diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/samsung/origen/Makefile | 11 | ||||
| -rw-r--r-- | board/samsung/origen/lowlevel_init.S | 357 | ||||
| -rw-r--r-- | board/samsung/origen/mem_setup.S | 421 | ||||
| -rw-r--r-- | board/samsung/origen/mmc_boot.c | 58 | ||||
| -rw-r--r-- | board/samsung/origen/origen_setup.h | 607 | ||||
| -rw-r--r-- | board/samsung/smdk5250/Makefile | 14 | ||||
| -rw-r--r-- | board/samsung/smdk5250/clock_init.c | 684 | ||||
| -rw-r--r-- | board/samsung/smdk5250/clock_init.h | 154 | ||||
| -rw-r--r-- | board/samsung/smdk5250/dmc_common.c | 199 | ||||
| -rw-r--r-- | board/samsung/smdk5250/dmc_init_ddr3.c | 228 | ||||
| -rw-r--r-- | board/samsung/smdk5250/setup.h | 569 | ||||
| -rw-r--r-- | board/samsung/smdk5250/spl_boot.c | 151 | ||||
| -rw-r--r-- | board/samsung/smdkv310/Makefile | 10 | ||||
| -rw-r--r-- | board/samsung/smdkv310/lowlevel_init.S | 414 | ||||
| -rw-r--r-- | board/samsung/smdkv310/mem_setup.S | 365 | ||||
| -rw-r--r-- | board/samsung/smdkv310/mmc_boot.c | 60 |
16 files changed, 7 insertions, 4295 deletions
diff --git a/board/samsung/origen/Makefile b/board/samsung/origen/Makefile index 3a885a5..63c8b46 100644 --- a/board/samsung/origen/Makefile +++ b/board/samsung/origen/Makefile @@ -24,19 +24,12 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -SOBJS := mem_setup.o -SOBJS += lowlevel_init.o - ifndef CONFIG_SPL_BUILD COBJS += origen.o endif -ifdef CONFIG_SPL_BUILD -COBJS += mmc_boot.o -endif - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) ALL +=$(obj).depend $(LIB) diff --git a/board/samsung/origen/lowlevel_init.S b/board/samsung/origen/lowlevel_init.S deleted file mode 100644 index be9d418..0000000 --- a/board/samsung/origen/lowlevel_init.S +++ /dev/null @@ -1,357 +0,0 @@ -/* - * Lowlevel setup for ORIGEN board based on EXYNOS4210 - * - * Copyright (C) 2011 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> -#include <asm/arch/cpu.h> -#include "origen_setup.h" -/* - * Register usages: - * - * r5 has zero always - * r7 has GPIO part1 base 0x11400000 - * r6 has GPIO part2 base 0x11000000 - */ - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - - .globl lowlevel_init -lowlevel_init: - push {lr} - - /* r5 has always zero */ - mov r5, #0 - ldr r7, =EXYNOS4_GPIO_PART1_BASE - ldr r6, =EXYNOS4_GPIO_PART2_BASE - - /* check reset status */ - ldr r0, =(EXYNOS4_POWER_BASE + INFORM1_OFFSET) - ldr r1, [r0] - - /* AFTR wakeup reset */ - ldr r2, =S5P_CHECK_DIDLE - cmp r1, r2 - beq exit_wakeup - - /* LPA wakeup reset */ - ldr r2, =S5P_CHECK_LPA - cmp r1, r2 - beq exit_wakeup - - /* Sleep wakeup reset */ - ldr r2, =S5P_CHECK_SLEEP - cmp r1, r2 - beq wakeup_reset - - /* - * If U-boot is already running in ram, no need to relocate U-Boot. - * Memory controller must be configured before relocating U-Boot - * in ram. - */ - ldr r0, =0x0ffffff /* r0 <- Mask Bits*/ - bic r1, pc, r0 /* pc <- current addr of code */ - /* r1 <- unmasked bits of pc */ - ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */ - bic r2, r2, r0 /* r2 <- unmasked bits of r2*/ - cmp r1, r2 /* compare r1, r2 */ - beq 1f /* r0 == r1 then skip sdram init */ - - /* init system clock */ - bl system_clock_init - - /* Memory initialize */ - bl mem_ctrl_asm_init - -1: - /* for UART */ - bl uart_asm_init - bl arch_cpu_init - bl tzpc_init - pop {pc} - -wakeup_reset: - bl system_clock_init - bl mem_ctrl_asm_init - bl arch_cpu_init - bl tzpc_init - -exit_wakeup: - /* Load return address and jump to kernel */ - ldr r0, =(EXYNOS4_POWER_BASE + INFORM0_OFFSET) - - /* r1 = physical address of exynos4210_cpu_resume function */ - ldr r1, [r0] - - /* Jump to kernel*/ - mov pc, r1 - nop - nop - -/* - * system_clock_init: Initialize core clock and bus clock. - * void system_clock_init(void) - */ -system_clock_init: - push {lr} - ldr r0, =EXYNOS4_CLOCK_BASE - - /* APLL(1), MPLL(1), CORE(0), HPM(0) */ - ldr r1, =CLK_SRC_CPU_VAL - ldr r2, =CLK_SRC_CPU_OFFSET - str r1, [r0, r2] - - /* wait ?us */ - mov r1, #0x10000 -2: subs r1, r1, #1 - bne 2b - - ldr r1, =CLK_SRC_TOP0_VAL - ldr r2, =CLK_SRC_TOP0_OFFSET - str r1, [r0, r2] - - ldr r1, =CLK_SRC_TOP1_VAL - ldr r2, =CLK_SRC_TOP1_OFFSET - str r1, [r0, r2] - - /* DMC */ - ldr r1, =CLK_SRC_DMC_VAL - ldr r2, =CLK_SRC_DMC_OFFSET - str r1, [r0, r2] - - /*CLK_SRC_LEFTBUS */ - ldr r1, =CLK_SRC_LEFTBUS_VAL - ldr r2, =CLK_SRC_LEFTBUS_OFFSET - str r1, [r0, r2] - - /*CLK_SRC_RIGHTBUS */ - ldr r1, =CLK_SRC_RIGHTBUS_VAL - ldr r2, =CLK_SRC_RIGHTBUS_OFFSET - str r1, [r0, r2] - - /* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */ - ldr r1, =CLK_SRC_FSYS_VAL - ldr r2, =CLK_SRC_FSYS_OFFSET - str r1, [r0, r2] - - /* UART[0:4] */ - ldr r1, =CLK_SRC_PERIL0_VAL - ldr r2, =CLK_SRC_PERIL0_OFFSET - str r1, [r0, r2] - - /* CAM , FIMC 0-3 */ - ldr r1, =CLK_SRC_CAM_VAL - ldr r2, =CLK_SRC_CAM_OFFSET - str r1, [r0, r2] - - /* MFC */ - ldr r1, =CLK_SRC_MFC_VAL - ldr r2, =CLK_SRC_MFC_OFFSET - str r1, [r0, r2] - - /* G3D */ - ldr r1, =CLK_SRC_G3D_VAL - ldr r2, =CLK_SRC_G3D_OFFSET - str r1, [r0, r2] - - /* LCD0 */ - ldr r1, =CLK_SRC_LCD0_VAL - ldr r2, =CLK_SRC_LCD0_OFFSET - str r1, [r0, r2] - - /* wait ?us */ - mov r1, #0x10000 -3: subs r1, r1, #1 - bne 3b - - /* CLK_DIV_CPU0 */ - ldr r1, =CLK_DIV_CPU0_VAL - ldr r2, =CLK_DIV_CPU0_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_CPU1 */ - ldr r1, =CLK_DIV_CPU1_VAL - ldr r2, =CLK_DIV_CPU1_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_DMC0 */ - ldr r1, =CLK_DIV_DMC0_VAL - ldr r2, =CLK_DIV_DMC0_OFFSET - str r1, [r0, r2] - - /*CLK_DIV_DMC1 */ - ldr r1, =CLK_DIV_DMC1_VAL - ldr r2, =CLK_DIV_DMC1_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_LEFTBUS */ - ldr r1, =CLK_DIV_LEFTBUS_VAL - ldr r2, =CLK_DIV_LEFTBUS_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_RIGHTBUS */ - ldr r1, =CLK_DIV_RIGHTBUS_VAL - ldr r2, =CLK_DIV_RIGHTBUS_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_TOP */ - ldr r1, =CLK_DIV_TOP_VAL - ldr r2, =CLK_DIV_TOP_OFFSET - str r1, [r0, r2] - - /* MMC[0:1] */ - ldr r1, =CLK_DIV_FSYS1_VAL /* 800(MPLL) / (15 + 1) */ - ldr r2, =CLK_DIV_FSYS1_OFFSET - str r1, [r0, r2] - - /* MMC[2:3] */ - ldr r1, =CLK_DIV_FSYS2_VAL /* 800(MPLL) / (15 + 1) */ - ldr r2, =CLK_DIV_FSYS2_OFFSET - str r1, [r0, r2] - - /* MMC4 */ - ldr r1, =CLK_DIV_FSYS3_VAL /* 800(MPLL) / (15 + 1) */ - ldr r2, =CLK_DIV_FSYS3_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_PERIL0: UART Clock Divisors */ - ldr r1, =CLK_DIV_PERIL0_VAL - ldr r2, =CLK_DIV_PERIL0_OFFSET - str r1, [r0, r2] - - /* CAM, FIMC 0-3: CAM Clock Divisors */ - ldr r1, =CLK_DIV_CAM_VAL - ldr r2, =CLK_DIV_CAM_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_MFC: MFC Clock Divisors */ - ldr r1, =CLK_DIV_MFC_VAL - ldr r2, =CLK_DIV_MFC_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_G3D: G3D Clock Divisors */ - ldr r1, =CLK_DIV_G3D_VAL - ldr r2, =CLK_DIV_G3D_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_LCD0: LCD0 Clock Divisors */ - ldr r1, =CLK_DIV_LCD0_VAL - ldr r2, =CLK_DIV_LCD0_OFFSET - str r1, [r0, r2] - - /* Set PLL locktime */ - ldr r1, =PLL_LOCKTIME - ldr r2, =APLL_LOCK_OFFSET - str r1, [r0, r2] - - ldr r1, =PLL_LOCKTIME - ldr r2, =MPLL_LOCK_OFFSET - str r1, [r0, r2] - - ldr r1, =PLL_LOCKTIME - ldr r2, =EPLL_LOCK_OFFSET - str r1, [r0, r2] - - ldr r1, =PLL_LOCKTIME - ldr r2, =VPLL_LOCK_OFFSET - str r1, [r0, r2] - - /* APLL_CON1 */ - ldr r1, =APLL_CON1_VAL - ldr r2, =APLL_CON1_OFFSET - str r1, [r0, r2] - - /* APLL_CON0 */ - ldr r1, =APLL_CON0_VAL - ldr r2, =APLL_CON0_OFFSET - str r1, [r0, r2] - - /* MPLL_CON1 */ - ldr r1, =MPLL_CON1_VAL - ldr r2, =MPLL_CON1_OFFSET - str r1, [r0, r2] - - /* MPLL_CON0 */ - ldr r1, =MPLL_CON0_VAL - ldr r2, =MPLL_CON0_OFFSET - str r1, [r0, r2] - - /* EPLL */ - ldr r1, =EPLL_CON1_VAL - ldr r2, =EPLL_CON1_OFFSET - str r1, [r0, r2] - - /* EPLL_CON0 */ - ldr r1, =EPLL_CON0_VAL - ldr r2, =EPLL_CON0_OFFSET - str r1, [r0, r2] - - /* VPLL_CON1 */ - ldr r1, =VPLL_CON1_VAL - ldr r2, =VPLL_CON1_OFFSET - str r1, [r0, r2] - - /* VPLL_CON0 */ - ldr r1, =VPLL_CON0_VAL - ldr r2, =VPLL_CON0_OFFSET - str r1, [r0, r2] - - /* wait ?us */ - mov r1, #0x30000 -4: subs r1, r1, #1 - bne 4b - - pop {pc} -/* - * uart_asm_init: Initialize UART in asm mode, 115200bps fixed. - * void uart_asm_init(void) - */ - .globl uart_asm_init -uart_asm_init: - - /* setup UART0-UART3 GPIOs (part1) */ - mov r0, r7 - ldr r1, =EXYNOS4_GPIO_A0_CON_VAL - str r1, [r0, #EXYNOS4_GPIO_A0_CON_OFFSET] - ldr r1, =EXYNOS4_GPIO_A1_CON_VAL - str r1, [r0, #EXYNOS4_GPIO_A1_CON_OFFSET] - - ldr r0, =EXYNOS4_UART_BASE - add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET - - ldr r1, =ULCON_VAL - str r1, [r0, #ULCON_OFFSET] - ldr r1, =UCON_VAL - str r1, [r0, #UCON_OFFSET] - ldr r1, =UFCON_VAL - str r1, [r0, #UFCON_OFFSET] - ldr r1, =UBRDIV_VAL - str r1, [r0, #UBRDIV_OFFSET] - ldr r1, =UFRACVAL_VAL - str r1, [r0, #UFRACVAL_OFFSET] - mov pc, lr - nop - nop - nop - diff --git a/board/samsung/origen/mem_setup.S b/board/samsung/origen/mem_setup.S deleted file mode 100644 index b49b193..0000000 --- a/board/samsung/origen/mem_setup.S +++ /dev/null @@ -1,421 +0,0 @@ -/* - * Memory setup for ORIGEN board based on EXYNOS4210 - * - * Copyright (C) 2011 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include "origen_setup.h" -#define SET_MIU - - .globl mem_ctrl_asm_init -mem_ctrl_asm_init: - /* - * Async bridge configuration at CPU_core: - * 1: half_sync - * 0: full_sync - */ - ldr r0, =ASYNC_CONFIG - mov r1, #1 - str r1, [r0] - -#ifdef SET_MIU - ldr r0, =EXYNOS4_MIU_BASE - /* Interleave: 2Bit, Interleave_bit1: 0x21, Interleave_bit2: 0x7 */ - ldr r1, =0x20001507 - str r1, [r0, #APB_SFR_INTERLEAVE_CONF_OFFSET] - - /* Update MIU Configuration */ - ldr r1, =0x00000001 - str r1, [r0, #APB_SFR_ARBRITATION_CONF_OFFSET] -#endif - /* DREX0 */ - ldr r0, =EXYNOS4_DMC0_BASE - - /* - * DLL Parameter Setting: - * Termination: Enable R/W - * Phase Delay for DQS Cleaning: 180' Shift - */ - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* - * ZQ Calibration - * Termination: Disable - * Auto Calibration Start: Enable - */ - ldr r1, =0xE3855703 - str r1, [r0, #DMC_PHYZQCONTROL] - - /* Wait ?us*/ - mov r2, #0x100000 -1: subs r2, r2, #1 - bne 1b - - /* - * Update DLL Information: - * Force DLL Resyncronization - */ - ldr r1, =0xe000008e - str r1, [r0, #DMC_PHYCONTROL1] - - /* Reset Force DLL Resyncronization */ - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* Enable Differential DQS, DLL Off*/ - ldr r1, =0x71101008 - str r1, [r0, #DMC_PHYCONTROL0] - - /* Activate PHY DLL: DLL On */ - ldr r1, =0x7110100A - str r1, [r0, #DMC_PHYCONTROL0] - - /* Set DLL Parameters */ - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* DLL Start */ - ldr r1, =0x7110100B - str r1, [r0, #DMC_PHYCONTROL0] - - ldr r1, =0x00000000 - str r1, [r0, #DMC_PHYCONTROL2] - - /* Set Clock Ratio of Bus clock to Memory Clock */ - ldr r1, =0x0FFF301a - str r1, [r0, #DMC_CONCONTROL] - - /* - * Memor Burst length: 8 - * Number of chips: 2 - * Memory Bus width: 32 bit - * Memory Type: DDR3 - * Additional Latancy for PLL: 1 Cycle - */ - ldr r1, =0x00312640 - str r1, [r0, #DMC_MEMCONTROL] - - /* - * Memory Configuration Chip 0 - * Address Mapping: Interleaved - * Number of Column address Bits: 10 bits - * Number of Rows Address Bits: 14 - * Number of Banks: 8 - */ - ldr r1, =0x20e01323 - str r1, [r0, #DMC_MEMCONFIG0] - - /* - * Memory Configuration Chip 1 - * Address Mapping: Interleaved - * Number of Column address Bits: 10 bits - * Number of Rows Address Bits: 14 - * Number of Banks: 8 - */ - ldr r1, =0x40e01323 - str r1, [r0, #DMC_MEMCONFIG1] - - /* Config Precharge Policy */ - ldr r1, =0xff000000 - str r1, [r0, #DMC_PRECHCONFIG] - - /* - * TimingAref, TimingRow, TimingData, TimingPower Setting: - * Values as per Memory AC Parameters - */ - ldr r1, =0x000000BB - str r1, [r0, #DMC_TIMINGAREF] - ldr r1, =0x4046654f - str r1, [r0, #DMC_TIMINGROW] - ldr r1, =0x46400506 - str r1, [r0, #DMC_TIMINGDATA] - ldr r1, =0x52000A3C - str r1, [r0, #DMC_TIMINGPOWER] - - /* Chip0: NOP Command: Assert and Hold CKE to high level */ - ldr r1, =0x07000000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -2: subs r2, r2, #1 - bne 2b - - /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ - ldr r1, =0x00020000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00030000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00010002 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00000328 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -3: subs r2, r2, #1 - bne 3b - - /* Chip0: ZQINIT */ - ldr r1, =0x0a000000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -4: subs r2, r2, #1 - bne 4b - - /* Chip1: NOP Command: Assert and Hold CKE to high level */ - ldr r1, =0x07100000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -5: subs r2, r2, #1 - bne 5b - - /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ - ldr r1, =0x00120000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00130000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00110002 