diff options
Diffstat (limited to 'board')
86 files changed, 1069 insertions, 3857 deletions
diff --git a/board/BuS/eb_cpux9k2/cpux9k2.c b/board/BuS/eb_cpux9k2/cpux9k2.c index 776226f..e98244b 100644 --- a/board/BuS/eb_cpux9k2/cpux9k2.c +++ b/board/BuS/eb_cpux9k2/cpux9k2.c @@ -267,9 +267,9 @@ int drv_video_init(void) display_height = 256; printf("%ld x %ld pixel matrix\n", display_width, display_height); - /* RWH = 7 | RWS =7 | TDF = 15 | NWS = 0x7F */ - csr = AT91_SMC_CSR_RWHOLD(7) | AT91_SMC_CSR_RWSETUP(7) | - AT91_SMC_CSR_TDF(15) | AT91_SMC_CSR_NWS(127) | + /* RWH = 2 | RWS =2 | TDF = 4 | NWS = 0x6 */ + csr = AT91_SMC_CSR_RWHOLD(2) | AT91_SMC_CSR_RWSETUP(2) | + AT91_SMC_CSR_TDF(4) | AT91_SMC_CSR_NWS(6) | AT91_SMC_CSR_ACSS_STANDARD | AT91_SMC_CSR_DBW_16 | AT91_SMC_CSR_BAT_16 | AT91_SMC_CSR_WSEN; writel(csr, &mc->smc.csr[2]); diff --git a/board/Marvell/sheevaplug/kwbimage.cfg b/board/Marvell/sheevaplug/kwbimage.cfg index 3b9c53f..55be3a3 100644 --- a/board/Marvell/sheevaplug/kwbimage.cfg +++ b/board/Marvell/sheevaplug/kwbimage.cfg @@ -21,8 +21,8 @@ # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, # MA 02110-1301 USA # -# Refer docs/README.kwimage for more details about how-to configure -# and create kirkwood boot image +# Refer to doc/README.kwbimage for more details about how-to +# configure and create kirkwood boot images. # # Boot Media configurations diff --git a/board/apollon/apollon.c b/board/apollon/apollon.c deleted file mode 100644 index 76626f0..0000000 --- a/board/apollon/apollon.c +++ /dev/null @@ -1,470 +0,0 @@ -/* - * (C) Copyright 2005-2007 - * Samsung Electronics. - * Kyungmin Park <kyungmin.park@samsung.com> - * - * Derived from omap2420 - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <netdev.h> -#include <asm/arch/omap2420.h> -#include <asm/io.h> -#include <asm/arch/bits.h> -#include <asm/arch/mux.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/sys_info.h> -#include <asm/arch/mem.h> -#include <asm/mach-types.h> - -void wait_for_command_complete(unsigned int wd_base); - -DECLARE_GLOBAL_DATA_PTR; - -#define write_config_reg(reg, value) \ -do { \ - writeb(value, reg); \ -} while (0) - -#define mask_config_reg(reg, mask) \ -do { \ - char value = readb(reg) & ~(mask); \ - writeb(value, reg); \ -} while (0) - -/******************************************************* - * Routine: delay - * Description: spinning delay to use before udelay works - ******************************************************/ -static inline void delay(unsigned long loops) -{ - __asm__("1:\n" "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0"(loops)); -} - -/***************************************** - * Routine: board_init - * Description: Early hardware init. - *****************************************/ -int board_init(void) -{ - gpmc_init(); /* in SRAM or SDRM, finish GPMC */ - - gd->bd->bi_arch_number = 919; - /* adress of boot parameters */ - gd->bd->bi_boot_params = (OMAP2420_SDRC_CS0 + 0x100); - - return 0; -} - -/********************************************************** - * Routine: s_init - * Description: Does early system init of muxing and clocks. - * - Called path is with sram stack. - **********************************************************/ -void s_init(void) -{ - watchdog_init(); - set_muxconf_regs(); - delay(100); - - peripheral_enable(); - icache_enable(); -} - -/******************************************************* - * Routine: misc_init_r - * Description: Init ethernet (done here so udelay works) - ********************************************************/ -int misc_init_r(void) -{ - return (0); -} - -/**************************************** - * Routine: watchdog_init - * Description: Shut down watch dogs - *****************************************/ -void watchdog_init(void) -{ - /* There are 4 watch dogs. 1 secure, and 3 general purpose. - * The ROM takes care of the secure one. Of the 3 GP ones, - * 1 can reset us directly, the other 2 only generate MPU interrupts. - */ - __raw_writel(WD_UNLOCK1, WD2_BASE + WSPR); - wait_for_command_complete(WD2_BASE); - __raw_writel(WD_UNLOCK2, WD2_BASE + WSPR); - -#define MPU_WD_CLOCKED 1 -#if MPU_WD_CLOCKED - /* value 0x10 stick on aptix, BIT4 polarity seems oppsite */ - __raw_writel(WD_UNLOCK1, WD3_BASE + WSPR); - wait_for_command_complete(WD3_BASE); - __raw_writel(WD_UNLOCK2, WD3_BASE + WSPR); - - __raw_writel(WD_UNLOCK1, WD4_BASE + WSPR); - wait_for_command_complete(WD4_BASE); - __raw_writel(WD_UNLOCK2, WD4_BASE + WSPR); -#endif -} - -/****************************************************** - * Routine: wait_for_command_complete - * Description: Wait for posting to finish on watchdog - ******************************************************/ -void wait_for_command_complete(unsigned int wd_base) -{ - int pending = 1; - do { - pending = __raw_readl(wd_base + WWPS); - } while (pending); -} - -/******************************************************************* - * Routine:board_eth_init - * Description: take the Ethernet controller out of reset and wait - * for the EEPROM load to complete. - ******************************************************************/ -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_LAN91C96 - int cnt = 20; - - __raw_writeb(0x03, OMAP2420_CTRL_BASE + 0x0f2); /*protect->gpio74 */ - - __raw_writew(0x0, LAN_RESET_REGISTER); - do { - __raw_writew(0x1, LAN_RESET_REGISTER); - udelay(100); - if (cnt == 0) - goto eth_reset_err_out; - --cnt; - } while (__raw_readw(LAN_RESET_REGISTER) != 0x1); - - cnt = 20; - - do { - __raw_writew(0x0, LAN_RESET_REGISTER); - udelay(100); - if (cnt == 0) - goto eth_reset_err_out; - --cnt; - } while (__raw_readw(LAN_RESET_REGISTER) != 0x0000); - udelay(1000); - - mask_config_reg(ETH_CONTROL_REG, 0x01); - udelay(1000); - rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); -eth_reset_err_out: -#endif - return rc; -} - -/********************************************** - * Routine: dram_init - * Description: sets uboots idea of sdram size - **********************************************/ -int dram_init(void) -{ - unsigned int size; - u32 mtype, btype; -#define NOT_EARLY 0 - - btype = get_board_type(); - mtype = get_mem_type(); - - display_board_info(btype); - - if ((mtype == DDR_COMBO) || (mtype == DDR_STACKED)) { - /* init other chip select */ - do_sdrc_init(SDRC_CS1_OSET, NOT_EARLY); - } - - size = get_sdr_cs_size(SDRC_CS0_OSET); - - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = size; -#if CONFIG_NR_DRAM_BANKS > 1 - size = get_sdr_cs_size(SDRC_CS1_OSET); - - gd->bd->bi_dram[1].start = gd->bd->bi_dram[0].start + - gd->bd->bi_dram[0].size; - gd->bd->bi_dram[1].size = size; -#endif - - return 0; -} - -/********************************************************** - * Routine: set_muxconf_regs - * Description: Setting up the configuration Mux registers - * specific to the hardware - *********************************************************/ -void set_muxconf_regs(void) -{ - muxSetupSDRC(); - muxSetupGPMC(); - muxSetupUsb0(); /* USB Device */ - muxSetupUsbHost(); /* USB Host */ - muxSetupUART1(); - muxSetupLCD(); - muxSetupMMCSD(); - muxSetupTouchScreen(); -} - -/***************************************************************** - * Routine: peripheral_enable - * Description: Enable the clks & power for perifs (GPT2, UART1,...) - ******************************************************************/ -void peripheral_enable(void) -{ - unsigned int v, if_clks = 0, func_clks = 0; - - /* Enable GP2 timer. */ - if_clks |= BIT4 | BIT3; - func_clks |= BIT4 | BIT3; - /* Sys_clk input OMAP2420_GPT2 */ - v = __raw_readl(CM_CLKSEL2_CORE) | 0x4 | 0x2; - __raw_writel(v, CM_CLKSEL2_CORE); - __raw_writel(0x1, CM_CLKSEL_WKUP); - -#ifdef CONFIG_SYS_NS16550 - /* Enable UART1 clock */ - func_clks |= BIT21; - if_clks |= BIT21; -#endif - /* Interface clocks on */ - v = __raw_readl(CM_ICLKEN1_CORE) | if_clks; - __raw_writel(v, CM_ICLKEN1_CORE); - /* Functional Clocks on */ - v = __raw_readl(CM_FCLKEN1_CORE) | func_clks; - __raw_writel(v, CM_FCLKEN1_CORE); - delay(1000); - -#ifndef KERNEL_UPDATED - { -#define V1 0xffffffff -#define V2 0x00000007 - - __raw_writel(V1, CM_FCLKEN1_CORE); - __raw_writel(V2, CM_FCLKEN2_CORE); - __raw_writel(V1, CM_ICLKEN1_CORE); - __raw_writel(V1, CM_ICLKEN2_CORE); - } -#endif -} - -/**************************************** - * Routine: muxSetupUsb0 (ostboot) - * Description: Setup usb muxing - *****************************************/ -void muxSetupUsb0(void) -{ - mask_config_reg(CONTROL_PADCONF_USB0_PUEN, 0x1f); - mask_config_reg(CONTROL_PADCONF_USB0_VP, 0x1f); - mask_config_reg(CONTROL_PADCONF_USB0_VM, 0x1f); - mask_config_reg(CONTROL_PADCONF_USB0_RCV, 0x1f); - mask_config_reg(CONTROL_PADCONF_USB0_TXEN, 0x1f); - mask_config_reg(CONTROL_PADCONF_USB0_SE0, 0x1f); - mask_config_reg(CONTROL_PADCONF_USB0_DAT, 0x1f); -} - -/**************************************** - * Routine: muxSetupUSBHost (ostboot) - * Description: Setup USB Host muxing - *****************************************/ -void muxSetupUsbHost(void) -{ - /* V19 */ - write_config_reg(CONTROL_PADCONF_USB1_RCV, 1); - /* W20 */ - write_config_reg(CONTROL_PADCONF_USB1_TXEN, 1); - /* N14 */ - write_config_reg(CONTROL_PADCONF_GPIO69, 3); - /* P15 */ - write_config_reg(CONTROL_PADCONF_GPIO70, 3); - /* L18 */ - write_config_reg(CONTROL_PADCONF_GPIO102, 3); - /* L19 */ - write_config_reg(CONTROL_PADCONF_GPIO103, 3); - /* K15 */ - write_config_reg(CONTROL_PADCONF_GPIO104, 3); - /* K14 */ - write_config_reg(CONTROL_PADCONF_GPIO105, 3); -} - -/**************************************** - * Routine: muxSetupUART1 (ostboot) - * Description: Set up uart1 muxing - *****************************************/ -void muxSetupUART1(void) -{ - /* UART1_CTS pin configuration, PIN = D21, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_UART1_CTS, 0); - /* UART1_RTS pin configuration, PIN = H21, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_UART1_RTS, 0); - /* UART1_TX pin configuration, PIN = L20, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_UART1_TX, 0); - /* UART1_RX pin configuration, PIN = T21, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_UART1_RX, 0); -} - -/**************************************** - * Routine: muxSetupLCD (ostboot) - * Description: Setup lcd muxing - *****************************************/ -void muxSetupLCD(void) -{ - /* LCD_D0 pin configuration, PIN = Y7, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D0, 0); - /* LCD_D1 pin configuration, PIN = P10 , Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D1, 0); - /* LCD_D2 pin configuration, PIN = V8, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D2, 0); - /* LCD_D3 pin configuration, PIN = Y8, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D3, 0); - /* LCD_D4 pin configuration, PIN = W8, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D4, 0); - /* LCD_D5 pin configuration, PIN = R10, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D5, 0); - /* LCD_D6 pin configuration, PIN = Y9, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D6, 0); - /* LCD_D7 pin configuration, PIN = V9, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D7, 0); - /* LCD_D8 pin configuration, PIN = W9, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D8, 0); - /* LCD_D9 pin configuration, PIN = P11, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D9, 0); - /* LCD_D10 pin configuration, PIN = V10, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D10, 0); - /* LCD_D11 pin configuration, PIN = Y10, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D11, 0); - /* LCD_D12 pin configuration, PIN = W10, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D12, 0); - /* LCD_D13 pin configuration, PIN = R11, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D13, 0); - /* LCD_D14 pin configuration, PIN = V11, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D14, 0); - /* LCD_D15 pin configuration, PIN = W11, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D15, 0); - /* LCD_D16 pin configuration, PIN = P12, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D16, 0); - /* LCD_D17 pin configuration, PIN = R12, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_D17, 0); - /* LCD_PCLK pin configuration, PIN = W6, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_PCLK, 0); - /* LCD_VSYNC pin configuration, PIN = V7, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_VSYNC, 0); - /* LCD_HSYNC pin configuration, PIN = Y6, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_HSYNC, 0); - /* LCD_ACBIAS pin configuration, PIN = W7, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_DSS_ACBIAS, 0); -} - -/**************************************** - * Routine: muxSetupMMCSD (ostboot) - * Description: set up MMC muxing - *****************************************/ -void muxSetupMMCSD(void) -{ - /* SDMMC_CLKI pin configuration, PIN = H15, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_CLKI, 0); - /* SDMMC_CLKO pin configuration, PIN = G19, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_CLKO, 0); - /* SDMMC_CMD pin configuration, PIN = H18, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_CMD, 0); - /* SDMMC_DAT0 pin configuration, PIN = F20, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_DAT0, 0); - /* SDMMC_DAT1 pin configuration, PIN = H14, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_DAT1, 0); - /* SDMMC_DAT2 pin configuration, PIN = E19, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_DAT2, 0); - /* SDMMC_DAT3 pin configuration, PIN = D19, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_DAT3, 0); - /* SDMMC_DDIR0 pin configuration, PIN = F19, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR0, 0); - /* SDMMC_DDIR1 pin configuration, PIN = E20, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR1, 0); - /* SDMMC_DDIR2 pin configuration, PIN = F18, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR2, 0); - /* SDMMC_DDIR3 pin configuration, PIN = E18, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_DAT_DIR3, 0); - /* SDMMC_CDIR pin configuration, PIN = G18, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_MMC_CMD_DIR, 0); -} - -/****************************************** - * Routine: muxSetupTouchScreen (ostboot) - * Description: Set up touch screen muxing - *******************************************/ -void muxSetupTouchScreen(void) -{ - /* SPI1_CLK pin configuration, PIN = U18, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_SPI1_CLK, 0); - /* SPI1_MOSI pin configuration, PIN = V20, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_SPI1_SIMO, 0); - /* SPI1_MISO pin configuration, PIN = T18, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_SPI1_SOMI, 0); - /* SPI1_nCS0 pin configuration, PIN = U19, Mode = 0, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_SPI1_NCS0, 0); -#define CONTROL_PADCONF_GPIO85 CONTROL_PADCONF_SPI1_NCS1 - /* PEN_IRQ pin configuration, PIN = N15, Mode = 3, PUPD=Disabled */ - write_config_reg(CONTROL_PADCONF_GPIO85, 3); -} - -/*************************************************************** - * Routine: muxSetupGPMC (ostboot) - * Description: Configures balls which cam up in protected mode - ***************************************************************/ -void muxSetupGPMC(void) -{ - /* gpmc_io_dir, MCR */ - volatile unsigned int *MCR = (unsigned int *) 0x4800008C; - *MCR = 0x19000000; - - /* NOR FLASH CS0 */ - /* signal - Gpmc_clk; pin - J4; offset - 0x0088; mode 0; Byte-3 */ - write_config_reg(CONTROL_PADCONF_GPMC_D2_BYTE3, 0); - /* MPDB(Multi Port Debug Port) CS1 */ - /* signal - gpmc_ncs1; pin - N8; offset - 0x008D; mode 0; Byte-1 */ - write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE1, 0); - /* signal - Gpmc_ncs2; pin - E2; offset - 0x008E; mode 0; Byte-2 */ - write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE2, 0); - /* signal - Gpmc_ncs3; pin - N2; offset - 0x008F; mode 0; Byte-3 */ - write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE3, 0); - /* signal - Gpmc_ncs4; pin - ??; offset - 0x0090; mode 0; Byte-4 */ - write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE4, 0); - /* signal - Gpmc_ncs5; pin - ??; offset - 0x0091; mode 0; Byte-5 */ - write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE5, 0); - /* signal - Gpmc_ncs6; pin - ??; offset - 0x0092; mode 0; Byte-6 */ - write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE6, 0); - /* signal - Gpmc_ncs7; pin - ??; offset - 0x0093; mode 0; Byte-7 */ - write_config_reg(CONTROL_PADCONF_GPMC_NCS0_BYTE7, 0); -} - -/**************************************************************** - * Routine: muxSetupSDRC (ostboot) - * Description: Configures balls which come up in protected mode - ****************************************************************/ -void muxSetupSDRC(void) -{ - /* It's set by IPL */ -} diff --git a/board/apollon/config.mk b/board/apollon/config.mk deleted file mode 100644 index 66005d4..0000000 --- a/board/apollon/config.mk +++ /dev/null @@ -1,25 +0,0 @@ -# -# (C) Copyright 2005-2007 -# Samsung Electronics -# -# Samsung December board with OMAP2420 (ARM1136) cpu -# see http://www.ti.com/ for more information on Texas Instruments -# -# December has 1 bank of 128MB mDDR-SDRAM on CS0 -# December has 1 bank of 00MB mDDR-SDRAM on CS1 -# Physical Address: -# 8000'0000 (bank0) -# A000/0000 (bank1) ES2 will be configurable -# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000 -# (mem base + reserved) -# For use with external or internal boots. -CONFIG_SYS_TEXT_BASE = 0x83e80000 - -# Used with full SRAM boot. -# This is either with a GP system or a signed boot image. -# easiest, and safest way to go if you can. -#CONFIG_SYS_TEXT_BASE = 0x40270000 - -# Handy to get symbols to debug ROM version. -#CONFIG_SYS_TEXT_BASE = 0x0 -#CONFIG_SYS_TEXT_BASE = 0x08000000 diff --git a/board/apollon/lowlevel_init.S b/board/apollon/lowlevel_init.S deleted file mode 100644 index f066fe4..0000000 --- a/board/apollon/lowlevel_init.S +++ /dev/null @@ -1,337 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2005-2007 - * Samsung Electronics, - * Kyungmin Park <kyungmin.park@samsung.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <config.h> -#include <version.h> -#include <asm/arch/omap2420.h> -#include <asm/arch/mem.h> -#include <asm/arch/clocks.h> -#include "mem.h" - -#define APOLLON_CS0_BASE 0x00000000 - -#ifdef PRCM_CONFIG_I -#define SDRC_ACTIM_CTRLA_0_VAL 0x7BA35907 -#define SDRC_ACTIM_CTRLB_0_VAL 0x00000013 -#define SDRC_RFR_CTRL_0_VAL 0x00044C01 -#elif defined(PRCM_CONFIG_II) -#define SDRC_ACTIM_CTRLA_0_VAL 0x4A59B485 -#define SDRC_ACTIM_CTRLB_0_VAL 0x0000000C -#define SDRC_RFR_CTRL_0_VAL 0x00030001 -#endif - -#define SDRAM_BASE_ADDRESS 0x80008000 - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */ - -.globl lowlevel_init -lowlevel_init: - -#ifdef CONFIG_SYS_NOR_BOOT - /* Check running in SDRAM */ - mov r0, pc, lsr #28 - cmp r0, #8 - beq prcm_setup - -flash_setup: - /* In Flash */ - ldr r0, =WD2_BASE - ldr r1, =WD_UNLOCK1 - str r1, [r0, #WSPR] - - ldr r1, =WD_UNLOCK2 - str r1, [r0, #WSPR] - - /* Pin muxing for SDRC */ - mov r1, #0x00 - ldr r0, =0x480000A1 /* ball C12, mode 0 */ - strb r1, [r0] - - ldr r0, =0x48000032 /* ball D11, mode 0 */ - strb r1, [r0] - - ldr r0, =0x480000A3 /* ball B13, mode 0 */ - strb r1, [r0] - - /* SDRC setting */ - ldr r0, =OMAP2420_SDRC_BASE - ldr r1, =0x00000010 - str r1, [r0, #0x10] - - ldr r1, =0x00000100 - str r1, [r0, #0x44] - - /* SDRC CS0 configuration */ - ldr r1, =0x00d04011 - str r1, [r0, #0x80] - - ldr r1, =SDRC_ACTIM_CTRLA_0_VAL - str r1, [r0, #0x9C] - - ldr r1, =SDRC_ACTIM_CTRLB_0_VAL - str r1, [r0, #0xA0] - - ldr r1, =SDRC_RFR_CTRL_0_VAL - str r1, [r0, #0xA4] - - ldr r1, =0x00000041 - str r1, [r0, #0x70] - - /* Manual command sequence */ - ldr r1, =0x00000007 - str r1, [r0, #0xA8] - - ldr r1, =0x00000000 - str r1, [r0, #0xA8] - - ldr r1, =0x00000001 - str r1, [r0, #0xA8] - - ldr r1, =0x00000002 - str r1, [r0, #0xA8] - str r1, [r0, #0xA8] - - /* - * CS0 SDRC Mode register - * Burst length = 4 - DDR memory - * Serial mode - * CAS latency = 3 - */ - ldr r1, =0x00000032 - str r1, [r0, #0x84] - - /* Note: You MUST set EMR values */ - /* EMR1 & EMR2 */ - ldr r1, =0x00000000 - str r1, [r0, #0x88] - str r1, [r0, #0x8C] - -#ifdef OLD_SDRC_DLLA_CTRL - /* SDRC_DLLA_CTRL */ - ldr r1, =0x00007306 - str r1, [r0, #0x60] - - ldr r1, =0x00007303 - str r1, [r0, #0x60] -#else - /* SDRC_DLLA_CTRL */ - ldr r1, =0x00000506 - str r1, [r0, #0x60] - - ldr r1, =0x00000503 - str r1, [r0, #0x60] -#endif - -#ifdef __BROKEN_FEATURE__ - /* SDRC_DLLB_CTRL */ - ldr r1, =0x00000506 - str r1, [r0, #0x68] - - ldr r1, =0x00000503 - str r1, [r0, #0x68] -#endif - - /* little delay after init */ - mov r2, #0x1800 -1: - subs r2, r2, #0x1 - bne 1b - - /* Setup base address */ - ldr r0, =0x00000000 /* NOR address */ - ldr r1, =SDRAM_BASE_ADDRESS /* SDRAM address */ - ldr r2, =0x20000 /* Size: 128KB */ - -copy_loop: - ldmia r0!, {r3-r10} - stmia r1!, {r3-r10} - cmp r0, r2 - ble copy_loop - - ldr r1, =SDRAM_BASE_ADDRESS - mov lr, pc - mov pc, r1 -#endif - -prcm_setup: - ldr r0, =OMAP2420_CM_BASE - ldr r1, [r0, #0x544] /* CLKSEL2_PLL */ - bic r1, r1, #0x03 - orr r1, r1, #0x02 - str r1, [r0, #0x544] - - ldr r1, [r0, #0x500] - bic r1, r1, #0x03 - orr r1, r1, #0x01 - str r1, [r0, #0x500] - - ldr r1, [r0, #0x140] - bic r1, r1, #0x1f - orr r1, r1, #0x02 - str r1, [r0, #0x140] - -#ifdef PRCM_CONFIG_I - ldr r1, =0x000003C3 -#else - ldr r1, =0x00000343 -#endif - str r1, [r0, #0x840] - - ldr r1, =0x00000002 - str r1, [r0, #0x340] - - ldr r1, =CM_CLKSEL1_CORE -#ifdef PRCM_CONFIG_I - ldr r2, =0x08300C44 -#else - ldr r2, =0x04600C26 -#endif - str r2, [r1] - - ldr r0, =OMAP2420_CM_BASE - ldr r1, [r0, #0x084] - and r1, r1, #0x01 - cmp r1, #0x01 - bne clkvalid - - b . - -clkvalid: - mov r1, #0x01 - str r1, [r0, #0x080] - -waitvalid: - ldr r1, [r0, #0x084] - and r1, r1, #0x01 - cmp r1, #0x00 - bne waitvalid - - ldr r0, =CM_CLKSEL1_PLL -#ifdef PRCM_CONFIG_I - ldr r1, =0x01837100 -#else - ldr r1, =0x01832100 -#endif - str r1, [r0] - - ldr r0, =PRCM_CLKCFG_CTRL - mov r1, #0x01 - str r1, [r0] - mov r6, #0x50 -loop1: - subs r6, r6, #0x01 - cmp r6, #0x01 - bne loop1 - - ldr r0, =CM_CLKEN_PLL - mov r1, #0x0f - str r1, [r0] - - mov r6, #0x100 -loop2: - subs r6, r6, #0x01 - cmp r6, #0x01 - bne loop2 - - ldr r0, =0x48008200 - ldr r1, =0xbfffffff - str r1, [r0] - - ldr r0, =0x48008210 - ldr r1, =0xfffffff9 - str r1, [r0] - - ldr r0, =0x4806a004 - ldr r1, =0x00 - strb r1, [r0] - - ldr r0, =0x4806a020 - ldr r1, =0x07 - strb r1, [r0] - - ldr r0, =0x4806a00c - ldr r1, =0x83 - strb r1, [r0] - - ldr r0, =0x4806a000 - ldr r1, =0x1a - strb r1, [r0] - - ldr r0, =0x4806a004 - ldr r1, =0x00 - strb r1, [r0] - - ldr r0, =0x4806a00c - ldr r1, =0x03 - strb r1, [r0] - - ldr r0, =0x4806a010 - ldr r1, =0x03 - strb r1, [r0] - - ldr r0, =0x4806a008 - ldr r1, =0x04 - strb r1, [r0] - - ldr r0, =0x4806a020 - ldr r1, =0x00 - strb r1, [r0] - -#if 0 - ldr r0, =0x4806a000 - mov r1, #'u' - strb r1, [r0] -#endif - -#if 0 - /* LED0 OFF */ - ldr r3, =0x480000E5 - mov r4, #0x0b - strb r4, [r3] -#endif - - ldr sp, SRAM_STACK - str ip, [sp] /* stash old link register */ - mov ip, lr /* save link reg across call */ - bl s_init /* go setup pll,mux,memory */ - ldr ip, [sp] /* restore save ip */ - mov lr, ip /* restore link reg */ - - /* map interrupt controller */ - ldr r0, VAL_INTH_SETUP - mcr p15, 0, r0, c15, c2, 4 - - /* back to arch calling code */ - mov pc, lr - - /* the literal pools origin */ - .ltorg - -VAL_INTH_SETUP: - .word PERIFERAL_PORT_BASE -SRAM_STACK: - .word LOW_LEVEL_SRAM_STACK diff --git a/board/apollon/mem.c b/board/apollon/mem.c deleted file mode 100644 index 36bf6e9..0000000 --- a/board/apollon/mem.c +++ /dev/null @@ -1,237 +0,0 @@ -/* - * (C) Copyright 2005-2007 - * Samsung Electronics, - * Kyungmin Park <kyungmin.park@samsung.com> - * - * Derived from omap2420 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/arch/omap2420.h> -#include <asm/io.h> -#include <asm/arch/bits.h> -#include <asm/arch/mux.h> -#include <asm/arch/mem.h> -#include <asm/arch/clocks.