diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/xpedite1k/Makefile | 48 | ||||
| -rw-r--r-- | board/xpedite1k/config.mk | 44 | ||||
| -rw-r--r-- | board/xpedite1k/flash.c | 607 | ||||
| -rw-r--r-- | board/xpedite1k/init.S | 96 | ||||
| -rw-r--r-- | board/xpedite1k/u-boot.lds | 155 | ||||
| -rw-r--r-- | board/xpedite1k/u-boot.lds.debug | 144 | ||||
| -rw-r--r-- | board/xpedite1k/xpedite1k.c | 358 |
7 files changed, 1452 insertions, 0 deletions
diff --git a/board/xpedite1k/Makefile b/board/xpedite1k/Makefile new file mode 100644 index 0000000..c5c0915 --- /dev/null +++ b/board/xpedite1k/Makefile @@ -0,0 +1,48 @@ +# +# (C) Copyright 2002-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = lib$(BOARD).a + +OBJS = $(BOARD).o +OBJS +=flash.o +SOBJS = init.o + +$(LIB): $(OBJS) $(SOBJS) + $(AR) crv $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c) + $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@ + +sinclude .depend + +######################################################################### diff --git a/board/xpedite1k/config.mk b/board/xpedite1k/config.mk new file mode 100644 index 0000000..c0f0da8 --- /dev/null +++ b/board/xpedite1k/config.mk @@ -0,0 +1,44 @@ +# +# (C) Copyright 2002-2004 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +# +# esd ADCIOP boards +# + +#TEXT_BASE = 0xFFFE0000 + +ifeq ($(ramsym),1) +TEXT_BASE = 0x07FD0000 +else +TEXT_BASE = 0xFFF80000 +endif + +PLATFORM_CPPFLAGS += -DCONFIG_440=1 + +ifeq ($(debug),1) +PLATFORM_CPPFLAGS += -DDEBUG +endif + +ifeq ($(dbcr),1) +PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000 +endif diff --git a/board/xpedite1k/flash.c b/board/xpedite1k/flash.c new file mode 100644 index 0000000..ce5d4e1 --- /dev/null +++ b/board/xpedite1k/flash.c @@ -0,0 +1,607 @@ +/* + * (C) Copyright 2002-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2002 Jun Gu <jung@artesyncp.com> + * Add support for Am29F016D and dynamic switch setting. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * Modified 4/5/2001 + * Wait for completion of each sector erase command issued + * 4/5/2001 + * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com + */ + +/* + * Ported to XPedite1000, 1/2 mb boot flash only + * Travis B. Sawyer, <travis.sawyer@sandburst.com> + */ + +#include <common.h> +#include <ppc4xx.h> +#include <asm/processor.h> + + +#undef DEBUG +#ifdef DEBUG +#define DEBUGF(x...) printf(x) +#else +#define DEBUGF(x...) +#endif /* DEBUG */ + +#define BOOT_SMALL_FLASH 32 /* 00100000 */ +#define FLASH_ONBD_N 2 /* 00000010 */ +#define FLASH_SRAM_SEL 1 /* 00000001 */ + +#define BOOT_SMALL_FLASH_VAL 4 +#define FLASH_ONBD_N_VAL 2 +#define FLASH_SRAM_SEL_VAL 1 + + +flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ + +static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = { + {0xfff80000}, /* 0:000: configuraton 3 */ + {0xfff90000}, /* 1:001: configuraton 4 */ + {0xfffa0000}, /* 2:010: configuraton 7 */ + {0xfffb0000}, /* 3:011: configuraton 8 */ + {0xfffc0000}, /* 4:100: configuraton 1 */ + {0xfffd0000}, /* 5:101: configuraton 2 */ + {0xfffe0000}, /* 6:110: configuraton 5 */ + {0xffff0000} /* 7:111: configuraton 6 */ +}; + +/*----------------------------------------------------------------------- + * Functions + */ +static ulong flash_get_size (vu_long *addr, flash_info_t *info); +static int write_word (flash_info_t *info, ulong dest, ulong data); + + +#ifdef CONFIG_XPEDITE1K +#define ADDR0 0x5555 +#define ADDR1 0x2aaa +#define FLASH_WORD_SIZE unsigned char +#endif + +/*----------------------------------------------------------------------- + */ + +unsigned long flash_init (void) +{ + unsigned long total_b = 0; + unsigned long size_b[CFG_MAX_FLASH_BANKS]; + unsigned short index = 0; + int i; + + + DEBUGF("\n"); + DEBUGF("FLASH: Index: %d\n", index); + + /* Init: no FLASHes known */ + for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) { + flash_info[i].flash_id = FLASH_UNKNOWN; + flash_info[i].sector_count = -1; + flash_info[i].size = 0; + + /* check whether the address is 0 */ + if (flash_addr_table[index][i] == 0) { + continue; + } + + /* call flash_get_size() to initialize sector address */ + size_b[i] = flash_get_size( + (vu_long *)flash_addr_table[index][i], &flash_info[i]); + flash_info[i].size = size_b[i]; + if (flash_info[i].flash_id == FLASH_UNKNOWN) { + printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", + i, size_b[i], size_b[i]<<20); + flash_info[i].sector_count = -1; + flash_info[i].size = 0; + } + + total_b += flash_info[i].size; + } + + return total_b; +} + + +/*----------------------------------------------------------------------- + */ +void flash_print_info (flash_info_t *info) +{ + int i; + int k; + int size; + int erased; + volatile unsigned long *flash; + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("missing or unknown FLASH type\n"); + return; + } + + switch (info->flash_id & FLASH_VENDMASK) { + case FLASH_MAN_AMD: printf ("AMD "); break; + case FLASH_MAN_FUJ: printf ("FUJITSU "); break; + case FLASH_MAN_SST: printf ("SST "); break; + default: printf ("Unknown Vendor "); break; + } + + switch (info->flash_id & FLASH_TYPEMASK) { + case FLASH_AMD016: printf ("AM29F016D (16 Mbit, uniform sector size)\n"); + break; + case FLASH_AM040: printf ("AM29F040 (512 Kbit, uniform sector size)\n"); + break; + case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n"); + break; + case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n"); + break; + case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n"); + break; + case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n"); + break; + case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n"); + break; + case FLASH_SST800A: printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n"); + break; + case FLASH_SST160A: printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n"); + break; + default: printf ("Unknown Chip Type\n"); + break; + } + + printf (" Size: %ld KB in %d Sectors\n", + info->size >> 10, info->sector_count); + + printf (" Sector Start Addresses:"); + for (i=0; i<info->sector_count; ++i) { + /* + * Check if whole sector is erased + */ + if (i != (info->sector_count-1)) + size = info->start[i+1] - info->start[i]; + else + size = info->start[0] + info->size - info->start[i]; + erased = 1; + flash = (volatile unsigned long *)info->start[i]; + size = size >> 2; /* divide by 4 for longword access */ + for (k=0; k<size; k++) + { + if (*flash++ != 0xffffffff) + { + erased = 0; + break; + } + } + + if ((i % 5) == 0) + printf ("\n "); + printf (" %08lX%s%s", + info->start[i], + erased ? " E" : " ", + info->protect[i] ? "RO " : " " + ); + } + printf ("\n"); + return; + } + +/*----------------------------------------------------------------------- + */ + + +/*----------------------------------------------------------------------- + */ + +/* + * The following code cannot be run from FLASH! + */ +static ulong flash_get_size (vu_long *addr, flash_info_t *info) +{ + short i; + FLASH_WORD_SIZE value; + ulong base = (ulong)addr; + volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr; + + DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr ); + + /* Write auto select command: read Manufacturer ID */ + udelay(10000); + addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; + udelay(1000); + addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055; + udelay(1000); + addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090; + udelay(1000); + +#ifdef CONFIG_ADCIOP + value = addr2[2]; +#else + value = addr2[0]; +#endif + + DEBUGF("FLASH MANUFACT: %x\n", value); + + switch (value) { + case (FLASH_WORD_SIZE)AMD_MANUFACT: + info->flash_id = FLASH_MAN_AMD; + break; + case (FLASH_WORD_SIZE)FUJ_MANUFACT: + info->flash_id = FLASH_MAN_FUJ; + break; + case (FLASH_WORD_SIZE)SST_MANUFACT: + info->flash_id = FLASH_MAN_SST; + break; + case (FLASH_WORD_SIZE)STM_MANUFACT: + info->flash_id = FLASH_MAN_STM; + break; + default: + info->flash_id = FLASH_UNKNOWN; + info->sector_count = 0; + info->size = 0; + return (0); /* no or unknown flash */ + } + +#ifdef CONFIG_ADCIOP + value = addr2[0]; /* device ID */ + debug ("\ndev_code=%x\n", value); +#else + value = addr2[1]; /* device ID */ +#endif + + DEBUGF("\nFLASH DEVICEID: %x\n", value); + + switch (value) { + case (FLASH_WORD_SIZE)AMD_ID_LV040B: + info->flash_id += FLASH_AM040; + info->sector_count = 8; + info->size = 0x00080000; /* => 512 kb */ + break; + + default: + info->flash_id = FLASH_UNKNOWN; + return (0); /* => no or unknown flash */ + + } + + /* set up sector start address table */ + if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) || + (info->flash_id == FLASH_AM040) || + (info->flash_id == FLASH_AMD016)) { + for (i = 0; i < info->sector_count; i++) + info->start[i] = base + (i * 0x00010000); + } else { + if (info->flash_id & FLASH_BTYPE) { + /* set sector offsets for bottom boot block type */ + info->start[0] = base + 0x00000000; + info->start[1] = base + 0x00004000; + info->start[2] = base + 0x00006000; + info->start[3] = base + 0x00008000; + for (i = 4; i < info->sector_count; i++) { + info->start[i] = base + (i * 0x00010000) - 0x00030000; + } + } else { + /* set sector offsets for top boot block type */ + i = info->sector_count - 1; + info->start[i--] = base + info->size - 0x00004000; + info->start[i--] = base + info->size - 0x00006000; + info->start[i--] = base + info->size - 0x00008000; + for (; i >= 0; i--) { + info->start[i] = base + i * 0x00010000; + } + } + } + + /* check for protected sectors */ + for (i = 0; i < info->sector_count; i++) { + /* read sector protection at sector address, (A7 .. A0) = 0x02 */ + /* D0 = 1 if protected */ +#ifdef CONFIG_ADCIOP + addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]); + info->protect[i] = addr2[4] & 1; +#else + addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]); + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) + info->protect[i] = 0; + else + info->protect[i] = addr2[2] & 1; +#endif + } + + /* + * Prevent writes to uninitialized FLASH. + */ + if (info->flash_id != FLASH_UNKNOWN) { +#if 0 /* test-only */ +#ifdef CONFIG_ADCIOP + addr2 = (volatile unsigned char *)info->start[0]; + addr2[ADDR0] = 0xAA; + addr2[ADDR1] = 0x55; + addr2[ADDR0] = 0xF0; /* reset bank */ +#else + addr2 = (FLASH_WORD_SIZE *)info->start[0]; + *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */ +#endif +#else /* test-only */ + addr2 = (FLASH_WORD_SIZE *)info->start[0]; + *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */ +#endif /* test-only */ + } + + return (info->size); +} + +int wait_for_DQ7(flash_info_t *info, int sect) +{ + ulong start, now, last; + volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]); + + start = get_timer (0); + last = start; + while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) { + if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { + printf ("Timeout\n"); + return -1; + } + /* show that we're waiting */ + if ((now - last) > 1000) { /* every second */ + putc ('.'); + last = now; + } + } + return 0; +} + +/*----------------------------------------------------------------------- + */ + +int flash_erase (flash_info_t *info, int s_first, int s_last) +{ + volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]); + volatile FLASH_WORD_SIZE *addr2; + int flag, prot, sect, l_sect; + int i; + + if ((s_first < 0) || (s_first > s_last)) { + if (info->flash_id == FLASH_UNKNOWN) { + printf ("- missing\n"); + } else { + printf ("- no sectors to erase\n"); + } + return 1; + } + + if (info->flash_id == FLASH_UNKNOWN) { + printf ("Can't erase unknown flash type - aborted\n"); + return 1; + } + + prot = 0; + for (sect=s_first; sect<=s_last; ++sect) { + if (info->protect[sect]) { + prot++; + } + } + + if (prot) { + printf ("- Warning: %d protected sectors will not be erased!