-1100.h> -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -33,25 +33,21 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ /* arch number of DNP1110-Board */ gd->bd->bi_arch_number = MACH_TYPE_DNP1110; - /* flash vpp on */ - PPDR |= 0x80; /* assumes LCD controller is off */ - PPSR |= 0x80; + /* flash vpp on */ + PPDR |= 0x80; /* assumes LCD controller is off */ + PPSR |= 0x80; return 0; } int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/eltec/bab7xx/bab7xx.c b/board/eltec/bab7xx/bab7xx.c index fc48ed5..555475e 100644 --- a/board/eltec/bab7xx/bab7xx.c +++ b/board/eltec/bab7xx/bab7xx.c @@ -31,6 +31,8 @@ #include <ns87308.h> #include <video_fb.h> +DECLARE_GLOBAL_DATA_PTR; + /*---------------------------------------------------------------------------*/ /* * Get Bus clock frequency @@ -169,8 +171,6 @@ long int initdram (int board_type) void after_reloc (ulong dest_addr) { - DECLARE_GLOBAL_DATA_PTR; - /* * Jump to the main U-Boot board init code */ diff --git a/board/eltec/elppc/elppc.c b/board/eltec/elppc/elppc.c index a9dbeb2..108adb1 100644 --- a/board/eltec/elppc/elppc.c +++ b/board/eltec/elppc/elppc.c @@ -26,6 +26,8 @@ #include <mpc106.h> #include <video_fb.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ int checkboard (void) @@ -137,8 +139,6 @@ void watchdog_reset (void) void after_reloc (ulong dest_addr) { - DECLARE_GLOBAL_DATA_PTR; - /* * Jump to the main U-Boot board init code */ diff --git a/board/ep7312/ep7312.c b/board/ep7312/ep7312.c index 11eab23..6968a5d 100644 --- a/board/ep7312/ep7312.c +++ b/board/ep7312/ep7312.c @@ -25,8 +25,7 @@ #include <common.h> #include <clps7111.h> -/* ------------------------------------------------------------------------- */ - +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -34,8 +33,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* Activate LED flasher */ IO_LEDFLSH = 0x40; @@ -50,8 +47,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/esd/apc405/apc405.c b/board/esd/apc405/apc405.c index 4b2b07a..078df00 100644 --- a/board/esd/apc405/apc405.c +++ b/board/esd/apc405/apc405.c @@ -26,7 +26,7 @@ #include <command.h> #include <malloc.h> -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; #if 0 #define FPGA_DEBUG @@ -166,8 +166,6 @@ int misc_init_f (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile unsigned short *fpga_mode = (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL); volatile unsigned short *fpga_ctrl2 = @@ -301,8 +299,6 @@ int misc_init_r (void) int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; - unsigned char str[64]; int i = getenv_r ("serial#", str, sizeof(str)); diff --git a/board/esd/ar405/ar405.c b/board/esd/ar405/ar405.c index 3aac3c6..dfead33 100644 --- a/board/esd/ar405/ar405.c +++ b/board/esd/ar405/ar405.c @@ -26,6 +26,8 @@ #include <asm/processor.h> #include <command.h> +DECLARE_GLOBAL_DATA_PTR; + /*cmd_boot.c*/ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); extern void lxt971_no_sleep(void); @@ -53,8 +55,6 @@ const unsigned char fpgadata_xl30[] = { int board_early_init_f (void) { - DECLARE_GLOBAL_DATA_PTR; - int index, len, i; int status; @@ -151,8 +151,6 @@ int board_early_init_f (void) int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; - int index; int len; char str[64]; diff --git a/board/esd/canbt/canbt.c b/board/esd/canbt/canbt.c index 2ced6cb..055a397 100644 --- a/board/esd/canbt/canbt.c +++ b/board/esd/canbt/canbt.c @@ -26,6 +26,7 @@ #include <asm/processor.h> #include <command.h> +DECLARE_GLOBAL_DATA_PTR; /*cmd_boot.c*/ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); @@ -50,8 +51,6 @@ const unsigned char fpgadata[] = { int board_early_init_f (void) { - DECLARE_GLOBAL_DATA_PTR; - unsigned long cntrl0Reg; int index, len, i; int status; diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c index e283a92..cb04710 100644 --- a/board/esd/cms700/cms700.c +++ b/board/esd/cms700/cms700.c @@ -26,10 +26,10 @@ #include <command.h> #include <malloc.h> +DECLARE_GLOBAL_DATA_PTR; extern void lxt971_no_sleep(void); - /* fpga configuration data - not compressed, generated by bin2c */ const unsigned char fpgadata[] = { @@ -87,8 +87,6 @@ int misc_init_f (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - /* adjust flash start and offset */ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; gd->bd->bi_flashoffset = 0; diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c index 1a27ca0..36bf329 100644 --- a/board/esd/cpci2dp/cpci2dp.c +++ b/board/esd/cpci2dp/cpci2dp.c @@ -26,6 +26,8 @@ #include <command.h> #include <malloc.h> +DECLARE_GLOBAL_DATA_PTR; + int board_early_init_f (void) { unsigned long cntrl0Reg; @@ -74,7 +76,6 @@ int misc_init_f (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; unsigned long cntrl0Reg; /* adjust flash start and offset */ diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c index 2ab9673..f803610 100644 --- a/board/esd/cpci405/cpci405.c +++ b/board/esd/cpci405/cpci405.c @@ -27,7 +27,8 @@ #include <malloc.h> #include <net.h> -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; + extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); /*cmd_boot.c*/ #if 0 #define FPGA_DEBUG @@ -100,8 +101,6 @@ int board_early_init_f (void) #endif #ifdef FPGA_DEBUG - DECLARE_GLOBAL_DATA_PTR; - /* set up serial port with default baudrate */ (void) get_clocks (); gd->baudrate = CONFIG_BAUDRATE; @@ -126,8 +125,6 @@ int board_early_init_f (void) if (status != 0) { /* booting FPGA failed */ #ifndef FPGA_DEBUG - DECLARE_GLOBAL_DATA_PTR; - /* set up serial port with default baudrate */ (void) get_clocks (); gd->baudrate = CONFIG_BAUDRATE; @@ -268,7 +265,6 @@ int misc_init_f (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; unsigned long cntrl0Reg; /* adjust flash start and offset */ @@ -707,8 +703,6 @@ U_BOOT_CMD( */ int do_get_bpip(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) { - DECLARE_GLOBAL_DATA_PTR; - bd_t *bd = gd->bd; char *buf; ulong crc; diff --git a/board/esd/cpci750/mpsc.c b/board/esd/cpci750/mpsc.c index 52398b2..25c10e0 100644 --- a/board/esd/cpci750/mpsc.c +++ b/board/esd/cpci750/mpsc.c @@ -42,6 +42,8 @@ #include "../../Marvell/include/memory.h" +DECLARE_GLOBAL_DATA_PTR; + /* Define this if you wish to use the MPSC as a register based UART. * This will force the serial port to not use the SDMA engine at all. */ @@ -157,7 +159,6 @@ char mpsc_getchar_debug (void) * global variables [josh] */ int mpsc_putchar_early (char ch) { - DECLARE_GLOBAL_DATA_PTR; int mpsc = CHANNEL; int temp = GTREGREAD (GALMPSC_CHANNELREG_2 + (mpsc * GALMPSC_REG_GAP)); @@ -510,7 +511,6 @@ void mpsc_init2 (void) int galbrg_set_baudrate (int channel, int rate) { - DECLARE_GLOBAL_DATA_PTR; int clock; galbrg_disable (channel); /*ok */ diff --git a/board/esd/cpci750/mv_eth.c b/board/esd/cpci750/mv_eth.c index be176dc..bc84ef0 100644 --- a/board/esd/cpci750/mv_eth.c +++ b/board/esd/cpci750/mv_eth.c @@ -733,6 +733,7 @@ int mv64360_eth_xmit (struct eth_device *dev, volatile void *dataPtr, pkt_info.cmd_sts = ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC; /* DMA owned, first last */ pkt_info.byte_cnt = dataSize; pkt_info.buf_ptr = (unsigned int) dataPtr; + pkt_info.return_info = 0; status = eth_port_send (ethernet_private, ETH_Q0, &pkt_info); if ((status == ETH_ERROR) || (status == ETH_QUEUE_FULL)) { diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c index db545ef..6bdfc1d 100644 --- a/board/esd/cpci750/sdram_init.c +++ b/board/esd/cpci750/sdram_init.c @@ -45,6 +45,7 @@ #include "64360.h" #include "mv_regs.h" +DECLARE_GLOBAL_DATA_PTR; #undef DEBUG /* #define DEBUG */ @@ -250,8 +251,6 @@ NSto10PS(unsigned char spd_byte) /* static int check_dimm(uchar slot, AUX_MEM_DIMM_INFO *info) */ static int check_dimm (uchar slot, AUX_MEM_DIMM_INFO * dimmInfo) { - DECLARE_GLOBAL_DATA_PTR; - unsigned long spd_checksum; uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR; diff --git a/board/esd/cpci750/serial.c b/board/esd/cpci750/serial.c index 44de052..ba32ac1 100644 --- a/board/esd/cpci750/serial.c +++ b/board/esd/cpci750/serial.c @@ -38,13 +38,12 @@ #include "../../Marvell/include/memory.h" #include "serial.h" - #include "mpsc.h" +DECLARE_GLOBAL_DATA_PTR; + int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - mpsc_init (gd->baudrate); return (0); @@ -70,8 +69,6 @@ int serial_tstc (void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate); } diff --git a/board/esd/cpciiser4/cpciiser4.c b/board/esd/cpciiser4/cpciiser4.c index 7bf7bb5..fcb8cbb 100644 --- a/board/esd/cpciiser4/cpciiser4.c +++ b/board/esd/cpciiser4/cpciiser4.c @@ -26,6 +26,8 @@ #include <asm/processor.h> #include <command.h> +DECLARE_GLOBAL_DATA_PTR; + /*cmd_boot.c*/ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); @@ -55,8 +57,6 @@ const unsigned char fpgadata[] = { int board_early_init_f (void) { - DECLARE_GLOBAL_DATA_PTR; - int index, len, i; volatile unsigned char dummy; int status; diff --git a/board/esd/dp405/dp405.c b/board/esd/dp405/dp405.c index fd51f7f..240ab78 100644 --- a/board/esd/dp405/dp405.c +++ b/board/esd/dp405/dp405.c @@ -26,6 +26,7 @@ #include <command.h> #include <malloc.h> +DECLARE_GLOBAL_DATA_PTR; /* fpga configuration data - not compressed, generated by bin2c */ const unsigned char fpgadata[] = @@ -84,8 +85,6 @@ int misc_init_f (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - /* adjust flash start and offset */ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; gd->bd->bi_flashoffset = 0; diff --git a/board/esd/du405/du405.c b/board/esd/du405/du405.c index 26e8341..a019ce4 100644 --- a/board/esd/du405/du405.c +++ b/board/esd/du405/du405.c @@ -28,6 +28,8 @@ #include <405gp_i2c.h> #include <command.h> +DECLARE_GLOBAL_DATA_PTR; + /*cmd_boot.c*/ extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); @@ -55,8 +57,6 @@ const unsigned char fpgadata[] = { int board_early_init_f (void) { - DECLARE_GLOBAL_DATA_PTR; - int index, len, i; int status; diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c index 99fd556..ea344c0 100644 --- a/board/esd/hh405/hh405.c +++ b/board/esd/hh405/hh405.c @@ -34,6 +34,8 @@ #include <pci.h> #include <sm501.h> +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_VIDEO_SM501 #define SWAP32(x) ((((x) & 0x000000ff) << 24) | (((x) & 0x0000ff00) << 8)|\ @@ -358,8 +360,6 @@ int board_early_init_f (void) int cf_enable(void) { - DECLARE_GLOBAL_DATA_PTR; - int i; volatile unsigned short *fpga_ctrl = @@ -391,8 +391,6 @@ int cf_enable(void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile unsigned short *fpga_ctrl = (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL); volatile unsigned short *lcd_contrast = @@ -628,8 +626,6 @@ int misc_init_r (void) int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; - char str[64]; int i = getenv_r ("serial#", str, sizeof(str)); @@ -673,8 +669,6 @@ long int initdram (int board_type) #ifdef CONFIG_IDE_RESET void ide_set_reset(int on) { - DECLARE_GLOBAL_DATA_PTR; - volatile unsigned short *fpga_mode = (unsigned short *)((ulong)CFG_FPGA_BASE_ADDR + CFG_FPGA_CTRL); volatile