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00100328 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -6: subs r2, r2, #1 - bne 6b - - /* Chip1: ZQINIT */ - ldr r1, =0x0a100000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -7: subs r2, r2, #1 - bne 7b - - ldr r1, =0xe000008e - str r1, [r0, #DMC_PHYCONTROL1] - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* Wait ?us*/ - mov r2, #0x100000 -8: subs r2, r2, #1 - bne 8b - - /* DREX1 */ - ldr r0, =EXYNOS4_DMC1_BASE @0x10410000 - - /* - * DLL Parameter Setting: - * Termination: Enable R/W - * Phase Delay for DQS Cleaning: 180' Shift - */ - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* - * ZQ Calibration: - * Termination: Disable - * Auto Calibration Start: Enable - */ - ldr r1, =0xE3855703 - str r1, [r0, #DMC_PHYZQCONTROL] - - /* Wait ?us*/ - mov r2, #0x100000 -1: subs r2, r2, #1 - bne 1b - - /* - * Update DLL Information: - * Force DLL Resyncronization - */ - ldr r1, =0xe000008e - str r1, [r0, #DMC_PHYCONTROL1] - - /* Reset Force DLL Resyncronization */ - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* Enable Differential DQS, DLL Off*/ - ldr r1, =0x71101008 - str r1, [r0, #DMC_PHYCONTROL0] - - /* Activate PHY DLL: DLL On */ - ldr r1, =0x7110100A - str r1, [r0, #DMC_PHYCONTROL0] - - /* Set DLL Parameters */ - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* DLL Start */ - ldr r1, =0x7110100B - str r1, [r0, #DMC_PHYCONTROL0] - - ldr r1, =0x00000000 - str r1, [r0, #DMC_PHYCONTROL2] - - /* Set Clock Ratio of Bus clock to Memory Clock */ - ldr r1, =0x0FFF301a - str r1, [r0, #DMC_CONCONTROL] - - /* - * Memor Burst length: 8 - * Number of chips: 2 - * Memory Bus width: 32 bit - * Memory Type: DDR3 - * Additional Latancy for PLL: 1 Cycle - */ - ldr r1, =0x00312640 - str r1, [r0, #DMC_MEMCONTROL] - - /* - * Memory Configuration Chip 0 - * Address Mapping: Interleaved - * Number of Column address Bits: 10 bits - * Number of Rows Address Bits: 14 - * Number of Banks: 8 - */ - ldr r1, =0x20e01323 - str r1, [r0, #DMC_MEMCONFIG0] - - /* - * Memory Configuration Chip 1 - * Address Mapping: Interleaved - * Number of Column address Bits: 10 bits - * Number of Rows Address Bits: 14 - * Number of Banks: 8 - */ - ldr r1, =0x40e01323 - str r1, [r0, #DMC_MEMCONFIG1] - - /* Config Precharge Policy */ - ldr r1, =0xff000000 - str r1, [r0, #DMC_PRECHCONFIG] - - /* - * TimingAref, TimingRow, TimingData, TimingPower Setting: - * Values as per Memory AC Parameters - */ - ldr r1, =0x000000BB - str r1, [r0, #DMC_TIMINGAREF] - ldr r1, =0x4046654f - str r1, [r0, #DMC_TIMINGROW] - ldr r1, =0x46400506 - str r1, [r0, #DMC_TIMINGDATA] - ldr r1, =0x52000A3C - str r1, [r0, #DMC_TIMINGPOWER] - - /* Chip0: NOP Command: Assert and Hold CKE to high level */ - ldr r1, =0x07000000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -2: subs r2, r2, #1 - bne 2b - - /* Chip0: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ - ldr r1, =0x00020000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00030000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00010002 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00000328 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -3: subs r2, r2, #1 - bne 3b - - /* Chip 0: ZQINIT */ - ldr r1, =0x0a000000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -4: subs r2, r2, #1 - bne 4b - - /* Chip1: NOP Command: Assert and Hold CKE to high level */ - ldr r1, =0x07100000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -5: subs r2, r2, #1 - bne 5b - - /* Chip1: EMRS2, EMRS3, EMRS, MRS Commands Using Direct Command */ - ldr r1, =0x00120000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00130000 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00110002 - str r1, [r0, #DMC_DIRECTCMD] - ldr r1, =0x00100328 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -6: subs r2, r2, #1 - bne 6b - - /* Chip1: ZQINIT */ - ldr r1, =0x0a100000 - str r1, [r0, #DMC_DIRECTCMD] - - /* Wait ?us*/ - mov r2, #0x100000 -7: subs r2, r2, #1 - bne 7b - - ldr r1, =0xe000008e - str r1, [r0, #DMC_PHYCONTROL1] - ldr r1, =0xe0000086 - str r1, [r0, #DMC_PHYCONTROL1] - - /* Wait ?us*/ - mov r2, #0x100000 -8: subs r2, r2, #1 - bne 8b - - /* turn on DREX0, DREX1 */ - ldr r0, =EXYNOS4_DMC0_BASE - ldr r1, =0x0FFF303a - str r1, [r0, #DMC_CONCONTROL] - - ldr r0, =EXYNOS4_DMC1_BASE - ldr r1, =0x0FFF303a - str r1, [r0, #DMC_CONCONTROL] - - mov pc, lr diff --git a/board/samsung/origen/mmc_boot.c b/board/samsung/origen/mmc_boot.c deleted file mode 100644 index 072f161..0000000 --- a/board/samsung/origen/mmc_boot.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include<common.h> -#include<config.h> - -/* -* Copy U-boot from mmc to RAM: -* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains -* Pointer to API (Data transfer from mmc to ram) -*/ -void copy_uboot_to_ram(void) -{ - u32 (*copy_bl2)(u32, u32, u32) = (void *) *(u32 *)COPY_BL2_FNPTR_ADDR; - - copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE); -} - -void board_init_f(unsigned long bootflag) -{ - __attribute__((noreturn)) void (*uboot)(void); - copy_uboot_to_ram(); - - /* Jump to U-Boot image */ - uboot = (void *)CONFIG_SYS_TEXT_BASE; - (*uboot)(); - /* Never returns Here */ -} - -/* Place Holders */ -void board_init_r(gd_t *id, ulong dest_addr) -{ - /* Function attribute is no-return */ - /* This Function never executes */ - while (1) - ; -} - -void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {} diff --git a/board/samsung/origen/origen_setup.h b/board/samsung/origen/origen_setup.h deleted file mode 100644 index 926a4cc..0000000 --- a/board/samsung/origen/origen_setup.h +++ /dev/null @@ -1,607 +0,0 @@ -/* - * Machine Specific Values for ORIGEN board based on S5PV310 - * - * Copyright (C) 2011 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _ORIGEN_SETUP_H -#define _ORIGEN_SETUP_H - -#include <config.h> -#include <version.h> -#include <asm/arch/cpu.h> - -/* Offsets of clock registers (sources and dividers) */ -#define CLK_SRC_CPU_OFFSET 0x14200 -#define CLK_DIV_CPU0_OFFSET 0x14500 -#define CLK_DIV_CPU1_OFFSET 0x14504 - -#define CLK_SRC_DMC_OFFSET 0x10200 -#define CLK_DIV_DMC0_OFFSET 0x10500 -#define CLK_DIV_DMC1_OFFSET 0x10504 - -#define CLK_SRC_TOP0_OFFSET 0xC210 -#define CLK_SRC_TOP1_OFFSET 0xC214 -#define CLK_DIV_TOP_OFFSET 0xC510 - -#define CLK_SRC_LEFTBUS_OFFSET 0x4200 -#define CLK_DIV_LEFTBUS_OFFSET 0x4500 - -#define CLK_SRC_RIGHTBUS_OFFSET 0x8200 -#define CLK_DIV_RIGHTBUS_OFFSET 0x8500 - -#define CLK_SRC_FSYS_OFFSET 0xC240 -#define CLK_DIV_FSYS1_OFFSET 0xC544 -#define CLK_DIV_FSYS2_OFFSET 0xC548 -#define CLK_DIV_FSYS3_OFFSET 0xC54C - -#define CLK_SRC_CAM_OFFSET 0xC220 -#define CLK_SRC_TV_OFFSET 0xC224 -#define CLK_SRC_MFC_OFFSET 0xC228 -#define CLK_SRC_G3D_OFFSET 0xC22C -#define CLK_SRC_LCD0_OFFSET 0xC234 -#define CLK_SRC_PERIL0_OFFSET 0xC250 - -#define CLK_DIV_CAM_OFFSET 0xC520 -#define CLK_DIV_TV_OFFSET 0xC524 -#define CLK_DIV_MFC_OFFSET 0xC528 -#define CLK_DIV_G3D_OFFSET 0xC52C -#define CLK_DIV_LCD0_OFFSET 0xC534 -#define CLK_DIV_PERIL0_OFFSET 0xC550 - -#define CLK_SRC_LCD0_OFFSET 0xC234 - -#define APLL_LOCK_OFFSET 0x14000 -#define MPLL_LOCK_OFFSET 0x14008 -#define APLL_CON0_OFFSET 0x14100 -#define APLL_CON1_OFFSET 0x14104 -#define MPLL_CON0_OFFSET 0x14108 -#define MPLL_CON1_OFFSET 0x1410C - -#define EPLL_LOCK_OFFSET 0xC010 -#define VPLL_LOCK_OFFSET 0xC020 -#define EPLL_CON0_OFFSET 0xC110 -#define EPLL_CON1_OFFSET 0xC114 -#define VPLL_CON0_OFFSET 0xC120 -#define VPLL_CON1_OFFSET 0xC124 - -/* DMC: DRAM Controllor Register offsets */ -#define DMC_CONCONTROL 0x00 -#define DMC_MEMCONTROL 0x04 -#define DMC_MEMCONFIG0 0x08 -#define DMC_MEMCONFIG1 0x0C -#define DMC_DIRECTCMD 0x10 -#define DMC_PRECHCONFIG 0x14 -#define DMC_PHYCONTROL0 0x18 -#define DMC_PHYCONTROL1 0x1C -#define DMC_PHYCONTROL2 0x20 -#define DMC_TIMINGAREF 0x30 -#define DMC_TIMINGROW 0x34 -#define DMC_TIMINGDATA 0x38 -#define DMC_TIMINGPOWER 0x3C -#define DMC_PHYZQCONTROL 0x44 - -/* Bus Configuration Register Address */ -#define ASYNC_CONFIG 0x10010350 - -/* MIU Config Register Offsets*/ -#define APB_SFR_INTERLEAVE_CONF_OFFSET 0x400 -#define APB_SFR_ARBRITATION_CONF_OFFSET 0xC00 - -/* Offset for inform registers */ -#define INFORM0_OFFSET 0x800 -#define INFORM1_OFFSET 0x804 - -/* GPIO Offsets for UART: GPIO Contol Register */ -#define EXYNOS4_GPIO_A0_CON_OFFSET 0x00 -#define EXYNOS4_GPIO_A1_CON_OFFSET 0x20 - -/* UART Register offsets */ -#define ULCON_OFFSET 0x00 -#define UCON_OFFSET 0x04 -#define UFCON_OFFSET 0x08 -#define UBRDIV_OFFSET 0x28 -#define UFRACVAL_OFFSET 0x2C - -/* CLK_SRC_CPU */ -#define MUX_HPM_SEL_MOUTAPLL 0x0 -#define MUX_HPM_SEL_SCLKMPLL 0x1 -#define MUX_CORE_SEL_MOUTAPLL 0x0 -#define MUX_CORE_SEL_SCLKMPLL 0x1 -#define MUX_MPLL_SEL_FILPLL 0x0 -#define MUX_MPLL_SEL_MOUTMPLLFOUT 0x1 -#define MUX_APLL_SEL_FILPLL 0x0 -#define MUX_APLL_SEL_MOUTMPLLFOUT 0x1 -#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL_MOUTAPLL << 20) \ - | (MUX_CORE_SEL_MOUTAPLL << 16) \ - | (MUX_MPLL_SEL_MOUTMPLLFOUT << 8)\ - | (MUX_APLL_SEL_MOUTMPLLFOUT << 0)) - -/* CLK_DIV_CPU0 */ -#define APLL_RATIO 0x0 -#define PCLK_DBG_RATIO 0x1 -#define ATB_RATIO 0x3 -#define PERIPH_RATIO 0x3 -#define COREM1_RATIO 0x7 -#define COREM0_RATIO 0x3 -#define CORE_RATIO 0x0 -#define CLK_DIV_CPU0_VAL ((APLL_RATIO << 24) \ - | (PCLK_DBG_RATIO << 20) \ - | (ATB_RATIO << 16) \ - | (PERIPH_RATIO << 12) \ - | (COREM1_RATIO << 8) \ - | (COREM0_RATIO << 4) \ - | (CORE_RATIO << 0)) - -/* CLK_DIV_CPU1 */ -#define HPM_RATIO 0x0 -#define COPY_RATIO 0x3 -#define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) | (COPY_RATIO)) - -/* CLK_SRC_DMC */ -#define MUX_PWI_SEL_XXTI 0x0 -#define MUX_PWI_SEL_XUSBXTI 0x1 -#define MUX_PWI_SEL_SCLK_HDMI24M 0x2 -#define MUX_PWI_SEL_SCLK_USBPHY0 0x3 -#define MUX_PWI_SEL_SCLK_USBPHY1 0x4 -#define MUX_PWI_SEL_SCLK_HDMIPHY 0x5 -#define MUX_PWI_SEL_SCLKMPLL 0x6 -#define MUX_PWI_SEL_SCLKEPLL 0x7 -#define MUX_PWI_SEL_SCLKVPLL 0x8 -#define MUX_DPHY_SEL_SCLKMPLL 0x0 -#define MUX_DPHY_SEL_SCLKAPLL 0x1 -#define MUX_DMC_BUS_SEL_SCLKMPLL 0x0 -#define MUX_DMC_BUS_SEL_SCLKAPLL 0x1 -#define CLK_SRC_DMC_VAL ((MUX_PWI_SEL_XUSBXTI << 16) \ - | (MUX_DPHY_SEL_SCLKMPLL << 8) \ - | (MUX_DMC_BUS_SEL_SCLKMPLL << 4)) - -/* CLK_DIV_DMC0 */ -#define CORE_TIMERS_RATIO 0x1 -#define COPY2_RATIO 0x3 -#define DMCP_RATIO 0x1 -#define DMCD_RATIO 0x1 -#define DMC_RATIO 0x1 -#define DPHY_RATIO 0x1 -#define ACP_PCLK_RATIO 0x1 -#define ACP_RATIO 0x3 -#define CLK_DIV_DMC0_VAL ((CORE_TIMERS_RATIO << 28) \ - | (COPY2_RATIO << 24) \ - | (DMCP_RATIO << 20) \ - | (DMCD_RATIO << 16) \ - | (DMC_RATIO << 12) \ - | (DPHY_RATIO << 8) \ - | (ACP_PCLK_RATIO << 4) \ - | (ACP_RATIO << 0)) - -/* CLK_DIV_DMC1 */ -#define DPM_RATIO 0x1 -#define DVSEM_RATIO 0x1 -#define PWI_RATIO 0x1 -#define CLK_DIV_DMC1_VAL ((DPM_RATIO << 24) \ - | (DVSEM_RATIO << 16) \ - | (PWI_RATIO << 8)) - -/* CLK_SRC_TOP0 */ -#define MUX_ONENAND_SEL_ACLK_133 0x0 -#define MUX_ONENAND_SEL_ACLK_160 0x1 -#define MUX_ACLK_133_SEL_SCLKMPLL 0x0 -#define MUX_ACLK_133_SEL_SCLKAPLL 0x1 -#define MUX_ACLK_160_SEL_SCLKMPLL 0x0 -#define MUX_ACLK_160_SEL_SCLKAPLL 0x1 -#define MUX_ACLK_100_SEL_SCLKMPLL 0x0 -#define MUX_ACLK_100_SEL_SCLKAPLL 0x1 -#define MUX_ACLK_200_SEL_SCLKMPLL 0x0 -#define MUX_ACLK_200_SEL_SCLKAPLL 0x1 -#define MUX_VPLL_SEL_FINPLL 0x0 -#define MUX_VPLL_SEL_FOUTVPLL 0x1 -#define MUX_EPLL_SEL_FINPLL 0x0 -#define MUX_EPLL_SEL_FOUTEPLL 0x1 -#define MUX_ONENAND_1_SEL_MOUTONENAND 0x0 -#define MUX_ONENAND_1_SEL_SCLKVPLL 0x1 -#define CLK_SRC_TOP0_VAL ((MUX_ONENAND_SEL_ACLK_133 << 28) \ - | (MUX_ACLK_133_SEL_SCLKMPLL << 24) \ - | (MUX_ACLK_160_SEL_SCLKMPLL << 20) \ - | (MUX_ACLK_100_SEL_SCLKMPLL << 16) \ - | (MUX_ACLK_200_SEL_SCLKMPLL << 12) \ - | (MUX_VPLL_SEL_FINPLL << 8) \ - | (MUX_EPLL_SEL_FINPLL << 4)\ - | (MUX_ONENAND_1_SEL_MOUTONENAND << 0)) - -/* CLK_SRC_TOP1 */ -#define VPLLSRC_SEL_FINPLL 0x0 -#define VPLLSRC_SEL_SCLKHDMI24M 0x1 -#define CLK_SRC_TOP1_VAL (VPLLSRC_SEL_FINPLL) - -/* CLK_DIV_TOP */ -#define ONENAND_RATIO 0x0 -#define ACLK_133_RATIO 0x5 -#define ACLK_160_RATIO 0x4 -#define ACLK_100_RATIO 0x7 -#define ACLK_200_RATIO 0x3 -#define CLK_DIV_TOP_VAL ((ONENAND_RATIO << 16) \ - | (ACLK_133_RATIO << 12)\ - | (ACLK_160_RATIO << 8) \ - | (ACLK_100_RATIO << 4) \ - | (ACLK_200_RATIO << 0)) - -/* CLK_SRC_LEFTBUS */ -#define MUX_GDL_SEL_SCLKMPLL 0x0 -#define MUX_GDL_SEL_SCLKAPLL 0x1 -#define CLK_SRC_LEFTBUS_VAL (MUX_GDL_SEL_SCLKMPLL) - -/* CLK_DIV_LEFTBUS */ -#define GPL_RATIO 0x1 -#define GDL_RATIO 0x3 -#define CLK_DIV_LEFTBUS_VAL ((GPL_RATIO << 4) | (GDL_RATIO)) - -/* CLK_SRC_RIGHTBUS */ -#define MUX_GDR_SEL_SCLKMPLL 0x0 -#define MUX_GDR_SEL_SCLKAPLL 0x1 -#define CLK_SRC_RIGHTBUS_VAL (MUX_GDR_SEL_SCLKMPLL) - -/* CLK_DIV_RIGHTBUS */ -#define GPR_RATIO 0x1 -#define GDR_RATIO 0x3 -#define CLK_DIV_RIGHTBUS_VAL ((GPR_RATIO << 4) | (GDR_RATIO)) - -/* CLK_SRS_FSYS: 6 = SCLKMPLL */ -#define SATA_SEL_SCLKMPLL 0 -#define SATA_SEL_SCLKAPLL 1 - -#define MMC_SEL_XXTI 0 -#define MMC_SEL_XUSBXTI 1 -#define MMC_SEL_SCLK_HDMI24M 2 -#define MMC_SEL_SCLK_USBPHY0 3 -#define MMC_SEL_SCLK_USBPHY1 4 -#define MMC_SEL_SCLK_HDMIPHY 5 -#define MMC_SEL_SCLKMPLL 6 -#define MMC_SEL_SCLKEPLL 7 -#define MMC_SEL_SCLKVPLL 8 - -#define MMCC0_SEL MMC_SEL_SCLKMPLL -#define MMCC1_SEL MMC_SEL_SCLKMPLL -#define MMCC2_SEL MMC_SEL_SCLKMPLL -#define MMCC3_SEL MMC_SEL_SCLKMPLL -#define MMCC4_SEL MMC_SEL_SCLKMPLL -#define CLK_SRC_FSYS_VAL ((SATA_SEL_SCLKMPLL << 24) \ - | (MMCC4_SEL << 16) \ - | (MMCC3_SEL << 12) \ - | (MMCC2_SEL << 8) \ - | (MMCC1_SEL << 4) \ - | (MMCC0_SEL << 0)) - -/* SCLK_MMC[0-4] = MOUTMMC[0-4]/(MMC[0-4]_RATIO + 1)/(MMC[0-4]_PRE_RATIO +1) */ -/* CLK_DIV_FSYS1 */ -#define MMC0_RATIO 0xF -#define MMC0_PRE_RATIO 0x0 -#define MMC1_RATIO 0xF -#define MMC1_PRE_RATIO 0x0 -#define CLK_DIV_FSYS1_VAL ((MMC1_PRE_RATIO << 24) \ - | (MMC1_RATIO << 16) \ - | (MMC0_PRE_RATIO << 8) \ - | (MMC0_RATIO << 0)) - -/* CLK_DIV_FSYS2 */ -#define MMC2_RATIO 0xF -#define MMC2_PRE_RATIO 0x0 -#define MMC3_RATIO 0xF -#define MMC3_PRE_RATIO 0x0 -#define CLK_DIV_FSYS2_VAL ((MMC3_PRE_RATIO << 24) \ - | (MMC3_RATIO << 16) \ - | (MMC2_PRE_RATIO << 8) \ - | (MMC2_RATIO << 0)) - -/* CLK_DIV_FSYS3 */ -#define MMC4_RATIO 0xF -#define MMC4_PRE_RATIO 0x0 -#define CLK_DIV_FSYS3_VAL ((MMC4_PRE_RATIO << 8) \ - | (MMC4_RATIO << 0)) - -/* CLK_SRC_PERIL0 */ -#define UART_SEL_XXTI 0 -#define UART_SEL_XUSBXTI 1 -#define UART_SEL_SCLK_HDMI24M 2 -#define UART_SEL_SCLK_USBPHY0 3 -#define UART_SEL_SCLK_USBPHY1 4 -#define UART_SEL_SCLK_HDMIPHY 5 -#define UART_SEL_SCLKMPLL 6 -#define UART_SEL_SCLKEPLL 7 -#define UART_SEL_SCLKVPLL 8 - -#define UART0_SEL UART_SEL_SCLKMPLL -#define UART1_SEL UART_SEL_SCLKMPLL -#define UART2_SEL UART_SEL_SCLKMPLL -#define UART3_SEL UART_SEL_SCLKMPLL -#define UART4_SEL UART_SEL_SCLKMPLL -#define CLK_SRC_PERIL0_VAL ((UART4_SEL << 16) \ - | (UART3_SEL << 12) \ - | (UART2_SEL << 8) \ - | (UART1_SEL << 4) \ - | (UART0_SEL << 0)) - -/* SCLK_UART[0-4] = MOUTUART[0-4]/(UART[0-4]_RATIO + 1) */ -/* CLK_DIV_PERIL0 */ -#define UART0_RATIO 7 -#define UART1_RATIO 7 -#define UART2_RATIO 7 -#define UART3_RATIO 7 -#define UART4_RATIO 7 -#define CLK_DIV_PERIL0_VAL ((UART4_RATIO << 16) \ - | (UART3_RATIO << 12) \ - | (UART2_RATIO << 8) \ - | (UART1_RATIO << 4) \ - | (UART0_RATIO << 0)) - -/* Clock Source CAM/FIMC */ -/* CLK_SRC_CAM */ -#define CAM0_SEL_XUSBXTI 1 -#define CAM1_SEL_XUSBXTI 1 -#define CSIS0_SEL_XUSBXTI 1 -#define CSIS1_SEL_XUSBXTI 1 - -#define FIMC_SEL_SCLKMPLL 6 -#define FIMC0_LCLK_SEL FIMC_SEL_SCLKMPLL -#define FIMC1_LCLK_SEL FIMC_SEL_SCLKMPLL -#define FIMC2_LCLK_SEL FIMC_SEL_SCLKMPLL -#define FIMC3_LCLK_SEL FIMC_SEL_SCLKMPLL - -#define CLK_SRC_CAM_VAL ((CSIS1_SEL_XUSBXTI << 28) \ - | (CSIS0_SEL_XUSBXTI << 24) \ - | (CAM1_SEL_XUSBXTI << 20) \ - | (CAM0_SEL_XUSBXTI << 16) \ - | (FIMC3_LCLK_SEL << 12) \ - | (FIMC2_LCLK_SEL << 8) \ - | (FIMC1_LCLK_SEL << 4) \ - | (FIMC0_LCLK_SEL << 0)) - -/* SCLK CAM */ -/* CLK_DIV_CAM */ -#define FIMC0_LCLK_RATIO 4 -#define FIMC1_LCLK_RATIO 4 -#define FIMC2_LCLK_RATIO 4 -#define FIMC3_LCLK_RATIO 4 -#define CLK_DIV_CAM_VAL ((FIMC3_LCLK_RATIO << 12) \ - | (FIMC2_LCLK_RATIO << 8) \ - | (FIMC1_LCLK_RATIO << 4) \ - | (FIMC0_LCLK_RATIO << 0)) - -/* SCLK MFC */ -/* CLK_SRC_MFC */ -#define MFC_SEL_MPLL 0 -#define MOUTMFC_0 0 -#define MFC_SEL MOUTMFC_0 -#define MFC_0_SEL MFC_SEL_MPLL -#define CLK_SRC_MFC_VAL ((MFC_SEL << 8) | (MFC_0_SEL)) - - -/* CLK_DIV_MFC */ -#define MFC_RATIO 3 -#define CLK_DIV_MFC_VAL (MFC_RATIO) - -/* SCLK G3D */ -/* CLK_SRC_G3D */ -#define G3D_SEL_MPLL 0 -#define MOUTG3D_0 0 -#define G3D_SEL MOUTG3D_0 -#define G3D_0_SEL G3D_SEL_MPLL -#define CLK_SRC_G3D_VAL ((G3D_SEL << 8) | (G3D_0_SEL)) - -/* CLK_DIV_G3D */ -#define G3D_RATIO 1 -#define CLK_DIV_G3D_VAL (G3D_RATIO) - -/* SCLK LCD0 */ -/* CLK_SRC_LCD0 */ -#define FIMD_SEL_SCLKMPLL 6 -#define MDNIE0_SEL_XUSBXTI 1 -#define MDNIE_PWM0_SEL_XUSBXTI 1 -#define MIPI0_SEL_XUSBXTI 1 -#define CLK_SRC_LCD0_VAL ((MIPI0_SEL_XUSBXTI << 12) \ - | (MDNIE_PWM0_SEL_XUSBXTI << 8) \ - | (MDNIE0_SEL_XUSBXTI << 4) \ - | (FIMD_SEL_SCLKMPLL << 0)) - -/* CLK_DIV_LCD0 */ -#define FIMD0_RATIO 4 -#define CLK_DIV_LCD0_VAL (FIMD0_RATIO) - -/* Required period to generate a stable clock output */ -/* PLL_LOCK_TIME */ -#define PLL_LOCKTIME 0x1C20 - -/* PLL Values */ -#define DISABLE 0 -#define ENABLE 1 -#define SET_PLL(mdiv, pdiv, sdiv) ((ENABLE << 31)\ - | (mdiv << 16) \ - | (pdiv << 8) \ - | (sdiv << 0)) - -/* APLL_CON0 */ -#define APLL_MDIV 0xFA -#define APLL_PDIV 0x6 -#define APLL_SDIV 0x1 -#define APLL_CON0_VAL SET_PLL(APLL_MDIV, APLL_PDIV, APLL_SDIV) - -/* APLL_CON1 */ -#define APLL_AFC_ENB 0x1 -#define APLL_AFC 0xC -#define APLL_CON1_VAL ((APLL_AFC_ENB << 31) | (APLL_AFC << 0)) - -/* MPLL_CON0 */ -#define MPLL_MDIV 0xC8 -#define MPLL_PDIV 0x6 -#define MPLL_SDIV 0x1 -#define MPLL_CON0_VAL SET_PLL(MPLL_MDIV, MPLL_PDIV, MPLL_SDIV) - -/* MPLL_CON1 */ -#define MPLL_AFC_ENB 0x0 -#define MPLL_AFC 0x1C -#define MPLL_CON1_VAL ((MPLL_AFC_ENB << 31) | (MPLL_AFC << 0)) - -/* EPLL_CON0 */ -#define EPLL_MDIV 0x30 -#define EPLL_PDIV 0x3 -#define EPLL_SDIV 0x2 -#define EPLL_CON0_VAL SET_PLL(EPLL_MDIV, EPLL_PDIV, EPLL_SDIV) - -/* EPLL_CON1 */ -#define EPLL_K 0x0 -#define EPLL_CON1_VAL (EPLL_K >> 0) - -/* VPLL_CON0 */ -#define VPLL_MDIV 0x35 -#define VPLL_PDIV 0x3 -#define VPLL_SDIV 0x2 -#define VPLL_CON0_VAL SET_PLL(VPLL_MDIV, VPLL_PDIV, VPLL_SDIV) - -/* VPLL_CON1 */ -#define VPLL_SSCG_EN DISABLE -#define VPLL_SEL_PF_DN_SPREAD 0x0 -#define VPLL_MRR 0x11 -#define VPLL_MFR 0x0 -#define VPLL_K 0x400 -#define VPLL_CON1_VAL ((VPLL_SSCG_EN << 31)\ - | (VPLL_SEL_PF_DN_SPREAD << 29) \ - | (VPLL_MRR << 24) \ - | (VPLL_MFR << 16) \ - | (VPLL_K << 0)) -/* - * UART GPIO_A0/GPIO_A1 Control Register Value - * 0x2: UART Function - */ -#define EXYNOS4_GPIO_A0_CON_VAL 0x22222222 -#define EXYNOS4_GPIO_A1_CON_VAL 0x222222 - -/* ULCON: UART Line Control Value 8N1 */ -#define WORD_LEN_5_BIT 0x00 -#define WORD_LEN_6_BIT 0x01 -#define WORD_LEN_7_BIT 0x02 -#define WORD_LEN_8_BIT 0x03 - -#define STOP_BIT_1 0x00 -#define STOP_BIT_2 0x01 - -#define NO_PARITY 0x00 -#define ODD_PARITY 0x4 -#define EVEN_PARITY 0x5 -#define FORCED_PARITY_CHECK_AS_1 0x6 -#define FORCED_PARITY_CHECK_AS_0 0x7 - -#define INFRAMODE_NORMAL 0x00 -#define INFRAMODE_INFRARED 0x01 - -#define ULCON_VAL ((INFRAMODE_NORMAL << 6) \ - | (NO_PARITY << 3) \ - | (STOP_BIT_1 << 2) \ - | (WORD_LEN_8_BIT << 0)) - -/* - * UCON: UART Control Value - * Tx_interrupt Type: Level - * Rx_interrupt Type: Level - * Rx Timeout Enabled: Yes - * Rx-Error Atatus_Int Enable: Yes - * Loop_Back: No - * Break Signal: No - * Transmit mode : Interrupt request/polling - * Receive mode : Interrupt request/polling - */ -#define TX_PULSE_INTERRUPT 0 -#define TX_LEVEL_INTERRUPT 1 -#define RX_PULSE_INTERRUPT 0 -#define RX_LEVEL_INTERRUPT 1 - -#define RX_TIME_OUT ENABLE -#define RX_ERROR_STATE_INT_ENB ENABLE -#define LOOP_BACK DISABLE -#define BREAK_SIGNAL DISABLE - -#define TX_MODE_DISABLED 0X00 -#define TX_MODE_IRQ_OR_POLL 0X01 -#define TX_MODE_DMA 0X02 - -#define RX_MODE_DISABLED 0X00 -#define RX_MODE_IRQ_OR_POLL 0X01 -#define RX_MODE_DMA 0X02 - -#define UCON_VAL ((TX_LEVEL_INTERRUPT << 9) \ - | (RX_LEVEL_INTERRUPT << 8) \ - | (RX_TIME_OUT << 7) \ - | (RX_ERROR_STATE_INT_ENB << 6) \ - | (LOOP_BACK << 5) \ - | (BREAK_SIGNAL << 4) \ - | (TX_MODE_IRQ_OR_POLL << 2) \ - | (RX_MODE_IRQ_OR_POLL << 0)) - -/* - * UFCON: UART FIFO Control Value - * Tx FIFO Trigger LEVEL: 2 Bytes (001) - * Rx FIFO Trigger LEVEL: 2 Bytes (001) - * Tx Fifo Reset: No - * Rx Fifo Reset: No - * FIFO Enable: Yes - */ -#define TX_FIFO_TRIGGER_LEVEL_0_BYTES 0x00 -#define TX_FIFO_TRIGGER_LEVEL_2_BYTES 0x1 -#define TX_FIFO_TRIGGER_LEVEL_4_BYTES 0x2 -#define TX_FIFO_TRIGGER_LEVEL_6_BYTES 0x3 -#define TX_FIFO_TRIGGER_LEVEL_8_BYTES 0x4 -#define TX_FIFO_TRIGGER_LEVEL_10_BYTES 0x5 -#define TX_FIFO_TRIGGER_LEVEL_12_BYTES 0x6 -#define TX_FIFO_TRIGGER_LEVEL_14_BYTES 0x7 - -#define RX_FIFO_TRIGGER_LEVEL_2_BYTES 0x0 -#define RX_FIFO_TRIGGER_LEVEL_4_BYTES 0x1 -#define RX_FIFO_TRIGGER_LEVEL_6_BYTES 0x2 -#define RX_FIFO_TRIGGER_LEVEL_8_BYTES 0x3 -#define RX_FIFO_TRIGGER_LEVEL_10_BYTES 0x4 -#define RX_FIFO_TRIGGER_LEVEL_12_BYTES 0x5 -#define RX_FIFO_TRIGGER_LEVEL_14_BYTES 0x6 -#define RX_FIFO_TRIGGER_LEVEL_16_BYTES 0x7 - -#define TX_FIFO_TRIGGER_LEVEL TX_FIFO_TRIGGER_LEVEL_2_BYTES -#define RX_FIFO_TRIGGER_LEVEL RX_FIFO_TRIGGER_LEVEL_4_BYTES -#define TX_FIFO_RESET DISABLE -#define RX_FIFO_RESET DISABLE -#define FIFO_ENABLE ENABLE -#define UFCON_VAL ((TX_FIFO_TRIGGER_LEVEL << 8) \ - | (RX_FIFO_TRIGGER_LEVEL << 4) \ - | (TX_FIFO_RESET << 2) \ - | (RX_FIFO_RESET << 1) \ - | (FIFO_ENABLE << 0)) -/* - * Baud Rate Division Value - * 115200 BAUD: - * UBRDIV_VAL = SCLK_UART/((115200 * 16) - 1) - * UBRDIV_VAL = (800 MHz)/((115200 * 16) - 1) - */ -#define UBRDIV_VAL 0x35 - -/* - * Fractional Part of Baud Rate Divisor: - * 115200 BAUD: - * UBRFRACVAL = ((((SCLK_UART*10/(115200*16) -10))%10)*16/10) - * UBRFRACVAL = ((((800MHz*10/(115200*16) -10))%10)*16/10) - */ -#define UFRACVAL_VAL 0x4 -#endif diff --git a/board/samsung/smdk5250/Makefile b/board/samsung/smdk5250/Makefile index f2c32ee..9412e37 100644 --- a/board/samsung/smdk5250/Makefile +++ b/board/samsung/smdk5250/Makefile @@ -24,10 +24,6 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -SOBJS := lowlevel_init.o - -COBJS := clock_init.o -COBJS += dmc_common.o dmc_init_ddr3.o COBJS += smdk5250_spl.o ifndef CONFIG_SPL_BUILD @@ -38,14 +34,10 @@ COBJS += smdk5250.o endif endif -ifdef CONFIG_SPL_BUILD -COBJS += spl_boot.o -endif - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) -ALL := $(obj).depend $(LIB) +ALL := $(obj).depend $(LIB) all: $(ALL) diff --git a/board/samsung/smdk5250/clock_init.c b/board/samsung/smdk5250/clock_init.c deleted file mode 100644 index b288e66..0000000 --- a/board/samsung/smdk5250/clock_init.c +++ /dev/null @@ -1,684 +0,0 @@ -/* - * Clock setup for SMDK5250 board based on EXYNOS5 - * - * Copyright (C) 2012 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <config.h> -#include <asm/io.h> -#include <asm/arch/clk.h> -#include <asm/arch/clock.h> -#include <asm/arch/spl.h> -#include <asm/arch/dwmmc.h> - -#include "clock_init.h" -#include "setup.h" - -#define FSYS1_MMC0_DIV_MASK 0xff0f -#define FSYS1_MMC0_DIV_VAL 0x0701 - -DECLARE_GLOBAL_DATA_PTR; - -struct arm_clk_ratios arm_clk_ratios[] = { - { - .arm_freq_mhz = 600, - - .apll_mdiv = 0xc8, - .apll_pdiv = 0x4, - .apll_sdiv = 0x1, - - .arm2_ratio = 0x0, - .apll_ratio = 0x1, - .pclk_dbg_ratio = 0x1, - .atb_ratio = 0x2, - .periph_ratio = 0x7, - .acp_ratio = 0x7, - .cpud_ratio = 0x1, - .arm_ratio = 0x0, - }, { - .arm_freq_mhz = 800, - - .apll_mdiv = 0x64, - .apll_pdiv = 0x3, - .apll_sdiv = 0x0, - - .arm2_ratio = 0x0, - .apll_ratio = 0x1, - .pclk_dbg_ratio = 0x1, - .atb_ratio = 0x3, - .periph_ratio = 0x7, - .acp_ratio = 0x7, - .cpud_ratio = 0x2, - .arm_ratio = 0x0, - }, { - .arm_freq_mhz = 1000, - - .apll_mdiv = 0x7d, - .apll_pdiv = 0x3, - .apll_sdiv = 0x0, - - .arm2_ratio = 0x0, - .apll_ratio = 0x1, - .pclk_dbg_ratio = 0x1, - .atb_ratio = 0x4, - .periph_ratio = 0x7, - .acp_ratio = 0x7, - .cpud_ratio = 0x2, - .arm_ratio = 0x0, - }, { - .arm_freq_mhz = 1200, - - .apll_mdiv = 0x96, - .apll_pdiv = 0x3, - .apll_sdiv = 0x0, - - .arm2_ratio = 0x0, - .apll_ratio = 0x3, - .pclk_dbg_ratio = 0x1, - .atb_ratio = 0x5, - .periph_ratio = 0x7, - .acp_ratio = 0x7, - .cpud_ratio = 0x3, - .arm_ratio = 0x0, - }, { - .arm_freq_mhz = 1400, - - .apll_mdiv = 0xaf, - .apll_pdiv = 0x3, - .apll_sdiv = 0x0, - - .arm2_ratio = 0x0, - .apll_ratio = 0x3, - .pclk_dbg_ratio = 0x1, - .atb_ratio = 0x6, - .periph_ratio = 0x7, - .acp_ratio = 0x7, - .cpud_ratio = 0x3, - .arm_ratio = 0x0, - }, { - .arm_freq_mhz = 1700, - - .apll_mdiv = 0x1a9, - .apll_pdiv = 0x6, - .apll_sdiv = 0x0, - - .arm2_ratio = 0x0, - .apll_ratio = 0x3, - .pclk_dbg_ratio = 0x1, - .atb_ratio = 0x6, - .periph_ratio = 0x7, - .acp_ratio = 0x7, - .cpud_ratio = 0x3, - .arm_ratio = 0x0, - } -}; -struct mem_timings mem_timings[] = { - { - .mem_manuf = MEM_MANUF_ELPIDA, - .mem_type = DDR_MODE_DDR3, - .frequency_mhz = 800, - .mpll_mdiv = 0xc8, - .mpll_pdiv = 0x3, - .mpll_sdiv = 0x0, - .cpll_mdiv = 0xde, - .cpll_pdiv = 0x4, - .cpll_sdiv = 0x2, - .gpll_mdiv = 0x215, - .gpll_pdiv = 0xc, - .gpll_sdiv = 0x1, - .epll_mdiv = 0x60, - .epll_pdiv = 0x3, - .epll_sdiv = 0x3, - .vpll_mdiv = 0x96, - .vpll_pdiv = 0x3, - .vpll_sdiv = 0x2, - - .bpll_mdiv = 0x64, - .bpll_pdiv = 0x3, - .bpll_sdiv = 0x0, - .pclk_cdrex_ratio = 0x5, - .direct_cmd_msr = { - 0x00020018, 0x00030000, 0x00010042, 0x00000d70 - }, - .timing_ref = 0x000000bb, - .timing_row = 0x8c36650e, - .timing_data = 0x3630580b, - .timing_power = 0x41000a44, - .phy0_dqs = 0x08080808, - .phy1_dqs = 0x08080808, - .phy0_dq = 0x08080808, - .phy1_dq = 0x08080808, - .phy0_tFS = 0x4, - .phy1_tFS = 0x4, - .phy0_pulld_dqs = 0xf, - .phy1_pulld_dqs = 0xf, - - .lpddr3_ctrl_phy_reset = 0x1, - .ctrl_start_point = 0x10, - .ctrl_inc = 0x10, - .ctrl_start = 0x1, - .ctrl_dll_on = 0x1, - .ctrl_ref = 0x8, - - .ctrl_force = 0x1a, - .ctrl_rdlat = 0x0b, - .ctrl_bstlen = 0x08, - - .fp_resync = 0x8, - .iv_size = 0x7, - .dfi_init_start = 1, - .aref_en = 1, - - .rd_fetch = 0x3, - - .zq_mode_dds = 0x7, - .zq_mode_term = 0x1, - .zq_mode_noterm = 0, - - /* - * Dynamic Clock: Always Running - * Memory Burst length: 8 - * Number of chips: 1 - * Memory Bus width: 32 bit - * Memory Type: DDR3 - * Additional Latancy for PLL: 0 Cycle - */ - .