diff options
Diffstat (limited to 'board')
-rw-r--r-- | board/delta/nand.c | 280 |
1 files changed, 78 insertions, 202 deletions
diff --git a/board/delta/nand.c b/board/delta/nand.c index 88e1902..5876727 100644 --- a/board/delta/nand.c +++ b/board/delta/nand.c @@ -28,17 +28,6 @@ #include <nand.h> #include <asm/arch/pxa-regs.h> -/* mk@tbd move this to pxa-regs */ -#define OSCR_CLK_FREQ 3.250 /* MHz */ - -/* usefull */ -#define CFG_DFC_DEBUG1 -/* noisy */ -#undef CFG_DFC_DEBUG2 -/* wild west */ -#undef CFG_DFC_DEBUG3 - - #ifdef CFG_DFC_DEBUG1 # define DFC_DEBUG1(fmt, args...) printf(fmt, ##args) #else @@ -57,6 +46,9 @@ # define DFC_DEBUG3(fmt, args...) #endif +#define MIN(x, y) ((x < y) ? x : y) + +/* These really don't belong here, as they are specific to the NAND Model */ static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; static struct nand_bbt_descr delta_bbt_descr = { @@ -77,13 +69,14 @@ static struct nand_oobinfo delta_oob = { /* * not required for Monahans DFC */ -static void delta_hwcontrol(struct mtd_info *mtdinfo, int cmd) +static void dfc_hwcontrol(struct mtd_info *mtdinfo, int cmd) { return; } +#if 0 /* read device ready pin */ -static int delta_device_ready(struct mtd_info *mtdinfo) +static int dfc_device_ready(struct mtd_info *mtdinfo) { if(NDSR & NDSR_RDY) return 1; @@ -91,18 +84,19 @@ static int delta_device_ready(struct mtd_info *mtdinfo) return 0; return 0; } +#endif /* * Write buf to the DFC Controller Data Buffer */ -static void delta_write_buf(struct mtd_info *mtd, const u_char *buf, int len) +static void dfc_write_buf(struct mtd_info *mtd, const u_char *buf, int len) { unsigned long bytes_multi = len & 0xfffffffc; unsigned long rest = len & 0x3; unsigned long *long_buf; int i; - DFC_DEBUG2("delta_write_buf: writing %d bytes starting with 0x%x.\n", len, *((unsigned long*) buf)); + DFC_DEBUG2("dfc_write_buf: writing %d bytes starting with 0x%x.\n", len, *((unsigned long*) buf)); if(bytes_multi) { for(i=0; i<bytes_multi; i+=4) { long_buf = (unsigned long*) &buf[i]; @@ -110,7 +104,7 @@ static void delta_write_buf(struct mtd_info *mtd, const u_char *buf, int len) } } if(rest) { - printf("delta_write_buf: ERROR, writing non 4-byte aligned data.\n"); + printf("dfc_write_buf: ERROR, writing non 4-byte aligned data.\n"); } return; } @@ -126,23 +120,23 @@ static void delta_write_buf(struct mtd_info *mtd, const u_char *buf, int len) * * Solution: Don't use these with Mona's DFC and complain loudly. */ -static void delta_write_word(struct mtd_info *mtd, u16 word) +static void dfc_write_word(struct mtd_info *mtd, u16 word) { - printf("delta_write_word: WARNING, this function does not work with the Monahans DFC!\n"); + printf("dfc_write_word: WARNING, this function does not work with the Monahans DFC!\n"); } -static void delta_write_byte(struct mtd_info *mtd, u_char byte) +static void dfc_write_byte(struct mtd_info *mtd, u_char byte) { - printf("delta_write_byte: WARNING, this function does not work with the Monahans DFC!\n"); + printf("dfc_write_byte: WARNING, this function does not work with the Monahans DFC!