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/sys_info.h> - -#include "mem.h" - -/************************************************************ - * sdelay() - simple spin loop. Will be constant time as - * its generally used in 12MHz bypass conditions only. This - * is necessary until timers are accessible. - * - * not inline to increase chances its in cache when called - *************************************************************/ -void sdelay(unsigned long loops) -{ - __asm__("1:\n" "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0"(loops)); -} - -/******************************************************************** - * prcm_init() - inits clocks for PRCM as defined in clocks.h - * (config II default). - * -- called from SRAM, or Flash (using temp SRAM stack). - ********************************************************************/ -void prcm_init(void) { } - -/************************************************************************** - * make_cs1_contiguous() - for es2 and above remap cs1 behind cs0 to allow - * command line mem=xyz use all memory with out discontigious support - * compiled in. Could do it at the ATAG, but there really is two banks... - * Called as part of 2nd phase DDR init. - **************************************************************************/ -void make_cs1_contiguous(void) -{ - u32 size, a_add_low, a_add_high; - - size = get_sdr_cs_size(SDRC_CS0_OSET); - size /= SZ_32M; /* find size to offset CS1 */ - a_add_high = (size & 3) << 8; /* set up low field */ - a_add_low = (size & 0x3C) >> 2; /* set up high field */ - __raw_writel((a_add_high | a_add_low), SDRC_CS_CFG); - -} - -/******************************************************** - * mem_ok() - test used to see if timings are correct - * for a part. Helps in gussing which part - * we are currently using. - *******************************************************/ -u32 mem_ok(void) -{ - u32 val1, val2; - u32 pattern = 0x12345678; - - /* clear pos A */ - __raw_writel(0x0, OMAP2420_SDRC_CS0 + 0x400); - /* pattern to pos B */ - __raw_writel(pattern, OMAP2420_SDRC_CS0); - /* remove pattern off the bus */ - __raw_writel(0x0, OMAP2420_SDRC_CS0 + 4); - /* get pos A value */ - val1 = __raw_readl(OMAP2420_SDRC_CS0 + 0x400); - val2 = __raw_readl(OMAP2420_SDRC_CS0); /* get val2 */ - - /* see if pos A value changed */ - if ((val1 != 0) || (val2 != pattern)) - return (0); - else - return (1); -} - -/******************************************************** - * sdrc_init() - init the sdrc chip selects CS0 and CS1 - * - early init routines, called from flash or - * SRAM. - *******************************************************/ -void sdrc_init(void) -{ -#define EARLY_INIT 1 - /* only init up first bank here */ - do_sdrc_init(SDRC_CS0_OSET, EARLY_INIT); -} - -/************************************************************************* - * do_sdrc_init(): initialize the SDRAM for use. - * -called from low level code with stack only. - * -code sets up SDRAM timing and muxing for 2422 or 2420. - * -optimal settings can be placed here, or redone after i2c - * inspection of board info - * - * This is a bit ugly, but should handle all memory moduels - * used with the APOLLON. The first time though this code from s_init() - * we configure the first chip select. Later on we come back and - * will configure the 2nd chip select if it exists. - * - **************************************************************************/ -void do_sdrc_init(u32 offset, u32 early) -{ -} - -/***************************************************** - * gpmc_init(): init gpmc bus - * Init GPMC for x16, MuxMode (SDRAM in x32). - * This code can only be executed from SRAM or SDRAM. - *****************************************************/ -void gpmc_init(void) -{ - u32 mux = 0, mtype, mwidth, rev, tval; - - rev = get_cpu_rev(); - if (rev == CPU_2420_2422_ES1) - tval = 1; - else - tval = 0; /* disable bit switched meaning */ - - /* global settings */ - __raw_writel(0x10, GPMC_SYSCONFIG); /* smart idle */ - __raw_writel(0x0, GPMC_IRQENABLE); /* isr's sources masked */ - __raw_writel(tval, GPMC_TIMEOUT_CONTROL); /* timeout disable */ -#ifdef CONFIG_SYS_NAND_BOOT - /* set nWP, disable limited addr */ - __raw_writel(0x001, GPMC_CONFIG); -#else - /* set nWP, disable limited addr */ - __raw_writel(0x111, GPMC_CONFIG); -#endif - - /* discover bus connection from sysboot */ - if (is_gpmc_muxed() == GPMC_MUXED) - mux = BIT9; - mtype = get_gpmc0_type(); - mwidth = get_gpmc0_width(); - - /* setup cs0 */ - __raw_writel(0x0, GPMC_CONFIG7_0); /* disable current map */ - sdelay(1000); - -#ifdef CONFIG_SYS_NOR_BOOT - __raw_writel(APOLLON_24XX_GPMC_CONFIG1_3, GPMC_CONFIG1_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG2_3, GPMC_CONFIG2_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG3_3, GPMC_CONFIG3_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG4_3, GPMC_CONFIG4_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG5_3, GPMC_CONFIG5_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG6_3, GPMC_CONFIG6_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG7_3, GPMC_CONFIG7_0); -#else - __raw_writel(APOLLON_24XX_GPMC_CONFIG1_0 | mux | mtype | mwidth, - GPMC_CONFIG1_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG6_0, GPMC_CONFIG6_0); - __raw_writel(APOLLON_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_0); -#endif - sdelay(2000); - - /* setup cs1 */ - __raw_writel(0, GPMC_CONFIG7_1); /* disable any mapping */ - sdelay(1000); - - __raw_writel(APOLLON_24XX_GPMC_CONFIG1_1, GPMC_CONFIG1_1); - __raw_writel(APOLLON_24XX_GPMC_CONFIG2_1, GPMC_CONFIG2_1); - __raw_writel(APOLLON_24XX_GPMC_CONFIG3_1, GPMC_CONFIG3_1); - __raw_writel(APOLLON_24XX_GPMC_CONFIG4_1, GPMC_CONFIG4_1); - __raw_writel(APOLLON_24XX_GPMC_CONFIG5_1, GPMC_CONFIG5_1); - __raw_writel(APOLLON_24XX_GPMC_CONFIG6_1, GPMC_CONFIG6_1); - __raw_writel(APOLLON_24XX_GPMC_CONFIG7_1, GPMC_CONFIG7_1); - sdelay(2000); - - /* setup cs2 */ - __raw_writel(0x0, GPMC_CONFIG7_2); /* disable current map */ - sdelay(1000); - __raw_writel(APOLLON_24XX_GPMC_CONFIG1_0 | mux | mtype | mwidth, - GPMC_CONFIG1_2); - /* It's same as cs 0 */ - __raw_writel(APOLLON_24XX_GPMC_CONFIG2_0, GPMC_CONFIG2_2); - __raw_writel(APOLLON_24XX_GPMC_CONFIG3_0, GPMC_CONFIG3_2); - __raw_writel(APOLLON_24XX_GPMC_CONFIG4_0, GPMC_CONFIG4_2); - __raw_writel(APOLLON_24XX_GPMC_CONFIG5_0, GPMC_CONFIG5_2); - __raw_writel(APOLLON_24XX_GPMC_CONFIG6_0, GPMC_CONFIG6_2); -#ifdef CONFIG_SYS_NOR_BOOT - __raw_writel(APOLLON_24XX_GPMC_CONFIG7_0, GPMC_CONFIG7_2); -#else - __raw_writel(APOLLON_24XX_GPMC_CONFIG7_2, GPMC_CONFIG7_2); -#endif - -#ifndef CONFIG_SYS_NOR_BOOT - /* setup cs3 */ - __raw_writel(0, GPMC_CONFIG7_3); /* disable any mapping */ - sdelay(1000); - - __raw_writel(APOLLON_24XX_GPMC_CONFIG1_3, GPMC_CONFIG1_3); - __raw_writel(APOLLON_24XX_GPMC_CONFIG2_3, GPMC_CONFIG2_3); - __raw_writel(APOLLON_24XX_GPMC_CONFIG3_3, GPMC_CONFIG3_3); - __raw_writel(APOLLON_24XX_GPMC_CONFIG4_3, GPMC_CONFIG4_3); - __raw_writel(APOLLON_24XX_GPMC_CONFIG5_3, GPMC_CONFIG5_3); - __raw_writel(APOLLON_24XX_GPMC_CONFIG6_3, GPMC_CONFIG6_3); - __raw_writel(APOLLON_24XX_GPMC_CONFIG7_3, GPMC_CONFIG7_3); -#endif - -#ifndef ASYNC_NOR - __raw_writew(0xaa, (APOLLON_CS3_BASE + 0xaaa)); - __raw_writew(0x55, (APOLLON_CS3_BASE + 0x554)); - __raw_writew(0xc0, (APOLLON_CS3_BASE | SYNC_NOR_VALUE)); -#endif - sdelay(2000); -} diff --git a/board/apollon/mem.h b/board/apollon/mem.h deleted file mode 100644 index 09c4ea4..0000000 --- a/board/apollon/mem.h +++ /dev/null @@ -1,170 +0,0 @@ -/* - * (C) Copyright 2005-2007 - * Samsung Electronics, - * Kyungmin Park <kyungmin.park@samsung.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef _APOLLON_OMAP24XX_MEM_H_ -#define _APOLLON_OMAP24XX_MEM_H_ - -/* Slower full frequency range default timings for x32 operation*/ -#define APOLLON_2420_SDRC_SHARING 0x00000100 -#define APOLLON_2420_SDRC_MDCFG_0_DDR 0x00d04011 -#define APOLLON_2420_SDRC_MR_0_DDR 0x00000032 - -/* optimized timings good for current shipping parts */ -#define APOLLON_242X_SDRC_ACTIM_CTRLA_0_100MHz 0x4A59B485 -#define APOLLON_242X_SDRC_ACTIM_CTRLB_0_100MHz 0x0000000C - -#define APOLLON_242X_SDRC_ACTIM_CTRLA_0_166MHz 0x7BA35907 -#define APOLLON_242X_SDRC_ACTIM_CTRLB_0_166MHz 0x00000013 - -#define APOLLON_242X_SDRC_RFR_CTRL_100MHz 0x00030001 -#define APOLLON_242X_SDRC_RFR_CTRL_166MHz 0x00044C01 - -#define APOLLON_242x_SDRC_DLLAB_CTRL_100MHz 0x00007306 -#define APOLLON_242x_SDRC_DLLAB_CTRL_166MHz 0x00000506 - -#ifdef PRCM_CONFIG_I -#define APOLLON_2420_SDRC_ACTIM_CTRLA_0 APOLLON_242X_SDRC_ACTIM_CTRLA_0_166MHz -#define APOLLON_2420_SDRC_ACTIM_CTRLB_0 APOLLON_242X_SDRC_ACTIM_CTRLB_0_166MHz -#define APOLLON_2420_SDRC_RFR_CTRL APOLLON_242X_SDRC_RFR_CTRL_166MHz -#define APOLLON_2420_SDRC_DLLAB_CTRL APOLLON_242x_SDRC_DLLAB_CTRL_166MHz -#elif PRCM_CONFIG_II -#define APOLLON_2420_SDRC_ACTIM_CTRLA_0 APOLLON_242X_SDRC_ACTIM_CTRLA_0_100MHz -#define APOLLON_2420_SDRC_ACTIM_CTRLB_0 APOLLON_242X_SDRC_ACTIM_CTRLB_0_100MHz -#define APOLLON_2420_SDRC_RFR_CTRL APOLLON_242X_SDRC_RFR_CTRL_100MHz -#define APOLLON_2420_SDRC_DLLAB_CTRL APOLLON_242x_SDRC_DLLAB_CTRL_100MHz -#endif - -/* GPMC settings */ -#ifdef PRCM_CONFIG_I /* L3 at 165MHz */ -/* CS0: OneNAND */ -# define APOLLON_24XX_GPMC_CONFIG1_0 0x00000001 -# define APOLLON_24XX_GPMC_CONFIG2_0 0x000c1000 -# define APOLLON_24XX_GPMC_CONFIG3_0 0x00030400 -# define APOLLON_24XX_GPMC_CONFIG4_0 0x0b841006 -# define APOLLON_24XX_GPMC_CONFIG5_0 0x020f0c11 -# define APOLLON_24XX_GPMC_CONFIG6_0 0x00000000 -# define APOLLON_24XX_GPMC_CONFIG7_0 (0x00000e40|(APOLLON_CS0_BASE >> 24)) - -/* CS1: Ethernet */ -# define APOLLON_24XX_GPMC_CONFIG1_1 0x00011203 -# define APOLLON_24XX_GPMC_CONFIG2_1 0x001F1F01 -# define APOLLON_24XX_GPMC_CONFIG3_1 0x00080803 -# define APOLLON_24XX_GPMC_CONFIG4_1 0x1C0b1C0a -# define APOLLON_24XX_GPMC_CONFIG5_1 0x041F1F1F -# define APOLLON_24XX_GPMC_CONFIG6_1 0x000004C4 -# define APOLLON_24XX_GPMC_CONFIG7_1 (0x00000F40|(APOLLON_CS1_BASE >> 24)) - -/* CS2: OneNAND */ -/* It's same as CS0 */ -# define APOLLON_24XX_GPMC_CONFIG7_2 (0x00000e40|(APOLLON_CS2_BASE >> 24)) - -/* CS3: NOR */ -#ifdef ASYNC_NOR -# define APOLLON_24XX_GPMC_CONFIG1_3 0x00021201 -# define APOLLON_24XX_GPMC_CONFIG2_3 0x00121601 -# define APOLLON_24XX_GPMC_CONFIG3_3 0x00040401 -# define APOLLON_24XX_GPMC_CONFIG4_3 0x12061605 -# define APOLLON_24XX_GPMC_CONFIG5_3 0x01151317 -#else -# define SYNC_NOR_VALUE 0x24aaa -# define APOLLON_24XX_GPMC_CONFIG1_3 0xe5011211 -# define APOLLON_24XX_GPMC_CONFIG2_3 0x00090b01 -# define APOLLON_24XX_GPMC_CONFIG3_3 0x00020201 -# define APOLLON_24XX_GPMC_CONFIG4_3 0x09030b03 -# define APOLLON_24XX_GPMC_CONFIG5_3 0x010a0a0c -#endif /* ASYNC_NOR */ -# define APOLLON_24XX_GPMC_CONFIG6_3 0x00000000 -# define APOLLON_24XX_GPMC_CONFIG7_3 (0x00000e40|(APOLLON_CS3_BASE >> 24)) -#endif /* endif PRCM_CONFIG_I */ - -#ifdef PRCM_CONFIG_II /* L3 at 100MHz */ -/* CS0: OneNAND */ -# define APOLLON_24XX_GPMC_CONFIG1_0 0x00000001 -# define APOLLON_24XX_GPMC_CONFIG2_0 0x00081080 -# define APOLLON_24XX_GPMC_CONFIG3_0 0x00030300 -# define APOLLON_24XX_GPMC_CONFIG4_0 0x08041004 -# define APOLLON_24XX_GPMC_CONFIG5_0 0x020b0910 -# define APOLLON_24XX_GPMC_CONFIG6_0 0x00000000 -# define APOLLON_24XX_GPMC_CONFIG7_0 (0x00000C40|(APOLLON_CS0_BASE >> 24)) - -/* CS1: ethernet */ -# define APOLLON_24XX_GPMC_CONFIG1_1 0x00401203 -# define APOLLON_24XX_GPMC_CONFIG2_1 0x001F1F01 -# define APOLLON_24XX_GPMC_CONFIG3_1 0x00080803 -# define APOLLON_24XX_GPMC_CONFIG4_1 0x1C091C09 -# define APOLLON_24XX_GPMC_CONFIG5_1 0x041F1F1F -# define APOLLON_24XX_GPMC_CONFIG6_1 0x000004C4 -# define APOLLON_24XX_GPMC_CONFIG7_1 (0x00000F40|(APOLLON_CS1_BASE >> 24)) - -/* CS2: OneNAND */ -/* It's same as CS0 */ -# define APOLLON_24XX_GPMC_CONFIG7_2 (0x00000e40|(APOLLON_CS2_BASE >> 24)) - -/* CS3: NOR */ -#define ASYNC_NOR -#ifdef ASYNC_NOR -# define APOLLON_24XX_GPMC_CONFIG1_3 0x00021201 -# define APOLLON_24XX_GPMC_CONFIG2_3 0x00121601 -# define APOLLON_24XX_GPMC_CONFIG3_3 0x00040401 -# define APOLLON_24XX_GPMC_CONFIG4_3 0x12061605 -# define APOLLON_24XX_GPMC_CONFIG5_3 0x01151317 -#else -# define SYNC_NOR_VALUE 0x24aaa -# define APOLLON_24XX_GPMC_CONFIG1_3 0xe1001202 -# define APOLLON_24XX_GPMC_CONFIG2_3 0x00151501 -# define APOLLON_24XX_GPMC_CONFIG3_3 0x00050501 -# define APOLLON_24XX_GPMC_CONFIG4_3 0x0e070e07 -# define APOLLON_24XX_GPMC_CONFIG5_3 0x01131F1F -#endif /* ASYNC_NOR */ -# define APOLLON_24XX_GPMC_CONFIG6_3 0x00000000 -# define APOLLON_24XX_GPMC_CONFIG7_3 (0x00000C40|(APOLLON_CS3_BASE >> 24)) -#endif /* endif PRCM_CONFIG_II */ - -#ifdef PRCM_CONFIG_III /* L3 at 133MHz */ -# ifdef CONFIG_SYS_NAND_BOOT -# define APOLLON_24XX_GPMC_CONFIG1_0 0x0 -# define APOLLON_24XX_GPMC_CONFIG2_0 0x00141400 -# define APOLLON_24XX_GPMC_CONFIG3_0 0x00141400 -# define APOLLON_24XX_GPMC_CONFIG4_0 0x0F010F01 -# define APOLLON_24XX_GPMC_CONFIG5_0 0x010C1414 -# define APOLLON_24XX_GPMC_CONFIG6_0 0x00000A80 -# else /* NOR boot */ -# define APOLLON_24XX_GPMC_CONFIG1_0 0x3 -# define APOLLON_24XX_GPMC_CONFIG2_0 0x00151501 -# define APOLLON_24XX_GPMC_CONFIG3_0 0x00060602 -# define APOLLON_24XX_GPMC_CONFIG4_0 0x10081008 -# define APOLLON_24XX_GPMC_CONFIG5_0 0x01131F1F -# define APOLLON_24XX_GPMC_CONFIG6_0 0x000004c4 -# endif /* endif CONFIG_SYS_NAND_BOOT */ -# define APOLLON_24XX_GPMC_CONFIG7_0 (0x00000C40|(APOLLON_CS0_BASE >> 24)) -# define APOLLON_24XX_GPMC_CONFIG1_1 0x00011000 -# define APOLLON_24XX_GPMC_CONFIG2_1 0x001f1f01 -# define APOLLON_24XX_GPMC_CONFIG3_1 0x00080803 -# define APOLLON_24XX_GPMC_CONFIG4_1 0x1C091C09 -# define APOLLON_24XX_GPMC_CONFIG5_1 0x041f1F1F -# define APOLLON_24XX_GPMC_CONFIG6_1 0x000004C4 -# define APOLLON_24XX_GPMC_CONFIG7_1 (0x00000F40|(APOLLON_CS1_BASE >> 24)) -#endif /* endif CONFIG_SYS_PRCM_III */ - -#endif /* endif _APOLLON_OMAP24XX_MEM_H_ */ diff --git a/board/apollon/sys_info.c b/board/apollon/sys_info.c deleted file mode 100644 index 4f950ae..0000000 --- a/board/apollon/sys_info.c +++ /dev/null @@ -1,396 +0,0 @@ -/* - * (C) Copyright 2005-2007 - * Samsung Electronics, - * Kyungmin Park <kyungmin.park@samsung.com> - * - * Derived from omap2420 - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <asm/arch/omap2420.h> -#include <asm/io.h> -#include <asm/arch/bits.h> -#include <asm/arch/mem.h> /* get mem tables */ -#include <asm/arch/sys_proto.h> -#include <asm/arch/sys_info.h> -#include <i2c.h> - -/************************************************************************** - * get_prod_id() - get id info from chips - ***************************************************************************/ -static u32 get_prod_id(void) -{ - u32 p; - p = __raw_readl(PRODUCTION_ID); /* get production ID */ - return ((p & CPU_242X_PID_MASK) >> 16); -} - -/************************************************************************** - * get_cpu_type() - low level get cpu type - * - no C globals yet. - * - just looking to say if this is a 2422 or 2420 or ... - * - to start with we will look at switch settings.. - * - 2422 id's same as 2420 for ES1 will rely on H4 board characteristics - * (mux for 2420, non-mux for 2422). - ***************************************************************************/ -u32 get_cpu_type(void) -{ - u32 v; - - switch (get_prod_id()) { - case 1:; /* 2420 */ - case 2: - return (CPU_2420); - break; /* 2420 pop */ - case 4: - return (CPU_2422); - break; - case 8: - return (CPU_2423); - break; - default: - break; /* early 2420/2422's unmarked */ - } - - v = __raw_readl(TAP_IDCODE_REG); - v &= CPU_24XX_ID_MASK; - /* currently 2420 and 2422 have same id */ - if (v == CPU_2420_CHIPID) { - if (is_gpmc_muxed() == GPMC_MUXED) /* if mux'ed */ - return (CPU_2420); - else - return (CPU_2422); - } else - return (CPU_2420); /* don't know, say 2420 */ -} - -/****************************************** - * get_cpu_rev(void) - extract version info - ******************************************/ -u32 get_cpu_rev(void) -{ - u32 v; - v = __raw_readl(TAP_IDCODE_REG); - v = v >> 28; - return (v + 1); /* currently 2422 and 2420 match up */ -} - -/**************************************************** - * is_mem_sdr() - return 1 if mem type in use is SDR - ****************************************************/ -u32 is_mem_sdr(void) -{ - volatile u32 *burst = (volatile u32 *)(SDRC_MR_0 + SDRC_CS0_OSET); - if (*burst == H4_2420_SDRC_MR_0_SDR) - return (1); - return (0); -} - -/*********************************************************** - * get_mem_type() - identify type of mDDR part used. - * 2422 uses stacked DDR, 2 parts CS0/CS1. - * 2420 may have 1 or 2, no good way to know...only init 1... - * when eeprom data is up we can select 1 more. - *************************************************************/ -u32 get_mem_type(void) -{ - u32 cpu, sdr = is_mem_sdr(); - - cpu = get_cpu_type(); - if (cpu == CPU_2422 || cpu == CPU_2423) - return (DDR_STACKED); - - if (get_prod_id() == 0x2) - return (XDR_POP); - - if (get_board_type() == BOARD_H4_MENELAUS) - if (sdr) - return (SDR_DISCRETE); - else - return (DDR_COMBO); - else if (sdr) /* SDP + SDR kit */ - return (SDR_DISCRETE); - else - return (DDR_DISCRETE); /* origional SDP */ -} - -/*********************************************************************** - * get_cs0_size() - get size of chip select 0/1 - ************************************************************************/ -u32 get_sdr_cs_size(u32 offset) -{ - u32 size; - size = __raw_readl(SDRC_MCFG_0 + offset) >> 8; /* get ram size field */ - size &= 0x2FF; /* remove unwanted bits */ - size *= SZ_2M; /* find size in MB */ - return (size); -} - -/*********************************************************************** - * get_board_type() - get board type based on current production stats. - * --- NOTE: 2 I2C EEPROMs will someday be populated with proper info. - * when they are available we can get info from there. This should - * be correct of all known boards up until today. - ************************************************************************/ -u32 get_board_type(void) -{ - return (BOARD_H4_SDP); -} - -/****************************************************************** - * get_sysboot_value() - get init word settings (dip switch on h4) - ******************************************************************/ -inline u32 get_sysboot_value(void) -{ - return (0x00000FFF & __raw_readl(CONTROL_STATUS)); -} - -/*************************************************************************** - * get_gpmc0_base() - Return current address hardware will be - * fetching from. The below effectively gives what is correct, its a bit - * mis-leading compared to the TRM. For the most general case the mask - * needs to be also taken into account this does work in practice. - * - for u-boot we currently map: - * -- 0 to nothing, - * -- 4 to flash - * -- 8 to enent - * -- c to wifi - ****************************************************************************/ -u32 get_gpmc0_base(void) -{ - u32 b; - - b = __raw_readl(GPMC_CONFIG7_0); - b &= 0x1F; /* keep base [5:0] */ - b = b << 24; /* ret 0x0b000000 */ - return (b); -} - -/***************************************************************** - * is_gpmc_muxed() - tells if address/data lines are multiplexed - *****************************************************************/ -u32 is_gpmc_muxed(void) -{ - u32 mux; - mux = get_sysboot_value(); - if ((mux & (BIT0 | BIT1 | BIT2 | BIT3)) == (BIT0 | BIT2 | BIT3)) - return (GPMC_MUXED); /* NAND Boot mode */ - if (mux & BIT1) /* if mux'ed */ - return (GPMC_MUXED); - else - return (GPMC_NONMUXED); -} - -/************************************************************************ - * get_gpmc0_type() - read sysboot lines to see type of memory attached - ************************************************************************/ -u32 get_gpmc0_type(void) -{ - u32 type; - type = get_sysboot_value(); - if ((type & (BIT3 | BIT2)) == (BIT3 | BIT2)) - return (TYPE_NAND); - else - return (TYPE_NOR); -} - -/******************************************************************* - * get_gpmc0_width() - See if bus is in x8 or x16 (mainly for nand) - *******************************************************************/ -u32 get_gpmc0_width(void) -{ - u32 width; - width = get_sysboot_value(); - if ((width & 0xF) == (BIT3 | BIT2)) - return (WIDTH_8BIT); - else - return (WIDTH_16BIT); -} - -/********************************************************************* - * wait_on_value() - common routine to allow waiting for changes in - * volatile regs. - *********************************************************************/ -u32 wait_on_value(u32 read_bit_mask, u32 match_value, u32 read_addr, u32 bound) -{ - u32 i = 0, val; - do { - ++i; - val = __raw_readl(read_addr) & read_bit_mask; - if (val == match_value) - return (1); - if (i == bound) - return (0); - } while (1); -} - -/********************************************************************* - * display_board_info() - print banner with board info. - *********************************************************************/ -void display_board_info(u32 btype) -{ - char cpu_2420[] = "2420"; /* cpu type */ - char cpu_2422[] = "2422"; - char cpu_2423[] = "2423"; - char mem_sdr[] = "mSDR"; /* memory type */ - char mem_ddr[] = "mDDR"; - char t_tst[] = "TST"; /* security level */ - char t_emu[] = "EMU"; - char t_hs[] = "HS"; - char t_gp[] = "GP"; - char unk[] = "?"; - - char *cpu_s, *mem_s, *sec_s; - u32 cpu, rev, sec; - - rev = get_cpu_rev(); - cpu = get_cpu_type(); - sec = get_device_type(); - - if (is_mem_sdr()) - mem_s = mem_sdr; - else - mem_s = mem_ddr; - - if (cpu == CPU_2423) - cpu_s = cpu_2423; - else if (cpu == CPU_2422) - cpu_s = cpu_2422; - else - cpu_s = cpu_2420; - - switch (sec) { - case TST_DEVICE: - sec_s = t_tst; - break; - case EMU_DEVICE: - sec_s = t_emu; - break; - case HS_DEVICE: - sec_s = t_hs; - break; - case GP_DEVICE: - sec_s = t_gp; - break; - default: - sec_s = unk; - } - - printf("OMAP%s-%s revision %d\n", cpu_s, sec_s, rev - 1); - printf("Samsung Apollon SDP Base Board + %s \n", mem_s); -} - -/************************************************************************* - * get_board_rev() - setup to pass kernel board revision information - * 0 = 242x IP platform (first 2xx boards) - * 1 = 242x Menelaus platfrom. - *************************************************************************/ -u32 get_board_rev(void) -{ - u32 rev = 0; - u32 btype = get_board_type(); - - if (btype == BOARD_H4_MENELAUS) - rev = 1; - return (rev); -} - -/******************************************************** - * get_base(); get upper addr of current execution - *******************************************************/ -u32 get_base(void) -{ - u32 val; - __asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory"); - val &= 0xF0000000; - val >>= 28; - return (val); -} - -/******************************************************** - * get_base2(); get 2upper addr of current execution - *******************************************************/ -u32 get_base2(void) -{ - u32 val; - __asm__ __volatile__("mov %0, pc \n":"=r"(val)::"memory"); - val &= 0xFF000000; - val >>= 24; - return (val); -} - -/******************************************************** - * running_in_flash() - tell if currently running in - * flash. - *******************************************************/ -u32 running_in_flash(void) -{ - if (get_base() < 4) - return (1); /* in flash */ - return (0); /* running in SRAM or SDRAM */ -} - -/******************************************************** - * running_in_sram() - tell if currently running in - * sram. - *******************************************************/ -u32 running_in_sram(void) -{ - if (get_base() == 4) - return (1); /* in SRAM */ - return (0); /* running in FLASH or SDRAM */ -} - -/******************************************************** - * running_in_sdram() - tell if currently running in - * flash. - *******************************************************/ -u32 running_in_sdram(void) -{ - if (get_base() > 4) - return (1); /* in sdram */ - return (0); /* running in SRAM or FLASH */ -} - -/************************************************************* - * running_from_internal_boot() - am I a signed NOR image. - *************************************************************/ -u32 running_from_internal_boot(void) -{ - u32 v, base; - - v = get_sysboot_value() & BIT3; - base = get_base2(); - /* if running at mask rom flash address and - * sysboot3 says this was an internal boot - */ - if ((base == 0x08) && v) - return (1); - else - return (0); -} - -/************************************************************* - * get_device_type(): tell if GP/HS/EMU/TST - *************************************************************/ -u32 get_device_type(void) -{ - int mode; - mode = __raw_readl(CONTROL_STATUS) & (BIT10 | BIT9 | BIT8); - return (mode >>= 8); -} diff --git a/board/apollon/Makefile b/board/atmel/atngw100mkii/Makefile index 1bf1a32..7fbd20d 100644 --- a/board/apollon/Makefile +++ b/board/atmel/atngw100mkii/Makefile @@ -1,9 +1,7 @@ # -# (C) Copyright 2000, 2001, 2002 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Copyright (C) 2005-2006 Atmel Corporation # -# See file CREDITS for list of people who contributed to this -# project. +# See file CREDITS for list of people who contributed to this project. # # This program is free software; you can redistribute it and/or # modify it under the terms of the GNU General Public License as @@ -19,25 +17,24 @@ # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place, Suite 330, Boston, # MA 02111-1307 USA -# include $(TOPDIR)/config.mk -LIB = $(obj)lib$(BOARD).o +LIB := $(obj)lib$(BOARD).o -COBJS-y := apollon.o mem.o sys_info.o -SOBJS := lowlevel_init.o +COBJS := $(BOARD).o -COBJS := $(COBJS-y) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) +OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) ######################################################################### +# defines $(obj).depend target include $(SRCTREE)/rules.mk sinclude $(obj).depend + +######################################################################### diff --git a/board/atmel/atngw100mkii/atngw100mkii.c b/board/atmel/atngw100mkii/atngw100mkii.c new file mode 100644 index 0000000..f4023b3 --- /dev/null +++ b/board/atmel/atngw100mkii/atngw100mkii.c @@ -0,0 +1,156 @@ +/* + * Copyright (C) 2010 Atmel Corporation + * + * Copyright (C) 2012 Andreas Bießmann <andreas.devel@googlemail.