summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/BuS/eb_cpu5282/Makefile2
-rw-r--r--board/BuS/eb_cpu5282/cfm_flash.c212
-rw-r--r--board/BuS/eb_cpu5282/cfm_flash.h40
-rw-r--r--board/BuS/eb_cpu5282/eb_cpu5282.c110
-rw-r--r--board/BuS/eb_cpu5282/flash.c415
-rw-r--r--board/Marvell/db64360/db64360.c10
-rw-r--r--board/Marvell/db64460/db64460.c10
-rw-r--r--board/a3m071/Makefile (renamed from board/BuS/eb_cpu5282/config.mk)33
-rw-r--r--board/a3m071/README80
-rw-r--r--board/a3m071/a3m071.c335
-rw-r--r--board/a3m071/mt46v16m16-75.h (renamed from board/chromebook-x86/coreboot/coreboot_pci.c)32
-rw-r--r--board/chromebook-x86/coreboot/Makefile3
-rw-r--r--board/chromebook-x86/coreboot/config.mk37
-rw-r--r--board/chromebook-x86/coreboot/coreboot.c87
-rw-r--r--board/chromebook-x86/coreboot/coreboot_start16.S46
-rw-r--r--board/chromebook-x86/dts/alex.dts24
-rw-r--r--board/chromebook-x86/dts/link.dts24
-rw-r--r--board/davedenx/qong/qong.c12
-rw-r--r--board/esd/cpci750/cpci750.c10
-rw-r--r--board/esd/pmc440/cmd_pmc440.c2
-rw-r--r--board/exmeritus/hww1u1a/hww1u1a.c2
-rw-r--r--board/freescale/common/Makefile2
-rw-r--r--board/freescale/common/ngpixis.h2
-rw-r--r--board/freescale/corenet_ds/Makefile2
-rw-r--r--board/freescale/corenet_ds/corenet_ds.c22
-rw-r--r--board/freescale/corenet_ds/ddr.c4
-rw-r--r--board/freescale/corenet_ds/eth_superhydra.c722
-rw-r--r--board/freescale/corenet_ds/p5040ds_ddr.c18
-rw-r--r--board/freescale/mpc8540ads/mpc8540ads.c2
-rw-r--r--board/freescale/mpc8560ads/mpc8560ads.c2
-rw-r--r--board/freescale/mpc8569mds/mpc8569mds.c2
-rw-r--r--board/freescale/mx31pdk/mx31pdk.c12
-rw-r--r--board/freescale/mx35pdk/mx35pdk.c14
-rw-r--r--board/freescale/mx51evk/Makefile4
-rw-r--r--board/freescale/mx51evk/mx51evk.c69
-rw-r--r--board/freescale/mx51evk/mx51evk_video.c81
-rw-r--r--board/freescale/mx53evk/mx53evk.c12
-rw-r--r--board/freescale/mx53loco/Makefile4
-rw-r--r--board/freescale/mx53loco/mx53loco.c87
-rw-r--r--board/freescale/mx53loco/mx53loco_video.c94
-rw-r--r--board/freescale/p1023rds/p1023rds.c2
-rw-r--r--board/freescale/p1_p2_rdb_pc/Makefile16
-rw-r--r--board/freescale/p1_p2_rdb_pc/ddr.c2
-rw-r--r--board/freescale/p1_p2_rdb_pc/law.c2
-rw-r--r--board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c2
-rw-r--r--board/freescale/p1_p2_rdb_pc/spl_minimal.c136
-rw-r--r--board/freescale/p1_p2_rdb_pc/tlb.c22
-rw-r--r--board/freescale/p2020ds/p2020ds.c2
-rw-r--r--board/genesi/mx51_efikamx/efikamx.c12
-rw-r--r--board/gw8260/gw8260.c10
-rw-r--r--board/hale/tt01/tt01.c14
-rw-r--r--board/iomega/iconnect/iconnect.c2
-rw-r--r--board/iomega/iconnect/iconnect.h2
-rw-r--r--board/iomega/iconnect/kwbimage.cfg2
-rw-r--r--board/logicpd/am3517evm/am3517evm.c74
-rw-r--r--board/prodrive/p3mx/p3mx.c10
-rw-r--r--board/raidsonic/ib62x0/ib62x0.c2
-rw-r--r--board/raidsonic/ib62x0/ib62x0.h2
-rw-r--r--board/raidsonic/ib62x0/kwbimage.cfg2
-rw-r--r--board/samsung/goni/goni.c22
-rw-r--r--board/samsung/trats/trats.c292
-rw-r--r--board/samsung/universal_c210/universal.c37
-rw-r--r--board/sbc8548/ddr.c2
-rw-r--r--board/socrates/sdram.c2
-rw-r--r--board/ti/am335x/board.c23
-rw-r--r--board/ti/beagle/beagle.c43
-rw-r--r--board/ttcontrol/vision2/vision2.c12
67 files changed, 2330 insertions, 1100 deletions
diff --git a/board/BuS/eb_cpu5282/Makefile b/board/BuS/eb_cpu5282/Makefile
index 0f14699..ac860c1 100644
--- a/board/BuS/eb_cpu5282/Makefile
+++ b/board/BuS/eb_cpu5282/Makefile
@@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
-COBJS = $(BOARD).o cfm_flash.o flash.o
+COBJS = $(BOARD).o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/BuS/eb_cpu5282/cfm_flash.c b/board/BuS/eb_cpu5282/cfm_flash.c
deleted file mode 100644
index fe03b17..0000000
--- a/board/BuS/eb_cpu5282/cfm_flash.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/*
- * Basic Flash Driver for Freescale MCF 5281/5282 internal FLASH
- *
- * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/m5282.h>
-#include "cfm_flash.h"
-
-#if defined(CONFIG_M5281) || defined(CONFIG_M5282)
-
-#if (CONFIG_SYS_CLK>20000000)
- #define CFM_CLK (((long) CONFIG_SYS_CLK / (400000 * 8) + 1) | 0x40)
-#else
- #define CFM_CLK ((long) CONFIG_SYS_CLK / 400000 + 1)
-#endif
-
-#define cmf_backdoor_address(addr) (((addr) & 0x0007FFFF) | 0x04000000 | \
- (CONFIG_SYS_MBAR & 0xC0000000))
-
-void cfm_flash_print_info (flash_info_t * info)
-{
- printf ("Freescale: ");
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FREESCALE_ID_MCF5281 & FLASH_TYPEMASK:
- printf ("MCF5281 internal FLASH\n");
- break;
- case FREESCALE_ID_MCF5282 & FLASH_TYPEMASK:
- printf ("MCF5282 internal FLASH\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
-}
-
-void cfm_flash_init (flash_info_t * info)
-{
- int sector;
- ulong protection;
- MCFCFM_MCR = 0;
- MCFCFM_CLKD = CFM_CLK;
- debug ("CFM Clock divider: %ld (%d Hz @ %ld Hz)\n",CFM_CLK,\
- CONFIG_SYS_CLK / (2* ((CFM_CLK & 0x3F)+1) * (1+((CFM_CLK & 0x40)>>6)*7)),\
- CONFIG_SYS_CLK);
- MCFCFM_SACC = 0;
- MCFCFM_DACC = 0;
-
- if (MCFCFM_SEC & MCFCFM_SEC_KEYEN)
- puts("CFM backdoor access is enabled\n");
- if (MCFCFM_SEC & MCFCFM_SEC_SECSTAT)
- puts("CFM securety is enabled\n");
-
- #ifdef CONFIG_M5281
- info->flash_id = (FREESCALE_MANUFACT & FLASH_VENDMASK) |
- (FREESCALE_ID_MCF5281 & FLASH_TYPEMASK);
- info->size = 256*1024;
- info->sector_count = 16;
- #else
- info->flash_id = (FREESCALE_MANUFACT & FLASH_VENDMASK) |
- (FREESCALE_ID_MCF5282 & FLASH_TYPEMASK);
- info->size = 512*1024;
- info->sector_count = 32;
- #endif
- protection = MCFCFM_PROT;
- for (sector = 0; sector < info->sector_count; sector++)
- {
- if (sector == 0)
- {
- info->start[sector] = CONFIG_SYS_INT_FLASH_BASE;
- }
- else
- {
- info->start[sector] = info->start[sector-1] + 0x04000;
- }
- info->protect[sector] = protection & 1;
- protection >>= 1;
- }
-}
-
-int cfm_flash_readycheck(int checkblank)
-{
- int rc;
- unsigned char state;
-
- rc = ERR_OK;
- while (!(MCFCFM_USTAT & MCFCFM_USTAT_CCIF));
- state = MCFCFM_USTAT;
- if (state & MCFCFM_USTAT_ACCERR)
- {
- debug ("%s(): CFM access error",__FUNCTION__);
- rc = ERR_PROG_ERROR;
- }
- if (state & MCFCFM_USTAT_PVIOL)
- {
- debug ("%s(): CFM protection violation",__FUNCTION__);
- rc = ERR_PROTECTED;
- }
- if (checkblank)
- {
- if (!(state & MCFCFM_USTAT_BLANK))
- {
- debug ("%s(): CFM erras error",__FUNCTION__);
- rc = ERR_NOT_ERASED;
- }
- }
- MCFCFM_USTAT = state & 0x34; /* reset state */
- return rc;
-}
-
-/* Erase 16KiB = 8 2KiB pages */
-
-int cfm_flash_erase_sector (flash_info_t * info, int sector)
-{
- ulong address;
- int page;
- int rc;
- rc= ERR_OK;
- address = cmf_backdoor_address(info->start[sector]);
- for (page=0; (page<8) && (rc==ERR_OK); page++)
- {
- *(volatile __u32*) address = 0;
- MCFCFM_CMD = MCFCFM_CMD_PGERS;
- MCFCFM_USTAT = MCFCFM_USTAT_CBEIF;
- rc = cfm_flash_readycheck(0);
- if (rc==ERR_OK)
- {
- *(volatile __u32*) address = 0;
- MCFCFM_CMD = MCFCFM_CMD_PGERSVER;
- MCFCFM_USTAT = MCFCFM_USTAT_CBEIF;
- rc = cfm_flash_readycheck(1);
- }
- address += 0x800;
- }
- return rc;
-}
-
-int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- int rc;
- ulong dest, data;
-
- rc = ERR_OK;
- if (addr & 3)
- {
- debug ("Byte and Word alignment not supported\n");
- rc = ERR_ALIGN;
- }
- if (cnt & 3)
- {
- debug ("Byte and Word transfer not supported\n");
- rc = ERR_ALIGN;
- }
- dest = cmf_backdoor_address(addr);
- while ((cnt>=4) && (rc == ERR_OK))
- {
- data = *((volatile u32 *) src);
- *(volatile u32*) dest = data;
- MCFCFM_CMD = MCFCFM_CMD_PGM;
- MCFCFM_USTAT = MCFCFM_USTAT_CBEIF;
- rc = cfm_flash_readycheck(0);
- if (*(volatile u32*) addr != data) rc = ERR_PROG_ERROR;
- src +=4;
- dest +=4;
- addr +=4;
- cnt -=4;
- }
- return rc;
-}
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-
-int cfm_flash_protect(flash_info_t * info,long sector,int prot)
-{
- int rc;
-
- rc= ERR_OK;
- if (prot)
- {
- MCFCFM_PROT |= (1<<sector);
- info->protect[sector]=1;
- }
- else
- {
- MCFCFM_PROT &= ~(1<<sector);
- info->protect[sector]=0;
- }
- return rc;
-}
-
-#endif
-
-#endif
diff --git a/board/BuS/eb_cpu5282/cfm_flash.h b/board/BuS/eb_cpu5282/cfm_flash.h
deleted file mode 100644
index ed4e794..0000000
--- a/board/BuS/eb_cpu5282/cfm_flash.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * Basic Flash Driver for Freescale MCF 5282 internal FLASH
- *
- * (C) Copyright 2005 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CFM_FLASH_H_
-#define __CFM_FLASH_H_
-
-#define FREESCALE_MANUFACT 0xFACFFACF
-#define FREESCALE_ID_MCF5281 0x5281
-#define FREESCALE_ID_MCF5282 0x5282
-
-extern void cfm_flash_print_info (flash_info_t * info);
-extern int cfm_flash_erase_sector (flash_info_t * info, int sector);
-extern void cfm_flash_init (flash_info_t * info);
-extern int cfm_flash_write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt);
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-extern int cfm_flash_protect(flash_info_t * info,long sector,int prot);
-#endif
-
-#endif
diff --git a/board/BuS/eb_cpu5282/eb_cpu5282.c b/board/BuS/eb_cpu5282/eb_cpu5282.c
index d64ad1b..f73431e 100644
--- a/board/BuS/eb_cpu5282/eb_cpu5282.c
+++ b/board/BuS/eb_cpu5282/eb_cpu5282.c
@@ -35,18 +35,19 @@
DECLARE_GLOBAL_DATA_PTR;
+#ifdef CONFIG_VIDEO
unsigned long display_width;
unsigned long display_height;
+#endif
/*---------------------------------------------------------------------------*/
int checkboard (void)
{
- puts ("Board: MCF-EV1 + MCF-EV23 (BuS Elektronik GmbH & Co. KG)\n");
+ puts("Board: EB+CPU5282 (BuS Elektronik GmbH & Co. KG)\n");
#if (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
- puts (" Boot from Internal FLASH\n");
+ puts(" Boot from Internal FLASH\n");
#endif
-
return 0;
}
@@ -55,29 +56,39 @@ phys_size_t initdram (int board_type)
int size, i;
size = 0;
- MCFSDRAMC_DCR = MCFSDRAMC_DCR_RTIM_6
- | MCFSDRAMC_DCR_RC ((15 * CONFIG_SYS_CLK) >> 4);
+ MCFSDRAMC_DCR = MCFSDRAMC_DCR_RTIM_6 |
+ MCFSDRAMC_DCR_RC((15 * CONFIG_SYS_CLK / 1000000) >> 4);
+ asm (" nop");
#ifdef CONFIG_SYS_SDRAM_BASE0
-
- MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE (CONFIG_SYS_SDRAM_BASE0)
- | MCFSDRAMC_DACR_CASL (1)
- | MCFSDRAMC_DACR_CBM (3)
- | MCFSDRAMC_DACR_PS_16;
+ MCFSDRAMC_DACR0 = MCFSDRAMC_DACR_BASE(CONFIG_SYS_SDRAM_BASE0)|
+ MCFSDRAMC_DACR_CASL(1) | MCFSDRAMC_DACR_CBM(3) |
+ MCFSDRAMC_DACR_PS_32;
+ asm (" nop");
MCFSDRAMC_DMR0 = MCFSDRAMC_DMR_BAM_16M | MCFSDRAMC_DMR_V;
+ asm (" nop");
MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IP;
+ asm (" nop");
+ for (i = 0; i < 10; i++)
+ asm (" nop");
- *(unsigned short *) (CONFIG_SYS_SDRAM_BASE0) = 0xA5A5;
+ *(unsigned long *)(CONFIG_SYS_SDRAM_BASE0) = 0xA5A5A5A5;
+ asm (" nop");
MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_RE;
+ asm (" nop");
+
for (i = 0; i < 2000; i++)
asm (" nop");
- mbar_writeLong (MCFSDRAMC_DACR0,
- mbar_readLong (MCFSDRAMC_DACR0) | MCFSDRAMC_DACR_IMRS);
- *(unsigned int *) (CONFIG_SYS_SDRAM_BASE0 + 0x220) = 0xA5A5;
- size += CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+
+ MCFSDRAMC_DACR0 |= MCFSDRAMC_DACR_IMRS;
+ asm (" nop");
+ /* write SDRAM mode register */
+ *(unsigned long *)(CONFIG_SYS_SDRAM_BASE0 + 0x80440) = 0xA5A5A5A5;
+ asm (" nop");
+ size += CONFIG_SYS_SDRAM_SIZE0 * 1024 * 1024;
#endif
-#ifdef CONFIG_SYS_SDRAM_BASE1