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | - DMC_MEMCONTROL_DPWRDN_DISABLE | - DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | - DMC_MEMCONTROL_TP_DISABLE | - DMC_MEMCONTROL_DSREF_ENABLE | - DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | - DMC_MEMCONTROL_MEM_TYPE_DDR3 | - DMC_MEMCONTROL_MEM_WIDTH_32BIT | - DMC_MEMCONTROL_NUM_CHIP_1 | - DMC_MEMCONTROL_BL_8 | - DMC_MEMCONTROL_PZQ_DISABLE | - DMC_MEMCONTROL_MRR_BYTE_7_0, - .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED | - DMC_MEMCONFIGx_CHIP_COL_10 | - DMC_MEMCONFIGx_CHIP_ROW_15 | - DMC_MEMCONFIGx_CHIP_BANK_8, - .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), - .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), - .prechconfig_tp_cnt = 0xff, - .dpwrdn_cyc = 0xff, - .dsref_cyc = 0xffff, - .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | - DMC_CONCONTROL_TIMEOUT_LEVEL0 | - DMC_CONCONTROL_RD_FETCH_DISABLE | - DMC_CONCONTROL_EMPTY_DISABLE | - DMC_CONCONTROL_AREF_EN_DISABLE | - DMC_CONCONTROL_IO_PD_CON_DISABLE, - .dmc_channels = 2, - .chips_per_channel = 2, - .chips_to_configure = 1, - .send_zq_init = 1, - .impedance = IMP_OUTPUT_DRV_30_OHM, - .gate_leveling_enable = 0, - }, { - .mem_manuf = MEM_MANUF_SAMSUNG, - .mem_type = DDR_MODE_DDR3, - .frequency_mhz = 800, - .mpll_mdiv = 0xc8, - .mpll_pdiv = 0x3, - .mpll_sdiv = 0x0, - .cpll_mdiv = 0xde, - .cpll_pdiv = 0x4, - .cpll_sdiv = 0x2, - .gpll_mdiv = 0x215, - .gpll_pdiv = 0xc, - .gpll_sdiv = 0x1, - .epll_mdiv = 0x60, - .epll_pdiv = 0x3, - .epll_sdiv = 0x3, - .vpll_mdiv = 0x96, - .vpll_pdiv = 0x3, - .vpll_sdiv = 0x2, - - .bpll_mdiv = 0x64, - .bpll_pdiv = 0x3, - .bpll_sdiv = 0x0, - .pclk_cdrex_ratio = 0x5, - .direct_cmd_msr = { - 0x00020018, 0x00030000, 0x00010000, 0x00000d70 - }, - .timing_ref = 0x000000bb, - .timing_row = 0x8c36650e, - .timing_data = 0x3630580b, - .timing_power = 0x41000a44, - .phy0_dqs = 0x08080808, - .phy1_dqs = 0x08080808, - .phy0_dq = 0x08080808, - .phy1_dq = 0x08080808, - .phy0_tFS = 0x8, - .phy1_tFS = 0x8, - .phy0_pulld_dqs = 0xf, - .phy1_pulld_dqs = 0xf, - - .lpddr3_ctrl_phy_reset = 0x1, - .ctrl_start_point = 0x10, - .ctrl_inc = 0x10, - .ctrl_start = 0x1, - .ctrl_dll_on = 0x1, - .ctrl_ref = 0x8, - - .ctrl_force = 0x1a, - .ctrl_rdlat = 0x0b, - .ctrl_bstlen = 0x08, - - .fp_resync = 0x8, - .iv_size = 0x7, - .dfi_init_start = 1, - .aref_en = 1, - - .rd_fetch = 0x3, - - .zq_mode_dds = 0x5, - .zq_mode_term = 0x1, - .zq_mode_noterm = 1, - - /* - * Dynamic Clock: Always Running - * Memory Burst length: 8 - * Number of chips: 1 - * Memory Bus width: 32 bit - * Memory Type: DDR3 - * Additional Latancy for PLL: 0 Cycle - */ - .memcontrol = DMC_MEMCONTROL_CLK_STOP_DISABLE | - DMC_MEMCONTROL_DPWRDN_DISABLE | - DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE | - DMC_MEMCONTROL_TP_DISABLE | - DMC_MEMCONTROL_DSREF_ENABLE | - DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(0) | - DMC_MEMCONTROL_MEM_TYPE_DDR3 | - DMC_MEMCONTROL_MEM_WIDTH_32BIT | - DMC_MEMCONTROL_NUM_CHIP_1 | - DMC_MEMCONTROL_BL_8 | - DMC_MEMCONTROL_PZQ_DISABLE | - DMC_MEMCONTROL_MRR_BYTE_7_0, - .memconfig = DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED | - DMC_MEMCONFIGx_CHIP_COL_10 | - DMC_MEMCONFIGx_CHIP_ROW_15 | - DMC_MEMCONFIGx_CHIP_BANK_8, - .membaseconfig0 = DMC_MEMBASECONFIG_VAL(0x40), - .membaseconfig1 = DMC_MEMBASECONFIG_VAL(0x80), - .prechconfig_tp_cnt = 0xff, - .dpwrdn_cyc = 0xff, - .dsref_cyc = 0xffff, - .concontrol = DMC_CONCONTROL_DFI_INIT_START_DISABLE | - DMC_CONCONTROL_TIMEOUT_LEVEL0 | - DMC_CONCONTROL_RD_FETCH_DISABLE | - DMC_CONCONTROL_EMPTY_DISABLE | - DMC_CONCONTROL_AREF_EN_DISABLE | - DMC_CONCONTROL_IO_PD_CON_DISABLE, - .dmc_channels = 2, - .chips_per_channel = 2, - .chips_to_configure = 1, - .send_zq_init = 1, - .impedance = IMP_OUTPUT_DRV_40_OHM, - .gate_leveling_enable = 1, - } -}; - -/** - * Get the required memory type and speed (SPL version). - * - * In SPL we have no device tree, so we use the machine parameters - * - * @param mem_type Returns memory type - * @param frequency_mhz Returns memory speed in MHz - * @param arm_freq Returns ARM clock speed in MHz - * @param mem_manuf Return Memory Manufacturer name - * @return 0 if all ok - */ -static int clock_get_mem_selection(enum ddr_mode *mem_type, - unsigned *frequency_mhz, unsigned *arm_freq, - enum mem_manuf *mem_manuf) -{ - struct spl_machine_param *params; - - params = spl_get_machine_params(); - *mem_type = params->mem_type; - *frequency_mhz = params->frequency_mhz; - *arm_freq = params->arm_freq_mhz; - *mem_manuf = params->mem_manuf; - - return 0; -} - -/* Get the ratios for setting ARM clock */ -struct arm_clk_ratios *get_arm_ratios(void) -{ - struct arm_clk_ratios *arm_ratio; - enum ddr_mode mem_type; - enum mem_manuf mem_manuf; - unsigned frequency_mhz, arm_freq; - int i; - - if (clock_get_mem_selection(&mem_type, &frequency_mhz, - &arm_freq, &mem_manuf)) - ; - for (i = 0, arm_ratio = arm_clk_ratios; i < ARRAY_SIZE(arm_clk_ratios); - i++, arm_ratio++) { - if (arm_ratio->arm_freq_mhz == arm_freq) - return arm_ratio; - } - - /* will hang if failed to find clock ratio */ - while (1) - ; - - return NULL; -} - -struct mem_timings *clock_get_mem_timings(void) -{ - struct mem_timings *mem; - enum ddr_mode mem_type; - enum mem_manuf mem_manuf; - unsigned frequency_mhz, arm_freq; - int i; - - if (!clock_get_mem_selection(&mem_type, &frequency_mhz, - &arm_freq, &mem_manuf)) { - for (i = 0, mem = mem_timings; i < ARRAY_SIZE(mem_timings); - i++, mem++) { - if (mem->mem_type == mem_type && - mem->frequency_mhz == frequency_mhz && - mem->mem_manuf == mem_manuf) - return mem; - } - } - - /* will hang if failed to find memory timings */ - while (1) - ; - - return NULL; -} - -void system_clock_init() -{ - struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE; - struct mem_timings *mem; - struct arm_clk_ratios *arm_clk_ratio; - u32 val, tmp; - - mem = clock_get_mem_timings(); - arm_clk_ratio = get_arm_ratios(); - - clrbits_le32(&clk->src_cpu, MUX_APLL_SEL_MASK); - do { - val = readl(&clk->mux_stat_cpu); - } while ((val | MUX_APLL_SEL_MASK) != val); - - clrbits_le32(&clk->src_core1, MUX_MPLL_SEL_MASK); - do { - val = readl(&clk->mux_stat_core1); - } while ((val | MUX_MPLL_SEL_MASK) != val); - - clrbits_le32(&clk->src_top2, MUX_CPLL_SEL_MASK); - clrbits_le32(&clk->src_top2, MUX_EPLL_SEL_MASK); - clrbits_le32(&clk->src_top2, MUX_VPLL_SEL_MASK); - clrbits_le32(&clk->src_top2, MUX_GPLL_SEL_MASK); - tmp = MUX_CPLL_SEL_MASK | MUX_EPLL_SEL_MASK | MUX_VPLL_SEL_MASK - | MUX_GPLL_SEL_MASK; - do { - val = readl(&clk->mux_stat_top2); - } while ((val | tmp) != val); - - clrbits_le32(&clk->src_cdrex, MUX_BPLL_SEL_MASK); - do { - val = readl(&clk->mux_stat_cdrex); - } while ((val | MUX_BPLL_SEL_MASK) != val); - - /* PLL locktime */ - writel(APLL_LOCK_VAL, &clk->apll_lock); - - writel(MPLL_LOCK_VAL, &clk->mpll_lock); - - writel(BPLL_LOCK_VAL, &clk->bpll_lock); - - writel(CPLL_LOCK_VAL, &clk->cpll_lock); - - writel(GPLL_LOCK_VAL, &clk->gpll_lock); - - writel(EPLL_LOCK_VAL, &clk->epll_lock); - - writel(VPLL_LOCK_VAL, &clk->vpll_lock); - - writel(CLK_REG_DISABLE, &clk->pll_div2_sel); - - writel(MUX_HPM_SEL_MASK, &clk->src_cpu); - do { - val = readl(&clk->mux_stat_cpu); - } while ((val | HPM_SEL_SCLK_MPLL) != val); - - val = arm_clk_ratio->arm2_ratio << 28 - | arm_clk_ratio->apll_ratio << 24 - | arm_clk_ratio->pclk_dbg_ratio << 20 - | arm_clk_ratio->atb_ratio << 16 - | arm_clk_ratio->periph_ratio << 12 - | arm_clk_ratio->acp_ratio << 8 - | arm_clk_ratio->cpud_ratio << 4 - | arm_clk_ratio->arm_ratio; - writel(val, &clk->div_cpu0); - do { - val = readl(&clk->div_stat_cpu0); - } while (0 != val); - - writel(CLK_DIV_CPU1_VAL, &clk->div_cpu1); - do { - val = readl(&clk->div_stat_cpu1); - } while (0 != val); - - /* Set APLL */ - writel(APLL_CON1_VAL, &clk->apll_con1); - val = set_pll(arm_clk_ratio->apll_mdiv, arm_clk_ratio->apll_pdiv, - arm_clk_ratio->apll_sdiv); - writel(val, &clk->apll_con0); - while ((readl(&clk->apll_con0) & APLL_CON0_LOCKED) == 0) - ; - - /* Set MPLL */ - writel(MPLL_CON1_VAL, &clk->mpll_con1); - val = set_pll(mem->mpll_mdiv, mem->mpll_pdiv, mem->mpll_sdiv); - writel(val, &clk->mpll_con0); - while ((readl(&clk->mpll_con0) & MPLL_CON0_LOCKED) == 0) - ; - - /* Set BPLL */ - writel(BPLL_CON1_VAL, &clk->bpll_con1); - val = set_pll(mem->bpll_mdiv, mem->bpll_pdiv, mem->bpll_sdiv); - writel(val, &clk->bpll_con0); - while ((readl(&clk->bpll_con0) & BPLL_CON0_LOCKED) == 0) - ; - - /* Set CPLL */ - writel(CPLL_CON1_VAL, &clk->cpll_con1); - val = set_pll(mem->cpll_mdiv, mem->cpll_pdiv, mem->cpll_sdiv); - writel(val, &clk->cpll_con0); - while ((readl(&clk->cpll_con0) & CPLL_CON0_LOCKED) == 0) - ; - - /* Set GPLL */ - writel(GPLL_CON1_VAL, &clk->gpll_con1); - val = set_pll(mem->gpll_mdiv, mem->gpll_pdiv, mem->gpll_sdiv); - writel(val, &clk->gpll_con0); - while ((readl(&clk->gpll_con0) & GPLL_CON0_LOCKED) == 0) - ; - - /* Set EPLL */ - writel(EPLL_CON2_VAL, &clk->epll_con2); - writel(EPLL_CON1_VAL, &clk->epll_con1); - val = set_pll(mem->epll_mdiv, mem->epll_pdiv, mem->epll_sdiv); - writel(val, &clk->epll_con0); - while ((readl(&clk->epll_con0) & EPLL_CON0_LOCKED) == 0) - ; - - /* Set VPLL */ - writel(VPLL_CON2_VAL, &clk->vpll_con2); - writel(VPLL_CON1_VAL, &clk->vpll_con1); - val = set_pll(mem->vpll_mdiv, mem->vpll_pdiv, mem->vpll_sdiv); - writel(val, &clk->vpll_con0); - while ((readl(&clk->vpll_con0) & VPLL_CON0_LOCKED) == 0) - ; - - writel(CLK_SRC_CORE0_VAL, &clk->src_core0); - writel(CLK_DIV_CORE0_VAL, &clk->div_core0); - while (readl(&clk->div_stat_core0) != 0) - ; - - writel(CLK_DIV_CORE1_VAL, &clk->div_core1); - while (readl(&clk->div_stat_core1) != 0) - ; - - writel(CLK_DIV_SYSRGT_VAL, &clk->div_sysrgt); - while (readl(&clk->div_stat_sysrgt) != 0) - ; - - writel(CLK_DIV_ACP_VAL, &clk->div_acp); - while (readl(&clk->div_stat_acp) != 0) - ; - - writel(CLK_DIV_SYSLFT_VAL, &clk->div_syslft); - while (readl(&clk->div_stat_syslft) != 0) - ; - - writel(CLK_SRC_TOP0_VAL, &clk->src_top0); - writel(CLK_SRC_TOP1_VAL, &clk->src_top1); - writel(TOP2_VAL, &clk->src_top2); - writel(CLK_SRC_TOP3_VAL, &clk->src_top3); - - writel(CLK_DIV_TOP0_VAL, &clk->div_top0); - while (readl(&clk->div_stat_top0)) - ; - - writel(CLK_DIV_TOP1_VAL, &clk->div_top1); - while (readl(&clk->div_stat_top1)) - ; - - writel(CLK_SRC_LEX_VAL, &clk->src_lex); - while (1) { - val = readl(&clk->mux_stat_lex); - if (val == (val | 1)) - break; - } - - writel(CLK_DIV_LEX_VAL, &clk->div_lex); - while (readl(&clk->div_stat_lex)) - ; - - writel(CLK_DIV_R0X_VAL, &clk->div_r0x); - while (readl(&clk->div_stat_r0x)) - ; - - writel(CLK_DIV_R0X_VAL, &clk->div_r0x); - while (readl(&clk->div_stat_r0x)) - ; - - writel(CLK_DIV_R1X_VAL, &clk->div_r1x); - while (readl(&clk->div_stat_r1x)) - ; - - writel(CLK_REG_DISABLE, &clk->src_cdrex); - - writel(CLK_DIV_CDREX_VAL, &clk->div_cdrex); - while (readl(&clk->div_stat_cdrex)) - ; - - val = readl(&clk->src_cpu); - val |= CLK_SRC_CPU_VAL; - writel(val, &clk->src_cpu); - - val = readl(&clk->src_top2); - val |= CLK_SRC_TOP2_VAL; - writel(val, &clk->src_top2); - - val = readl(&clk->src_core1); - val |= CLK_SRC_CORE1_VAL; - writel(val, &clk->src_core1); - - writel(CLK_SRC_FSYS0_VAL, &clk->src_fsys); - writel(CLK_DIV_FSYS0_VAL, &clk->div_fsys0); - while (readl(&clk->div_stat_fsys0)) - ; - - writel(CLK_REG_DISABLE, &clk->clkout_cmu_cpu); - writel(CLK_REG_DISABLE, &clk->clkout_cmu_core); - writel(CLK_REG_DISABLE, &clk->clkout_cmu_acp); - writel(CLK_REG_DISABLE, &clk->clkout_cmu_top); - writel(CLK_REG_DISABLE, &clk->clkout_cmu_lex); - writel(CLK_REG_DISABLE, &clk->clkout_cmu_r0x); - writel(CLK_REG_DISABLE, &clk->clkout_cmu_r1x); - writel(CLK_REG_DISABLE, &clk->clkout_cmu_cdrex); - - writel(CLK_SRC_PERIC0_VAL, &clk->src_peric0); - writel(CLK_DIV_PERIC0_VAL, &clk->div_peric0); - - writel(CLK_SRC_PERIC1_VAL, &clk->src_peric1); - writel(CLK_DIV_PERIC1_VAL, &clk->div_peric1); - writel(CLK_DIV_PERIC2_VAL, &clk->div_peric2); - writel(CLK_DIV_PERIC3_VAL, &clk->div_peric3); - - writel(SCLK_SRC_ISP_VAL, &clk->sclk_src_isp); - writel(SCLK_DIV_ISP_VAL, &clk->sclk_div_isp); - writel(CLK_DIV_ISP0_VAL, &clk->div_isp0); - writel(CLK_DIV_ISP1_VAL, &clk->div_isp1); - writel(CLK_DIV_ISP2_VAL, &clk->div_isp2); - - /* FIMD1 SRC CLK SELECTION */ - writel(CLK_SRC_DISP1_0_VAL, &clk->src_disp1_0); - - val = MMC2_PRE_RATIO_VAL << MMC2_PRE_RATIO_OFFSET - | MMC2_RATIO_VAL << MMC2_RATIO_OFFSET - | MMC3_PRE_RATIO_VAL << MMC3_PRE_RATIO_OFFSET - | MMC3_RATIO_VAL << MMC3_RATIO_OFFSET; - writel(val, &clk->div_fsys2); -} - -void clock_init_dp_clock(void) -{ - struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE; - - /* DP clock enable */ - setbits_le32(&clk->gate_ip_disp1, CLK_GATE_DP1_ALLOW); - - /* We run DP at 267 Mhz */ - setbits_le32(&clk->div_disp1_0, CLK_DIV_DISP1_0_FIMD1); -} - -/* - * Set clock divisor value for booting from EMMC. - * Set DWMMC channel-0 clk div to operate mmc0 device at 50MHz. - */ -void emmc_boot_clk_div_set(void) -{ - struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE; - unsigned int div_mmc; - - div_mmc = readl((unsigned int) &clk->div_fsys1) & ~FSYS1_MMC0_DIV_MASK; - div_mmc |= FSYS1_MMC0_DIV_VAL; - writel(div_mmc, (unsigned int) &clk->div_fsys1); -} diff --git a/board/samsung/smdk5250/clock_init.h b/board/samsung/smdk5250/clock_init.h deleted file mode 100644 index 20a1d47..0000000 --- a/board/samsung/smdk5250/clock_init.h +++ /dev/null @@ -1,154 +0,0 @@ -/* - * Clock initialization routines - * - * Copyright (c) 2011 The Chromium OS Authors. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __EXYNOS_CLOCK_INIT_H -#define __EXYNOS_CLOCK_INIT_H - -enum { - MEM_TIMINGS_MSR_COUNT = 4, -}; - -/* These are the ratio's for configuring ARM clock */ -struct arm_clk_ratios { - unsigned arm_freq_mhz; /* Frequency of ARM core in MHz */ - - unsigned apll_mdiv; - unsigned apll_pdiv; - unsigned apll_sdiv; - - unsigned arm2_ratio; - unsigned apll_ratio; - unsigned pclk_dbg_ratio; - unsigned atb_ratio; - unsigned periph_ratio; - unsigned acp_ratio; - unsigned cpud_ratio; - unsigned arm_ratio; -}; - -/* These are the memory timings for a particular memory type and speed */ -struct mem_timings { - enum mem_manuf mem_manuf; /* Memory manufacturer */ - enum ddr_mode mem_type; /* Memory type */ - unsigned frequency_mhz; /* Frequency of memory in MHz */ - - /* Here follow the timing parameters for the selected memory */ - unsigned apll_mdiv; - unsigned apll_pdiv; - unsigned apll_sdiv; - unsigned mpll_mdiv; - unsigned mpll_pdiv; - unsigned mpll_sdiv; - unsigned cpll_mdiv; - unsigned cpll_pdiv; - unsigned cpll_sdiv; - unsigned gpll_mdiv; - unsigned gpll_pdiv; - unsigned gpll_sdiv; - unsigned epll_mdiv; - unsigned epll_pdiv; - unsigned epll_sdiv; - unsigned vpll_mdiv; - unsigned vpll_pdiv; - unsigned vpll_sdiv; - unsigned bpll_mdiv; - unsigned bpll_pdiv; - unsigned bpll_sdiv; - unsigned pclk_cdrex_ratio; - unsigned direct_cmd_msr[MEM_TIMINGS_MSR_COUNT]; - - unsigned timing_ref; - unsigned timing_row; - unsigned timing_data; - unsigned timing_power; - - /* DQS, DQ, DEBUG offsets */ - unsigned phy0_dqs; - unsigned phy1_dqs; - unsigned phy0_dq; - unsigned phy1_dq; - unsigned phy0_tFS; - unsigned phy1_tFS; - unsigned phy0_pulld_dqs; - unsigned phy1_pulld_dqs; - - unsigned lpddr3_ctrl_phy_reset; - unsigned ctrl_start_point; - unsigned ctrl_inc; - unsigned ctrl_start; - unsigned ctrl_dll_on; - unsigned ctrl_ref; - - unsigned ctrl_force; - unsigned ctrl_rdlat; - unsigned ctrl_bstlen; - - unsigned fp_resync; - unsigned iv_size; - unsigned dfi_init_start; - unsigned aref_en; - - unsigned rd_fetch; - - unsigned zq_mode_dds; - unsigned zq_mode_term; - unsigned zq_mode_noterm; /* 1 to allow termination disable */ - - unsigned memcontrol; - unsigned memconfig; - - unsigned membaseconfig0; - unsigned membaseconfig1; - unsigned prechconfig_tp_cnt; - unsigned dpwrdn_cyc; - unsigned dsref_cyc; - unsigned concontrol; - /* Channel and Chip Selection */ - uint8_t dmc_channels; /* number of memory channels */ - uint8_t chips_per_channel; /* number of chips per channel */ - uint8_t chips_to_configure; /* number of chips to configure */ - uint8_t send_zq_init; /* 1 to send this command */ - unsigned impedance; /* drive strength impedeance */ - uint8_t gate_leveling_enable; /* check gate leveling is enabled */ -}; - -/** - * Get the correct memory timings for our selected memory type and speed. - * - * This function can be called from SPL or the main U-Boot. - * - * @return pointer to the memory timings that we should use - */ -struct mem_timings *clock_get_mem_timings(void); - -/* - * Initialize clock for the device - */ -void system_clock_init(void); - -/* - * Set clock divisor value for booting from EMMC. - */ -void emmc_boot_clk_div_set(void); -#endif diff --git a/board/samsung/smdk5250/dmc_common.c b/board/samsung/smdk5250/dmc_common.c deleted file mode 100644 index 109602a..0000000 --- a/board/samsung/smdk5250/dmc_common.c +++ /dev/null @@ -1,199 +0,0 @@ -/* - * Mem setup common file for different types of DDR present on SMDK5250 boards. - * - * Copyright (C) 2012 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/arch/spl.h> - -#include "clock_init.h" -#include "setup.h" - -#define ZQ_INIT_TIMEOUT 10000 - -int dmc_config_zq(struct mem_timings *mem, - struct exynos5_phy_control *phy0_ctrl, - struct exynos5_phy_control *phy1_ctrl) -{ - unsigned long val = 0; - int i; - - /* - * ZQ Calibration: - * Select Driver Strength, - * long calibration for manual calibration - */ - val = PHY_CON16_RESET_VAL; - val |= mem->zq_mode_dds << PHY_CON16_ZQ_MODE_DDS_SHIFT; - val |= mem->zq_mode_term << PHY_CON16_ZQ_MODE_TERM_SHIFT; - val |= ZQ_CLK_DIV_EN; - writel(val, &phy0_ctrl->phy_con16); - writel(val, &phy1_ctrl->phy_con16); - - /* Disable termination */ - if (mem->zq_mode_noterm) - val |= PHY_CON16_ZQ_MODE_NOTERM_MASK; - writel(val, &phy0_ctrl->phy_con16); - writel(val, &phy1_ctrl->phy_con16); - - /* ZQ_MANUAL_START: Enable */ - val |= ZQ_MANUAL_STR; - writel(val, &phy0_ctrl->phy_con16); - writel(val, &phy1_ctrl->phy_con16); - - /* ZQ_MANUAL_START: Disable */ - val &= ~ZQ_MANUAL_STR; - - /* - * Since we are manaully calibrating the ZQ values, - * we are looping for the ZQ_init to complete. - */ - i = ZQ_INIT_TIMEOUT; - while ((readl(&phy0_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) { - sdelay(100); - i--; - } - if (!i) - return -1; - writel(val, &phy0_ctrl->phy_con16); - - i = ZQ_INIT_TIMEOUT; - while ((readl(&phy1_ctrl->phy_con17) & ZQ_DONE) != ZQ_DONE && i > 0) { - sdelay(100); - i--; - } - if (!i) - return -1; - writel(val, &phy1_ctrl->phy_con16); - - return 0; -} - -void update_reset_dll(struct exynos5_dmc *dmc, enum ddr_mode mode) -{ - unsigned long val; - - if (mode == DDR_MODE_DDR3) { - val = MEM_TERM_EN | PHY_TERM_EN | DMC_CTRL_SHGATE; - writel(val, &dmc->phycontrol0); - } - - /* Update DLL Information: Force DLL Resyncronization */ - val = readl(&dmc->phycontrol0); - val |= FP_RSYNC; - writel(val, &dmc->phycontrol0); - - /* Reset Force DLL Resyncronization */ - val = readl(&dmc->phycontrol0); - val &= ~FP_RSYNC; - writel(val, &dmc->phycontrol0); -} - -void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc) -{ - int channel, chip; - - for (channel = 0; channel < mem->dmc_channels; channel++) { - unsigned long mask; - - mask = channel << DIRECT_CMD_CHANNEL_SHIFT; - for (chip = 0; chip < mem->chips_to_configure; chip++) { - int i; - - mask |= chip << DIRECT_CMD_CHIP_SHIFT; - - /* Sending NOP command */ - writel(DIRECT_CMD_NOP | mask, &dmc->directcmd); - - /* - * TODO(alim.akhtar@samsung.com): Do we need these - * delays? This one and the next were not there for - * DDR3. - */ - sdelay(0x10000); - - /* Sending EMRS/MRS commands */ - for (i = 0; i < MEM_TIMINGS_MSR_COUNT; i++) { - writel(mem->direct_cmd_msr[i] | mask, - &dmc->directcmd); - sdelay(0x10000); - } - - if (mem->send_zq_init) { - /* Sending ZQINIT command */ - writel(DIRECT_CMD_ZQINIT | mask, - &dmc->directcmd); - - sdelay(10000); - } - } - } -} - -void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc) -{ - int channel, chip; - - for (channel = 0; channel < mem->dmc_channels; channel++) { - unsigned long mask; - - mask = channel << DIRECT_CMD_CHANNEL_SHIFT; - for (chip = 0; chip < mem->chips_per_channel; chip++) { - mask |= chip << DIRECT_CMD_CHIP_SHIFT; - - /* PALL (all banks precharge) CMD */ - writel(DIRECT_CMD_PALL | mask, &dmc->directcmd); - sdelay(0x10000); - } - } -} - -void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc) -{ - writel(mem->memconfig, &dmc->memconfig0); - writel(mem->memconfig, &dmc->memconfig1); - writel(DMC_MEMBASECONFIG0_VAL, &dmc->membaseconfig0); - writel(DMC_MEMBASECONFIG1_VAL, &dmc->membaseconfig1); -} - -void mem_ctrl_init() -{ - struct spl_machine_param *param = spl_get_machine_params(); - struct mem_timings *mem; - int ret; - - mem = clock_get_mem_timings(); - - /* If there are any other memory variant, add their init call below */ - if (param->mem_type == DDR_MODE_DDR3) { - ret = ddr3_mem_ctrl_init(mem, param->mem_iv_size); - if (ret) { - /* will hang if failed to init memory control */ - while (1) - ; - } - } else { - /* will hang if unknow memory type */ - while (1) - ; - } -} diff --git a/board/samsung/smdk5250/dmc_init_ddr3.c b/board/samsung/smdk5250/dmc_init_ddr3.c deleted file mode 100644 index e050790..0000000 --- a/board/samsung/smdk5250/dmc_init_ddr3.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * DDR3 mem setup file for SMDK5250 board based on EXYNOS5 - * - * Copyright (C) 2012 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <asm/io.h> -#include <asm/arch/clock.h> -#include <asm/arch/cpu.h> -#include <asm/arch/dmc.h> -#include "setup.h" -#include "clock_init.h" - -#define RDLVL_COMPLETE_TIMEOUT 10000 - -static void reset_phy_ctrl(void) -{ - struct exynos5_clock *clk = (struct exynos5_clock *)EXYNOS5_CLOCK_BASE; - - writel(DDR3PHY_CTRL_PHY_RESET_OFF, &clk->lpddr3phy_ctrl); - writel(DDR3PHY_CTRL_PHY_RESET, &clk->lpddr3phy_ctrl); -} - -int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size) -{ - unsigned int val; - struct exynos5_phy_control *phy0_ctrl, *phy1_ctrl; - struct exynos5_dmc *dmc; - int i; - - phy0_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY0_BASE; - phy1_ctrl = (struct exynos5_phy_control *)EXYNOS5_DMC_PHY1_BASE; - dmc = (struct exynos5_dmc *)EXYNOS5_DMC_CTRL_BASE; - - reset_phy_ctrl(); - - /* Set Impedance Output Driver */ - val = (mem->impedance << CA_CK_DRVR_DS_OFFSET) | - (mem->impedance << CA_CKE_DRVR_DS_OFFSET) | - (mem->impedance << CA_CS_DRVR_DS_OFFSET) | - (mem->impedance << CA_ADR_DRVR_DS_OFFSET); - writel(val, &phy0_ctrl->phy_con39); - writel(val, &phy1_ctrl->phy_con39); - - /* Set Read Latency and Burst Length for PHY0 and PHY1 */ - val = (mem->ctrl_bstlen << PHY_CON42_CTRL_BSTLEN_SHIFT) | - (mem->ctrl_rdlat << PHY_CON42_CTRL_RDLAT_SHIFT); - writel(val, &phy0_ctrl->phy_con42); - writel(val, &phy1_ctrl->phy_con42); - - /* ZQ Calibration */ - if (dmc_config_zq(mem, phy0_ctrl, phy1_ctrl)) - return SETUP_ERR_ZQ_CALIBRATION_FAILURE; - - /* DQ Signal */ - writel(mem->phy0_pulld_dqs, &phy0_ctrl->phy_con14); - writel(mem->phy1_pulld_dqs, &phy1_ctrl->phy_con14); - - writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) - | (mem->dfi_init_start << CONCONTROL_DFI_INIT_START_SHIFT), - &dmc->concontrol); - - update_reset_dll(dmc, DDR_MODE_DDR3); - - /* DQS Signal */ - writel(mem->phy0_dqs, &phy0_ctrl->phy_con4); - writel(mem->phy1_dqs, &phy1_ctrl->phy_con4); - - writel(mem->phy0_dq, &phy0_ctrl->phy_con6); - writel(mem->phy1_dq, &phy1_ctrl->phy_con6); - - writel(mem->phy0_tFS, &phy0_ctrl->phy_con10); - writel(mem->phy1_tFS, &phy1_ctrl->phy_con10); - - val = (mem->ctrl_start_point << PHY_CON12_CTRL_START_POINT_SHIFT) | - (mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) | - (mem->ctrl_dll_on << PHY_CON12_CTRL_DLL_ON_SHIFT) | - (mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT); - writel(val, &phy0_ctrl->phy_con12); - writel(val, &phy1_ctrl->phy_con12); - - /* Start DLL locking */ - writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT), - &phy0_ctrl->phy_con12); - writel(val | (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT), - &phy1_ctrl->phy_con12); - - update_reset_dll(dmc, DDR_MODE_DDR3); - - writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT), - &dmc->concontrol); - - /* Memory Channel Inteleaving Size */ - writel(mem->iv_size, &dmc->ivcontrol); - - writel(mem->memconfig, &dmc->memconfig0); - writel(mem->memconfig, &dmc->memconfig1); - writel(mem->membaseconfig0, &dmc->membaseconfig0); - writel(mem->membaseconfig1, &dmc->membaseconfig1); - - /* Precharge Configuration */ - writel(mem->prechconfig_tp_cnt << PRECHCONFIG_TP_CNT_SHIFT, - &dmc->prechconfig); - - /* Power Down mode Configuration */ - writel(mem->dpwrdn_cyc << PWRDNCONFIG_DPWRDN_CYC_SHIFT | - mem->dsref_cyc << PWRDNCONFIG_DSREF_CYC_SHIFT, - &dmc->pwrdnconfig); - - /* TimingRow, TimingData, TimingPower and Timingaref - * values as per Memory AC parameters - */ - writel(mem->timing_ref, &dmc->timingref); - writel(mem->timing_row, &dmc->timingrow); - writel(mem->timing_data, &dmc->timingdata); - writel(mem->timing_power, &dmc->timingpower); - - /* Send PALL command */ - dmc_config_prech(mem, dmc); - - /* Send NOP, MRS and ZQINIT commands */ - dmc_config_mrs(mem, dmc); - - if (mem->gate_leveling_enable) { - val = PHY_CON0_RESET_VAL; - val |= P0_CMD_EN; - writel(val, &phy0_ctrl->phy_con0); - writel(val, &phy1_ctrl->phy_con0); - - val = PHY_CON2_RESET_VAL; - val |= INIT_DESKEW_EN; - writel(val, &phy0_ctrl->phy_con2); - writel(val, &phy1_ctrl->phy_con2); - - val = PHY_CON0_RESET_VAL; - val |= P0_CMD_EN; - val |= BYTE_RDLVL_EN; - writel(val, &phy0_ctrl->phy_con0); - writel(val, &phy1_ctrl->phy_con0); - - val = (mem->ctrl_start_point << - PHY_CON12_CTRL_START_POINT_SHIFT) | - (mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) | - (mem->ctrl_force << PHY_CON12_CTRL_FORCE_SHIFT) | - (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT) | - (mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT); - writel(val, &phy0_ctrl->phy_con12); - writel(val, &phy1_ctrl->phy_con12); - - val = PHY_CON2_RESET_VAL; - val |= INIT_DESKEW_EN; - val |= RDLVL_GATE_EN; - writel(val, &phy0_ctrl->phy_con2); - writel(val, &phy1_ctrl->phy_con2); - - val = PHY_CON0_RESET_VAL; - val |= P0_CMD_EN; - val |= BYTE_RDLVL_EN; - val |= CTRL_SHGATE; - writel(val, &phy0_ctrl->phy_con0); - writel(val, &phy1_ctrl->phy_con0); - - val = PHY_CON1_RESET_VAL; - val &= ~(CTRL_GATEDURADJ_MASK); - writel(val, &phy0_ctrl->phy_con1); - writel(val, &phy1_ctrl->phy_con1); - - writel(CTRL_RDLVL_GATE_ENABLE, &dmc->rdlvl_config); - i = RDLVL_COMPLETE_TIMEOUT; - while ((readl(&dmc->phystatus) & - (RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1)) != - (RDLVL_COMPLETE_CHO | RDLVL_COMPLETE_CH1) && i > 0) { - /* - * TODO(waihong): Comment on how long this take to - * timeout - */ - sdelay(100); - i--; - } - if (!i) - return SETUP_ERR_RDLV_COMPLETE_TIMEOUT; - writel(CTRL_RDLVL_GATE_DISABLE, &dmc->rdlvl_config); - - writel(0, &phy0_ctrl->phy_con14); - writel(0, &phy1_ctrl->phy_con14); - - val = (mem->ctrl_start_point << - PHY_CON12_CTRL_START_POINT_SHIFT) | - (mem->ctrl_inc << PHY_CON12_CTRL_INC_SHIFT) | - (mem->ctrl_force << PHY_CON12_CTRL_FORCE_SHIFT) | - (mem->ctrl_start << PHY_CON12_CTRL_START_SHIFT) | - (mem->ctrl_dll_on << PHY_CON12_CTRL_DLL_ON_SHIFT) | - (mem->ctrl_ref << PHY_CON12_CTRL_REF_SHIFT); - writel(val, &phy0_ctrl->phy_con12); - writel(val, &phy1_ctrl->phy_con12); - - update_reset_dll(dmc, DDR_MODE_DDR3); - } - - /* Send PALL command */ - dmc_config_prech(mem, dmc); - - writel(mem->memcontrol, &dmc->memcontrol); - - /* Set DMC Concontrol and enable auto-refresh counter */ - writel(mem->concontrol | (mem->rd_fetch << CONCONTROL_RD_FETCH_SHIFT) - | (mem->aref_en << CONCONTROL_AREF_EN_SHIFT), &dmc->concontrol); - return 0; -} diff --git a/board/samsung/smdk5250/setup.h b/board/samsung/smdk5250/setup.h deleted file mode 100644 index eb91d13..0000000 --- a/board/samsung/smdk5250/setup.h +++ /dev/null @@ -1,569 +0,0 @@ -/* - * Machine Specific Values for SMDK5250 board based on EXYNOS5 - * - * Copyright (C) 2012 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _SMDK5250_SETUP_H -#define _SMDK5250_SETUP_H - -#include <config.h> -#include <asm/arch/dmc.h> - -/* APLL_CON1 */ -#define APLL_CON1_VAL (0x00203800) - -/* MPLL_CON1 */ -#define MPLL_CON1_VAL (0x00203800) - -/* CPLL_CON1 */ -#define CPLL_CON1_VAL (0x00203800) - -/* GPLL_CON1 */ -#define GPLL_CON1_VAL (0x00203800) - -/* EPLL_CON1, CON2 */ -#define EPLL_CON1_VAL 0x00000000 -#define EPLL_CON2_VAL 0x00000080 - -/* VPLL_CON1, CON2 */ -#define VPLL_CON1_VAL 0x00000000 -#define VPLL_CON2_VAL 0x00000080 - -/* BPLL_CON1 */ -#define BPLL_CON1_VAL 0x00203800 - -/* Set PLL */ -#define set_pll(mdiv, pdiv, sdiv) (1<<31 | mdiv<<16 | pdiv<<8 | sdiv) - -/* CLK_SRC_CPU */ -/* 0 = MOUTAPLL, 1 = SCLKMPLL */ -#define MUX_HPM_SEL 0 -#define MUX_CPU_SEL 0 -#define MUX_APLL_SEL 1 - -#define CLK_SRC_CPU_VAL ((MUX_HPM_SEL << 20) \ - | (MUX_CPU_SEL << 16) \ - | (MUX_APLL_SEL)) - -/* MEMCONTROL register bit fields */ -#define DMC_MEMCONTROL_CLK_STOP_DISABLE (0 << 0) -#define DMC_MEMCONTROL_DPWRDN_DISABLE (0 << 1) -#define DMC_MEMCONTROL_DPWRDN_ACTIVE_PRECHARGE (0 << 2) -#define DMC_MEMCONTROL_TP_DISABLE (0 << 4) -#define DMC_MEMCONTROL_DSREF_DISABLE (0 << 5) -#define DMC_MEMCONTROL_DSREF_ENABLE (1 << 5) -#define DMC_MEMCONTROL_ADD_LAT_PALL_CYCLE(x) (x << 6) - -#define DMC_MEMCONTROL_MEM_TYPE_LPDDR3 (7 << 8) -#define DMC_MEMCONTROL_MEM_TYPE_DDR3 (6 << 8) -#define DMC_MEMCONTROL_MEM_TYPE_LPDDR2 (5 << 8) - -#define DMC_MEMCONTROL_MEM_WIDTH_32BIT (2 << 12) - -#define DMC_MEMCONTROL_NUM_CHIP_1 (0 << 16) -#define DMC_MEMCONTROL_NUM_CHIP_2 (1 << 16) - -#define DMC_MEMCONTROL_BL_8 (3 << 20) -#define DMC_MEMCONTROL_BL_4 (2 << 20) - -#define DMC_MEMCONTROL_PZQ_DISABLE (0 << 24) - -#define DMC_MEMCONTROL_MRR_BYTE_7_0 (0 << 25) -#define DMC_MEMCONTROL_MRR_BYTE_15_8 (1 << 25) -#define DMC_MEMCONTROL_MRR_BYTE_23_16 (2 << 25) -#define DMC_MEMCONTROL_MRR_BYTE_31_24 (3 << 25) - -/* MEMCONFIG0 register bit fields */ -#define DMC_MEMCONFIGx_CHIP_MAP_INTERLEAVED (1 << 12) -#define DMC_MEMCONFIGx_CHIP_COL_10 (3 << 8) -#define DMC_MEMCONFIGx_CHIP_ROW_14 (2 << 4) -#define DMC_MEMCONFIGx_CHIP_ROW_15 (3 << 4) -#define DMC_MEMCONFIGx_CHIP_BANK_8 (3 << 0) - -#define DMC_MEMBASECONFIGx_CHIP_BASE(x) (x << 16) -#define DMC_MEMBASECONFIGx_CHIP_MASK(x) (x << 0) -#define DMC_MEMBASECONFIG_VAL(x) ( \ - DMC_MEMBASECONFIGx_CHIP_BASE(x) | \ - DMC_MEMBASECONFIGx_CHIP_MASK(0x780) \ -) - -#define DMC_MEMBASECONFIG0_VAL DMC_MEMBASECONFIG_VAL(0x40) -#define DMC_MEMBASECONFIG1_VAL DMC_MEMBASECONFIG_VAL(0x80) - -#define DMC_PRECHCONFIG_VAL 0xFF000000 -#define DMC_PWRDNCONFIG_VAL 0xFFFF00FF - -#define DMC_CONCONTROL_RESET_VAL 0x0FFF0000 -#define DFI_INIT_START (1 << 28) -#define EMPTY (1 << 8) -#define AREF_EN (1 << 5) - -#define DFI_INIT_COMPLETE_CHO (1 << 2) -#define DFI_INIT_COMPLETE_CH1 (1 << 3) - -#define RDLVL_COMPLETE_CHO (1 << 14) -#define RDLVL_COMPLETE_CH1 (1 << 15) - -#define CLK_STOP_EN (1 << 0) -#define DPWRDN_EN (1 << 1) -#define DSREF_EN (1 << 5) - -/* COJCONTROL register bit fields */ -#define DMC_CONCONTROL_IO_PD_CON_DISABLE (0 << 3) -#define DMC_CONCONTROL_AREF_EN_DISABLE (0 << 5) -#define DMC_CONCONTROL_EMPTY_DISABLE (0 << 8) -#define DMC_CONCONTROL_EMPTY_ENABLE (1 << 8) -#define DMC_CONCONTROL_RD_FETCH_DISABLE (0x0 << 12) -#define DMC_CONCONTROL_TIMEOUT_LEVEL0 (0xFFF << 16) -#define DMC_CONCONTROL_DFI_INIT_START_DISABLE (0 << 28) - -/* CLK_DIV_CPU0_VAL */ -#define CLK_DIV_CPU0_VAL ((ARM2_RATIO << 28) \ - | (APLL_RATIO << 24) \ - | (PCLK_DBG_RATIO << 20) \ - | (ATB_RATIO << 16) \ - | (PERIPH_RATIO << 12) \ - | (ACP_RATIO << 8) \ - | (CPUD_RATIO << 4) \ - | (ARM_RATIO)) - - -/* CLK_FSYS */ -#define CLK_SRC_FSYS0_VAL 0x66666 -#define CLK_DIV_FSYS0_VAL 0x0BB00000 - -/* CLK_DIV_CPU1 */ -#define HPM_RATIO 0x2 -#define COPY_RATIO 0x0 - -/* CLK_DIV_CPU1 = 0x00000003 */ -#define CLK_DIV_CPU1_VAL ((HPM_RATIO << 4) \ - | (COPY_RATIO)) - -/* CLK_SRC_CORE0 */ -#define CLK_SRC_CORE0_VAL 0x00000000 - -/* CLK_SRC_CORE1 */ -#define CLK_SRC_CORE1_VAL 0x100 - -/* CLK_DIV_CORE0 */ -#define CLK_DIV_CORE0_VAL 0x00120000 - -/* CLK_DIV_CORE1 */ -#define CLK_DIV_CORE1_VAL 0x07070700 - -/* CLK_DIV_SYSRGT */ -#define CLK_DIV_SYSRGT_VAL 0x00000111 - -/* CLK_DIV_ACP */ -#define CLK_DIV_ACP_VAL 0x12 - -/* CLK_DIV_SYSLFT */ -#define CLK_DIV_SYSLFT_VAL 0x00000311 - -/* CLK_SRC_CDREX */ -#define CLK_SRC_CDREX_VAL 0x1 - -/* CLK_DIV_CDREX */ -#define MCLK_CDREX2_RATIO 0x0 -#define ACLK_EFCON_RATIO 0x1 -#define MCLK_DPHY_RATIO 0x1 -#define MCLK_CDREX_RATIO 0x1 -#define ACLK_C2C_200_RATIO 0x1 -#define C2C_CLK_400_RATIO 0x1 -#define PCLK_CDREX_RATIO 0x1 -#define ACLK_CDREX_RATIO 0x1 - -#define CLK_DIV_CDREX_VAL ((MCLK_DPHY_RATIO << 24) \ - | (C2C_CLK_400_RATIO << 6) \ - | (PCLK_CDREX_RATIO << 4) \ - | (ACLK_CDREX_RATIO)) - -/* CLK_SRC_TOP0 */ -#define MUX_ACLK_300_GSCL_SEL 0x0 -#define MUX_ACLK_300_GSCL_MID_SEL 0x0 -#define MUX_ACLK_400_G3D_MID_SEL 0x0 -#define MUX_ACLK_333_SEL 0x0 -#define MUX_ACLK_300_DISP1_SEL 0x0 -#define MUX_ACLK_300_DISP1_MID_SEL 0x0 -#define MUX_ACLK_200_SEL 0x0 -#define MUX_ACLK_166_SEL 0x0 -#define CLK_SRC_TOP0_VAL ((MUX_ACLK_300_GSCL_SEL << 25) \ - | (MUX_ACLK_300_GSCL_MID_SEL << 24) \ - | (MUX_ACLK_400_G3D_MID_SEL << 20) \ - | (MUX_ACLK_333_SEL << 16) \ - | (MUX_ACLK_300_DISP1_SEL << 15) \ - | (MUX_ACLK_300_DISP1_MID_SEL << 14) \ - | (MUX_ACLK_200_SEL << 12) \ - | (MUX_ACLK_166_SEL << 8)) - -/* CLK_SRC_TOP1 */ -#define MUX_ACLK_400_G3D_SEL 0x1 -#define MUX_ACLK_400_ISP_SEL 0x0 -#define MUX_ACLK_400_IOP_SEL 0x0 -#define MUX_ACLK_MIPI_HSI_TXBASE_SEL 0x0 -#define MUX_ACLK_300_GSCL_MID1_SEL 0x0 -#define MUX_ACLK_300_DISP1_MID1_SEL 0x0 -#define CLK_SRC_TOP1_VAL ((MUX_ACLK_400_G3D_SEL << 28) \ - |(MUX_ACLK_400_ISP_SEL << 24) \ - |(MUX_ACLK_400_IOP_SEL << 20) \ - |(MUX_ACLK_MIPI_HSI_TXBASE_SEL << 16) \ - |(MUX_ACLK_300_GSCL_MID1_SEL << 12) \ - |(MUX_ACLK_300_DISP1_MID1_SEL << 8)) - -/* CLK_SRC_TOP2 */ -#define MUX_GPLL_SEL 0x1 -#define MUX_BPLL_USER_SEL 0x0 -#define MUX_MPLL_USER_SEL 0x0 -#define MUX_VPLL_SEL 0x1 -#define MUX_EPLL_SEL 0x1 -#define MUX_CPLL_SEL 0x1 -#define VPLLSRC_SEL 0x0 -#define CLK_SRC_TOP2_VAL ((MUX_GPLL_SEL << 28) \ - | (MUX_BPLL_USER_SEL << 24) \ - | (MUX_MPLL_USER_SEL << 20) \ - | (MUX_VPLL_SEL << 16) \ - | (MUX_EPLL_SEL << 12) \ - | (MUX_CPLL_SEL << 8) \ - | (VPLLSRC_SEL)) -/* CLK_SRC_TOP3 */ -#define MUX_ACLK_333_SUB_SEL 0x1 -#define MUX_ACLK_400_SUB_SEL 0x1 -#define MUX_ACLK_266_ISP_SUB_SEL 0x1 -#define MUX_ACLK_266_GPS_SUB_SEL 0x0 -#define MUX_ACLK_300_GSCL_SUB_SEL 0x1 -#define MUX_ACLK_266_GSCL_SUB_SEL 0x1 -#define MUX_ACLK_300_DISP1_SUB_SEL 0x1 -#define MUX_ACLK_200_DISP1_SUB_SEL 0x1 -#define CLK_SRC_TOP3_VAL ((MUX_ACLK_333_SUB_SEL << 24) \ - | (MUX_ACLK_400_SUB_SEL << 20) \ - | (MUX_ACLK_266_ISP_SUB_SEL << 16) \ - | (MUX_ACLK_266_GPS_SUB_SEL << 12) \ - | (MUX_ACLK_300_GSCL_SUB_SEL << 10) \ - | (MUX_ACLK_266_GSCL_SUB_SEL << 8) \ - | (MUX_ACLK_300_DISP1_SUB_SEL << 6) \ - | (MUX_ACLK_200_DISP1_SUB_SEL << 4)) - -/* CLK_DIV_TOP0 */ -#define ACLK_300_DISP1_RATIO 0x2 -#define ACLK_400_G3D_RATIO 0x0 -#define ACLK_333_RATIO 0x0 -#define ACLK_266_RATIO 0x2 -#define ACLK_200_RATIO 0x3 -#define ACLK_166_RATIO 0x1 -#define ACLK_133_RATIO 0x1 -#define ACLK_66_RATIO 0x5 - -#define CLK_DIV_TOP0_VAL ((ACLK_300_DISP1_RATIO << 28) \ - | (ACLK_400_G3D_RATIO << 24) \ - | (ACLK_333_RATIO << 20) \ - | (ACLK_266_RATIO << 16) \ - | (ACLK_200_RATIO << 12) \ - | (ACLK_166_RATIO << 8) \ - | (ACLK_133_RATIO << 4) \ - | (ACLK_66_RATIO)) - -/* CLK_DIV_TOP1 */ -#define ACLK_MIPI_HSI_TX_BASE_RATIO 0x3 -#define ACLK_66_PRE_RATIO 0x1 -#define ACLK_400_ISP_RATIO 0x1 -#define ACLK_400_IOP_RATIO 0x1 -#define ACLK_300_GSCL_RATIO 0x2 - -#define CLK_DIV_TOP1_VAL ((ACLK_MIPI_HSI_TX_BASE_RATIO << 28) \ - | (ACLK_66_PRE_RATIO << 24) \ - | (ACLK_400_ISP_RATIO << 20) \ - | (ACLK_400_IOP_RATIO << 16) \ - | (ACLK_300_GSCL_RATIO << 12)) - -/* APLL_LOCK */ -#define APLL_LOCK_VAL (0x546) -/* MPLL_LOCK */ -#define MPLL_LOCK_VAL (0x546) -/* CPLL_LOCK */ -#define CPLL_LOCK_VAL (0x546) -/* GPLL_LOCK */ -#define GPLL_LOCK_VAL (0x546) -/* EPLL_LOCK */ -#define EPLL_LOCK_VAL (0x3A98) -/* VPLL_LOCK */ -#define VPLL_LOCK_VAL (0x3A98) -/* BPLL_LOCK */ -#define BPLL_LOCK_VAL (0x546) - -#define MUX_APLL_SEL_MASK (1 << 0) -#define MUX_MPLL_SEL_MASK (1 << 8) -#define MPLL_SEL_MOUT_MPLLFOUT (2 << 8) -#define MUX_CPLL_SEL_MASK (1 << 8) -#define MUX_EPLL_SEL_MASK (1 << 12) -#define MUX_VPLL_SEL_MASK (1 << 16) -#define MUX_GPLL_SEL_MASK (1 << 28) -#define MUX_BPLL_SEL_MASK (1 << 0) -#define MUX_HPM_SEL_MASK (1 << 20) -#define HPM_SEL_SCLK_MPLL (1 << 21) -#define APLL_CON0_LOCKED (1 << 29) -#define MPLL_CON0_LOCKED (1 << 29) -#define BPLL_CON0_LOCKED (1 << 29) -#define CPLL_CON0_LOCKED (1 << 29) -#define EPLL_CON0_LOCKED (1 << 29) -#define GPLL_CON0_LOCKED (1 << 29) -#define VPLL_CON0_LOCKED (1 << 29) -#define CLK_REG_DISABLE 0x0 -#define TOP2_VAL 0x0110000 - -/* CLK_SRC_PERIC0 */ -#define PWM_SEL 6 -#define UART3_SEL 6 -#define UART2_SEL 6 -#define UART1_SEL 6 -#define UART0_SEL 6 -/* SRC_CLOCK = SCLK_MPLL */ -#define CLK_SRC_PERIC0_VAL ((PWM_SEL << 24) \ - | (UART3_SEL << 12) \ - | (UART2_SEL << 8) \ - | (UART1_SEL << 4) \ - | (UART0_SEL)) - -/* CLK_SRC_PERIC1 */ -/* SRC_CLOCK = SCLK_MPLL */ -#define SPI0_SEL 6 -#define SPI1_SEL 6 -#define SPI2_SEL 6 -#define CLK_SRC_PERIC1_VAL ((SPI2_SEL << 24) \ - | (SPI1_SEL << 20) \ - | (SPI0_SEL << 16)) - -/* SCLK_SRC_ISP - set SPI0/1 to 6 = SCLK_MPLL_USER */ -#define SPI0_ISP_SEL 6 -#define SPI1_ISP_SEL 6 -#define SCLK_SRC_ISP_VAL (SPI1_ISP_SEL << 4) \ - | (SPI0_ISP_SEL << 0) - -/* SCLK_DIV_ISP - set SPI0/1 to 0xf = divide by 16 */ -#define SPI0_ISP_RATIO 0xf -#define SPI1_ISP_RATIO 0xf -#define SCLK_DIV_ISP_VAL (SPI1_ISP_RATIO << 12) \ - | (SPI0_ISP_RATIO << 0) - -/* CLK_DIV_PERIL0 */ -#define UART5_RATIO 7 -#define UART4_RATIO 7 -#define UART3_RATIO 7 -#define UART2_RATIO 7 -#define UART1_RATIO 7 -#define UART0_RATIO 7 - -#define CLK_DIV_PERIC0_VAL ((UART3_RATIO << 12) \ - | (UART2_RATIO << 8) \ - | (UART1_RATIO << 4) \ - | (UART0_RATIO)) -/* CLK_DIV_PERIC1 */ -#define SPI1_RATIO 0x7 -#define SPI0_RATIO 0xf -#define SPI1_SUB_RATIO 0x0 -#define SPI0_SUB_RATIO 0x0 -#define CLK_DIV_PERIC1_VAL ((SPI1_SUB_RATIO << 24) \ - | ((SPI1_RATIO << 16) \ - | (SPI0_SUB_RATIO << 8) \ - | (SPI0_RATIO << 0))) - -/* CLK_DIV_PERIC2 */ -#define SPI2_RATIO 0xf -#define SPI2_SUB_RATIO 0x0 -#define CLK_DIV_PERIC2_VAL ((SPI2_SUB_RATIO << 8) \ - | (SPI2_RATIO << 0)) - -/* CLK_DIV_PERIC3 */ -#define PWM_RATIO 8 -#define CLK_DIV_PERIC3_VAL (PWM_RATIO << 0) - -/* CLK_DIV_FSYS2 */ -#define MMC2_RATIO_MASK 0xf -#define MMC2_RATIO_VAL 0x3 -#define MMC2_RATIO_OFFSET 0 - -#define MMC2_PRE_RATIO_MASK 0xff -#define MMC2_PRE_RATIO_VAL 0x9 -#define MMC2_PRE_RATIO_OFFSET 8 - -#define MMC3_RATIO_MASK 0xf -#define MMC3_RATIO_VAL 0x1 -#define MMC3_RATIO_OFFSET 16 - -#define MMC3_PRE_RATIO_MASK 0xff -#define MMC3_PRE_RATIO_VAL 0x0 -#define MMC3_PRE_RATIO_OFFSET 24 - -/* CLK_SRC_LEX */ -#define CLK_SRC_LEX_VAL 0x0 - -/* CLK_DIV_LEX */ -#define CLK_DIV_LEX_VAL 0x10 - -/* CLK_DIV_R0X */ -#define CLK_DIV_R0X_VAL 0x10 - -/* CLK_DIV_L0X */ -#define CLK_DIV_R1X_VAL 0x10 - -/* CLK_DIV_ISP0 */ -#define CLK_DIV_ISP0_VAL 0x31 - -/* CLK_DIV_ISP1 */ -#define CLK_DIV_ISP1_VAL 0x0 - -/* CLK_DIV_ISP2 */ -#define CLK_DIV_ISP2_VAL 0x1 - -/* CLK_SRC_DISP1_0 */ -#define CLK_SRC_DISP1_0_VAL 0x6 - -/* - * DIV_DISP1_0 - * For DP, divisor should be 2 - */ -#define CLK_DIV_DISP1_0_FIMD1 (2 << 0) - -/* CLK_GATE_IP_DISP1 */ -#define CLK_GATE_DP1_ALLOW (1 << 4) - -#define DDR3PHY_CTRL_PHY_RESET (1 << 0) -#define DDR3PHY_CTRL_PHY_RESET_OFF (0 << 0) - -#define PHY_CON0_RESET_VAL 0x17020a40 -#define P0_CMD_EN (1 << 14) -#define BYTE_RDLVL_EN (1 << 13) -#define CTRL_SHGATE (1 << 8) - -#define PHY_CON1_RESET_VAL 0x09210100 -#define CTRL_GATEDURADJ_MASK (0xf << 20) - -#define PHY_CON2_RESET_VAL 0x00010004 -#define INIT_DESKEW_EN (1 << 6) -#define RDLVL_GATE_EN (1 << 24) - -/*ZQ Configurations */ -#define PHY_CON16_RESET_VAL 0x08000304 - -#define ZQ_CLK_DIV_EN (1 << 18) -#define ZQ_MANUAL_STR (1 << 1) -#define ZQ_DONE (1 << 0) - -#define CTRL_RDLVL_GATE_ENABLE 1 -#define CTRL_RDLVL_GATE_DISABLE 1 - -/* Direct Command */ -#define DIRECT_CMD_NOP 0x07000000 -#define DIRECT_CMD_PALL 0x01000000 -#define DIRECT_CMD_ZQINIT 0x0a000000 -#define DIRECT_CMD_CHANNEL_SHIFT 28 -#define DIRECT_CMD_CHIP_SHIFT 20 - -/* DMC PHY Control0 register */ -#define PHY_CONTROL0_RESET_VAL 0x0 -#define MEM_TERM_EN (1 << 31) /* Termination enable for memory */ -#define PHY_TERM_EN (1 << 30) /* Termination enable for PHY */ -#define DMC_CTRL_SHGATE (1 << 29) /* Duration of DQS gating signal */ -#define FP_RSYNC (1 << 3) /* Force DLL resyncronization */ - -/* Driver strength for CK, CKE, CS & CA */ -#define IMP_OUTPUT_DRV_40_OHM 0x5 -#define IMP_OUTPUT_DRV_30_OHM 0x7 -#define CA_CK_DRVR_DS_OFFSET 9 -#define CA_CKE_DRVR_DS_OFFSET 6 -#define CA_CS_DRVR_DS_OFFSET 3 -#define CA_ADR_DRVR_DS_OFFSET 0 - -#define PHY_CON42_CTRL_BSTLEN_SHIFT 8 -#define PHY_CON42_CTRL_RDLAT_SHIFT 0 - -struct mem_timings; - -/* Errors that we can encourter in low-level setup */ -enum { - SETUP_ERR_OK, - SETUP_ERR_RDLV_COMPLETE_TIMEOUT = -1, - SETUP_ERR_ZQ_CALIBRATION_FAILURE = -2, -}; - -/* - * Memory variant specific initialization code - * - * @param mem Memory timings for this memory type. - * @param mem_iv_size Memory interleaving size is a configurable parameter - * which the DMC uses to decide how to split a memory - * chunk into smaller chunks to support concurrent - * accesses; may vary across boards. - * @return 0 if ok, SETUP_ERR_... if there is a problem - */ -int ddr3_mem_ctrl_init(struct mem_timings *mem, unsigned long mem_iv_size); - -/* - * Configure ZQ I/O interface - * - * @param mem Memory timings for this memory type. - * @param phy0_ctrl Pointer to struct containing PHY0 control reg - * @param phy1_ctrl Pointer to struct containing PHY1 control reg - * @return 0 if ok, -1 on error - */ -int dmc_config_zq(struct mem_timings *mem, - struct exynos5_phy_control *phy0_ctrl, - struct exynos5_phy_control *phy1_ctrl); - -/* - * Send NOP and MRS/EMRS Direct commands - * - * @param mem Memory timings for this memory type. - * @param dmc Pointer to struct of DMC registers - */ -void dmc_config_mrs(struct mem_timings *mem, struct exynos5_dmc *dmc); - -/* - * Send PALL Direct commands - * - * @param mem Memory timings for this memory type. - * @param dmc Pointer to struct of DMC registers - */ -void dmc_config_prech(struct mem_timings *mem, struct exynos5_dmc *dmc); - -/* - * Configure the memconfig and membaseconfig registers - * - * @param mem Memory timings for this memory type. - * @param exynos5_dmc Pointer to struct of DMC registers - */ -void dmc_config_memory(struct mem_timings *mem, struct exynos5_dmc *dmc); - -/* - * Reset the DLL. This function is common between DDR3 and LPDDR2. - * However, the reset value is different. So we are passing a flag - * ddr_mode to distinguish between LPDDR2 and DDR3. - * - * @param exynos5_dmc Pointer to struct of DMC registers - * @param ddr_mode Type of DDR memory - */ -void update_reset_dll(struct exynos5_dmc *, enum ddr_mode); - -void sdelay(unsigned long); -void mem_ctrl_init(void); -void system_clock_init(void); -#endif diff --git a/board/samsung/smdk5250/spl_boot.c b/board/samsung/smdk5250/spl_boot.c deleted file mode 100644 index 83275f1..0000000 --- a/board/samsung/smdk5250/spl_boot.c +++ /dev/null @@ -1,151 +0,0 @@ -/* - * Copyright (C) 2012 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include<common.h> -#include<config.h> - -#include <asm/arch-exynos/dmc.h> -#include <asm/arch/clock.h> -#include <asm/arch/clk.h> -#include <asm/arch/spl.h> - -#include "clock_init.h" - -/* Index into irom ptr table */ -enum index { - MMC_INDEX, - EMMC44_INDEX, - EMMC44_END_INDEX, - SPI_INDEX, - USB_INDEX, -}; - -/* IROM Function Pointers Table */ -u32 irom_ptr_table[] = { - [MMC_INDEX] = 0x02020030, /* iROM Function Pointer-SDMMC boot */ - [EMMC44_INDEX] = 0x02020044, /* iROM Function Pointer-EMMC4.4 boot*/ - [EMMC44_END_INDEX] = 0x02020048,/* iROM Function Pointer - -EMMC4.4 end boot operation */ - [SPI_INDEX] = 0x02020058, /* iROM Function Pointer-SPI boot */ - [USB_INDEX] = 0x02020070, /* iROM Function Pointer-USB boot*/ - }; - -void *get_irom_func(int index) -{ - return (void *)*(u32 *)irom_ptr_table[index]; -} - -/* - * Set/clear program flow prediction and return the previous state. - */ -static int config_branch_prediction(int set_cr_z) -{ - unsigned int cr; - - /* System Control Register: 11th bit Z Branch prediction enable */ - cr = get_cr(); - set_cr(set_cr_z ? cr | CR_Z : cr & ~CR_Z); - - return cr & CR_Z; -} - -/* -* Copy U-boot from mmc to RAM: -* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains -* Pointer to API (Data transfer from mmc to ram) -*/ -void copy_uboot_to_ram(void) -{ - int is_cr_z_set; - unsigned int sec_boot_check; - enum boot_mode bootmode = BOOT_MODE_OM; - - u32 (*spi_copy)(u32 offset, u32 nblock, u32 dst); - u32 (*copy_bl2)(u32 offset, u32 nblock, u32 dst); - u32 (*copy_bl2_from_emmc)(u32 nblock, u32 dst); - void (*end_bootop_from_emmc)(void); - u32 (*usb_copy)(void); - - /* Read iRAM location to check for secondary USB boot mode */ - sec_boot_check = readl(EXYNOS_IRAM_SECONDARY_BASE); - if (sec_boot_check == EXYNOS_USB_SECONDARY_BOOT) - bootmode = BOOT_MODE_USB; - - if (bootmode == BOOT_MODE_OM) - bootmode = readl(EXYNOS5_POWER_BASE) & OM_STAT; - - switch (bootmode) { - case BOOT_MODE_SERIAL: - spi_copy = get_irom_func(SPI_INDEX); - spi_copy(SPI_FLASH_UBOOT_POS, CONFIG_BL2_SIZE, - CONFIG_SYS_TEXT_BASE); - break; - case BOOT_MODE_MMC: - copy_bl2 = get_irom_func(MMC_INDEX); - copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, - CONFIG_SYS_TEXT_BASE); - break; - case BOOT_MODE_EMMC: - /* Set the FSYS1 clock divisor value for EMMC boot */ - emmc_boot_clk_div_set(); - - copy_bl2_from_emmc = get_irom_func(EMMC44_INDEX); - end_bootop_from_emmc = get_irom_func(EMMC44_END_INDEX); - - copy_bl2_from_emmc(BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE); - end_bootop_from_emmc(); - break; - case BOOT_MODE_USB: - /* - * iROM needs program flow prediction to be disabled - * before copy from USB device to RAM - */ - is_cr_z_set = config_branch_prediction(0); - usb_copy = get_irom_func(USB_INDEX); - usb_copy(); - config_branch_prediction(is_cr_z_set); - break; - default: - break; - } -} - -void board_init_f(unsigned long bootflag) -{ - __attribute__((noreturn)) void (*uboot)(void); - copy_uboot_to_ram(); - - /* Jump to U-Boot image */ - uboot = (void *)CONFIG_SYS_TEXT_BASE; - (*uboot)(); - /* Never returns Here */ -} - -/* Place Holders */ -void board_init_r(gd_t *id, ulong dest_addr) -{ - /* Function attribute is no-return */ - /* This Function never executes */ - while (1) - ; -} -void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) {} diff --git a/board/samsung/smdkv310/Makefile b/board/samsung/smdkv310/Makefile index 56e0c16..c4cd0a3 100644 --- a/board/samsung/smdkv310/Makefile +++ b/board/samsung/smdkv310/Makefile @@ -24,18 +24,12 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -SOBJS := mem_setup.o -SOBJS += lowlevel_init.o ifndef CONFIG_SPL_BUILD COBJS += smdkv310.o endif -ifdef CONFIG_SPL_BUILD -COBJS += mmc_boot.o -endif - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) ALL := $(obj).depend $(LIB) diff --git a/board/samsung/smdkv310/lowlevel_init.S b/board/samsung/smdkv310/lowlevel_init.S deleted file mode 100644 index 31e0e2e..0000000 --- a/board/samsung/smdkv310/lowlevel_init.S +++ /dev/null @@ -1,414 +0,0 @@ -/* - * Lowlevel setup for SMDKV310 board based on EXYNOS4210 - * - * Copyright (C) 2011 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> -#include <asm/arch/cpu.h> - -/* - * Register usages: - * - * r5 has zero always - * r7 has GPIO part1 base 0x11400000 - * r6 has GPIO part2 base 0x11000000 - */ - -#define MEM_DLLl_ON - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE - - .globl lowlevel_init -lowlevel_init: - push {lr} - - /* r5 has always zero */ - mov r5, #0 - ldr r7, =EXYNOS4_GPIO_PART1_BASE - ldr r6, =EXYNOS4_GPIO_PART2_BASE - - /* check reset status */ - ldr r0, =(EXYNOS4_POWER_BASE + 0x81C) @ INFORM7 - ldr r1, [r0] - - /* AFTR wakeup reset */ - ldr r2, =S5P_CHECK_DIDLE - cmp r1, r2 - beq exit_wakeup - - /* Sleep wakeup reset */ - ldr r2, =S5P_CHECK_SLEEP - cmp r1, r2 - beq wakeup_reset - - /* - * If U-boot is already running in ram, no need to relocate U-Boot. - * Memory controller must be configured before relocating U-Boot - * in ram. - */ - ldr r0, =0x00ffffff /* r0 <- Mask Bits*/ - bic r1, pc, r0 /* pc <- current addr of code */ - /* r1 <- unmasked bits of pc */ - - ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */ - bic r2, r2, r0 /* r2 <- unmasked bits of r2*/ - cmp r1, r2 /* compare r1, r2 */ - beq 1f /* r0 == r1 then skip sdram init */ - - /* init system clock */ - bl system_clock_init - - /* Memory initialize */ - bl mem_ctrl_asm_init - -1: - /* for UART */ - bl uart_asm_init - bl arch_cpu_init - bl tzpc_init - pop {pc} - -wakeup_reset: - bl system_clock_init - bl mem_ctrl_asm_init - bl arch_cpu_init - bl tzpc_init - -exit_wakeup: - /* Load return address and jump to kernel */ - ldr r0, =(EXYNOS4_POWER_BASE + 0x800) @ INFORM0 - - /* r1 = physical address of exynos4210_cpu_resume function */ - ldr r1, [r0] - - /* Jump to kernel*/ - mov pc, r1 - nop - nop - -/* - * system_clock_init: Initialize core clock and bus clock. - * void system_clock_init(void) - */ -system_clock_init: - push {lr} - ldr r0, =EXYNOS4_CLOCK_BASE - - /* APLL(1), MPLL(1), CORE(0), HPM(0) */ - ldr r1, =0x0101 - ldr r2, =0x14200 @CLK_SRC_CPU - str r1, [r0, r2] - - /* wait ?us */ - mov r1, #0x10000 -2: subs r1, r1, #1 - bne 2b - - ldr r1, =0x00 - ldr r2, =0x0C210 @CLK_SRC_TOP0 - str r1, [r0, r2] - - ldr r1, =0x00 - ldr r2, =0x0C214 @CLK_SRC_TOP1_OFFSET - str r1, [r0, r2] - - /* DMC */ - ldr r1, =0x00 - ldr r2, =0x10200 @CLK_SRC_DMC_OFFSET - str r1, [r0, r2] - - /*CLK_SRC_LEFTBUS */ - ldr r1, =0x00 - ldr r2, =0x04200 @CLK_SRC_LEFTBUS_OFFSET - str r1, [r0, r2] - - /*CLK_SRC_RIGHTBUS */ - ldr r1, =0x00 - ldr r2, =0x08200 @CLK_SRC_RIGHTBUS_OFFSET - str r1, [r0, r2] - - /* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */ - ldr r1, =0x066666 - ldr r2, =0x0C240 @ CLK_SRC_FSYS - str r1, [r0, r2] - - /* UART[0:4], PWM: SCLKMPLL(6) */ - ldr r1, =0x06666666 - ldr r2, =0x0C250 @CLK_SRC_PERIL0_OFFSET - str r1, [r0, r2] - - /* wait ?us */ - mov r1, #0x10000 -3: subs r1, r1, #1 - bne 3b - - /* - * CLK_DIV_CPU0: - * - * PCLK_DBG_RATIO[20] 0x1 - * ATB_RATIO[16] 0x3 - * PERIPH_RATIO[12] 0x3 - * COREM1_RATIO[8] 0x7 - * COREM0_RATIO[4] 0x3 - */ - ldr r1, =0x0133730 - ldr r2, =0x14500 @CLK_DIV_CPU0_OFFSET - str r1, [r0, r2] - - /* CLK_DIV_CPU1: COPY_RATIO [0] 0x3 */ - ldr r1, =0x03 - ldr r2, =0x14504 @CLK_DIV_CPU1_OFFSET - str r1, [r0, r2] - - /* - * CLK_DIV_DMC0: - * - * CORE_TIMERS_RATIO[28] 0x1 - * COPY2_RATIO[24] 0x3 - * DMCP_RATIO[20] 0x1 - * DMCD_RATIO[16] 0x1 - * DMC_RATIO[12] 0x1 - * DPHY_RATIO[8] 0x1 - * ACP_PCLK_RATIO[4] 0x1 - * ACP_RATIO[0] 0x3 - */ - ldr r1, =0x13111113 - ldr r2, =0x010500 @CLK_DIV_DMC0_OFFSET - str r1, [r0, r2] - - /* - * CLK_DIV_DMC1: - * - * DPM_RATIO[24] 