\n", + prot); + } else { + printf ("\n"); + } + + l_sect = -1; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts(); + + /* Start erase on unprotected sectors */ + for (sect = s_first; sect<=s_last; sect++) { + if (info->protect[sect] == 0) { /* not protected */ + addr2 = (FLASH_WORD_SIZE *)(info->start[sect]); + printf("Erasing sector %p\n", addr2); + + if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { + addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; + addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; + addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080; + addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; + addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; + addr2[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */ + for (i=0; i<50; i++) + udelay(1000); /* wait 1 ms */ + } else { + addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; + addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; + addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080; + addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; + addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; + addr2[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */ + } + l_sect = sect; + /* + * Wait for each sector to complete, it's more + * reliable. According to AMD Spec, you must + * issue all erase commands within a specified + * timeout. This has been seen to fail, especially + * if printf()s are included (for debug)!! + */ + wait_for_DQ7(info, sect); + } + } + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts(); + + /* wait at least 80us - let's wait 1 ms */ + udelay (1000); + +#if 0 + /* + * We wait for the last triggered sector + */ + if (l_sect < 0) + goto DONE; + wait_for_DQ7(info, l_sect); + +DONE: +#endif + /* reset to read mode */ + addr = (FLASH_WORD_SIZE *)info->start[0]; + addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */ + + printf (" done\n"); + return 0; +} + +/*----------------------------------------------------------------------- + * Copy memory to flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ + +int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + ulong cp, wp, data; + int i, l, rc; + + wp = (addr & ~3); /* get lower word aligned address */ + + /* + * handle unaligned start bytes + */ + if ((l = addr - wp) != 0) { + data = 0; + for (i=0, cp=wp; i<l; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + for (; i<4 && cnt>0; ++i) { + data = (data << 8) | *src++; + --cnt; + ++cp; + } + for (; cnt==0 && i<4; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + + if ((rc = write_word(info, wp, data)) != 0) { + return (rc); + } + wp += 4; + } + + /* + * handle word aligned part + */ + while (cnt >= 4) { + data = 0; + for (i=0; i<4; ++i) { + data = (data << 8) | *src++; + } + if ((rc = write_word(info, wp, data)) != 0) { + return (rc); + } + wp += 4; + cnt -= 4; + } + + if (cnt == 0) { + return (0); + } + + /* + * handle unaligned tail bytes + */ + data = 0; + for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { + data = (data << 8) | *src++; + --cnt; + } + for (; i<4; ++i, ++cp) { + data = (data << 8) | (*(uchar *)cp); + } + + return (write_word(info, wp, data)); +} + +/*----------------------------------------------------------------------- + * Write a word to Flash, returns: + * 0 - OK + * 1 - write timeout + * 2 - Flash not erased + */ +static int write_word (flash_info_t * info, ulong dest, ulong data) +{ + volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]); + volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest; + volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data; + ulong start; + int i; + + /* Check if Flash is (sufficiently) erased */ + if ((*((volatile FLASH_WORD_SIZE *) dest) & + (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) { + return (2); + } + + for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) { + int