+#ifdef CONFIG_SYS_SDRAM_BASE1xx
MCFSDRAMC_DACR1 = MCFSDRAMC_DACR_BASE (CONFIG_SYS_SDRAM_BASE1)
| MCFSDRAMC_DACR_CASL (1)
| MCFSDRAMC_DACR_CBM (3)
@@ -134,38 +145,74 @@ int testdram (void)
}
#endif
+#if defined(CONFIG_HW_WATCHDOG)
+
+void hw_watchdog_init(void)
+{
+ char *s;
+ int enable;
+
+ enable = 1;
+ s = getenv("watchdog");
+ if (s != NULL)
+ if ((strncmp(s, "off", 3) == 0) || (strncmp(s, "0", 1) == 0))
+ enable = 0;
+ if (enable)
+ MCFGPTA_GPTDDR |= (1<<2);
+ else
+ MCFGPTA_GPTDDR &= ~(1<<2);
+}
+
+void hw_watchdog_reset(void)
+{
+ MCFGPTA_GPTPORT ^= (1<<2);
+}
+#endif
+
int misc_init_r(void)
{
#ifdef CONFIG_HW_WATCHDOG
hw_watchdog_init();
#endif
-#ifndef CONFIG_VIDEO
- vcxk_init(16, 16);
-#endif
return 1;
}
-#if defined(CONFIG_VIDEO)
+void __led_toggle(led_id_t mask)
+{
+ MCFGPTA_GPTPORT ^= (1 << 3);
+}
-/*
- ****h* EB+CPU5282-T1/drv_video_init
- * FUNCTION
- ***
- */
+void __led_init(led_id_t mask, int state)
+{
+ __led_set(mask, state);
+ MCFGPTA_GPTDDR |= (1 << 3);
+}
+
+void __led_set(led_id_t mask, int state)
+{
+ if (state == STATUS_LED_ON)
+ MCFGPTA_GPTPORT |= (1 << 3);
+ else
+ MCFGPTA_GPTPORT &= ~(1 << 3);
+}
+
+#if defined(CONFIG_VIDEO)
int drv_video_init(void)
{
char *s;
+#ifdef CONFIG_SPLASH_SCREEN
unsigned long splash;
-
+#endif
printf("Init Video as ");
-
- if ((s = getenv("displaywidth")) != NULL)
+ s = getenv("displaywidth");
+ if (s != NULL)
display_width = simple_strtoul(s, NULL, 10);
else
display_width = 256;
- if ((s = getenv("displayheight")) != NULL)
+ s = getenv("displayheight");
+ if (s != NULL)
display_height = simple_strtoul(s, NULL, 10);
else
display_height = 256;
@@ -178,10 +225,9 @@ int drv_video_init(void)
vcxk_init(display_width, display_height);
#ifdef CONFIG_SPLASH_SCREEN
- if ((s = getenv("splashimage")) != NULL) {
- debug("use splashimage: %s\n", s);
+ s = getenv("splashimage");
+ if (s != NULL) {
splash = simple_strtoul(s, NULL, 16);
- debug("use splashimage: %x\n", splash);
vcxk_acknowledge_wait();
video_display_bitmap(splash, 0, 0);
}
diff --git a/board/BuS/eb_cpu5282/flash.c b/board/BuS/eb_cpu5282/flash.c
deleted file mode 100644
index 8b7f957..0000000
--- a/board/BuS/eb_cpu5282/flash.c
+++ /dev/null
@@ -1,415 +0,0 @@
-/*
- * (C) Copyright 2005
- * BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
- *
- * Based On
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include "cfm_flash.h"
-
-#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE
-#define FLASH_BANK_SIZE 0x200000
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-void flash_print_info (flash_info_t * info)
-{
- int i;
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case (AMD_MANUFACT & FLASH_VENDMASK):
- printf ("AMD: ");
- switch (info->flash_id & FLASH_TYPEMASK) {
- case (AMD_ID_LV160B & FLASH_TYPEMASK):
- printf ("AM29LV160B (16Bit)\n");
- break;
- default:
- printf ("Unknown Chip Type\n");
- break;
- }
- break;
- case FREESCALE_MANUFACT & FLASH_VENDMASK:
- cfm_flash_print_info (info);
- break;
- default:
- printf ("Unknown Vendor ");
- break;
- }
-
- puts (" Size: ");
- if ((info->size >> 20) > 0)
- {
- printf ("%ld MiB",info->size >> 20);
- }
- else
- {
- printf ("%ld KiB",info->size >> 10);
- }
- printf (" in %d Sectors\n", info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++) {
- if ((i % 4) == 0) {
- printf ("\n ");
- }
- printf ("%02d: %08lX%s ", i,info->start[i],
- info->protect[i] ? " P" : " ");
- }
- printf ("\n\n");
-}
-
-unsigned long flash_init (void)
-{
- int i, j;
- ulong size = 0;
-
- for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
- ulong flashbase = 0;
-
- switch (i)
- {
- case 1:
- flash_info[i].flash_id =
- (AMD_MANUFACT & FLASH_VENDMASK) |
- (AMD_ID_LV160B & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
- flashbase = PHYS_FLASH_1;
- for (j = 0; j < flash_info[i].sector_count; j++) {
- if (j == 0) {
- /* 1st is 16 KiB */
- flash_info[i].start[j] = flashbase;
- }
- if ((j >= 1) && (j <= 2)) {
- /* 2nd and 3rd are 8 KiB */
- flash_info[i].start[j] =
- flashbase + 0x4000 + 0x2000 * (j - 1);
- }
- if (j == 3) {
- /* 4th is 32 KiB */
- flash_info[i].start[j] = flashbase + 0x8000;
- }
- if ((j >= 4) && (j <= 34)) {
- /* rest is 256 KiB */
- flash_info[i].start[j] =
- flashbase + 0x10000 + 0x10000 * (j - 4);
- }
- }
- break;
- case 0:
- cfm_flash_init (&flash_info[i]);
- break;
- default:
- panic ("configured to many flash banks!\n");
- }
-
- size += flash_info[i].size;
- }
-
- flash_protect (FLAG_PROTECT_SET,
- CONFIG_SYS_FLASH_BASE,
- CONFIG_SYS_FLASH_BASE + 0xffff, &flash_info[0]);
-
- return size;
-}
-
-#define CMD_READ_ARRAY 0x00F0
-#define CMD_UNLOCK1 0x00AA
-#define CMD_UNLOCK2 0x0055
-#define CMD_ERASE_SETUP 0x0080
-#define CMD_ERASE_CONFIRM 0x0030
-#define CMD_PROGRAM 0x00A0
-#define CMD_UNLOCK_BYPASS 0x0020
-
-#define MEM_FLASH_ADDR1 (*(volatile u16 *)(info->start[0] + (0x00000555<<1)))
-#define MEM_FLASH_ADDR2 (*(volatile u16 *)(info->start[0] + (0x000002AA<<1)))
-
-
-#define BIT_ERASE_DONE 0x0080
-#define BIT_RDY_MASK 0x0080
-#define BIT_PROGRAM_ERROR 0x0020
-#define BIT_TIMEOUT 0x80000000 /* our flag */
-
-#define ERR_READY -1
-
-int amd_flash_erase_sector(flash_info_t * info, int sector)
-{
- int state;
- ulong result;
- ulong start;
-
- volatile u16 *addr =
- (volatile u16 *) (info->start[sector]);
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- *addr = CMD_ERASE_CONFIRM;
-
- /* wait until flash is ready */
- state = 0;
- start = get_timer(0);
-
- do {
- result = *addr;
-
- /* check timeout */
- if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
- state = ERR_TIMOUT;
- }
-
- if (!state && (result & 0xFFFF) & BIT_ERASE_DONE)
- state = ERR_READY;
- }
- while (!state);
- if (state == ERR_READY)
- state = ERR_OK;
-
- MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-
- return state;
-}
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- int iflag, cflag;
- int sector;
- int rc;
-
- rc = ERR_OK;
-
- if (info->flash_id == FLASH_UNKNOWN)
- {
- rc = ERR_UNKNOWN_FLASH_TYPE;
- } /* (info->flash_id == FLASH_UNKNOWN) */
-
- if ((s_first < 0) || (s_first > s_last) || s_last >= info->sector_count)
- {
- rc = ERR_INVAL;
- }
-
- cflag = icache_status ();
- icache_disable ();
- iflag = disable_interrupts ();
-
- for (sector = s_first; (sector <= s_last) && (rc == ERR_OK); sector++) {
-
- if (info->protect[sector])
- {
- putc('P'); /* protected sector will not erase */
- }
- else
- {
- /* erase on unprotected sector */
- puts("E\b");
- switch (info->flash_id & FLASH_VENDMASK)
- {
- case (AMD_MANUFACT & FLASH_VENDMASK):
- rc = amd_flash_erase_sector(info,sector);
- break;
- case (FREESCALE_MANUFACT & FLASH_VENDMASK):
- rc = cfm_flash_erase_sector(info,sector);
- break;
- default:
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
- putc('.');
- }
- }
- if (rc!=ERR_OK)
- {
- printf ("\n ");
- flash_perror (rc);
- }
- else
- {
- printf (" done\n");
- }
-
- udelay (10000); /* allow flash to settle - wait 10 ms */
-
- if (iflag)
- enable_interrupts ();
-
- if (cflag)
- icache_enable ();
-
- return rc;
-}
-
-volatile static int amd_write_word (flash_info_t * info, ulong dest, u16 data)
-{
- volatile u16 *addr;
- ulong result;
- int cflag, iflag;
- int state;
- ulong start;
-
- /*
- * Check if Flash is (sufficiently) erased
- */
- addr = (volatile u16 *) dest;
-
- result = *addr;
- if ((result & data) != data)
- return ERR_NOT_ERASED;
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
-
- cflag = icache_status ();
- icache_disable ();
- iflag = disable_interrupts ();
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- MEM_FLASH_ADDR1 = CMD_PROGRAM;
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- start = get_timer(0);
-
- /* wait until flash is ready */
- state = 0;
- do {
- result = *addr;
-
- /* check timeout */
- if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- state = ERR_TIMOUT;
- }
- if (!state && ((result & BIT_RDY_MASK) == (data & BIT_RDY_MASK)))
- state = ERR_READY;
-
- } while (!state);
-
- *addr = CMD_READ_ARRAY;
-
- if (state == ERR_READY)
- state = ERR_OK;
- if ((*addr != data) && (state != ERR_TIMOUT))
- state = ERR_PROG_ERROR;
-
- if (iflag)
- enable_interrupts ();
-
- if (cflag)
- icache_enable ();
-
- return state;
-}
-
-int amd_flash_write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- int rc;
- ulong dest;
- u16 data;
-
- rc = ERR_OK;
- if (addr & 1)
- {
- debug ("Byte alignment not supported\n");
- rc = ERR_ALIGN;
- }
- if (cnt & 1)
- {
- debug ("Byte transfer not supported\n");
- rc = ERR_ALIGN;
- }
-
- dest = addr;
- while ((cnt>=2) && (rc == ERR_OK))
- {
- data = *((volatile u16 *) src);
- rc=amd_write_word (info,dest,data);
- src +=2;
- dest +=2;
- cnt -=2;
- }
- return rc;
-}
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- int rc;
-
- switch (info->flash_id & FLASH_VENDMASK)
- {
- case (AMD_MANUFACT & FLASH_VENDMASK):
- rc = amd_flash_write_buff(info,src,addr,cnt);
- break;
- case (FREESCALE_MANUFACT & FLASH_VENDMASK):
- rc = cfm_flash_write_buff(info,src,addr,cnt);
- break;
- default:
- rc = ERR_UNKNOWN_FLASH_VENDOR;
- }
- return rc;
-
-}
-int amd_flash_protect(flash_info_t * info,long sector,int prot)
-{
- int rc;
- rc= ERR_OK;
- if (prot)
- {
- info->protect[sector]=1;
- }
- else
- {
- info->protect[sector]=0;
- }
- return rc;
-}
-
-#ifdef CONFIG_SYS_FLASH_PROTECTION
-
-int flash_real_protect(flash_info_t * info,long sector,int prot)
-{
- int rc;
-
- switch (info->flash_id & FLASH_VENDMASK)
- {
- case (AMD_MANUFACT & FLASH_VENDMASK):
- rc = amd_flash_protect(info,sector,prot);
- break;
- case (FREESCALE_MANUFACT & FLASH_VENDMASK):
- rc = cfm_flash_protect(info,sector,prot);
- break;
- default:
- rc = ERR_UNKNOWN_FLASH_VENDOR;
- }
- return rc;
-}
-
-#endif
diff --git a/board/Marvell/db64360/db64360.c b/board/Marvell/db64360/db64360.c
index 6cae686..38769e0 100644
--- a/board/Marvell/db64360/db64360.c
+++ b/board/Marvell/db64360/db64360.c
@@ -834,15 +834,11 @@ int mem_test_walk (void)
/*********************************************************************/
int testdram (void)
{
- char *s;
int rundata, runaddress, runwalk;
- s = getenv ("testdramdata");
- rundata = (s && (*s == 'y')) ? 1 : 0;
- s = getenv ("testdramaddress");
- runaddress = (s && (*s == 'y')) ? 1 : 0;
- s = getenv ("testdramwalk");
- runwalk = (s && (*s == 'y')) ? 1 : 0;
+ rundata = getenv_yesno("testdramdata") == 1;
+ runaddress = getenv_yesno("testdramaddress") == 1;
+ runwalk = getenv_yesno("testdramwalk") == 1;
/* rundata = 1; */
/* runaddress = 0; */
diff --git a/board/Marvell/db64460/db64460.c b/board/Marvell/db64460/db64460.c
index d4f58b3..ddb7ed5 100644
--- a/board/Marvell/db64460/db64460.c
+++ b/board/Marvell/db64460/db64460.c
@@ -834,15 +834,11 @@ int mem_test_walk (void)
/*********************************************************************/
int testdram (void)
{
- char *s;
int rundata, runaddress, runwalk;
- s = getenv ("testdramdata");
- rundata = (s && (*s == 'y')) ? 1 : 0;
- s = getenv ("testdramaddress");
- runaddress = (s && (*s == 'y')) ? 1 : 0;
- s = getenv ("testdramwalk");
- runwalk = (s && (*s == 'y')) ? 1 : 0;
+ rundata = getenv_yesno("testdramdata") == 1;
+ runaddress = getenv_yesno("testdramaddress") == 1;
+ runwalk = getenv_yesno("testdramwalk") == 1;
