diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/altera/socfpga/Makefile | 4 | ||||
| -rw-r--r-- | board/altera/socfpga/pinmux_config.c | 214 | ||||
| -rw-r--r-- | board/altera/socfpga/pinmux_config.h | 54 | ||||
| -rw-r--r-- | board/isee/igep0033/board.c | 5 | ||||
| -rw-r--r-- | board/phytec/pcm051/board.c | 1 | ||||
| -rw-r--r-- | board/ti/omap1510inn/Makefile | 29 | ||||
| -rw-r--r-- | board/ti/omap1510inn/config.mk | 25 | ||||
| -rw-r--r-- | board/ti/omap1510inn/lowlevel_init.S | 380 | ||||
| -rw-r--r-- | board/ti/omap1510inn/omap1510innovator.c | 125 |
9 files changed, 275 insertions, 562 deletions
diff --git a/board/altera/socfpga/Makefile b/board/altera/socfpga/Makefile index 101fc7c..9dc45a9 100644 --- a/board/altera/socfpga/Makefile +++ b/board/altera/socfpga/Makefile @@ -10,8 +10,10 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := socfpga_cyclone5.o +COBJS-y := socfpga_cyclone5.o +COBJS-$(CONFIG_SPL_BUILD) += pinmux_config.o +COBJS := $(COBJS-y) SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/altera/socfpga/pinmux_config.c b/board/altera/socfpga/pinmux_config.c new file mode 100644 index 0000000..8b09005 --- /dev/null +++ b/board/altera/socfpga/pinmux_config.c @@ -0,0 +1,214 @@ +/* This file is generated by Preloader Generator */ + +#include "pinmux_config.h" + +/* pin mux configuration data */ +unsigned long sys_mgr_init_table[CONFIG_HPS_PINMUX_NUM] = { + 0, /* EMACIO0 - Unused */ + 2, /* EMACIO1 - USB */ + 2, /* EMACIO2 - USB */ + 2, /* EMACIO3 - USB */ + 2, /* EMACIO4 - USB */ + 2, /* EMACIO5 - USB */ + 2, /* EMACIO6 - USB */ + 2, /* EMACIO7 - USB */ + 2, /* EMACIO8 - USB */ + 0, /* EMACIO9 - Unused */ + 2, /* EMACIO10 - USB */ + 2, /* EMACIO11 - USB */ + 2, /* EMACIO12 - USB */ + 2, /* EMACIO13 - USB */ + 0, /* EMACIO14 - N/A */ + 0, /* EMACIO15 - N/A */ + 0, /* EMACIO16 - N/A */ + 0, /* EMACIO17 - N/A */ + 0, /* EMACIO18 - N/A */ + 0, /* EMACIO19 - N/A */ + 3, /* FLASHIO0 - SDMMC */ + 3, /* FLASHIO1 - SDMMC */ + 3, /* FLASHIO2 - SDMMC */ + 3, /* FLASHIO3 - SDMMC */ + 0, /* FLASHIO4 - SDMMC */ + 0, /* FLASHIO5 - SDMMC */ + 0, /* FLASHIO6 - SDMMC */ + 0, /* FLASHIO7 - SDMMC */ + 0, /* FLASHIO8 - SDMMC */ + 3, /* FLASHIO9 - SDMMC */ + 3, /* FLASHIO10 - SDMMC */ + 3, /* FLASHIO11 - SDMMC */ + 3, /* GENERALIO0 - TRACE */ + 3, /* GENERALIO1 - TRACE */ + 3, /* GENERALIO2 - TRACE */ + 3, /* GENERALIO3 - TRACE */ + 3, /* GENERALIO4 - TRACE */ + 3, /* GENERALIO5 - TRACE */ + 3, /* GENERALIO6 - TRACE */ + 3, /* GENERALIO7 - TRACE */ + 3, /* GENERALIO8 - TRACE */ + 3, /* GENERALIO9 - SPIM0 */ + 3, /* GENERALIO10 - SPIM0 */ + 3, /* GENERALIO11 - SPIM0 */ + 3, /* GENERALIO12 - SPIM0 */ + 2, /* GENERALIO13 - CAN0 */ + 2, /* GENERALIO14 - CAN0 */ + 3, /* GENERALIO15 - I2C0 */ + 3, /* GENERALIO16 - I2C0 */ + 2, /* GENERALIO17 - UART0 */ + 2, /* GENERALIO18 - UART0 */ + 0, /* GENERALIO19 - N/A */ + 0, /* GENERALIO20 - N/A */ + 0, /* GENERALIO21 - N/A */ + 0, /* GENERALIO22 - N/A */ + 0, /* GENERALIO23 - N/A */ + 0, /* GENERALIO24 - N/A */ + 0, /* GENERALIO25 - N/A */ + 0, /* GENERALIO26 - N/A */ + 0, /* GENERALIO27 - N/A */ + 0, /* GENERALIO28 - N/A */ + 0, /* GENERALIO29 - N/A */ + 0, /* GENERALIO30 - N/A */ + 0, /* GENERALIO31 - N/A */ + 2, /* MIXED1IO0 - EMAC */ + 2, /* MIXED1IO1 - EMAC */ + 2, /* MIXED1IO2 - EMAC */ + 2, /* MIXED1IO3 - EMAC */ + 2, /* MIXED1IO4 - EMAC */ + 2, /* MIXED1IO5 - EMAC */ + 2, /* MIXED1IO6 - EMAC */ + 2, /* MIXED1IO7 - EMAC */ + 2, /* MIXED1IO8 - EMAC */ + 2, /* MIXED1IO9 - EMAC */ + 2, /* MIXED1IO10 - EMAC */ + 2, /* MIXED1IO11 - EMAC */ + 2, /* MIXED1IO12 - EMAC */ + 2, /* MIXED1IO13 - EMAC */ + 0, /* MIXED1IO14 - Unused */ + 3, /* MIXED1IO15 - QSPI */ + 3, /* MIXED1IO16 - QSPI */ + 3, /* MIXED1IO17 - QSPI */ + 3, /* MIXED1IO18 - QSPI */ + 3, /* MIXED1IO19 - QSPI */ + 3, /* MIXED1IO20 - QSPI */ + 0, /* MIXED1IO21 - GPIO */ + 0, /* MIXED2IO0 - N/A */ + 0, /* MIXED2IO1 - N/A */ + 0, /* MIXED2IO2 - N/A */ + 0, /* MIXED2IO3 - N/A */ + 0, /* MIXED2IO4 - N/A */ + 0, /* MIXED2IO5 - N/A */ + 0, /* MIXED2IO6 - N/A */ + 0, /* MIXED2IO7 - N/A */ + 0, /* GPLINMUX48 */ + 0, /* GPLINMUX49 */ + 0, /* GPLINMUX50 */ + 0, /* GPLINMUX51 */ + 0, /* GPLINMUX52 */ + 0, /* GPLINMUX53 */ + 0, /* GPLINMUX54 */ + 0, /* GPLINMUX55 */ + 0, /* GPLINMUX56 */ + 0, /* GPLINMUX57 */ + 0, /* GPLINMUX58 */ + 0, /* GPLINMUX59 */ + 0, /* GPLINMUX60 */ + 0, /* GPLINMUX61 */ + 0, /* GPLINMUX62 */ + 0, /* GPLINMUX63 */ + 0, /* GPLINMUX64 */ + 0, /* GPLINMUX65 */ + 0, /* GPLINMUX66 */ + 0, /* GPLINMUX67 */ + 0, /* GPLINMUX68 */ + 0, /* GPLINMUX69 */ + 0, /* GPLINMUX70 */ + 1, /* GPLMUX0 */ + 1, /* GPLMUX1 */ + 1, /* GPLMUX2 */ + 1, /* GPLMUX3 */ + 1, /* GPLMUX4 */ + 1, /* GPLMUX5 */ + 1, /* GPLMUX6 */ + 1, /* GPLMUX7 */ + 1, /* GPLMUX8 */ + 1, /* GPLMUX9 */ + 1, /* GPLMUX10 */ + 1, /* GPLMUX11 */ + 1, /* GPLMUX12 */ + 1, /* GPLMUX13 */ + 1, /* GPLMUX14 */ + 1, /* GPLMUX15 */ + 1, /* GPLMUX16 */ + 1, /* GPLMUX17 */ + 1, /* GPLMUX18 */ + 1, /* GPLMUX19 */ + 1, /* GPLMUX20 */ + 1, /* GPLMUX21 */ + 1, /* GPLMUX22 */ + 1, /* GPLMUX23 */ + 1, /* GPLMUX24 */ + 1, /* GPLMUX25 */ + 1, /* GPLMUX26 */ + 1, /* GPLMUX27 */ + 1, /* GPLMUX28 */ + 1, /* GPLMUX29 */ + 1, /* GPLMUX30 */ + 1, /* GPLMUX31 */ + 1, /* GPLMUX32 */ + 1, /* GPLMUX33 */ + 1, /* GPLMUX34 */ + 1, /* GPLMUX35 */ + 1, /* GPLMUX36 */ + 1, /* GPLMUX37 */ + 1, /* GPLMUX38 */ + 1, /* GPLMUX39 */ + 1, /* GPLMUX40 */ + 1, /* GPLMUX41 */ + 1, /* GPLMUX42 */ + 1, /* GPLMUX43 */ + 1, /* GPLMUX44 */ + 1, /* GPLMUX45 */ + 1, /* GPLMUX46 */ + 1, /* GPLMUX47 */ + 1, /* GPLMUX48 */ + 1, /* GPLMUX49 */ + 1, /* GPLMUX50 */ + 1, /* GPLMUX51 */ + 1, /* GPLMUX52 */ + 1, /* GPLMUX53 */ + 1, /* GPLMUX54 */ + 1, /* GPLMUX55 */ + 1, /* GPLMUX56 */ + 1, /* GPLMUX57 */ + 1, /* GPLMUX58 */ + 1, /* GPLMUX59 */ + 1, /* GPLMUX60 */ + 1, /* GPLMUX61 */ + 1, /* GPLMUX62 */ + 1, /* GPLMUX63 */ + 1, /* GPLMUX64 */ + 1, /* GPLMUX65 */ + 1, /* GPLMUX66 */ + 1, /* GPLMUX67 */ + 1, /* GPLMUX68 */ + 1, /* GPLMUX69 */ + 1, /* GPLMUX70 */ + 0, /* NANDUSEFPGA */ + 0, /* UART0USEFPGA */ + 0, /* RGMII1USEFPGA */ + 0, /* SPIS0USEFPGA */ + 0, /* CAN0USEFPGA */ + 0, /* I2C0USEFPGA */ + 0, /* SDMMCUSEFPGA */ + 0, /* QSPIUSEFPGA */ + 