diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/freescale/ls2085a/Makefile | 8 | ||||
| -rw-r--r-- | board/freescale/ls2085a/README | 16 | ||||
| -rw-r--r-- | board/freescale/ls2085a/ddr.c | 175 | ||||
| -rw-r--r-- | board/freescale/ls2085a/ddr.h | 57 | ||||
| -rw-r--r-- | board/freescale/ls2085a/ls2085a.c | 100 |
5 files changed, 356 insertions, 0 deletions
diff --git a/board/freescale/ls2085a/Makefile b/board/freescale/ls2085a/Makefile new file mode 100644 index 0000000..701b35c --- /dev/null +++ b/board/freescale/ls2085a/Makefile @@ -0,0 +1,8 @@ +# +# Copyright 2014 Freescale Semiconductor +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += ls2085a.o +obj-y += ddr.o diff --git a/board/freescale/ls2085a/README b/board/freescale/ls2085a/README new file mode 100644 index 0000000..b7023e1 --- /dev/null +++ b/board/freescale/ls2085a/README @@ -0,0 +1,16 @@ +Freescale ls2085a_emu + +This is a emulator target with limited peripherals. + +Memory map from core's view + +0x00_0000_0000 .. 0x00_000F_FFFF Boot Rom +0x00_0100_0000 .. 0x00_0FFF_FFFF CCSR +0x00_1800_0000 .. 0x00_181F_FFFF OCRAM +0x00_3000_0000 .. 0x00_3FFF_FFFF IFC region #1 +0x00_8000_0000 .. 0x00_FFFF_FFFF DDR region #1 +0x05_1000_0000 .. 0x05_FFFF_FFFF IFC region #2 +0x80_8000_0000 .. 0xFF_FFFF_FFFF DDR region #2 + +Other addresses are either reserved, or not used directly by u-boot. +This list should be updated when more addresses are used. diff --git a/board/freescale/ls2085a/ddr.c b/board/freescale/ls2085a/ddr.c new file mode 100644 index 0000000..257bc16 --- /dev/null +++ b/board/freescale/ls2085a/ddr.c @@ -0,0 +1,175 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include <common.h> +#include <fsl_ddr_sdram.h> +#include <fsl_ddr_dimm_params.h> +#include "ddr.h" + +DECLARE_GLOBAL_DATA_PTR; + +void fsl_ddr_board_options(memctl_options_t *popts, + dimm_params_t *pdimm, + unsigned int ctrl_num) +{ + const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; + ulong ddr_freq; + + if (ctrl_num > 3) { + printf("Not supported controller number %d\n", ctrl_num); + return; + } + if (!pdimm->n_ranks) + return; + + /* + * we use identical timing for all slots. If needed, change the code + * to pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num]; + */ + if (popts->registered_dimm_en) + pbsp = rdimms[0]; + else + pbsp = udimms[0]; + + + /* Get clk_adjust, wrlvl_start, wrlvl_ctl, according to the board ddr + * freqency and n_banks specified in board_specific_parameters table. + */ + ddr_freq = get_ddr_freq(0) / 1000000; + while (pbsp->datarate_mhz_high) { + if (pbsp->n_ranks == pdimm->n_ranks && + (pdimm->rank_density >> 30) >= pbsp->rank_gb) { + if (ddr_freq <= pbsp->datarate_mhz_high) { + popts->clk_adjust = pbsp->clk_adjust; + popts->wrlvl_start = pbsp->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + goto found; + } + pbsp_highest = pbsp; + } + pbsp++; + } + + if (pbsp_highest) { + printf("Error: board specific timing not found for data rate %lu MT/s\n" + "Trying to use the highest speed (%u) parameters\n", + ddr_freq, pbsp_highest->datarate_mhz_high); + popts->clk_adjust = pbsp_highest->clk_adjust; + popts->wrlvl_start = pbsp_highest->wrlvl_start; + popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2; + popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3; + } else { + panic("DIMM is not supported by this board"); + } +found: + debug("Found timing match: n_ranks %d, data rate %d, rank_gb %d\n" + "\tclk_adjust %d, wrlvl_start %d, wrlvl_ctrl_2 0x%x, wrlvl_ctrl_3 0x%x\n", + pbsp->n_ranks, pbsp->datarate_mhz_high, pbsp->rank_gb, + pbsp->clk_adjust, pbsp->wrlvl_start, pbsp->wrlvl_ctl_2, + pbsp->wrlvl_ctl_3); + + /* + * Factors to consider for half-strength driver enable: + * - number of DIMMs installed + */ + popts->half_strength_driver_enable = 1; + /* + * Write leveling override + */ + popts->wrlvl_override = 1; + popts->wrlvl_sample = 0xf; + + /* + * Rtt and Rtt_WR override + */ + popts->rtt_override = 0; + + /* Enable ZQ calibration */ + popts->zq_en = 1; + +#ifdef CONFIG_SYS_FSL_DDR4 + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_80ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_80ohm) | + DDR_CDR2_VREF_OVRD(70); /* Vref = 70% */ +#else + /* DHC_EN =1, ODT = 75 Ohm */ + popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm); + popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm); +#endif +} + +#ifdef CONFIG_SYS_DDR_RAW_TIMING +dimm_params_t ddr_raw_timing = { + .n_ranks = 2, + .rank_density = 1073741824u, + .capacity = 2147483648, + .primary_sdram_width = 64, + .ec_sdram_width = 0, + .registered_dimm = 0, + .mirrored_dimm = 0, + .n_row_addr = 14, + .n_col_addr = 10, + .n_banks_per_sdram_device = 8, + .edc_config = 0, + .burst_lengths_bitmask = 0x0c, + + .tckmin_x_ps = 937, + .caslat_x = 0x6FC << 4, /* 14,13,11,10,9,8,7,6 */ + .taa_ps = 13090, + .twr_ps = 15000, + .trcd_ps = 13090, + .trrd_ps = 5000, + .trp_ps = 13090, + .tras_ps = 33000, + .trc_ps = 46090, + .trfc_ps = 160000, + .twtr_ps = 7500, + .trtp_ps = 7500, + .refresh_rate_ps = 7800000, + .tfaw_ps = 25000, +}; + +int fsl_ddr_get_dimm_params(dimm_params_t *pdimm, + unsigned int controller_number, + unsigned int dimm_number) +{ + const char dimm_model[] = "Fixed DDR on board"; + + if (((controller_number == 0) && (dimm_number == 0)) || + ((controller_number == 1) && (dimm_number == 0))) { + memcpy(pdimm, &ddr_raw_timing, sizeof(dimm_params_t)); + memset(pdimm->mpart, 0, sizeof(pdimm->mpart)); + memcpy(pdimm->mpart, dimm_model, sizeof(dimm_model) - 1); + } + + return 0; +} +#endif +phys_size_t initdram(int board_type) +{ + phys_size_t dram_size; + + puts("Initializing DDR...."); + + puts("using SPD\n"); + dram_size = fsl_ddr_sdram(); + + return dram_size; +} + +void dram_init_banksize(void) +{ + gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE; + if (gd->ram_size > CONFIG_SYS_LS2_DDR_BLOCK1_SIZE) { + gd->bd->bi_dram[0].size = CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; + gd->bd->bi_dram[1].start = CONFIG_SYS_DDR_BLOCK2_BASE; + gd->bd->bi_dram[1].size = gd->ram_size - + CONFIG_SYS_LS2_DDR_BLOCK1_SIZE; + } else { + gd->bd->bi_dram[0].size = gd->ram_size; + } +} diff --git a/board/freescale/ls2085a/ddr.h b/board/freescale/ls2085a/ddr.h new file mode 100644 index 0000000..77f6aaf --- /dev/null +++ b/board/freescale/ls2085a/ddr.h @@ -0,0 +1,57 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __DDR_H__ +#define __DDR_H__ +struct board_specific_parameters { + u32 n_ranks; + u32 datarate_mhz_high; + u32 rank_gb; + u32 clk_adjust; + u32 wrlvl_start; + u32 wrlvl_ctl_2; + u32 wrlvl_ctl_3; +}; + +/* + * These tables contain all valid speeds we want to override with board + * specific parameters. datarate_mhz_high values need to be in ascending order + * for each n_ranks group. + */ + +static const struct board_specific_parameters udimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 + */ + {2, 2140, 0, 4, 4, 0x0, 0x0}, + {1, 2140, 0, 4, 4, 0x0, 0x0}, + {} +}; + +static const struct board_specific_parameters rdimm0[] = { + /* + * memory controller 0 + * num| hi| rank| clk| wrlvl | wrlvl | wrlvl + * ranks| mhz| GB |adjst| start | ctl2 | ctl3 + */ + {4, 2140, 0, 5, 4, 0x0, 0x0}, + {2, 2140, 0, 5, 4, 0x0, 0x0}, + {1, 2140, 0, 4, 4, 0x0, 0x0}, + {} +}; + +static const struct board_specific_parameters *udimms[] = { + udimm0, +}; + +static const struct board_specific_parameters *rdimms[] = { + rdimm0, +}; + + +#endif diff --git a/board/freescale/ls2085a/ls2085a.c b/board/freescale/ls2085a/ls2085a.c new file mode 100644 index 0000000..a18db1d --- /dev/null +++ b/board/freescale/ls2085a/ls2085a.c @@ -0,0 +1,100 @@ +/* + * Copyright 2014 Freescale Semiconductor + * + * SPDX-License-Identifier: GPL-2.0+ + */ +#include <common.h> +#include <malloc.h> +#include <errno.h> +#include <netdev.h> +#include <fsl_ifc.h> +#include <fsl_ddr.h> +#include <asm/io.h> +#include <fdt_support.h> +#include <libfdt.h> +#include <fsl_mc.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_init(void) +{ + init_final_memctl_regs(); + return 0; +} + +int board_early_init_f(void) +{ + init_early_memctl_regs(); /* tighten IFC timing */ + + return 0; +} + +int dram_init(void) +{ + printf("DRAM: "); + gd->ram_size = initdram(0); + + return 0; +} + +int timer_init(void) +{ + u32 __iomem *cntcr = (u32 *)CONFIG_SYS_FSL_TIMER_ADDR; + u32 __iomem *cltbenr = (u32 *)CONFIG_SYS_FSL_PMU_CLTBENR; + + out_le32(cltbenr, 0x1); /* enable cluster0 timebase */ + out_le32(cntcr, 0x1); /* enable clock for timer */ + + return 0; +} + +/* + * Board specific reset that is system reset. + */ +void reset_cpu(ulong addr) +{ +} + +int board_eth_init(bd_t *bis) +{ + int error = 0; + +#ifdef CONFIG_SMC91111 + error = smc91111_initialize(0, CONFIG_SMC91111_BASE); +#endif + +#ifdef CONFIG_FSL_MC_ENET + error = cpu_eth_init(bis); +#endif + return error; +} + +#ifdef CONFIG_FSL_MC_ENET +void fdt_fixup_board_enet(void *fdt) +{ + int offset; + + offset = fdt_path_offset(fdt, "/fsl,dprc@0"); + if (get_mc_boot_status() == 0) + fdt_status_okay(fdt, offset); + else + fdt_status_fail(fdt, offset); +} +#endif + +#ifdef CONFIG_OF_BOARD_SETUP +void ft_board_setup(void *blob, bd_t *bd) +{ + phys_addr_t base; + phys_size_t size; + + /* limit the memory size to bank 1 until Linux can handle 40-bit PA */ + base = getenv_bootm_low(); + size = getenv_bootm_size(); + fdt_fixup_memory(blob, (u64)base, (u64)size); + +#ifdef CONFIG_FSL_MC_ENET + fdt_fixup_board_enet(blob); +#endif +} +#endif |