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#include <common.h> + +#include <spi.h> +#include <netdev.h> + +#include <asm/io.h> +#include <asm/sdram.h> +#include <asm/arch/clk.h> +#include <asm/arch/gpio.h> +#include <asm/arch/hmatrix.h> +#include <asm/arch/mmu.h> +#include <asm/arch/portmux.h> + +DECLARE_GLOBAL_DATA_PTR; + +struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = { + { + /* Atmel AT49BV640D 8 MiB x16 NOR flash on NCS0 */ + .virt_pgno = CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT, + .nr_pages = CONFIG_SYS_FLASH_SIZE >> PAGE_SHIFT, + .phys = (CONFIG_SYS_FLASH_BASE >> PAGE_SHIFT) + | MMU_VMR_CACHE_NONE, + }, { + /* Micron MT29F2G16AAD 256 MiB x16 NAND flash on NCS3 */ + .virt_pgno = EBI_SRAM_CS3_BASE >> PAGE_SHIFT, + .nr_pages = EBI_SRAM_CS3_SIZE >> PAGE_SHIFT, + .phys = (EBI_SRAM_CS3_BASE >> PAGE_SHIFT) + | MMU_VMR_CACHE_NONE, + }, { + /* 2x16-bit ISSI IS42S16320B 64 MiB SDRAM (128 MiB total) */ + .virt_pgno = CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT, + .nr_pages = EBI_SDRAM_SIZE >> PAGE_SHIFT, + .phys = (CONFIG_SYS_SDRAM_BASE >> PAGE_SHIFT) + | MMU_VMR_CACHE_WRBACK, + }, +}; + +static const struct sdram_config sdram_config = { + .data_bits = SDRAM_DATA_32BIT, + .row_bits = 13, + .col_bits = 10, + .bank_bits = 2, + .cas = 3, + .twr = 2, + .trc = 7, + .trp = 2, + .trcd = 2, + .tras = 5, + .txsr = 6, + /* 7.81 us */ + .refresh_period = (781 * (SDRAMC_BUS_HZ / 1000)) / 100000, +}; + +int board_early_init_f(void) +{ + /* Enable SDRAM in the EBI mux */ + hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE) + | HMATRIX_BIT(EBI_NAND_ENABLE)); + + portmux_enable_ebi(32, 23, PORTMUX_EBI_NAND, + PORTMUX_DRIVE_HIGH); + portmux_select_gpio(PORTMUX_PORT_E, 1 << 23, + PORTMUX_DIR_OUTPUT | PORTMUX_INIT_HIGH + | PORTMUX_DRIVE_MIN); + portmux_enable_usart1(PORTMUX_DRIVE_MIN); + +#if defined(CONFIG_MACB) + portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH); + portmux_enable_macb1(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH); +#endif +#if defined(CONFIG_MMC) + portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW); +#endif +#if defined(CONFIG_ATMEL_SPI) + portmux_enable_spi0(1 << 0, PORTMUX_DRIVE_LOW); +#endif + + return 0; +} + +phys_size_t initdram(int board_type) +{ + unsigned long expected_size; + unsigned long actual_size; + void *sdram_base; + + sdram_base = uncached(EBI_SDRAM_BASE); + + expected_size = sdram_init(sdram_base, &sdram_config); + actual_size = get_ram_size(sdram_base, expected_size); + + if (expected_size != actual_size) + printf("Warning: Only %lu of %lu MiB SDRAM is working\n", + actual_size >> 20, expected_size >> 20); + + return actual_size; +} + +int board_early_init_r(void) +{ + gd->bd->bi_phy_id[0] = 0x01; + gd->bd->bi_phy_id[1] = 0x03; + return 0; +} + +#ifdef CONFIG_CMD_NET +int board_eth_init(bd_t *bi) +{ + macb_eth_initialize(0, (void *)ATMEL_BASE_MACB0, bi->bi_phy_id[0]); + macb_eth_initialize(1, (void *)ATMEL_BASE_MACB1, bi->bi_phy_id[1]); + return 0; +} +#endif + +/* SPI chip select control */ +#ifdef CONFIG_ATMEL_SPI +#define ATNGW100_DATAFLASH_CS_PIN GPIO_PIN_PA(3) + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs == 0; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + gpio_set_value(ATNGW100_DATAFLASH_CS_PIN, 0); +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + gpio_set_value(ATNGW100_DATAFLASH_CS_PIN, 1); +} +#endif /* CONFIG_ATMEL_SPI */ diff --git a/board/avionic-design/common/tamonten.c b/board/avionic-design/common/tamonten.c index a0a4d1d..93f12ea 100644 --- a/board/avionic-design/common/tamonten.c +++ b/board/avionic-design/common/tamonten.c @@ -78,7 +78,7 @@ int board_mmc_init(bd_t *bd) pin_mux_mmc(); /* init dev 0, SD slot, with 4-bit bus */ - tegra20_mmc_init(0, 4, GPIO_PI6, GPIO_PH2); + tegra_mmc_init(0, 4, GPIO_PI6, GPIO_PH2); return 0; } diff --git a/board/avionic-design/dts/tegra20-tec.dts b/board/avionic-design/dts/tegra20-tec.dts index 9faebd8..bb3851b 100644 --- a/board/avionic-design/dts/tegra20-tec.dts +++ b/board/avionic-design/dts/tegra20-tec.dts @@ -55,4 +55,15 @@ usb@c5004000 { status = "disabled"; }; + + nand-controller@70008000 { + nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */ + nvidia,width = <8>; + nvidia,timing = <26 100 20 80 20 10 12 10 70>; + + nand@0 { + reg = <0>; + compatible = "hynix,hy27uf4g2b", "nand-flash"; + }; + }; }; diff --git a/board/buffalo/lsxl/lsxl.c b/board/buffalo/lsxl/lsxl.c index fe15511..b3f31d6 100644 --- a/board/buffalo/lsxl/lsxl.c +++ b/board/buffalo/lsxl/lsxl.c @@ -158,7 +158,7 @@ static void set_led(int state) { switch (state) { case LED_OFF: - __set_led(0, 0, 0, 0, 0, 0); + __set_led(0, 0, 0, 1, 1, 1); break; case LED_ALARM_ON: __set_led(0, 0, 0, 0, 1, 1); @@ -192,6 +192,25 @@ int board_init(void) } #ifdef CONFIG_MISC_INIT_R +static void check_power_switch(void) +{ + if (kw_gpio_get_value(GPIO_POWER_SWITCH)) { + /* turn off HDD and USB power */ + kw_gpio_set_value(GPIO_HDD_POWER, 0); + kw_gpio_set_value(GPIO_USB_VBUS, 0); + set_led(LED_OFF); + + /* loop until released */ + while (kw_gpio_get_value(GPIO_POWER_SWITCH)) + ; + + /* turn power on again */ + kw_gpio_set_value(GPIO_HDD_POWER, 1); + kw_gpio_set_value(GPIO_USB_VBUS, 1); + set_led(LED_POWER_BLINKING); + } +} + void check_enetaddr(void) { uchar enetaddr[6]; @@ -261,6 +280,7 @@ static void check_push_button(void) int misc_init_r(void) { + check_power_switch(); check_enetaddr(); check_push_button(); diff --git a/board/compal/paz00/paz00.c b/board/compal/paz00/paz00.c index cd684f2..0f8f167 100644 --- a/board/compal/paz00/paz00.c +++ b/board/compal/paz00/paz00.c @@ -70,11 +70,11 @@ int board_mmc_init(bd_t *bd) debug("board_mmc_init: init eMMC\n"); /* init dev 0, eMMC chip, with 4-bit bus */ /* The board has an 8-bit bus, but 8-bit doesn't work yet */ - tegra20_mmc_init(0, 4, -1, -1); + tegra_mmc_init(0, 4, -1, -1); debug("board_mmc_init: init SD slot\n"); /* init dev 3, SD slot, with 4-bit bus */ - tegra20_mmc_init(3, 4, GPIO_PV1, GPIO_PV5); + tegra_mmc_init(3, 4, GPIO_PV1, GPIO_PV5); return 0; } diff --git a/board/compulab/trimslice/trimslice.c b/board/compulab/trimslice/trimslice.c index 5dae15b..893cca8 100644 --- a/board/compulab/trimslice/trimslice.c +++ b/board/compulab/trimslice/trimslice.c @@ -69,10 +69,10 @@ int board_mmc_init(bd_t *bd) pin_mux_mmc(); /* init dev 0 (SDMMC4), (micro-SD slot) with 4-bit bus */ - tegra20_mmc_init(0, 4, -1, GPIO_PP1); + tegra_mmc_init(0, 4, -1, GPIO_PP1); /* init dev 3 (SDMMC1), (SD slot) with 4-bit bus */ - tegra20_mmc_init(3, 4, -1, -1); + tegra_mmc_init(3, 4, -1, -1); return 0; } diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile index 0b40dc7..54cb098 100644 --- a/board/freescale/common/Makefile +++ b/board/freescale/common/Makefile @@ -51,14 +51,12 @@ COBJS-$(CONFIG_MPC8572DS) += ics307_clk.o COBJS-$(CONFIG_P1022DS) += ics307_clk.o COBJS-$(CONFIG_P2020DS) += ics307_clk.o COBJS-$(CONFIG_P3041DS) += ics307_clk.o -COBJS-$(CONFIG_P3060QDS) += ics307_clk.o COBJS-$(CONFIG_P4080DS) += ics307_clk.o COBJS-$(CONFIG_P5020DS) += ics307_clk.o # deal with common files for P-series corenet based devices SUBLIB-$(CONFIG_P2041RDB) += p_corenet/libp_corenet.o SUBLIB-$(CONFIG_P3041DS) += p_corenet/libp_corenet.o -SUBLIB-$(CONFIG_P3060QDS) += p_corenet/libp_corenet.o SUBLIB-$(CONFIG_P4080DS) += p_corenet/libp_corenet.o SUBLIB-$(CONFIG_P5020DS) += p_corenet/libp_corenet.o diff --git a/board/freescale/common/fman.c b/board/freescale/common/fman.c index 6ddf816..3ef4936 100644 --- a/board/freescale/common/fman.c +++ b/board/freescale/common/fman.c @@ -25,6 +25,9 @@ #include <libfdt_env.h> #include <fdt_support.h> +#include <fm_eth.h> +#include <asm/fsl_serdes.h> + /* * Given the following ... * @@ -67,3 +70,31 @@ int fdt_set_phy_handle(void *fdt, char *compat, phys_addr_t addr, return fdt_setprop(fdt, offset, "phy-handle", &ph, sizeof(ph)); } + +/* + * Return the SerDes device enum for a given Fman port + * + * This function just maps the fm_port namespace to the srds_prtcl namespace. + */ +enum srds_prtcl serdes_device_from_fm_port(enum fm_port port) +{ + static const enum srds_prtcl srds_table[] = { + [FM1_DTSEC1] = SGMII_FM1_DTSEC1, + [FM1_DTSEC2] = SGMII_FM1_DTSEC2, + [FM1_DTSEC3] = SGMII_FM1_DTSEC3, + [FM1_DTSEC4] = SGMII_FM1_DTSEC4, + [FM1_DTSEC5] = SGMII_FM1_DTSEC5, + [FM1_10GEC1] = XAUI_FM1, + [FM2_DTSEC1] = SGMII_FM2_DTSEC1, + [FM2_DTSEC2] = SGMII_FM2_DTSEC2, + [FM2_DTSEC3] = SGMII_FM2_DTSEC3, + [FM2_DTSEC4] = SGMII_FM2_DTSEC4, + [FM2_DTSEC5] = SGMII_FM2_DTSEC5, + [FM2_10GEC1] = XAUI_FM2, + }; + + if ((port < FM1_DTSEC1) || (port > FM2_10GEC1)) + return NONE; + else + return srds_table[port]; +} diff --git a/board/freescale/common/fman.h b/board/freescale/common/fman.h index d39ef08..734b1da 100644 --- a/board/freescale/common/fman.h +++ b/board/freescale/common/fman.h @@ -23,4 +23,6 @@ int fdt_set_phy_handle(void *fdt, char *compat, phys_addr_t addr, const char *alias); +enum srds_prtcl serdes_device_from_fm_port(enum fm_port port); + #endif diff --git a/board/freescale/common/p_corenet/law.c b/board/freescale/common/p_corenet/law.c index c4566dd..09ef561 100644 --- a/board/freescale/common/p_corenet/law.c +++ b/board/freescale/common/p_corenet/law.c @@ -48,19 +48,6 @@ struct law_entry law_table[] = { #ifdef CONFIG_SYS_NAND_BASE_PHYS SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), #endif -#ifdef CONFIG_SRIOBOOT_SLAVE -#if defined(CONFIG_SRIOBOOT_SLAVE_PORT0) - SET_LAW(CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS, - LAW_SIZE_1M, LAW_TRGT_IF_RIO_1), - SET_LAW(CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS, - LAW_SIZE_1M, LAW_TRGT_IF_RIO_1), -#elif defined(CONFIG_SRIOBOOT_SLAVE_PORT1) - SET_LAW(CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS, - LAW_SIZE_1M, LAW_TRGT_IF_RIO_2), - SET_LAW(CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS, - LAW_SIZE_1M, LAW_TRGT_IF_RIO_2), -#endif -#endif }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/common/p_corenet/tlb.c b/board/freescale/common/p_corenet/tlb.c index da21627..e5cf208 100644 --- a/board/freescale/common/p_corenet/tlb.c +++ b/board/freescale/common/p_corenet/tlb.c @@ -66,13 +66,13 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 0, BOOKE_PAGESZ_1M, 1), -#elif defined(CONFIG_SRIOBOOT_SLAVE) +#elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) /* - * SRIOBOOT-SLAVE. When slave boot, the address of the + * SRIO_PCIE_BOOT-SLAVE. When slave boot, the address of the * space is at 0xfff00000, it covered the 0xfffff000. */ - SET_TLB_ENTRY(1, CONFIG_SYS_SRIOBOOT_SLAVE_ADDR, - CONFIG_SYS_SRIOBOOT_SLAVE_ADDR_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR, + CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_W|MAS2_G, 0, 0, BOOKE_PAGESZ_1M, 1), #else @@ -147,13 +147,13 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 16, BOOKE_PAGESZ_1M, 1), #endif -#ifdef CONFIG_SRIOBOOT_SLAVE +#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE /* - * SRIOBOOT-SLAVE. 1M space from 0xffe00000 for fetching ucode - * and ENV from master + * SRIO_PCIE_BOOT-SLAVE. 1M space from 0xffe00000 for + * fetching ucode and ENV from master */ - SET_TLB_ENTRY(1, CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR, - CONFIG_SYS_SRIOBOOT_UCODE_ENV_ADDR_PHYS, + SET_TLB_ENTRY(1, CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR, + CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_G, 0, 17, BOOKE_PAGESZ_1M, 1), #endif diff --git a/board/freescale/corenet_ds/eth_p4080.c b/board/freescale/corenet_ds/eth_p4080.c index b87b092..2c69c51 100644 --- a/board/freescale/corenet_ds/eth_p4080.c +++ b/board/freescale/corenet_ds/eth_p4080.c @@ -68,6 +68,15 @@ static char *mdio_names[16] = { NULL, NULL, NULL, }; +/* + * Mapping of all 18 SERDES lanes to board slots. A value of '0' here means + * that the mapping must be determined dynamically, or that the lane maps to + * something other than a board slot. + */ +static u8 lane_to_slot[] = { + 1, 1, 2, 2, 3, 3, 3, 3, 6, 6, 4, 4, 4, 4, 5, 5, 5, 5 +}; + static char *p4080ds_mdio_name_for_muxval(u32 muxval) { return mdio_names[(muxval & EMI_MASK) >> 28]; @@ -290,15 +299,6 @@ void fdt_fixup_board_enet(void *fdt) } } -enum board_slots { - SLOT1 = 1, - SLOT2, - SLOT3, - SLOT4, - SLOT5, - SLOT6, -}; - int board_eth_init(bd_t *bis) { #ifdef CONFIG_FMAN_ENET @@ -307,27 +307,6 @@ int board_eth_init(bd_t *bis) struct fsl_pq_mdio_info dtsec_mdio_info; struct tgec_mdio_info tgec_mdio_info; - u8 lane_to_slot[] = { - SLOT1, /* 0 - Bank 1:A */ - SLOT1, /* 1 - Bank 1:B */ - SLOT2, /* 2 - Bank 1:C */ - SLOT2, /* 3 - Bank 1:D */ - SLOT3, /* 4 - Bank 1:E */ - SLOT3, /* 5 - Bank 1:F */ - SLOT3, /* 6 - Bank 1:G */ - SLOT3, /* 7 - Bank 1:H */ - SLOT6, /* 8 - Bank 1:I */ - SLOT6, /* 9 - Bank 1:J */ - SLOT4, /* 10 - Bank 2:A */ - SLOT4, /* 11 - Bank 2:B */ - SLOT4, /* 12 - Bank 2:C */ - SLOT4, /* 13 - Bank 2:D */ - SLOT5, /* 14 - Bank 3:A */ - SLOT5, /* 15 - Bank 3:B */ - SLOT5, /* 16 - Bank 3:C */ - SLOT5, /* 17 - Bank 3:D */ - }; - /* Initialize the mdio_mux array so we can recognize empty elements */ for (i = 0; i < NUM_FM_PORTS; i++) mdio_mux[i] = EMI_NONE; @@ -380,17 +359,17 @@ int board_eth_init(bd_t *bis) break; slot = lane_to_slot[lane]; switch (slot) { - case SLOT3: + case 3: mdio_mux[i] = EMI1_SLOT3; fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); break; - case SLOT4: + case 4: mdio_mux[i] = EMI1_SLOT4; fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); break; - case SLOT5: + case 5: mdio_mux[i] = EMI1_SLOT5; fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); @@ -417,12 +396,12 @@ int board_eth_init(bd_t *bis) break; slot = lane_to_slot[lane]; switch (slot) { - case SLOT4: + case 4: mdio_mux[i] = EMI2_SLOT4; fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); break; - case SLOT5: + case 5: mdio_mux[i] = EMI2_SLOT5; fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); @@ -444,17 +423,17 @@ int board_eth_init(bd_t *bis) break; slot = lane_to_slot[lane]; switch (slot) { - case SLOT3: + case 3: mdio_mux[i] = EMI1_SLOT3; fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); break; - case SLOT4: + case 4: mdio_mux[i] = EMI1_SLOT4; fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); break; - case SLOT5: + case 5: mdio_mux[i] = EMI1_SLOT5; fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); @@ -481,12 +460,12 @@ int board_eth_init(bd_t *bis) break; slot = lane_to_slot[lane]; switch (slot) { - case SLOT4: + case 4: mdio_mux[i] = EMI2_SLOT4; fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); break; - case SLOT5: + case 5: mdio_mux[i] = EMI2_SLOT5; fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i])); diff --git a/board/freescale/corenet_ds/pbi.cfg b/board/freescale/corenet_ds/pbi.cfg new file mode 100644 index 0000000..50806ca --- /dev/null +++ b/board/freescale/corenet_ds/pbi.cfg @@ -0,0 +1,51 @@ +# +# Copyright 2012 Freescale Semiconductor, Inc. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, +# MA 02110-1301 USA +# +# Refer docs/README.pblimage for more details about how-to configure +# and create PBL boot image +# + +#PBI commands +#Initialize CPC1 as 1MB SRAM +09010000 00200400 +09138000 00000000 +091380c0 00000100 +09010100 00000000 +09010104 fff0000b +09010f00 08000000 +09010000 80000000 +#Configure LAW for CPC1 +09000d00 00000000 +09000d04 fff00000 +09000d08 81000013 +09000010 00000000 +09000014 ff000000 +09000018 81000000 +#Initialize eSPI controller, default configuration is slow for eSPI to +#load data, this configuration comes from u-boot eSPI driver. +09110000 80000403 +09110020 2d170008 +09110024 00100008 +09110028 00100008 +0911002c 00100008 +#Flush PBL data +09138000 00000000 +091380c0 00000000 diff --git a/board/freescale/corenet_ds/rcw_p3041ds.cfg b/board/freescale/corenet_ds/rcw_p3041ds.cfg new file mode 100644 index 0000000..8813156 --- /dev/null +++ b/board/freescale/corenet_ds/rcw_p3041ds.cfg @@ -0,0 +1,11 @@ +# +# Default RCW for P3041DS. +# + +#PBL preamble and RCW header +aa55aa55 010e0100 +#64 bytes RCW data +12600000 00000000 241C0000 00000000 +D8984A01 03002000 58000000 41000000 +00000000 00000000 00000000 10070000 +00000000 00000000 00000000 00000000 diff --git a/board/freescale/corenet_ds/rcw_p4080ds.cfg b/board/freescale/corenet_ds/rcw_p4080ds.cfg new file mode 100644 index 0000000..6a26339 --- /dev/null +++ b/board/freescale/corenet_ds/rcw_p4080ds.cfg @@ -0,0 +1,11 @@ +# +# Default RCW for P4080DS. +# + +#PBL preamble and RCW header +aa55aa55 010e0100 +#64 bytes RCW data +105a0000 00000000 1e1e181e 0000cccc +58400000 3c3c2000 58000000 e1000000 +00000000 00000000 00000000 008b6000 +00000000 00000000 00000000 00000000 diff --git a/board/freescale/corenet_ds/rcw_p5020ds.cfg b/board/freescale/corenet_ds/rcw_p5020ds.cfg new file mode 100644 index 0000000..b09e409 --- /dev/null +++ b/board/freescale/corenet_ds/rcw_p5020ds.cfg @@ -0,0 +1,11 @@ +# +# Default RCW for P5020DS. +# + +#PBL preamble and RCW header +aa55aa55 010e0100 +#64 bytes RCW data +0C540000 00000000 1E120000 00000000 +D8984A01 03002000 58000000 41000000 +00000000 00000000 00000000 10070000 +00000000 00000000 00000000 00000000 diff --git a/board/freescale/m5208evbe/m5208evbe.c b/board/freescale/m5208evbe/m5208evbe.c index 5f99e2f..355cfed 100644 --- a/board/freescale/m5208evbe/m5208evbe.c +++ b/board/freescale/m5208evbe/m5208evbe.c @@ -2,7 +2,7 @@ * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2008, 2012 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -27,6 +27,7 @@ #include <config.h> #include <common.h> #include <asm/immap.h> +#include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; @@ -39,7 +40,7 @@ int checkboard(void) phys_size_t initdram(int board_type) { - volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); + sdram_t *sdram = (sdram_t *)(MMAP_SDRAM); u32 dramsize, i; dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; @@ -50,34 +51,35 @@ phys_size_t initdram(int board_type) } i--; - sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i); + out_be32(&sdram->cs0, CONFIG_SYS_SDRAM_BASE | i); #ifdef CONFIG_SYS_SDRAM_BASE1 - sdram->cs1 = (CONFIG_SYS_SDRAM_BASE | i); + out_be32(&sdram->cs1, CONFIG_SYS_SDRAM_BASE | i); #endif - sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1; - sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2; + out_be32(&sdram->cfg1, CONFIG_SYS_SDRAM_CFG1); + out_be32(&sdram->cfg2, CONFIG_SYS_SDRAM_CFG2); udelay(500); /* Issue PALL */ - sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2); + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2); asm("nop"); /* Perform two refresh cycles */ - sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; - sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4); + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4); asm("nop"); /* Issue LEMR */ - sdram->mode = CONFIG_SYS_SDRAM_MODE; + out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE); asm("nop"); - sdram->mode = CONFIG_SYS_SDRAM_EMOD; + out_be32(&sdram->mode, CONFIG_SYS_SDRAM_EMOD); asm("nop"); - sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2); + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2); asm("nop"); - sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00; + out_be32(&sdram->ctrl, + (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00); asm("nop"); udelay(100); diff --git a/board/freescale/m52277evb/m52277evb.c b/board/freescale/m52277evb/m52277evb.c index 9109edb..a9bec58 100644 --- a/board/freescale/m52277evb/m52277evb.c +++ b/board/freescale/m52277evb/m52277evb.c @@ -2,7 +2,7 @@ * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -26,6 +26,7 @@ #include <common.h> #include <asm/immap.h> +#include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; @@ -47,8 +48,8 @@ phys_size_t initdram(int board_type) */ dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; #else - volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM); - volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO); + sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM); + gpio_t *gpio = (gpio_t *)(MMAP_GPIO); u32 i; dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; @@ -59,36 +60,37 @@ phys_size_t initdram(int board_type) } i--; - gpio->mscr_sdram = CONFIG_SYS_SDRAM_DRV_STRENGTH; + out_8(&gpio->mscr_sdram, CONFIG_SYS_SDRAM_DRV_STRENGTH); - sdram->sdcs0 = (CONFIG_SYS_SDRAM_BASE | i); + out_be32(&sdram->sdcs0, CONFIG_SYS_SDRAM_BASE | i); - sdram->sdcfg1 = CONFIG_SYS_SDRAM_CFG1; - sdram->sdcfg2 = CONFIG_SYS_SDRAM_CFG2; + out_be32(&sdram->sdcfg1, CONFIG_SYS_SDRAM_CFG1); + out_be32(&sdram->sdcfg2, CONFIG_SYS_SDRAM_CFG2); /* Issue PALL */ - sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2; + out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2); __asm__("nop"); /* Issue LEMR */ - sdram->sdmr = CONFIG_SYS_SDRAM_MODE; + out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE); __asm__("nop"); - sdram->sdmr = CONFIG_SYS_SDRAM_EMOD; + out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_EMOD); __asm__("nop"); udelay(1000); /* Issue PALL */ - sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2; + out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2); __asm__("nop"); /* Perform two refresh cycles */ - sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4; + out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4); __asm__("nop"); - sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4; + out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4); __asm__("nop"); - sdram->sdcr = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000C00; + out_be32(&sdram->sdcr, + (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00); udelay(100); #endif diff --git a/board/freescale/m5235evb/m5235evb.c b/board/freescale/m5235evb/m5235evb.c index b9e6126..e9a568e 100644 --- a/board/freescale/m5235evb/m5235evb.c +++ b/board/freescale/m5235evb/m5235evb.c @@ -2,7 +2,7 @@ * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -27,6 +27,7 @@ #include <config.h> #include <common.h> #include <asm/immap.h> +#include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; @@ -39,8 +40,8 @@ int checkboard(void) phys_size_t initdram(int board_type) { - volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); - volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO); + sdram_t *sdram = (sdram_t *)(MMAP_SDRAM); + gpio_t *gpio = (gpio_t *)(MMAP_GPIO); u32 dramsize, i, dramclk; /* @@ -48,14 +49,15 @@ phys_size_t initdram(int board_type) * the port-size of SDRAM. In this case it is necessary to enable * Data[15:0] on Port Address/Data. */ - gpio->par_ad = - GPIO_PAR_AD_ADDR23 | GPIO_PAR_AD_ADDR22 | GPIO_PAR_AD_ADDR21 | - GPIO_PAR_AD_DATAL; + out_8(&gpio->par_ad, + GPIO_PAR_AD_ADDR23 | GPIO_PAR_AD_ADDR22 | GPIO_PAR_AD_ADDR21 | + GPIO_PAR_AD_DATAL); /* Initialize PAR to enable SDRAM signals */ - gpio->par_sdram = - GPIO_PAR_SDRAM_SDWE | GPIO_PAR_SDRAM_SCAS | GPIO_PAR_SDRAM_SRAS | - GPIO_PAR_SDRAM_SCKE | GPIO_PAR_SDRAM_SDCS(3); + out_8(&gpio->par_sdram, + GPIO_PAR_SDRAM_SDWE | GPIO_PAR_SDRAM_SCAS | + GPIO_PAR_SDRAM_SRAS | GPIO_PAR_SDRAM_SCKE | + GPIO_PAR_SDRAM_SDCS(3)); dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; for (i = 0x13; i < 0x20; i++) { @@ -64,25 +66,28 @@ phys_size_t initdram(int board_type) } i--; - if (!