diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/AndesTech/adp-ag101p/Makefile | 44 | ||||
| -rw-r--r-- | board/AndesTech/adp-ag101p/adp-ag101p.c | 89 | ||||
| -rw-r--r-- | board/freescale/common/cds_pci_ft.c | 3 | ||||
| -rw-r--r-- | board/freescale/common/ics307_clk.c | 69 | ||||
| -rw-r--r-- | board/freescale/common/ics307_clk.h | 4 | ||||
| -rw-r--r-- | board/freescale/common/ngpixis.c | 27 | ||||
| -rw-r--r-- | board/freescale/common/pixis.c | 4 | ||||
| -rw-r--r-- | board/freescale/corenet_ds/eth_hydra.c | 8 | ||||
| -rw-r--r-- | board/freescale/corenet_ds/eth_p4080.c | 8 | ||||
| -rw-r--r-- | board/freescale/mpc8548cds/mpc8548cds.c | 69 | ||||
| -rw-r--r-- | board/freescale/mpc8568mds/mpc8568mds.c | 3 | ||||
| -rw-r--r-- | board/freescale/mpc8569mds/mpc8569mds.c | 2 | ||||
| -rw-r--r-- | board/freescale/mpc8572ds/tlb.c | 2 | ||||
| -rw-r--r-- | board/freescale/p1010rdb/p1010rdb.c | 2 | ||||
| -rw-r--r-- | board/freescale/p1_p2_rdb/p1_p2_rdb.c | 2 | ||||
| -rw-r--r-- | board/freescale/p1_p2_rdb_pc/law.c | 10 | ||||
| -rw-r--r-- | board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c | 3 | ||||
| -rw-r--r-- | board/freescale/p2041rdb/eth.c | 8 | ||||
| -rw-r--r-- | board/sbc8548/sbc8548.c | 2 | ||||
| -rw-r--r-- | board/sbc8560/sbc8560.c | 3 |
20 files changed, 309 insertions, 53 deletions
diff --git a/board/AndesTech/adp-ag101p/Makefile b/board/AndesTech/adp-ag101p/Makefile new file mode 100644 index 0000000..03c3ff4 --- /dev/null +++ b/board/AndesTech/adp-ag101p/Makefile @@ -0,0 +1,44 @@ +# +# Copyright (C) 2011 Andes Technology Corporation +# Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> +# Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := adp-ag101p.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS) $(SOBJS)) + +$(LIB): $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/AndesTech/adp-ag101p/adp-ag101p.c b/board/AndesTech/adp-ag101p/adp-ag101p.c new file mode 100644 index 0000000..8dd2043 --- /dev/null +++ b/board/AndesTech/adp-ag101p/adp-ag101p.c @@ -0,0 +1,89 @@ +/* + * Copyright (C) 2011 Andes Technology Corporation + * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> + * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <common.h> +#include <netdev.h> +#include <asm/io.h> + +#include <faraday/ftsdc010.h> +#include <faraday/ftsmc020.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Miscellaneous platform dependent initializations + */ + +int board_init(void) +{ + /* + * refer to BOOT_PARAMETER_PA_BASE within + * "linux/arch/nds32/include/asm/misc_spec.h" + */ + gd->bd->bi_arch_number = MACH_TYPE_ADPAG101P; + gd->bd->bi_boot_params = PHYS_SDRAM_0 + 0x400; + + ftsmc020_init(); /* initialize Flash */ + return 0; +} + +int dram_init(void) +{ + unsigned long sdram_base = PHYS_SDRAM_0; + unsigned long expected_size = PHYS_SDRAM_0_SIZE; + unsigned long actual_size; + + actual_size = get_ram_size((void *)sdram_base, expected_size); + + gd->ram_size = actual_size; + + if (expected_size != actual_size) { + printf("Warning: Only %lu of %lu MiB SDRAM is working\n", + actual_size >> 20, expected_size >> 20); + } + + return 0; +} + +int board_eth_init(bd_t *bd) +{ + return ftmac100_initialize(bd); +} + +ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info) +{ + if (banknum == 0) { /* non-CFI boot flash */ + info->portwidth = FLASH_CFI_8BIT; + info->chipwidth = FLASH_CFI_BY8; + info->interface = FLASH_CFI_X8; + return 1; + } else { + return 0; + } +} + +int board_mmc_init(bd_t *bis) +{ + ftsdc010_mmc_init(0); + return 0; +} diff --git a/board/freescale/common/cds_pci_ft.c b/board/freescale/common/cds_pci_ft.c index 6f221af..8a09f99 100644 --- a/board/freescale/common/cds_pci_ft.c +++ b/board/freescale/common/cds_pci_ft.c @@ -28,13 +28,12 @@ #if defined(CONFIG_OF_BOARD_SETUP) static void cds_pci_fixup(void *blob) { - int node, tmp[2]; + int node; const char *path; int len, slot, i; u32 *map = NULL; node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; if (node >= 0) { path = fdt_getprop(blob, node, "pci0", NULL); if (path) { diff --git a/board/freescale/common/ics307_clk.c b/board/freescale/common/ics307_clk.c index 89d8810..6acbc36 100644 --- a/board/freescale/common/ics307_clk.c +++ b/board/freescale/common/ics307_clk.c @@ -31,12 +31,81 @@ #include "pixis.h" #endif +/* define for SYS CLK or CLK1Frequency */ +#define TTL 1 +#define CLK2 0 +#define CRYSTAL 0 +#define MAX_VDW (511 + 8) +#define MAX_RDW (127 + 2) +#define MIN_VDW (4 + 8) +#define MIN_RDW (1 + 2) +#define NUM_OD_SETTING 8 +/* + * These defines cover the industrial temperature range part, + * for commercial, change below to 400000 and 55000, respectively + */ +#define MAX_VCO 360000 +#define MIN_VCO 60000 + /* decode S[0-2] to Output Divider (OD) */ static u8 ics307_s_to_od[] = { 10, 2, 8, 4, 5, 7, 3, 6 }; /* + * Find one solution to generate required frequency for SYSCLK + * out_freq: KHz, required frequency to the SYSCLK + * the result will be retuned with component RDW, VDW, OD, TTL, + * CLK2 and crystal + */ +unsigned long ics307_sysclk_calculator(unsigned long out_freq) +{ + const unsigned long input_freq = CONFIG_ICS307_REFCLK_HZ; + unsigned long vdw, rdw, odp, s_vdw = 0, s_rdw = 0, s_odp = 0, od; + unsigned long tmp_out, diff, result = 0; + int found = 0; + + for (odp = 0; odp < NUM_OD_SETTING; odp++) { + od = ics307_s_to_od[odp]; + if (od * out_freq < MIN_VCO || od * out_freq > MAX_VCO) + continue; + for (rdw = MIN_RDW; rdw <= MAX_RDW; rdw++) { + /* Calculate the VDW */ + vdw = out_freq * 1000 * od * rdw / (input_freq * 2); + if (vdw > MAX_VDW) + vdw = MAX_VDW; + if (vdw < MIN_VDW) + continue; + /* Calculate the temp out frequency */ + tmp_out = input_freq * 2 * vdw / (rdw * od * 1000); + diff = MAX(out_freq, tmp_out) - MIN(out_freq, tmp_out); + /* + * calculate the percent, the precision is 1/1000 + * If greater than 1/1000, continue + * otherwise, we think the solution is we required + */ + if (diff * 1000 / out_freq > 1) + continue; + else { + s_vdw = vdw; + s_rdw = rdw; + s_odp = odp; + found = 1; + break; + } + } + } + + if (found) + result = (s_rdw - 2) | (s_vdw - 8) << 7 | s_odp << 16 | + CLK2 << 19 | TTL << 21 | CRYSTAL << 22; + + debug("ICS307-02: RDW: %ld, VDW: %ld, OD: %d\n", s_rdw - 2, s_vdw - 8, + ics307_s_to_od[s_odp]); + return result; +} + +/* * Calculate frequency being generated by ICS307-02 clock chip based upon * the control bytes being programmed into it. */ diff --git a/board/freescale/common/ics307_clk.h b/board/freescale/common/ics307_clk.h index db3dbc4..3757912 100644 --- a/board/freescale/common/ics307_clk.h +++ b/board/freescale/common/ics307_clk.h @@ -1,5 +1,5 @@ /* - * Copyright 2010 