0, /* SPIS1USEFPGA */ + 0, /* RGMII0USEFPGA */ + 0, /* UART1USEFPGA */ + 0, /* CAN1USEFPGA */ + 0, /* USB1USEFPGA */ + 0, /* I2C3USEFPGA */ + 0, /* I2C2USEFPGA */ + 0, /* I2C1USEFPGA */ + 0, /* SPIM1USEFPGA */ + 0, /* USB0USEFPGA */ + 0 /* SPIM0USEFPGA */ +}; diff --git a/board/altera/socfpga/pinmux_config.h b/board/altera/socfpga/pinmux_config.h new file mode 100644 index 0000000..f278f2b --- /dev/null +++ b/board/altera/socfpga/pinmux_config.h @@ -0,0 +1,54 @@ +/* This file is generated by Preloader Generator */ + +#ifndef _PRELOADER_PINMUX_CONFIG_H_ +#define _PRELOADER_PINMUX_CONFIG_H_ + +/* + * State of enabling for which IP connected out through the muxing. + * Value 1 mean the IP connection is muxed out + */ +#define CONFIG_HPS_EMAC0 (0) +#define CONFIG_HPS_EMAC1 (1) +#define CONFIG_HPS_USB0 (0) +#define CONFIG_HPS_USB1 (1) +#define CONFIG_HPS_NAND (0) +#define CONFIG_HPS_SDMMC (1) +#define CONFIG_HPS_QSPI (1) +#define CONFIG_HPS_UART0 (1) +#define CONFIG_HPS_UART1 (0) +#define CONFIG_HPS_TRACE (1) +#define CONFIG_HPS_I2C0 (1) +#define CONFIG_HPS_I2C1 (0) +#define CONFIG_HPS_I2C2 (0) +#define CONFIG_HPS_I2C3 (0) +#define CONFIG_HPS_SPIM0 (1) +#define CONFIG_HPS_SPIM1 (0) +#define CONFIG_HPS_SPIS0 (0) +#define CONFIG_HPS_SPIS1 (0) +#define CONFIG_HPS_CAN0 (1) +#define CONFIG_HPS_CAN1 (0) + +/* IP attribute value (which affected by pin muxing configuration) */ +#define CONFIG_HPS_SDMMC_BUSWIDTH (4) + +/* 1 if the pins are connected out */ +#define CONFIG_HPS_QSPI_CS0 (1) +#define CONFIG_HPS_QSPI_CS1 (0) +#define CONFIG_HPS_QSPI_CS2 (0) +#define CONFIG_HPS_QSPI_CS3 (0) + +/* UART */ +/* 1 means the pin is mux out or available */ +#define CONFIG_HPS_UART0_TX (1) +#define CONFIG_HPS_UART0_RX (1) +#define CONFIG_HPS_UART0_CTS (0) +#define CONFIG_HPS_UART0_RTS (0) +#define CONFIG_HPS_UART1_TX (0) +#define CONFIG_HPS_UART1_RX (0) +#define CONFIG_HPS_UART1_CTS (0) +#define CONFIG_HPS_UART1_RTS (0) + +/* Pin mux data */ +#define CONFIG_HPS_PINMUX_NUM (207) + +#endif /* _PRELOADER_PINMUX_CONFIG_H_ */ diff --git a/board/isee/igep0033/board.c b/board/isee/igep0033/board.c index 9e91f68..347c128 100644 --- a/board/isee/igep0033/board.c +++ b/board/isee/igep0033/board.c @@ -64,7 +64,7 @@ static struct emif_regs ddr3_emif_reg_data = { #define OSC (V_OSCK/1000000) const struct dpll_params dpll_ddr = { - 303, OSC-1, 1, -1, -1, -1, -1}; + 400, OSC-1, 1, -1, -1, -1, -1}; const struct dpll_params *get_dpll_ddr_params(void) { @@ -83,7 +83,7 @@ void set_mux_conf_regs(void) void sdram_init(void) { - config_ddr(303, K4B2G1646EBIH9_IOCTRL_VALUE, &ddr3_data, + config_ddr(400, K4B2G1646EBIH9_IOCTRL_VALUE, &ddr3_data, &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); } #endif @@ -129,6 +129,7 @@ static struct cpsw_platform_data cpsw_data = { .ale_entries = 1024, .host_port_reg_ofs = 0x108, .hw_stats_reg_ofs = 0x900, + .bd_ram_ofs = 0x2000, .mac_control = (1 << 5), .control = cpsw_control, .host_port_num = 0, diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c index e40b0bd..dafb1eb 100644 --- a/board/phytec/pcm051/board.c +++ b/board/phytec/pcm051/board.c @@ -150,6 +150,7 @@ static struct cpsw_platform_data cpsw_data = { .ale_entries = 1024, .host_port_reg_ofs = 0x108, .hw_stats_reg_ofs = 0x900, + .bd_ram_ofs = 0x2000, .mac_control = (1 << 5), .control = cpsw_control, .host_port_num = 0, diff --git a/board/ti/omap1510inn/Makefile b/board/ti/omap1510inn/Makefile deleted file mode 100644 index ad5a7eb..0000000 --- a/board/ti/omap1510inn/Makefile +++ /dev/null @@ -1,29 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -include $(TOPDIR)/config.mk - -LIB = $(obj)lib$(BOARD).o - -COBJS := omap1510innovator.o -SOBJS := lowlevel_init.o - -SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) -OBJS := $(addprefix $(obj),$(COBJS)) -SOBJS := $(addprefix $(obj),$(SOBJS)) - -$(LIB): $(obj).depend $(OBJS) $(SOBJS) - $(call cmd_link_o_target, $(OBJS) $(SOBJS)) - -######################################################################### - -# defines $(obj).depend target -include $(SRCTREE)/rules.mk - -sinclude $(obj).depend - -######################################################################### diff --git a/board/ti/omap1510inn/config.mk b/board/ti/omap1510inn/config.mk deleted file mode 100644 index 67fe0bd..0000000 --- a/board/ti/omap1510inn/config.mk +++ /dev/null @@ -1,25 +0,0 @@ -# -# (C) Copyright 2002 -# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de> -# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> -# -# (C) Copyright 2003 -# Texas Instruments, <www.ti.com> -# Kshitij Gupta <Kshitij@ti.com> -# -# TI Innovator board with OMAP1510 (ARM925T) cpu -# see http://www.ti.com/ for more information on Texas Insturments -# -# Innovator has 1 bank of 256 MB SDRAM -# Physical Address: -# 1000'0000 to 2000'0000 -# -# -# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000 (mem base + reserved) -# -# we load ourself to 1108'0000 -# -# - - -CONFIG_SYS_TEXT_BASE = 0x11080000 diff --git a/board/ti/omap1510inn/lowlevel_init.S b/board/ti/omap1510inn/lowlevel_init.S deleted file mode 100644 index 4d3ec39..0000000 --- a/board/ti/omap1510inn/lowlevel_init.S +++ /dev/null @@ -1,380 +0,0 @@ -/* - * Board specific setup info - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * - * -- Some bits of code used from rrload's head_OMAP1510.s -- - * Copyright (C) 2002 RidgeRun, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <version.h> - -#if defined(CONFIG_OMAP1510) -#include <./configs/omap1510.h> -#endif - -#define OMAP1510_CLKS ((1<<EN_XORPCK)|(1<<EN_PERCK)|(1<<EN_TIMCK)|(1<<EN_GPIOCK)) - - -_TEXT_BASE: - .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */ - -.globl lowlevel_init -lowlevel_init: - - /* - * Configure 1510 pins functions to match our board. - */ - ldr r0, REG_PULL_DWN_CTRL_0 - ldr r1, VAL_PULL_DWN_CTRL_0 - str r1, [r0] - ldr r0, REG_PULL_DWN_CTRL_1 - ldr r1, VAL_PULL_DWN_CTRL_1 - str r1, [r0] - ldr r0, REG_PULL_DWN_CTRL_2 - ldr r1, VAL_PULL_DWN_CTRL_2 - str r1, [r0] - ldr r0, REG_PULL_DWN_CTRL_3 - ldr r1, VAL_PULL_DWN_CTRL_3 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_4 - ldr r1, VAL_FUNC_MUX_CTRL_4 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_5 - ldr r1, VAL_FUNC_MUX_CTRL_5 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_6 - ldr r1, VAL_FUNC_MUX_CTRL_6 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_7 - ldr r1, VAL_FUNC_MUX_CTRL_7 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_8 - ldr r1, VAL_FUNC_MUX_CTRL_8 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_9 - ldr r1, VAL_FUNC_MUX_CTRL_9 - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_A - ldr r1, VAL_FUNC_MUX_CTRL_A - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_B - ldr r1, VAL_FUNC_MUX_CTRL_B - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_C - ldr r1, VAL_FUNC_MUX_CTRL_C - str r1, [r0] - ldr r0, REG_FUNC_MUX_CTRL_D - ldr r1, VAL_FUNC_MUX_CTRL_D - str r1, [r0] - ldr r0, REG_VOLTAGE_CTRL_0 - ldr r1, VAL_VOLTAGE_CTRL_0 - str r1, [r0] - ldr r0, REG_TEST_DBG_CTRL_0 - ldr r1, VAL_TEST_DBG_CTRL_0 - str r1, [r0] - ldr r0, REG_MOD_CONF_CTRL_0 - ldr r1, VAL_MOD_CONF_CTRL_0 - str r1, [r0] - - /* Move to 1510 mode */ - ldr r0, REG_COMP_MODE_CTRL_0 - ldr r1, VAL_COMP_MODE_CTRL_0 - str r1, [r0] - - /* Set up Traffic Ctlr*/ - ldr r0, REG_TC_IMIF_PRIO - mov r1, #0x0 - str r1, [r0] - ldr r0, REG_TC_EMIFS_PRIO - str r1, [r0] - ldr r0, REG_TC_EMIFF_PRIO - str r1, [r0] - - ldr r0, REG_TC_EMIFS_CONFIG - ldr r1, [r0] - bic r1, r1, #0x08 /* clear the global power-down enable PDE bit */ - bic r1, r1, #0x01 /* write protect flash by clearing the WP bit */ - str r1, [r0] /* EMIFS GlB Configuration. (value 0x12 most likely) */ - - /* Setup some clock domains */ - ldr r1, =OMAP1510_CLKS - ldr r0, REG_ARM_IDLECT2 - strh r1, [r0] /* CLKM, Clock domain control. */ - - mov r1, #0x01 /* PER_EN bit */ - ldr r0, REG_ARM_RSTCT2 - strh r1, [r0] /* CLKM; Peripheral reset. */ - - /* Set CLKM to Sync-Scalable */ - /* I supposidly need to enable the dsp clock before switching */ - mov r1, #0x1000 - ldr r0, REG_ARM_SYSST - strh r1, [r0] - mov r0, #0x400 -1: - subs r0, r0, #0x1 /* wait for any bubbles to finish */ - bne 1b - - ldr r1, VAL_ARM_CKCTL /* use 12Mhz ref, PER must be <= 50Mhz so /2 */ - ldr r0, REG_ARM_CKCTL - strh r1, [r0] - - /* setup DPLL 1 */ - ldr r1, VAL_DPLL1_CTL - ldr r0, REG_DPLL1_CTL - strh r1, [r0] - ands r1, r1, #0x10 /* Check if PLL is enabled. */ - beq lock_end /* Do not look for lock if BYPASS selected */ -2: - ldrh r1, [r0] - ands r1, r1, #0x01 /* Check the LOCK bit. */ - beq 2b /* ...loop until bit goes hi. */ -lock_end: - - /* Set memory timings corresponding to the new clock speed */ - - /* Check execution location to determine current execution location - * and branch to appropriate initialization code. - */ - mov r0, #0x10000000 /* Load physical SDRAM base. */ - mov r1, pc /* Get current execution location. */ - /* Zero all but top 6 bits of PC, as they alone detect whether an - * address is in the range 0x1000:0000-0x13ff:ffff, the 64M sized - * valid range for SDRAM on the OMAP 1510/5910. - */ - and r1, r1, #0xfc000000 - cmp r1, r0 /* Compare. */ - beq skip_sdram /* Skip over EMIF-fast initialization - * if running from SDRAM. - */ - - /* - * Delay for SDRAM initialization. - */ - mov r3, #0x1800 /* value should be checked */ -3: - subs r3, r3, #0x1 /* Decrement count */ - bne 3b - - /* - * Set SDRAM control values. Disable refresh before MRS command. - */ - ldr r0, VAL_TC_EMIFF_SDRAM_CONFIG /* get good value */ - bic r3, r0, #0xC /* (BIT3|BIT2) ulConfig with auto-refresh disabled. */ - orr r3, r3, #0x8000000 /* (BIT27) Disable CLK when Power down or Self-Refresh */ - orr r3, r3, #0x4000000 /* BIT26 Power Down Enable */ - ldr r2, REG_TC_EMIFF_SDRAM_CONFIG /* Point to configuration register. */ - str r3, [r2] /* Store the passed value with AR disabled. */ - - ldr r1, VAL_TC_EMIFF_MRS /* get MRS value */ - ldr r2, REG_TC_EMIFF_MRS /* Point to MRS register. */ - str r1, [r2] /* Store the passed value.*/ - - ldr r2, REG_TC_EMIFF_SDRAM_CONFIG /* Point to configuration register. */ - str r0, [r2] /* Store the passed value. */ - - /* - * Delay for SDRAM initialization. - */ - mov r3, #0x1800 -4: - subs r3, r3, #1 /* Decrement count. */ - bne 4b - -skip_sdram: - - /* slow interface */ - ldr r1, VAL_TC_EMIFS_CS0_CONFIG - ldr r0, REG_TC_EMIFS_CS0_CONFIG - str r1, [r0] /* Chip Select 0 */ - ldr r1, VAL_TC_EMIFS_CS1_CONFIG - ldr r0, REG_TC_EMIFS_CS1_CONFIG - str r1, [r0] /* Chip Select 1 */ - ldr r1, VAL_TC_EMIFS_CS2_CONFIG - ldr r0, REG_TC_EMIFS_CS2_CONFIG - str r1, [r0] /* Chip Select 2 */ - ldr r1, VAL_TC_EMIFS_CS3_CONFIG - ldr r0, REG_TC_EMIFS_CS3_CONFIG - str r1, [r0] /* Chip Select 3 */ - - /* Next, Enable the RS232 Line Drivers in the FPGA. */ - /* Also, power on the audio CODEC's amplifier here, */ - /* which will make a noise on the audio output. */ - /* This is done here instead of in the kernel so there */ - /* isn't a loud popping noise at the start of each */ - /* song. */ - /* Also, disable the CODEC's clocks. */ - /* omap1510-HelenP1 [specific] */ - - ldr r0, REG_FPGA_POWER - mov r1, #0 - ldr r2, REG_FPGA_DIP_SWITCH - ldrb r3, [r2] - cmp r3, #0x8 - movne r1, #0x62 /* Enable the RS232 Line Drivers in the EPLD */ - strb r1, [r0] - ldr r0, REG_FPGA_AUDIO - mov r1, #0x0 /* Disable sound driver (CODEC clocks) */ - strb r1, [r0] - - /* back to arch calling code */ - mov pc, lr - -/* the literal pools origin */ - .ltorg - -/* OMAP configuration registers */ -REG_FUNC_MUX_CTRL_0: /* 32 bits */ - .word 0xfffe1000 -REG_FUNC_MUX_CTRL_1: /* 32 bits */ - .word 0xfffe1004 -REG_FUNC_MUX_CTRL_2: /* 32 bits */ - .word 0xfffe1008 -REG_COMP_MODE_CTRL_0: /* 32 bits */ - .word 0xfffe100c -REG_FUNC_MUX_CTRL_3: /* 32 bits */ - .word 0xfffe1010 -REG_FUNC_MUX_CTRL_4: /* 32 bits */ - .word 0xfffe1014 -REG_FUNC_MUX_CTRL_5: /* 32 bits */ - .word 0xfffe1018 -REG_FUNC_MUX_CTRL_6: /* 32 bits */ - .word 0xfffe101c -REG_FUNC_MUX_CTRL_7: /* 32 bits */ - .word 0xfffe1020 -REG_FUNC_MUX_CTRL_8: /* 32 bits */ - .word 0xfffe1024 -REG_FUNC_MUX_CTRL_9: /* 32 bits */ - .word 0xfffe1028 -REG_FUNC_MUX_CTRL_A: /* 32 bits */ - .word 0xfffe102C -REG_FUNC_MUX_CTRL_B: /* 32 bits */ - .word 0xfffe1030 -REG_FUNC_MUX_CTRL_C: /* 32 bits */ - .word 0xfffe1034 -REG_FUNC_MUX_CTRL_D: /* 32 bits */ - .word 0xfffe1038 -REG_PULL_DWN_CTRL_0: /* 32 bits */ - .word 