(sdram->dacr0 & SDRAMC_DARCn_RE)) { + if (!(in_be32(&sdram->dacr0) & SDRAMC_DARCn_RE)) { dramclk = gd->bus_clk / (CONFIG_SYS_HZ * CONFIG_SYS_HZ); /* Initialize DRAM Control Register: DCR */ - sdram->dcr = SDRAMC_DCR_RTIM_9CLKS | - SDRAMC_DCR_RTIM_6CLKS | SDRAMC_DCR_RC((15 * dramclk) >> 4); + out_be16(&sdram->dcr, SDRAMC_DCR_RTIM_9CLKS | + SDRAMC_DCR_RTIM_6CLKS | + SDRAMC_DCR_RC((15 * dramclk) >> 4)); /* Initialize DACR0 */ - sdram->dacr0 = - SDRAMC_DARCn_BA(CONFIG_SYS_SDRAM_BASE) | SDRAMC_DARCn_CASL_C1 | - SDRAMC_DARCn_CBM_CMD20 | SDRAMC_DARCn_PS_32; + out_be32(&sdram->dacr0, + SDRAMC_DARCn_BA(CONFIG_SYS_SDRAM_BASE) | + SDRAMC_DARCn_CASL_C1 | SDRAMC_DARCn_CBM_CMD20 | + SDRAMC_DARCn_PS_32); asm("nop"); /* Initialize DMR0 */ - sdram->dmr0 = ((dramsize - 1) & 0xFFFC0000) | SDRAMC_DMRn_V; + out_be32(&sdram->dmr0, + ((dramsize - 1) & 0xFFFC0000) | SDRAMC_DMRn_V); asm("nop"); /* Set IP (bit 3) in DACR */ - sdram->dacr0 |= SDRAMC_DARCn_IP; + setbits_be32(&sdram->dacr0, SDRAMC_DARCn_IP); /* Wait 30ns to allow banks to precharge */ for (i = 0; i < 5; i++) { @@ -93,7 +98,7 @@ phys_size_t initdram(int board_type) *(u32 *) (CONFIG_SYS_SDRAM_BASE) = 0xA5A59696; /* Set RE (bit 15) in DACR */ - sdram->dacr0 |= SDRAMC_DARCn_RE; + setbits_be32(&sdram->dacr0, SDRAMC_DARCn_RE); /* Wait for at least 8 auto refresh cycles to occur */ for (i = 0; i < 0x2000; i++) { @@ -101,7 +106,7 @@ phys_size_t initdram(int board_type) } /* Finish the configuration by issuing the MRS. */ - sdram->dacr0 |= SDRAMC_DARCn_IMRS; + setbits_be32(&sdram->dacr0, SDRAMC_DARCn_IMRS); asm("nop"); /* Write to the SDRAM Mode Register */ diff --git a/board/freescale/m5253demo/m5253demo.c b/board/freescale/m5253demo/m5253demo.c index 8ffb2cc..052993d 100644 --- a/board/freescale/m5253demo/m5253demo.c +++ b/board/freescale/m5253demo/m5253demo.c @@ -2,7 +2,7 @@ * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. * Hayden Fraser (Hayden.Fraser@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -109,7 +109,7 @@ int ide_preinit(void) void ide_set_reset(int idereset) { - volatile atac_t *ata = (atac_t *) CONFIG_SYS_ATA_BASE_ADDR; + atac_t *ata = (atac_t *) CONFIG_SYS_ATA_BASE_ADDR; long period; /* t1, t2, t3, t4, t5, t6, t9, tRD, tA */ int piotms[5][9] = { {70, 165, 60, 30, 50, 5, 20, 0, 35}, /* PIO 0 */ @@ -120,7 +120,8 @@ void ide_set_reset(int idereset) }; if (idereset) { - ata->cr = 0; /* control reset */ + /* control reset */ + out_8(&ata->cr, 0); udelay(100); } else { mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND); @@ -129,17 +130,19 @@ void ide_set_reset(int idereset) period = 1000000000 / (CONFIG_SYS_CLK / 2); /* period in ns */ /*ata->ton = CALC_TIMING (180); */ - ata->t1 = CALC_TIMING(piotms[2][0]); - ata->t2w = CALC_TIMING(piotms[2][1]); - ata->t2r = CALC_TIMING(piotms[2][1]); - ata->ta = CALC_TIMING(piotms[2][8]); - ata->trd = CALC_TIMING(piotms[2][7]); - ata->t4 = CALC_TIMING(piotms[2][3]); - ata->t9 = CALC_TIMING(piotms[2][6]); - - ata->cr = 0x40; /* IORDY enable */ + out_8(&ata->t1, CALC_TIMING(piotms[2][0])); + out_8(&ata->t2w, CALC_TIMING(piotms[2][1])); + out_8(&ata->t2r, CALC_TIMING(piotms[2][1])); + out_8(&ata->ta, CALC_TIMING(piotms[2][8])); + out_8(&ata->trd, CALC_TIMING(piotms[2][7])); + out_8(&ata->t4, CALC_TIMING(piotms[2][3])); + out_8(&ata->t9, CALC_TIMING(piotms[2][6])); + + /* IORDY enable */ + out_8(&ata->cr, 0x40); udelay(2000); - ata->cr |= 0x01; /* IORDY enable */ + /* IORDY enable */ + setbits_8(&ata->cr, 0x01); } } #endif /* CONFIG_CMD_IDE */ diff --git a/board/freescale/m5253evbe/m5253evbe.c b/board/freescale/m5253evbe/m5253evbe.c index ae69f67..658748b 100644 --- a/board/freescale/m5253evbe/m5253evbe.c +++ b/board/freescale/m5253evbe/m5253evbe.c @@ -2,7 +2,7 @@ * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. * Hayden Fraser (Hayden.Fraser@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -26,6 +26,7 @@ #include <common.h> #include <asm/immap.h> +#include <asm/io.h> int checkboard(void) { @@ -101,7 +102,7 @@ int ide_preinit(void) void ide_set_reset(int idereset) { - volatile atac_t *ata = (atac_t *) CONFIG_SYS_ATA_BASE_ADDR; + atac_t *ata = (atac_t *) CONFIG_SYS_ATA_BASE_ADDR; long period; /* t1, t2, t3, t4, t5, t6, t9, tRD, tA */ int piotms[5][9] = { {70, 165, 60, 30, 50, 5, 20, 0, 35}, /* PIO 0 */ @@ -112,7 +113,8 @@ void ide_set_reset(int idereset) }; if (idereset) { - ata->cr = 0; /* control reset */ + /* control reset */ + out_8(&ata->cr, 0); udelay(100); } else { mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND); @@ -121,17 +123,19 @@ void ide_set_reset(int idereset) period = 1000000000 / (CONFIG_SYS_CLK / 2); /* period in ns */ /*ata->ton = CALC_TIMING (180); */ - ata->t1 = CALC_TIMING(piotms[2][0]); - ata->t2w = CALC_TIMING(piotms[2][1]); - ata->t2r = CALC_TIMING(piotms[2][1]); - ata->ta = CALC_TIMING(piotms[2][8]); - ata->trd = CALC_TIMING(piotms[2][7]); - ata->t4 = CALC_TIMING(piotms[2][3]); - ata->t9 = CALC_TIMING(piotms[2][6]); - - ata->cr = 0x40; /* IORDY enable */ + out_8(&ata->t1, CALC_TIMING(piotms[2][0])); + out_8(&ata->t2w, CALC_TIMING(piotms[2][1])); + out_8(&ata->t2r, CALC_TIMING(piotms[2][1])); + out_8(&ata->ta, CALC_TIMING(piotms[2][8])); + out_8(&ata->trd, CALC_TIMING(piotms[2][7])); + out_8(&ata->t4, CALC_TIMING(piotms[2][3])); + out_8(&ata->t9, CALC_TIMING(piotms[2][6])); + + /* IORDY enable */ + out_8(&ata->cr, 0x40); udelay(2000); - ata->cr |= 0x01; /* IORDY enable */ + /* IORDY enable */ + setbits_8(&ata->cr, 0x01); } } #endif /* CONFIG_CMD_IDE */ diff --git a/board/freescale/m5272c3/m5272c3.c b/board/freescale/m5272c3/m5272c3.c index 902ca3a..c3160ce 100644 --- a/board/freescale/m5272c3/m5272c3.c +++ b/board/freescale/m5272c3/m5272c3.c @@ -2,6 +2,8 @@ * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * + * Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved. + * * See file CREDITS for list of people who contributed to this * project. * @@ -23,6 +25,7 @@ #include <common.h> #include <asm/immap.h> +#include <asm/io.h> int checkboard (void) { @@ -32,10 +35,10 @@ int checkboard (void) { }; phys_size_t initdram (int board_type) { - volatile sdramctrl_t * sdp = (sdramctrl_t *)(MMAP_SDRAM); + sdramctrl_t * sdp = (sdramctrl_t *)(MMAP_SDRAM); - sdp->sdram_sdtr = 0xf539; - sdp->sdram_sdcr = 0x4211; + out_be16(&sdp->sdram_sdtr, 0xf539); + out_be16(&sdp->sdram_sdcr, 0x4211); /* Dummy write to start SDRAM */ *((volatile unsigned long *)0) = 0; diff --git a/board/freescale/m5275evb/m5275evb.c b/board/freescale/m5275evb/m5275evb.c index 35c9b20..1bbe5a3 100644 --- a/board/freescale/m5275evb/m5275evb.c +++ b/board/freescale/m5275evb/m5275evb.c @@ -4,6 +4,8 @@ * * Copyright (C) 2005-2008 Arthur Shipkowski (art@videon-central.com) * + * Copyright (C) 2012 Freescale Semiconductor, Inc. All Rights Reserved. + * * See file CREDITS for list of people who contributed to this * project. * @@ -25,6 +27,7 @@ #include <common.h> #include <asm/immap.h> +#include <asm/io.h> #define PERIOD 13 /* system bus period in ns */ #define SDRAM_TREFI 7800 /* in ns */ @@ -38,67 +41,68 @@ int checkboard(void) phys_size_t initdram(int board_type) { - volatile sdramctrl_t *sdp = (sdramctrl_t *)(MMAP_SDRAM); - volatile gpio_t *gpio_reg = (gpio_t *)(MMAP_GPIO); + sdramctrl_t *sdp = (sdramctrl_t *)(MMAP_SDRAM); + gpio_t *gpio_reg = (gpio_t *)(MMAP_GPIO); - gpio_reg->par_sdram = 0x3FF; /* Enable SDRAM */ + /* Enable SDRAM */ + out_be16(&gpio_reg->par_sdram, 0x3FF); /* Set up chip select */ - sdp->sdbar0 = CONFIG_SYS_SDRAM_BASE; - sdp->sdbmr0 = MCF_SDRAMC_SDMRn_BAM_32M | MCF_SDRAMC_SDMRn_V; + out_be32(&sdp->sdbar0, CONFIG_SYS_SDRAM_BASE); + out_be32(&sdp->sdbmr0, MCF_SDRAMC_SDMRn_BAM_32M | MCF_SDRAMC_SDMRn_V); /* Set up timing */ - sdp->sdcfg1 = 0x83711630; - sdp->sdcfg2 = 0x46770000; + out_be32(&sdp->sdcfg1, 0x83711630); + out_be32(&sdp->sdcfg2, 0x46770000); /* Enable clock */ - sdp->sdcr = MCF_SDRAMC_SDCR_MODE_EN | MCF_SDRAMC_SDCR_CKE; + out_be32(&sdp->sdcr, MCF_SDRAMC_SDCR_MODE_EN | MCF_SDRAMC_SDCR_CKE); /* Set precharge */ - sdp->sdcr |= MCF_SDRAMC_SDCR_IPALL; + setbits_be32(&sdp->sdcr, MCF_SDRAMC_SDCR_IPALL); /* Dummy write to start SDRAM */ *((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696; /* Send LEMR */ - sdp->sdmr = MCF_SDRAMC_SDMR_BNKAD_LEMR - | MCF_SDRAMC_SDMR_AD(0x0) - | MCF_SDRAMC_SDMR_CMD; + setbits_be32(&sdp->sdmr, + MCF_SDRAMC_SDMR_BNKAD_LEMR | MCF_SDRAMC_SDMR_AD(0x0) | + MCF_SDRAMC_SDMR_CMD); *((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696; /* Send LMR */ - sdp->sdmr = 0x058d0000; + out_be32(&sdp->sdmr, 0x058d0000); *((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696; /* Stop sending commands */ - sdp->sdmr &= ~(MCF_SDRAMC_SDMR_CMD); + clrbits_be32(&sdp->sdmr, MCF_SDRAMC_SDMR_CMD); /* Set precharge */ - sdp->sdcr |= MCF_SDRAMC_SDCR_IPALL; + setbits_be32(&sdp->sdcr, MCF_SDRAMC_SDCR_IPALL); *((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696; /* Stop manual precharge, send 2 IREF */ - sdp->sdcr &= ~(MCF_SDRAMC_SDCR_IPALL); - sdp->sdcr |= MCF_SDRAMC_SDCR_IREF; + clrbits_be32(&sdp->sdcr, MCF_SDRAMC_SDCR_IPALL); + setbits_be32(&sdp->sdcr, MCF_SDRAMC_SDCR_IREF); *((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696; *((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696; - /* Write mode register, clear reset DLL */ - sdp->sdmr = 0x018d0000; + + out_be32(&sdp->sdmr, 0x018d0000); *((volatile unsigned long *)CONFIG_SYS_SDRAM_BASE) = 0xa5a59696; /* Stop sending commands */ - sdp->sdmr &= ~(MCF_SDRAMC_SDMR_CMD); - sdp->sdcr &= ~(MCF_SDRAMC_SDCR_MODE_EN); + clrbits_be32(&sdp->sdmr, MCF_SDRAMC_SDMR_CMD); + clrbits_be32(&sdp->sdcr, MCF_SDRAMC_SDCR_MODE_EN); /* Turn on auto refresh, lock SDMR */ - sdp->sdcr = + out_be32(&sdp->sdcr, MCF_SDRAMC_SDCR_CKE | MCF_SDRAMC_SDCR_REF | MCF_SDRAMC_SDCR_MUX(1) /* 1 added to round up */ | MCF_SDRAMC_SDCR_RCNT((SDRAM_TREFI/(PERIOD*64)) - 1 + 1) - | MCF_SDRAMC_SDCR_DQS_OE(0x3); + | MCF_SDRAMC_SDCR_DQS_OE(0x3)); return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; }; diff --git a/board/freescale/m53017evb/m53017evb.c b/board/freescale/m53017evb/m53017evb.c index f331786..142485f 100644 --- a/board/freescale/m53017evb/m53017evb.c +++ b/board/freescale/m53017evb/m53017evb.c @@ -2,7 +2,7 @@ * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2008, 2012 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -27,6 +27,7 @@ #include <config.h> #include <common.h> #include <asm/immap.h> +#include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; @@ -39,7 +40,7 @@ int checkboard(void) phys_size_t initdram(int board_type) { - volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); + sdram_t *sdram = (sdram_t *)(MMAP_SDRAM); u32 dramsize, i; dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; @@ -50,34 +51,35 @@ phys_size_t initdram(int board_type) } i--; - sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i); + out_be32(&sdram->cs0, CONFIG_SYS_SDRAM_BASE | i); #ifdef CONFIG_SYS_SDRAM_BASE1 - sdram->cs1 = (CONFIG_SYS_SDRAM_BASE | i); + out_be32(&sdram->cs1, CONFIG_SYS_SDRAM_BASE | i); #endif - sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1; - sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2; + out_be32(&sdram->cfg1, CONFIG_SYS_SDRAM_CFG1); + out_be32(&sdram->cfg2, CONFIG_SYS_SDRAM_CFG2); udelay(500); /* Issue PALL */ - sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2); + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2); asm("nop"); /* Perform two refresh cycles */ - sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; - sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4); + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4); asm("nop"); /* Issue LEMR */ - sdram->mode = CONFIG_SYS_SDRAM_MODE; + out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE); asm("nop"); - sdram->mode = CONFIG_SYS_SDRAM_EMOD; + out_be32(&sdram->mode, CONFIG_SYS_SDRAM_EMOD); asm("nop"); - sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2); + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2); asm("nop"); - sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00; + out_be32(&sdram->ctrl, + (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00); asm("nop"); udelay(100); diff --git a/board/freescale/m5329evb/m5329evb.c b/board/freescale/m5329evb/m5329evb.c index b4df22f..1c14b83 100644 --- a/board/freescale/m5329evb/m5329evb.c +++ b/board/freescale/m5329evb/m5329evb.c @@ -2,7 +2,7 @@ * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -27,6 +27,7 @@ #include <config.h> #include <common.h> #include <asm/immap.h> +#include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; @@ -39,7 +40,7 @@ int checkboard(void) phys_size_t initdram(int board_type) { - volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); + sdram_t *sdram = (sdram_t *)(MMAP_SDRAM); u32 dramsize, i; dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; @@ -50,29 +51,30 @@ phys_size_t initdram(int board_type) } i--; - sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i); - sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1; - sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2; + out_be32(&sdram->cs0, CONFIG_SYS_SDRAM_BASE | i); + out_be32(&sdram->cfg1, CONFIG_SYS_SDRAM_CFG1); + out_be32(&sdram->cfg2, CONFIG_SYS_SDRAM_CFG2); /* Issue PALL */ - sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 2; + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2); /* Issue LEMR */ - sdram->mode = CONFIG_SYS_SDRAM_EMOD; - sdram->mode = (CONFIG_SYS_SDRAM_MODE | 0x04000000); + out_be32(&sdram->mode, CONFIG_SYS_SDRAM_EMOD); + out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE | 0x04000000); udelay(500); /* Issue PALL */ - sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2); + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2); /* Perform two refresh cycles */ - sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; - sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4); + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4); - sdram->mode = CONFIG_SYS_SDRAM_MODE; + out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE); - sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00; + out_be32(&sdram->ctrl, + (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00); udelay(100); diff --git a/board/freescale/m5329evb/nand.c b/board/freescale/m5329evb/nand.c index 16025f9..c70c98c 100644 --- a/board/freescale/m5329evb/nand.c +++ b/board/freescale/m5329evb/nand.c @@ -2,7 +2,7 @@ * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -67,18 +67,18 @@ static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl) int board_nand_init(struct nand_chip *nand) { - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; + gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* * set up pin configuration - enabled 2nd output buffer's signals * (nand_ngpio - nCE USB1/2_PWR_EN, LATCH_GPIOs, LCD_VEEEN, etc) * to use nCE signal */ - gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3; - gpio->pddr_timer |= 0x08; - gpio->ppd_timer |= 0x08; - gpio->pclrr_timer = 0; - gpio->podr_timer = 0; + clrbits_8(&gpio->par_timer, GPIO_PAR_TIN3_TIN3); + setbits_8(&gpio->pddr_timer, 0x08); + setbits_8(&gpio->ppd_timer, 0x08); + out_8(&gpio->pclrr_timer, 0); + out_8(&gpio->podr_timer, 0); nand->chip_delay = 60; nand->ecc.mode = NAND_ECC_SOFT; diff --git a/board/freescale/m5373evb/m5373evb.c b/board/freescale/m5373evb/m5373evb.c index 376de4b..8eb3512 100644 --- a/board/freescale/m5373evb/m5373evb.c +++ b/board/freescale/m5373evb/m5373evb.c @@ -2,7 +2,7 @@ * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -27,6 +27,7 @@ #include <config.h> #include <common.h> #include <asm/immap.h> +#include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; @@ -39,7 +40,7 @@ int checkboard(void) phys_size_t initdram(int board_type) { - volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); + sdram_t *sdram = (sdram_t *)(MMAP_SDRAM); u32 dramsize, i; dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; @@ -50,29 +51,30 @@ phys_size_t initdram(int board_type) } i--; - sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i); - sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1; - sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2; + out_be32(&sdram->cs0, CONFIG_SYS_SDRAM_BASE | i); + out_be32(&sdram->cfg1, CONFIG_SYS_SDRAM_CFG1); + out_be32(&sdram->cfg2, CONFIG_SYS_SDRAM_CFG2); /* Issue PALL */ - sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 2; + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2); /* Issue LEMR */ - sdram->mode = CONFIG_SYS_SDRAM_EMOD; - sdram->mode = (CONFIG_SYS_SDRAM_MODE | 0x04000000); + out_be32(&sdram->mode, CONFIG_SYS_SDRAM_EMOD); + out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE | 0x04000000); udelay(500); /* Issue PALL */ - sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2); + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2); /* Perform two refresh cycles */ - sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; - sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4); + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4); - sdram->mode = CONFIG_SYS_SDRAM_MODE; + out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE); - sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00; + out_be32(&sdram->ctrl, + (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00); udelay(100); diff --git a/board/freescale/m5373evb/nand.c b/board/freescale/m5373evb/nand.c index df8c03b..ed79e39 100644 --- a/board/freescale/m5373evb/nand.c +++ b/board/freescale/m5373evb/nand.c @@ -2,7 +2,7 @@ * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -68,21 +68,21 @@ static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl) int board_nand_init(struct nand_chip *nand) { - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; + gpio_t *gpio = (gpio_t *) MMAP_GPIO; + fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; - fbcs->csmr2 &= ~FBCS_CSMR_WP; + clrbits_be32(&fbcs->csmr2, FBCS_CSMR_WP); /* * set up pin configuration - enabled 2nd output buffer's signals * (nand_ngpio - nCE USB1/2_PWR_EN, LATCH_GPIOs, LCD_VEEEN, etc) * to use nCE signal */ - gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3; - gpio->pddr_timer |= 0x08; - gpio->ppd_timer |= 0x08; - gpio->pclrr_timer = 0; - gpio->podr_timer = 0; + clrbits_8(&gpio->par_timer, GPIO_PAR_TIN3_TIN3); + setbits_8(&gpio->pddr_timer, 0x08); + setbits_8(&gpio->ppd_timer, 0x08); + out_8(&gpio->pclrr_timer, 0); + out_8(&gpio->podr_timer, 0); nand->chip_delay = 60; nand->ecc.mode = NAND_ECC_SOFT; diff --git a/board/freescale/m54451evb/m54451evb.c b/board/freescale/m54451evb/m54451evb.c index 088c8c4..32a9374 100644 --- a/board/freescale/m54451evb/m54451evb.c +++ b/board/freescale/m54451evb/m54451evb.c @@ -2,7 +2,7 @@ * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2008, 2012 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -27,6 +27,7 @@ #include <common.h> #include <spi.h> #include <asm/immap.h> +#include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; @@ -51,14 +52,14 @@ phys_size_t initdram(int board_type) */ dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; #else - volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM); - volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO); + sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM); + gpio_t *gpio = (gpio_t *)(MMAP_GPIO); u32 i; dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000; - if ((sdram->sdcfg1 == CONFIG_SYS_SDRAM_CFG1) && - (sdram->sdcfg2 == CONFIG_SYS_SDRAM_CFG2)) + if ((in_be32(&sdram->sdcfg1) == CONFIG_SYS_SDRAM_CFG1) && + (in_be32(&sdram->sdcfg2) == CONFIG_SYS_SDRAM_CFG2)) return dramsize; for (i = 0x13; i < 0x20; i++) { @@ -67,32 +68,33 @@ phys_size_t initdram(int board_type) } i--; - gpio->mscr_sdram = CONFIG_SYS_SDRAM_DRV_STRENGTH; + out_8(&gpio->mscr_sdram, CONFIG_SYS_SDRAM_DRV_STRENGTH); - sdram->sdcs0 = (CONFIG_SYS_SDRAM_BASE | i); + out_be32(&sdram->sdcs0, CONFIG_SYS_SDRAM_BASE | i); - sdram->sdcfg1 = CONFIG_SYS_SDRAM_CFG1; - sdram->sdcfg2 = CONFIG_SYS_SDRAM_CFG2; + out_be32(&sdram->sdcfg1, CONFIG_SYS_SDRAM_CFG1); + out_be32(&sdram->sdcfg2, CONFIG_SYS_SDRAM_CFG2); udelay(200); /* Issue PALL */ - sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2; + out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2); __asm__("nop"); /* Perform two refresh cycles */ - sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4; + out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4); __asm__("nop"); - sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4; + out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4); __asm__("nop"); /* Issue LEMR */ - sdram->sdmr = CONFIG_SYS_SDRAM_MODE; + out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE); __asm__("nop"); - sdram->sdmr = CONFIG_SYS_SDRAM_EMOD; + out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE); __asm__("nop"); - sdram->sdcr = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000000; + out_be32(&sdram->sdcr, + (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000000); udelay(100); #endif diff --git a/board/freescale/m54455evb/m54455evb.c b/board/freescale/m54455evb/m54455evb.c index 2a84514..0ca268e 100644 --- a/board/freescale/m54455evb/m54455evb.c +++ b/board/freescale/m54455evb/m54455evb.c @@ -2,7 +2,7 @@ * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -27,6 +27,7 @@ #include <common.h> #include <pci.h> #include <asm/immap.h> +#include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; @@ -47,8 +48,8 @@ phys_size_t initdram(int board_type) */ dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000 >> 1; #else - volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM); - volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO); + sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM); + gpio_t *gpio = (gpio_t *)(MMAP_GPIO); u32 i; dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000 >> 1; @@ -59,33 +60,34 @@ phys_size_t initdram(int board_type) } i--; - gpio->mscr_sdram = CONFIG_SYS_SDRAM_DRV_STRENGTH; + out_8(&gpio->mscr_sdram, CONFIG_SYS_SDRAM_DRV_STRENGTH); - sdram->sdcs0 = (CONFIG_SYS_SDRAM_BASE | i); - sdram->sdcs1 = (CONFIG_SYS_SDRAM_BASE1 | i); + out_be32(&sdram->sdcs0, CONFIG_SYS_SDRAM_BASE | i); + out_be32(&sdram->sdcs1, CONFIG_SYS_SDRAM_BASE1 | i); - sdram->sdcfg1 = CONFIG_SYS_SDRAM_CFG1; - sdram->sdcfg2 = CONFIG_SYS_SDRAM_CFG2; + out_be32(&sdram->sdcfg1, CONFIG_SYS_SDRAM_CFG1); + out_be32(&sdram->sdcfg2, CONFIG_SYS_SDRAM_CFG2); /* Issue PALL */ - sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2; + out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2); /* Issue LEMR */ - sdram->sdmr = CONFIG_SYS_SDRAM_EMOD | 0x408; - sdram->sdmr = CONFIG_SYS_SDRAM_MODE | 0x300; + out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_EMOD | 0x408); + out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE | 0x300); udelay(500); /* Issue PALL */ - sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2; + out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 2); /* Perform two refresh cycles */ - sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4; - sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4; + out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4); + out_be32(&sdram->sdcr, CONFIG_SYS_SDRAM_CTRL | 4); - sdram->sdmr = CONFIG_SYS_SDRAM_MODE | 0x200; + out_be32(&sdram->sdmr, CONFIG_SYS_SDRAM_MODE | 0x200); - sdram->sdcr = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00; + out_be32(&sdram->sdcr, + (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00); udelay(100); #endif @@ -105,26 +107,29 @@ int testdram(void) int ide_preinit(void) { - volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; - - gpio->par_fec |= (gpio->par_fec & GPIO_PAR_FEC_FEC1_UNMASK) | 0x10; - gpio->par_feci2c |= - (gpio->par_feci2c & 0xF0FF) | (GPIO_PAR_FECI2C_MDC1_ATA_DIOR | - GPIO_PAR_FECI2C_MDIO1_ATA_DIOW); - gpio->par_ata |= - (GPIO_PAR_ATA_BUFEN | GPIO_PAR_ATA_CS1 | GPIO_PAR_ATA_CS0 | - GPIO_PAR_ATA_DA2 | GPIO_PAR_ATA_DA1 | GPIO_PAR_ATA_DA0 - | GPIO_PAR_ATA_RESET_RESET | GPIO_PAR_ATA_DMARQ_DMARQ | - GPIO_PAR_ATA_IORDY_IORDY); - gpio->par_pci |= - (GPIO_PAR_PCI_GNT3_ATA_DMACK | GPIO_PAR_PCI_REQ3_ATA_INTRQ); + gpio_t *gpio = (gpio_t *) MMAP_GPIO; + u32 tmp; + + tmp = (in_8(&gpio->par_fec) & GPIO_PAR_FEC_FEC1_UNMASK) | 0x10; + setbits_8(&gpio->par_fec, tmp); + tmp = ((in_be16(&gpio->par_feci2c) & 0xf0ff) | + (GPIO_PAR_FECI2C_MDC1_ATA_DIOR | GPIO_PAR_FECI2C_MDIO1_ATA_DIOW)); + setbits_be16(&gpio->par_feci2c, tmp); + + setbits_be16(&gpio->par_ata, + GPIO_PAR_ATA_BUFEN | GPIO_PAR_ATA_CS1 | GPIO_PAR_ATA_CS0 | + GPIO_PAR_ATA_DA2 | GPIO_PAR_ATA_DA1 | GPIO_PAR_ATA_DA0 | + GPIO_PAR_ATA_RESET_RESET | GPIO_PAR_ATA_DMARQ_DMARQ | + GPIO_PAR_ATA_IORDY_IORDY); + setbits_be16(&gpio->par_pci, + GPIO_PAR_PCI_GNT3_ATA_DMACK | GPIO_PAR_PCI_REQ3_ATA_INTRQ); return (0); } void ide_set_reset(int idereset) { - volatile atac_t *ata = (atac_t *) MMAP_ATA; + atac_t *ata = (atac_t *) MMAP_ATA; long period; /* t1, t2, t3, t4, t5, t6, t9, tRD, tA */ int piotms[5][9] = { @@ -136,24 +141,27 @@ void ide_set_reset(int idereset) }; /* PIO 4 */ if (idereset) { - ata->cr = 0; /* control reset */ + /* control reset */ + out_8(&ata->cr, 0); udelay(10000); } else { #define CALC_TIMING(t) (t + period - 1) / period period = 1000000000 / gd->bus_clk; /* period in ns */ /*ata->ton = CALC_TIMING (180); */ - ata->t1 = CALC_TIMING(piotms[2][0]); - ata->t2w = CALC_TIMING(piotms[2][1]); - ata->t2r = CALC_TIMING(piotms[2][1]); - ata->ta = CALC_TIMING(piotms[2][8]); - ata->trd = CALC_TIMING(piotms[2][7]); - ata->t4 = CALC_TIMING(piotms[2][3]); - ata->t9 = CALC_TIMING(piotms[2][6]); - - ata->cr = 0x40; /* IORDY enable */ + out_8(&ata->t1, CALC_TIMING(piotms[2][0])); + out_8(&ata->t2w, CALC_TIMING(piotms[2][1])); + out_8(&ata->t2r, CALC_TIMING(piotms[2][1])); + out_8(&ata->ta, CALC_TIMING(piotms[2][8])); + out_8(&ata->trd, CALC_TIMING(piotms[2][7])); + out_8(&ata->t4, CALC_TIMING(piotms[2][3])); + out_8(&ata->t9, CALC_TIMING(piotms[2][6])); + + /* IORDY enable */ + out_8(&ata->cr, 0x40); udelay(200000); - ata->cr |= 0x01; /* IORDY enable */ + /* IORDY enable */ + setbits_8(&ata->cr, 0x01); } } #endif diff --git a/board/freescale/m547xevb/m547xevb.c b/board/freescale/m547xevb/m547xevb.c index 9f1ec38..fd9bddd 100644 --- a/board/freescale/m547xevb/m547xevb.c +++ b/board/freescale/m547xevb/m547xevb.c @@ -2,7 +2,7 @@ * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -28,6 +28,7 @@ #include <common.h> #include <pci.h> #include <asm/immap.h> +#include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; @@ -40,14 +41,14 @@ int checkboard(void) phys_size_t initdram(int board_type) { - volatile siu_t *siu = (siu_t *) (MMAP_SIU); - volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); + siu_t *siu = (siu_t *) (MMAP_SIU); + sdram_t *sdram = (sdram_t *)(MMAP_SDRAM); u32 dramsize, i; #ifdef CONFIG_SYS_DRAMSZ1 u32 temp; #endif - siu->drv = CONFIG_SYS_SDRAM_DRVSTRENGTH; + out_be32(&siu->drv, CONFIG_SYS_SDRAM_DRVSTRENGTH); dramsize = CONFIG_SYS_DRAMSZ * 0x100000; for (i = 0x13; i < 0x20; i++) { @@ -55,7 +56,7 @@ phys_size_t initdram(int board_type) break; } i--; - siu->cs0cfg = (CONFIG_SYS_SDRAM_BASE | i); + out_be32(&siu->cs0cfg, CONFIG_SYS_SDRAM_BASE | i); #ifdef CONFIG_SYS_DRAMSZ1 temp = CONFIG_SYS_DRAMSZ1 * 0x100000; @@ -65,31 +66,32 @@ phys_size_t initdram(int board_type) } i--; dramsize += temp; - siu->cs1cfg = ((CONFIG_SYS_SDRAM_BASE + temp) | i); + out_be32(&siu->cs1cfg, (CONFIG_SYS_SDRAM_BASE + temp) | i); #endif - sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1; - sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2; + out_be32(&sdram->cfg1, CONFIG_SYS_SDRAM_CFG1); + out_be32(&sdram->cfg2, CONFIG_SYS_SDRAM_CFG2); /* Issue PALL */ - sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 2; + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2); /* Issue LEMR */ - sdram->mode = CONFIG_SYS_SDRAM_EMOD; - sdram->mode = (CONFIG_SYS_SDRAM_MODE | 0x04000000); + out_be32(&sdram->mode, CONFIG_SYS_SDRAM_EMOD); + out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE | 0x04000000); udelay(500); /* Issue PALL */ - sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2); + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2); /* Perform two refresh cycles */ - sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; - sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4); + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4); - sdram->mode = CONFIG_SYS_SDRAM_MODE; + out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE); - sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00; + out_be32(&sdram->ctrl, + (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00); udelay(100); diff --git a/board/freescale/m548xevb/m548xevb.c b/board/freescale/m548xevb/m548xevb.c index fbc0888..fb216d8 100644 --- a/board/freescale/m548xevb/m548xevb.c +++ b/board/freescale/m548xevb/m548xevb.c @@ -2,7 +2,7 @@ * (C) Copyright 2000-2003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2007, 2012 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this @@ -28,6 +28,7 @@ #include <common.h> #include <pci.h> #include <asm/immap.h> +#include <asm/io.h> DECLARE_GLOBAL_DATA_PTR; @@ -40,14 +41,14 @@ int checkboard(void) phys_size_t initdram(int board_type) { - volatile siu_t *siu = (siu_t *) (MMAP_SIU); - volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM); + siu_t *siu = (siu_t *) (MMAP_SIU); + sdram_t *sdram = (sdram_t *)(MMAP_SDRAM); u32 dramsize, i; #ifdef CONFIG_SYS_DRAMSZ1 u32 temp; #endif - siu->drv = CONFIG_SYS_SDRAM_DRVSTRENGTH; + out_be32(&siu->drv, CONFIG_SYS_SDRAM_DRVSTRENGTH); dramsize = CONFIG_SYS_DRAMSZ * 0x100000; for (i = 0x13; i < 0x20; i++) { @@ -55,7 +56,7 @@ phys_size_t initdram(int board_type) break; } i--; - siu->cs0cfg = (CONFIG_SYS_SDRAM_BASE | i); + out_be32(&siu->cs0cfg, CONFIG_SYS_SDRAM_BASE | i); #ifdef CONFIG_SYS_DRAMSZ1 temp = CONFIG_SYS_DRAMSZ1 * 0x100000; @@ -65,31 +66,32 @@ phys_size_t initdram(int board_type) } i--; dramsize += temp; - siu->cs1cfg = ((CONFIG_SYS_SDRAM_BASE + temp) | i); + out_be32(&siu->cs1cfg, (CONFIG_SYS_SDRAM_BASE + temp) | i); #endif - sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1; - sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2; + out_be32(&sdram->cfg1, CONFIG_SYS_SDRAM_CFG1); + out_be32(&sdram->cfg2, CONFIG_SYS_SDRAM_CFG2); /* Issue PALL */ - sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 2; + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2); /* Issue LEMR */ - sdram->mode = CONFIG_SYS_SDRAM_EMOD; - sdram->mode = (CONFIG_SYS_SDRAM_MODE | 0x04000000); + out_be32(&sdram->mode, CONFIG_SYS_SDRAM_EMOD); + out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE | 0x04000000); udelay(500); /* Issue PALL */ - sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2); + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 2); /* Perform two refresh cycles */ - sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; - sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4; + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4); + out_be32(&sdram->ctrl, CONFIG_SYS_SDRAM_CTRL | 4); - sdram->mode = CONFIG_SYS_SDRAM_MODE; + out_be32(&sdram->mode, CONFIG_SYS_SDRAM_MODE); - sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00; + out_be32(&sdram->ctrl, + (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00); udelay(100); diff --git a/board/freescale/mpc8308rdb/mpc8308rdb.c b/board/freescale/mpc8308rdb/mpc8308rdb.c index 5c54357..7e3fa1a 100644 --- a/board/freescale/mpc8308rdb/mpc8308rdb.c +++ b/board/freescale/mpc8308rdb/mpc8308rdb.c @@ -24,18 +24,56 @@ #include <common.h> #include <hwconfig.h> #include <i2c.h> +#include <spi.h> #include <libfdt.h> #include <fdt_support.h> #include <pci.h> #include <mpc83xx.h> #include <vsc7385.h> #include <netdev.h> +#include <fsl_esdhc.h> #include <asm/io.h> #include <asm/fsl_serdes.h> #include <asm/fsl_mpc83xx_serdes.h> DECLARE_GLOBAL_DATA_PTR; +/* + * The following are used to control the SPI chip selects for the SPI command. + */ +#ifdef CONFIG_MPC8XXX_SPI + +#define SPI_CS_MASK 0x00400000 + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs == 0; +} + +void spi_cs_activate(struct spi_slave *slave) +{ + immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; + + /* active low */ + clrbits_be32(&immr->gpio[0].dat, SPI_CS_MASK); +} + +void spi_cs_deactivate(struct spi_slave *slave) +{ + immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; + + /* inactive high */ + setbits_be32(&immr->gpio[0].dat, SPI_CS_MASK); +} +#endif /* CONFIG_MPC8XXX_SPI */ + +#ifdef CONFIG_FSL_ESDHC +int board_mmc_init(bd_t *bd) +{ + return fsl_esdhc_mmc_init(bd); +} +#endif + static u8 read_board_info(void) { u8 val8; @@ -109,6 +147,25 @@ void pci_init_board(void) */ int misc_init_r(void) { +#ifdef CONFIG_MPC8XXX_SPI + immap_t *immr = (immap_t *)CONFIG_SYS_IMMR; + sysconf83xx_t *sysconf = &immr->sysconf; + + /* + * Set proper bits in SICRH to allow SPI on header J8 + * + * NOTE: this breaks the TSEC2 interface, attached to the Vitesse + * switch. The pinmux configuration does not have a fine enough + * granularity to support both simultaneously. + */ + clrsetbits_be32(&sysconf->sicrh, SICRH_GPIO_A_TSEC2, SICRH_GPIO_A_GPIO); + puts("WARNING: SPI enabled, TSEC2 support is broken\n"); + + /* Set header J8 SPI chip select output, disabled */ + setbits_be32(&immr->gpio[0].dir, SPI_CS_MASK); + setbits_be32(&immr->gpio[0].dat, SPI_CS_MASK); +#endif + #ifdef CONFIG_VSC7385_IMAGE if (vsc7385_upload_firmware((void *) CONFIG_VSC7385_IMAGE, CONFIG_VSC7385_IMAGE_SIZE)) { @@ -124,6 +181,7 @@ void ft_board_setup(void *blob, bd_t *bd) { ft_cpu_setup(blob, bd); fdt_fixup_dr_usb(blob, bd); + fdt_fixup_esdhc(blob, bd); } #endif diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c index c75585e..a275d3a 100644 --- a/board/freescale/mpc8540ads/mpc8540ads.c +++ b/board/freescale/mpc8540ads/mpc8540ads.c @@ -87,10 +87,10 @@ local_bus_init(void) lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; if (lbc_hz < 66) { - lbc->lcrr = CONFIG_SYS_LBC_LCRR | 0x80000000; /* DLL Bypass */ + lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP; /* DLL Bypass */ } else if (lbc_hz >= 133) { - lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */ + lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */ } else { /* @@ -105,7 +105,7 @@ local_bus_init(void) lbc->lcrr = 0x10000004; } - lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */ + lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */ udelay(200); /* diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c index 532d32a..13ca84b 100644 --- a/board/freescale/mpc8541cds/mpc8541cds.c +++ b/board/freescale/mpc8541cds/mpc8541cds.c @@ -269,13 +269,13 @@ local_bus_init(void) lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; if (lbc_hz < 66) { - lbc->lcrr |= 0x80000000; /* DLL Bypass */ + lbc->lcrr |= LCRR_DBYP; /* DLL Bypass */ } else if (lbc_hz >= 133) { - lbc->lcrr &= (~0x80000000); /* DLL Enabled */ + lbc->lcrr &= (~LCRR_DBYP); /* DLL Enabled */ } else { - lbc->lcrr &= (~0x80000000); /* DLL Enabled */ + lbc->lcrr &= (~LCRR_DBYP); /* DLL Enabled */ udelay(200); /* diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c index 3361614..4cfd61c 100644 --- a/board/freescale/mpc8555cds/mpc8555cds.c +++ b/board/freescale/mpc8555cds/mpc8555cds.c @@ -267,13 +267,13 @@ local_bus_init(void) lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; if (lbc_hz < 66) { - lbc->lcrr |= 0x80000000; /* DLL Bypass */ + lbc->lcrr |= LCRR_DBYP; /* DLL Bypass */ } else if (lbc_hz >= 133) { - lbc->lcrr &= (~0x80000000); /* DLL Enabled */ + lbc->lcrr &= (~LCRR_DBYP); /* DLL Enabled */ } else { - lbc->lcrr &= (~0x80000000); /* DLL Enabled */ + lbc->lcrr &= (~LCRR_DBYP); /* DLL Enabled */ udelay(200); /* diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c index 1a165bf..285edbc 100644 --- a/board/freescale/mpc8560ads/mpc8560ads.c +++ b/board/freescale/mpc8560ads/mpc8560ads.c @@ -292,10 +292,10 @@ local_bus_init(void) lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; if (lbc_hz < 66) { - lbc->lcrr = CONFIG_SYS_LBC_LCRR | 0x80000000; /* DLL Bypass */ + lbc->lcrr = CONFIG_SYS_LBC_LCRR | LCRR_DBYP; /* DLL Bypass */ } else if (lbc_hz >= 133) { - lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000); /* DLL Enabled */ + lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP); /* DLL Enabled */ } else { /* @@ -310,7 +310,7 @@ local_bus_init(void) lbc->lcrr = 0x10000004; } - lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~0x80000000);/* DLL Enabled */ + lbc->lcrr = CONFIG_SYS_LBC_LCRR & (~LCRR_DBYP);/* DLL Enabled */ udelay(200); /* diff --git a/board/freescale/mx28evk/iomux.c b/board/freescale/mx28evk/iomux.c index 16a6d8a..ae6eda3 100644 --- a/board/freescale/mx28evk/iomux.c +++ b/board/freescale/mx28evk/iomux.c @@ -173,7 +173,7 @@ const iomux_cfg_t iomux_setup[] = { #define HW_DRAM_CTL29_CONFIG (CS_MAP << 24 | COLUMN_SIZE << 16 | \ ADDR_PINS << 8 | APREBIT) -void mx28_adjust_memory_params(uint32_t *dram_vals) +void mxs_adjust_memory_params(uint32_t *dram_vals) { dram_vals[HW_DRAM_CTL29] = HW_DRAM_CTL29_CONFIG; } diff --git a/board/freescale/mx28evk/mx28evk.c b/board/freescale/mx28evk/mx28evk.c index 867d3c8..d782aea 100644 --- a/board/freescale/mx28evk/mx28evk.c +++ b/board/freescale/mx28evk/mx28evk.c @@ -49,8 +49,8 @@ int board_early_init_f(void) /* SSP0 clock at 96MHz */ mx28_set_sspclk(MXC_SSPCLK0, 96000, 0); - /* SSP2 clock at 96MHz */ - mx28_set_sspclk(MXC_SSPCLK2, 96000, 0); + /* SSP2 clock at 160MHz */ + mx28_set_sspclk(MXC_SSPCLK2, 160000, 0); #ifdef CONFIG_CMD_USB mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT); diff --git a/board/freescale/mx35pdk/README b/board/freescale/mx35pdk/README index 3d69ed5..7232b53 100644 --- a/board/freescale/mx35pdk/README +++ b/board/freescale/mx35pdk/README @@ -71,91 +71,17 @@ exec -c "noinitrd console=ttymxc0,115200 root=/dev/nfsroot rootfstype=nfsroot nf Flashing U-Boot -------------------------------- -There are two options: the original bootloader in NAND can be replaced with -u-boot, or u-boot can be stored on the NOR flash without erasing -the delivered bootloader. +U-boot should be stored on the NOR flash. + The boot storage can be select using the switches on the personality board (SW1-SW2) and on the DEBUG board (SW4-SW10). -The second option is to be preferred if you have not a JTAG debugger. If something goes wrong flashing the bootloader, it is always possible to recover the board booting from the other device. -Replacing the bootloader on the NAND --------------------------------------- -To replace RedBoot with U-Boot, the easy way is to do this in linux. -Start the kernel with the suggested options. Make sure to have set the -mtdparts exactly as described, because this matches the layout on the -mx35pdk. - -You should see in your boot log the following entries for the NAND -flash: - -5 cmdlinepart partitions found on MTD device mxc_nand -Creating 5 MTD partitions on "mxc_nand": -0x000000000000-0x000000100000 : "boot" -0x000000100000-0x000000600000 : "linux" -0x000000600000-0x000006600000 : "root" -0x000006600000-0x000006e00000 : "cfg" -0x000006e00000-0x000080000000 : "user" - -You can use the utilities flash_eraseall and nandwrite to put -u-boot on the NAND. The bootloader is marked as "boot", and 1MB is -reserved. If everything is correct, this partition is accessed as -/dev/mtd4. However, check if it is correct with "cat /proc/mtd" and -get the device node from the partition name: - -$ cat /proc/mtd | grep boot - -I suggest you try the utilities on a different partition to be sure -if everything works correctly. If not, and you remove RedBoot, you have to -reinstall it using the ATK tool as suggested by Freescale, or using a -JTAG debugger. - -I report the versions of the utilities I used (they are provided with ELDK): - --bash-3.2# nandwrite --version -nandwrite $Revision: 1.32 $ - -flash_eraseall --version -flash_eraseall $Revision: 1.22 $ - -nandwrite reports a warning if the file to be saved is not sector aligned. -This should have no consequences, but I preferred to pad u-boot.bin -to get no problem at all. -$ dd if=/dev/zero of=zeros bs=1 count=74800 -$ cat u-boot.bin zeros > u-boot-padded.bin - -To erase the partition: -$ flash_eraseall /dev/mtd4 - -Writing u-boot: - -$ nandwrite /dev/mtd4 u-boot-padded.bin - -Now U-Boot is stored on the booting partition. - -To boot from NAND, you have to select the switches as follows: - -Personality board - SW2 1, 4, 5 on - 2, 3, 6, 7, 8 off - SW1 all off - -Debug Board: - SW5 0 - SW6 0 - SW7 0 - SW8 1 - SW9 1 - SW10 0 - - Saving U-Boot in the NOR flash --------------------------------- -The procedure to save in the NOR flash is quite the same as to write into the NAND. - Check the partition for boot in the NOR flash. Setting the mtdparts as reported, the boot partition should be /dev/mtd0. diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c index 787c923..7cb6b30 100644 --- a/board/freescale/mx35pdk/mx35pdk.c +++ b/board/freescale/mx35pdk/mx35pdk.c @@ -32,6 +32,8 @@ #include <i2c.h> #include <pmic.h> #include <fsl_pmic.h> +#include <mmc.h> +#include <fsl_esdhc.h> #include <mc9sdz60.h> #include <mc13892.h> #include <linux/types.h> @@ -275,3 +277,26 @@ int board_eth_init(bd_t *bis) return rc; } + +#if defined(CONFIG_FSL_ESDHC) + +struct fsl_esdhc_cfg esdhc_cfg = {MMC_SDHC1_BASE_ADDR}; + +int board_mmc_init(bd_t *bis) +{ + /* configure pins for SDHC1 only */ + mxc_request_iomux(MX35_PIN_SD1_CMD, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_SD1_CLK, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_SD1_DATA0, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_SD1_DATA1, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_SD1_DATA2, MUX_CONFIG_FUNC); + mxc_request_iomux(MX35_PIN_SD1_DATA3, MUX_CONFIG_FUNC); + + return fsl_esdhc_initialize(bis, &esdhc_cfg); +} + +int board_mmc_getcd(struct mmc *mmc) +{ + return !(mc9sdz60_reg_read(MC9SDZ60_REG_DES_FLAG) & 0x4); +} +#endif diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index 909ccca..4b4e89b 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -197,18 +197,18 @@ static iomux_v3_cfg_t button_pads[] = { static void setup_iomux_enet(void) { - gpio_direction_output(87, 0); /* GPIO 3-23 */ - gpio_direction_output(190, 1); /* GPIO 6-30 */ - gpio_direction_output(185, 1); /* GPIO 6-25 */ - gpio_direction_output(187, 1); /* GPIO 6-27 */ - gpio_direction_output(188, 1); /* GPIO 6-28*/ - gpio_direction_output(189, 1); /* GPIO 6-29 */ + gpio_direction_output(IMX_GPIO_NR(3, 23), 0); + gpio_direction_output(IMX_GPIO_NR(6, 30), 1); + gpio_direction_output(IMX_GPIO_NR(6, 25), 1); + gpio_direction_output(IMX_GPIO_NR(6, 27), 1); + gpio_direction_output(IMX_GPIO_NR(6, 28), 1); + gpio_direction_output(IMX_GPIO_NR(6, 29), 1); imx_iomux_v3_setup_multiple_pads(enet_pads1, ARRAY_SIZE(enet_pads1)); - gpio_direction_output(184, 1); /* GPIO 6-24 */ + gpio_direction_output(IMX_GPIO_NR(6, 24), 1); /* Need delay 10ms according to KSZ9021 spec */ udelay(1000 * 10); - gpio_set_value(87, 1); /* GPIO 3-23 */ + gpio_set_value(IMX_GPIO_NR(3, 23), 1); imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2)); } @@ -249,11 +249,11 @@ int board_mmc_getcd(struct mmc *mmc) int ret; if (cfg->esdhc_base == USDHC3_BASE_ADDR) { - gpio_direction_input(192); /*GPIO7_0*/ - ret = !gpio_get_value(192); + gpio_direction_input(IMX_GPIO_NR(7, 0)); + ret = !gpio_get_value(IMX_GPIO_NR(7, 0)); } else { - gpio_direction_input(38); /*GPIO2_6*/ - ret = !gpio_get_value(38); + gpio_direction_input(IMX_GPIO_NR(2, 6)); + ret = !gpio_get_value(IMX_GPIO_NR(2, 6)); } return ret; diff --git a/board/freescale/p1010rdb/ddr.c b/board/freescale/p1010rdb/ddr.c index 10c5a42..6d00caf 100644 --- a/board/freescale/p1010rdb/ddr.c +++ b/board/freescale/p1010rdb/ddr.c @@ -147,10 +147,11 @@ phys_size_t fixed_sdram(void) cpu = gd->cpu; /* P1014 and it's derivatives support max 16bit DDR width */ if (cpu->soc_ver == SVR_P1014) { + ddr_cfg_regs.ddr_sdram_cfg &= ~SDRAM_CFG_DBW_MASK; ddr_cfg_regs.ddr_sdram_cfg |= SDRAM_CFG_16_BE; - ddr_cfg_regs.cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS >> 1; - ddr_cfg_regs.ddr_sdram_cfg &= ~0x00180000; - ddr_cfg_regs.ddr_sdram_cfg |= 0x001080000; + /* divide SA and EA by two and then mask the rest so we don't + * write to reserved fields */ + ddr_cfg_regs.cs[0].bnds = (CONFIG_SYS_DDR_CS0_BNDS >> 1) & 0x0fff0fff; } ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; diff --git a/board/freescale/p1_p2_rdb_pc/law.c b/board/freescale/p1_p2_rdb_pc/law.c index 7968919..0da8300 100644 --- a/board/freescale/p1_p2_rdb_pc/law.c +++ b/board/freescale/p1_p2_rdb_pc/law.c @@ -25,13 +25,11 @@ #include <asm/mmu.h> struct law_entry law_table[] = { -#ifndef CONFIG_NAND_SPL SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_PMC_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_LBC), #ifdef CONFIG_VSC7385_ENET SET_LAW(CONFIG_SYS_VSC7385_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), #endif -#endif SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_LBC), #ifdef CONFIG_SYS_NAND_BASE_PHYS SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), diff --git a/board/freescale/p3060qds/README b/board/freescale/p3060qds/README deleted file mode 100644 index ec62798..0000000 --- a/board/freescale/p3060qds/README +++ /dev/null @@ -1,110 +0,0 @@ -Overview -========= -The P3060QDS is a Freescale reference board that hosts the six-core P3060 SOC. - -The P3060 Processor combines six e500mc Power Architecture processor -cores(1.2GHz) with high-performance datapath acceleration -architecture(DPAA), CoreNet fabric infrastructure, as well as network -and peripheral bus interfaces required for networking, telecom/datacom, -wireless infrastructure, and military/aerospace applications. - - -P3060QDS Board Specifications: -============================== -Memory subsystem: - * 2G Bytes UDIMM DDR3(64bit bus) with ECC on - * 128M Bytes NOR flash single-chip memory - * 16M Bytes SPI flash - * 8K Bytes AT24C64 I2C EEPROM for RCW - -Ethernet(Default SERDES 0x19): - * FM1-dTSEC1: connected to RGMII PHY1 (Vitesse VSC8641 on board,Bottom of dual RJ45) - * FM1-dTSEC2: connected to RGMII PHY2 (Vitesse VSC8641 on board,Top of dual RJ45) - * FM1-dTSEC3: connected to SGMII PHY (Vitesse VSC8234 port1 in slot1) - * FM1-dTSEC4: connected to SGMII PHY (Vitesse VSC8234 port3 in slot1) - * FM2-dTSEC1: connected to SGMII PHY (Vitesse VSC8234 port0 in slot2) - * FM2-dTSEC2: connected to SGMII PHY (Vitesse VSC8234 port2 in slot2) - * FM2-dTSEC3: connected to SGMII PHY (Vitesse VSC8234 port0 in slot1) - * FM2-dTSEC4: connected to SGMII PHY (Vitesse VSC8234 port2 in slot1) - -PCIe: - * PCIe1: Lanes A, B, C and D of Bank1 are connected to one x4 PCIe SLOT4 - * PCIe2: Lanes E, F, G and H of Bank1 are connected to one x4 PCIe SLOT3 - -RapidIO: - * sRIO1: Lanes E, F, G and H of Bank1 are connected to sRIO1 (SLOT3) - * sRIO2: Lanes A, B, C and D of Bank1 are connected to sRIO2 (SLOT4) - -USB: - * USB1: connected via an external ULPI PHY SMC3315 to a TYPE-A interface - * USB2: connected via an external ULPI PHY SMC3315 to a TYPE-AB interface - -I2C: - * I2C1_CH0: EEPROM AT24C64(0x50) RCW, AT24C02(0x51) DDR SPD, - AT24C02(0x53) DDR SPD, AT24C02(0x57) SystemID, RTC DS3232(0x68) - * I2C1_CH1: 1588 RiserCard(0x55), HSLB Testport, TempMon - ADT7461(0x4C), SerDesMux DS64MB201(0x51/59/5C/5D) - * I2C1_CH2: VDD/GVDD/GIDD ZL6100 (0x21/0x22/0x23/0x24/0x40) - * I2C1_CH3: OCM CFG AT24C02(0x55), OCM IPL AT24C64(0x56) - * I2C1_CH4: PCIe SLOT1 - * I2C1_CH5: PCIe SLOT2 - * I2C1_CH6: PCIe SLOT3 - * I2C1_CH7: PCIe SLOT4 - * I2C2: NULL - * I2C3: NULL - -UART: - * Supports two UARTs up to 115200 bps for console - - -Boot from NOR flash -=================== -1. Build image - export ARCH=powerpc - export CROSS_COMPILE=/your_path/gcc-4.5.xx-eglibc-2.11.xx/powerpc-linux-gnu/bin/powerpc-linux-gnu- - make P3060QDS_config - make - -2. Program image - => tftp 1000000 u-boot.bin - => protect off all - => erase eff80000 efffffff - => cp.b 1000000 eff80000 80000 - -3. Program RCW - => tftp 1000000 rcw.bin - => protect off all - => erase e8000000 e801ffff - => cp.b 1000000 e8000000 50 - -4. Program FMAN Firmware ucode - => tftp 1000000 ucode.bin - => protect off all - => erase ef000000 ef0fffff - => cp.b 1000000 ef000000 2000 - -5. Change DIP-switch - RCW Location: SW1[1-5] = 01101 (eLBC 16bit NOR flash) - Note: 1 stands for 'on', 0 stands for 'off' - - -Using the Device Tree Source File -================================= -To create the DTB (Device Tree Binary) image file, use a command -similar to this: - dtc -O dtb -b 0 -p 1024 p3060qds.dts > p3060qds.dtb - -Or use the following command: - {linux-2.6}/make p3060qds.dtb ARCH=powerpc - -then the dtb file will be generated under the following directory: - {linux-2.6}/arch/powerpc/boot/p3060qds.dtb - - -Booting Linux -============= -Place a linux uImage in the TFTP disk area. - tftp 1000000 uImage - tftp 2000000 rootfs.ext2.gz.uboot - tftp 3000000 p3060rdb.dtb - bootm 1000000 2000000 3000000 diff --git a/board/freescale/p3060qds/ddr.c b/board/freescale/p3060qds/ddr.c deleted file mode 100644 index 9affbf0..0000000 --- a/board/freescale/p3060qds/ddr.c +++ /dev/null @@ -1,248 +0,0 @@ -/* - * Copyright 2009-2011 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * Version 2 as published by the Free Software Foundation. - */ - -#include <common.h> -#include <i2c.h> -#include <hwconfig.h> -#include <asm/mmu.