Freescale Semiconductor, Inc. + * Copyright 2010-2011 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -23,8 +23,10 @@ #define __ICS_CLK_H_ 1 #ifndef __ASSEMBLY__ + extern unsigned long get_board_sys_clk(void); extern unsigned long get_board_ddr_clk(void); +extern unsigned long ics307_sysclk_calculator(unsigned long out_freq); #endif #endif /* __ICS_CLK_H_ */ diff --git a/board/freescale/common/ngpixis.c b/board/freescale/common/ngpixis.c index 765f035..276ae3c 100644 --- a/board/freescale/common/ngpixis.c +++ b/board/freescale/common/ngpixis.c @@ -156,9 +156,29 @@ static void pixis_dump_regs(void) } #endif +void pixis_sysclk_set(unsigned long sysclk) +{ + unsigned long freq_word; + u8 sclk0, sclk1, sclk2; + + freq_word = ics307_sysclk_calculator(sysclk); + sclk2 = freq_word & 0xff; + sclk1 = (freq_word >> 8) & 0xff; + sclk0 = (freq_word >> 16) & 0xff; + + /* set SYSCLK enable bit */ + PIXIS_WRITE(vcfgen0, 0x01); + + /* SYSCLK to required frequency */ + PIXIS_WRITE(sclk[0], sclk0); + PIXIS_WRITE(sclk[1], sclk1); + PIXIS_WRITE(sclk[2], sclk2); +} + int pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { unsigned int i; + unsigned long sysclk; char *p_altbank = NULL; #ifdef DEBUG char *p_dump = NULL; @@ -182,6 +202,12 @@ int pixis_reset_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) continue; } #endif + if (strcmp(argv[i], "sysclk") == 0) { + sysclk = simple_strtoul(argv[i + 1], NULL, 0); + i += 1; + pixis_sysclk_set(sysclk); + continue; + } unknown_param = argv[i]; } @@ -219,4 +245,5 @@ U_BOOT_CMD( #ifdef DEBUG "pixis_reset dump - display the PIXIS registers\n" #endif + "pixis_reset sysclk <SYSCLK_freq> - reset with SYSCLK frequency(KHz)\n" ); diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c index a35b5cf..8d07061 100644 --- a/board/freescale/common/pixis.c +++ b/board/freescale/common/pixis.c @@ -380,7 +380,7 @@ static unsigned long strfractoint(char *strptr) { int i, j; int mulconst; - int intarr_len, no_dec = 0; + int no_dec = 0; unsigned long intval = 0, decval = 0; char intarr[3], decarr[3]; @@ -399,8 +399,6 @@ static unsigned long strfractoint(char *strptr) i++; } - /* Assign length of integer part to intarr_len. */ - intarr_len = i; intarr[i] = '\0'; if (no_dec) { diff --git a/board/freescale/corenet_ds/eth_hydra.c b/board/freescale/corenet_ds/eth_hydra.c index a7a5e13..962f380 100644 --- a/board/freescale/corenet_ds/eth_hydra.c +++ b/board/freescale/corenet_ds/eth_hydra.c @@ -377,7 +377,6 @@ void fdt_fixup_board_enet(void *fdt) int board_eth_init(bd_t *bis) { #ifdef CONFIG_FMAN_ENET - struct dtsec *tsec = (void *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR; struct fsl_pq_mdio_info dtsec_mdio_info; struct tgec_mdio_info tgec_mdio_info; unsigned int i, slot; @@ -387,13 +386,6 @@ int board_eth_init(bd_t *bis) initialize_lane_to_slot(); - /* - * Set TBIPA on FM1@DTSEC1. This is needed for configurations - * where FM1@DTSEC1 isn't used directly, since it provides - * MDIO for other ports. - */ - out_be32(&tsec->tbipa, CONFIG_SYS_TBIPA_VALUE); - /* We want to use the PIXIS to configure MUX routing, not GPIOs. */ setbits_8(&pixis->brdcfg2, BRDCFG2_REG_GPIO_SEL); diff --git a/board/freescale/corenet_ds/eth_p4080.c b/board/freescale/corenet_ds/eth_p4080.c index 7ff00d1..1f00c14 100644 --- a/board/freescale/corenet_ds/eth_p4080.c +++ b/board/freescale/corenet_ds/eth_p4080.c @@ -301,7 +301,6 @@ int board_eth_init(bd_t *bis) { #ifdef CONFIG_FMAN_ENET ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); - struct dtsec *tsec = (void *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR; int i; struct fsl_pq_mdio_info dtsec_mdio_info; struct tgec_mdio_info tgec_mdio_info; @@ -327,13 +326,6 @@ int board_eth_init(bd_t *bis) SLOT5, /* 17 - Bank 3:D */ }; - /* - * Set TBIPA on FM1@DTSEC1. This is needed for configurations - * where FM1@DTSEC1 isn't used directly, since it provides - * MDIO for other ports. - */ - out_be32(&tsec->tbipa, CONFIG_SYS_TBIPA_VALUE); - /* Initialize the mdio_mux array so we can recognize empty elements */ for (i = 0; i < NUM_FM_PORTS; i++) mdio_mux[i] = EMI_NONE; diff --git a/board/freescale/mpc8548cds/mpc8548cds.c b/board/freescale/mpc8548cds/mpc8548cds.c index a8d57cd..e5563f7 100644 --- a/board/freescale/mpc8548cds/mpc8548cds.c +++ b/board/freescale/mpc8548cds/mpc8548cds.c @@ -33,6 +33,9 @@ #include <miiphy.h> #include <libfdt.h> #include <fdt_support.h> +#include <tsec.h> +#include <fsl_mdio.h> +#include <netdev.h> #include "../common/cadmus.h" #include "../common/eeprom.h" @@ -81,12 +84,10 @@ local_bus_init(void) volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; - uint lbc_hz; sys_info_t sysinfo; get_sys_info(&sysinfo); clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2; - lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; gur->lbiuiplldcr1 = 0x00078080; if (clkdiv == 16) { @@ -115,7 +116,6 @@ void lbc_sdram_init(void) uint idx; volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE; - uint cpu_board_rev; uint lsdmr_common; puts("LBC SDRAM: "); @@ -137,7 +137,6 @@ void lbc_sdram_init(void) /* * MPC8548 uses "new" 15-16 style addressing. */ - cpu_board_rev = get_cpu_board_revision(); lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON; lsdmr_common |= LSDMR_BSMA1516; @@ -287,7 +286,7 @@ void pci_init_board(void) fsl_pcie_init_board(first_free_busno); } -int last_stage_init(void) +void configure_rgmii(void) { unsigned short temp; @@ -295,29 +294,77 @@ int last_stage_init(void) /* This is needed to get the RGMII working for the 1.3+ * CDS cards */ if (get_board_version() == 0x13) { - miiphy_write(CONFIG_TSEC1_NAME, + miiphy_write(DEFAULT_MII_NAME, TSEC1_PHY_ADDR, 29, 18); - miiphy_read(CONFIG_TSEC1_NAME, + miiphy_read(DEFAULT_MII_NAME, TSEC1_PHY_ADDR, 30, &temp); temp = (temp & 0xf03f); temp |= 2 << 9; /* 36 ohm */ temp |= 2 << 6; /* 39 ohm */ - miiphy_write(CONFIG_TSEC1_NAME, + miiphy_write(DEFAULT_MII_NAME, TSEC1_PHY_ADDR, 30, temp); - miiphy_write(CONFIG_TSEC1_NAME, + miiphy_write(DEFAULT_MII_NAME, TSEC1_PHY_ADDR, 29, 3); - miiphy_write(CONFIG_TSEC1_NAME, + miiphy_write(DEFAULT_MII_NAME, TSEC1_PHY_ADDR, 30, 0x8000); } - return 0; + return; } +#ifdef CONFIG_TSEC_ENET +int board_eth_init(bd_t *bis) +{ + struct fsl_pq_mdio_info mdio_info; + struct tsec_info_struct tsec_info[4]; + int num = 0; + +#ifdef CONFIG_TSEC1 + SET_STD_TSEC_INFO(tsec_info[num], 1); + num++; +#endif +#ifdef CONFIG_TSEC2 + SET_STD_TSEC_INFO(tsec_info[num], 2); + num++; +#endif +#ifdef CONFIG_TSEC3 + /* initialize TSEC3 only if Carrier is 1.3 or above on CDS */ + if (get_board_version() >= 0x13) { + SET_STD_TSEC_INFO(tsec_info[num], 3); + tsec_info[num].interface = PHY_INTERFACE_MODE_RGMII_ID; + num++; + } +#endif +#ifdef CONFIG_TSEC4 + /* initialize TSEC4 only if Carrier is 1.3 or above on CDS */ + if (get_board_version() >= 0x13) { + SET_STD_TSEC_INFO(tsec_info[num], 4); + tsec_info[num].interface = PHY_INTERFACE_MODE_RGMII_ID; + num++; + } +#endif + + if (!num) { + printf("No TSECs initialized\n"); + + return 0; + } + + mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; + mdio_info.name = DEFAULT_MII_NAME; + fsl_pq_mdio_init(bis, &mdio_info); + + tsec_eth_init(bis, tsec_info, num); + configure_rgmii(); + + return pci_eth_init(bis); +} +#endif #if defined(CONFIG_OF_BOARD_SETUP) void ft_pci_setup(void *blob, bd_t *bd) diff --git a/board/freescale/mpc8568mds/mpc8568mds.c b/board/freescale/mpc8568mds/mpc8568mds.c index 225c5d8..6e3945e 100644 --- a/board/freescale/mpc8568mds/mpc8568mds.c +++ b/board/freescale/mpc8568mds/mpc8568mds.c @@ -147,12 +147,10 @@ local_bus_init(void) volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; - uint lbc_hz; sys_info_t sysinfo; get_sys_info(&sysinfo); clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2; - lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; gur->lbiuiplldcr1 = 0x00078080; if (clkdiv == 16) { @@ -302,6 +300,7 @@ pib_init(void) i2c_write(0x27, 0x3, 1, &val8, 1); asm("eieio"); + i2c_set_bus_num(orig_i2c_bus); } #ifdef CONFIG_PCI diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c index 89557d2..d119c65 100644 --- a/board/freescale/mpc8569mds/mpc8569mds.c +++ b/board/freescale/mpc8569mds/mpc8569mds.c @@ -303,12 +303,10 @@ local_bus_init(void) volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; - uint lbc_hz; sys_info_t sysinfo; get_sys_info(&sysinfo); clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2; - lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; out_be32(&gur->lbiuiplldcr1, 0x00078080); if (clkdiv == 16) diff --git a/board/freescale/mpc8572ds/tlb.c b/board/freescale/mpc8572ds/tlb.c index 575bdb5..6d60513 100644 --- a/board/freescale/mpc8572ds/tlb.c +++ b/board/freescale/mpc8572ds/tlb.c @@ -58,6 +58,7 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, 0, 2, BOOKE_PAGESZ_256M, 1), +#ifndef CONFIG_NAND_SPL /* *I*G* - PCI */ SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, @@ -76,6 +77,7 @@ struct fsl_e_tlb_entry tlb_table[] = { SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_VIRT, CONFIG_SYS_PCIE3_IO_PHYS, MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, 0, 6, BOOKE_PAGESZ_256K, 1), +#endif /* *I*G - NAND */ SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, diff --git a/board/freescale/p1010rdb/p1010rdb.c b/board/freescale/p1010rdb/p1010rdb.c index 03e9da1..b9e66f7 100644 --- a/board/freescale/p1010rdb/p1010rdb.c +++ b/board/freescale/p1010rdb/p1010rdb.c @@ -275,7 +275,9 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_memory(blob, (u64)base, (u64)size); +#if defined(CONFIG_HAS_FSL_DR_USB) fdt_fixup_dr_usb(blob, bd); +#endif /* P1014 and it's derivatives don't support CAN and eTSEC3 */ if (cpu->soc_ver == SVR_P1014 || cpu->soc_ver == SVR_P1014_E) { diff --git a/board/freescale/p1_p2_rdb/p1_p2_rdb.c b/board/freescale/p1_p2_rdb/p1_p2_rdb.c index 864b3ce..cfbae69 100644 --- a/board/freescale/p1_p2_rdb/p1_p2_rdb.c +++ b/board/freescale/p1_p2_rdb/p1_p2_rdb.c @@ -264,7 +264,9 