2 files changed, 21 insertions, 48 deletions

diff --git a/board/freescale/p1022ds/spl.c b/board/freescale/p1022ds/spl.c
index 7e89de2..358b2e3 100644
--- a/board/freescale/p1022ds/spl.c
+++ b/board/freescale/p1022ds/spl.c
@@ -100,21 +100,37 @@ void board_init_r(gd_t *gd, ulong dest_addr)
 	get_clocks();
 	mem_malloc_init(CONFIG_SPL_RELOC_MALLOC_ADDR,
 			CONFIG_SPL_RELOC_MALLOC_SIZE);
+#ifndef CONFIG_SPL_NAND_BOOT
 	env_init();
+#endif
 #ifdef CONFIG_SPL_MMC_BOOT
 	mmc_initialize(bd);
 #endif
 	/* relocate environment function pointers etc. */
+#ifdef CONFIG_SPL_NAND_BOOT
+	nand_spl_load_image(CONFIG_ENV_OFFSET, CONFIG_ENV_SIZE,
+			    (uchar *)CONFIG_ENV_ADDR);
+
+	gd->env_addr  = (ulong)(CONFIG_ENV_ADDR);
+	gd->env_valid = 1;
+#else
 	env_relocate();
+#endif
 
 	i2c_init(CONFIG_SYS_FSL_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
 
 	gd->ram_size = initdram(0);
+#ifdef CONFIG_SPL_NAND_BOOT
+	puts("Tertiary program loader running in sram...");
+#else
 	puts("Second program loader running in sram...\n");
+#endif
 
 #ifdef CONFIG_SPL_MMC_BOOT
 	mmc_boot();
 #elif defined(CONFIG_SPL_SPI_BOOT)
 	spi_boot();
+#elif defined(CONFIG_SPL_NAND_BOOT)
+	nand_boot();
 #endif
 }
diff --git a/board/freescale/p1022ds/spl_minimal.c b/board/freescale/p1022ds/spl_minimal.c
index d150d95..8b34396 100644
--- a/board/freescale/p1022ds/spl_minimal.c
+++ b/board/freescale/p1022ds/spl_minimal.c
@@ -12,51 +12,6 @@
 #include <asm/fsl_ddr_sdram.h>
 
 
-/*
- * Fixed sdram init -- doesn't use serial presence detect.
- */
-void sdram_init(void)
-{
-	volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
-
-	__raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
-	__raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
-#if CONFIG_CHIP_SELECTS_PER_CTRL > 1
-	__raw_writel(CONFIG_SYS_DDR_CS1_BNDS, &ddr->cs1_bnds);
-	__raw_writel(CONFIG_SYS_DDR_CS1_CONFIG, &ddr->cs1_config);
-#endif
-	__raw_writel(CONFIG_SYS_DDR_TIMING_3, &ddr->timing_cfg_3);
-	__raw_writel(CONFIG_SYS_DDR_TIMING_0, &ddr->timing_cfg_0);
-	__raw_writel(CONFIG_SYS_DDR_TIMING_1, &ddr->timing_cfg_1);
-	__raw_writel(CONFIG_SYS_DDR_TIMING_2, &ddr->timing_cfg_2);
-
-	__raw_writel(CONFIG_SYS_DDR_CONTROL_2, &ddr->sdram_cfg_2);
-	__raw_writel(CONFIG_SYS_DDR_MODE_1, &ddr->sdram_mode);
-	__raw_writel(CONFIG_SYS_DDR_MODE_2, &ddr->sdram_mode_2);
-
-	__raw_writel(CONFIG_SYS_DDR_INTERVAL, &ddr->sdram_interval);
-	__raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
-	__raw_writel(CONFIG_SYS_DDR_CLK_CTRL, &ddr->sdram_clk_cntl);
-
-	__raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4);
-	__raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5);
-	__raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
-	__raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL, &ddr->ddr_wrlvl_cntl);
-
-	/* Set, but do not enable the memory */
-	__raw_writel(CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN,
-			&ddr->sdram_cfg);
-
-	in_be32(&ddr->sdram_cfg);
-	udelay(500);
-
-	/* Let the controller go */
-	out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN);
-	in_be32(&ddr->sdram_cfg);
-
-	set_next_law(0, CONFIG_SYS_SDRAM_SIZE_LAW, LAW_TRGT_IF_DDR_1);
-}
-
 const static u32 sysclk_tbl[] = {
 	66666000, 7499900, 83332500, 8999900,
 	99999000, 11111000, 12499800, 13333200
@@ -68,6 +23,10 @@ void board_init_f(ulong bootflag)
 	u32 plat_ratio, sys_clk, bus_clk;
 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
 
+#if defined(CONFIG_SYS_NAND_BR_PRELIM) && defined(CONFIG_SYS_NAND_OR_PRELIM)
+	set_lbc_br(0, CONFIG_SYS_NAND_BR_PRELIM);
+	set_lbc_or(0, CONFIG_SYS_NAND_OR_PRELIM);
+#endif
 	/* for FPGA */
 	set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
 	set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
@@ -83,9 +42,6 @@ void board_init_f(ulong bootflag)
 
 	puts("\nNAND boot... ");
 
-	/* Initialize the DDR3 */
-	sdram_init();
-
 	/* copy code to RAM and jump to it - this should not return */
 	/* NOTE - code has to be copied out of NAND buffer before
 	 * other blocks can be read.
@@ -96,6 +52,7 @@ void board_init_f(ulong bootflag)
 
 void board_init_r(gd_t *gd, ulong dest_addr)
 {
+	puts("\nSecond program loader running in sram...");
 	nand_boot();
 }