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_ddr_dimm_params.h> -#include <asm/fsl_law.h> - -#include "p3060qds.h" - -/* - * Fixed sdram init -- doesn't use serial presence detect. - */ - -phys_size_t fixed_sdram(void) -{ - int i; - char buf[32]; - fsl_ddr_cfg_regs_t ddr_cfg_regs; - phys_size_t ddr_size; - unsigned int lawbar1_target_id; - ulong ddr_freq, ddr_freq_mhz; - - ddr_freq = get_ddr_freq(0); - ddr_freq_mhz = ddr_freq / 1000000; - - printf("Configuring DDR for %s MT/s data rate\n", - strmhz(buf, ddr_freq)); - - for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) { - if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) && - (ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) { - memcpy(&ddr_cfg_regs, - fixed_ddr_parm_0[i].ddr_settings, - sizeof(ddr_cfg_regs)); - break; - } - } - - if (fixed_ddr_parm_0[i].max_freq == 0) - panic("Unsupported DDR data rate %s MT/s data rate\n", - strmhz(buf, ddr_freq)); - - ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; - ddr_cfg_regs.ddr_cdr1 = DDR_CDR1_DHC_EN; - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0); - - /* - * setup laws for DDR. If not interleaving, presuming half memory on - * DDR1 and the other half on DDR2 - */ - if (fixed_ddr_parm_0[i].ddr_settings->cs[0].config & 0x20000000) { - if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, - ddr_size, - LAW_TRGT_IF_DDR_INTRLV) < 0) { - printf("ERROR setting Local Access Windows for DDR\n"); - return 0; - } - } else { - lawbar1_target_id = LAW_TRGT_IF_DDR_1; - if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, - ddr_size, - lawbar1_target_id) < 0) { - printf("ERROR setting Local Access Windows for DDR\n"); - return 0; - } - } - return ddr_size; -} - -struct board_specific_params { - u32 n_ranks; - u32 datarate_mhz_high; - u32 clk_adjust; - u32 wrlvl_start; - u32 cpo; - u32 write_data_delay; - u32 force_2T; -}; - -/* - * This table contains all valid speeds we want to override with board - * specific parameters. datarate_mhz_high values need to be in ascending order - * for each n_ranks group. - */ -static const struct board_specific_params udimm[] = { - /* - * memory controller 0 - * num| hi| clk| wrlvl | cpo |wrdata|2T - * ranks| mhz|adjst| start | |delay | - */ - {4, 850, 4, 6, 0xff, 2, 0}, - {4, 950, 5, 7, 0xff, 2, 0}, - {4, 1050, 5, 8, 0xff, 2, 0}, - {4, 1250, 5, 10, 0xff, 2, 0}, - {4, 1350, 5, 11, 0xff, 2, 0}, - {4, 1666, 5, 12, 0xff, 2, 0}, - {2, 850, 5, 6, 0xff, 2, 0}, - {2, 950, 5, 7, 0xff, 2, 0}, - {2, 1250, 4, 6, 0xff, 2, 0}, - {2, 1350, 5, 7, 0xff, 2, 0}, - {2, 1666, 5, 8, 0xff, 2, 0}, - {1, 850, 4, 5, 0xff, 2, 0}, - {1, 950, 4, 7, 0xff, 2, 0}, - {1, 1666, 4, 8, 0xff, 2, 0}, - {} -}; - -static const struct board_specific_params rdimm[] = { - /* - * memory controller 0 - * num| hi| clk| wrlvl | cpo |wrdata|2T - * ranks| mhz|adjst| start | |delay | - */ - {4, 850, 4, 6, 0xff, 2, 0}, - {4, 950, 5, 7, 0xff, 2, 0}, - {4, 1050, 5, 8, 0xff, 2, 0}, - {4, 1250, 5, 10, 0xff, 2, 0}, - {4, 1350, 5, 11, 0xff, 2, 0}, - {4, 1666, 5, 12, 0xff, 2, 0}, - {2, 850, 4, 6, 0xff, 2, 0}, - {2, 1050, 4, 7, 0xff, 2, 0}, - {2, 1666, 4, 8, 0xff, 2, 0}, - {1, 850, 4, 5, 0xff, 2, 0}, - {1, 950, 4, 7, 0xff, 2, 0}, - {1, 1666, 4, 8, 0xff, 2, 0}, - {} -}; - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - const struct board_specific_params *pbsp, *pbsp_highest = NULL; - ulong ddr_freq; - - if (ctrl_num) { - printf("Wrong parameter for controller number %d", ctrl_num); - return; - } - if (!pdimm->n_ranks) - return; - - if (popts->registered_dimm_en) - pbsp = rdimm; - else - pbsp = udimm; - - /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr - * freqency and n_banks specified in board_specific_parameters table. - */ - ddr_freq = get_ddr_freq(0) / 1000000; - while (pbsp->datarate_mhz_high) { - if (pbsp->n_ranks == pdimm->n_ranks) { - if (ddr_freq <= pbsp->datarate_mhz_high) { - popts->cpo_override = pbsp->cpo; - popts->write_data_delay = - pbsp->write_data_delay; - popts->clk_adjust = pbsp->clk_adjust; - popts->wrlvl_start = pbsp->wrlvl_start; - popts->twoT_en = pbsp->force_2T; - goto found; - } - pbsp_highest = pbsp; - } - pbsp++; - } - - if (pbsp_highest) { - printf("Error: board specific timing not found " - "for data rate %lu MT/s!\n" - "Trying to use the highest speed (%u) parameters\n", - ddr_freq, pbsp_highest->datarate_mhz_high); - popts->cpo_override = pbsp_highest->cpo; - popts->write_data_delay = pbsp_highest->write_data_delay; - popts->clk_adjust = pbsp_highest->clk_adjust; - popts->wrlvl_start = pbsp_highest->wrlvl_start; - popts->twoT_en = pbsp_highest->force_2T; - } else { - panic("DIMM is not supported by this board"); - } - - -found: - - /* - * The datasheet of HMT125U7BFR8C-H9 blocks CL=7 as reservered. - * However SPD still claims CL=7 is supported. Extensive tests - * confirmed this board cannot work stably with CL=7 with this - * particular DIMM. - */ - if (ddr_freq >= 800 && ddr_freq < 1066 && \ - !strncmp(pdimm[0].mpart, "HMT125U7BFR8C-H9", 16)) { - popts->cas_latency_override = 1; - popts->cas_latency_override_value = 8; - debug("Override CL to 8\n"); - } - /* - * Factors to consider for half-strength driver enable: - * - number of DIMMs installed - */ - popts->half_strength_driver_enable = 0; - /* - * Write leveling override - */ - popts->wrlvl_override = 1; - popts->wrlvl_sample = 0xf; - - /* - * Rtt and Rtt_WR override - */ - popts->rtt_override = 0; - - /* Enable ZQ calibration */ - popts->zq_en = 1; - - /* DHC_EN =1, ODT = 60 Ohm */ - popts->ddr_cdr1 = DDR_CDR1_DHC_EN; -} - -phys_size_t initdram(int board_type) -{ - phys_size_t dram_size; - - puts("Initializing...."); - - if (fsl_use_spd()) { - puts("using SPD\n"); - dram_size = fsl_ddr_sdram(); - } else { - puts("using fixed parameters\n"); - dram_size = fixed_sdram(); - } - - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - - debug(" DDR: "); - return dram_size; -} diff --git a/board/freescale/p3060qds/eth.c b/board/freescale/p3060qds/eth.c deleted file mode 100644 index 3f812db..0000000 --- a/board/freescale/p3060qds/eth.c +++ /dev/null @@ -1,482 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <command.h> -#include <netdev.h> -#include <asm/mmu.h> -#include <asm/processor.h> -#include <asm/cache.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_law.h> -#include <asm/fsl_ddr_sdram.h> -#include <asm/fsl_serdes.h> -#include <asm/fsl_portals.h> -#include <asm/fsl_liodn.h> -#include <malloc.h> -#include <fm_eth.h> -#include <fsl_mdio.h> -#include <miiphy.h> -#include <phy.h> -#include <asm/fsl_dtsec.h> - -#include "../common/qixis.h" -#include "../common/fman.h" - -#include "p3060qds_qixis.h" - -#define EMI_NONE 0xffffffff -#define EMI1_RGMII1 0 -#define EMI1_SLOT1 1 -#define EMI1_SLOT2 2 -#define EMI1_SLOT3 3 -#define EMI1_RGMII2 4 - -static int mdio_mux[NUM_FM_PORTS]; - -static char *mdio_names[5] = { - "P3060QDS_MDIO0", - "P3060QDS_MDIO1", - "P3060QDS_MDIO2", - "P3060QDS_MDIO3", - "P3060QDS_MDIO4", -}; - -/* - * Mapping of all 18 SERDES lanes to board slots. - * A value of '0' here means that the mapping must be determined - * dynamically, Lane 8/9/16/17 map to Slot1 or Aurora debug - */ -static u8 lane_to_slot[] = { - 4, 4, 4, 4, 3, 3, 3, 3, 0, 0, 2, 2, 2, 2, 1, 1, 0, 0 -}; - -static char *p3060qds_mdio_name_for_muxval(u32 muxval) -{ - return mdio_names[muxval]; -} - -struct mii_dev *mii_dev_for_muxval(u32 muxval) -{ - struct mii_dev *bus; - char *name = p3060qds_mdio_name_for_muxval(muxval); - - if (!name) { - printf("No bus for muxval %x\n", muxval); - return NULL; - } - - bus = miiphy_get_dev_by_name(name); - - if (!bus) { - printf("No bus by name %s\n", name); - return NULL; - } - - return bus; -} - -struct p3060qds_mdio { - u32 muxval; - struct mii_dev *realbus; -}; - -static void p3060qds_mux_mdio(u32 muxval) -{ - u8 brdcfg4; - - brdcfg4 = QIXIS_READ(brdcfg[4]); - brdcfg4 &= ~BRDCFG4_EMISEL_MASK; - brdcfg4 |= (muxval << 4); - QIXIS_WRITE(brdcfg[4], brdcfg4); -} - -static int p3060qds_mdio_read(struct mii_dev *bus, int addr, int devad, - int regnum) -{ - struct p3060qds_mdio *priv = bus->priv; - - p3060qds_mux_mdio(priv->muxval); - - return priv->realbus->read(priv->realbus, addr, devad, regnum); -} - -static int p3060qds_mdio_write(struct mii_dev *bus, int addr, int devad, - int regnum, u16 value) -{ - struct p3060qds_mdio *priv = bus->priv; - - p3060qds_mux_mdio(priv->muxval); - - return priv->realbus->write(priv->realbus, addr, devad, regnum, value); -} - -static int p3060qds_mdio_reset(struct mii_dev *bus) -{ - struct p3060qds_mdio *priv = bus->priv; - - return priv->realbus->reset(priv->realbus); -} - -static int p3060qds_mdio_init(char *realbusname, u32 muxval) -{ - struct p3060qds_mdio *pmdio; - struct mii_dev *bus = mdio_alloc(); - - if (!bus) { - printf("Failed to allocate P3060QDS MDIO bus\n"); - return -1; - } - - pmdio = malloc(sizeof(*pmdio)); - if (!pmdio) { - printf("Failed to allocate P3060QDS private data\n"); - free(bus); - return -1; - } - - bus->read = p3060qds_mdio_read; - bus->write = p3060qds_mdio_write; - bus->reset = p3060qds_mdio_reset; - sprintf(bus->name, p3060qds_mdio_name_for_muxval(muxval)); - - pmdio->realbus = miiphy_get_dev_by_name(realbusname); - - if (!pmdio->realbus) { - printf("No bus with name %s\n", realbusname); - free(bus); - free(pmdio); - return -1; - } - - pmdio->muxval = muxval; - bus->priv = pmdio; - - return mdio_register(bus); -} - -void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa, - enum fm_port port, int offset) -{ - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - int srds_prtcl = (in_be32(&gur->rcwsr[4]) & - FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26; - - if (mdio_mux[port] == EMI1_RGMII1) - fdt_set_phy_handle(blob, prop, pa, "phy_rgmii1"); - - if (mdio_mux[port] == EMI1_RGMII2) - fdt_set_phy_handle(blob, prop, pa, "phy_rgmii2"); - - if ((mdio_mux[port] == EMI1_SLOT1) && ((srds_prtcl == 0x3) - || (srds_prtcl == 0x6))) { - switch (port) { - case FM2_DTSEC4: - fdt_set_phy_handle(blob, prop, pa, "phy2_slot1"); - break; - case FM1_DTSEC4: - fdt_set_phy_handle(blob, prop, pa, "phy3_slot1"); - break; - default: - break; - } - } - - if (mdio_mux[port] == EMI1_SLOT3) { - switch (port) { - case FM2_DTSEC3: - fdt_set_phy_handle(blob, prop, pa, "phy0_slot3"); - break; - case FM1_DTSEC3: - fdt_set_phy_handle(blob, prop, pa, "phy1_slot3"); - break; - default: - break; - } - } -} - -void fdt_fixup_board_enet(void *fdt) -{ - int i, lane, idx; - - for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { - idx = i - FM1_DTSEC1; - switch (fm_info_get_enet_if(i)) { - case PHY_INTERFACE_MODE_SGMII: - lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx); - if (lane < 0) - break; - - switch (mdio_mux[i]) { - case EMI1_SLOT1: - if (lane >= 14) { - fdt_status_okay_by_alias(fdt, - "emi1_slot1"); - fdt_status_disabled_by_alias(fdt, - "emi1_slot1_bk1"); - } else { - fdt_status_disabled_by_alias(fdt, - "emi1_slot1"); - fdt_status_okay_by_alias(fdt, - "emi1_slot1_bk1"); - } - break; - case EMI1_SLOT2: - fdt_status_okay_by_alias(fdt, "emi1_slot2"); - break; - case EMI1_SLOT3: - fdt_status_okay_by_alias(fdt, "emi1_slot3"); - break; - } - break; - case PHY_INTERFACE_MODE_RGMII: - if (i == FM1_DTSEC1) - fdt_status_okay_by_alias(fdt, "emi1_rgmii1"); - - if (i == FM1_DTSEC2) - fdt_status_okay_by_alias(fdt, "emi1_rgmii2"); - break; - default: - break; - } - } -#if (CONFIG_SYS_NUM_FMAN == 2) - for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) { - idx = i - FM2_DTSEC1; - switch (fm_info_get_enet_if(i)) { - case PHY_INTERFACE_MODE_SGMII: - lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx); - if (lane >= 0) { - switch (mdio_mux[i]) { - case EMI1_SLOT1: - if (lane >= 14) - fdt_status_okay_by_alias(fdt, - "emi1_slot1"); - else - fdt_status_okay_by_alias(fdt, - "emi1_slot1_bk1"); - break; - case EMI1_SLOT2: - fdt_status_okay_by_alias(fdt, - "emi1_slot2"); - break; - case EMI1_SLOT3: - fdt_status_okay_by_alias(fdt, - "emi1_slot3"); - break; - } - } - break; - default: - break; - } - } -#endif -} - -static void initialize_lane_to_slot(void) -{ - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - int sdprtl = (in_be32(&gur->rcwsr[4]) & - FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26; - - switch (sdprtl) { - case 0x03: - case 0x06: - lane_to_slot[8] = 1; - lane_to_slot[9] = lane_to_slot[8]; - lane_to_slot[16] = 5; - lane_to_slot[17] = lane_to_slot[16]; - break; - case 0x16: - case 0x19: - case 0x1C: - lane_to_slot[8] = 5; - lane_to_slot[9] = lane_to_slot[8]; - lane_to_slot[16] = 1; - lane_to_slot[17] = lane_to_slot[16]; - break; - default: - puts("Invalid SerDes protocol for P3060QDS\n"); - break; - } -} - -int board_eth_init(bd_t *bis) -{ -#ifdef CONFIG_FMAN_ENET - struct dtsec *tsec = (void *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR; - int i; - struct fsl_pq_mdio_info dtsec_mdio_info; - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - int srds_cfg = (in_be32(&gur->rcwsr[4]) & - FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26; - - initialize_lane_to_slot(); - - /* - * Set TBIPA on FM1@DTSEC1. This is needed for configurations - * where FM1@DTSEC1 isn't used directly, since it provides - * MDIO for other ports. - */ - out_be32(&tsec->tbipa, CONFIG_SYS_TBIPA_VALUE); - - /* Initialize the mdio_mux array so we can recognize empty elements */ - for (i = 0; i < NUM_FM_PORTS; i++) - mdio_mux[i] = EMI_NONE; - - dtsec_mdio_info.regs = - (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR; - dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; - - /* Register the 1G MDIO bus */ - fsl_pq_mdio_init(bis, &dtsec_mdio_info); - - /* Register the 5 muxing front-ends to the MDIO buses */ - if (fm_info_get_enet_if(FM1_DTSEC1) == PHY_INTERFACE_MODE_RGMII) - p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII1); - - if (fm_info_get_enet_if(FM1_DTSEC2) == PHY_INTERFACE_MODE_RGMII) - p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII2); - p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1); - p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2); - p3060qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3); - - if (fm_info_get_enet_if(FM1_DTSEC1) == PHY_INTERFACE_MODE_RGMII) - fm_info_set_phy_address(FM1_DTSEC1, 1); /* RGMII1 */ - else if (fm_info_get_enet_if(FM1_DTSEC1) == PHY_INTERFACE_MODE_SGMII) - fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT2_PHY_ADDR); - - if (fm_info_get_enet_if(FM1_DTSEC2) == PHY_INTERFACE_MODE_RGMII) - fm_info_set_phy_address(FM1_DTSEC2, 2); /* RGMII2 */ - else if (fm_info_get_enet_if(FM1_DTSEC2) == PHY_INTERFACE_MODE_SGMII) - fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT4_PHY_ADDR); - - fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT3_PHY_ADDR); - - switch (srds_cfg) { - case 0x03: - case 0x06: - fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT4_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT1_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC4, SGMII_CARD_PORT2_PHY_ADDR); - break; - case 0x16: - case 0x19: - case 0x1C: - fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT1_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT2_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT3_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR); - break; - default: - puts("Invalid SerDes protocol for P3060QDS\n"); - break; - } - - for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { - int idx = i - FM1_DTSEC1, lane, slot; - switch (fm_info_get_enet_if(i)) { - case PHY_INTERFACE_MODE_SGMII: - lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx); - if (lane < 0) - break; - slot = lane_to_slot[lane]; - if (QIXIS_READ(present) & (1 << (slot - 1))) - fm_disable_port(i); - switch (slot) { - case 1: - mdio_mux[i] = EMI1_SLOT1; - fm_info_set_mdio(i, - mii_dev_for_muxval(mdio_mux[i])); - break; - case 2: - mdio_mux[i] = EMI1_SLOT2; - fm_info_set_mdio(i, - mii_dev_for_muxval(mdio_mux[i])); - break; - case 3: - mdio_mux[i] = EMI1_SLOT3; - fm_info_set_mdio(i, - mii_dev_for_muxval(mdio_mux[i])); - break; - }; - break; - case PHY_INTERFACE_MODE_RGMII: - if (i == FM1_DTSEC1) { - mdio_mux[i] = EMI1_RGMII1; - fm_info_set_mdio(i, - mii_dev_for_muxval(mdio_mux[i])); - } else if (i == FM1_DTSEC2) { - mdio_mux[i] = EMI1_RGMII2; - fm_info_set_mdio(i, - mii_dev_for_muxval(mdio_mux[i])); - } - break; - default: - break; - } - } - -#if (CONFIG_SYS_NUM_FMAN == 2) - for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) { - int idx = i - FM2_DTSEC1, lane, slot; - switch (fm_info_get_enet_if(i)) { - case PHY_INTERFACE_MODE_SGMII: - lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx); - if (lane < 0) - break; - slot = lane_to_slot[lane]; - if (QIXIS_READ(present) & (1 << (slot - 1))) - fm_disable_port(i); - switch (slot) { - case 1: - mdio_mux[i] = EMI1_SLOT1; - fm_info_set_mdio(i, - mii_dev_for_muxval(mdio_mux[i])); - break; - case 2: - mdio_mux[i] = EMI1_SLOT2; - fm_info_set_mdio(i, - mii_dev_for_muxval(mdio_mux[i])); - break; - case 3: - mdio_mux[i] = EMI1_SLOT3; - fm_info_set_mdio(i, - mii_dev_for_muxval(mdio_mux[i])); - break; - }; - break; - default: - break; - } - } -#endif /* CONFIG_SYS_NUM_FMAN */ - - cpu_eth_init(bis); -#endif /* CONFIG_FMAN_ENET */ - - return pci_eth_init(bis); -} diff --git a/board/freescale/p3060qds/fixed_ddr.c b/board/freescale/p3060qds/fixed_ddr.c deleted file mode 100644 index 125988d..0000000 --- a/board/freescale/p3060qds/fixed_ddr.c +++ /dev/null @@ -1,214 +0,0 @@ -/* - * Copyright 2009-2011 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * Version 2 as published by the Free Software Foundation. - */ - -#include <common.h> -#include <asm/fsl_ddr_sdram.h> - -#define CONFIG_SYS_DDR_TIMING_3_1200 0x01030000 -#define CONFIG_SYS_DDR_TIMING_0_1200 0xCC550104 -#define CONFIG_SYS_DDR_TIMING_1_1200 0x868FAA45 -#define CONFIG_SYS_DDR_TIMING_2_1200 0x0FB8A912 -#define CONFIG_SYS_DDR_MODE_1_1200 0x00441A40 -#define CONFIG_SYS_DDR_MODE_2_1200 0x00100000 -#define CONFIG_SYS_DDR_INTERVAL_1200 0x12480100 -#define CONFIG_SYS_DDR_CLK_CTRL_1200 0x02800000 - -#define CONFIG_SYS_DDR_TIMING_3_1000 0x00020000 -#define CONFIG_SYS_DDR_TIMING_0_1000 0xCC440104 -#define CONFIG_SYS_DDR_TIMING_1_1000 0x727DF944 -#define CONFIG_SYS_DDR_TIMING_2_1000 0x0FB088CF -#define CONFIG_SYS_DDR_MODE_1_1000 0x00441830 -#define CONFIG_SYS_DDR_MODE_2_1000 0x00080000 -#define CONFIG_SYS_DDR_INTERVAL_1000 0x0F3C0100 -#define CONFIG_SYS_DDR_CLK_CTRL_1000 0x02800000 - -#define CONFIG_SYS_DDR_TIMING_3_900 0x00020000 -#define CONFIG_SYS_DDR_TIMING_0_900 0xCC440104 -#define CONFIG_SYS_DDR_TIMING_1_900 0x616ba844 -#define CONFIG_SYS_DDR_TIMING_2_900 0x0fb088ce -#define CONFIG_SYS_DDR_MODE_1_900 0x00441620 -#define CONFIG_SYS_DDR_MODE_2_900 0x00080000 -#define CONFIG_SYS_DDR_INTERVAL_900 0x0db60100 -#define CONFIG_SYS_DDR_CLK_CTRL_900 0x02800000 - -#define CONFIG_SYS_DDR_TIMING_3_800 0x00020000 -#define CONFIG_SYS_DDR_TIMING_0_800 0xcc330104 -#define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b4744 -#define CONFIG_SYS_DDR_TIMING_2_800 0x0fa888cc -#define CONFIG_SYS_DDR_MODE_1_800 0x00441420 -#define CONFIG_SYS_DDR_MODE_2_800 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL_800 0x0c300100 -#define CONFIG_SYS_DDR_CLK_CTRL_800 0x02800000 - -#define CONFIG_SYS_DDR_CS0_BNDS 0x000000FF -#define CONFIG_SYS_DDR_CS1_BNDS 0x00000000 -#define CONFIG_SYS_DDR_CS2_BNDS 0x000000FF -#define CONFIG_SYS_DDR_CS3_BNDS 0x000000FF -#define CONFIG_SYS_DDR2_CS0_BNDS 0x000000FF -#define CONFIG_SYS_DDR2_CS1_BNDS 0x00000000 -#define CONFIG_SYS_DDR2_CS2_BNDS 0x000000FF -#define CONFIG_SYS_DDR2_CS3_BNDS 0x000000FF -#define CONFIG_SYS_DDR_CS0_CONFIG 0xA0044202 -#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 -#define CONFIG_SYS_DDR_CS1_CONFIG 0x80004202 -#define CONFIG_SYS_DDR_CS2_CONFIG 0x00000000 -#define CONFIG_SYS_DDR_CS3_CONFIG 0x00000000 -#define CONFIG_SYS_DDR2_CS0_CONFIG 0x80044202 -#define CONFIG_SYS_DDR2_CS1_CONFIG 0x80004202 -#define CONFIG_SYS_DDR2_CS2_CONFIG 0x00000000 -#define CONFIG_SYS_DDR2_CS3_CONFIG 0x00000000 -#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 -#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 -#define CONFIG_SYS_DDR_CS1_CONFIG 0x80004202 -#define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef -#define CONFIG_SYS_DDR_TIMING_4 0x00000001 -#define CONFIG_SYS_DDR_TIMING_5 0x02401400 -#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 -#define CONFIG_SYS_DDR_ZQ_CNTL 0x89080600 -#define CONFIG_SYS_DDR_WRLVL_CNTL 0x8675F607 -#define CONFIG_SYS_DDR_SDRAM_CFG 0xE7044000 -#define CONFIG_SYS_DDR_SDRAM_CFG2 0x24401031 -#define CONFIG_SYS_DDR_RCW_1 0x00000000 -#define CONFIG_SYS_DDR_RCW_2 0x00000000 -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef - -fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = { - .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS, - .