flag; + + /* Disable interrupts which might cause a timeout here */ + flag = disable_interrupts (); + + addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA; + addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055; + addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0; + + dest2[i] = data2[i]; + + /* re-enable interrupts if necessary */ + if (flag) + enable_interrupts (); + + /* data polling for D7 */ + start = get_timer (0); + while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) != + (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) { + + if (get_timer (start) > CFG_FLASH_WRITE_TOUT) { + return (1); + } + } + } + + return (0); +} + +/*----------------------------------------------------------------------- + */ diff --git a/board/xpedite1k/init.S b/board/xpedite1k/init.S new file mode 100644 index 0000000..6cb20e4 --- /dev/null +++ b/board/xpedite1k/init.S @@ -0,0 +1,96 @@ +/* +* Copyright (C) 2002 Scott McNutt <smcnutt@artesyncp.com> +* +* See file CREDITS for list of people who contributed to this +* project. +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation; either version 2 of +* the License, or (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program; if not, write to the Free Software +* Foundation, Inc., 59 Temple Place, Suite 330, Boston, +* MA 02111-1307 USA +*/ + +#include <ppc_asm.tmpl> +#include <config.h> + +/* General */ +#define TLB_VALID 0x00000200 + +/* Supported page sizes */ + +#define SZ_1K 0x00000000 +#define SZ_4K 0x00000010 +#define SZ_16K 0x00000020 +#define SZ_64K 0x00000030 +#define SZ_256K 0x00000040 +#define SZ_1M 0x00000050 +#define SZ_16M 0x00000070 +#define SZ_256M 0x00000090 + +/* Storage attributes */ +#define SA_W 0x00000800 /* Write-through */ +#define SA_I 0x00000400 /* Caching inhibited */ +#define SA_M 0x00000200 /* Memory coherence */ +#define SA_G 0x00000100 /* Guarded */ +#define SA_E 0x00000080 /* Endian */ + +/* Access control */ +#define AC_X 0x00000024 /* Execute */ +#define AC_W 0x00000012 /* Write */ +#define AC_R 0x00000009 /* Read */ + +/* Some handy macros */ + +#define EPN(e) ((e) & 0xfffffc00) +#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) ) +#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) ) +#define TLB2(a) ( (a)&0x00000fbf ) + +#define tlbtab_start\ + mflr r1 ;\ + bl 0f ; + +#define tlbtab_end\ + .long 0, 0, 0 ; \ +0: mflr r0 ; \ + mtlr r1 ; \ + blr ; + +#define tlbentry(epn,sz,rpn,erpn,attr)\ + .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr) + + +/************************************************************************** + * TLB TABLE + * + * This table is used by the cpu boot code to setup the initial tlb + * entries. Rather than make broad assumptions in the cpu source tree, + * this table lets each board set things up however they like. + * + * Pointer to the table is returned in r1 + * + *************************************************************************/ + + .section .bootpg,"ax" + .globl tlbtab + +tlbtab: + tlbtab_start + tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I) + tlbentry( CFG_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_R|AC_W|SA_G|SA_I) + tlbentry( CFG_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I) + tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( CFG_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( CFG_PCI_BASE, SZ_256M, 0x00000000, 2, AC_R|AC_W|SA_G|SA_I ) + tlbentry( CFG_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_R|AC_W|SA_G|SA_I ) + tlbtab_end diff --git a/board/xpedite1k/u-boot.lds b/board/xpedite1k/u-boot.lds new file mode 100644 index 0000000..3f964c8 --- /dev/null +++ b/board/xpedite1k/u-boot.lds @@ -0,0 +1,155 @@ +/* + * (C) Copyright 2002-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + .bootpg 0xFFFFF000 : + { + cpu/ppc4xx/start.o (.bootpg) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + board/xpedite1k/init.o (.text) + cpu/ppc4xx/kgdb.o (.text) + cpu/ppc4xx/traps.o (.text) + cpu/ppc4xx/interrupts.o (.text) + cpu/ppc4xx/serial.o (.text) + cpu/ppc4xx/cpu_init.o (.text) + cpu/ppc4xx/speed.o (.text) + cpu/ppc4xx/405gp_enet.