/* rundata = 1; */
/* runaddress = 0; */
diff --git a/board/BuS/eb_cpu5282/config.mk b/board/a3m071/Makefile
index 18fb84e..6f961fb 100644
--- a/board/BuS/eb_cpu5282/config.mk
+++ b/board/a3m071/Makefile
@@ -1,8 +1,4 @@
#
-# (C) Copyright 2000-2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
-#
# See file CREDITS for list of people who contributed to this
# project.
#
@@ -16,12 +12,25 @@
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-ifndef CONFIG_SYS_TEXT_BASE
-CONFIG_SYS_TEXT_BASE = 0xFE000000
-endif
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := $(BOARD).o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/a3m071/README b/board/a3m071/README
new file mode 100644
index 0000000..7698614
--- /dev/null
+++ b/board/a3m071/README
@@ -0,0 +1,80 @@
+------------------------------------------------------------------------
+A3M071 board support
+------------------------------------------------------------------------
+
+
+SPL NOR flash support:
+----------------------
+To boot fast into the OS (Linux), this board port integrates the SPL
+framework. This means, that a special, stripped-down version of
+U-Boot runs in the beginning. In the case of the A3M071 board, this
+SPL U-Boot version is less than 16 KiB big. This SPL U-Boot can either
+boot the OS (Linux) or a "real", full-blown U-Boot. This detection
+on whether to boot Linux or U-Boot is done by using the "boot_os"
+environment variable. If "boot_os" is set to "yes", Linux will be
+loaded and booted from the SPL U-Boot version. Otherwise, the
+full-blown U-Boot version will be loaded and run.
+
+Enabling Linux booting:
+-----------------------
+From U-Boot:
+=> setenv boot_os yes
+=> saveenv
+
+From Linux:
+$ fw_setenv boot_os yes
+
+Enabling U-Boot booting:
+------------------------
+From U-Boot:
+=> setenv boot_os no
+=> saveenv
+
+From Linux:
+$ fw_setenv boot_os no
+
+
+Preparing Linux image(s) for booting from SPL U-Boot:
+-----------------------------------------------------
+To boot the Linux kernel from the SPL, the DT blob (fdt) needs to get
+prepard/patched first. U-Boot usually inserts some dynamic values into
+the DT binary (blob), e.g. autodetected memory size, MAC addresses,
+clocks speeds etc. To generate this patched DT blob, you can use
+the following command:
+
+1. Load fdt blob to SDRAM:
+=> tftp 1800000 a3m071/a3m071.dtb
+
+2. Set bootargs as desired for Linux booting (e.g. flash_mtd):
+=> run mtdargs addip2 addtty
+
+3. Use "fdt" commands to patch the DT blob:
+=> fdt addr 1800000
+=> fdt boardsetup
+=> fdt chosen
+
+4. Display patched DT blob (optional):
+=> fdt print
+
+5. Save fdt to NOR flash:
+=> erase fc060000 fc07ffff
+=> cp.b 1800000 fc060000 10000
+
+All this can be integrated into an environment command:
+=> setenv upd_fdt 'tftp 1800000 a3m071/a3m071.dtb;run mtdargs addip2 addtty; \
+ fdt addr 1800000;fdt boardsetup;erase fc060000 fc07ffff; \
+ cp.b 1800000 fc060000 10000'
+=> saveenv
+
+After this, only "run upd_fdt" needs to get called to load, patch
+and save the DT blob into NOR flash.
+
+Additionally, the Linux kernel image has to be saved uncompressed in
+its uImage file (and not gzip compressed). This can be done with this
+command:
+
+$ mkimage -A ppc -O linux -T kernel -C none -a 0 -e 0 \
+ -n "Linux Kernel Image" -d vmlinux.bin uImage.uncompressed
+
+------------------------------------------------------------------------
+Stefan Roese, 2012-08-23
diff --git a/board/a3m071/a3m071.c b/board/a3m071/a3m071.c
new file mode 100644
index 0000000..89ced82
--- /dev/null
+++ b/board/a3m071/a3m071.c
@@ -0,0 +1,335 @@
+/*
+ * (C) Copyright 2003-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
+ *
+ * (C) Copyright 2006
+ * MicroSys GmbH
+ *
+ * Copyright 2012 Stefan Roese <sr@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <mpc5xxx.h>
+#include <pci.h>
+#include <miiphy.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+#include "mt46v16m16-75.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if !defined(CONFIG_SYS_RAMBOOT) && \
+ (defined(CONFIG_SPL) && defined(CONFIG_SPL_BUILD))
+static void sdram_start(int hi_addr)
+{
+ long hi_addr_bit = hi_addr ? 0x01000000 : 0;
+ long control = SDRAM_CONTROL | hi_addr_bit;
+
+ /* unlock mode register */
+ out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000000);
+
+ /* precharge all banks */
+ out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000002);
+
+#ifdef SDRAM_DDR
+ /* set mode register: extended mode */
+ out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_EMODE);
+
+ /* set mode register: reset DLL */
+ out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_MODE | 0x04000000);
+#endif
+
+ /* precharge all banks */
+ out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000002);
+
+ /* auto refresh */
+ out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000004);
+
+ /* set mode register */
+ out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_MODE);
+
+ /* normal operation */
+ out_be32((void *)MPC5XXX_SDRAM_CTRL, control);
+}
+#endif
+
+/*
+ * ATTENTION: Although partially referenced initdram does NOT make real use
+ * use of CONFIG_SYS_SDRAM_BASE. The code does not work if
+ * CONFIG_SYS_SDRAM_BASE is something else than 0x00000000.
+ */
+phys_size_t initdram(int board_type)
+{
+ ulong dramsize = 0;
+ ulong dramsize2 = 0;
+ uint svr, pvr;
+#if !defined(CONFIG_SYS_RAMBOOT) && \
+ (defined(CONFIG_SPL) && defined(CONFIG_SPL_BUILD))
+ ulong test1, test2;
+
+ /* setup SDRAM chip selects */
+ out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0x0000001e); /* 2GB at 0x0 */
+ out_be32((void *)MPC5XXX_SDRAM_CS1CFG, 0x80000000); /* disabled */
+
+ /* setup config registers */
+ out_be32((void *)MPC5XXX_SDRAM_CONFIG1, SDRAM_CONFIG1);
+ out_be32((void *)MPC5XXX_SDRAM_CONFIG2, SDRAM_CONFIG2);
+
+#ifdef SDRAM_DDR
+ /* set tap delay */
+ out_be32((void *)MPC5XXX_CDM_PORCFG, SDRAM_TAPDELAY);
+#endif
+
+ /* find RAM size using SDRAM CS0 only */
+ sdram_start(0);
+ test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
+ sdram_start(1);
+ test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
+ if (test1 > test2) {
+ sdram_start(0);
+ dramsize = test1;
+ } else {
+ dramsize = test2;
+ }
+
+ /* memory smaller than 1MB is impossible */
+ if (dramsize < (1 << 20))
+ dramsize = 0;
+
+ /* set SDRAM CS0 size according to the amount of RAM found */
+ if (dramsize > 0) {
+ out_be32((void *)MPC5XXX_SDRAM_CS0CFG,
+ 0x13 + __builtin_ffs(dramsize >> 20) - 1);
+ } else {
+ out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0); /* disabled */
+ }
+#else /* CONFIG_SYS_RAMBOOT */
+
+ /* retrieve size of memory connected to SDRAM CS0 */
+ dramsize = in_be32((void *)MPC5XXX_SDRAM_CS0CFG) & 0xFF;
+ if (dramsize >= 0x13)
+ dramsize = (1 << (dramsize - 0x13)) << 20;
+ else
+ dramsize = 0;
+
+ /* retrieve size of memory connected to SDRAM CS1 */
+ dramsize2 = in_be32((void *)MPC5XXX_SDRAM_CS1CFG) & 0xFF;
+ if (dramsize2 >= 0x13)
+ dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
+ else
+ dramsize2 = 0;
+
+#endif /* CONFIG_SYS_RAMBOOT */
+
+ /*
+ * On MPC5200B we need to set the special configuration delay in the
+ * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
+ * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
+ *
+ * "The SDelay should be written to a value of 0x00000004. It is
+ * required to account for changes caused by normal wafer processing
+ * parameters."
+ */
+ svr = get_svr();
+ pvr = get_pvr();
+ if ((SVR_MJREV(svr) >= 2) && (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4))
+ out_be32((void *)MPC5XXX_SDRAM_SDELAY, 0x04);
+
+ return dramsize + dramsize2;
+}
+
+static void get_revisions(int *failsavelevel, int *digiboardversion,
+ int *fpgaversion)
+{
+ struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT;
+ u8 val;
+
+ /*
+ * Figure out failsavelevel
+ * see ticket dsvk#59
+ */
+ *failsavelevel = 0; /* 0=failsave, 1=board ok, 2=fpga ok */
+
+ /* read digitalboard-version from TMR[2..4] */
+ val = 0;
+ val |= (gpt->gpt2.sr & (1 << (31 - 23))) ? (1) : 0;
+ val |= (gpt->gpt3.sr & (1 << (31 - 23))) ? (1 << 1) : 0;
+ val |= (gpt->gpt4.sr & (1 << (31 - 23))) ? (1 << 2) : 0;
+ *digiboardversion = val;
+
+ if (*digiboardversion == 0) {
+ *failsavelevel = 1; /* digiboard-version ok */
+
+ /* read fpga-version from TMR[5..7] */
+ val = 0;
+ val |= (gpt->gpt5.sr & (1 << (31 - 23))) ? (1) : 0;
+ val |= (gpt->gpt6.sr & (1 << (31 - 23))) ? (1 << 1) : 0;
+ val |= (gpt->gpt7.sr & (1 << (31 - 23))) ? (1 << 2) : 0;
+ *fpgaversion = val;
+
+ if (*fpgaversion == 1)
+ *failsavelevel = 2; /* fpga-version ok */
+ }
+}
+
+/*
+ * This function is called from the SPL U-Boot version for
+ * early init stuff, that needs to be done for OS (e.g. Linux)
+ * booting. Doing it later in the real U-Boot would not work
+ * in case that the SPL U-Boot boots Linux directly.
