diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/ti/omap2420h4/config.mk | 4 | ||||
| -rw-r--r-- | board/ti/omap2420h4/mem.c | 13 |
2 files changed, 2 insertions, 15 deletions
diff --git a/board/ti/omap2420h4/config.mk b/board/ti/omap2420h4/config.mk index ca5ebdf..e5dff69 100644 --- a/board/ti/omap2420h4/config.mk +++ b/board/ti/omap2420h4/config.mk @@ -14,7 +14,7 @@ # (mem base + reserved) # For use with external or internal boots. -CONFIG_SYS_TEXT_BASE = 0x80e80000 +#CONFIG_SYS_TEXT_BASE = 0x80e80000 # Used with full SRAM boot. # This is either with a GP system or a signed boot image. @@ -24,5 +24,5 @@ CONFIG_SYS_TEXT_BASE = 0x80e80000 # Handy to get symbols to debug ROM version. #CONFIG_SYS_TEXT_BASE = 0x0 -#CONFIG_SYS_TEXT_BASE = 0x08000000 +CONFIG_SYS_TEXT_BASE = 0x08000000 #CONFIG_SYS_TEXT_BASE = 0x04000000 diff --git a/board/ti/omap2420h4/mem.c b/board/ti/omap2420h4/mem.c index c8b4186..ba3f12a 100644 --- a/board/ti/omap2420h4/mem.c +++ b/board/ti/omap2420h4/mem.c @@ -200,19 +200,6 @@ void do_sdrc_init(u32 offset, u32 early) __asm__ __volatile__("": : :"memory"); /* limit compiler scope */ - /* u-boot is compiled to run in DDR or SRAM at 8xxxxxxx or 4xxxxxxx. - * If we are running in flash prior to relocation and we use data - * here which is not pc relative we need to get the address correct. - * We need to find the current flash mapping to dress up the initial - * pointer load. As long as this is const data we should be ok. - */ - if((early) && running_in_flash()){ - sdata = (sdrc_data_t *)(((u32)sdata & 0x0003FFFF) | get_gpmc0_base()); - /* NOR internal boot offset is 0x4000 from xloader signature */ - if(running_from_internal_boot()) - sdata = (sdrc_data_t *)((u32)sdata + 0x4000); - } - if (!early && (((mtype = get_mem_type()) == DDR_COMBO)||(mtype == DDR_STACKED))) { if(mtype == DDR_COMBO){ pmask = BIT2;/* combo part has a shared CKE signal, can't use feature */ |