unsigned short *fpga_status = @@ -788,8 +782,6 @@ U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, */ void video_get_info_str (int line_number, char *info) { - DECLARE_GLOBAL_DATA_PTR; - char str[64]; char str2[64]; int i = getenv_r("serial#", str2, sizeof(str)); diff --git a/board/esd/hub405/hub405.c b/board/esd/hub405/hub405.c index 0c6771f..1e0accb 100644 --- a/board/esd/hub405/hub405.c +++ b/board/esd/hub405/hub405.c @@ -26,10 +26,10 @@ #include <command.h> #include <malloc.h> +DECLARE_GLOBAL_DATA_PTR; extern void lxt971_no_sleep(void); - int board_revision(void) { unsigned long osrl_reg; @@ -110,8 +110,6 @@ int misc_init_f (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4); volatile unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4); volatile unsigned char *duart2_mcr = (unsigned char *)((ulong)DUART2_BA + 4); @@ -208,8 +206,6 @@ int misc_init_r (void) */ int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; - char str[64]; int i = getenv_r ("serial#", str, sizeof(str)); diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c index 4be4d7e..e5d2273 100644 --- a/board/esd/pci405/pci405.c +++ b/board/esd/pci405/pci405.c @@ -30,6 +30,7 @@ #include "pci405.h" +DECLARE_GLOBAL_DATA_PTR; /* Prototypes */ int gunzip(void *, int, unsigned char *, unsigned long *); @@ -111,8 +112,6 @@ int board_revision(void) unsigned long fpga_done_state(void) { - DECLARE_GLOBAL_DATA_PTR; - if (gd->board_type < 2) { return FPGA_DONE_STATE_V11; } else { @@ -123,8 +122,6 @@ unsigned long fpga_done_state(void) unsigned long fpga_init_state(void) { - DECLARE_GLOBAL_DATA_PTR; - if (gd->board_type < 2) { return FPGA_INIT_STATE_V11; } else { @@ -320,8 +317,6 @@ int misc_init_r (void) int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; - char str[64]; int i = getenv_r ("serial#", str, sizeof(str)); diff --git a/board/esd/pmc405/pmc405.c b/board/esd/pmc405/pmc405.c index f9e4d43..7499671 100644 --- a/board/esd/pmc405/pmc405.c +++ b/board/esd/pmc405/pmc405.c @@ -29,10 +29,10 @@ #include <command.h> #include <malloc.h> +DECLARE_GLOBAL_DATA_PTR; extern void lxt971_no_sleep(void); - /* fpga configuration data - not compressed, generated by bin2c */ const unsigned char fpgadata[] = { @@ -100,8 +100,6 @@ int board_early_init_f (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - /* adjust flash start and offset */ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; gd->bd->bi_flashoffset = 0; diff --git a/board/esd/vom405/vom405.c b/board/esd/vom405/vom405.c index bc5fa7c..8be552e 100644 --- a/board/esd/vom405/vom405.c +++ b/board/esd/vom405/vom405.c @@ -26,10 +26,10 @@ #include <command.h> #include <malloc.h> +DECLARE_GLOBAL_DATA_PTR; extern void lxt971_no_sleep(void); - /* fpga configuration data - not compressed, generated by bin2c */ const unsigned char fpgadata[] = { @@ -81,8 +81,6 @@ int board_early_init_f (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - /* adjust flash start and offset */ gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; gd->bd->bi_flashoffset = 0; diff --git a/board/etin/debris/debris.c b/board/etin/debris/debris.c index 93c502c..08ed635 100644 --- a/board/etin/debris/debris.c +++ b/board/etin/debris/debris.c @@ -26,6 +26,8 @@ #include <pci.h> #include <i2c.h> +DECLARE_GLOBAL_DATA_PTR; + int checkboard (void) { /*TODO: Check processor type */ @@ -170,8 +172,6 @@ void nvram_write(long dest, const void *src, size_t count) int misc_init_r(void) { - DECLARE_GLOBAL_DATA_PTR; - /* Write ethernet addr in NVRAM for VxWorks */ nvram_write(CFG_ENV_ADDR + CFG_NVRAM_VXWORKS_OFFS, (char*)&gd->bd->bi_enetaddr[0], 6); diff --git a/board/etx094/etx094.c b/board/etx094/etx094.c index dba3c11..eb58b5d 100644 --- a/board/etx094/etx094.c +++ b/board/etx094/etx094.c @@ -24,6 +24,8 @@ #include <common.h> #include <mpc8xx.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ static long int dram_size (long int, long int *, long int); @@ -90,8 +92,6 @@ const uint sdram_table[] = { int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; - char *s = getenv ("serial#"); char *e; diff --git a/board/evb4510/evb4510.c b/board/evb4510/evb4510.c index 0008e5a..13abbb7 100644 --- a/board/evb4510/evb4510.c +++ b/board/evb4510/evb4510.c @@ -25,6 +25,8 @@ #include <asm/hardware.h> #include <command.h> +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_EVB4510 /* ------------------------------------------------------------------------- */ @@ -35,8 +37,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - icache_enable(); /* address for the kernel command line */ @@ -52,7 +52,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; #if CONFIG_NR_DRAM_BANKS == 2 diff --git a/board/evb64260/evb64260.c b/board/evb64260/evb64260.c index 6a9d164..ab59941 100644 --- a/board/evb64260/evb64260.c +++ b/board/evb64260/evb64260.c @@ -37,6 +37,9 @@ #include "mpsc.h" #include "i2c.h" #include "64260.h" + +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_ZUMA_V2 extern void zuma_mbox_init(void); #endif @@ -323,8 +326,6 @@ int misc_init_r (void) void after_reloc(ulong dest_addr) { - DECLARE_GLOBAL_DATA_PTR; - /* check to see if we booted from the sram. If so, move things * back to the way they should be. (we're running from main * memory at this point now */ diff --git a/board/evb64260/mpsc.c b/board/evb64260/mpsc.c index ee623ca..98ac7f6 100644 --- a/board/evb64260/mpsc.c +++ b/board/evb64260/mpsc.c @@ -32,6 +32,8 @@ #include <malloc.h> #include "mpsc.h" +DECLARE_GLOBAL_DATA_PTR; + int (*mpsc_putchar)(char ch) = mpsc_putchar_early; static volatile unsigned int *rx_desc_base=NULL; @@ -115,7 +117,6 @@ struct _tag_mirror_hack { int mpsc_putchar_early(char ch) { - DECLARE_GLOBAL_DATA_PTR; int mpsc=CHANNEL; int temp=GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP); galmpsc_set_tcschar(mpsc,ch); @@ -177,79 +178,82 @@ mpsc_putchar_sdma(char ch) return 0; } -char -mpsc_getchar(void) +char mpsc_getchar (void) { - DECLARE_GLOBAL_DATA_PTR; - static unsigned int done = 0; - volatile char ch; - unsigned int len=0, idx=0, temp; - - volatile unsigned int *p; - - - do { - p=&rx_desc_base[rx_desc_index*8]; - - INVALIDATE_DCACHE(&p[0], &p[1]); - /* Wait for character */ - while (p[1] & DESC_OWNER){ - udelay(100); - INVALIDATE_DCACHE(&p[0], &p[1]); - } - - /* Handle error case */ - if (p[1] & (1<<15)) { - printf("oops, error: %08x\n", p[1]); - - temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,CHANNEL,GALMPSC_REG_GAP); - temp |= (1 << 23); - GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2, CHANNEL,GALMPSC_REG_GAP, temp); - - /* Can't poll on abort bit, so we just wait. */ - udelay(100); + static unsigned int done = 0; + volatile char ch; + unsigned int len = 0, idx = 0, temp; - galsdma_enable_rx(); - } - - /* Number of bytes left in this descriptor */ - len = p[0] & 0xffff; - - if (len) { - /* Where to look */ - idx = 5; - if (done > 3) idx = 4; - if (done > 7) idx = 7; - if (done > 11) idx = 6; - - INVALIDATE_DCACHE(&p[idx], &p[idx+1]); - ch = p[idx] & 0xff; - done++; - } + volatile unsigned int *p; - if (done < len) { - /* this descriptor has more bytes still - * shift down the char we just read, and leave the - * buffer in place for the next time around - */ - p[idx] = p[idx] >> 8; - FLUSH_DCACHE(&p[idx], &p[idx+1]); - } - if (done == len) { - /* nothing left in this descriptor. - * go to next one - */ - p[1] = DESC_OWNER | DESC_FIRST | DESC_LAST; - p[0] = 0x00100000; - FLUSH_DCACHE(&p[0], &p[1]); - /* Next descriptor */ - rx_desc_index = (rx_desc_index + 1) % RX_DESC; - done = 0; - } - } while (len==0); /* galileo bug.. len might be zero */ - - return ch; + do { + p = &rx_desc_base[rx_desc_index * 8]; + + INVALIDATE_DCACHE (&p[0], &p[1]); + /* Wait for character */ + while (p[1] & DESC_OWNER) { + udelay (100); + INVALIDATE_DCACHE (&p[0], &p[1]); + } + + /* Handle error case */ + if (p[1] & (1 << 15)) { + printf ("oops, error: %08x\n", p[1]); + + temp = GTREGREAD_MIRROR (GALMPSC_CHANNELREG_2, + CHANNEL, GALMPSC_REG_GAP); + temp |= (1 << 23); + GT_REG_WRITE_MIRROR (GALMPSC_CHANNELREG_2, CHANNEL, + GALMPSC_REG_GAP, temp); + + /* Can't poll on abort bit, so we just wait. */ + udelay (100); + + galsdma_enable_rx (); + } + + /* Number of bytes left in this descriptor */ + len = p[0] & 0xffff; + + if (len) { + /* Where to look */ + idx = 5; + if (done > 3) + idx = 4; + if (done > 7) + idx = 7; + if (done > 11) + idx = 6; + + INVALIDATE_DCACHE (&p[idx], &p[idx + 1]); + ch = p[idx] & 0xff; + done++; + } + + if (done < len) { + /* this descriptor has more bytes still + * shift down the char we just read, and leave the + * buffer in place for the next time around + */ + p[idx] = p[idx] >> 8; + FLUSH_DCACHE (&p[idx], &p[idx + 1]); + } + + if (done == len) { + /* nothing left in this descriptor. + * go to next one + */ + p[1] = DESC_OWNER | DESC_FIRST | DESC_LAST; + p[0] = 0x00100000; + FLUSH_DCACHE (&p[0], &p[1]); + /* Next descriptor */ + rx_desc_index = (rx_desc_index + 1) % RX_DESC; + done = 0; + } + } while (len == 0); /* galileo bug.. len might be zero */ + + return ch; } int @@ -266,8 +270,6 @@ mpsc_test_char(void) int mpsc_init(int baud) { - DECLARE_GLOBAL_DATA_PTR; - memset(MIRROR_HACK, 0, sizeof(struct _tag_mirror_hack)); MIRROR_HACK->GALMPSC_ROUTING_REGISTER_M=0x3fffffff; @@ -382,7 +384,6 @@ mpsc_init2(void) int galbrg_set_baudrate(int channel, int rate) { - DECLARE_GLOBAL_DATA_PTR; int clock; galbrg_disable(channel); @@ -410,7 +411,6 @@ galbrg_set_baudrate(int channel, int rate) static int galbrg_set_CDV(int channel, int value) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP); @@ -424,7 +424,6 @@ galbrg_set_CDV(int channel, int value) static int galbrg_enable(int channel) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP); @@ -437,7 +436,6 @@ galbrg_enable(int channel) static int galbrg_disable(int channel) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG, channel, GALBRG_REG_GAP); @@ -450,7 +448,6 @@ galbrg_disable(int channel) static int galbrg_set_clksrc(int channel, int value) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR(GALBRG_0_CONFREG,channel, GALBRG_REG_GAP); @@ -583,7 +580,6 @@ galsdma_set_burstsize(int channel, unsigned int value) static int galmpsc_connect(int channel, int connect) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR_G(GALMPSC_ROUTING_REGISTER); @@ -629,7 +625,6 @@ galmpsc_route_serial(int channel, int connect) static int galmpsc_route_rx_clock(int channel, int brg) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR_G(GALMPSC_RxC_ROUTE); @@ -647,7 +642,6 @@ galmpsc_route_rx_clock(int channel, int brg) static int galmpsc_route_tx_clock(int channel, int brg) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR_G(GALMPSC_TxC_ROUTE); @@ -688,7 +682,6 @@ galmpsc_write_config_regs(int mpsc, int mode) static int galmpsc_config_channel_regs(int mpsc) { - DECLARE_GLOBAL_DATA_PTR; GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP, 0); GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP, 0); GT_REG_WRITE(GALMPSC_CHANNELREG_3+(mpsc*GALMPSC_REG_GAP), 