\n"); } /* The original: - * static void delta_read_buf(struct mtd_info *mtd, const u_char *buf, int len) + * static void dfc_read_buf(struct mtd_info *mtd, const u_char *buf, int len) * * Shouldn't this be "u_char * const buf" ? */ -static void delta_read_buf(struct mtd_info *mtd, u_char* const buf, int len) +static void dfc_read_buf(struct mtd_info *mtd, u_char* const buf, int len) { - int i, j; + int i=0, j; /* we have to be carefull not to overflow the buffer if len is * not a multiple of 4 */ @@ -150,7 +144,7 @@ static void delta_read_buf(struct mtd_info *mtd, u_char* const buf, int len) unsigned long rest = len & 0x3; unsigned long *long_buf; - DFC_DEBUG3("delta_read_buf: reading %d bytes.\n", len); + DFC_DEBUG3("dfc_read_buf: reading %d bytes.\n", len); /* if there are any, first copy multiple of 4 bytes */ if(bytes_multi) { for(i=0; i<bytes_multi; i+=4) { @@ -172,23 +166,31 @@ static void delta_read_buf(struct mtd_info *mtd, u_char* const buf, int len) /* * read a word. Not implemented as not used in NAND code. */ -static u16 delta_read_word(struct mtd_info *mtd) +static u16 dfc_read_word(struct mtd_info *mtd) { - printf("delta_write_byte: UNIMPLEMENTED.\n"); + printf("dfc_write_byte: UNIMPLEMENTED.\n"); + return 0; } /* global var, too bad: mk@tbd: move to ->priv pointer */ static unsigned long read_buf = 0; static int bytes_read = -1; -static unsigned long last_cmd = 0; -/* read a byte from NDDB Because we can only read 4 bytes from NDDB at +/* + * read a byte from NDDB Because we can only read 4 bytes from NDDB at * a time, we buffer the remaining bytes. The buffer is reset when a * new command is sent to the chip. + * + * WARNING: + * This function is currently only used to read status and id + * bytes. For these commands always 8 bytes need to be read from + * NDDB. So we read and discard these bytes right now. In case this + * function is used for anything else in the future, we must check + * what was the last command issued and read the appropriate amount of + * bytes respectively. */ -static u_char delta_read_byte(struct mtd_info *mtd) +static u_char dfc_read_byte(struct mtd_info *mtd) { -/* struct nand_chip *this = mtd->priv; */ unsigned char byte; unsigned long dummy; @@ -201,7 +203,7 @@ static u_char delta_read_byte(struct mtd_info *mtd) if(bytes_read >= 4) bytes_read = -1; - DFC_DEBUG2("delta_read_byte: byte %u: 0x%x of (0x%x).\n", bytes_read - 1, byte, read_buf); + DFC_DEBUG2("dfc_read_byte: byte %u: 0x%x of (0x%x).\n", bytes_read - 1, byte, read_buf); return byte; } @@ -227,14 +229,14 @@ static void wait_us(unsigned long us) } } -static void delta_clear_nddb() +static void dfc_clear_nddb() { NDCR &= ~NDCR_ND_RUN; wait_us(CFG_NAND_OTHER_TO); } /* wait_event with timeout */ -static unsigned long delta_wait_event2(unsigned long event) +static unsigned long dfc_wait_event(unsigned long event) { unsigned long ndsr, timeout, start = OSCR; @@ -252,7 +254,7 @@ static unsigned long delta_wait_event2(unsigned long event) break; } if(get_delta(start) > timeout) { - DFC_DEBUG1("delta_wait_event: TIMEOUT waiting for event: 0x%x.\n", event); + DFC_DEBUG1("dfc_wait_event: TIMEOUT waiting for event: 0x%x.\n", event); return 0xff000000; } @@ -260,25 +262,8 @@ static unsigned long delta_wait_event2(unsigned long event) return ndsr; } - -#if DEADCODE -/* poll the NAND Controller Status Register for event */ -static void delta_wait_event(unsigned long event) -{ - if(!event) - return; - - while(1) { - if(NDSR & event) { - NDSR |= event; - break; - } - } -} -#endif - /* we don't always wan't to do this */ -static void delta_new_cmd() +static void dfc_new_cmd() { int retry = 0; unsigned long status; @@ -291,29 +276,20 @@ static void delta_new_cmd() if(!