0xfffe1040 -REG_PULL_DWN_CTRL_1: /* 32 bits */ - .word 0xfffe1044 -REG_PULL_DWN_CTRL_2: /* 32 bits */ - .word 0xfffe1048 -REG_PULL_DWN_CTRL_3: /* 32 bits */ - .word 0xfffe104c -REG_VOLTAGE_CTRL_0: /* 32 bits */ - .word 0xfffe1060 -REG_TEST_DBG_CTRL_0: /* 32 bits */ - .word 0xfffe1070 -REG_MOD_CONF_CTRL_0: /* 32 bits */ - .word 0xfffe1080 -REG_TC_IMIF_PRIO: /* 32 bits */ - .word 0xfffecc00 -REG_TC_EMIFS_PRIO: /* 32 bits */ - .word 0xfffecc04 -REG_TC_EMIFF_PRIO: /* 32 bits */ - .word 0xfffecc08 -REG_TC_EMIFS_CONFIG: /* 32 bits */ - .word 0xfffecc0c -REG_TC_EMIFS_CS0_CONFIG: /* 32 bits */ - .word 0xfffecc10 -REG_TC_EMIFS_CS1_CONFIG: /* 32 bits */ - .word 0xfffecc14 -REG_TC_EMIFS_CS2_CONFIG: /* 32 bits */ - .word 0xfffecc18 -REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */ - .word 0xfffecc1c -REG_TC_EMIFF_SDRAM_CONFIG: /* 32 bits */ - .word 0xfffecc20 -REG_TC_EMIFF_MRS: /* 32 bits */ - .word 0xfffecc24 -/* MPU clock/reset/power mode control registers */ -REG_ARM_CKCTL: /* 16 bits */ - .word 0xfffece00 -REG_ARM_IDLECT2: /* 16 bits */ - .word 0xfffece08 -REG_ARM_RSTCT2: /* 16 bits */ - .word 0xfffece14 -REG_ARM_SYSST: /* 16 bits */ - .word 0xfffece18 -/* DPLL control registers */ -REG_DPLL1_CTL: /* 16 bits */ - .word 0xfffecf00 -/* identification code register */ -REG_IDCODE: /* 32 bits */ - .word 0xfffed404 - -/* Innovator specific */ -REG_FPGA_LED_DIGIT: /* 8 bits (not used on Innovator) */ - .word 0x08000003 -REG_FPGA_POWER: /* 8 bits */ - .word 0x08000005 -REG_FPGA_AUDIO: /* 8 bits (not used on Innovator) */ - .word 0x0800000c -REG_FPGA_DIP_SWITCH: /* 8 bits (not used on Innovator) */ - .word 0x0800000e - -VAL_COMP_MODE_CTRL_0: - .word 0x0000eaef -VAL_FUNC_MUX_CTRL_4: - .word 0x00000000 -VAL_FUNC_MUX_CTRL_5: - .word 0x00000000 -VAL_FUNC_MUX_CTRL_6: - .word 0x00000001 -VAL_FUNC_MUX_CTRL_7: - .word 0x00000000 -VAL_FUNC_MUX_CTRL_8: - .word 0x10001200 -VAL_FUNC_MUX_CTRL_9: - .word 0x01201012 -VAL_FUNC_MUX_CTRL_A: - .word 0x00000248 -VAL_FUNC_MUX_CTRL_B: - .word 0x00000248 -VAL_FUNC_MUX_CTRL_C: - .word 0x09000000 -VAL_FUNC_MUX_CTRL_D: - .word 0x00000000 -VAL_PULL_DWN_CTRL_0: - .word 0x11a10000 -VAL_PULL_DWN_CTRL_1: - .word 0x2e047fff -VAL_PULL_DWN_CTRL_2: - .word 0xffd603a6 -VAL_PULL_DWN_CTRL_3: - .word 0x00003e03 -VAL_VOLTAGE_CTRL_0: - .word 0x00000007 -VAL_TEST_DBG_CTRL_0: - /* See Errata 4.13, This works around a SRAM bug, for chips below ES2.5 . - * This slows down internal SRAM accesses. - */ - .word 0x00000007 -VAL_MOD_CONF_CTRL_0: - .word 0x0b000008 -VAL_ARM_CKCTL: - .word 0x010f -VAL_DPLL1_CTL: - .word 0x2710 -VAL_TC_EMIFS_CS1_CONFIG_PRELIM: - .word 0x00001149 -VAL_TC_EMIFS_CS2_CONFIG_PRELIM: - .word 0x00004158 -VAL_TC_EMIFS_CS0_CONFIG: - .word 0x002130b0 -VAL_TC_EMIFS_CS1_CONFIG: - .word 0x0000f559 -VAL_TC_EMIFS_CS2_CONFIG: - .word 0x000055f0 -VAL_TC_EMIFS_CS3_CONFIG: - .word 0x00003331 -VAL_TC_EMIFF_SDRAM_CONFIG: - .word 0x010290fc -VAL_TC_EMIFF_MRS: - .word 0x00000027 diff --git a/board/ti/omap1510inn/omap1510innovator.c b/board/ti/omap1510inn/omap1510innovator.c deleted file mode 100644 index a2a33a0..0000000 --- a/board/ti/omap1510inn/omap1510innovator.c +++ /dev/null @@ -1,125 +0,0 @@ -/* - * (C) Copyright 2002 - * Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Marius Groeger <mgroeger@sysgo.de> - * - * (C) Copyright 2002 - * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch> - * - * (C) Copyright 2003 - * Texas Instruments, <www.ti.com> - * Kshitij Gupta <Kshitij@ti.com> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <netdev.h> - -DECLARE_GLOBAL_DATA_PTR; - -static void flash__init (void); -static void ether__init (void); - -static inline void delay (unsigned long loops) -{ - __asm__ volatile ("1:\n" - "subs %0, %1, #1\n" - "bne 1b":"=r" (loops):"0" (loops)); -} - -/* - * Miscellaneous platform dependent initialisations - */ - -int board_init (void) -{ - /* arch number of OMAP 1510-Board */ - gd->bd->bi_arch_number = MACH_TYPE_OMAP_INNOVATOR; - - /* adress of boot parameters */ - gd->bd->bi_boot_params = 0x10000100; - -/* kk - this speeds up your boot a quite a bit. However to make it - * work, you need make sure your kernel startup flush bug is fixed. - * ... rkw ... - */ - icache_enable (); - - flash__init (); - ether__init (); - return 0; -} - - -int misc_init_r (void) -{ - /* volatile ushort *gdir = (ushort *) (GPIO_DIR_CONTROL_REG); */ - /* volatile ushort *mdir = (ushort *) (MPUIO_DIR_CONTROL_REG); */ - - /* setup gpio direction to match board (no floats!) */ - /**gdir = 0xCFF9; */ - /**mdir = 0x103F; */ - - return (0); -} - -/****************************** - Routine: - Description: -******************************/ -static void flash__init (void) -{ -#define CS0_CHIP_SELECT_REG 0xfffecc10 -#define CS3_CHIP_SELECT_REG 0xfffecc1c -#define EMIFS_GlB_Config_REG 0xfffecc0c - - { - unsigned int regval; - - regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG); - regval = regval | 0x0001; /* Turn off write protection for flash devices. */ - if (regval & 0x0002) { - regval = regval & 0xfffd; /* Swap CS0 and CS3 so that flash is visible at 0x0 and eeprom at 0x0c000000. */ - /* If, instead, you want to reference flash at 0x0c000000, then it seemed the following were necessary. */ - /* *((volatile unsigned int *)CS0_CHIP_SELECT_REG) = 0x202090; / * Overrides head.S setting of 0x212090 */ - /* *((volatile unsigned int *)CS3_CHIP_SELECT_REG) = 0x202090; / * Let's flash chips be fully functional. */ - } - *((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval; - } -} - - -/****************************** - Routine: - Description: -******************************/ -static void ether__init (void) -{ -#define ETH_CONTROL_REG 0x0800000b - /* take the Ethernet controller out of reset and wait - * for the EEPROM load to complete. - */ - *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01; - udelay (3); -} - - -int dram_init (void) -{ - gd->bd->bi_dram[0].start = PHYS_SDRAM_1; - gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; - - return 0; -} - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - int rc = 0; -#ifdef CONFIG_LAN91C96 - rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); -#endif - return rc; -} -#endif |