summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/solidrun/mx6cuboxi/mx6cuboxi.c29
1 files changed, 28 insertions, 1 deletions
diff --git a/board/solidrun/mx6cuboxi/mx6cuboxi.c b/board/solidrun/mx6cuboxi/mx6cuboxi.c
index 9aa0259..e83d2fe 100644
--- a/board/solidrun/mx6cuboxi/mx6cuboxi.c
+++ b/board/solidrun/mx6cuboxi/mx6cuboxi.c
@@ -25,6 +25,7 @@
#include <asm/imx-common/video.h>
#include <mmc.h>
#include <fsl_esdhc.h>
+#include <malloc.h>
#include <miiphy.h>
#include <netdev.h>
#include <asm/arch/crm_regs.h>
@@ -152,9 +153,14 @@ int board_phy_config(struct phy_device *phydev)
return 0;
}
+/* On Cuboxi Ethernet PHY can be located at addresses 0x0 or 0x4 */
+#define ETH_PHY_MASK ((1 << 0x0) | (1 << 0x4))
+
int board_eth_init(bd_t *bis)
{
struct iomuxc *const iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR;
+ struct mii_dev *bus;
+ struct phy_device *phydev;
int ret = enable_fec_anatop_clock(ENET_25MHZ);
if (ret)
@@ -165,7 +171,28 @@ int board_eth_init(bd_t *bis)
setup_iomux_enet();
- return cpu_eth_init(bis);
+ bus = fec_get_miibus(IMX_FEC_BASE, -1);
+ if (!bus)
+ return -EINVAL;
+
+ phydev = phy_find_by_mask(bus, ETH_PHY_MASK, PHY_INTERFACE_MODE_RGMII);
+ if (!phydev) {
+ ret = -EINVAL;
+ goto free_bus;
+ }
+
+ debug("using phy at address %d\n", phydev->addr);
+ ret = fec_probe(bis, -1, IMX_FEC_BASE, bus, phydev);
+ if (ret)
+ goto free_phydev;
+
+ return 0;
+
+free_phydev:
+ free(phydev);
+free_bus:
+ free(bus);
+ return ret;
}
#ifdef CONFIG_VIDEO_IPUV3