+ */
+void spl_board_init(void)
+{
+ struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
+ struct mpc5xxx_mmap_ctl *mm =
+ (struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR;
+ int digiboardversion;
+ int failsavelevel;
+ int fpgaversion;
+ u32 val;
+
+ get_revisions(&failsavelevel, &digiboardversion, &fpgaversion);
+
+ val = in_be32(&mm->ipbi_ws_ctrl);
+
+ /* first clear bits 19..21 (CS3...5) */
+ val &= ~((1 << 19) | (1 << 20) | (1 << 21));
+ if (failsavelevel == 2) {
+ /* FPGA ok */
+ val |= (1 << 19) | (1 << 21);
+ }
+
+ if (failsavelevel >= 1) {
+ /* at least digiboard-version ok */
+ val |= (1 << 20);
+ }
+
+ /* And write new value back to register */
+ out_be32(&mm->ipbi_ws_ctrl, val);
+
+ /*
+ * No need to change the pin multiplexing (MPC5XXX_GPS_PORT_CONFIG)
+ * as all 3 config versions (failsave level) have the same setup.
+ */
+
+ /*
+ * Setup gpio_wkup_7 as watchdog AS INPUT to disable it - see
+ * ticket #60
+ *
+ * MPC5XXX_WU_GPIO_DIR direction is already 0 (INPUT)
+ * set bit 0(msb) to 1
+ */
+ setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, 1 << (31 - 0));
+
+ /* setup GPIOs for status-leds if needed - see ticket #57 */
+ if (failsavelevel > 0) {
+ /* digiboard-version is OK */
+ /* LED is LOW ACTIVE - so deactivate by set output to 1 */
+ gpio->simple_dvo |= 1 << (31 - 12);
+ gpio->simple_dvo |= 1 << (31 - 13);
+ /* set GPIO direction to output */
+ gpio->simple_ddr |= 1 << (31 - 12);
+ gpio->simple_ddr |= 1 << (31 - 13);
+ /* open drain config is set to "normal output" at reset */
+ /* gpio->simple_ode &=~ ( 1 << (31-12) ); */
+ /* gpio->simple_ode &=~ ( 1 << (31-13) ); */
+ /* enable as GPIO */
+ gpio->simple_gpioe |= 1 << (31 - 12);
+ gpio->simple_gpioe |= 1 << (31 - 13);
+ }
+
+ /* setup fpga irq - see ticket #65 */
+ if (failsavelevel > 1) {
+ /*
+ * The main irq initialisation is done in interrupts.c
+ * mpc5xxx_init_irq
+ */
+ struct mpc5xxx_intr *intr =
+ (struct mpc5xxx_intr *)(MPC5XXX_ICTL);
+
+ setbits_be32(&intr->ctrl, 0x08C01801);
+
+ /*
+ * The MBAR+0x0524 Bit 21:23 CSe are ignored here due to the
+ * already cleared (intr_ctrl) MBAR+0x0510 ECLR[0] bit above
+ */
+ }
+
+}
+
+int checkboard(void)
+{
+ int digiboardversion;
+ int failsavelevel;
+ int fpgaversion;
+
+ get_revisions(&failsavelevel, &digiboardversion, &fpgaversion);
+
+ puts("Board: A3M071\n");
+ printf("Rev: failsave level %u\n", failsavelevel);
+ printf(" digiboard IO version %u\n", digiboardversion);
+ if (failsavelevel > 0) /* only if fpga-version red */
+ printf(" fpga IO version %u\n", fpgaversion);
+
+ return 0;
+}
+
+/* miscellaneous platform dependent initialisations */
+int misc_init_r(void)
+{
+ /* adjust flash start and offset to detected values */
+ gd->bd->bi_flashstart = flash_info[0].start[0];
+ gd->bd->bi_flashoffset = 0;
+
+ /* adjust mapping */
+ out_be32((void *)MPC5XXX_BOOTCS_START,
+ START_REG(gd->bd->bi_flashstart));
+ out_be32((void *)MPC5XXX_CS0_START, START_REG(gd->bd->bi_flashstart));
+ out_be32((void *)MPC5XXX_BOOTCS_STOP,
+ STOP_REG(gd->bd->bi_flashstart, gd->bd->bi_flashsize));
+ out_be32((void *)MPC5XXX_CS0_STOP,
+ STOP_REG(gd->bd->bi_flashstart, gd->bd->bi_flashsize));
+
+ return 0;
+}
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+void ft_board_setup(void *blob, bd_t * bd)
+{
+ ft_cpu_setup(blob, bd);
+}
+#endif /* defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP) */
+
+#ifdef CONFIG_SPL_OS_BOOT
+/*
+ * A3M071 specific implementation of spl_start_uboot()
+ *
+ * RETURN
+ * 0 if booting into OS is selected (default)
+ * 1 if booting into U-Boot is selected
+ */
+int spl_start_uboot(void)
+{
+ char s[8];
+
+ env_init();
+ getenv_f("boot_os", s, sizeof(s));
+ if ((s != NULL) && (strcmp(s, "yes") == 0))
+ return 0;
+
+ return 1;
+}
+#endif
diff --git a/board/chromebook-x86/coreboot/coreboot_pci.c b/board/a3m071/mt46v16m16-75.h
index 732ca3c..e49e996 100644
--- a/board/chromebook-x86/coreboot/coreboot_pci.c
+++ b/board/a3m071/mt46v16m16-75.h
@@ -1,10 +1,6 @@
/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * (C) Copyright 2008,2009
- * Graeme Russ, <graeme.russ@gmail.com>
- *
- * (C) Copyright 2002
- * Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
+ * (C) Copyright 2004
+ * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -16,15 +12,21 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
*/
-void pci_init_board(void)
-{
-}
+#define SDRAM_DDR /* is DDR */
+
+#if defined(CONFIG_MPC5200)
+/* Settings for XLB = 132 MHz */
+#define SDRAM_MODE 0x018D0000
+#define SDRAM_EMODE 0x40090000
+#define SDRAM_CONTROL 0x704f0f00
+#define SDRAM_CONFIG1 0x73722930
+#define SDRAM_CONFIG2 0x47770000
+#define SDRAM_TAPDELAY 0x10000000
+
+#else
+#error CONFIG_MPC5200 not defined
+#endif
diff --git a/board/chromebook-x86/coreboot/Makefile b/board/chromebook-x86/coreboot/Makefile
index cfcc0df..886baf6 100644
--- a/board/chromebook-x86/coreboot/Makefile
+++ b/board/chromebook-x86/coreboot/Makefile
@@ -32,9 +32,6 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
-COBJS-y += coreboot.o
-COBJS-$(CONFIG_PCI) += coreboot_pci.o
-SOBJS-y += coreboot_start16.o
SOBJS-y += coreboot_start.o
SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
diff --git a/board/chromebook-x86/coreboot/config.mk b/board/chromebook-x86/coreboot/config.mk
new file mode 100644
index 0000000..f720851
--- /dev/null
+++ b/board/chromebook-x86/coreboot/config.mk
@@ -0,0 +1,37 @@
+#
+# Copyright (c) 2011 The Chromium OS Authors. All rights reserved.
+# Use of this source code is governed by a BSD-style license that can be
+# found in the LICENSE file.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions are
+# met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above
+# copyright notice, this list of conditions and the following disclaimer
+# in the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Google Inc. nor the names of its
+# contributors may be used to endorse or promote products derived from
+# this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# Alternatively, this software may be distributed under the terms of the
+# GNU General Public License ("GPL") version 2 as published by the Free
+# Software Foundation.
+#
+
+HOSTCFLAGS_autoconf.mk.dep = -Wno-variadic-macros
diff --git a/board/chromebook-x86/coreboot/coreboot.c b/board/chromebook-x86/coreboot/coreboot.c
deleted file mode 100644
index 22a643c..0000000
--- a/board/chromebook-x86/coreboot/coreboot.c
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * (C) Copyright 2008
- * Graeme Russ, graeme.russ@gmail.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/u-boot-x86.h>
-#include <flash.h>
-#include <netdev.h>
-#include <asm/arch-coreboot/tables.h>
-#include <asm/arch-coreboot/sysinfo.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-unsigned long monitor_flash_len = CONFIG_SYS_MONITOR_LEN;
-
-/*
- * Miscellaneous platform dependent initializations
- */
-int cpu_init_f(void)
-{
- int ret = get_coreboot_info(&lib_sysinfo);
- if (ret != 0)
- printf("Failed to parse coreboot tables.\n");
- return ret;
-}
-
-int board_early_init_f(void)
-{
- return 0;
-}
-
-int board_early_init_r(void)
-{
- /* CPU Speed to 100MHz */
- gd->cpu_clk = 100000000;
-
- /* Crystal is 33.000MHz */
- gd->bus_clk = 33000000;
-
- return 0;
-}
-
-void show_boot_progress(int val)
-{
-}
-
-
-int last_stage_init(void)
-{
- return 0;
-}
-
-#ifndef CONFIG_SYS_NO_FLASH
-ulong board_flash_get_legacy(ulong base, int banknum, flash_info_t *info)
-{
- return 0;
-}
-#endif
-
-int board_eth_init(bd_t *bis)
-{
- return pci_eth_init(bis);
-}
-
-void setup_pcat_compatibility()
-{
-}
diff --git a/board/chromebook-x86/coreboot/coreboot_start16.S b/board/chromebook-x86/coreboot/coreboot_start16.S
deleted file mode 100644
index 9ad06df..0000000
--- a/board/chromebook-x86/coreboot/coreboot_start16.S
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * Copyright (c) 2011 The Chromium OS Authors.
- * (C) Copyright 2008
- * Graeme Russ, graeme.russ@gmail.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * 16bit initialization code.
- * This code have to map the area of the boot flash
- * that is used by U-boot to its final destination.
- */
-
-.text
-.section .start16, "ax"
-.code16
-.globl board_init16
-board_init16:
- jmp board_init16_ret
-
-.section .bios, "ax"
-.code16
-.globl realmode_reset
-.hidden realmode_reset
-.type realmode_reset, @function
-realmode_reset:
-
-1: hlt
- jmp 1
diff --git a/board/chromebook-x86/dts/alex.dts b/board/chromebook-x86/dts/alex.dts
new file mode 100644
index 0000000..cb6a9e4
--- /dev/null
+++ b/board/chromebook-x86/dts/alex.dts
@@ -0,0 +1,24 @@
+/dts-v1/;
+
+/include/ "coreboot.dtsi"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "Google Alex";
+ compatible = "google,alex", "intel,atom-pineview";
+
+ config {
+ silent_console = <0>;
+ };
+
+ gpio: gpio {};
+
+ serial {
+ reg = <0x3f8 8>;
+ clock-frequency = <115200>;
+ };
+
+ chosen { };
+ memory { device_type = "memory"; reg = <0 0>; };
+};
diff --git a/board/chromebook-x86/dts/link.dts b/board/chromebook-x86/dts/link.dts
new file mode 100644
index 0000000..af60f59
--- /dev/null
+++ b/board/chromebook-x86/dts/link.dts
@@ -0,0 +1,24 @@
+/dts-v1/;
+
+/include/ "coreboot.dtsi"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ model = "Google Link";
+ compatible = "google,link", "intel,celeron-ivybridge";
+
+ config {
+ silent_console = <0>;
+ };
+
+ gpio: gpio {};
+
+ serial {
+ reg = <0x3f8 8>;
+ clock-frequency = <115200>;
+ };
+
+ chosen { };
+ memory { device_type = "memory"; reg = <0 0>; };
+};
diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c
index c41f11d..a3079db 100644
--- a/board/davedenx/qong/qong.c
+++ b/board/davedenx/qong/qong.c
@@ -28,11 +28,12 @@
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
#include <nand.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <fsl_pmic.h>
#include <asm/gpio.h>
#include "qong_fpga.h"
#include <watchdog.h>
+#include <errno.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -172,10 +173,15 @@ int board_late_init(void)
{
u32 val;
struct pmic *p;
+ int ret;
- pmic_init();
- p = get_pmic();
+ ret = pmic_init(I2C_PMIC);
+ if (ret)
+ return ret;
+ p = pmic_get("FSL_PMIC");
+ if (!p)
+ return -ENODEV;
/* Enable RTC battery */
pmic_reg_read(p, REG_POWER_CTL0, &val);
pmic_reg_write(p, REG_POWER_CTL0, val | COINCHEN);
diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c
index 98051fb..d7deae4 100644
--- a/board/esd/cpci750/cpci750.c
+++ b/board/esd/cpci750/cpci750.c
@@ -953,22 +953,18 @@ int mem_test_walk (void)
/*********************************************************************/
int testdram (void)
{
- char *s;
int rundata = 0;
int runaddress = 0;
int runwalk = 0;
#ifdef CONFIG_SYS_DRAM_TEST_DATA
- s = getenv ("testdramdata");
- rundata = (s && (*s == 'y')) ? 1 : 0;
+ rundata = getenv_yesno("testdramdata") == 1;
#endif
#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
- s = getenv ("testdramaddress");
- runaddress = (s && (*s == 'y')) ? 1 : 0;
+ runaddress = getenv_yesno("testdramaddress") == 1;
#endif
#ifdef CONFIG_SYS_DRAM_TEST_WALK
- s = getenv ("testdramwalk");
- runwalk = (s && (*s == 'y')) ? 1 : 0;
+ runwalk = getenv_yesno("testdramwalk") == 1;
#endif
if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c
index f1ffb7b..e9a78a3 100644
--- a/board/esd/pmc440/cmd_pmc440.c
+++ b/board/esd/pmc440/cmd_pmc440.c
@@ -391,7 +391,7 @@ int do_painit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
nextbase -= ((CONFIG_ENV_SIZE + 4096 - 1) & ~(4096 - 1));
envp = (env_t *)nextbase;
res = (char *)envp->data;
- len = hexport_r(&env_htab, '\0', &res, ENV_SIZE, 0, NULL);
+ len = hexport_r(&env_htab, '\0', 0, &res, ENV_SIZE, 0, NULL);
if (len < 0) {
error("Cannot export environment: errno = %d\n", errno);
return 1;
diff --git a/board/exmeritus/hww1u1a/hww1u1a.c b/board/exmeritus/hww1u1a/hww1u1a.c
index 52c22fa..89cfaad 100644
--- a/board/exmeritus/hww1u1a/hww1u1a.c
+++ b/board/exmeritus/hww1u1a/hww1u1a.c
@@ -105,7 +105,7 @@ int checkboard(void)
* and delay a while before we continue.