1); @@ -709,7 +702,6 @@ galmpsc_config_channel_regs(int mpsc) static int galmpsc_set_brkcnt(int mpsc, int value) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP); @@ -723,7 +715,6 @@ galmpsc_set_brkcnt(int mpsc, int value) static int galmpsc_set_tcschar(int mpsc, int value) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_1,mpsc,GALMPSC_REG_GAP); @@ -737,7 +728,6 @@ galmpsc_set_tcschar(int mpsc, int value) static int galmpsc_set_char_length(int mpsc, int value) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR(GALMPSC_PROTOCONF_REG,mpsc,GALMPSC_REG_GAP); @@ -751,7 +741,6 @@ galmpsc_set_char_length(int mpsc, int value) static int galmpsc_set_stop_bit_length(int mpsc, int value) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR(GALMPSC_PROTOCONF_REG,mpsc,GALMPSC_REG_GAP); @@ -764,7 +753,6 @@ galmpsc_set_stop_bit_length(int mpsc, int value) static int galmpsc_set_parity(int mpsc, int value) { - DECLARE_GLOBAL_DATA_PTR; unsigned int temp; temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP); @@ -784,7 +772,6 @@ galmpsc_set_parity(int mpsc, int value) static int galmpsc_enter_hunt(int mpsc) { - DECLARE_GLOBAL_DATA_PTR; int temp; temp = GTREGREAD_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP); @@ -802,7 +789,6 @@ galmpsc_enter_hunt(int mpsc) static int galmpsc_shutdown(int mpsc) { - DECLARE_GLOBAL_DATA_PTR; #if 0 unsigned int temp; diff --git a/board/evb64260/sdram_init.c b/board/evb64260/sdram_init.c index 8d63c6f..fae6d10 100644 --- a/board/evb64260/sdram_init.c +++ b/board/evb64260/sdram_init.c @@ -35,6 +35,8 @@ #include "i2c.h" #include "64260.h" +DECLARE_GLOBAL_DATA_PTR; + /* #define DEBUG */ #define MAP_PCI @@ -199,7 +201,6 @@ static int check_dimm (uchar slot, sdram_info_t * info) * the array which is passed in with the relevant information */ static int check_dimm (uchar slot, sdram_info_t * info) { - DECLARE_GLOBAL_DATA_PTR; uchar addr = slot == 0 ? DIMM0_I2C_ADDR : DIMM1_I2C_ADDR; int ret; uchar rows, cols, sdram_banks, supp_cal, width, cal_val; diff --git a/board/evb64260/serial.c b/board/evb64260/serial.c index d9c7a15..191445c 100644 --- a/board/evb64260/serial.c +++ b/board/evb64260/serial.c @@ -39,6 +39,8 @@ #include "mpsc.h" +DECLARE_GLOBAL_DATA_PTR; + #if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2) const NS16550_t COM_PORTS[] = { (NS16550_t) CFG_NS16550_COM1, (NS16550_t) CFG_NS16550_COM2 }; @@ -48,8 +50,6 @@ const NS16550_t COM_PORTS[] = { (NS16550_t) CFG_NS16550_COM1, int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - #if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2) int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; #endif @@ -90,8 +90,6 @@ serial_tstc(void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - galbrg_set_baudrate(CONFIG_MPSC_PORT, gd->baudrate); } @@ -99,8 +97,6 @@ serial_setbrg (void) int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; #ifdef CFG_INIT_CHAN1 @@ -137,8 +133,6 @@ serial_tstc(void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; #ifdef CFG_INIT_CHAN1 diff --git a/board/ezkit533/ezkit533.c b/board/ezkit533/ezkit533.c index f8ee900..8d6c8de 100644 --- a/board/ezkit533/ezkit533.c +++ b/board/ezkit533/ezkit533.c @@ -30,6 +30,8 @@ #include "psd4256.h" #endif +DECLARE_GLOBAL_DATA_PTR; + int checkboard(void) { printf("CPU: ADSP BF533 Rev.: 0.%d\n", *pCHIPID >> 28); @@ -41,7 +43,6 @@ int checkboard(void) long int initdram(int board_type) { - DECLARE_GLOBAL_DATA_PTR; #ifdef DEBUG int brate; char *tmp = getenv("baudrate"); diff --git a/board/gcplus/gcplus.c b/board/gcplus/gcplus.c index 261e894..829b597 100644 --- a/board/gcplus/gcplus.c +++ b/board/gcplus/gcplus.c @@ -26,7 +26,8 @@ #include <common.h> #include <SA-1100.h> -/* ------------------------------------------------------------------------- */ + +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -35,8 +36,6 @@ int board_init(void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_arch_number = MACH_TYPE_GRAPHICSCLIENT; gd->bd->bi_boot_params = 0xc000003c; /* Weird address? */ @@ -62,8 +61,6 @@ board_init(void) int dram_init(void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; diff --git a/board/gen860t/fpga.c b/board/gen860t/fpga.c index 37788d5..2ba7e0e 100644 --- a/board/gen860t/fpga.c +++ b/board/gen860t/fpga.c @@ -32,6 +32,8 @@ #include <command.h> #include "fpga.h" +DECLARE_GLOBAL_DATA_PTR; + #if (CONFIG_FPGA) #if 0 @@ -189,8 +191,6 @@ void fpga_selectmap_init (void) */ int gen860t_init_fpga (void) { - DECLARE_GLOBAL_DATA_PTR; - int i; PRINTF ("%s:%d: Initialize FPGA interface (relocation offset = 0x%.8lx)\n", __FUNCTION__, __LINE__, gd->reloc_off); diff --git a/board/gen860t/gen860t.c b/board/gen860t/gen860t.c index b7a1b56..eb73221 100644 --- a/board/gen860t/gen860t.c +++ b/board/gen860t/gen860t.c @@ -30,6 +30,8 @@ #include "fpga.h" #include "ioport.h" +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_STATUS_LED #include <status_led.h> #endif @@ -126,8 +128,6 @@ const uint selectmap_upm_table[] = { */ int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; - char *s; char buf[64]; int i; @@ -305,5 +305,3 @@ int post_hotkeys_pressed (void) return 0; /* No hotkeys supported */ } #endif - -/* vim: set ts=4 sw=4 tw=78 : */ diff --git a/board/hermes/hermes.c b/board/hermes/hermes.c index e95d9ee..a523db1 100644 --- a/board/hermes/hermes.c +++ b/board/hermes/hermes.c @@ -32,6 +32,8 @@ # define SHOW_BOOT_PROGRESS(arg) #endif +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ static long int dram_size (long int, long int *, long int); @@ -105,8 +107,6 @@ const uint sdram_table[] = { int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; - char *s = getenv ("serial#"); char *e; diff --git a/board/hymod/bsp.c b/board/hymod/bsp.c index 0596fa4..6868f26 100644 --- a/board/hymod/bsp.c +++ b/board/hymod/bsp.c @@ -28,6 +28,8 @@ #include <net.h> #include <asm/iopin_8260.h> +DECLARE_GLOBAL_DATA_PTR; + /*----------------------------------------------------------------------- * Board Special Commands: FPGA load/store, EEPROM erase */ @@ -75,8 +77,6 @@ int fpga_load (int mezz, uchar *addr, ulong size) { - DECLARE_GLOBAL_DATA_PTR; - hymod_conf_t *cp = &gd->bd->bi_hymod_conf; xlx_info_t *fp; xlx_iopins_t *fpgaio; diff --git a/board/hymod/env.c b/board/hymod/env.c index f9e1421..062553b 100644 --- a/board/hymod/env.c +++ b/board/hymod/env.c @@ -23,6 +23,8 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + /* imports from fetch.c */ extern int fetch_and_parse (char *, ulong, int (*)(uchar *, uchar *)); @@ -32,8 +34,6 @@ static char *def_global_env_path = "/hymod/global_env"; static int env_callback (uchar *name, uchar *value) { - DECLARE_GLOBAL_DATA_PTR; - hymod_conf_t *cp = &gd->bd->bi_hymod_conf; char ov[CFG_CBSIZE], nv[CFG_CBSIZE], *p, *q, *nn, c, *curver, *newver; int override = 1, append = 0, remove = 0, nnl, ovl, nvl; diff --git a/board/hymod/hymod.c b/board/hymod/hymod.c index dea0a70..5e98e9e 100644 --- a/board/hymod/hymod.c +++ b/board/hymod/hymod.c @@ -30,6 +30,8 @@ #include <i2c.h> #include <asm/iopin_8260.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ /* imports from eeprom.c */ @@ -424,8 +426,6 @@ initdram (int board_type) int last_stage_init (void) { - DECLARE_GLOBAL_DATA_PTR; - hymod_conf_t *cp = &gd->bd->bi_hymod_conf; int rc; diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c index 44831c6..4197a7c 100644 --- a/board/icecube/icecube.c +++ b/board/icecube/icecube.c @@ -27,6 +27,7 @@ #include <common.h> #include <mpc5xxx.h> #include <pci.h> +#include <asm/processor.h> #if defined(CONFIG_LITE5200B) #include "mt46v32m16.h" @@ -89,6 +90,8 @@ long int initdram (int board_type) { ulong dramsize = 0; ulong dramsize2 = 0; + uint svr, pvr; + #ifndef CFG_RAMBOOT ulong test1, test2; @@ -183,6 +186,24 @@ long int initdram (int board_type) #endif /* CFG_RAMBOOT */ + /* + * On MPC5200B we need to set the special configuration delay in the + * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM + * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190: + * + * "The SDelay should be written to a value of 0x00000004. It is + * required to account for changes caused by normal wafer processing + * parameters." + */ + svr = get_svr(); + pvr = get_pvr(); + if ((SVR_MJREV(svr) >= 2) && + (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) { + + *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04; + __asm__ volatile ("sync"); + } + return dramsize + dramsize2; } diff --git a/board/ids8247/ids8247.c b/board/ids8247/ids8247.c index 081ef65..7b9a83d 100644 --- a/board/ids8247/ids8247.c +++ b/board/ids8247/ids8247.c @@ -25,6 +25,8 @@ #include <ioports.h> #include <mpc8260.h> +DECLARE_GLOBAL_DATA_PTR; + /* * I/O Port configuration table * @@ -295,8 +297,6 @@ long int initdram (int board_type) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_flashstart = 0xff800000; } diff --git a/board/impa7/impa7.c b/board/impa7/impa7.c index e496923..3230dd4 100644 --- a/board/impa7/impa7.c +++ b/board/impa7/impa7.c @@ -25,6 +25,8 @@ #include <common.h> #include <clps7111.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ @@ -34,8 +36,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* Activate LED flasher */ IO_LEDFLSH = 0x40; @@ -50,8 +50,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; diff --git a/board/innokom/innokom.c b/board/innokom/innokom.c index ae5402e..7f8f47c 100644 --- a/board/innokom/innokom.c +++ b/board/innokom/innokom.c @@ -27,6 +27,8 @@ #include <asm/arch/pxa-regs.h> #include <asm/mach-types.h> +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_SHOW_BOOT_PROGRESS # define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) #else @@ -95,8 +97,6 @@ int misc_init_r(void) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -116,8 +116,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/integratorap/integratorap.c b/board/integratorap/integratorap.c index d4f61d6..e659907 100644 --- a/board/integratorap/integratorap.c +++ b/board/integratorap/integratorap.c @@ -39,6 +39,8 @@ #include <pci.h> #endif +DECLARE_GLOBAL_DATA_PTR; + void flash__init (void); void ether__init (void); void peripheral_power_enable (void); @@ -65,8 +67,6 @@ static inline void delay (unsigned long loops) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* arch number of Integrator Board */ gd->bd->bi_arch_number = MACH_TYPE_INTEGRATOR; @@ -480,8 +480,6 @@ void ether__init (void) ******************************/ int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/integratorcp/integratorcp.c b/board/integratorcp/integratorcp.c index 216876b..d6d6e13 100644 --- a/board/integratorcp/integratorcp.c +++ b/board/integratorcp/integratorcp.c @@ -35,6 +35,8 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + void flash__init (void); void ether__init (void); void peripheral_power_enable (void); @@ -54,8 +56,6 @@ void show_boot_progress(int progress) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* arch number of Integrator Board */ gd->bd->bi_arch_number = MACH_TYPE_CINTEGRATOR; @@ -105,8 +105,6 @@ void ether__init (void) ******************************/ int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/ixdp425/ixdp425.c b/board/ixdp425/ixdp425.c index c04626a..aa96591 100644 --- a/board/ixdp425/ixdp425.c +++ b/board/ixdp425/ixdp425.c @@ -28,11 +28,7 @@ #include <asm/arch/ixp425.h> #include <common.h> -/* ------------------------------------------------------------------------- */ - - -/* local prototypes */ - +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -49,8 +45,6 @@ int board_post_init (void) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* arch number of IXDP */ gd->bd->bi_arch_number = MACH_TYPE_IXDP425; @@ -64,8 +58,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/kb9202/kb9202.c b/board/kb9202/kb9202.c index 4a7cf77..ec51dca 100644 --- a/board/kb9202/kb9202.c +++ b/board/kb9202/kb9202.c @@ -31,7 +31,8 @@ #include <at91rm9200_net.h> #include <lxt971a.h> -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; + /* * Miscelaneous platform dependent initialisations */ @@ -42,8 +43,6 @@ void lowlevel_init(void) { int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* Enable Ctrlc */ console_init_f (); @@ -60,8 +59,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM; gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; return 0; diff --git a/board/kup/kup4k/kup4k.c b/board/kup/kup4k/kup4k.c index e621c43..4e377a1 100644 --- a/board/kup/kup4k/kup4k.c +++ b/board/kup/kup4k/kup4k.c @@ -29,6 +29,8 @@ #include "s1d13706.h" #endif +DECLARE_GLOBAL_DATA_PTR; + #undef DEBUG #ifdef DEBUG # define debugk(fmt,args...) printf(fmt ,##args) @@ -44,10 +46,6 @@ typedef struct { /* ------------------------------------------------------------------------- */ -#if 0 -static long int dram_size (long int, long int *, long int); -#endif - #ifdef CONFIG_KUP4K_LOGO void lcd_logo(bd_t *bd); #endif @@ -235,62 +233,8 @@ long int initdram (int board_type) /* ------------------------------------------------------------------------- */ -/* - * Check memory range for valid RAM. A simple memory test determines - * the actually available RAM size between addresses `base' and - * `base + maxsize'. Some (not all) hardware errors are detected: - * - short between address lines - * - short between data lines - */ -#if 0 -static long int dram_size (long int mamr_value, long int *base, - long int maxsize) -{ - volatile immap_t *immap = (immap_t *) CFG_IMMR; - volatile memctl8xx_t *memctl = &immap->im_memctl; - volatile long int *addr; - ulong cnt, val; - ulong save[32]; /* to make test non-destructive */ - unsigned char i = 0; - - memctl->memc_mamr = mamr_value; - - for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ - - save[i++] = *addr; - *addr = ~cnt; - } - - /* write 0 to base address */ - addr = base; - save[i] = *addr; - *addr = 0; - - /* check at base address */ - if ((val = *addr) != 0) { - *addr = save[i]; - return (0); - } - - for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ - - val = *addr; - *addr = save[--i]; - - if (val != (~cnt)) { - return (cnt * sizeof (long)); - } - } - return (maxsize); -} -#endif - int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - #ifdef CONFIG_STATUS_LED volatile immap_t *immap = (immap_t *) CFG_IMMR; #endif diff --git a/board/lart/lart.c b/board/lart/lart.c index 66b730d..8d534c8 100644 --- a/board/lart/lart.c +++ b/board/lart/lart.c @@ -24,6 +24,8 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ @@ -33,8 +35,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -49,7 +49,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; bd_t *bd = gd->bd; bd->bi_dram[0].start = PHYS_SDRAM_1; diff --git a/board/logodl/logodl.c b/board/logodl/logodl.c index 95634ac..14fd28f 100644 --- a/board/logodl/logodl.c +++ b/board/logodl/logodl.c @@ -25,6 +25,8 @@ #include <common.h> #include <asm/arch/pxa-regs.h> +DECLARE_GLOBAL_DATA_PTR; + /** * board_init: - setup some data structures * @@ -33,8 +35,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -57,8 +57,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/lpd7a40x/lpd7a40x.c b/board/lpd7a40x/lpd7a40x.c index 4c373ee..e12bbf0 100644 --- a/board/lpd7a40x/lpd7a40x.c +++ b/board/lpd7a40x/lpd7a40x.c @@ -37,14 +37,14 @@ #include <lpd7a400_cpld.h> +DECLARE_GLOBAL_DATA_PTR; + /* * Miscellaneous platform dependent initialisations */ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* set up the I/O ports */ /* enable flash programming */ @@ -74,8 +74,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/lubbock/lubbock.c b/board/lubbock/lubbock.c index e618ab9..5829170 100644 --- a/board/lubbock/lubbock.c +++ b/board/lubbock/lubbock.c @@ -27,8 +27,7 @@ #include <common.h> -/* ------------------------------------------------------------------------- */ - +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -36,8 +35,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -60,8 +57,6 @@ int board_late_init(void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; diff --git a/board/lwmon/lwmon.c b/board/lwmon/lwmon.c index a174b57..9e8ea2d 100644 --- a/board/lwmon/lwmon.c +++ b/board/lwmon/lwmon.c @@ -45,6 +45,8 @@ V* Verification: dzu@denx.de #include <linux/types.h> #include <linux/string.h> /* for strdup */ +DECLARE_GLOBAL_DATA_PTR; + /*------------------------ Local prototypes ---------------------------*/ static long int dram_size (long int, long int *, long int); static void kbd_init (void); @@ -455,8 +457,6 @@ Z* for the lwmon board. ***********************************************************************/ int board_postclk_init (void) { - DECLARE_GLOBAL_DATA_PTR; - kbd_init(); #ifdef CONFIG_MODEM_SUPPORT @@ -471,15 +471,11 @@ int board_postclk_init (void) struct serial_device * default_serial_console (void) { - DECLARE_GLOBAL_DATA_PTR; - return gd->do_mdm_init ? &serial_scc_device : &serial_smc_device; } static void kbd_init (void) { - DECLARE_GLOBAL_DATA_PTR; - uchar kbd_data[KEYBD_DATALEN]; uchar tmp_data[KEYBD_DATALEN]; uchar val, errcd; @@ -571,8 +567,6 @@ V* Verification: dzu@denx.de ***********************************************************************/ int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - uchar kbd_data[KEYBD_DATALEN]; char keybd_env[2 * KEYBD_DATALEN + 1]; uchar kbd_init_status = gd->kbd_status >> 8; diff --git a/board/mcc200/mcc200.c b/board/mcc200/mcc200.c index d1c99fd..5fe239f 100644 --- a/board/mcc200/mcc200.c +++ b/board/mcc200/mcc200.c @@ -30,6 +30,8 @@ #include "mt48lc8m32b2-6-7.h" +DECLARE_GLOBAL_DATA_PTR; + extern flash_info_t flash_info[]; /* FLASH chips info */ ulong flash_get_size (ulong base, int banknum); @@ -190,8 +192,6 @@ int checkboard (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - /* * Adjust flash start and offset to detected values */ @@ -238,6 +238,16 @@ int misc_init_r (void) &flash_info[CFG_MAX_FLASH_BANKS - 1]); } + if (gd->bd->bi_flashsize > (32 << 20)) { + /* Unprotect the upper bank of the Flash */ + *(volatile int*)MPC5XXX_CS0_CFG |= (1 << 6); + flash_protect (FLAG_PROTECT_CLEAR, + flash_info[0].start[0], + (flash_info[0].start[0] + flash_info[0].size) / 2 - 1, + &flash_info[0]); + *(volatile int*)MPC5XXX_CS0_CFG &= ~(1 << 6); + } + return (0); } diff --git a/board/ml2/serial.c b/board/ml2/serial.c index 92baba9..74687f1 100644 --- a/board/ml2/serial.c +++ b/board/ml2/serial.c @@ -29,70 +29,59 @@ #include <ns16550.h> #endif -#if 0 -#include "serial.h" -#endif +DECLARE_GLOBAL_DATA_PTR; #if (defined CFG_INIT_CHAN1) || (defined CFG_INIT_CHAN2) const NS16550_t COM_PORTS[] = { (NS16550_t) CFG_NS16550_COM1, - (NS16550_t) CFG_NS16550_COM2 }; + (NS16550_t) CFG_NS16550_COM2 +}; #endif -int -serial_init (void) +int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - - int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; + int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; #ifdef CFG_INIT_CHAN1 - (void)NS16550_init(COM_PORTS[0], clock_divisor); + (void) NS16550_init (COM_PORTS[0], clock_divisor); #endif #ifdef CFG_INIT_CHAN2 - (void)NS16550_init(COM_PORTS[1], clock_divisor); + (void) NS16550_init (COM_PORTS[1], clock_divisor); #endif - return 0; + return 0; } -void -serial_putc(const char c) +void serial_putc (const char c) { - if (c == '\n') - NS16550_putc(COM_PORTS[CFG_DUART_CHAN], '\r'); + if (c == '\n') + NS16550_putc (COM_PORTS[CFG_DUART_CHAN], '\r'); - NS16550_putc(COM_PORTS[CFG_DUART_CHAN], c); + NS16550_putc (COM_PORTS[CFG_DUART_CHAN], c); } -int -serial_getc(void) +int serial_getc (void) { - return NS16550_getc(COM_PORTS[CFG_DUART_CHAN]); + return NS16550_getc (COM_PORTS[CFG_DUART_CHAN]); } -int -serial_tstc(void) +int serial_tstc (void) { - return NS16550_tstc(COM_PORTS[CFG_DUART_CHAN]); + return NS16550_tstc (COM_PORTS[CFG_DUART_CHAN]); } -void -serial_setbrg (void) +void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - - int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; + int clock_divisor = CFG_NS16550_CLK / 16 / gd->baudrate; #ifdef CFG_INIT_CHAN1 - NS16550_reinit(COM_PORTS[0], clock_divisor); + NS16550_reinit (COM_PORTS[0], clock_divisor); #endif #ifdef CFG_INIT_CHAN2 - NS16550_reinit(COM_PORTS[1], clock_divisor); + NS16550_reinit (COM_PORTS[1], clock_divisor); #endif } -void -serial_puts (const char *s) +void serial_puts (const char *s) { while (*s) { serial_putc (*s++); @@ -100,32 +89,27 @@ serial_puts (const char *s) } #if (CONFIG_COMMANDS & CFG_CMD_KGDB) -void -kgdb_serial_init(void) +void kgdb_serial_init (void) { } -void -putDebugChar (int c) +void putDebugChar (int c) { serial_putc (c); } -void -putDebugStr (const char *str) +void putDebugStr (const char *str) { serial_puts (str); } -int -getDebugChar (void) +int getDebugChar (void) { - return serial_getc(); + return serial_getc (); } -void -kgdb_interruptible (int yes) +void kgdb_interruptible (int yes) { return; } -#endif /* CFG_CMD_KGDB */ +#endif /* CFG_CMD_KGDB */ diff --git a/board/modnet50/modnet50.c b/board/modnet50/modnet50.c index 448c623..4544069 100644 --- a/board/modnet50/modnet50.c +++ b/board/modnet50/modnet50.c @@ -24,8 +24,7 @@ #include <common.h> -/* ------------------------------------------------------------------------- */ - +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -33,7 +32,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; /* address for the kernel command line */ gd->bd->bi_boot_params = 0x800; return 0; @@ -41,7 +39,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; if (CONFIG_NR_DRAM_BANKS == 2) { diff --git a/board/mp2usb/mp2usb.c b/board/mp2usb/mp2usb.c index e75be1e..486d44c 100644 --- a/board/mp2usb/mp2usb.c +++ b/board/mp2usb/mp2usb.c @@ -31,15 +31,14 @@ #include <dm9161.h> #include <asm/mach-types.h> -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; + /* * Miscelaneous platform dependent initialisations */ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* Enable Ctrlc */ console_init_f (); @@ -56,8 +55,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM; gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; return 0; diff --git a/board/mpc8349ads/mpc8349ads.c