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/extable.o (.text) + lib_generic/zlib.o (.text) + +/* . = env_offset;*/ +/* common/environment.o(.text)*/ + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/xpedite1k/u-boot.lds.debug b/board/xpedite1k/u-boot.lds.debug new file mode 100644 index 0000000..3530c98 --- /dev/null +++ b/board/xpedite1k/u-boot.lds.debug @@ -0,0 +1,144 @@ +/* + * (C) Copyright 2002-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + /* WARNING - the following is hand-optimized to fit within */ + /* the sector layout of our flash chips! XXX FIXME XXX */ + + cpu/ppc4xx/start.o (.text) + board/xpedite1k/init.o (.text) + cpu/ppc4xx/kgdb.o (.text) + cpu/ppc4xx/traps.o (.text) + cpu/ppc4xx/interrupts.o (.text) + cpu/ppc4xx/serial.o (.text) + cpu/ppc4xx/cpu_init.o (.text) + cpu/ppc4xx/speed.o (.text) + cpu/ppc4xx/405gp_enet.o (.text) + common/dlmalloc.o (.text) + lib_generic/crc32.o (.text) + lib_ppc/extable.o (.text) + lib_generic/zlib.o (.text) + +/* common/environment.o(.text) */ + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x0FFF) & 0xFFFFF000; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/xpedite1k/xpedite1k.c b/board/xpedite1k/xpedite1k.c new file mode 100644 index 0000000..c025c85 --- /dev/null +++ b/board/xpedite1k/xpedite1k.c @@ -0,0 +1,358 @@ +/* + * Copyright (C) 2003 Travis B. Sawyer <travis.sawyer@sandburst.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include <common.h> +#include <asm/processor.h> +#include <spd_sdram.h> +#include <i2c.h> + +#define BOOT_SMALL_FLASH 32 /* 00100000 */ +#define FLASH_ONBD_N 2 /* 00000010 */ +#define FLASH_SRAM_SEL 1 /* 00000001 */ + +long int fixed_sdram (void); + +int board_pre_init (void) +{ + unsigned long sdrreg; + /* TBS: Setup the GPIO access for the user LEDs */ + mfsdr(sdr_pfc0, sdrreg); + mtsdr(sdr_pfc0, (sdrreg & ~0x00000100) | 0x00000E00); + out32(CFG_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3)); + LED0_OFF(); + LED1_OFF(); + LED2_OFF(); + LED3_OFF(); + + /*-------------------------------------------------------------------- + * Setup the external bus controller/chip selects + *-------------------------------------------------------------------*/ + + /* set the bus controller */ + mtebc (pb0ap, 0x04055200); /* FLASH/SRAM */ + mtebc (pb0cr, 0xfff18000); /* BAS=0xfff 1MB R/W 8-bit */ + + /*-------------------------------------------------------------------- + * Setup the interrupt controller polarities, triggers, etc. + *-------------------------------------------------------------------*/ + mtdcr (uic0sr, 0xffffffff); /* clear all */ + mtdcr (uic0er, 0x00000000); /* disable all */ + mtdcr (uic0cr, 0x00000003); /* SMI & UIC1 crit are critical */ + mtdcr (uic0pr, 0xfffffe00); /* per ref-board manual */ + mtdcr (uic0tr, 0x01c00000); /* per ref-board manual */ + mtdcr (uic0vr, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (uic0sr, 0xffffffff); /* clear all */ + + mtdcr (uic1sr, 0xffffffff); /* clear all */ + mtdcr (uic1er, 0x00000000); /* disable all */ + mtdcr (uic1cr, 0x00000000); /* all non-critical */ + mtdcr (uic1pr, 0xffffc0ff); /* per ref-board manual */ + mtdcr (uic1tr, 0x00ff8000); /* per ref-board manual */ + mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (uic1sr, 0xffffffff); /* clear all */ + + mtdcr (uic2sr, 0xffffffff); /* clear all */ + mtdcr (uic2er, 0x00000000); /* disable all */ + mtdcr (uic2cr, 0x00000000); /* all non-critical */ + mtdcr (uic2pr, 0xffffffff); /* per ref-board manual */ + mtdcr (uic2tr, 0x00ff8c0f); /* per ref-board manual */ + mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (uic2sr, 0xffffffff); /* clear all */ + + mtdcr (uicb0sr, 0xfc000000); /* clear all */ + mtdcr (uicb0er, 0x00000000); /* disable