*/
if (mpc85xx_gpio_get(GPIO_RESETS)) {
- ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+ ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
puts("Debugger detected... extra device reset enabled!\n");
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 36f7c4f..75725b4 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -53,6 +53,7 @@ COBJS-$(CONFIG_P2020DS) += ics307_clk.o
COBJS-$(CONFIG_P3041DS) += ics307_clk.o
COBJS-$(CONFIG_P4080DS) += ics307_clk.o
COBJS-$(CONFIG_P5020DS) += ics307_clk.o
+COBJS-$(CONFIG_P5040DS) += ics307_clk.o
COBJS-$(CONFIG_VSC_CROSSBAR) += vsc3316_3308.o
# deal with common files for P-series corenet based devices
@@ -60,6 +61,7 @@ SUBLIB-$(CONFIG_P2041RDB) += p_corenet/libp_corenet.o
SUBLIB-$(CONFIG_P3041DS) += p_corenet/libp_corenet.o
SUBLIB-$(CONFIG_P4080DS) += p_corenet/libp_corenet.o
SUBLIB-$(CONFIG_P5020DS) += p_corenet/libp_corenet.o
+SUBLIB-$(CONFIG_P5040DS) += p_corenet/libp_corenet.o
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
diff --git a/board/freescale/common/ngpixis.h b/board/freescale/common/ngpixis.h
index 1d4483d..a239ee3 100644
--- a/board/freescale/common/ngpixis.h
+++ b/board/freescale/common/ngpixis.h
@@ -45,7 +45,7 @@ typedef struct ngpixis {
struct {
u8 sw;
u8 en;
- } s[8];
+ } s[9]; /* s[0]..s[7] is SW1..SW8, and s[8] is SW11 */
} __attribute__ ((packed)) ngpixis_t;
/* Pointer to the PIXIS register set */
diff --git a/board/freescale/corenet_ds/Makefile b/board/freescale/corenet_ds/Makefile
index 1fdf8b7..d79193a 100644
--- a/board/freescale/corenet_ds/Makefile
+++ b/board/freescale/corenet_ds/Makefile
@@ -31,9 +31,11 @@ COBJS-y += ddr.o
COBJS-$(CONFIG_P3041DS) += eth_hydra.o
COBJS-$(CONFIG_P4080DS) += eth_p4080.o
COBJS-$(CONFIG_P5020DS) += eth_hydra.o
+COBJS-$(CONFIG_P5040DS) += eth_superhydra.o
COBJS-$(CONFIG_P3041DS) += p3041ds_ddr.o
COBJS-$(CONFIG_P4080DS) += p4080ds_ddr.o
COBJS-$(CONFIG_P5020DS) += p5020ds_ddr.o
+COBJS-$(CONFIG_P5040DS) += p5040ds_ddr.o
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c
index a33c936..21428e3 100644
--- a/board/freescale/corenet_ds/corenet_ds.c
+++ b/board/freescale/corenet_ds/corenet_ds.c
@@ -45,6 +45,7 @@ int checkboard (void)
struct cpu_type *cpu = gd->cpu;
ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
unsigned int i;
+ static const char * const freq[] = {"100", "125", "156.25", "212.5" };
printf("Board: %sDS, ", cpu->name);
printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
@@ -83,20 +84,28 @@ int checkboard (void)
* don't match.
*/
puts("SERDES Reference Clocks: ");
-#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS)
+#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) \
+ || defined(CONFIG_P5040DS)
sw = in_8(&PIXIS_SW(5));
for (i = 0; i < 3; i++) {
- static const char *freq[] = {"100", "125", "156.25", "212.5" };
unsigned int clock = (sw >> (6 - (2 * i))) & 3;
printf("Bank%u=%sMhz ", i+1, freq[clock]);
}
+#ifdef CONFIG_P5040DS
+ /* On P5040DS, SW11[7:8] determines the Bank 4 frequency */
+ sw = in_8(&PIXIS_SW(9));
+ printf("Bank4=%sMhz ", freq[sw & 3]);
+#endif
puts("\n");
#else
sw = in_8(&PIXIS_SW(3));
- printf("Bank1=%uMHz ", (sw & 0x40) ? 125 : 100);
- printf("Bank2=%sMHz ", (sw & 0x20) ? "156.25" : "125");
- printf("Bank3=%sMHz\n", (sw & 0x10) ? "156.25" : "125");
+ /* SW3[2]: 0 = 100 Mhz, 1 = 125 MHz */
+ /* SW3[3]: 0 = 125 Mhz, 1 = 156.25 MHz */
+ /* SW3[4]: 0 = 125 Mhz, 1 = 156.25 MHz */
+ printf("Bank1=%sMHz ", freq[!!(sw & 0x40)]);
+ printf("Bank2=%sMHz ", freq[1 + !!(sw & 0x20)]);
+ printf("Bank3=%sMHz\n", freq[1 + !!(sw & 0x10)]);
#endif
return 0;
@@ -168,7 +177,8 @@ int misc_init_r(void)
unsigned int i;
u8 sw;
-#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS)
+#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) \
+ || defined(CONFIG_P5040DS)
sw = in_8(&PIXIS_SW(5));
for (i = 0; i < 3; i++) {
unsigned int clock = (sw >> (6 - (2 * i))) & 3;
diff --git a/board/freescale/corenet_ds/ddr.c b/board/freescale/corenet_ds/ddr.c
index 4a53b8d..da284cd 100644
--- a/board/freescale/corenet_ds/ddr.c
+++ b/board/freescale/corenet_ds/ddr.c
@@ -139,8 +139,8 @@ static const struct board_specific_parameters udimm0[] = {
{2, 1250, 4, 6, 0xff, 2, 0},
{2, 1350, 5, 7, 0xff, 2, 0},
{2, 1666, 5, 8, 0xff, 2, 0},
- {1, 850, 4, 5, 0xff, 2, 0},
- {1, 950, 4, 7, 0xff, 2, 0},
+ {1, 1250, 4, 6, 0xff, 2, 0},
+ {1, 1335, 4, 7, 0xff, 2, 0},
{1, 1666, 4, 8, 0xff, 2, 0},
{}
};
diff --git a/board/freescale/corenet_ds/eth_superhydra.c b/board/freescale/corenet_ds/eth_superhydra.c
new file mode 100644
index 0000000..ef9de25
--- /dev/null
+++ b/board/freescale/corenet_ds/eth_superhydra.c
@@ -0,0 +1,722 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ * Author: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file handles the board muxing between the Fman Ethernet MACs and
+ * the RGMII/SGMII/XGMII PHYs on a Freescale P5040 "Super Hydra" reference
+ * board. The RGMII PHYs are the two on-board 1Gb ports. The SGMII PHYs are
+ * provided by the standard Freescale four-port SGMII riser card. The 10Gb
+ * XGMII PHYs are provided via the XAUI riser card. The P5040 has 2 FMans
+ * and 5 1G interfaces and 10G interface per FMan. Based on the options in
+ * the RCW, we could have upto 3 SGMII cards and 1 XAUI card at a time.
+ *
+ * Muxing is handled via the PIXIS BRDCFG1 register. The EMI1 bits control
+ * muxing among the RGMII PHYs and the SGMII PHYs. The value for RGMII is
+ * always the same (0). The value for SGMII depends on which slot the riser is
+ * inserted in. The EMI2 bits control muxing for the the XGMII. Like SGMII,
+ * the value is based on which slot the XAUI is inserted in.
+ *
+ * The SERDES configuration is used to determine where the SGMII and XAUI cards
+ * exist, and also which Fman's MACs are routed to which PHYs. So for a given
+ * Fman MAC, there is one and only PHY it connects to. MACs cannot be routed
+ * to PHYs dynamically.
+ *
+ *
+ * This file also updates the device tree in three ways:
+ *
+ * 1) The status of each virtual MDIO node that is referenced by an Ethernet
+ * node is set to "okay".
+ *
+ * 2) The phy-handle property of each active Ethernet MAC node is set to the
+ * appropriate PHY node.
+ *
+ * 3) The "mux value" for each virtual MDIO node is set to the correct value,
+ * if necessary. Some virtual MDIO nodes do not have configurable mux
+ * values, so those values are hard-coded in the DTS. On the HYDRA board,
+ * the virtual MDIO node for the SGMII card needs to be updated.
+ *
+ * For all this to work, the device tree needs to have the following:
+ *
+ * 1) An alias for each PHY node that an Ethernet node could be routed to.
+ *
+ * 2) An alias for each real and virtual MDIO node that is disabled by default
+ * and might need to be enabled, and also might need to have its mux-value
+ * updated.
+ */
+
+#include <common.h>
+#include <netdev.h>
+#include <asm/fsl_serdes.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <malloc.h>
+#include <fdt_support.h>
+#include <asm/fsl_dtsec.h>
+
+#include "../common/ngpixis.h"
+#include "../common/fman.h"
+
+#ifdef CONFIG_FMAN_ENET
+
+#define BRDCFG1_EMI1_SEL_MASK 0x70
+#define BRDCFG1_EMI1_SEL_SLOT1 0x10
+#define BRDCFG1_EMI1_SEL_SLOT2 0x20
+#define BRDCFG1_EMI1_SEL_SLOT5 0x30
+#define BRDCFG1_EMI1_SEL_SLOT6 0x40
+#define BRDCFG1_EMI1_SEL_SLOT7 0x50
+#define BRDCFG1_EMI1_SEL_SLOT3 0x60
+#define BRDCFG1_EMI1_SEL_RGMII 0x00
+#define BRDCFG1_EMI1_EN 0x08
+#define BRDCFG1_EMI2_SEL_MASK 0x06
+#define BRDCFG1_EMI2_SEL_SLOT1 0x00
+#define BRDCFG1_EMI2_SEL_SLOT2 0x02
+
+#define BRDCFG2_REG_GPIO_SEL 0x20
+
+/*
+ * BRDCFG1 mask and value for each MAC
+ *
+ * This array contains the BRDCFG1 values (in mask/val format) that route the
+ * MDIO bus to a particular RGMII or SGMII PHY.
+ */
+static struct {
+ u8 mask;
+ u8 val;
+} mdio_mux[NUM_FM_PORTS];
+
+/*
+ * Mapping of all 18 SERDES lanes to board slots. A value of '0' here means
+ * that the mapping must be determined dynamically, or that the lane maps to
+ * something other than a board slot
+ */
+static u8 lane_to_slot[] = {
+ 7, 7, 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 2, 2, 1, 1, 0, 0, 0, 0
+};
+
+/*
+ * Set the board muxing for a given MAC
+ *
+ * The MDIO layer calls this function every time it wants to talk to a PHY.
+ */
+void super_hydra_mux_mdio(u8 mask, u8 val)
+{
+ clrsetbits_8(&pixis->brdcfg1, mask, val);
+}
+
+struct super_hydra_mdio {
+ u8 mask;
+ u8 val;
+ struct mii_dev *realbus;
+};
+
+static int super_hydra_mdio_read(struct mii_dev *bus, int addr, int devad,
+ int regnum)
+{
+ struct super_hydra_mdio *priv = bus->priv;
+
+ super_hydra_mux_mdio(priv->mask, priv->val);
+
+ return priv->realbus->read(priv->realbus, addr, devad, regnum);
+}
+
+static int super_hydra_mdio_write(struct mii_dev *bus, int addr, int devad,
+ int regnum, u16 value)
+{
+ struct super_hydra_mdio *priv = bus->priv;
+
+ super_hydra_mux_mdio(priv->mask, priv->val);
+
+ return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
+}
+
+static int super_hydra_mdio_reset(struct mii_dev *bus)
+{
+ struct super_hydra_mdio *priv = bus->priv;
+
+ return priv->realbus->reset(priv->realbus);
+}
+
+static void super_hydra_mdio_set_mux(char *name, u8 mask, u8 val)
+{
+ struct mii_dev *bus = miiphy_get_dev_by_name(name);
+ struct super_hydra_mdio *priv = bus->priv;
+
+ priv->mask = mask;
+ priv->val = val;
+}
+
+static int super_hydra_mdio_init(char *realbusname, char *fakebusname)
+{
+ struct super_hydra_mdio *hmdio;
+ struct mii_dev *bus = mdio_alloc();
+
+ if (!bus) {
+ printf("Failed to allocate Hydra MDIO bus\n");
+ return -1;
+ }
+
+ hmdio = malloc(sizeof(*hmdio));
+ if (!hmdio) {
+ printf("Failed to allocate Hydra private data\n");
+ free(bus);
+ return -1;
+ }
+
+ bus->read = super_hydra_mdio_read;
+ bus->write = super_hydra_mdio_write;
+ bus->reset = super_hydra_mdio_reset;
+ sprintf(bus->name, fakebusname);
+
+ hmdio->realbus = miiphy_get_dev_by_name(realbusname);
+
+ if (!hmdio->realbus) {
+ printf("No bus with name %s\n", realbusname);
+ free(bus);
+ free(hmdio);
+ return -1;
+ }
+
+ bus->priv = hmdio;
+
+ return mdio_register(bus);
+}
+
+/*
+ * Given the following ...