(NDCR & NDCR_ND_RUN)) NDCR |= NDCR_ND_RUN; - status = delta_wait_event2(NDSR_WRCMDREQ); + status = dfc_wait_event(NDSR_WRCMDREQ); if(status & NDSR_WRCMDREQ) return; - DFC_DEBUG2("delta_new_cmd: FAILED to get WRITECMDREQ, retry: %d.\n", retry); - delta_clear_nddb(); - } - DFC_DEBUG1("delta_new_cmd: giving up after %d retries.\n", retry); - -#if DEADCODE - while(1) { - if(NDSR & NDSR_WRCMDREQ) { - NDSR |= NDSR_WRCMDREQ; /* Ack */ - break; - } + DFC_DEBUG2("dfc_new_cmd: FAILED to get WRITECMDREQ, retry: %d.\n", retry); + dfc_clear_nddb(); } -#endif - + DFC_DEBUG1("dfc_new_cmd: giving up after %d retries.\n", retry); } + /* this function is called after Programm and Erase Operations to * check for success or failure */ -static int delta_wait(struct mtd_info *mtd, struct nand_chip *this, int state) +static int dfc_wait(struct mtd_info *mtd, struct nand_chip *this, int state) { unsigned long ndsr=0, event=0; @@ -328,7 +304,7 @@ static int delta_wait(struct mtd_info *mtd, struct nand_chip *this, int state) event = NDSR_CS0_CMDD | NDSR_CS0_BBD; } - ndsr = delta_wait_event2(event); + ndsr = dfc_wait_event(event); if((ndsr & NDSR_CS0_BBD) || (ndsr & 0xff000000)) return(0x1); /* Status Read error */ @@ -336,26 +312,20 @@ static int delta_wait(struct mtd_info *mtd, struct nand_chip *this, int state) } /* cmdfunc send commands to the DFC */ -static void delta_cmdfunc(struct mtd_info *mtd, unsigned command, - int column, int page_addr) +static void dfc_cmdfunc(struct mtd_info *mtd, unsigned command, + int column, int page_addr) { /* register struct nand_chip *this = mtd->priv; */ unsigned long ndcb0=0, ndcb1=0, ndcb2=0, event=0; - unsigned long what_the_hack; /* clear the ugly byte read buffer */ bytes_read = -1; read_buf = 0; - last_cmd = 0; - - /* if command is a double byte cmd, we set bit double cmd bit 19 */ - /* command2 = (command>>8) & 0xFF; */ - /* ndcb0 = command | ((command2 ? 1 : 0) << 19); *\/ */ switch (command) { case NAND_CMD_READ0: - DFC_DEBUG3("delta_cmdfunc: NAND_CMD_READ0, page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1)); - delta_new_cmd(); + DFC_DEBUG3("dfc_cmdfunc: NAND_CMD_READ0, page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1)); + dfc_new_cmd(); ndcb0 = (NAND_CMD_READ0 | (4<<16)); column >>= 1; /* adjust for 16 bit bus */ ndcb1 = (((column>>1) & 0xff) | @@ -365,35 +335,34 @@ static void delta_cmdfunc(struct mtd_info *mtd, unsigned command, event = NDSR_RDDREQ; goto write_cmd; case NAND_CMD_READ1: - DFC_DEBUG2("delta_cmdfunc: NAND_CMD_READ1 unimplemented!\n"); + DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_READ1 unimplemented!\n"); goto end; case NAND_CMD_READOOB: - DFC_DEBUG1("delta_cmdfunc: NAND_CMD_READOOB unimplemented!\n"); + DFC_DEBUG1("dfc_cmdfunc: NAND_CMD_READOOB unimplemented!\n"); goto end; case NAND_CMD_READID: - last_cmd = NAND_CMD_READID; - delta_new_cmd(); - DFC_DEBUG2("delta_cmdfunc: NAND_CMD_READID.\n"); + dfc_new_cmd(); + DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_READID.\n"); ndcb0 = (NAND_CMD_READID | (3 << 21) | (1 << 16)); /* addr cycles*/ event = NDSR_RDDREQ; goto write_cmd; case NAND_CMD_PAGEPROG: /* sent as a multicommand in NAND_CMD_SEQIN */ - DFC_DEBUG2("delta_cmdfunc: NAND_CMD_PAGEPROG empty due to multicmd.