all */ + mtdcr (uicb0cr, 0x00000000); /* all non-critical */ + mtdcr (uicb0pr, 0xfc000000); /* */ + mtdcr (uicb0tr, 0x00000000); /* */ + mtdcr (uicb0vr, 0x00000001); /* */ + + LED0_ON(); + + + return 0; +} + +int checkboard (void) +{ + sys_info_t sysinfo; + get_sys_info (&sysinfo); + + printf ("Board: XES XPedite1000 440GX\n"); + printf ("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000); + printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000); + printf ("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000); + printf ("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000); + printf ("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000); + + return (0); +} + + +long int initdram (int board_type) +{ + long dram_size = 0; + +#if defined(CONFIG_SPD_EEPROM) + dram_size = spd_sdram (0); +#else + dram_size = fixed_sdram (); +#endif + return dram_size; +} + + +#if defined(CFG_DRAM_TEST) +int testdram (void) +{ + uint *pstart = (uint *) 0x00000000; + uint *pend = (uint *) 0x08000000; + uint *p; + + for (p = pstart; p < pend; p++) + *p = 0xaaaaaaaa; + + for (p = pstart; p < pend; p++) { + if (*p != 0xaaaaaaaa) { + printf ("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + for (p = pstart; p < pend; p++) + *p = 0x55555555; + + for (p = pstart; p < pend; p++) { + if (*p != 0x55555555) { + printf ("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + return 0; +} +#endif + +#if !defined(CONFIG_SPD_EEPROM) +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + * + * Assumes: 128 MB, non-ECC, non-registered + * PLB @ 133 MHz + * + ************************************************************************/ +long int fixed_sdram (void) +{ + uint reg; + + /*-------------------------------------------------------------------- + * Setup some default + *------------------------------------------------------------------*/ + mtsdram (mem_uabba, 0x00000000); /* ubba=0 (default) */ + mtsdram (mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ + mtsdram (mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */ + mtsdram (mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */ + mtsdram (mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */ + + /*-------------------------------------------------------------------- + * Setup for board-specific specific mem + *------------------------------------------------------------------*/ + /* + * Following for CAS Latency = 2.5 @ 133 MHz PLB + */ + mtsdram (mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */ + mtsdram (mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */ + /* RA=10 RD=3 */ + mtsdram (mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */ + mtsdram (mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */ + mtsdram (mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */ + udelay (400); /* Delay 200 usecs (min) */ + + /*-------------------------------------------------------------------- + * Enable the controller, then wait for DCEN to complete + *------------------------------------------------------------------*/ + mtsdram (mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */ + for (;;) { + mfsdram (mem_mcsts, reg); + if (reg & 0x80000000) + break; + } + + return (128 * 1024 * 1024); /* 128 MB */ +} +#endif /* !defined(CONFIG_SPD_EEPROM) */ + + +/************************************************************************* + * pci_pre_init + * + * This routine is called just prior to registering the hose and gives + * the board the opportunity to check things. Returning a value of zero + * indicates that things are bad & PCI initialization should be aborted. + * + * Different boards may wish to customize the pci controller structure + * (add regions, override default access routines, etc) or perform + * certain pre-initialization actions. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +int pci_pre_init(struct pci_controller * hose ) +{ + unsigned long strap; + + /*--------------------------------------------------------------------------+ + * TBS: + * The xpedite1k is a PrPMC board, however for our purposes it is the host + *--------------------------------------------------------------------------*/ + strap = mfdcr(cpc0_strp1); + if( (strap & 0x00100000) == 0 ){ + printf("PCI: CPC0_STRP1[PAE] not set.\n"); + return 0; + } + + return 1; +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ + +/************************************************************************* + * pci_target_init + * + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) +void pci_target_init(struct pci_controller * hose ) +{ + DECLARE_GLOBAL_DATA_PTR; + + /*--------------------------------------------------------------------------+ + * Disable everything + *--------------------------------------------------------------------------*/ + out32r( PCIX0_PIM0SA, 0 ); /* disable */ + out32r( PCIX0_PIM1SA, 0 ); /* disable */ + out32r( PCIX0_PIM2SA, 0 ); /* disable */ + out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */ + + /*--------------------------------------------------------------------------+ + * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping + * options to not support sizes such as 128/256 MB. + *--------------------------------------------------------------------------*/ + out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE ); + out32r( PCIX0_PIM0LAH, 0 ); + out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); + + out32r( PCIX0_BAR0, 0 ); + + /*--------------------------------------------------------------------------+ + * Program the board's subsystem id/vendor id + *--------------------------------------------------------------------------*/ + out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID ); + out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID ); + + out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY ); +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ + + +/************************************************************************* + * is_pci_host + * + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. + * + * Rather than hard-code a bad assumption in the general 440 code, the + * 440 pci code requires the board to decide at runtime. + * + * Return 0 for adapter mode, non-zero for host (monarch) mode. + * + * + ************************************************************************/ +#if defined(CONFIG_PCI) +int is_pci_host(struct pci_controller *hose) +{ + /* The ebony board is always configured as host. */ + /* TBS: The xpedite1k is not necessarily the host, however for our purposes, it is. */ + return(1); +} +#endif /* defined(CONFIG_PCI) */ + +#ifdef CONFIG_POST +/* + * Returns 1 if keys pressed to start the power-on long-running tests + * Called from board_init_f(). + */ +int post_hotkeys_pressed(void) +{ + + return (ctrlc()); +} + +void post_word_store (ulong a) +{ + volatile ulong *save_addr = + (volatile ulong *)(CFG_POST_WORD_ADDR); + + *save_addr = a; +} + +ulong post_word_load (void) +{ + volatile ulong *save_addr = + (volatile ulong *)(CFG_POST_WORD_ADDR); + + return *save_addr; +} +#endif + +/*----------------------------------------------------------------------------- + * board_get_enetaddr -- Read the MAC Addresses in the I2C EEPROM + *----------------------------------------------------------------------------- + */ +static int enetaddr_num = 0; +void board_get_enetaddr (uchar * enet) +{ + int i; + unsigned char buff[0x100], *cp; + + /* Initialize I2C */ + i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); + + /* Read 256 bytes in EEPROM */ + i2c_read (0x50, 0, 1, buff, 0x100); + + if (enetaddr_num == 0) { + cp = &buff[0xF4]; + enetaddr_num = 1; + } + else + cp = &buff[0xFA]; + + for (i = 0; i < 6; i++,cp++) + enet[i] = *cp; + + printf ("MAC address = %02x:%02x:%02x:%02x:%02x:%02x\n", + enet[0], enet[1], enet[2], enet[3], enet[4], enet[5]); + +} |