+ *
+ * 1) A pointer to an Fman Ethernet node (as identified by the 'compat'
+ * compatible string and 'addr' physical address)
+ *
+ * 2) An Fman port
+ *
+ * ... update the phy-handle property of the Ethernet node to point to the
+ * right PHY. This assumes that we already know the PHY for each port. That
+ * information is stored in mdio_mux[].
+ *
+ * The offset of the Fman Ethernet node is also passed in for convenience, but
+ * it is not used.
+ *
+ * Note that what we call "Fman ports" (enum fm_port) is really an Fman MAC.
+ * Inside the Fman, "ports" are things that connect to MACs. We only call them
+ * ports in U-Boot because on previous Ethernet devices (e.g. Gianfar), MACs
+ * and ports are the same thing.
+ */
+void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
+ enum fm_port port, int offset)
+{
+ enum srds_prtcl device;
+ int lane, slot, phy;
+ char alias[32];
+
+ /* RGMII and XGMII are already mapped correctly in the DTS */
+
+ if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) {
+ device = serdes_device_from_fm_port(port);
+ lane = serdes_get_first_lane(device);
+ slot = lane_to_slot[lane];
+ phy = fm_info_get_phy_address(port);
+
+ sprintf(alias, "phy_sgmii_slot%u_%x", slot, phy);
+ fdt_set_phy_handle(fdt, compat, addr, alias);
+ }
+}
+
+#define PIXIS_SW2_LANE_23_SEL 0x80
+#define PIXIS_SW2_LANE_45_SEL 0x40
+#define PIXIS_SW2_LANE_67_SEL_MASK 0x30
+#define PIXIS_SW2_LANE_67_SEL_5 0x00
+#define PIXIS_SW2_LANE_67_SEL_6 0x20
+#define PIXIS_SW2_LANE_67_SEL_7 0x10
+#define PIXIS_SW2_LANE_8_SEL 0x08
+#define PIXIS_SW2_LANE_1617_SEL 0x04
+#define PIXIS_SW11_LANE_9_SEL 0x04
+/*
+ * Initialize the lane_to_slot[] array.
+ *
+ * On the P4080DS "Expedition" board, the mapping of SERDES lanes to board
+ * slots is hard-coded. On the Hydra board, however, the mapping is controlled
+ * by board switch SW2, so the lane_to_slot[] array needs to be dynamically
+ * initialized.
+ */
+static void initialize_lane_to_slot(void)
+{
+ u8 sw2 = in_8(&PIXIS_SW(2));
+ /* SW11 appears in the programming model as SW9 */
+ u8 sw11 = in_8(&PIXIS_SW(9));
+
+ lane_to_slot[2] = (sw2 & PIXIS_SW2_LANE_23_SEL) ? 7 : 4;
+ lane_to_slot[3] = lane_to_slot[2];
+
+ lane_to_slot[4] = (sw2 & PIXIS_SW2_LANE_45_SEL) ? 7 : 6;
+ lane_to_slot[5] = lane_to_slot[4];
+
+ switch (sw2 & PIXIS_SW2_LANE_67_SEL_MASK) {
+ case PIXIS_SW2_LANE_67_SEL_5:
+ lane_to_slot[6] = 5;
+ break;
+ case PIXIS_SW2_LANE_67_SEL_6:
+ lane_to_slot[6] = 6;
+ break;
+ case PIXIS_SW2_LANE_67_SEL_7:
+ lane_to_slot[6] = 7;
+ break;
+ }
+ lane_to_slot[7] = lane_to_slot[6];
+
+ lane_to_slot[8] = (sw2 & PIXIS_SW2_LANE_8_SEL) ? 3 : 0;
+ lane_to_slot[9] = (sw11 & PIXIS_SW11_LANE_9_SEL) ? 0 : 3;
+
+ lane_to_slot[16] = (sw2 & PIXIS_SW2_LANE_1617_SEL) ? 1 : 0;
+ lane_to_slot[17] = lane_to_slot[16];
+}
+
+#endif /* #ifdef CONFIG_FMAN_ENET */
+
+/*
+ * Configure the status for the virtual MDIO nodes
+ *
+ * Rather than create the virtual MDIO nodes from scratch for each active
+ * virtual MDIO, we expect the DTS to have the nodes defined already, and we
+ * only enable the ones that are actually active.
+ *
+ * We assume that the DTS already hard-codes the status for all the
+ * virtual MDIO nodes to "disabled", so all we need to do is enable the
+ * active ones.
+ */
+void fdt_fixup_board_enet(void *fdt)
+{
+#ifdef CONFIG_FMAN_ENET
+ enum fm_port i;
+ int lane, slot;
+
+ for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+ int idx = i - FM1_DTSEC1;
+
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_SGMII:
+ lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
+ if (lane >= 0) {
+ char alias[32];
+
+ slot = lane_to_slot[lane];
+ sprintf(alias, "hydra_sg_slot%u", slot);
+ fdt_status_okay_by_alias(fdt, alias);
+ debug("Enabled MDIO node %s (slot %i)\n",
+ alias, slot);
+ }
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ fdt_status_okay_by_alias(fdt, "hydra_rg");
+ debug("Enabled MDIO node hydra_rg\n");
+ break;
+ default:
+ break;
+ }
+ }
+
+ lane = serdes_get_first_lane(XAUI_FM1);
+ if (lane >= 0) {
+ char alias[32];
+
+ slot = lane_to_slot[lane];
+ sprintf(alias, "hydra_xg_slot%u", slot);
+ fdt_status_okay_by_alias(fdt, alias);
+ debug("Enabled MDIO node %s (slot %i)\n", alias, slot);
+ }
+
+#if CONFIG_SYS_NUM_FMAN == 2
+ for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
+ int idx = i - FM2_DTSEC1;
+
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_SGMII:
+ lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx);
+ if (lane >= 0) {
+ char alias[32];
+
+ slot = lane_to_slot[lane];
+ sprintf(alias, "hydra_sg_slot%u", slot);
+ fdt_status_okay_by_alias(fdt, alias);
+ debug("Enabled MDIO node %s (slot %i)\n",
+ alias, slot);
+ }
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ fdt_status_okay_by_alias(fdt, "hydra_rg");
+ debug("Enabled MDIO node hydra_rg\n");
+ break;
+ default:
+ break;
+ }
+ }
+
+ lane = serdes_get_first_lane(XAUI_FM2);
+ if (lane >= 0) {
+ char alias[32];
+
+ slot = lane_to_slot[lane];
+ sprintf(alias, "hydra_xg_slot%u", slot);
+ fdt_status_okay_by_alias(fdt, alias);
+ debug("Enabled MDIO node %s (slot %i)\n", alias, slot);
+ }
+#endif /* CONFIG_SYS_NUM_FMAN == 2 */
+#endif /* CONFIG_FMAN_ENET */
+}
+
+/*
+ * Mapping of SerDes Protocol to MDIO MUX value and PHY address.
+ *
+ * Fman 1:
+ * DTSEC1 | DTSEC2 | DTSEC3 | DTSEC4
+ * Mux Phy | Mux Phy | Mux Phy | Mux Phy
+ * Value Addr | Value Addr | Value Addr | Value Addr
+ * 0x00 2 1c | 2 1d | 2 1e | 2 1f
+ * 0x01 | | 6 1c |
+ * 0x02 | | 3 1c | 3 1d
+ * 0x03 2 1c | 2 1d | 2 1e | 2 1f
+ * 0x04 2 1c | 2 1d | 2 1e | 2 1f
+ * 0x05 | | 3 1c | 3 1d
+ * 0x06 2 1c | 2 1d | 2 1e | 2 1f
+ * 0x07 | | 6 1c |
+ * 0x11 2 1c | 2 1d | 2 1e | 2 1f
+ * 0x2a 2 | | 2 1e | 2 1f
+ * 0x34 6 1c | 6 1d | 4 1e | 4 1f
+ * 0x35 | | 3 1c | 3 1d
+ * 0x36 6 1c | 6 1d | 4 1e | 4 1f
+ * | | |
+ * Fman 2: | | |
+ * DTSEC1 | DTSEC2 | DTSEC3 | DTSEC4
+ * EMI1 | EMI1 | EMI1 | EMI1
+ * Mux Phy | Mux Phy | Mux Phy | Mux Phy
+ * Value Addr | Value Addr | Value Addr | Value Addr
+ * 0x00 | | 6 1c | 6 1d
+ * 0x01 | | |
+ * 0x02 | | 6 1c | 6 1d
+ * 0x03 3 1c | 3 1d | 6 1c | 6 1d
+ * 0x04 3 1c | 3 1d | 6 1c | 6 1d
+ * 0x05 | | 6 1c | 6 1d
+ * 0x06 | | 6 1c | 6 1d
+ * 0x07 | | |
+ * 0x11 | | |
+ * 0x2a | | |
+ * 0x34 | | |
+ * 0x35 | | |
+ * 0x36 | | |
+ */
+
+int board_eth_init(bd_t *bis)
+{
+#ifdef CONFIG_FMAN_ENET
+ struct fsl_pq_mdio_info dtsec_mdio_info;
+ struct tgec_mdio_info tgec_mdio_info;
+ unsigned int i, slot;
+ int lane;
+ ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ int srds_prtcl = (in_be32(&gur->rcwsr[4]) &
+ FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26;
+
+ printf("Initializing Fman\n");
+
+ initialize_lane_to_slot();
+
+ /* We want to use the PIXIS to configure MUX routing, not GPIOs. */
+ setbits_8(&pixis->brdcfg2, BRDCFG2_REG_GPIO_SEL);
+
+ memset(mdio_mux, 0, sizeof(mdio_mux));
+
+ dtsec_mdio_info.regs =
+ (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
+ dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+ /* Register the real 1G MDIO bus */
+ fsl_pq_mdio_init(bis, &dtsec_mdio_info);
+
+ tgec_mdio_info.regs =
+ (struct tgec_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
+ tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
+
+ /* Register the real 10G MDIO bus */
+ fm_tgec_mdio_init(bis, &tgec_mdio_info);
+
+ /* Register the three virtual MDIO front-ends */
+ super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME,
+ "SUPER_HYDRA_RGMII_MDIO");
+ super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME,
+ "SUPER_HYDRA_FM1_SGMII_MDIO");
+ super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME,
+ "SUPER_HYDRA_FM2_SGMII_MDIO");
+ super_hydra_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME,
+ "SUPER_HYDRA_FM1_TGEC_MDIO");
+ super_hydra_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME,
+ "SUPER_HYDRA_FM2_TGEC_MDIO");
+
+ /*
+ * Program the DTSEC PHY addresses assuming that they are all SGMII.
+ * For any DTSEC that's RGMII, we'll override its PHY address later.
+ * We assume that DTSEC5 is only used for RGMII.
+ */
+ fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
+ fm_info_set_phy_address(FM1_10GEC1, CONFIG_SYS_FM2_10GEC1_PHY_ADDR);
+
+#if (CONFIG_SYS_NUM_FMAN == 2)
+ fm_info_set_phy_address(FM2_DTSEC1, CONFIG_SYS_FM2_DTSEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC2, CONFIG_SYS_FM2_DTSEC2_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC3, CONFIG_SYS_FM2_DTSEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM2_DTSEC4, CONFIG_SYS_FM2_DTSEC2_PHY_ADDR);
+ fm_info_set_phy_address(FM2_10GEC1, CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
+#endif
+
+ switch (srds_prtcl) {
+ case 0:
+ case 3:
+ case 4:
+ case 6:
+ case 0x11:
+ case 0x2a:
+ case 0x34:
+ case 0x36:
+ fm_info_set_phy_address(FM1_DTSEC3,
+ CONFIG_SYS_FM1_DTSEC3_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC4,
+ CONFIG_SYS_FM1_DTSEC4_PHY_ADDR);
+ break;
+ case 1:
+ case 2:
+ case 5:
+ case 7:
+ case 0x35:
+ fm_info_set_phy_address(FM1_DTSEC3,
+ CONFIG_SYS_FM1_DTSEC1_PHY_ADDR);
+ fm_info_set_phy_address(FM1_DTSEC4,
+ CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
+ break;
+ default:
+ printf("Fman: Unsupport SerDes Protocol 0x%02x\n", srds_prtcl);
+ break;
+ }
+
+ for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+ int idx = i - FM1_DTSEC1;
+
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_SGMII:
+ lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
+ if (lane < 0)
+ break;
+ slot = lane_to_slot[lane];
+ mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK;
+ debug("FM1@DTSEC%u expects SGMII in slot %u\n",
+ idx + 1, slot);
+ switch (slot) {
+ case 1:
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT1 |
+ BRDCFG1_EMI1_EN;
+ break;
+ case 2:
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT2 |
+ BRDCFG1_EMI1_EN;
+ break;
+ case 3:
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT3 |
+ BRDCFG1_EMI1_EN;
+ break;
+ case 5:
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT5 |
+ BRDCFG1_EMI1_EN;
+ break;
+ case 6:
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT6 |
+ BRDCFG1_EMI1_EN;
+ break;
+ case 7:
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT7 |
+ BRDCFG1_EMI1_EN;
+ break;
+ };
+
+ super_hydra_mdio_set_mux("SUPER_HYDRA_FM1_SGMII_MDIO",
+ mdio_mux[i].mask, mdio_mux[i].val);
+ fm_info_set_mdio(i,
+ miiphy_get_dev_by_name("SUPER_HYDRA_FM1_SGMII_MDIO"));
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ /*
+ * FM1 DTSEC5 is routed via EC1 to the first on-board
+ * RGMII port. FM2 DTSEC5 is routed via EC2 to the
+ * second on-board RGMII port. The other DTSECs cannot
+ * be routed to RGMII.