\n"); + DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_PAGEPROG empty due to multicmd.\n"); goto end; case NAND_CMD_ERASE1: - DFC_DEBUG2("delta_cmdfunc: NAND_CMD_ERASE1, page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1)); - delta_new_cmd(); + DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_ERASE1, page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1)); + dfc_new_cmd(); ndcb0 = (0xd060 | (1<<25) | (2<<21) | (1<<19) | (3<<16)); ndcb1 = (page_addr & 0x00ffffff); goto write_cmd; case NAND_CMD_ERASE2: - DFC_DEBUG2("delta_cmdfunc: NAND_CMD_ERASE2 empty due to multicmd.\n"); + DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_ERASE2 empty due to multicmd.\n"); goto end; case NAND_CMD_SEQIN: /* send PAGE_PROG command(0x1080) */ - delta_new_cmd(); - DFC_DEBUG2("delta_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG, page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1)); + dfc_new_cmd(); + DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG, page_addr: 0x%x, column: 0x%x.\n", page_addr, (column>>1)); ndcb0 = (0x1080 | (1<<25) | (1<<21) | (1<<19) | (4<<16)); column >>= 1; /* adjust for 16 bit bus */ ndcb1 = (((column>>1) & 0xff) | @@ -402,72 +371,19 @@ static void delta_cmdfunc(struct mtd_info *mtd, unsigned command, ((page_addr<<8) & 0xff000000)); /* make this 0x01000000 ? */ event = NDSR_WRDREQ; goto write_cmd; -/* case NAND_CMD_SEQIN_pointer_operation: */ - -/* /\* This is confusing because the command names are */ -/* * different compared to the ones in the K9K12Q0C */ -/* * datasheet. Infact this has nothing to do with */ -/* * reading, as the but with page programming */ -/* * (writing). */ -/* * Here we send the multibyte commands */ -/* * cmd1=0x00, cmd2=0x80 (for programming main area) or */ -/* * cmd1=0x50, cmd2=0x80 (for spare area) */ -/* * */ -/* * When all data is written to the buffer, the page */ -/* * program command (0x10) is sent to actually write */ -/* * the data. */ -/* *\/ */ - -/* printf("delta_cmdfunc: NAND_CMD_SEQIN pointer op called.\n"); */ - -/* ndcb0 = (NAND_CMD_SEQIN<<8) | (1<<21) | (1<<19) | (4<<16); */ -/* if(column >= mtd->oobblock) { */ -/* /\* OOB area *\/ */ -/* column -= mtd->oobblock; */ -/* ndcb0 |= NAND_CMD_READOOB; */ -/* } else if (column < 256) { */ -/* /\* First 256 bytes --> READ0 *\/ */ -/* ndcb0 |= NAND_CMD_READ0; */ -/* } else { */ -/* /\* Only for 8 bit devices - not delta!!! *\/ */ -/* column -= 256; */ -/* ndcb0 |= NAND_CMD_READ1; */ -/* } */ -/* event = NDSR_WRDREQ; */ -/* break; */ case NAND_CMD_STATUS: - DFC_DEBUG2("delta_cmdfunc: NAND_CMD_STATUS.\n"); - /* oh, this is not nice. for some reason the real - * status byte is in the second read from the data - * buffer. The hack is to read the first byte right - * here, so the next read access by the nand code - * yields the right one. - */ - delta_new_cmd(); + DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_STATUS.\n"); + dfc_new_cmd(); ndcb0 = NAND_CMD_STATUS | (4<<21); event = NDSR_RDDREQ; -#undef READ_STATUS_BUG -#ifdef READ_STATUS_BUG - NDCB0 = ndcb0; - NDCB0 = ndcb1; - NDCB0 = ndcb2; - delta_wait_event2(event); - what_the_hack = NDDB; - if(what_the_hack != 0xffffffff) { - DFC_DEBUG2("what the hack.