0x1 - * DVSEM_RATIO[16] 0x1 - * PWI_RATIO[8] 0x1 - */ - ldr r1, =0x01010100 - ldr r2, =0x010504 @CLK_DIV_DMC1_OFFSET - str r1, [r0, r2] - - /* - * CLK_DIV_LEFRBUS: - * - * GPL_RATIO[4] 0x1 - * GDL_RATIO[0] 0x3 - */ - ldr r1, =0x013 - ldr r2, =0x04500 @CLK_DIV_LEFTBUS_OFFSET - str r1, [r0, r2] - - /* - * CLK_DIV_RIGHTBUS: - * - * GPR_RATIO[4] 0x1 - * GDR_RATIO[0] 0x3 - */ - ldr r1, =0x013 - ldr r2, =0x08500 @CLK_DIV_RIGHTBUS_OFFSET - str r1, [r0, r2] - - /* - * CLK_DIV_TOP: - * - * ONENAND_RATIO[16] 0x0 - * ACLK_133_RATIO[12] 0x5 - * ACLK_160_RATIO[8] 0x4 - * ACLK_100_RATIO[4] 0x7 - * ACLK_200_RATIO[0] 0x3 - */ - ldr r1, =0x05473 - ldr r2, =0x0C510 @CLK_DIV_TOP_OFFSET - str r1, [r0, r2] - - /* MMC[0:1] */ - ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */ - ldr r2, =0x0C544 @ CLK_DIV_FSYS1 - str r1, [r0, r2] - - /* MMC[2:3] */ - ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */ - ldr r2, =0x0C548 @ CLK_DIV_FSYS2 - str r1, [r0, r2] - - /* MMC4 */ - ldr r1, =0x000f /* 800(MPLL) / (15 + 1) */ - ldr r2, =0x0C54C @ CLK_DIV_FSYS3 - str r1, [r0, r2] - - /* wait ?us */ - mov r1, #0x10000 -4: subs r1, r1, #1 - bne 4b - - /* - * CLK_DIV_PERIL0: - * - * UART5_RATIO[20] 8 - * UART4_RATIO[16] 8 - * UART3_RATIO[12] 8 - * UART2_RATIO[8] 8 - * UART1_RATIO[4] 8 - * UART0_RATIO[0] 8 - */ - ldr r1, =0x774777 - ldr r2, =0x0C550 @CLK_DIV_PERIL0_OFFSET - str r1, [r0, r2] - - /* SLIMBUS: ???, PWM */ - ldr r1, =0x8 - ldr r2, =0x0C55C @ CLK_DIV_PERIL3 - str r1, [r0, r2] - - /* Set PLL locktime */ - ldr r1, =0x01C20 - ldr r2, =0x014000 @APLL_LOCK_OFFSET - str r1, [r0, r2] - ldr r1, =0x01C20 - ldr r2, =0x014008 @MPLL_LOCK_OFFSET - str r1, [r0, r2] - ldr r1, =0x01C20 - ldr r2, =0x0C010 @EPLL_LOCK_OFFSET - str r1, [r0, r2] - ldr r1, =0x01C20 - ldr r2, =0x0C020 @VPLL_LOCK_OFFSET - str r1, [r0, r2] - - /* - * APLL_CON1: - * - * APLL_AFC_ENB[31] 0x1 - * APLL_AFC[0] 0xC - */ - ldr r1, =0x8000000C - ldr r2, =0x014104 @APLL_CON1_OFFSET - str r1, [r0, r2] - - /* - * APLL_CON0: - * - * APLL_MDIV[16] 0xFA - * APLL_PDIV[8] 0x6 - * APLL_SDIV[0] 0x1 - */ - ldr r1, =0x80FA0601 - ldr r2, =0x014100 @APLL_CON0_OFFSET - str r1, [r0, r2] - - /* - * MPLL_CON1: - * - * MPLL_AFC_ENB[31] 0x1 - * MPLL_AFC[0] 0x1C - */ - ldr r1, =0x0000001C - ldr r2, =0x01410C @MPLL_CON1_OFFSET - str r1, [r0, r2] - - /* - * MPLL_CON0: - * - * MPLL_MDIV[16] 0xC8 - * MPLL_PDIV[8] 0x6 - * MPLL_SDIV[0] 0x1 - */ - ldr r1, =0x80C80601 - ldr r2, =0x014108 @MPLL_CON0_OFFSET - str r1, [r0, r2] - - /* EPLL */ - ldr r1, =0x0 - ldr r2, =0x0C114 @EPLL_CON1_OFFSET - str r1, [r0, r2] - - /* - * EPLL_CON0: - * - * EPLL_MDIV[16] 0x30 - * EPLL_PDIV[8] 0x3 - * EPLL_SDIV[0] 0x2 - */ - ldr r1, =0x80300302 - ldr r2, =0x0C110 @EPLL_CON0_OFFSET - str r1, [r0, r2] - - /* - * VPLL_CON1: - * - * VPLL_MRR[24] 0x11 - * VPLL_MFR[16] 0x0 - * VPLL_K[0] 0x400 - */ - ldr r1, =0x11000400 - ldr r2, =0x0C124 @VPLL_CON1_OFFSET - str r1, [r0, r2] - - /* - * VPLL_CON0: - * - * VPLL_MDIV[16] 0x35 - * VPLL_PDIV[8] 0x3 - * VPLL_SDIV[0] 0x2 - */ - ldr r1, =0x80350302 - ldr r2, =0x0C120 @VPLL_CON0_OFFSET - str r1, [r0, r2] - - /* wait ?us */ - mov r1, #0x30000 -3: subs r1, r1, #1 - bne 3b - - pop {pc} -/* - * uart_asm_init: Initialize UART in asm mode, 115200bps fixed. - * void uart_asm_init(void) - */ - .globl uart_asm_init -uart_asm_init: - - /* setup UART0-UART3 GPIOs (part1) */ - mov r0, r7 - ldr r1, =0x22222222 - str r1, [r0, #0x00] @ EXYNOS4_GPIO_A0_OFFSET - ldr r1, =0x00222222 - str r1, [r0, #0x20] @ EXYNOS4_GPIO_A1_OFFSET - - ldr r0, =EXYNOS4_UART_BASE - add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET - - ldr r1, =0x3C5 - str r1, [r0, #0x4] - ldr r1, =0x111 - str r1, [r0, #0x8] - ldr r1, =0x3 - str r1, [r0, #0x0] - ldr r1, =0x35 - str r1, [r0, #0x28] - ldr r1, =0x4 - str r1, [r0, #0x2c] - - mov pc, lr - nop - nop - nop diff --git a/board/samsung/smdkv310/mem_setup.S b/board/samsung/smdkv310/mem_setup.S deleted file mode 100644 index d3b6265..0000000 --- a/board/samsung/smdkv310/mem_setup.S +++ /dev/null @@ -1,365 +0,0 @@ -/* - * Memory setup for SMDKV310 board based on EXYNOS4210 - * - * Copyright (C) 2011 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> - -#define SET_MIU - -#define MEM_DLL - -#ifdef CONFIG_CLK_800_330_165 -#define DRAM_CLK_330 -#endif -#ifdef CONFIG_CLK_1000_200_200 -#define DRAM_CLK_200 -#endif -#ifdef CONFIG_CLK_1000_330_165 -#define DRAM_CLK_330 -#endif -#ifdef CONFIG_CLK_1000_400_200 -#define DRAM_CLK_400 -#endif - - .globl mem_ctrl_asm_init -mem_ctrl_asm_init: - - /* - * Async bridge configuration at CPU_core: - * 1: half_sync - * 0: full_sync - */ - ldr r0, =0x10010350 - mov r1, #1 - str r1, [r0] - -#ifdef SET_MIU - ldr r0, =EXYNOS4_MIU_BASE @0x10600000 -#ifdef CONFIG_MIU_1BIT_INTERLEAVED - ldr r1, =0x0000000c - str r1, [r0, #0x400] @MIU_INTLV_CONFIG - ldr r1, =0x40000000 - str r1, [r0, #0x808] @MIU_INTLV_START_ADDR - ldr r1, =0xbfffffff - str r1, [r0, #0x810] @MIU_INTLV_END_ADDR - ldr r1, =0x00000001 - str r1, [r0, #0x800] @MIU_MAPPING_UPDATE -#endif -#ifdef CONFIG_MIU_2BIT_INTERLEAVED - ldr r1, =0x2000150c - str r1, [r0, #0x400] @MIU_INTLV_CONFIG - ldr r1, =0x40000000 - str r1, [r0, #0x808] @MIU_INTLV_START_ADDR - ldr r1, =0xbfffffff - str r1, [r0, #0x810] @MIU_INTLV_END_ADDR - ldr r1, =0x00000001 - str r1, [r0, #0x800] @MIU_MAPPING_UPDATE -#endif -#ifdef CONFIG_MIU_LINEAR - ldr r1, =0x40000000 - str r1, [r0, #0x818] @MIU_SINGLE_MAPPING0_START_ADDR - ldr r1, =0x7fffffff - str r1, [r0, #0x820] @MIU_SINGLE_MAPPING0_END_ADDR - ldr r1, =0x80000000 - str r1, [r0, #0x828] @MIU_SINGLE_MAPPING1_START_ADDR - ldr r1, =0xbfffffff - str r1, [r0, #0x830] @MIU_SINGLE_MAPPING1_END_ADDR] - ldr r1, =0x00000006 - str r1, [r0, #0x800] @MIU_MAPPING_UPDATE -#endif -#endif - /* DREX0 */ - ldr r0, =EXYNOS4_DMC0_BASE @0x10400000 - - ldr r1, =0xe0000086 - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - - ldr r1, =0xE3855703 - str r1, [r0, #0x44] @DMC_PHYZQCONTROL - - mov r2, #0x100000 -1: subs r2, r2, #1 - bne 1b - - ldr r1, =0xe000008e - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - ldr r1, =0xe0000086 - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - - ldr r1, =0x71101008 - str r1, [r0, #0x18] @DMC_PHYCONTROL0 - ldr r1, =0x7110100A - str r1, [r0, #0x18] @DMC_PHYCONTROL0 - ldr r1, =0xe0000086 - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - ldr r1, =0x7110100B - str r1, [r0, #0x18] @DMC_PHYCONTROL0 - - ldr r1, =0x00000000 - str r1, [r0, #0x20] @DMC_PHYCONTROL2 - - ldr r1, =0x0FFF301a - str r1, [r0, #0x00] @DMC_CONCONTROL - ldr r1, =0x00312640 - str r1, [r0, #0x04] @DMC_MEMCONTROL] - -#ifdef CONFIG_MIU_LINEAR - ldr r1, =0x40e01323 - str r1, [r0, #0x08] @DMC_MEMCONFIG0 - ldr r1, =0x60e01323 - str r1, [r0, #0x0C] @DMC_MEMCONFIG1 -#else /* @MIU_1BIT_INTERLEAVED | MIU_2BIT_INTERLEAVED */ - ldr r1, =0x20e01323 - str r1, [r0, #0x08] @DMC_MEMCONFIG0 - ldr r1, =0x40e01323 - str r1, [r0, #0x0C] @DMC_MEMCONFIG1 -#endif - - ldr r1, =0xff000000 - str r1, [r0, #0x14] @DMC_PRECHCONFIG - - ldr r1, =0x000000BC - str r1, [r0, #0x30] @DMC_TIMINGAREF - -#ifdef DRAM_CLK_330 - ldr r1, =0x3545548d - str r1, [r0, #0x34] @DMC_TIMINGROW - ldr r1, =0x45430506 - str r1, [r0, #0x38] @DMC_TIMINGDATA - ldr r1, =0x4439033c - str r1, [r0, #0x3C] @DMC_TIMINGPOWER -#endif -#ifdef DRAM_CLK_400 - ldr r1, =0x4046654f - str r1, [r0, #0x34] @DMC_TIMINGROW - ldr r1, =0x56500506 - str r1, [r0, #0x38] @DMC_TIMINGDATA - ldr r1, =0x5444033d - str r1, [r0, #0x3C] @DMC_TIMINGPOWER -#endif - ldr r1, =0x07000000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -2: subs r2, r2, #1 - bne 2b - - ldr r1, =0x00020000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00030000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00010002 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00000328 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -3: subs r2, r2, #1 - bne 3b - - ldr r1, =0x0a000000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -4: subs r2, r2, #1 - bne 4b - - ldr r1, =0x07100000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -5: subs r2, r2, #1 - bne 5b - - ldr r1, =0x00120000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00130000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00110002 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00100328 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -6: subs r2, r2, #1 - bne 6b - - ldr r1, =0x0a100000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -7: subs r2, r2, #1 - bne 7b - - ldr r1, =0xe000008e - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - ldr r1, =0xe0000086 - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - - mov r2, #0x100000 -8: subs r2, r2, #1 - bne 8b - - /* DREX1 */ - ldr r0, =EXYNOS4_DMC1_BASE @0x10410000 - - ldr r1, =0xe0000086 - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - - ldr r1, =0xE3855703 - str r1, [r0, #0x44] @DMC_PHYZQCONTROL - - mov r2, #0x100000 -1: subs r2, r2, #1 - bne 1b - - ldr r1, =0xe000008e - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - ldr r1, =0xe0000086 - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - - ldr r1, =0x71101008 - str r1, [r0, #0x18] @DMC_PHYCONTROL0 - ldr r1, =0x7110100A - str r1, [r0, #0x18] @DMC_PHYCONTROL0 - ldr r1, =0xe0000086 - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - ldr r1, =0x7110100B - str r1, [r0, #0x18] @DMC_PHYCONTROL0 - - ldr r1, =0x00000000 - str r1, [r0, #0x20] @DMC_PHYCONTROL2 - - ldr r1, =0x0FFF301a - str r1, [r0, #0x00] @DMC_CONCONTROL - ldr r1, =0x00312640 - str r1, [r0, #0x04] @DMC_MEMCONTROL] - -#ifdef CONFIG_MIU_LINEAR - ldr r1, =0x40e01323 - str r1, [r0, #0x08] @DMC_MEMCONFIG0 - ldr r1, =0x60e01323 - str r1, [r0, #0x0C] @DMC_MEMCONFIG1 -#else /* @MIU_1BIT_INTERLEAVED | MIU_2BIT_INTERLEAVED */ - ldr r1, =0x20e01323 - str r1, [r0, #0x08] @DMC_MEMCONFIG0 - ldr r1, =0x40e01323 - str r1, [r0, #0x0C] @DMC_MEMCONFIG1 -#endif - - ldr r1, =0xff000000 - str r1, [r0, #0x14] @DMC_PRECHCONFIG - - ldr r1, =0x000000BC - str r1, [r0, #0x30] @DMC_TIMINGAREF - -#ifdef DRAM_CLK_330 - ldr r1, =0x3545548d - str r1, [r0, #0x34] @DMC_TIMINGROW - ldr r1, =0x45430506 - str r1, [r0, #0x38] @DMC_TIMINGDATA - ldr r1, =0x4439033c - str r1, [r0, #0x3C] @DMC_TIMINGPOWER -#endif -#ifdef DRAM_CLK_400 - ldr r1, =0x4046654f - str r1, [r0, #0x34] @DMC_TIMINGROW - ldr r1, =0x56500506 - str r1, [r0, #0x38] @DMC_TIMINGDATA - ldr r1, =0x5444033d - str r1, [r0, #0x3C] @DMC_TIMINGPOWER -#endif - - ldr r1, =0x07000000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -2: subs r2, r2, #1 - bne 2b - - ldr r1, =0x00020000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00030000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00010002 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00000328 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -3: subs r2, r2, #1 - bne 3b - - ldr r1, =0x0a000000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -4: subs r2, r2, #1 - bne 4b - - ldr r1, =0x07100000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -5: subs r2, r2, #1 - bne 5b - - ldr r1, =0x00120000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00130000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00110002 - str r1, [r0, #0x10] @DMC_DIRECTCMD - ldr r1, =0x00100328 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -6: subs r2, r2, #1 - bne 6b - - ldr r1, =0x0a100000 - str r1, [r0, #0x10] @DMC_DIRECTCMD - - mov r2, #0x100000 -7: subs r2, r2, #1 - bne 7b - - ldr r1, =0xe000008e - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - ldr r1, =0xe0000086 - str r1, [r0, #0x1C] @DMC_PHYCONTROL1 - - mov r2, #0x100000 -8: subs r2, r2, #1 - bne 8b - - /* turn on DREX0, DREX1 */ - ldr r0, =0x10400000 @APB_DMC_0_BASE - ldr r1, =0x0FFF303a - str r1, [r0, #0x00] @DMC_CONCONTROL - - ldr r0, =0x10410000 @APB_DMC_1_BASE - ldr r1, =0x0FFF303a - str r1, [r0, #0x00] @DMC_CONCONTROL - - mov pc, lr diff --git a/board/samsung/smdkv310/mmc_boot.c b/board/samsung/smdkv310/mmc_boot.c deleted file mode 100644 index d3fc18d..0000000 --- a/board/samsung/smdkv310/mmc_boot.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * Copyright (C) 2011 Samsung Electronics - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include<common.h> -#include<config.h> - -/* -* Copy U-boot from mmc to RAM: -* COPY_BL2_FNPTR_ADDR: Address in iRAM, which Contains -* API (Data transfer from mmc to ram) -*/ -void copy_uboot_to_ram(void) -{ - u32 (*copy_bl2)(u32, u32, u32) = (void *)COPY_BL2_FNPTR_ADDR; - - copy_bl2(BL2_START_OFFSET, BL2_SIZE_BLOC_COUNT, CONFIG_SYS_TEXT_BASE); -} - -void board_init_f(unsigned long bootflag) -{ - __attribute__((noreturn)) void (*uboot)(void); - copy_uboot_to_ram(); - - /* Jump to U-Boot image */ - uboot = (void *)CONFIG_SYS_TEXT_BASE; - (*uboot)(); - /* Never returns Here */ -} - -/* Place Holders */ -void board_init_r(gd_t *id, ulong dest_addr) -{ - /*Function attribute is no-return*/ - /*This Function never executes*/ - while (1) - ; -} - -void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3) -{ -} |