+ */
+ debug("FM1@DTSEC%u is RGMII at address %u\n",
+ idx + 1, 0);
+ fm_info_set_phy_address(i, 0);
+ mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK;
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_RGMII |
+ BRDCFG1_EMI1_EN;
+ super_hydra_mdio_set_mux("SUPER_HYDRA_RGMII_MDIO",
+ mdio_mux[i].mask, mdio_mux[i].val);
+ fm_info_set_mdio(i,
+ miiphy_get_dev_by_name("SUPER_HYDRA_RGMII_MDIO"));
+ break;
+ case PHY_INTERFACE_MODE_NONE:
+ fm_info_set_phy_address(i, 0);
+ break;
+ default:
+ printf("Fman1: DTSEC%u set to unknown interface %i\n",
+ idx + 1, fm_info_get_enet_if(i));
+ fm_info_set_phy_address(i, 0);
+ break;
+ }
+ }
+
+ /*
+ * For 10G, we only support one XAUI card per Fman. If present, then we
+ * force its routing and never touch those bits again, which removes the
+ * need for Linux to do any muxing. This works because of the way
+ * BRDCFG1 is defined, but it's a bit hackish.
+ *
+ * The PHY address for the XAUI card depends on which slot it's in. The
+ * macros we use imply that the PHY address is based on which FM, but
+ * that's not true. On the P4080DS, FM1 could only use XAUI in slot 5,
+ * and FM2 could only use a XAUI in slot 4. On the Hydra board, we
+ * check the actual slot and just use the macros as-is, even though
+ * the P3041 and P5020 only have one Fman.
+ */
+ lane = serdes_get_first_lane(XAUI_FM1);
+ if (lane >= 0) {
+ debug("FM1@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]);
+ mdio_mux[FM1_10GEC1].mask = BRDCFG1_EMI2_SEL_MASK;
+ mdio_mux[FM1_10GEC1].val = BRDCFG1_EMI2_SEL_SLOT2;
+ super_hydra_mdio_set_mux("SUPER_HYDRA_FM1_TGEC_MDIO",
+ mdio_mux[i].mask, mdio_mux[i].val);
+ }
+
+ fm_info_set_mdio(FM1_10GEC1,
+ miiphy_get_dev_by_name("SUPER_HYDRA_FM1_TGEC_MDIO"));
+
+#if (CONFIG_SYS_NUM_FMAN == 2)
+ for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
+ int idx = i - FM2_DTSEC1;
+
+ switch (fm_info_get_enet_if(i)) {
+ case PHY_INTERFACE_MODE_SGMII:
+ lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx);
+ if (lane < 0)
+ break;
+ slot = lane_to_slot[lane];
+ mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK;
+ debug("FM2@DTSEC%u expects SGMII in slot %u\n",
+ idx + 1, slot);
+ switch (slot) {
+ case 1:
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT1 |
+ BRDCFG1_EMI1_EN;
+ break;
+ case 2:
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT2 |
+ BRDCFG1_EMI1_EN;
+ break;
+ case 3:
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT3 |
+ BRDCFG1_EMI1_EN;
+ break;
+ case 5:
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT5 |
+ BRDCFG1_EMI1_EN;
+ break;
+ case 6:
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT6 |
+ BRDCFG1_EMI1_EN;
+ break;
+ case 7:
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT7 |
+ BRDCFG1_EMI1_EN;
+ break;
+ };
+
+ super_hydra_mdio_set_mux("SUPER_HYDRA_FM2_SGMII_MDIO",
+ mdio_mux[i].mask, mdio_mux[i].val);
+ fm_info_set_mdio(i,
+ miiphy_get_dev_by_name("SUPER_HYDRA_FM2_SGMII_MDIO"));
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ /*
+ * FM1 DTSEC5 is routed via EC1 to the first on-board
+ * RGMII port. FM2 DTSEC5 is routed via EC2 to the
+ * second on-board RGMII port. The other DTSECs cannot
+ * be routed to RGMII.
+ */
+ debug("FM2@DTSEC%u is RGMII at address %u\n",
+ idx + 1, 1);
+ fm_info_set_phy_address(i, 1);
+ mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK;
+ mdio_mux[i].val = BRDCFG1_EMI1_SEL_RGMII |
+ BRDCFG1_EMI1_EN;
+ super_hydra_mdio_set_mux("SUPER_HYDRA_RGMII_MDIO",
+ mdio_mux[i].mask, mdio_mux[i].val);
+ fm_info_set_mdio(i,
+ miiphy_get_dev_by_name("SUPER_HYDRA_RGMII_MDIO"));
+ break;
+ case PHY_INTERFACE_MODE_NONE:
+ fm_info_set_phy_address(i, 0);
+ break;
+ default:
+ printf("Fman2: DTSEC%u set to unknown interface %i\n",
+ idx + 1, fm_info_get_enet_if(i));
+ fm_info_set_phy_address(i, 0);
+ break;
+ }
+ }
+
+ /*
+ * For 10G, we only support one XAUI card per Fman. If present, then we
+ * force its routing and never touch those bits again, which removes the
+ * need for Linux to do any muxing. This works because of the way
+ * BRDCFG1 is defined, but it's a bit hackish.
+ *
+ * The PHY address for the XAUI card depends on which slot it's in. The
+ * macros we use imply that the PHY address is based on which FM, but
+ * that's not true. On the P4080DS, FM1 could only use XAUI in slot 5,
+ * and FM2 could only use a XAUI in slot 4. On the Hydra board, we
+ * check the actual slot and just use the macros as-is, even though
+ * the P3041 and P5020 only have one Fman.
+ */
+ lane = serdes_get_first_lane(XAUI_FM2);
+ if (lane >= 0) {
+ debug("FM2@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]);
+ mdio_mux[FM2_10GEC1].mask = BRDCFG1_EMI2_SEL_MASK;
+ mdio_mux[FM2_10GEC1].val = BRDCFG1_EMI2_SEL_SLOT1;
+ super_hydra_mdio_set_mux("SUPER_HYDRA_FM2_TGEC_MDIO",
+ mdio_mux[i].mask, mdio_mux[i].val);
+ }
+
+ fm_info_set_mdio(FM2_10GEC1,
+ miiphy_get_dev_by_name("SUPER_HYDRA_FM2_TGEC_MDIO"));
+
+#endif
+
+ cpu_eth_init(bis);
+#endif
+
+ return pci_eth_init(bis);
+}
diff --git a/board/freescale/corenet_ds/p5040ds_ddr.c b/board/freescale/corenet_ds/p5040ds_ddr.c
new file mode 100644
index 0000000..e65de36
--- /dev/null
+++ b/board/freescale/corenet_ds/p5040ds_ddr.c
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <asm/fsl_ddr_sdram.h>
+
+fixed_ddr_parm_t fixed_ddr_parm_0[] = {
+ {0, 0, NULL}
+};
+
+fixed_ddr_parm_t fixed_ddr_parm_1[] = {
+ {0, 0, NULL}
+};
diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c
index a275d3a..418c06b 100644
--- a/board/freescale/mpc8540ads/mpc8540ads.c
+++ b/board/freescale/mpc8540ads/mpc8540ads.c
@@ -184,7 +184,7 @@ void lbc_sdram_init(void)
phys_size_t fixed_sdram(void)
{
#ifndef CONFIG_SYS_RAMBOOT
- volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+ volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR);
ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c
index 285edbc..a4f48bb 100644
--- a/board/freescale/mpc8560ads/mpc8560ads.c
+++ b/board/freescale/mpc8560ads/mpc8560ads.c
@@ -389,7 +389,7 @@ void lbc_sdram_init(void)
phys_size_t fixed_sdram(void)
{
#ifndef CONFIG_SYS_RAMBOOT
- volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+ volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR);
ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c
index d119c65..0d3b418 100644
--- a/board/freescale/mpc8569mds/mpc8569mds.c
+++ b/board/freescale/mpc8569mds/mpc8569mds.c
@@ -247,7 +247,7 @@ int checkboard (void)
#if !defined(CONFIG_SPD_EEPROM)
phys_size_t fixed_sdram(void)
{
- volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+ volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
uint d_init;
out_be32(&ddr->cs0_bnds, CONFIG_SYS_DDR_CS0_BNDS);
diff --git a/board/freescale/mx31pdk/mx31pdk.c b/board/freescale/mx31pdk/mx31pdk.c
index 9f8bc53..bc60632 100644
--- a/board/freescale/mx31pdk/mx31pdk.c
+++ b/board/freescale/mx31pdk/mx31pdk.c
@@ -30,8 +30,9 @@
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
#include <watchdog.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <fsl_pmic.h>
+#include <errno.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -83,10 +84,15 @@ int board_late_init(void)
{
u32 val;
struct pmic *p;
+ int ret;
- pmic_init();
- p = get_pmic();
+ ret = pmic_init(I2C_PMIC);
+ if (ret)
+ return ret;
+ p = pmic_get("FSL_PMIC");
+ if (!p)
+ return -ENODEV;
/* Enable RTC battery */
pmic_reg_read(p, REG_POWER_CTL0, &val);
pmic_reg_write(p, REG_POWER_CTL0, val | COINCHEN);
diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c
index 4d8f2f5..2aa000f 100644
--- a/board/freescale/mx35pdk/mx35pdk.c
+++ b/board/freescale/mx35pdk/mx35pdk.c
@@ -31,7 +31,7 @@
#include <asm/arch/mx35_pins.h>
#include <asm/arch/iomux.h>
#include <i2c.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <fsl_pmic.h>
#include <mmc.h>
#include <fsl_esdhc.h>
@@ -228,7 +228,9 @@ int board_init(void)
static inline int pmic_detect(void)
{
unsigned int id;
- struct pmic *p = get_pmic();
+ struct pmic *p = pmic_get("FSL_PMIC");
+ if (!p)
+ return -ENODEV;
pmic_reg_read(p, REG_IDENTIFICATION, &id);
@@ -252,10 +254,14 @@ int board_late_init(void)
u8 val;
u32 pmic_val;
struct pmic *p;
+ int ret;
+
+ ret = pmic_init(I2C_PMIC);
+ if (ret)
+ return ret;
- pmic_init();
if (pmic_detect()) {
- p = get_pmic();
+ p = pmic_get("FSL_PMIC");
mxc_request_iomux(MX35_PIN_WATCHDOG_RST, MUX_CONFIG_SION |
MUX_CONFIG_ALT1);
diff --git a/board/freescale/mx51evk/Makefile b/board/freescale/mx51evk/Makefile
index 224eaa3..2310fe1 100644
--- a/board/freescale/mx51evk/Makefile
+++ b/board/freescale/mx51evk/Makefile
@@ -23,8 +23,10 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
-COBJS := mx51evk.o
+COBJS-y += mx51evk.o
+COBJS-$(CONFIG_VIDEO) += mx51evk_video.o
+COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index 421d8c2..d1ef431 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -30,19 +30,14 @@
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
+#include <asm/imx-common/mx5_video.h>
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <fsl_pmic.h>
#include <mc13892.h>
#include <usb/ehci-fsl.h>
-#include <linux/fb.h>
-#include <ipu_pixfmt.h>
-
-#define MX51EVK_LCD_3V3 IMX_GPIO_NR(4, 9)
-#define MX51EVK_LCD_5V IMX_GPIO_NR(4, 10)
-#define MX51EVK_LCD_BACKLIGHT IMX_GPIO_NR(3, 4)
DECLARE_GLOBAL_DATA_PTR;
@@ -252,9 +247,15 @@ static void power_init(void)
unsigned int val;
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
struct pmic *p;
+ int ret;
+
+ ret = pmic_init(I2C_PMIC);
+ if (ret)
+ return;
- pmic_init();
- p = get_pmic();
+ p = pmic_get("FSL_PMIC");
+ if (!p)
+ return;
/* Write needed to Power Gate 2 register */
pmic_reg_read(p, REG_POWER_MISC, &val);
@@ -471,54 +472,6 @@ int board_mmc_init(bd_t *bis)
}
#endif
-static struct fb_videomode const claa_wvga = {
- .name = "CLAA07LC0ACW",
- .refresh = 57,
- .xres = 800,
- .yres = 480,
- .pixclock = 37037,
- .left_margin = 40,
- .right_margin = 60,
- .upper_margin = 10,
- .lower_margin = 10,
- .hsync_len = 20,
- .vsync_len = 10,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED
-};
-
-void lcd_iomux(void)
-{
- /* DI2_PIN15 */
- mxc_request_iomux(MX51_PIN_DI_GP4, IOMUX_CONFIG_ALT4);
-
- /* Pad settings for MX51_PIN_DI2_DISP_CLK */
- mxc_iomux_set_pad(MX51_PIN_DI2_DISP_CLK, PAD_CTL_HYS_NONE |
- PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
- PAD_CTL_DRV_MAX | PAD_CTL_SRE_SLOW);
-
- /* Turn on 3.3V voltage for LCD */
- mxc_request_iomux(MX51_PIN_CSI2_D12, IOMUX_CONFIG_ALT3);
- gpio_direction_output(MX51EVK_LCD_3V3, 1);
-
- /* Turn on 5V voltage for LCD */
- mxc_request_iomux(MX51_PIN_CSI2_D13, IOMUX_CONFIG_ALT3);
- gpio_direction_output(MX51EVK_LCD_5V, 1);
-
- /* Turn on GPIO backlight */
- mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4);
- mxc_iomux_set_input(MX51_GPIO3_IPP_IND_G_IN_4_SELECT_INPUT,
- INPUT_CTL_PATH1);
- gpio_direction_output(MX51EVK_LCD_BACKLIGHT, 1);
-}
-
-void lcd_enable(void)
-{
- int ret = ipuv3_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565);
- if (ret)
- printf("LCD cannot be configured: %d\n", ret);
-}
-
int board_early_init_f(void)
{
setup_iomux_uart();
@@ -526,7 +479,7 @@ int board_early_init_f(void)
#ifdef CONFIG_USB_EHCI_MX5
setup_usb_h1();
#endif
- lcd_iomux();
+ setup_iomux_lcd();
return 0;
}
diff --git a/board/freescale/mx51evk/mx51evk_video.c b/board/freescale/mx51evk/mx51evk_video.c
new file mode 100644
index 0000000..f036cf7
--- /dev/null
+++ b/board/freescale/mx51evk/mx51evk_video.c
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/list.h>
+#include <asm/gpio.h>
+#include <asm/arch/iomux.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+
+#define MX51EVK_LCD_3V3 IMX_GPIO_NR(4, 9)
+#define MX51EVK_LCD_5V IMX_GPIO_NR(4, 10)
+#define MX51EVK_LCD_BACKLIGHT IMX_GPIO_NR(3, 4)
+