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS, - .cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS, - .cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS, - .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG, - .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, - .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG, - .cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG, - .cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG, - .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800, - .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800, - .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800, - .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800, - .ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG, - .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2, - .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800, - .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800, - .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, - .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800, - .ddr_data_init = CONFIG_MEM_INIT_VALUE, - .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800, - .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, - .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, - .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, - .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, - .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL, - .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL, - .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, - .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 -}; - -fsl_ddr_cfg_regs_t ddr_cfg_regs_900 = { - .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS, - .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS, - .cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS, - .cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS, - .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG, - .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, - .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG, - .cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG, - .cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG, - .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_900, - .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_900, - .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_900, - .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_900, - .ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG, - .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2, - .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_900, - .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_900, - .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, - .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_900, - .ddr_data_init = CONFIG_MEM_INIT_VALUE, - .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_900, - .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, - .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, - .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, - .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, - .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL, - .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL, - .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, - .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 -}; - -fsl_ddr_cfg_regs_t ddr_cfg_regs_1000 = { - .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS, - .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS, - .cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS, - .cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS, - .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG, - .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, - .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG, - .cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG, - .cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG, - .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1000, - .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1000, - .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1000, - .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1000, - .ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG, - .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2, - .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1000, - .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1000, - .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, - .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1000, - .ddr_data_init = CONFIG_MEM_INIT_VALUE, - .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1000, - .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, - .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, - .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, - .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, - .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL, - .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL, - .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, - .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 -}; - -fsl_ddr_cfg_regs_t ddr_cfg_regs_1200 = { - .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS, - .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS, - .cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS, - .cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS, - .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG, - .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, - .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG, - .cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG, - .cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG, - .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1200, - .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1200, - .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1200, - .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1200, - .ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG, - .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2, - .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1200, - .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1200, - .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, - .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1200, - .ddr_data_init = CONFIG_MEM_INIT_VALUE, - .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1200, - .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, - .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, - .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, - .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, - .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL, - .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL, - .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, - .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 -}; - -fixed_ddr_parm_t fixed_ddr_parm_0[] = { - {750, 850, &ddr_cfg_regs_800}, - {850, 950, &ddr_cfg_regs_900}, - {950, 1050, &ddr_cfg_regs_1000}, - {1050, 1250, &ddr_cfg_regs_1200}, - {0, 0, NULL} -}; diff --git a/board/freescale/p3060qds/p3060qds.c b/board/freescale/p3060qds/p3060qds.c deleted file mode 100644 index 43e7f28..0000000 --- a/board/freescale/p3060qds/p3060qds.c +++ /dev/null @@ -1,342 +0,0 @@ -/* - * Copyright 2011-2012 Freescale Semiconductor, Inc. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include <common.h> -#include <command.h> -#include <netdev.h> -#include <linux/compiler.h> -#include <asm/mmu.h> -#include <asm/processor.h> -#include <asm/cache.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_law.h> -#include <asm/fsl_serdes.h> -#include <asm/fsl_portals.h> -#include <asm/fsl_liodn.h> -#include <fm_eth.h> -#include <configs/P3060QDS.h> -#include <libfdt.h> -#include <fdt_support.h> - -#include "../common/qixis.h" -#include "p3060qds.h" -#include "p3060qds_qixis.h" - -DECLARE_GLOBAL_DATA_PTR; - -int checkboard(void) -{ - u8 sw; - struct cpu_type *cpu = gd->cpu; - ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR; - unsigned int i; - - printf("Board: %s", cpu->name); - puts("QDS, "); - - printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", - QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver)); - - sw = QIXIS_READ(brdcfg[0]); - sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT; - - if (sw < 0x8) - printf("vBank: %d\n", sw); - else if (sw == 0x8) - puts("Promjet\n"); - else if (sw == 0x9) - puts("NAND\n"); - else - printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH); - - puts("Reset Configuration Word (RCW):"); - for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { - u32 rcw = in_be32(&gur->rcwsr[i]); - - if ((i % 4) == 0) - printf("\n %08x:", i * 4); - printf(" %08x", rcw); - } - puts("\n"); - - puts("SERDES Reference Clocks: "); - sw = QIXIS_READ(brdcfg[2]); - for (i = 0; i < 3; i++) { - static const char * const freq[] = {"100", "125", "Reserved", - "156.25"}; - unsigned int clock = (sw >> (2 * i)) & 3; - - printf("Bank%u=%sMhz ", i+1, freq[clock]); - } - puts("\n"); - - return 0; -} - -int board_early_init_f(void) -{ - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - /* only single DDR controller on QDS board, disable DDR1_MCK4/5 */ - setbits_be32(&gur->ddrclkdr, 0x00030000); - - return 0; -} - -void board_config_serdes_mux(void) -{ - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - int cfg = (in_be32(&gur->rcwsr[4]) & - FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26; - - switch (cfg) { - case 0x03: - case 0x06: - /* set Lane I,J as SGMII */ - QIXIS_WRITE(brdcfg[6], BRDCFG6_SD4MX_B | BRDCFG6_SD3MX_A | - BRDCFG6_SD2MX_B | BRDCFG6_SD1MX_A); - break; - case 0x16: - case 0x19: - case 0x1c: - /* set Lane I,J as Aurora Debug */ - QIXIS_WRITE(brdcfg[6], BRDCFG6_SD4MX_A | BRDCFG6_SD3MX_B | - BRDCFG6_SD2MX_A | BRDCFG6_SD1MX_B); - break; - default: - puts("Invalid SerDes protocol for P3060QDS\n"); - break; - } -} - -void board_config_usb_mux(void) -{ - u8 brdcfg4, brdcfg5, brdcfg7; - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - u32 rcwsr11 = in_be32(&gur->rcwsr[11]); - u32 ec1 = rcwsr11 & FSL_CORENET_RCWSR11_EC1; - u32 ec2 = rcwsr11 & FSL_CORENET_RCWSR11_EC2; - - brdcfg4 = QIXIS_READ(brdcfg[4]); - brdcfg4 &= ~BRDCFG4_EC_MODE_MASK; - if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_USB1) && - (ec2 == FSL_CORENET_RCWSR11_EC2_USB2)) { - brdcfg4 |= BRDCFG4_EC2_USB_EC1_USB; - - } else if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_USB1) && - ((ec2 == FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2) || - (ec2 == FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1))) { - brdcfg4 |= BRDCFG4_EC2_RGMII_EC1_USB; - - } else if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1) && - (ec2 == FSL_CORENET_RCWSR11_EC2_USB2)) { - brdcfg4 |= BRDCFG4_EC2_USB_EC1_RGMII; - - } else if ((ec1 == FSL_CORENET_RCWSR11_EC1_FM1_DTSEC1) && - ((ec2 == FSL_CORENET_RCWSR11_EC2_FM1_DTSEC2) || - (ec2 == FSL_CORENET_RCWSR11_EC2_FM2_DTSEC1))) { - brdcfg4 |= BRDCFG4_EC2_RGMII_EC1_RGMII; - } else { - brdcfg4 |= BRDCFG4_EC2_MII_EC1_MII; - } - QIXIS_WRITE(brdcfg[4], brdcfg4); - - brdcfg5 = QIXIS_READ(brdcfg[5]); - brdcfg5 &= ~(BRDCFG5_USB1ID_MASK | BRDCFG5_USB2ID_MASK); - brdcfg5 |= (BRDCFG5_USB1ID_CTRL | BRDCFG5_USB2ID_CTRL); - QIXIS_WRITE(brdcfg[5], brdcfg5); - - brdcfg7 = BRDCFG7_JTAGMX_COP_JTAG | BRDCFG7_IQ1MX_IRQ_EVT | - BRDCFG7_G1MX_USB1 | BRDCFG7_D1MX_TSEC3USB | BRDCFG7_I3MX_USB1; - QIXIS_WRITE(brdcfg[7], brdcfg7); -} - -int board_early_init_r(void) -{ - const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - const u8 flash_esel = find_tlb_idx((void *)flashbase, 1); - - /* - * Remap Boot flash + PROMJET region to caching-inhibited - * so that flash can be erased properly. - */ - - /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); - - /* invalidate existing TLB entry for flash + promjet */ - disable_tlb(flash_esel); - - set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, flash_esel, BOOKE_PAGESZ_256M, 1); - - set_liodns(); -#ifdef CONFIG_SYS_DPAA_QBMAN - setup_portals(); -#endif - board_config_serdes_mux(); - board_config_usb_mux(); - - return 0; -} - -static const char *serdes_clock_to_string(u32 clock) -{ - switch (clock) { - case SRDS_PLLCR0_RFCK_SEL_100: - return "100"; - case SRDS_PLLCR0_RFCK_SEL_125: - return "125"; - case SRDS_PLLCR0_RFCK_SEL_156_25: - return "156.25"; - default: - return "150"; - } -} - -#define NUM_SRDS_BANKS 3 - -int misc_init_r(void) -{ - serdes_corenet_t *srds_regs; - u32 actual[NUM_SRDS_BANKS]; - unsigned int i; - u8 sw; - - sw = QIXIS_READ(brdcfg[2]); - for (i = 0; i < 3; i++) { - unsigned int clock = (sw >> (2 * i)) & 3; - switch (clock) { - case 0: - actual[i] = SRDS_PLLCR0_RFCK_SEL_100; - break; - case 1: - actual[i] = SRDS_PLLCR0_RFCK_SEL_125; - break; - case 3: - actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25; - break; - default: - printf("Warning: SDREFCLK%u switch setting of '10' is " - "unsupported\n", i + 1); - break; - } - } - - srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; - for (i = 0; i < NUM_SRDS_BANKS; i++) { - u32 pllcr0 = in_be32(&srds_regs->bank[i].pllcr0); - u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK; - if (expected != actual[i]) { - printf("Warning: SERDES bank %u expects reference clock" - " %sMHz, but actual is %sMHz\n", i + 1, - serdes_clock_to_string(expected), - serdes_clock_to_string(actual[i])); - } - } - - return 0; -} - -/* - * This is map of CVDD values. 33 means CVDD is 3.3v, 25 means CVDD is 2.5v, - * 18 means CVDD is 1.8v. - */ -static u8 IO_VSEL[] = { - 33, 33, 33, 25, 25, 25, 18, 18, 18, - 33, 33, 33, 25, 25, 25, 18, 18, 18, - 33, 33, 33, 25, 25, 25, 18, 18, 18, - 33, 33, 33, 33, 33 -}; - -#define IO_VSEL_MASK 0x1f - -/* - * different CVDD selects diffenert spi flashs, read dutcfg[3] to get CVDD, - * then set status of spi flash nodes to 'disabled' according to CVDD. - * CVDD '33' will select spi flash0 and flash1, CVDD '25' will select spi - * flash2, CVDD '18' will select spi flash3. - */ -void fdt_fixup_board_spi(void *blob) -{ - u8 sw5 = QIXIS_READ(dutcfg[3]); - - switch (IO_VSEL[sw5 & IO_VSEL_MASK]) { - /* 3.3v */ - case 33: - do_fixup_by_compat(blob, "atmel,at45db081d", "status", - "disabled", strlen("disabled") + 1, 1); - do_fixup_by_compat(blob, "spansion,sst25wf040", "status", - "disabled", strlen("disabled") + 1, 1); - break; - /* 2.5v */ - case 25: - do_fixup_by_compat(blob, "spansion,s25sl12801", "status", - "disabled", strlen("disabled") + 1, 1); - do_fixup_by_compat(blob, "spansion,en25q32", "status", - "disabled", strlen("disabled") + 1, 1); - do_fixup_by_compat(blob, "spansion,sst25wf040", "status", - "disabled", strlen("disabled") + 1, 1); - break; - /* 1.8v */ - case 18: - do_fixup_by_compat(blob, "spansion,s25sl12801", "status", - "disabled", strlen("disabled") + 1, 1); - do_fixup_by_compat(blob, "spansion,en25q32", "status", - "disabled", strlen("disabled") + 1, 1); - do_fixup_by_compat(blob, "atmel,at45db081d", "status", - "disabled", strlen("disabled") + 1, 1); - break; - } -} - -void ft_board_setup(void *blob, bd_t *bd) -{ - phys_addr_t base; - phys_size_t size; - - ft_cpu_setup(blob, bd); - - base = getenv_bootm_low(); - size = getenv_bootm_size(); - - fdt_fixup_memory(blob, (u64)base, (u64)size); - -#if defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) - fdt_fixup_dr_usb(blob, bd); -#endif - -#ifdef CONFIG_PCI - pci_of_setup(blob, bd); -#endif - - fdt_fixup_liodn(blob); - fdt_fixup_dr_usb(blob, bd); - fdt_fixup_board_spi(blob); - -#ifdef CONFIG_SYS_DPAA_FMAN - fdt_fixup_fman_ethernet(blob); - fdt_fixup_board_enet(blob); -#endif -} diff --git a/board/freescale/p3060qds/p3060qds.h b/board/freescale/p3060qds/p3060qds.h deleted file mode 100644 index 3da6815..0000000 --- a/board/freescale/p3060qds/p3060qds.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __P3060QDS_H__ -#define __P3060QDS_H__ - -#include <asm/fsl_ddr_sdram.h> -#include <asm/u-boot.h> - -void fdt_fixup_board_enet(void *blob); -void pci_of_setup(void *blob, bd_t *bd); -extern fixed_ddr_parm_t fixed_ddr_parm_0[]; - -#endif diff --git a/board/freescale/p3060qds/p3060qds_qixis.h b/board/freescale/p3060qds/p3060qds_qixis.h deleted file mode 100644 index 4d5d6a2..0000000 --- a/board/freescale/p3060qds/p3060qds_qixis.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#ifndef __P3060QDS_QIXIS_H__ -#define __P3060QDS_QIXIS_H__ - -/* Definitions of QIXIS Registers for P3060QDS */ - -/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */ -#define BRDCFG4_EC_MODE_MASK 0x0F -#define BRDCFG4_EC2_MII_EC1_MII 0x00 -#define BRDCFG4_EC2_MII_EC1_USB 0x03 -#define BRDCFG4_EC2_USB_EC1_MII 0x0C -#define BRDCFG4_EC2_USB_EC1_USB 0x0F -#define BRDCFG4_EC2_USB_EC1_RGMII 0x0E -#define BRDCFG4_EC2_RGMII_EC1_USB 0x0B -#define BRDCFG4_EC2_RGMII_EC1_RGMII 0x0A -#define BRDCFG4_EMISEL_MASK 0xF0 - -#define BRDCFG5_ECLKS_MASK 0x80 -#define BRDCFG5_USB1ID_MASK 0x40 -#define BRDCFG5_USB2ID_MASK 0x20 -#define BRDCFG5_GC2MX_MASK 0x0C -#define BRDCFG5_T15MX_MASK 0x03 -#define BRDCFG5_ECLKS_IEEE1588_CM 0x80 -#define BRDCFG5_USB1ID_CTRL 0x40 -#define BRDCFG5_USB2ID_CTRL 0x20 - -#define BRDCFG6_SD1MX_A 0x01 -#define BRDCFG6_SD1MX_B 0x00 -#define BRDCFG6_SD2MX_A 0x02 -#define BRDCFG6_SD2MX_B 0x00 -#define BRDCFG6_SD3MX_A 0x04 -#define BRDCFG6_SD3MX_B 0x00 -#define BRDCFG6_SD4MX_A 0x08 -#define BRDCFG6_SD4MX_B 0x00 - -#define BRDCFG7_JTAGMX_MASK 0xC0 -#define BRDCFG7_IQ1MX_MASK 0x20 -#define BRDCFG7_G1MX_MASK 0x10 -#define BRDCFG7_D1MX_MASK 0x0C -#define BRDCFG7_I3MX_MASK 0x03 -#define BRDCFG7_JTAGMX_AURORA 0x00 -#define BRDCFG7_JTAGMX_FPGA 0x80 -#define BRDCFG7_JTAGMX_COP_JTAG 0xC0 -#define BRDCFG7_IQ1MX_IRQ_EVT 0x00 -#define BRDCFG7_IQ1MX_USB2 0x20 -#define BRDCFG7_G1MX_USB1 0x00 -#define BRDCFG7_G1MX_TSEC3 0x10 -#define BRDCFG7_D1MX_DMA 0x00 -#define BRDCFG7_D1MX_TSEC3USB 0x04 -#define BRDCFG7_D1MX_HDLC2 0x08 -#define BRDCFG7_I3MX_UART2_I2C34 0x00 -#define BRDCFG7_I3MX_GPIO_EVT 0x01 -#define BRDCFG7_I3MX_USB1 0x02 -#define BRDCFG7_I3MX_TSEC3 0x03 - -#endif diff --git a/board/genesi/mx51_efikamx/Makefile b/board/genesi/mx51_efikamx/Makefile index bd2174f..f95356f 100644 --- a/board/genesi/mx51_efikamx/Makefile +++ b/board/genesi/mx51_efikamx/Makefile @@ -27,11 +27,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := efikamx.o - -ifdef CONFIG_CMD_USB -COBJS += efikamx-usb.o -endif +COBJS := efikamx.o efikamx-usb.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/genesi/mx51_efikamx/efikamx-usb.c b/board/genesi/mx51_efikamx/efikamx-usb.c index e9273d0..cf020c3 100644 --- a/board/genesi/mx51_efikamx/efikamx-usb.c +++ b/board/genesi/mx51_efikamx/efikamx-usb.c @@ -214,3 +214,15 @@ void board_ehci_hcd_postinit(struct usb_ehci *ehci, int port) if (port) mdelay(10); } + +/* + * Ethernet on the Smarttop is on the USB bus. Rather than give an error about + * "CPU Net Initialization Failed", just pass this test since no other settings + * are required. Smartbook doesn't have built-in Ethernet but we will let it + * pass anyway considering someone may have plugged in a USB stick and all + * they need to do is run "usb start". + */ +int board_eth_init(bd_t *bis) +{ + return 0; +} diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c index 6d98c94..cfd2e93 100644 --- a/board/genesi/mx51_efikamx/efikamx.c +++ b/board/genesi/mx51_efikamx/efikamx.c @@ -492,9 +492,6 @@ int board_late_init(void) ARRAY_SIZE(efikamx_pata_pads)); setup_iomux_usb(); - if (machine_is_efikasb()) - setenv("preboot", "usb reset ; setenv stdin usbkbd\0"); - return 0; } diff --git a/board/keymile/common/ivm.c b/board/keymile/common/ivm.c index 9bc3c21..eaa924f 100644 --- a/board/keymile/common/ivm.c +++ b/board/keymile/common/ivm.c @@ -163,7 +163,7 @@ static int ivm_findinventorystring(int type, if (addr == INVENTORYDATASIZE) { xcode = -1; printf("Error end of string not found\n"); - } else if ((size >= (maxlen - 1)) && + } else if ((size > (maxlen - 1)) && (buf[addr] != '\r')) { xcode = -1; printf("string too long till next CR\n"); diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 930c80e..be8f51c 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -331,26 +331,6 @@ void board_spi_release_bus(struct spi_slave *slave) kw_gpio_set_value(KM_FLASH_GPIO_PIN, 1); } -int dram_init(void) -{ - /* dram_init must store complete ramsize in gd->ram_size */ - /* Fix this */ - gd->ram_size = get_ram_size((void *)kw_sdram_bar(0), - kw_sdram_bs(0)); - return 0; -} - -void dram_init_banksize(void) -{ - int i; - - for (i = 0; i < CONFIG_NR_DRAM_BANKS; i++) { - gd->bd->bi_dram[i].start = kw_sdram_bar(i); - gd->bd->bi_dram[i].size = get_ram_size((long *)kw_sdram_bar(i), - kw_sdram_bs(i)); - } -} - #if (defined(CONFIG_KM_PIGGY4_88E6061)) #define PHY_LED_SEL_REG 0x18 diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index 7ab2040..afe832a 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -45,8 +45,8 @@ DECLARE_GLOBAL_DATA_PTR; -const struct tegra20_sysinfo sysinfo = { - CONFIG_TEGRA20_BOARD_STRING +const struct tegra_sysinfo sysinfo = { + CONFIG_TEGRA_BOARD_STRING }; #ifndef CONFIG_SPL_BUILD @@ -79,7 +79,7 @@ void pin_mux_spi(void) __attribute__((weak, alias("__pin_mux_spi"))); static void power_det_init(void) { #if defined(CONFIG_TEGRA20) - struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA20_PMC_BASE; + struct pmc_ctlr *const pmc = (struct pmc_ctlr *)NV_PA_PMC_BASE; /* turn off power detects */ writel(0, &pmc->pmc_pwr_det_latch); @@ -132,7 +132,7 @@ int board_init(void) board_usb_init(gd->fdt_blob); #endif -#ifdef CONFIG_TEGRA20_LP0 +#ifdef CONFIG_TEGRA_LP0 /* save Sdram params to PMC 2, 4, and 24 for WB0 */ warmboot_save_sdram_params(); diff --git a/board/nvidia/dts/tegra20-harmony.dts b/board/nvidia/dts/tegra20-harmony.dts index c351954..ca5facb 100644 --- a/board/nvidia/dts/tegra20-harmony.dts +++ b/board/nvidia/dts/tegra20-harmony.dts @@ -54,4 +54,14 @@ usb@c5004000 { status = "disabled"; }; + + nand-controller@70008000 { + nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */ + nvidia,width = <8>; + nvidia,timing = <26 100 20 80 20 10 12 10 70>; + nand@0 { + reg = <0>; + compatible = "hynix,hy27uf4g2b", "nand-flash"; + }; + }; }; diff --git a/board/nvidia/dts/tegra20-seaboard.dts b/board/nvidia/dts/tegra20-seaboard.dts index 3352539..25a63a0 100644 --- a/board/nvidia/dts/tegra20-seaboard.dts +++ b/board/nvidia/dts/tegra20-seaboard.dts @@ -153,4 +153,14 @@ 0x1f04008a>; linux,fn-keymap = <0x05040002>; }; + + nand-controller@70008000 { + nvidia,wp-gpios = <&gpio 59 0>; /* PH3 */ + nvidia,width = <8>; + nvidia,timing = <26 100 20 80 20 10 12 10 70>; + nand@0 { + reg = <0>; + compatible = "hynix,hy27uf4g2b", "nand-flash"; + }; + }; }; diff --git a/board/nvidia/harmony/Makefile b/board/nvidia/harmony/Makefile index b6efa1c..88b9dcf 100644 --- a/board/nvidia/harmony/Makefile +++ b/board/nvidia/harmony/Makefile @@ -24,10 +24,6 @@ include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - LIB = $(obj)lib$(BOARD).o COBJS := $(BOARD).o diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c index 44977c7..b4a811d 100644 --- a/board/nvidia/harmony/harmony.c +++ b/board/nvidia/harmony/harmony.c @@ -73,11 +73,11 @@ int board_mmc_init(bd_t *bd) debug("board_mmc_init: init SD slot J26\n"); /* init dev 0, SD slot J26, with 4-bit bus */ /* The board has an 8-bit bus, but 8-bit doesn't work yet */ - tegra20_mmc_init(0, 4, GPIO_PI6, GPIO_PH2); + tegra_mmc_init(0, 4, GPIO_PI6, GPIO_PH2); debug("board_mmc_init: init SD slot J5\n"); /* init dev 2, SD slot J5, with 4-bit bus */ - tegra20_mmc_init(2, 4, GPIO_PT3, GPIO_PI5); + tegra_mmc_init(2, 4, GPIO_PT3, GPIO_PI5); return 0; } diff --git a/board/nvidia/seaboard/Makefile b/board/nvidia/seaboard/Makefile index b6efa1c..88b9dcf 100644 --- a/board/nvidia/seaboard/Makefile +++ b/board/nvidia/seaboard/Makefile @@ -24,10 +24,6 @@ include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - LIB = $(obj)lib$(BOARD).o COBJS := $(BOARD).o diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c index 3298a6b..667f60a 100644 --- a/board/nvidia/seaboard/seaboard.c +++ b/board/nvidia/seaboard/seaboard.c @@ -81,11 +81,11 @@ int board_mmc_init(bd_t *bd) debug("board_mmc_init: init eMMC\n"); /* init dev 0, eMMC chip, with 4-bit bus */ /* The board has an 8-bit bus, but 8-bit doesn't work yet */ - tegra20_mmc_init(0, 4, -1, -1); + tegra_mmc_init(0, 4, -1, -1); debug("board_mmc_init: init SD slot\n"); /* init dev 1, SD slot, with 4-bit bus */ - tegra20_mmc_init(1, 4, GPIO_PI6, GPIO_PI5); + tegra_mmc_init(1, 4, GPIO_PI6, GPIO_PI5); return 0; } diff --git a/board/nvidia/ventana/Makefile b/board/nvidia/ventana/Makefile index e3b7435..147d0bc 100644 --- a/board/nvidia/ventana/Makefile +++ b/board/nvidia/ventana/Makefile @@ -24,9 +24,7 @@ include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common $(obj)../seaboard) -endif +$(shell mkdir -p $(obj)../seaboard) LIB = $(obj)lib$(BOARD).o diff --git a/board/nvidia/whistler/Makefile b/board/nvidia/whistler/Makefile index a910577..913f1ce 100644 --- a/board/nvidia/whistler/Makefile +++ b/board/nvidia/whistler/Makefile @@ -24,10 +24,6 @@ include $(TOPDIR)/config.mk -ifneq ($(OBJTREE),$(SRCTREE)) -$(shell mkdir -p $(obj)../common) -endif - LIB = $(obj)lib$(BOARD).o COBJS := $(BOARD).o diff --git a/board/nvidia/whistler/whistler.c b/board/nvidia/whistler/whistler.c index c0a114d..598b2e5 100644 --- a/board/nvidia/whistler/whistler.c +++ b/board/nvidia/whistler/whistler.c @@ -81,10 +81,10 @@ int board_mmc_init(bd_t *bd) pin_mux_mmc(); /* init dev 0 (SDMMC4), (J29 "HSMMC") with 8-bit bus */ - tegra20_mmc_init(0, 8, -1, -1); + tegra_mmc_init(0, 8, -1, -1); /* init dev 1 (SDMMC3), (J40 "SDIO3") with 8-bit bus */ - tegra20_mmc_init(1, 8, -1, -1); + tegra_mmc_init(1, 8, -1, -1); return 0; } diff --git a/board/qi/qi_lb60/qi_lb60.c b/board/qi/qi_lb60/qi_lb60.c index 3583d01..d975209 100644 --- a/board/qi/qi_lb60/qi_lb60.c +++ b/board/qi/qi_lb60/qi_lb60.c @@ -69,7 +69,7 @@ static void gpio_init(void) static void cpm_init(void) { struct jz4740_cpm *cpm = (struct jz4740_cpm *)JZ4740_CPM_BASE; - uint32_t reg = readw(&cpm->clkgr); + uint32_t reg = readl(&cpm->clkgr); reg |= CPM_CLKGR_IPU | CPM_CLKGR_CIM | @@ -81,7 +81,7 @@ static void cpm_init(void) CPM_CLKGR_UDC | CPM_CLKGR_AIC1; - writew(reg, &cpm->clkgr); + writel(reg, &cpm->clkgr); } int board_early_init_f(void) diff --git a/board/freescale/p3060qds/Makefile b/board/samsung/common/Makefile index ae136f4..0bcd594 100644 --- a/board/freescale/p3060qds/Makefile +++ b/board/samsung/common/Makefile @@ -1,7 +1,6 @@ # -# Copyright 2011 Freescale Semiconductor, Inc. -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# Copyright (C) 2012 Samsung Electronics +# Lukasz Majewski <l.majewski@samsung.com> # # See file CREDITS for list of people who contributed to this # project. @@ -24,26 +23,16 @@ include $(TOPDIR)/config.mk -LIB = $(obj)lib$(BOARD).o +LIB = $(obj)libsamsung.o -COBJS-y += $(BOARD).o -COBJS-y += ddr.o -COBJS-y += eth.o -COBJS-y += fixed_ddr.o +COBJS-$(CONFIG_SOFT_I2C_MULTI_BUS) += multi_i2c.o -SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +SRCS := $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) -SOBJS := $(addprefix $(obj),$(SOBJS)) -$(LIB): $(obj).depend $(OBJS) $(SOBJS) +$(LIB): $(obj).depend $(OBJS) $(call cmd_link_o_target, $(OBJS)) -clean: - rm -f $(OBJS) $(SOBJS) - -distclean: clean - rm -f $(LIB) core *.bak .depend - ######################################################################### # defines $(obj).depend target diff --git a/board/samsung/common/multi_i2c.c b/board/samsung/common/multi_i2c.c new file mode 100644 index 0000000..d6c3d37 --- /dev/null +++ b/board/samsung/common/multi_i2c.c @@ -0,0 +1,65 @@ +/* + * Copyright (C) 2012 Samsung Electronics + * Lukasz Majewski <l.majewski@samsung.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <i2c.h> + +/* Handle multiple I2C buses instances */ +int get_multi_scl_pin(void) +{ + unsigned int bus = I2C_GET_BUS(); + + switch (bus) { + case I2C_0: /* I2C_0 definition - compatibility layer */ + case I2C_5: + return CONFIG_SOFT_I2C_I2C5_SCL; + case I2C_9: + return CONFIG_SOFT_I2C_I2C9_SCL; + default: + printf("I2C_%d not supported!\n", bus); + }; + + return 0; +} + +int get_multi_sda_pin(void) +{ + unsigned int bus = I2C_GET_BUS(); + + switch (bus) { + case I2C_0: /* I2C_0 definition - compatibility layer */ + case I2C_5: + return CONFIG_SOFT_I2C_I2C5_SDA; + case I2C_9: + return CONFIG_SOFT_I2C_I2C9_SDA; + default: + printf("I2C_%d not supported!\n", bus); + }; + + return 0; +} + +int multi_i2c_init(void) +{ + return 0; +} diff --git a/board/samsung/goni/lowlevel_init.S b/board/samsung/goni/lowlevel_init.S index 30a5835..1effc9c 100644 --- a/board/samsung/goni/lowlevel_init.S +++ b/board/samsung/goni/lowlevel_init.S @@ -79,11 +79,7 @@ skip_check_didle: str r1, [r0, #0x0] @ GPIO_CON_OFFSET ldr r1, [r0, #0x4] @ GPIO_DAT_OFFSET -#ifdef CONFIG_ONENAND_IPL - orr r1, r1, #(1 << 1) @ 1 * 1-bit -#else bic r1, r1, #(1 << 1) -#endif str r1, [r0, #0x4] @ GPIO_DAT_OFFSET /* Don't setup at s5pc100 */ @@ -182,7 +178,6 @@ skip_check_didle: /* Do not release retention here for S5PC110 */ streq r1, [r0] -#ifndef CONFIG_ONENAND_IPL /* Disable Watchdog */ ldreq r0, =S5PC100_WATCHDOG_BASE @ 0xEA200000 ldrne r0, =S5PC110_WATCHDOG_BASE @ 0xE2700000 @@ -193,7 +188,6 @@ skip_check_didle: ldrne r0, =S5PC110_SROMC_BASE ldr r1, =0x9 str r1, [r0] -#endif /* S5PC100 has 3 groups of interrupt sources */ ldreq r0, =S5PC100_VIC0_BASE @ 0xE4000000 @@ -207,7 +201,6 @@ skip_check_didle: str r3, [r1, #0x14] @ INTENCLEAR str r3, [r2, #0x14] @ INTENCLEAR -#ifndef CONFIG_ONENAND_IPL /* Set all interrupts as IRQ */ str r5, [r0, #0xc] @ INTSELECT str r5, [r1, #0xc] @ INTSELECT @@ -217,120 +210,12 @@ skip_check_didle: str r5, [r0, #0xf00] @ INTADDRESS str r5, [r1, #0xf00] @ INTADDRESS str r5, [r2, #0xf00] @ INTADDRESS -#endif -#ifndef CONFIG_ONENAND_IPL /* for UART */ bl uart_asm_init bl internal_ram_init -#endif - -#ifdef CONFIG_ONENAND_IPL - /* init system clock */ - bl system_clock_init - - /* OneNAND Sync Read Support at S5PC110 only - * RM[15] : Sync Read - * BRWL[14:12] : 7 CLK - * BL[11:9] : Continuous - * VHF[3] : Very High Frequency Enable (Over 83MHz) - * HF[2] : High Frequency Enable (Over 66MHz) - * WM[1] : Sync Write - */ - cmp r7, r8 - ldrne r1, =0xE006 - ldrne r0, =0xB001E442 - strneh r1, [r0] - - /* - * GCE[26] : Gated Clock Enable - * RPE[17] : Enables Read Prefetch - */ - ldrne r1, =((1 << 26) | (1 << 17) | 0xE006) - ldrne r0, =0xB0600000 - strne r1, [r0, #0x100] @ ONENAND_IF_CTRL - ldrne r1, =0x1212 - strne r1, [r0, #0x108] - - /* Board detection to set proper memory configuration */ - cmp r7, r8 - moveq r9, #1 /* r9 has 1Gib default at s5pc100 */ - movne r9, #2 /* r9 has 2Gib default at s5pc110 */ - - ldr r2, =0xE0200200 - ldr r4, [r2, #0x48] - - bic r1, r4, #(0x3F << 4) /* PULLUP_DISABLE: 3 * 2-bit */ - bic r1, r1, #(0x3 << 2) /* PULLUP_DISABLE: 2 * 2-bit */ - bic r1, r1, #(0x3 << 14) /* PULLUP_DISABLE: 2 * 2-bit */ - str r1, [r2, #0x48] - /* For write completion */ - nop - nop - - ldr r3, [r2, #0x44] - and r1, r3, #(0x7 << 2) - mov r1, r1, lsr #2 - cmp r1, #0x5 - moveq r9, #3 - cmp r1, #0x6 - moveq r9, #1 - cmp r1, #0x7 - moveq r9, #2 - and r0, r3, #(0x1 << 1) - mov r0, r0, lsr #1 - orr r1, r1, r0, lsl #3 - cmp r1, #0x8 - moveq r9, #3 - and r1, r3, #(0x7 << 2) - mov r1, r1, lsr #2 - and r0, r3, #(0x1 << 7) - mov r0, r0, lsr #7 - orr r1, r1, r0, lsl #3 - cmp r1, #0x9 - moveq r9, #3 - str r4, [r2, #0x48] /* Restore PULLUP configuration */ - - bl mem_ctrl_asm_init - - /* Wakeup support. Don't know if it's going to be used, untested. */ - ldreq r0, =S5PC100_RST_STAT - ldrne r0, =S5PC110_RST_STAT - ldr r1, [r0] - biceq r1, r1, #0xfffffff7 - moveq r2, #(1 << 3) - bicne r1, r1, #0xfffeffff - movne r2, #(1 << 16) - cmp r1, r2 - bne 1f -wakeup: - /* turn off L2 cache */ - bl l2_cache_disable - - cmp r7, r8 - ldreq r0, =0xC100 - ldrne r0, =0xC110 - - /* invalidate L2 cache also */ - bl invalidate_dcache - - /* turn on L2 cache */ - bl l2_cache_enable - - cmp r7, r8 - /* Load return address and jump to kernel */ - ldreq r0, =S5PC100_INFORM0 - ldrne r0, =S5PC110_INFORM0 - - /* r1 = physical address of s5pc1xx_cpu_resume function */ - ldr r1, [r0] - /* Jump to kernel (sleep-s5pc1xx.S) */ - mov pc, r1 - nop - nop -#else cmp r7, r8 /* Clear wakeup status register */ ldreq r0, =S5PC100_WAKEUP_STAT @@ -347,7 +232,6 @@ wakeup: orr r1, r1, r2 str r1, [r0] -#endif b 1f didle_wakeup: @@ -517,7 +401,6 @@ system_clock_init: mov pc, lr -#ifndef CONFIG_ONENAND_IPL internal_ram_init: ldreq r0, =0xE3800000 ldrne r0, =0xF1500000 @@ -525,9 +408,7 @@ internal_ram_init: str r1, [r0] mov pc, lr -#endif -#ifndef CONFIG_ONENAND_IPL /* * uart_asm_init: Initialize UART's pins */ @@ -582,4 +463,3 @@ uart_asm_init: str r1, [r0, #0x4] @ S5PC1XX_GPIO_DAT_OFFSET 200: mov pc, lr -#endif diff --git a/board/samsung/smdkc100/lowlevel_init.S b/board/samsung/smdkc100/lowlevel_init.S index 6d18835..6f9a554 100644 --- a/board/samsung/smdkc100/lowlevel_init.S +++ b/board/samsung/smdkc100/lowlevel_init.S @@ -50,12 +50,10 @@ lowlevel_init: orr r0, r0, #0x0 str r5, [r0] -#ifndef CONFIG_ONENAND_IPL /* setting SRAM */ ldr r0, =S5PC100_SROMC_BASE ldr r1, =0x9 str r1, [r0] -#endif /* S5PC100 has 3 groups of interrupt sources */ ldr r0, =S5PC100_VIC0_BASE @0xE4000000 @@ -68,7 +66,6 @@ lowlevel_init: str r3, [r1, #0x14] @INTENCLEAR str r3, [r2, #0x14] @INTENCLEAR -#ifndef CONFIG_ONENAND_IPL /* Set all interrupts as IRQ */ str r5, [r0, #0xc] @INTSELECT str r5, [r1, #0xc] @INTSELECT @@ -78,54 +75,17 @@ lowlevel_init: str r5, [r0, #0xf00] @INTADDRESS str r5, [r1, #0xf00] @INTADDRESS str r5, [r2, #0xf00] @INTADDRESS -#endif -#ifndef CONFIG_ONENAND_IPL /* for UART */ bl uart_asm_init /* for TZPC */ bl tzpc_asm_init -#endif - -#ifdef CONFIG_ONENAND_IPL - /* init system clock */ - bl system_clock_init - - bl mem_ctrl_asm_init - - /* Wakeup support. Don't know if it's going to be used, untested. */ - ldr r0, =S5PC100_RST_STAT - ldr r1, [r0] - bic r1, r1, #0xfffffff7 - cmp r1, #0x8 - beq wakeup_reset -#endif 1: mov lr, r9 mov pc, lr -#ifdef CONFIG_ONENAND_IPL -wakeup_reset: - - /* Clear wakeup status register */ - ldr r0, =S5PC100_WAKEUP_STAT - ldr r1, [r0] - str r1, [r0] - - /* Load return address and jump to kernel */ - ldr r0, =S5PC100_INFORM0 - - /* r1 = physical address of s5pc100_cpu_resume function */ - ldr r1, [r0] - - /* Jump to kernel (sleep.S) */ - mov pc, r1 - nop - nop -#endif - /* * system_clock_init: Initialize core clock and bus clock. * void system_clock_init(void) @@ -178,7 +138,6 @@ system_clock_init: mov pc, lr -#ifndef CONFIG_ONENAND_IPL /* * uart_asm_init: Initialize UART's pins */ @@ -212,4 +171,3 @@ tzpc_asm_init: str r1, [r0, #0x810] mov pc, lr -#endif diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index 4f9cb5a..e11a892 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -75,6 +75,21 @@ int board_init(void) return 0; } +void i2c_init_board(void) +{ + struct exynos4_gpio_part1 *gpio1 = + (struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1(); + struct exynos4_gpio_part2 *gpio2 = + (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2(); + + /* I2C_5 -> PMIC */ + s5p_gpio_direction_output(&gpio1->b, 7, 1); + s5p_gpio_direction_output(&gpio1->b, 6, 1); + /* I2C_9 -> FG */ + s5p_gpio_direction_output(&gpio2->y4, 0, 1); + s5p_gpio_direction_output(&gpio2->y4, 1, 1); +} + int dram_init(void) { gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) + diff --git a/board/taskit/stamp9g20/stamp9g20.c b/board/taskit/stamp9g20/stamp9g20.c index 5e07bf8..06df0af 100644 --- a/board/taskit/stamp9g20/stamp9g20.c +++ b/board/taskit/stamp9g20/stamp9g20.c @@ -159,15 +159,28 @@ int board_early_init_f(void) return 0; } -int board_init(void) +int board_postclk_init(void) { - /* Adress of boot parameters */ - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + /* + * Initialize the serial interface here, because be need a running + * timer to set PC9 to high and wait for some time to enable the + * level converter of the RS232 interface on the PortuxG20 board. + */ - /* Enable the serial interface */ +#ifdef CONFIG_PORTUXG20 at91_set_gpio_output(AT91_PIN_PC9, 1); + mdelay(1); +#endif at91_seriald_hw_init(); + return 0; +} + +int board_init(void) +{ + /* Adress of boot parameters */ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + stamp9G20_nand_hw_init(); #ifdef CONFIG_MACB stamp9G20_macb_hw_init(); diff --git a/board/technexion/twister/twister.c b/board/technexion/twister/twister.c index c2b10ac..7429e93 100644 --- a/board/technexion/twister/twister.c +++ b/board/technexion/twister/twister.c @@ -100,8 +100,18 @@ int board_init(void) int misc_init_r(void) { + char *eth_addr; + dieid_num_r(); + eth_addr = getenv("ethaddr"); + if (eth_addr) + return 0; + +#ifndef CONFIG_SPL_BUILD + TAM3517_READ_MAC_FROM_EEPROM; +#endif + return 0; } diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c index 9fbaedd..b8ad447 100644 --- a/board/teejet/mt_ventoux/mt_ventoux.c +++ b/board/teejet/mt_ventoux/mt_ventoux.c @@ -21,13 +21,17 @@ #include <common.h> #include <netdev.h> +#include <malloc.h> #include <fpga.h> +#include <video_fb.h> #include <asm/io.h> #include <asm/arch/mem.h> #include <asm/arch/mux.h> #include <asm/arch/sys_proto.h> #include <asm/omap_gpio.h> #include <asm/arch/mmc_host_def.h> +#include <asm/arch/dss.h> +#include <asm/arch/clocks.h> #include <i2c.h> #include <spartan3.h> #include <asm/gpio.h> @@ -39,6 +43,9 @@ DECLARE_GLOBAL_DATA_PTR; +#define BUZZER 140 +#define SPEAKER 141 + #ifndef CONFIG_FPGA #error "The Teejet mt_ventoux must have CONFIG_FPGA enabled" #endif @@ -50,6 +57,42 @@ DECLARE_GLOBAL_DATA_PTR; #define FPGA_INIT 119 #define FPGA_DONE 154 +#define LCD_PWR 138 +#define LCD_PON_PIN 139 + +#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD) +static struct { + u32 xres; + u32 yres; +} panel_resolution[] = { + { 480, 272 }, + { 800, 480 } +}; + +static struct panel_config lcd_cfg[] = { + { + .timing_h = PANEL_TIMING_H(4, 8, 41), + .timing_v = PANEL_TIMING_V(2, 4, 10), + .pol_freq = 0x00000000, /* Pol Freq */ + .divisor = 0x0001000d, /* 33Mhz Pixel Clock */ + .panel_type = 0x01, /* TFT */ + .data_lines = 0x03, /* 24 Bit RGB */ + .load_mode = 0x02, /* Frame Mode */ + .panel_color = 0, + }, + { + .timing_h = PANEL_TIMING_H(20, 192, 4), + .timing_v = PANEL_TIMING_V(2, 20, 10), + .pol_freq = 0x00004000, /* Pol Freq */ + .divisor = 0x0001000E, /* 36Mhz Pixel Clock */ + .panel_type = 0x01, /* TFT */ + .data_lines = 0x03, /* 24 Bit RGB */ + .load_mode = 0x02, /* Frame Mode */ + .panel_color = 0, + } +}; +#endif + /* Timing definitions for FPGA */ static const u32 gpmc_fpga[] = { FPGA_GPMC_CONFIG1, @@ -193,6 +236,33 @@ int board_init(void) mt_ventoux_init_fpga(); + /* GPIO_140: speaker #mute */ + MUX_VAL(CP(MCBSP3_DX), (IEN | PTU | EN | M4)) + /* GPIO_141: Buzz Hi */ + MUX_VAL(CP(MCBSP3_DR), (IEN | PTU | EN | M4)) + + /* Turning off the buzzer */ + gpio_request(BUZZER, "BUZZER_MUTE"); + gpio_request(SPEAKER, "SPEAKER"); + gpio_direction_output(BUZZER, 0); + gpio_direction_output(SPEAKER, 0); + + return 0; +} + +int misc_init_r(void) +{ + char *eth_addr; + + dieid_num_r(); + + eth_addr = getenv("ethaddr"); + if (eth_addr) + return 0; + +#ifndef CONFIG_SPL_BUILD + TAM3517_READ_MAC_FROM_EEPROM; +#endif return 0; } @@ -224,3 +294,46 @@ int board_mmc_init(bd_t *bis) return omap_mmc_init(0, 0, 0); } #endif + +#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD) +int board_video_init(void) +{ + struct prcm *prcm_base = (struct prcm *)PRCM_BASE; + struct panel_config *panel = &lcd_cfg[0]; + char *s; + u32 index = 0; + + void *fb; + + fb = (void *)0x88000000; + + s = getenv("panel"); + if (s) { + index = simple_strtoul(s, NULL, 10); + if (index < ARRAY_SIZE(lcd_cfg)) + panel = &lcd_cfg[index]; + else + return 0; + } + + panel->frame_buffer = fb; + printf("Panel: %dx%d\n", panel_resolution[index].xres, + panel_resolution[index].yres); + panel->lcd_size = (panel_resolution[index].yres - 1) << 16 | + (panel_resolution[index].xres - 1); + + gpio_request(LCD_PWR, "LCD Power"); + gpio_request(LCD_PON_PIN, "LCD Pon"); + gpio_direction_output(LCD_PWR, 0); + gpio_direction_output(LCD_PON_PIN, 1); + + + setbits_le32(&prcm_base->fclken_dss, FCK_DSS_ON); + setbits_le32(&prcm_base->iclken_dss, ICK_DSS_ON); + + omap3_dss_panel_config(panel); + omap3_dss_enable(); + + return 0; +} +#endif diff --git a/board/teejet/mt_ventoux/mt_ventoux.h b/board/teejet/mt_ventoux/mt_ventoux.h index 9b2e43e..1cd7ec2 100644 --- a/board/teejet/mt_ventoux/mt_ventoux.h +++ b/board/teejet/mt_ventoux/mt_ventoux.h @@ -142,7 +142,8 @@ const omap3_sysinfo sysinfo = { /*GPIO_62: FPGA_RESET */ \ MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M4)) \ MUX_VAL(CP(GPMC_WAIT1), (IEN | PTU | EN | M4)) \ - MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) /*GPIO_64*/ \ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | EN | M4)) \ + /* GPIO_64*/ \ MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4)) \ /* DSS */\ MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0)) \ @@ -174,26 +175,6 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0)) \ /* CAMERA */\ - MUX_VAL(CP(CAM_HS), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(CAM_VS), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(CAM_XCLKA), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_PCLK), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(CAM_FLD), (IDIS | PTD | DIS | M4)) /*GPIO_98*/\ - MUX_VAL(CP(CAM_D0), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D1), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D2), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D3), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D4), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D5), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D6), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D7), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D8), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D9), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D10), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_D11), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_XCLKB), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(CAM_WEN), (IEN | PTD | DIS | M4)) /*GPIO_167*/\ - MUX_VAL(CP(CAM_STROBE), (IDIS | PTD | DIS | M0)) \ MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) \ MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) \ MUX_VAL(CP(CSI2_DX1), (IEN | PTD | DIS | M0)) \ @@ -209,6 +190,7 @@ const omap3_sysinfo sysinfo = { /* GPIO_126: CardDetect */\ MUX_VAL(CP(MMC1_DAT5), (IEN | PTU | EN | M4)) \ MUX_VAL(CP(MMC1_DAT6), (IEN | PTU | EN | M4)) \ + /*GPIO_128 */ \ MUX_VAL(CP(MMC1_DAT7), (IEN | PTU | EN | M4)) \ \ MUX_VAL(CP(MMC2_CLK), (IEN | PTU | EN | M0)) /*MMC2_CLK*/\ @@ -221,7 +203,7 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(MMC2_DAT5), (IDIS | PTU | EN | M4)) \ MUX_VAL(CP(MMC2_DAT6), (IDIS | PTU | EN | M4)) \ /* GPIO_138: LCD_ENVD */\ - MUX_VAL(CP(MMC2_DAT7), (IDIS | PTU | EN | M4)) \ + MUX_VAL(CP(MMC2_DAT7), (IDIS | PTD | EN | M4)) \ /* GPIO_139: LCD_PON */\ /* McBSP */\ MUX_VAL(CP(MCBSP_CLKS), (IEN | PTU | DIS | M0)) \ @@ -241,16 +223,12 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(MCBSP2_DX), (IEN | PTD | EN | M4)) \ /* GPIO_119: FPGA_INIT */ \ \ - MUX_VAL(CP(MCBSP3_DX), (IEN | PTU | EN | M4)) \ - /* GPIO_140: speaker #mute */\ - MUX_VAL(CP(MCBSP3_DR), (IEN | PTU | EN | M4)) \ - /* GPIO_141: Buzz Hi */\ MUX_VAL(CP(MCBSP3_CLKX), (IEN | PTU | EN | M4)) \ MUX_VAL(CP(MCBSP3_FSX), (IEN | PTU | EN | M4)) \ \ MUX_VAL(CP(MCBSP4_CLKX), (IEN | PTD | DIS | M4)) \ /*GPIO_152: Ignition Sense */ \ - MUX_VAL(CP(MCBSP4_DR), (IDIS | PTD | DIS | M4)) \ + MUX_VAL(CP(MCBSP4_DR), (IEN | PTD | DIS | M4)) \ /*GPIO_153: Power Button Sense */ \ MUX_VAL(CP(MCBSP4_DX), (IEN | PTU | DIS | M4)) \ /* GPIO_154: FPGA_DONE */ \ @@ -264,10 +242,14 @@ const omap3_sysinfo sysinfo = { /* GPIO_150: USB status 1 */\ \ MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(UART2_RTS), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(UART2_TX), (IDIS | PTD | DIS | M0)) \ - MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M2)) \ + /* gpt9_pwm */\ + MUX_VAL(CP(UART2_RTS), (IEN | PTD | DIS | M2)) \ + /* gpt10_pwm */\ + MUX_VAL(CP(UART2_TX), (IEN | PTD | DIS | M2)) \ + /* gpt8_pwm */\ + MUX_VAL(CP(UART2_RX), (IEN | PTD | DIS | M2)) \ + /* gpt11_pwm */\ \ MUX_VAL(CP(UART3_CTS_RCTX), (IDIS | PTD | DIS | M4)) \ /*GPIO_163 : TS_PENIRQ*/ \ @@ -299,22 +281,24 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M4)) \ MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M0)) \ /* CCDC */\ - MUX_VAL(CP(CCDC_PCLK), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CCDC_PCLK), (IEN | PTU | EN | M4)) \ + /* GPIO94 */\ MUX_VAL(CP(CCDC_FIELD), (IEN | PTD | DIS | M4)) \ /* GPIO95: #Enable Output */\ - MUX_VAL(CP(CCDC_HD), (IEN | PTU | EN | M0)) \ - MUX_VAL(CP(CCDC_VD), (IEN | PTU | EN | M0)) \ + MUX_VAL(CP(CCDC_HD), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(CCDC_VD), (IEN | PTU | EN | M4)) \ MUX_VAL(CP(CCDC_WEN), (IEN | PTD | DIS | M4)) \ /* GPIO 99: #SOM_PWR_OFF */\ - MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA0), (IEN | PTD | DIS | M4)) \ MUX_VAL(CP(CCDC_DATA1), (IEN | PTD | DIS | M4)) \ /* GPIO_100: #power out */\ - MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CCDC_DATA3), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(CCDC_DATA7), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(CCDC_DATA2), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(CCDC_DATA3), (IEN | PTD | DIS | M4)) \ + /* GPIO_102 */\ + MUX_VAL(CP(CCDC_DATA4), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(CCDC_DATA5), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(CCDC_DATA6), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(CCDC_DATA7), (IEN | PTD | DIS | M4)) \ /* RMII */\ MUX_VAL(CP(RMII_MDIO_DATA), (IEN | M0)) \ MUX_VAL(CP(RMII_MDIO_CLK), (M0)) \ @@ -363,7 +347,8 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(SYS_BOOT8), (IEN | PTD | EN | M0)) \ \ MUX_VAL(CP(SYS_OFF_MODE), (IEN | PTD | DIS | M0)) \ - MUX_VAL(CP(SYS_CLKOUT1), (IEN | PTD | DIS | M0)) \ + MUX_VAL(CP(SYS_CLKOUT1), (IDIS | PTD | DIS | M4)) \ + /* gpio_10 */\ MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M0)) \ /* JTAG */\ MUX_VAL(CP(JTAG_nTRST), (IEN | PTD | DIS | M0)) \ @@ -387,12 +372,15 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | EN | M3)) \ MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | EN | M3)) \ MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | EN | M3)) \ - MUX_VAL(CP(ETK_D10_ES2), (IEN | PTU | EN | M4)) \ + MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | EN | M4)) \ + /* gpio_24 */\ MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTD | DIS | M4)) \ - MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M3)) \ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M4)) \ + /* gpio_26 */\ MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M3)) \ - MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M3)) \ - MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M3)) \ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M4)) \ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M4)) \ + /* gpio_29 */\ /* Die to Die */\ MUX_VAL(CP(D2D_MCAD34), (IEN | PTD | EN | M0)) \ MUX_VAL(CP(D2D_MCAD35), (IEN | PTD | EN | M0)) \ diff --git a/board/xilinx/microblaze-generic/microblaze-generic.c b/board/xilinx/microblaze-generic/microblaze-generic.c index a1e2bfe..b75e62c 100644 --- a/board/xilinx/microblaze-generic/microblaze-generic.c +++ b/board/xilinx/microblaze-generic/microblaze-generic.c @@ -28,6 +28,7 @@ #include <common.h> #include <config.h> #include <netdev.h> +#include <asm/processor.h> #include <asm/microblaze_intc.h> #include <asm/asm.h> @@ -69,6 +70,14 @@ int fsl_init2 (void) { } #endif +void board_init(void) +{ + gpio_init(); +#ifdef CONFIG_SYS_FSL_2 + fsl_init2(); +#endif +} + int board_eth_init(bd_t *bis) { int ret = 0; |