b/board/mpc8349ads/mpc8349ads.c index 505acbc..9841298 100644 --- a/board/mpc8349ads/mpc8349ads.c +++ b/board/mpc8349ads/mpc8349ads.c @@ -64,7 +64,7 @@ long int initdram (int board_type) /* DDR SDRAM - Main SODIMM */ im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR; #if defined(CONFIG_SPD_EEPROM) - msize = spd_sdram(NULL); + msize = spd_sdram(); #else msize = fixed_sdram(); #endif diff --git a/board/mpc8349ads/pci.c b/board/mpc8349ads/pci.c index c559424..319e35c 100644 --- a/board/mpc8349ads/pci.c +++ b/board/mpc8349ads/pci.c @@ -26,6 +26,8 @@ #include <asm/mpc8349_pci.h> #include <i2c.h> +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_PCI /* System RAM mapped to PCI space */ @@ -127,7 +129,6 @@ pib_init(void) void pci_init_board(void) { - DECLARE_GLOBAL_DATA_PTR; volatile immap_t * immr; volatile clk8349_t * clk; volatile law8349_t * pci_law; diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c index b331d6e..06d021a 100644 --- a/board/mpl/common/common_util.c +++ b/board/mpl/common/common_util.c @@ -42,6 +42,9 @@ #include "../mip405/mip405.h" #include <405gp_pci.h> #endif + +DECLARE_GLOBAL_DATA_PTR; + #if defined(CONFIG_PATI) #define FIRM_START 0xFFF00000 #endif @@ -584,7 +587,6 @@ extern int get_boot_mode(void); void video_get_info_str (int line_number, char *info) { /* init video info strings for graphic console */ - DECLARE_GLOBAL_DATA_PTR; PPC405_SYS_INFO sys_info; char rev; int i,boot; diff --git a/board/mpl/common/memtst.c b/board/mpl/common/memtst.c index 2c77d37..ff1190a 100644 --- a/board/mpl/common/memtst.c +++ b/board/mpl/common/memtst.c @@ -50,13 +50,15 @@ int testdram (void) #include <asm/processor.h> #include <405gp_i2c.h> +DECLARE_GLOBAL_DATA_PTR; + #define FALSE 0 #define TRUE 1 -#define TEST_QUIET 8 +#define TEST_QUIET 8 #define TEST_SHOW_PROG 4 #define TEST_SHOW_ERR 2 -#define TEST_SHOW_ALL 1 +#define TEST_SHOW_ALL 1 #define TESTPAT1 0xAA55AA55 #define TESTPAT2 0x55AA55AA @@ -468,7 +470,6 @@ static RAM_MEMTEST_FUNC test_stage[TEST_STAGES] = { void mem_test_reloc(void) { - DECLARE_GLOBAL_DATA_PTR; unsigned long addr; int i; for (i=0; i< TEST_STAGES; i++) { diff --git a/board/mpl/common/pci.c b/board/mpl/common/pci.c index 692930b..bde14be 100644 --- a/board/mpl/common/pci.c +++ b/board/mpl/common/pci.c @@ -32,7 +32,7 @@ #ifdef CONFIG_405GP #ifdef CONFIG_PCI -#undef DEBUG +DECLARE_GLOBAL_DATA_PTR; #include "piix4_pci.h" #include "pci_parts.h" @@ -94,7 +94,6 @@ static struct pci_controller hose = { static void reloc_pci_cfg_table(struct pci_config_table *table) { - DECLARE_GLOBAL_DATA_PTR; unsigned long addr; for (; table && table->vendor; table++) { diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c index 9c469b0..34f3289 100644 --- a/board/mpl/mip405/mip405.c +++ b/board/mpl/mip405/mip405.c @@ -70,6 +70,9 @@ #include "../common/common_util.h" #include <i2c.h> #include <rtc.h> + +DECLARE_GLOBAL_DATA_PTR; + extern block_dev_desc_t * scsi_get_dev(int dev); extern block_dev_desc_t * ide_get_dev(int dev); @@ -189,8 +192,6 @@ const sdram_t sdram_table[] = { void SDRAM_err (const char *s) { #ifndef SDRAM_DEBUG - DECLARE_GLOBAL_DATA_PTR; - (void) get_clocks (); gd->baudrate = 9600; serial_init (); @@ -241,8 +242,6 @@ void write_4hex (unsigned long val) int init_sdram (void) { - DECLARE_GLOBAL_DATA_PTR; - unsigned long tmp, baseaddr; unsigned short i; unsigned char trp_clocks, @@ -681,7 +680,6 @@ extern flash_info_t flash_info[]; /* info for FLASH chips */ int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; /* adjust flash start and size as well as the offset */ gd->bd->bi_flashstart=0-flash_info[0].size; gd->bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN; diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c index a398362..3828608 100644 --- a/board/mpl/pip405/pip405.c +++ b/board/mpl/pip405/pip405.c @@ -31,6 +31,8 @@ #include "../common/isa.h" #include "../common/common_util.h" +DECLARE_GLOBAL_DATA_PTR; + #undef SDRAM_DEBUG #define FALSE 0 @@ -134,8 +136,6 @@ unsigned short NSto10PS (unsigned char spd_byte) void SDRAM_err (const char *s) { #ifndef SDRAM_DEBUG - DECLARE_GLOBAL_DATA_PTR; - (void) get_clocks (); gd->baudrate = 9600; serial_init (); @@ -191,9 +191,6 @@ int board_early_init_f (void) trc_clocks, tctp_clocks; unsigned char cal_index, cal_val, spd_version, spd_chksum; unsigned char buf[8]; -#ifdef SDRAM_DEBUG - DECLARE_GLOBAL_DATA_PTR; -#endif /* set up the config port */ mtdcr (ebccfga, pb7ap); mtdcr (ebccfgd, CONFIG_PORT_AP); @@ -613,8 +610,6 @@ static int test_dram (unsigned long ramsize); long int initdram (int board_type) { - DECLARE_GLOBAL_DATA_PTR; - unsigned long bank_reg[4], tmp, bank_size; int i, ds; unsigned long TotalSize; @@ -666,7 +661,6 @@ extern flash_info_t flash_info[]; /* info for FLASH chips */ int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; /* adjust flash start and size as well as the offset */ gd->bd->bi_flashstart=0-flash_info[0].size; gd->bd->bi_flashsize=flash_info[0].size-CFG_MONITOR_LEN; diff --git a/board/mpl/vcma9/vcma9.c b/board/mpl/vcma9/vcma9.c index ffdba5d..0d2003d 100644 --- a/board/mpl/vcma9/vcma9.c +++ b/board/mpl/vcma9/vcma9.c @@ -32,7 +32,7 @@ #include "vcma9.h" #include "../common/common_util.h" -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; #define FCLK_SPEED 1 @@ -71,7 +71,6 @@ static inline void delay(unsigned long loops) int board_init(void) { - DECLARE_GLOBAL_DATA_PTR; S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); @@ -275,8 +274,6 @@ static void Show_VCMA9_Info(char *board_name, char *serial) int dram_init(void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = Get_SDRAM_ChipSize() * Get_SDRAM_ChipNr(); diff --git a/board/mvblue/mvblue.c b/board/mvblue/mvblue.c index 20a551d..ee8f3e3 100644 --- a/board/mvblue/mvblue.c +++ b/board/mvblue/mvblue.c @@ -14,6 +14,8 @@ #include <pci.h> #endif +DECLARE_GLOBAL_DATA_PTR; + u32 get_BoardType (void); #define PCI_CONFIG(b,d,f,r) cpu_to_le32(0x80000000 | ((b&0xff)<<16) \ @@ -50,7 +52,6 @@ void hw_watchdog_reset (void) } int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; ulong busfreq = get_bus_freq (0); char buf[32]; u32 BoardType = get_BoardType (); diff --git a/board/mx1ads/mx1ads.c b/board/mx1ads/mx1ads.c index 5c33ba3..913f95c 100644 --- a/board/mx1ads/mx1ads.c +++ b/board/mx1ads/mx1ads.c @@ -27,7 +27,7 @@ /*#include <mc9328.h>*/ #include <asm/arch/imx-regs.h> -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; #define FCLK_SPEED 1 @@ -55,10 +55,11 @@ #if 0 -static inline void delay (unsigned long loops) { +static inline void delay (unsigned long loops) +{ __asm__ volatile ("1:\n" - "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0" (loops)); + "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0" (loops)); } #endif @@ -67,62 +68,58 @@ static inline void delay (unsigned long loops) { * Miscellaneous platform dependent initialisations */ -void SetAsynchMode(void) { - __asm__ ( - "mrc p15,0,r0,c1,c0,0 \n" - "mov r2, #0xC0000000 \n" - "orr r0,r2,r0 \n" - "mcr p15,0,r0,c1,c0,0 \n" - ); +void SetAsynchMode (void) +{ + __asm__ ("mrc p15,0,r0,c1,c0,0 \n" + "mov r2, #0xC0000000 \n" + "orr r0,r2,r0 \n" "mcr p15,0,r0,c1,c0,0 \n"); } static u32 mc9328sid; -int board_init (void) { +int board_init (void) +{ + volatile unsigned int tmp; - DECLARE_GLOBAL_DATA_PTR; + mc9328sid = SIDR; - volatile unsigned int tmp; + GPCR = 0x000003AB; /* I/O pad driving strength */ - mc9328sid = SIDR; - - GPCR = 0x000003AB; /* I/O pad driving strength */ - -/* MX1_CS1U = 0x00000A00; */ /* SRAM initialization */ + /* MX1_CS1U = 0x00000A00; *//* SRAM initialization */ /* MX1_CS1L = 0x11110601; */ - MPCTL0 = 0x04632410; /* setting for 150 MHz MCU PLL CLK */ + MPCTL0 = 0x04632410; /* setting for 150 MHz MCU PLL CLK */ /* set FCLK divider 1 (i.e. FCLK to MCU PLL CLK) and * BCLK divider to 2 (i.e. BCLK to 48 MHz) */ - CSCR = 0xAF000403; + CSCR = 0xAF000403; - CSCR |= 0x00200000; /* Trigger the restart bit(bit 21) */ - CSCR &= 0xFFFF7FFF; /* Program PRESC bit(bit 15) to 0 to divide-by-1 */ + CSCR |= 0x00200000; /* Trigger the restart bit(bit 21) */ + CSCR &= 0xFFFF7FFF; /* Program PRESC bit(bit 15) to 0 to divide-by-1 */ /* setup cs4 for cs8900 ethernet */ - CS4U = 0x00000F00; /* Initialize CS4 for CS8900 ethernet */ - CS4L = 0x00001501; + CS4U = 0x00000F00; /* Initialize CS4 for CS8900 ethernet */ + CS4L = 0x00001501; - GIUS(0) &= 0xFF3FFFFF; - GPR(0) &= 0xFF3FFFFF; + GIUS (0) &= 0xFF3FFFFF; + GPR (0) &= 0xFF3FFFFF; - tmp = *(unsigned int *)(0x1500000C); - tmp = *(unsigned int *)(0x1500000C); + tmp = *(unsigned int *) (0x1500000C); + tmp = *(unsigned int *) (0x1500000C); - SetAsynchMode(); + SetAsynchMode (); gd->bd->bi_arch_number = MACH_TYPE_MX1ADS; - gd->bd->bi_boot_params = 0x08000100; /* adress of boot parameters */ + gd->bd->bi_boot_params = 0x08000100; /* adress of boot parameters */ - icache_enable(); - dcache_enable(); + icache_enable (); + dcache_enable (); /* set PERCLKs */ - PCDR = 0x00000055; /* set PERCLKS */ + PCDR = 0x00000055; /* set PERCLKS */ /* PERCLK3 is only used by SSI so the SSI driver can set it any value it likes * PERCLK1 and PERCLK2 are shared so DO NOT change it in any other place @@ -135,34 +132,38 @@ int board_init (void) { return 0; } -int board_late_init(void) { - - setenv("stdout", "serial"); - setenv("stderr", "serial"); - - switch (mc9328sid) { - case 0x0005901d : - printf ("MX1ADS board with MC9328 MX1 (0L44N), Silicon ID 0x%08x \n\n",mc9328sid); - break; - case 0x04d4c01d : - printf ("MX1ADS board with MC9328 MXL (1L45N), Silicon ID 0x%08x \n\n",mc9328sid); - break; - case 0x00d4c01d : - printf ("MX1ADS board with MC9328 MXL (2L45N), Silicon ID 0x%08x \n\n",mc9328sid); - break; - - default : - printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n",mc9328sid); - break; +int board_late_init (void) +{ + + setenv ("stdout", "serial"); + setenv ("stderr", "serial"); + + switch (mc9328sid) { + case 0x0005901d: + printf ("MX1ADS board with MC9328 MX1 (0L44N), Silicon ID 0x%08x \n\n", + mc9328sid); + break; + case 0x04d4c01d: + printf ("MX1ADS board with MC9328 MXL (1L45N), Silicon ID 0x%08x \n\n", + mc9328sid); + break; + case 0x00d4c01d: + printf ("MX1ADS board with MC9328 MXL (2L45N), Silicon ID 0x%08x \n\n", + mc9328sid); + break; + + default: + printf ("MX1ADS board with UNKNOWN MC9328 cpu, Silicon ID 0x%08x \n", + mc9328sid); + break; } return 0; } -int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - +int dram_init (void) +{ gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; return 0; } diff --git a/board/mx1fs2/mx1fs2.c b/board/mx1fs2/mx1fs2.c index 9e7a06c..1c026f0 100644 --- a/board/mx1fs2/mx1fs2.c +++ b/board/mx1fs2/mx1fs2.c @@ -19,9 +19,10 @@ */ #include <common.h> - #include <asm/arch/imx-regs.h> +DECLARE_GLOBAL_DATA_PTR; + #define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) extern void imx_gpio_mode(int gpio_mode); @@ -79,8 +80,6 @@ static void logo_init(void) int board_init(void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_arch_number = MACH_TYPE_MX1FS2; gd->bd->bi_boot_params = 0x08000100; serial_init(); @@ -91,8 +90,6 @@ serial_init(); int dram_init(void) { - DECLARE_GLOBAL_DATA_PTR; - #if ( CONFIG_NR_DRAM_BANKS > 0 ) gd->bd->bi_dram[0].start = MX1FS2_SDRAM_1; gd->bd->bi_dram[0].size = MX1FS2_SDRAM_1_SIZE; diff --git a/board/nc650/flash.c b/board/nc650/flash.c index ce2f83b..8d7c172 100644 --- a/board/nc650/flash.c +++ b/board/nc650/flash.c @@ -32,6 +32,8 @@ #include <common.h> #include <mpc8xx.h> +DECLARE_GLOBAL_DATA_PTR; + #ifndef CFG_OR_TIMING_FLASH_AT_50MHZ #define CFG_OR_TIMING_FLASH_AT_50MHZ (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ OR_SCY_2_CLK | OR_EHTR | OR_BI) @@ -95,8 +97,6 @@ unsigned long flash_init (void) #ifdef CFG_OR_TIMING_FLASH_AT_50MHZ int scy, trlx, flash_or_timing, clk_diff; - DECLARE_GLOBAL_DATA_PTR; - scy = (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_SCY_MSK) >> 4; if (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_TRLX) { trlx = OR_TRLX; diff --git a/board/netstar/netstar.c b/board/netstar/netstar.c index 62615e5..4b7eba1 100644 --- a/board/netstar/netstar.c +++ b/board/netstar/netstar.c @@ -22,10 +22,10 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + int board_init(void) { - DECLARE_GLOBAL_DATA_PTR; - /* arch number of NetStar board */ /* TODO: use define from asm/mach-types.h */ gd->bd->bi_arch_number = 692; @@ -38,8 +38,6 @@ int board_init(void) int dram_init(void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/ns9750dev/ns9750dev.c b/board/ns9750dev/ns9750dev.c index ea00d5a..1dd348a 100644 --- a/board/ns9750dev/ns9750dev.c +++ b/board/ns9750dev/ns9750dev.c @@ -41,6 +41,8 @@ # include <./ns9750_bbus.h> #endif +DECLARE_GLOBAL_DATA_PTR; + void flash__init( void ); void ether__init( void ); @@ -60,8 +62,6 @@ static inline void delay( unsigned long loops ) int board_init( void ) { - DECLARE_GLOBAL_DATA_PTR; - /* Active BBUS modules */ *get_bbus_reg_addr( NS9750_BBUS_MASTER_RESET ) = 0; @@ -114,8 +114,6 @@ void ether__init (void) ******************************/ int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/nx823/nx823.c b/board/nx823/nx823.c index 65d45c1..4a426ec 100644 --- a/board/nx823/nx823.c +++ b/board/nx823/nx823.c @@ -28,12 +28,10 @@ #include <malloc.h> #include <mpc8xx.h> -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; static long int dram_size (long int, long int *, long int); -/* ------------------------------------------------------------------------- */ - #define _NOT_USED_ 0xFFFFFFFF const uint sdram_table[] = { @@ -366,8 +364,6 @@ u_long *my_sernum; int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - char tmp[50]; u_char *e = gd->bd->bi_enetaddr; @@ -387,8 +383,6 @@ int misc_init_r (void) void load_sernum_ethaddr (void) { - DECLARE_GLOBAL_DATA_PTR; - int i; bd_t *bd = gd->bd; diff --git a/board/omap1510inn/omap1510innovator.c b/board/omap1510inn/omap1510innovator.c index f037f42..8941209 100644 --- a/board/omap1510inn/omap1510innovator.c +++ b/board/omap1510inn/omap1510innovator.c @@ -31,6 +31,8 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + static void flash__init (void); static void ether__init (void); @@ -47,8 +49,6 @@ static inline void delay (unsigned long loops) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* arch number of OMAP 1510-Board */ gd->bd->bi_arch_number = MACH_TYPE_OMAP_INNOVATOR; @@ -122,8 +122,6 @@ static void ether__init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/omap1610inn/omap1610innovator.c b/board/omap1610inn/omap1610innovator.c index 7842518..8dbe686 100644 --- a/board/omap1610inn/omap1610innovator.c +++ b/board/omap1610inn/omap1610innovator.c @@ -36,6 +36,8 @@ #include <./configs/omap1510.h> #endif +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_CS_AUTOBOOT unsigned long omap_flash_base; #endif @@ -60,8 +62,6 @@ static inline void delay (unsigned long loops) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - if (machine_is_omap_h2()) gd->bd->bi_arch_number = MACH_TYPE_OMAP_H2; else if (machine_is_omap_innovator()) @@ -153,8 +153,6 @@ void ether__init (void) ******************************/ int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/omap2420h4/omap2420h4.c b/board/omap2420h4/omap2420h4.c index 2387176..f7f75e0 100644 --- a/board/omap2420h4/omap2420h4.c +++ b/board/omap2420h4/omap2420h4.c @@ -36,7 +36,9 @@ extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; #endif - void wait_for_command_complete(unsigned int wd_base); +DECLARE_GLOBAL_DATA_PTR; + +void wait_for_command_complete(unsigned int wd_base); /******************************************************* * Routine: delay @@ -54,8 +56,6 @@ static inline void delay (unsigned long loops) *****************************************/ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gpmc_init(); /* in SRAM or SDRM, finish GPMC */ gd->bd->bi_arch_number = MACH_TYPE_OMAP_H4; /* board id for linux */ @@ -195,7 +195,6 @@ void ether_init (void) **********************************************/ int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; unsigned int size0=0,size1=0; u32 mtype, btype, rev, cpu; u8 chg_on = 0x5; /* enable charge of back up battery */ diff --git a/board/omap5912osk/omap5912osk.c b/board/omap5912osk/omap5912osk.c index 1faa084..e9e6b0e 100644 --- a/board/omap5912osk/omap5912osk.c +++ b/board/omap5912osk/omap5912osk.c @@ -38,6 +38,8 @@ #include <./configs/omap1510.h> #endif +DECLARE_GLOBAL_DATA_PTR; + void flash__init (void); void ether__init (void); void set_muxconf_regs (void); @@ -58,8 +60,6 @@ static inline void delay (unsigned long loops) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_arch_number = MACH_TYPE_OMAP_OSK; /* adress of boot parameters */ @@ -136,8 +136,6 @@ void ether__init (void) ******************************/ int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/omap730p2/omap730p2.c b/board/omap730p2/omap730p2.c index 256c6a6..309d667 100644 --- a/board/omap730p2/omap730p2.c +++ b/board/omap730p2/omap730p2.c @@ -34,6 +34,8 @@ #include <./configs/omap730.h> #endif +DECLARE_GLOBAL_DATA_PTR; + int test_boot_mode(void); void spin_up_leds(void); void flash__init (void); @@ -84,8 +86,6 @@ void toggle_backup_led(void) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* arch number of OMAP 730 P2 Board - Same as the Innovator! */ gd->bd->bi_arch_number = MACH_TYPE_OMAP_PERSEUS2; @@ -180,8 +180,6 @@ void ether__init (void) ******************************/ int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/oxc/oxc.c b/board/oxc/oxc.c index fa7ff02..6cc3cc5 100644 --- a/board/oxc/oxc.c +++ b/board/oxc/oxc.c @@ -26,6 +26,8 @@ #include <pci.h> #include <i2c.h> +DECLARE_GLOBAL_DATA_PTR; + int checkboard (void) { puts ( "Board: OXC8240\n" ); @@ -184,8 +186,6 @@ int misc_init_r (void) #ifdef CFG_OXC_GENERATE_IP { - DECLARE_GLOBAL_DATA_PTR; - char str[32]; unsigned long ip = CFG_OXC_IPMASK; bd_t *bd = gd->bd; diff --git a/board/pcippc2/fpga_serial.c b/board/pcippc2/fpga_serial.c index 579bfc7..5f89d9b 100644 --- a/board/pcippc2/fpga_serial.c +++ b/board/pcippc2/fpga_serial.c @@ -29,6 +29,8 @@ #include "hardware.h" #include "pcippc2.h" +DECLARE_GLOBAL_DATA_PTR; + /* 8 data, 1 stop, no parity */ #define LCRVAL 0x03 @@ -92,8 +94,6 @@ int fpga_serial_tstc (void) void fpga_serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - int clock_divisor = 115200 / gd->baudrate; fpga_serial_wait (); diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c index 231b505..a216c55 100644 --- a/board/pcippc2/pcippc2.c +++ b/board/pcippc2/pcippc2.c @@ -34,6 +34,8 @@ #include "sconsole.h" #include "fpga_serial.h" +DECLARE_GLOBAL_DATA_PTR; + #if defined(CONFIG_WATCHDOG) static int pcippc2_wdt_init_done = 0; @@ -108,8 +110,6 @@ int board_early_init_f (void) void after_reloc (ulong dest_addr) { - DECLARE_GLOBAL_DATA_PTR; - /* Jump to the main U-Boot board init code */ board_init_r ((gd_t *)gd, dest_addr); diff --git a/board/pcippc2/sconsole.c b/board/pcippc2/sconsole.c index a9f2b29..3b19069 100644 --- a/board/pcippc2/sconsole.c +++ b/board/pcippc2/sconsole.c @@ -26,6 +26,8 @@ #include "sconsole.h" +DECLARE_GLOBAL_DATA_PTR; + void (*sconsole_putc) (char) = 0; void (*sconsole_puts) (const char *) = 0; int (*sconsole_getc) (void) = 0; @@ -34,8 +36,6 @@ void (*sconsole_setbrg) (void) = 0; int serial_init (void) { - DECLARE_GLOBAL_DATA_PTR; - sconsole_buffer_t *sb = SCONSOLE_BUFFER; sb->pos = 0; @@ -104,8 +104,6 @@ int serial_tstc (void) void serial_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - if (sconsole_setbrg) { (*sconsole_setbrg) (); } else { diff --git a/board/pleb2/pleb2.c b/board/pleb2/pleb2.c index ce9245c..dc6fac4 100644 --- a/board/pleb2/pleb2.c +++ b/board/pleb2/pleb2.c @@ -28,8 +28,7 @@ #include <common.h> #include <asm-arm/mach-types.h> -/* ------------------------------------------------------------------------- */ - +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -37,8 +36,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -61,8 +58,6 @@ int board_late_init(void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; diff --git a/board/pm520/pm520.c b/board/pm520/pm520.c index d4cc5cb..65c5291 100644 --- a/board/pm520/pm520.c +++ b/board/pm520/pm520.c @@ -34,6 +34,8 @@ #include "mt48lc16m16a2-75.h" #endif +DECLARE_GLOBAL_DATA_PTR; + #ifndef CFG_RAMBOOT static void sdram_start (int hi_addr) { @@ -281,7 +283,6 @@ extern flash_info_t flash_info[]; /* info for FLASH chips */ int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; /* adjust flash start */ gd->bd->bi_flashstart = flash_info[0].start[0]; return (0); diff --git a/board/pn62/pn62.c b/board/pn62/pn62.c index 377aaa8..b2f348d 100644 --- a/board/pn62/pn62.c +++ b/board/pn62/pn62.c @@ -26,6 +26,7 @@ #include "pn62.h" +DECLARE_GLOBAL_DATA_PTR; static int get_serial_number (char *string, int size); static int get_mac_address (int id, u8 * mac, char *string, int size); @@ -122,8 +123,6 @@ void pci_init_board (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - char str[20]; u8 mac[6]; diff --git a/board/prodrive/p3p440/p3p440.c b/board/prodrive/p3p440/p3p440.c index d42a643..2f28e9d 100644 --- a/board/prodrive/p3p440/p3p440.c +++ b/board/prodrive/p3p440/p3p440.c @@ -29,6 +29,8 @@ #include "p3p440.h" +DECLARE_GLOBAL_DATA_PTR; + void set_led(int color) { switch (color) { @@ -141,8 +143,6 @@ int checkboard(void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - /* * Adjust flash start and offset to detected values */ @@ -206,8 +206,6 @@ int pci_pre_init(struct pci_controller *hose) #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller *hose) { - DECLARE_GLOBAL_DATA_PTR; - /*--------------------------------------------------------------------------+ * Disable everything *--------------------------------------------------------------------------*/ diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c index d5b993a..5765c55 100644 --- a/board/pxa255_idp/pxa_idp.c +++ b/board/pxa255_idp/pxa_idp.c @@ -33,8 +33,7 @@ #include <common.h> #include <command.h> -/* ------------------------------------------------------------------------- */ - +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -42,8 +41,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -86,8 +83,6 @@ int board_late_init(void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; diff --git a/board/quantum/quantum.c b/board/quantum/quantum.c index 2861bc3..afa6e11 100644 --- a/board/quantum/quantum.c +++ b/board/quantum/quantum.c @@ -170,14 +170,14 @@ static long int dram_size (long int mamr_value, long int *base, memctl->memc_mamr = mamr_value; for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { - addr = base + cnt; /* pointer arith! */ + addr = (volatile ulong *)(base + cnt); /* pointer arith! */ save[i++] = *addr; *addr = ~cnt; } /* write 0 to base address */ - addr = base; + addr = (volatile ulong *)base; save[i] = *addr; *addr = 0; @@ -194,7 +194,7 @@ static long int dram_size (long int mamr_value, long int *base, } for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { - addr = base + cnt; /* pointer arith! */ + addr = (volatile ulong *)(base + cnt); /* pointer arith! */ val = *addr; *addr = save[--i]; diff --git a/board/rbc823/kbd.c b/board/rbc823/kbd.c index c27929d..6d530f6 100644 --- a/board/rbc823/kbd.c +++ b/board/rbc823/kbd.c @@ -33,6 +33,8 @@ #include <devices.h> #include <lcd.h> +DECLARE_GLOBAL_DATA_PTR; + #define SMC_INDEX 0 #define PROFF_SMC PROFF_SMC1 #define CPM_CR_CH_SMC CPM_CR_CH_SMC1 @@ -46,8 +48,6 @@ void smc1_setbrg (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *im = (immap_t *)CFG_IMMR; volatile cpm8xx_t *cp = &(im->im_cpm); diff --git a/board/sacsng/clkinit.c b/board/sacsng/clkinit.c index ea4c65d..edb775d 100644 --- a/board/sacsng/clkinit.c +++ b/board/sacsng/clkinit.c @@ -30,6 +30,8 @@ #include "clkinit.h" +DECLARE_GLOBAL_DATA_PTR; + int Daq64xSampling = 0; @@ -257,7 +259,6 @@ void Daq_BRG_Set_ExtClk(uint brg, uint extc) uint Daq_BRG_Rate(uint brg) { - DECLARE_GLOBAL_DATA_PTR; volatile immap_t *immr = (immap_t *)CFG_IMMR; uint *brg_ptr; uint brg_cnt; @@ -295,7 +296,6 @@ uint Daq_Get_SampleRate(void) void Daq_Init_Clocks(int sample_rate, int sample_64x) { - DECLARE_GLOBAL_DATA_PTR; volatile ioport_t *iopa = ioport_addr((immap_t *)CFG_IMMR, 0 /* port A */); uint mclk_divisor; /* MCLK divisor */ int flag; /* Interrupt state */ diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c index 3530416..7816472 100644 --- a/board/sandburst/common/sb_common.c +++ b/board/sandburst/common/sb_common.c @@ -29,6 +29,8 @@ #include "ppc440gx_i2c.h" #include "sb_common.h" +DECLARE_GLOBAL_DATA_PTR; + long int fixed_sdram (void); /************************************************************************* @@ -203,7 +205,7 @@ long int initdram (int board_type) long dram_size = 0; #if defined(CONFIG_SPD_EEPROM) - dram_size = spd_sdram (0); + dram_size = spd_sdram (); #else dram_size = fixed_sdram (); #endif @@ -341,8 +343,6 @@ int pci_pre_init(struct pci_controller * hose ) #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller * hose ) { - DECLARE_GLOBAL_DATA_PTR; - /*--------------------------------------------------------------------------+ * Disable everything *--------------------------------------------------------------------------*/ diff --git a/board/sbc405/sbc405.c b/board/sbc405/sbc405.c index cad5873..0ae6d0b 100644 --- a/board/sbc405/sbc405.c +++ b/board/sbc405/sbc405.c @@ -98,7 +98,7 @@ int checkboard (void) long int initdram (int board_type) { - return spd_sdram (0); + return spd_sdram (); } /* ------------------------------------------------------------------------- */ diff --git a/board/sbc8240/sbc8240.c b/board/sbc8240/sbc8240.c index a6d3bab..8a52f67 100644 --- a/board/sbc8240/sbc8240.c +++ b/board/sbc8240/sbc8240.c @@ -29,12 +29,12 @@ #include <asm/processor.h> #include <pci.h> +DECLARE_GLOBAL_DATA_PTR; + #define BOARD_REV_REG 0xFE80002B int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; - char revision = *(volatile char *)(BOARD_REV_REG); char buf[32]; diff --git a/board/sc520_cdp/sc520_cdp.c b/board/sc520_cdp/sc520_cdp.c index cd52324..b6add59 100644 --- a/board/sc520_cdp/sc520_cdp.c +++ b/board/sc520_cdp/sc520_cdp.c @@ -30,6 +30,8 @@ #include <asm/ic/ali512x.h> #include <spi.h> +DECLARE_GLOBAL_DATA_PTR; + #undef SC520_CDP_DEBUG #ifdef SC520_CDP_DEBUG @@ -481,8 +483,6 @@ int pci_enable_legacy_video_ports(struct pci_controller *hose) int board_init(void) { - DECLARE_GLOBAL_DATA_PTR; - init_sc520(); bus_init(); irq_init(); diff --git a/board/sc520_spunk/sc520_spunk.c b/board/sc520_spunk/sc520_spunk.c index e7a7d51..ed226fd 100644 --- a/board/sc520_spunk/sc520_spunk.c +++ b/board/sc520_spunk/sc520_spunk.c @@ -29,9 +29,7 @@ #include <asm/pci.h> #include <asm/ic/sc520.h> - -/* ------------------------------------------------------------------------- */ - +DECLARE_GLOBAL_DATA_PTR; /* * Theory: @@ -483,8 +481,6 @@ int pci_enable_legacy_video_ports(struct pci_controller *hose) int board_init(void) { - DECLARE_GLOBAL_DATA_PTR; - init_sc520(); bus_init(); irq_init(); diff --git a/board/scb9328/scb9328.c b/board/scb9328/scb9328.c index 3ed8753..3f6831b 100644 --- a/board/scb9328/scb9328.c +++ b/board/scb9328/scb9328.c @@ -20,42 +20,41 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_SHOW_BOOT_PROGRESS # define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg) #else # define SHOW_BOOT_PROGRESS(arg) #endif -int board_init( void ){ - DECLARE_GLOBAL_DATA_PTR; - - gd->bd->bi_arch_number = MACH_TYPE_SCB9328; - gd->bd->bi_boot_params = 0x08000100; +int board_init (void) +{ + gd->bd->bi_arch_number = MACH_TYPE_SCB9328; + gd->bd->bi_boot_params = 0x08000100; - return 0; + return 0; } -int dram_init( void ){ - DECLARE_GLOBAL_DATA_PTR; - +int dram_init (void) +{ #if ( CONFIG_NR_DRAM_BANKS > 0 ) - gd->bd->bi_dram[0].start = SCB9328_SDRAM_1; - gd->bd->bi_dram[0].size = SCB9328_SDRAM_1_SIZE; + gd->bd->bi_dram[0].start = SCB9328_SDRAM_1; + gd->bd->bi_dram[0].size = SCB9328_SDRAM_1_SIZE; #endif #if ( CONFIG_NR_DRAM_BANKS > 1 ) - gd->bd->bi_dram[1].start = SCB9328_SDRAM_2; - gd->bd->bi_dram[1].size = SCB9328_SDRAM_2_SIZE; + gd->bd->bi_dram[1].start = SCB9328_SDRAM_2; + gd->bd->bi_dram[1].size = SCB9328_SDRAM_2_SIZE; #endif #if ( CONFIG_NR_DRAM_BANKS > 2 ) - gd->bd->bi_dram[2].start = SCB9328_SDRAM_3; - gd->bd->bi_dram[2].size = SCB9328_SDRAM_3_SIZE; + gd->bd->bi_dram[2].start = SCB9328_SDRAM_3; + gd->bd->bi_dram[2].size = SCB9328_SDRAM_3_SIZE; #endif #if ( CONFIG_NR_DRAM_BANKS > 3 ) - gd->bd->bi_dram[3].start = SCB9328_SDRAM_4; - gd->bd->bi_dram[3].size = SCB9328_SDRAM_4_SIZE; + gd->bd->bi_dram[3].start = SCB9328_SDRAM_4; + gd->bd->bi_dram[3].size = SCB9328_SDRAM_4_SIZE; #endif - - return 0; + return 0; } /** diff --git a/board/shannon/shannon.c b/board/shannon/shannon.c index 0d9f146..8cd1fc3 100644 --- a/board/shannon/shannon.c +++ b/board/shannon/shannon.c @@ -24,8 +24,7 @@ #include <common.h> -/* ------------------------------------------------------------------------- */ - +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -33,8 +32,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* but if we use InfernoLoader, we must do some inits here */ @@ -75,7 +72,6 @@ int dram_init (void) { #if defined(PHYS_SDRAM_1) || defined(PHYS_SDRAM_2) || \ defined(PHYS_SDRAM_3) || defined(PHYS_SDRAM_4) - DECLARE_GLOBAL_DATA_PTR; bd_t *bd = gd->bd; #endif diff --git a/board/siemens/SCM/scm.c b/board/siemens/SCM/scm.c index d20688d..8783aaf 100644 --- a/board/siemens/SCM/scm.c +++ b/board/siemens/SCM/scm.c @@ -27,6 +27,8 @@ #include "scm.h" +DECLARE_GLOBAL_DATA_PTR; + static void config_scoh_cs(void); extern int fpga_init(void); @@ -300,8 +302,6 @@ static long int try_init (volatile memctl8260_t * memctl, ulong sdmr, */ int power_on_reset (void) { - DECLARE_GLOBAL_DATA_PTR; - /* Test Reset Status Register */ return gd->reset_status & RSR_CSRS ? 0 : 1; } diff --git a/board/sixnet/sixnet.c b/board/sixnet/sixnet.c index a25dffd..a4cb4dc 100644 --- a/board/sixnet/sixnet.c +++ b/board/sixnet/sixnet.c @@ -38,6 +38,8 @@ extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; #endif +DECLARE_GLOBAL_DATA_PTR; + #define ORMASK(size) ((-size) & OR_AM_MSK) static long ram_size(ulong *, long); @@ -256,8 +258,6 @@ int board_postclk_init (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; - volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; char* s; diff --git a/board/smdk2400/smdk2400.c b/board/smdk2400/smdk2400.c index cb70218..4d1f1a6 100644 --- a/board/smdk2400/smdk2400.c +++ b/board/smdk2400/smdk2400.c @@ -28,7 +28,7 @@ #include <common.h> #include <s3c2400.h> -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; #ifdef CONFIG_MODEM_SUPPORT static int key_pressed(void); @@ -45,7 +45,6 @@ extern int do_mdm_init; /* defined in common/main.c */ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); @@ -94,8 +93,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/smdk2410/smdk2410.c b/board/smdk2410/smdk2410.c index 9623aef..802348d 100644 --- a/board/smdk2410/smdk2410.c +++ b/board/smdk2410/smdk2410.c @@ -28,7 +28,7 @@ #include <common.h> #include <s3c2410.h> -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; #define FCLK_SPEED 1 @@ -67,7 +67,6 @@ static inline void delay (unsigned long loops) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); @@ -117,8 +116,6 @@ int board_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/stamp/stamp.c b/board/stamp/stamp.c index 3fe0134..7e3af20 100644 --- a/board/stamp/stamp.c +++ b/board/stamp/stamp.c @@ -29,6 +29,8 @@ #include <asm/mem_init.h> #include "stamp.h" +DECLARE_GLOBAL_DATA_PTR; + #define STATUS_LED_OFF 0 #define STATUS_LED_ON 1 @@ -49,7 +51,6 @@ int checkboard (void) long int initdram (int board_type) { - DECLARE_GLOBAL_DATA_PTR; #ifdef DEBUG printf ("SDRAM attributes:\n"); printf (" tRCD:%d Cycles; tRP:%d Cycles; tRAS:%d Cycles; tWR:%d Cycles; " diff --git a/board/sx1/sx1.c b/board/sx1/sx1.c index e45f6ae..aaef76e 100644 --- a/board/sx1/sx1.c +++ b/board/sx1/sx1.c @@ -27,6 +27,8 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + static void flash__init (void); static void ether__init (void); @@ -43,8 +45,6 @@ static inline void delay (unsigned long loops) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* arch number of SX1 Board */ gd->bd->bi_arch_number = MACH_TYPE_SX1; @@ -116,8 +116,6 @@ static void ether__init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/tqm834x/tqm834x.c b/board/tqm834x/tqm834x.c index dada673..b5c12e3 100644 --- a/board/tqm834x/tqm834x.c +++ b/board/tqm834x/tqm834x.c @@ -32,6 +32,8 @@ #include <asm-ppc/mmu.h> #include <pci.h> +DECLARE_GLOBAL_DATA_PTR; + #define IOSYNC asm("eieio") #define ISYNC asm("isync") #define SYNC asm("sync") @@ -142,7 +144,6 @@ int checkboard (void) puts("Board: TQM834x\n"); #ifdef CONFIG_PCI - DECLARE_GLOBAL_DATA_PTR; volatile immap_t * immr; u32 w, f; diff --git a/board/tqm85xx/tqm85xx.c b/board/tqm85xx/tqm85xx.c index c03b60d..69b9101 100644 --- a/board/tqm85xx/tqm85xx.c +++ b/board/tqm85xx/tqm85xx.c @@ -36,6 +36,8 @@ #include <spd.h> #include <flash.h> +DECLARE_GLOBAL_DATA_PTR; + extern flash_info_t