summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/esd/cms700/Kconfig12
-rw-r--r--board/esd/cms700/MAINTAINERS6
-rw-r--r--board/esd/cms700/Makefile16
-rw-r--r--board/esd/cms700/cms700.c192
-rw-r--r--board/esd/cms700/flash.c85
5 files changed, 0 insertions, 311 deletions
diff --git a/board/esd/cms700/Kconfig b/board/esd/cms700/Kconfig
deleted file mode 100644
index da11bc0..0000000
--- a/board/esd/cms700/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_CMS700
-
-config SYS_BOARD
- default "cms700"
-
-config SYS_VENDOR
- default "esd"
-
-config SYS_CONFIG_NAME
- default "CMS700"
-
-endif
diff --git a/board/esd/cms700/MAINTAINERS b/board/esd/cms700/MAINTAINERS
deleted file mode 100644
index 0191c8b..0000000
--- a/board/esd/cms700/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-CMS700 BOARD
-M: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-S: Maintained
-F: board/esd/cms700/
-F: include/configs/CMS700.h
-F: configs/CMS700_defconfig
diff --git a/board/esd/cms700/Makefile b/board/esd/cms700/Makefile
deleted file mode 100644
index 2bf5006..0000000
--- a/board/esd/cms700/Makefile
+++ /dev/null
@@ -1,16 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-# Objects for Xilinx JTAG programming (CPLD)
-CPLD = ../common/xilinx_jtag/lenval.o \
- ../common/xilinx_jtag/micro.o \
- ../common/xilinx_jtag/ports.o
-
-obj-y = cms700.o flash.o \
- ../common/misc.o \
- $(CPLD) \
- ../common/esd405ep_nand.o \
diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c
deleted file mode 100644
index 40d7621..0000000
--- a/board/esd/cms700/cms700.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * (C) Copyright 2005-2007
- * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <command.h>
-#include <malloc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void lxt971_no_sleep(void);
-
-int board_early_init_f (void)
-{
- /*
- * IRQ 0-15 405GP internally generated; active high; level sensitive
- * IRQ 16 405GP internally generated; active low; level sensitive
- * IRQ 17-24 RESERVED
- * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
- * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
- * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
- * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
- * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
- * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
- * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
- */
- mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
- mtdcr(UIC0ER, 0x00000000); /* disable all ints */
- mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
- mtdcr(UIC0PR, 0xFFFFFF80); /* set int polarities */
- mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
- mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/
- mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
-
- /*
- * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
- */
- mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
-
- /*
- * Reset CPLD via GPIO12 (CS3) pin
- */
- out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_PLD_RESET);
- udelay(1000); /* wait 1ms */
- out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_PLD_RESET);
- udelay(1000); /* wait 1ms */
-
- return 0;
-}
-
-int misc_init_r (void)
-{
- /* adjust flash start and offset */
- gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
- gd->bd->bi_flashoffset = 0;
-
- /*
- * Setup and enable EEPROM write protection
- */
- out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
-
- return (0);
-}
-
-
-/*
- * Check Board Identity:
- */
-#define LED_REG (CONFIG_SYS_PLD_BASE + 0x1000)
-int checkboard (void)
-{
- char str[64];
- int flashcnt;
- int delay;
-
- puts ("Board: ");
-
- if (getenv_f("serial#", str, sizeof(str)) == -1) {
- puts ("### No HW ID - assuming CMS700");
- } else {
- puts(str);
- }
-
- printf(" (PLD-Version=%02d)\n",
- in_8((void *)(CONFIG_SYS_PLD_BASE + 0x1001)));
-
- /*
- * Flash LEDs
- */
- for (flashcnt = 0; flashcnt < 3; flashcnt++) {
- out_8((void *)LED_REG, 0x00); /* LEDs off */
- for (delay = 0; delay < 100; delay++)
- udelay(1000);
- out_8((void *)LED_REG, 0x0f); /* LEDs on */
- for (delay = 0; delay < 50; delay++)
- udelay(1000);
- }
- out_8((void *)LED_REG, 0x70);
-
- return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_SYS_EEPROM_WREN)
-/* Input: <dev_addr> I2C address of EEPROM device to enable.
- * <state> -1: deliver current state
- * 0: disable write
- * 1: enable write
- * Returns: -1: wrong device address
- * 0: dis-/en- able done
- * 0/1: current state if <state> was -1.
- */
-int eeprom_write_enable (unsigned dev_addr, int state)
-{
- if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) {
- return -1;
- } else {
- switch (state) {
- case 1:
- /* Enable write access, clear bit GPIO_SINT2. */
- out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
- state = 0;
- break;
- case 0:
- /* Disable write access, set bit GPIO_SINT2. */
- out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
- state = 0;
- break;
- default:
- /* Read current status back. */
- state = (0 == (in_be32((void *)GPIO0_OR) & CONFIG_SYS_EEPROM_WP));
- break;
- }
- }
- return state;
-}
-
-int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- int query = argc == 1;
- int state = 0;
-
- if (query) {
- /* Query write access state. */
- state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, -1);
- if (state < 0) {
- puts ("Query of write access state failed.\n");
- } else {
- printf ("Write access for device 0x%0x is %sabled.\n",
- CONFIG_SYS_I2C_EEPROM_ADDR, state ? "en" : "dis");
- state = 0;
- }
- } else {
- if ('0' == argv[1][0]) {
- /* Disable write access. */
- state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 0);
- } else {
- /* Enable write access. */
- state = eeprom_write_enable (CONFIG_SYS_I2C_EEPROM_ADDR, 1);
- }
- if (state < 0) {
- puts ("Setup of write access state failed.\n");
- }
- }
-
- return state;
-}
-
-U_BOOT_CMD(eepwren, 2, 0, do_eep_wren,
- "Enable / disable / query EEPROM write access",
- ""
-);
-#endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */
-
-/* ------------------------------------------------------------------------- */
-
-void reset_phy(void)
-{
-#ifdef CONFIG_LXT971_NO_SLEEP
-
- /*
- * Disable sleep mode in LXT971
- */
- lxt971_no_sleep();
-#endif
-}
diff --git a/board/esd/cms700/flash.c b/board/esd/cms700/flash.c
deleted file mode 100644
index 23e8164..0000000
--- a/board/esd/cms700/flash.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-
-/*
- * include common flash code (for esd boards)
- */
-#include "../common/flash.c"
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long * addr, flash_info_t * info);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- unsigned long size_b0;
- int i;
- uint pbcr;
- unsigned long base_b0;
- int size_val = 0;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0<<20);
- }
-
- /* Setup offsets */
- flash_get_offsets (-size_b0, &flash_info[0]);
-
- /* Re-do sizing to get full correct info */
- mtdcr(EBC0_CFGADDR, PB0CR);
- pbcr = mfdcr(EBC0_CFGDATA);
- mtdcr(EBC0_CFGADDR, PB0CR);
- base_b0 = -size_b0;
- switch (size_b0) {
- case 1 << 20:
- size_val = 0;
- break;
- case 2 << 20:
- size_val = 1;
- break;
- case 4 << 20:
- size_val = 2;
- break;
- case 8 << 20:
- size_val = 3;
- break;
- case 16 << 20:
- size_val = 4;
- break;
- }
- pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
- mtdcr(EBC0_CFGDATA, pbcr);
-
- /* Monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET,
- -CONFIG_SYS_MONITOR_LEN,
- 0xffffffff,
- &flash_info[0]);
-
- flash_info[0].size = size_b0;
-
- return (size_b0);
-}
generated by cgit v1.1 at 2024-12-18 10:22:53 +0000