\n"); - read_buf = what_the_hack; - bytes_read = 0; - } - goto end; -#endif goto write_cmd; case NAND_CMD_RESET: - DFC_DEBUG2("delta_cmdfunc: NAND_CMD_RESET.\n"); + DFC_DEBUG2("dfc_cmdfunc: NAND_CMD_RESET.\n"); ndcb0 = NAND_CMD_RESET | (5<<21); event = NDSR_CS0_CMDD; goto write_cmd; default: - printk("delta_cmdfunc: error, unsupported command.\n"); + printk("dfc_cmdfunc: error, unsupported command.\n"); goto end; } @@ -476,13 +392,13 @@ static void delta_cmdfunc(struct mtd_info *mtd, unsigned command, NDCB0 = ndcb1; NDCB0 = ndcb2; - wait_event: - delta_wait_event2(event); + /* wait_event: */ + dfc_wait_event(event); end: return; } -static void delta_dfc_gpio_init() +static void dfc_gpio_init() { DFC_DEBUG2("Setting up DFC GPIO's.\n"); @@ -542,51 +458,11 @@ void board_nand_init(struct nand_chip *nand) unsigned long tCH, tCS, tWH, tWP, tRH, tRP, tRP_high, tR, tWHR, tAR; /* set up GPIO Control Registers */ - delta_dfc_gpio_init(); + dfc_gpio_init(); /* turn on the NAND Controller Clock (104 MHz @ D0) */ CKENA |= (CKENA_4_NAND | CKENA_9_SMC); - /* wait ? */ -/* printf("stupid loop start...\n"); */ -/* wait(200); */ -/* printf("stupid loop end.\n"); */ - - - /* NAND Timing Parameters (in ns) */ -#define NAND_TIMING_tCH 10 -#define NAND_TIMING_tCS 0 -#define NAND_TIMING_tWH 20 -#define NAND_TIMING_tWP 40 - -#define NAND_TIMING_tRH 20 -#define NAND_TIMING_tRP 40 - -/* #define NAND_TIMING_tRH 25 */ -/* #define NAND_TIMING_tRP 50 */ - -#define NAND_TIMING_tR 11123 -/* #define NAND_TIMING_tWHR 110 */ -#define NAND_TIMING_tWHR 100 -#define NAND_TIMING_tAR 10 - -/* Maximum values for NAND Interface Timing Registers in DFC clock - * periods */ -#define DFC_MAX_tCH 7 -#define DFC_MAX_tCS 7 -#define DFC_MAX_tWH 7 -#define DFC_MAX_tWP 7 -#define DFC_MAX_tRH 7 -#define DFC_MAX_tRP 15 -#define DFC_MAX_tR 65535 -#define DFC_MAX_tWHR 15 -#define DFC_MAX_tAR 15 - -#define DFC_CLOCK 104 /* DFC Clock is 104 MHz */ -#define DFC_CLK_PER_US DFC_CLOCK/1000 /* clock period in ns */ -#define MIN(x, y) ((x < y) ? x : y) - - #undef CFG_TIMING_TIGHT #ifndef CFG_TIMING_TIGHT tCH = MIN(((unsigned long) (NAND_TIMING_tCH * DFC_CLK_PER_US) + 1), @@ -692,25 +568,25 @@ void board_nand_init(struct nand_chip *nand) /* wait(10); */ - nand->hwcontrol = delta_hwcontrol; -/* nand->dev_ready = delta_device_ready; */ + nand->hwcontrol = dfc_hwcontrol; +/* nand->dev_ready = dfc_device_ready; */ nand->eccmode = NAND_ECC_SOFT; nand->chip_delay = NAND_DELAY_US; nand->options = NAND_BUSWIDTH_16; - nand->waitfunc = delta_wait; - nand->read_byte = delta_read_byte; - nand->write_byte = delta_write_byte; - nand->read_word = delta_read_word; - nand->write_word = delta_write_word; - nand->read_buf = delta_read_buf; - nand->write_buf = delta_write_buf; - - nand->cmdfunc = delta_cmdfunc; + nand->waitfunc = dfc_wait; + nand->read_byte = dfc_read_byte; + nand->write_byte = dfc_write_byte; + nand->read_word = dfc_read_word; + nand->write_word = dfc_write_word; + nand->read_buf = dfc_read_buf; + nand->write_buf = dfc_write_buf; + + nand->cmdfunc = dfc_cmdfunc; nand->autooob = &delta_oob; nand->badblock_pattern = &delta_bbt_descr; } #else - #error "U-Boot legacy NAND support not available for delta board." + #error "U-Boot legacy NAND support not available for Monahans DFC." #endif #endif |