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_fixup_memory(blob, (u64)base, (u64)size); +#if defined(CONFIG_HAS_FSL_DR_USB) fdt_fixup_dr_usb(blob, bd); +#endif #if defined(CONFIG_SDCARD) || defined(CONFIG_SPIFLASH) /* Delete eLBC node as it is muxed with USB2 controller */ diff --git a/board/freescale/p1_p2_rdb_pc/law.c b/board/freescale/p1_p2_rdb_pc/law.c index 5ff6ea6..7968919 100644 --- a/board/freescale/p1_p2_rdb_pc/law.c +++ b/board/freescale/p1_p2_rdb_pc/law.c @@ -25,15 +25,17 @@ #include <asm/mmu.h> struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_LBC), +#ifndef CONFIG_NAND_SPL SET_LAW(CONFIG_SYS_CPLD_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), SET_LAW(CONFIG_SYS_PMC_BASE_PHYS, LAW_SIZE_64K, LAW_TRGT_IF_LBC), -#ifdef CONFIG_SYS_NAND_BASE_PHYS - SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), -#endif #ifdef CONFIG_VSC7385_ENET SET_LAW(CONFIG_SYS_VSC7385_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), #endif +#endif + SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_LBC), +#ifdef CONFIG_SYS_NAND_BASE_PHYS + SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), +#endif }; int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c index 4671128..a60c5a2 100644 --- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c +++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c @@ -444,6 +444,9 @@ void ft_board_setup(void *blob, bd_t *bd) fdt_board_fixup_qe_pins(blob); #endif #endif + +#if defined(CONFIG_HAS_FSL_DR_USB) fdt_fixup_dr_usb(blob, bd); +#endif } #endif diff --git a/board/freescale/p2041rdb/eth.c b/board/freescale/p2041rdb/eth.c index 0a1dfa7..4b0d577 100644 --- a/board/freescale/p2041rdb/eth.c +++ b/board/freescale/p2041rdb/eth.c @@ -139,7 +139,6 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, int board_eth_init(bd_t *bis) { #ifdef CONFIG_FMAN_ENET - struct dtsec *tsec = (void *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR; struct fsl_pq_mdio_info dtsec_mdio_info; struct tgec_mdio_info tgec_mdio_info; unsigned int i, slot; @@ -149,13 +148,6 @@ int board_eth_init(bd_t *bis) initialize_lane_to_slot(); - /* - * Set TBIPA on FM1@DTSEC1. This is needed for configurations - * where FM1@DTSEC1 isn't used directly, since it provides - * MDIO for other ports. - */ - out_be32(&tsec->tbipa, CONFIG_SYS_TBIPA_VALUE); - dtsec_mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR; dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index e1a3ea3..26095a5 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -77,12 +77,10 @@ local_bus_init(void) volatile fsl_lbc_t *lbc = LBC_BASE_ADDR; uint clkdiv; - uint lbc_hz; sys_info_t sysinfo; get_sys_info(&sysinfo); clkdiv = (in_be32(&lbc->lcrr) & LCRR_CLKDIV) * 2; - lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv; out_be32(&gur->lbiuiplldcr1, 0x00078080); if (clkdiv == 16) { diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c index c5fe92e..98bc7df 100644 --- a/board/sbc8560/sbc8560.c +++ b/board/sbc8560/sbc8560.c @@ -348,7 +348,7 @@ phys_size_t fixed_sdram(void) void ft_board_setup(void *blob, bd_t *bd) { - int node, tmp[2]; + int node; #ifdef CONFIG_PCI const char *path; #endif @@ -356,7 +356,6 @@ ft_board_setup(void *blob, bd_t *bd) ft_cpu_setup(blob, bd); node = fdt_path_offset(blob, "/aliases"); - tmp[0] = 0; if (node >= 0) { #ifdef CONFIG_PCI path = fdt_getprop(blob, node, "pci0", NULL); |