flash_info[]; /* FLASH chips info */ void local_bus_init (void); @@ -257,7 +259,6 @@ int checkboard (void) int misc_init_r (void) { - DECLARE_GLOBAL_DATA_PTR; volatile immap_t *immap = (immap_t *)CFG_IMMR; volatile ccsr_lbc_t *memctl = &immap->im_lbc; diff --git a/board/tqm8xx/flash.c b/board/tqm8xx/flash.c index 97bb5c3..ab57ee5 100644 --- a/board/tqm8xx/flash.c +++ b/board/tqm8xx/flash.c @@ -31,6 +31,8 @@ #include <asm/processor.h> +DECLARE_GLOBAL_DATA_PTR; + #if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) # ifndef CFG_OR_TIMING_FLASH_AT_50MHZ # define CFG_OR_TIMING_FLASH_AT_50MHZ (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ @@ -63,8 +65,6 @@ unsigned long flash_init (void) #ifdef CFG_OR_TIMING_FLASH_AT_50MHZ int scy, trlx, flash_or_timing, clk_diff; - DECLARE_GLOBAL_DATA_PTR; - scy = (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_SCY_MSK) >> 4; if (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_TRLX) { trlx = OR_TRLX; diff --git a/board/tqm8xx/tqm8xx.c b/board/tqm8xx/tqm8xx.c index 017bdf9..520bea8 100644 --- a/board/tqm8xx/tqm8xx.c +++ b/board/tqm8xx/tqm8xx.c @@ -31,12 +31,10 @@ #include <ps2mult.h> #endif -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; static long int dram_size (long int, long int *, long int); -/* ------------------------------------------------------------------------- */ - #define _NOT_USED_ 0xFFFFFFFF const uint sdram_table[] = @@ -104,8 +102,6 @@ const uint sdram_table[] = int checkboard (void) { - DECLARE_GLOBAL_DATA_PTR; - char *s = getenv ("serial#"); puts ("Board: "); diff --git a/board/trab/memory.c b/board/trab/memory.c index 9104413..4097892 100644 --- a/board/trab/memory.c +++ b/board/trab/memory.c @@ -454,10 +454,11 @@ int memory_post_tests (unsigned long start, unsigned long size) } #if 0 +DECLARE_GLOBAL_DATA_PTR; + int memory_post_test (int flags) { int ret = 0; - DECLARE_GLOBAL_DATA_PTR; bd_t *bd = gd->bd; unsigned long memsize = (bd->bi_memsize >= 256 << 20 ? 256 << 20 : bd->bi_memsize) - (1 << 20); diff --git a/board/trab/trab.c b/board/trab/trab.c index e8dfd2c..868a899 100644 --- a/board/trab/trab.c +++ b/board/trab/trab.c @@ -28,7 +28,7 @@ #include <s3c2400.h> #include <command.h> -/* ------------------------------------------------------------------------- */ +DECLARE_GLOBAL_DATA_PTR; #ifdef CFG_BRIGHTNESS static void spi_init(void); @@ -52,8 +52,6 @@ extern int do_mdm_init; /* defined in common/main.c */ #define KBD_MDELAY 5000 static void udelay_no_timer (int usec) { - DECLARE_GLOBAL_DATA_PTR; - int i; int delay = usec * 3; @@ -70,7 +68,6 @@ int board_init () #if defined(CONFIG_VFD) extern int vfd_init_clocks(void); #endif - DECLARE_GLOBAL_DATA_PTR; S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER(); S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO(); @@ -141,8 +138,6 @@ int board_init () int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; return 0; diff --git a/board/trab/vfd.c b/board/trab/vfd.c index f510ee5..cea8b0b 100644 --- a/board/trab/vfd.c +++ b/board/trab/vfd.c @@ -39,6 +39,8 @@ #include <devices.h> #include <s3c2400.h> +DECLARE_GLOBAL_DATA_PTR; + #ifdef CONFIG_VFD /************************************************************************/ @@ -86,7 +88,6 @@ unsigned char bit_vfd_table[112][18][2][4][2]; */ void init_grid_ctrl(void) { - DECLARE_GLOBAL_DATA_PTR; ulong adr, grid_cycle; unsigned int bit, display; unsigned char temp, bit_nr; @@ -172,7 +173,6 @@ void init_grid_ctrl(void) */ void create_vfd_table(void) { - DECLARE_GLOBAL_DATA_PTR; unsigned long vfd_table[112][18][2][4][2]; unsigned int x, y, color, display, entry, pixel; unsigned int x_abcdef = 0; @@ -280,7 +280,6 @@ void set_vfd_pixel(unsigned char x, unsigned char y, unsigned char color, unsigned char display, unsigned char value) { - DECLARE_GLOBAL_DATA_PTR; ulong adr; unsigned char bit_nr, temp; @@ -435,8 +434,6 @@ int drv_vfd_init(void) static int vfd_init_done = 0; int vfd_inv_data = 0; - DECLARE_GLOBAL_DATA_PTR; - if (vfd_init_done != 0) return (0); vfd_init_done = 1; diff --git a/board/versatile/versatile.c b/board/versatile/versatile.c index 0274027..9d1a25e 100644 --- a/board/versatile/versatile.c +++ b/board/versatile/versatile.c @@ -35,6 +35,8 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + void flash__init (void); void ether__init (void); void peripheral_power_enable (void); @@ -61,9 +63,6 @@ static inline void delay (unsigned long loops) int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - - /* * set clock frequency: * VERSATILE_REFCLK is 32KHz diff --git a/board/voiceblue/voiceblue.c b/board/voiceblue/voiceblue.c index 7a2d243..04093d1 100644 --- a/board/voiceblue/voiceblue.c +++ b/board/voiceblue/voiceblue.c @@ -21,10 +21,10 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + int board_init(void) { - DECLARE_GLOBAL_DATA_PTR; - *((volatile unsigned char *) VOICEBLUE_LED_REG) = 0xaa; /* arch number of VoiceBlue board */ @@ -39,8 +39,6 @@ int board_init(void) int dram_init(void) { - DECLARE_GLOBAL_DATA_PTR; - *((volatile unsigned short *) VOICEBLUE_LED_REG) = 0xff; /* Take the Ethernet controller out of reset and wait diff --git a/board/wepep250/wepep250.c b/board/wepep250/wepep250.c index 56cb855..fe4b6a9 100644 --- a/board/wepep250/wepep250.c +++ b/board/wepep250/wepep250.c @@ -23,45 +23,45 @@ #include <common.h> #include <asm/arch/pxa-regs.h> -int board_init( void ){ - DECLARE_GLOBAL_DATA_PTR; +DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_arch_number = MACH_TYPE_WEP_EP250; - gd->bd->bi_boot_params = 0xa0000000; +int board_init (void) +{ + gd->bd->bi_arch_number = MACH_TYPE_WEP_EP250; + gd->bd->bi_boot_params = 0xa0000000; /* * Setup GPIO stuff to get serial working */ #if defined( CONFIG_FFUART ) - GPDR1 = 0x80; - GAFR1_L = 0x8010; + GPDR1 = 0x80; + GAFR1_L = 0x8010; #elif defined( CONFIG_BTUART ) - GPDR1 = 0x800; - GAFR1_L = 0x900000; + GPDR1 = 0x800; + GAFR1_L = 0x900000; #endif - PSSR = 0x20; + PSSR = 0x20; - return 0; + return 0; } -int dram_init( void ){ - DECLARE_GLOBAL_DATA_PTR; - +int dram_init (void) +{ #if ( CONFIG_NR_DRAM_BANKS > 0 ) - gd->bd->bi_dram[0].start = WEP_SDRAM_1; - gd->bd->bi_dram[0].size = WEP_SDRAM_1_SIZE; + gd->bd->bi_dram[0].start = WEP_SDRAM_1; + gd->bd->bi_dram[0].size = WEP_SDRAM_1_SIZE; #endif #if ( CONFIG_NR_DRAM_BANKS > 1 ) - gd->bd->bi_dram[1].start = WEP_SDRAM_2; - gd->bd->bi_dram[1].size = WEP_SDRAM_2_SIZE; + gd->bd->bi_dram[1].start = WEP_SDRAM_2; + gd->bd->bi_dram[1].size = WEP_SDRAM_2_SIZE; #endif #if ( CONFIG_NR_DRAM_BANKS > 2 ) - gd->bd->bi_dram[2].start = WEP_SDRAM_3; - gd->bd->bi_dram[2].size = WEP_SDRAM_3_SIZE; + gd->bd->bi_dram[2].start = WEP_SDRAM_3; + gd->bd->bi_dram[2].size = WEP_SDRAM_3_SIZE; #endif #if ( CONFIG_NR_DRAM_BANKS > 3 ) - gd->bd->bi_dram[3].start = WEP_SDRAM_4; - gd->bd->bi_dram[3].size = WEP_SDRAM_4_SIZE; + gd->bd->bi_dram[3].start = WEP_SDRAM_4; + gd->bd->bi_dram[3].size = WEP_SDRAM_4_SIZE; #endif - return 0; + return 0; } diff --git a/board/xaeniax/xaeniax.c b/board/xaeniax/xaeniax.c index 26fb312..9baa457 100644 --- a/board/xaeniax/xaeniax.c +++ b/board/xaeniax/xaeniax.c @@ -30,8 +30,7 @@ #include <common.h> -/* ------------------------------------------------------------------------- */ - +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -39,8 +38,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -63,8 +60,6 @@ int board_late_init(void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; /* gd->bd->bi_dram[1].start = PHYS_SDRAM_2;*/ diff --git a/board/xilinx/ml300/serial.c b/board/xilinx/ml300/serial.c index 19bcc6f..c204b88 100644 --- a/board/xilinx/ml300/serial.c +++ b/board/xilinx/ml300/serial.c @@ -43,6 +43,8 @@ #include <configs/ml300.h> #include "xparameters.h" +DECLARE_GLOBAL_DATA_PTR; + #define USE_CHAN1 \ ((defined XPAR_UARTNS550_0_BASEADDR) && (defined CFG_INIT_CHAN1)) #define USE_CHAN2 \ @@ -64,7 +66,6 @@ int serial_init(void) { #if USE_CHAN1 - DECLARE_GLOBAL_DATA_PTR; int clock_divisor; clock_divisor = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 16 / gd->baudrate; @@ -103,7 +104,6 @@ void serial_setbrg(void) { #if USE_CHAN1 - DECLARE_GLOBAL_DATA_PTR; int clock_divisor; clock_divisor = XPAR_UARTNS550_0_CLOCK_FREQ_HZ / 16 / gd->baudrate; diff --git a/board/xm250/xm250.c b/board/xm250/xm250.c index ef5e9da..528d323 100644 --- a/board/xm250/xm250.c +++ b/board/xm250/xm250.c @@ -28,6 +28,8 @@ #include <asm/arch/pxa-regs.h> #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + /* ------------------------------------------------------------------------- */ /* local prototypes */ @@ -61,7 +63,6 @@ int board_init (void) /**********************************************************/ { - DECLARE_GLOBAL_DATA_PTR; /* arch number of MicroSys XM250 */ gd->bd->bi_arch_number = MACH_TYPE_XM250; @@ -76,8 +77,6 @@ int dram_init (void) /**********************************************************/ { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; diff --git a/board/xpedite1k/xpedite1k.c b/board/xpedite1k/xpedite1k.c index bb36c96..a569b53 100644 --- a/board/xpedite1k/xpedite1k.c +++ b/board/xpedite1k/xpedite1k.c @@ -26,6 +26,8 @@ #include <spd_sdram.h> #include <i2c.h> +DECLARE_GLOBAL_DATA_PTR; + #define BOOT_SMALL_FLASH 32 /* 00100000 */ #define FLASH_ONBD_N 2 /* 00000010 */ #define FLASH_SRAM_SEL 1 /* 00000001 */ @@ -107,7 +109,7 @@ long int initdram (int board_type) long dram_size = 0; #if defined(CONFIG_SPD_EEPROM) - dram_size = spd_sdram (0); + dram_size = spd_sdram (); #else dram_size = fixed_sdram (); #endif @@ -238,8 +240,6 @@ int pci_pre_init(struct pci_controller * hose ) #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) void pci_target_init(struct pci_controller * hose ) { - DECLARE_GLOBAL_DATA_PTR; - /*--------------------------------------------------------------------------+ * Disable everything *--------------------------------------------------------------------------*/ diff --git a/board/xsengine/xsengine.c b/board/xsengine/xsengine.c index a9919db..23d56c4 100644 --- a/board/xsengine/xsengine.c +++ b/board/xsengine/xsengine.c @@ -27,14 +27,14 @@ #include <common.h> +DECLARE_GLOBAL_DATA_PTR; + /* * Miscelaneous platform dependent initialisations */ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -56,8 +56,6 @@ int board_post_init (void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; diff --git a/board/zylonite/zylonite.c b/board/zylonite/zylonite.c index e618ab9..5829170 100644 --- a/board/zylonite/zylonite.c +++ b/board/zylonite/zylonite.c @@ -27,8 +27,7 @@ #include <common.h> -/* ------------------------------------------------------------------------- */ - +DECLARE_GLOBAL_DATA_PTR; /* * Miscelaneous platform dependent initialisations @@ -36,8 +35,6 @@ int board_init (void) { - DECLARE_GLOBAL_DATA_PTR; - /* memory and cpu-speed are setup before relocation */ /* so we do _nothing_ here */ @@ -60,8 +57,6 @@ int board_late_init(void) int dram_init (void) { - DECLARE_GLOBAL_DATA_PTR; - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; gd->bd->bi_dram[1].start = PHYS_SDRAM_2; |