+static struct fb_videomode const claa_wvga = {
+ .name = "CLAA07LC0ACW",
+ .refresh = 57,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 37037,
+ .left_margin = 40,
+ .right_margin = 60,
+ .upper_margin = 10,
+ .lower_margin = 10,
+ .hsync_len = 20,
+ .vsync_len = 10,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED
+};
+
+void setup_iomux_lcd(void)
+{
+ /* DI2_PIN15 */
+ mxc_request_iomux(MX51_PIN_DI_GP4, IOMUX_CONFIG_ALT4);
+
+ /* Pad settings for MX51_PIN_DI2_DISP_CLK */
+ mxc_iomux_set_pad(MX51_PIN_DI2_DISP_CLK, PAD_CTL_HYS_NONE |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_PUE_KEEPER |
+ PAD_CTL_DRV_MAX | PAD_CTL_SRE_SLOW);
+
+ /* Turn on 3.3V voltage for LCD */
+ mxc_request_iomux(MX51_PIN_CSI2_D12, IOMUX_CONFIG_ALT3);
+ gpio_direction_output(MX51EVK_LCD_3V3, 1);
+
+ /* Turn on 5V voltage for LCD */
+ mxc_request_iomux(MX51_PIN_CSI2_D13, IOMUX_CONFIG_ALT3);
+ gpio_direction_output(MX51EVK_LCD_5V, 1);
+
+ /* Turn on GPIO backlight */
+ mxc_request_iomux(MX51_PIN_DI1_D1_CS, IOMUX_CONFIG_ALT4);
+ mxc_iomux_set_input(MX51_GPIO3_IPP_IND_G_IN_4_SELECT_INPUT,
+ INPUT_CTL_PATH1);
+ gpio_direction_output(MX51EVK_LCD_BACKLIGHT, 1);
+}
+
+void lcd_enable(void)
+{
+ int ret = ipuv3_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565);
+ if (ret)
+ printf("LCD cannot be configured: %d\n", ret);
+}
diff --git a/board/freescale/mx53evk/mx53evk.c b/board/freescale/mx53evk/mx53evk.c
index bb4621d..1273501 100644
--- a/board/freescale/mx53evk/mx53evk.c
+++ b/board/freescale/mx53evk/mx53evk.c
@@ -34,7 +34,7 @@
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <fsl_pmic.h>
#include <asm/gpio.h>
#include <mc13892.h>
@@ -123,9 +123,15 @@ void power_init(void)
{
unsigned int val;
struct pmic *p;
+ int ret;
+
+ ret = pmic_init(I2C_PMIC);
+ if (ret)
+ return;
- pmic_init();
- p = get_pmic();
+ p = pmic_get("FSL_PMIC");
+ if (!p)
+ return;
/* Set VDDA to 1.25V */
pmic_reg_read(p, REG_SW_2, &val);
diff --git a/board/freescale/mx53loco/Makefile b/board/freescale/mx53loco/Makefile
index 8bc69a9..3be17c5 100644
--- a/board/freescale/mx53loco/Makefile
+++ b/board/freescale/mx53loco/Makefile
@@ -22,8 +22,10 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
-COBJS := mx53loco.o
+COBJS-y += mx53loco.o
+COBJS-$(CONFIG_VIDEO) += mx53loco_video.o
+COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
index a11e883..81c511c 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -31,12 +31,13 @@
#include <asm/arch/iomux.h>
#include <asm/arch/clock.h>
#include <asm/errno.h>
+#include <asm/imx-common/mx5_video.h>
#include <netdev.h>
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <asm/gpio.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <dialog_pmic.h>
#include <fsl_pmic.h>
#include <linux/fb.h>
@@ -344,10 +345,16 @@ static int power_init(void)
unsigned int val;
int ret = -1;
struct pmic *p;
+ int retval;
if (!i2c_probe(CONFIG_SYS_DIALOG_PMIC_I2C_ADDR)) {
- pmic_dialog_init();
- p = get_pmic();
+ retval = pmic_dialog_init(I2C_PMIC);
+ if (retval)
+ return retval;
+
+ p = pmic_get("DIALOG_PMIC");
+ if (!p)
+ return -ENODEV;
/* Set VDDA to 1.25V */
val = DA9052_BUCKCORE_BCOREEN | DA_BUCKCORE_VBCORE_1_250V;
@@ -363,8 +370,13 @@ static int power_init(void)
}
if (!i2c_probe(CONFIG_SYS_FSL_PMIC_I2C_ADDR)) {
- pmic_init();
- p = get_pmic();
+ retval = pmic_init(I2C_PMIC);
+ if (retval)
+ return retval;
+
+ p = pmic_get("DIALOG_PMIC");
+ if (!p)
+ return -ENODEV;
/* Set VDDGP to 1.25V for 1GHz on SW1 */
pmic_reg_read(p, REG_SW_0, &val);
@@ -412,74 +424,11 @@ static void clock_1GHz(void)
printf("CPU: Switch DDR clock to 400MHz failed\n");
}
-static struct fb_videomode const claa_wvga = {
- .name = "CLAA07LC0ACW",
- .refresh = 57,
- .xres = 800,
- .yres = 480,
- .pixclock = 37037,
- .left_margin = 40,
- .right_margin = 60,
- .upper_margin = 10,
- .lower_margin = 10,
- .hsync_len = 20,
- .vsync_len = 10,
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED
-};
-
-void lcd_iomux(void)
-{
- mxc_request_iomux(MX53_PIN_DI0_DISP_CLK, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DI0_PIN15, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DI0_PIN2, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DI0_PIN3, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT0, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT1, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT2, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT3, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT4, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT5, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT6, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT7, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT8, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT9, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT10, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT11, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT12, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT13, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT14, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT15, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT16, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT17, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT18, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT19, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT20, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT21, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT22, IOMUX_CONFIG_ALT0);
- mxc_request_iomux(MX53_PIN_DISP0_DAT23, IOMUX_CONFIG_ALT0);
-
- /* Turn on GPIO backlight */
- mxc_request_iomux(MX53_PIN_EIM_D24, IOMUX_CONFIG_ALT1);
- gpio_direction_output(MX53LOCO_LCD_POWER, 1);
-
- /* Turn on display contrast */
- mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1);
- gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_1), 1);
-}
-
-void lcd_enable(void)
-{
- int ret = ipuv3_fb_init(&claa_wvga, 0, IPU_PIX_FMT_RGB565);
- if (ret)
- printf("LCD cannot be configured: %d\n", ret);
-}
-
int board_early_init_f(void)
{
setup_iomux_uart();
setup_iomux_fec();
- lcd_iomux();
+ setup_iomux_lcd();
return 0;
}
diff --git a/board/freescale/mx53loco/mx53loco_video.c b/board/freescale/mx53loco/mx53loco_video.c
new file mode 100644
index 0000000..69991e8
--- /dev/null
+++ b/board/freescale/mx53loco/mx53loco_video.c
@@ -0,0 +1,94 @@
+/*
+ * Copyright (C) 2012 Freescale Semiconductor, Inc.
+ * Fabio Estevam <fabio.estevam@freescale.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <linux/list.h>
+#include <asm/gpio.h>
+#include <asm/arch/iomux.h>
+#include <linux/fb.h>
+#include <ipu_pixfmt.h>
+
+#define MX53LOCO_LCD_POWER IMX_GPIO_NR(3, 24)
+
+static struct fb_videomode const claa_wvga = {
+ .name = "CLAA07LC0ACW",
+ .refresh = 57,
+ .xres = 800,
+ .yres = 480,
+ .pixclock = 37037,
+ .left_margin = 40,
+ .right_margin = 60,
+ .upper_margin = 10,
+ .lower_margin = 10,
+ .hsync_len = 20,
+ .vsync_len = 10,
+ .sync = 0,
+ .vmode = FB_VMODE_NONINTERLACED
+};
+
+void setup_iomux_lcd(void)
+{
+ mxc_request_iomux(MX53_PIN_DI0_DISP_CLK, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DI0_PIN15, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DI0_PIN2, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DI0_PIN3, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT0, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT1, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT2, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT3, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT4, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT5, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT6, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT7, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT8, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT9, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT10, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT11, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT12, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT13, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT14, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT15, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT16, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT17, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT18, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT19, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT20, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT21, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT22, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_DISP0_DAT23, IOMUX_CONFIG_ALT0);
+
+ /* Turn on GPIO backlight */
+ mxc_request_iomux(MX53_PIN_EIM_D24, IOMUX_CONFIG_ALT1);
+ gpio_direction_output(MX53LOCO_LCD_POWER, 1);
+
+ /* Turn on display contrast */
+ mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1);
+ gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_1), 1);
+}
+
+void lcd_enable(void)
+{
+ int ret = ipuv3_fb_init(&claa_wvga, 0, IPU_PIX_FMT_RGB565);
+ if (ret)
+ printf("LCD cannot be configured: %d\n", ret);
+}
diff --git a/board/freescale/p1023rds/p1023rds.c b/board/freescale/p1023rds/p1023rds.c
index eb11f3f..9110767 100644
--- a/board/freescale/p1023rds/p1023rds.c
+++ b/board/freescale/p1023rds/p1023rds.c
@@ -74,7 +74,7 @@ int checkboard(void)
phys_size_t fixed_sdram(void)
{
#ifndef CONFIG_SYS_RAMBOOT
- ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+ ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
set_next_law(0, LAW_SIZE_2G, LAW_TRGT_IF_DDR_1);
diff --git a/board/freescale/p1_p2_rdb_pc/Makefile b/board/freescale/p1_p2_rdb_pc/Makefile
index 0dcf7d1..5b45d72 100644
--- a/board/freescale/p1_p2_rdb_pc/Makefile
+++ b/board/freescale/p1_p2_rdb_pc/Makefile
@@ -24,11 +24,27 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
+MINIMAL=
+
+ifdef CONFIG_SPL_BUILD
+ifdef CONFIG_SPL_INIT_MINIMAL
+MINIMAL=y
+endif
+endif
+
+ifdef MINIMAL
+
+COBJS-y += spl_minimal.o tlb.o law.o
+
+else
+
COBJS-y += $(BOARD).o
COBJS-y += ddr.o
COBJS-y += law.o
COBJS-y += tlb.o
+endif
+
SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS-y))
SOBJS := $(addprefix $(obj),$(SOBJS))
diff --git a/board/freescale/p1_p2_rdb_pc/ddr.c b/board/freescale/p1_p2_rdb_pc/ddr.c
index 88ba56f..9355536 100644
--- a/board/freescale/p1_p2_rdb_pc/ddr.c
+++ b/board/freescale/p1_p2_rdb_pc/ddr.c
@@ -206,6 +206,7 @@ int fsl_ddr_get_dimm_params(dimm_params_t *pdimm,
}
#endif /* CONFIG_SYS_DDR_RAW_TIMING */
+#ifdef CONFIG_SYS_DDR_CS0_BNDS
/* Fixed sdram init -- doesn't use serial presence detect. */
phys_size_t fixed_sdram(void)
{
@@ -260,6 +261,7 @@ phys_size_t fixed_sdram(void)
return ddr_size;
}
+#endif
void fsl_ddr_board_options(memctl_options_t *popts,
dimm_params_t *pdimm,
diff --git a/board/freescale/p1_p2_rdb_pc/law.c b/board/freescale/p1_p2_rdb_pc/law.c
index 0da8300..cb5e7b7 100644
--- a/board/freescale/p1_p2_rdb_pc/law.c
+++ b/board/freescale/p1_p2_rdb_pc/law.c
@@ -32,7 +32,7 @@ struct law_entry law_table[] = {
#endif
SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_64M, LAW_TRGT_IF_LBC),
#ifdef CONFIG_SYS_NAND_BASE_PHYS
- SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC),
+ SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_32K, LAW_TRGT_IF_LBC),
#endif
};
diff --git a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
index aa39260..5b5b86c 100644
--- a/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
+++ b/board/freescale/p1_p2_rdb_pc/p1_p2_rdb_pc.c
@@ -177,7 +177,7 @@ void board_gpio_init(void)
*/
setbits_be32(&pgpio->gpdir, 0x02130000);
-#ifndef CONFIG_SYS_RAMBOOT
+#if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SPL)
/* init DDR3 reset signal */
setbits_be32(&pgpio->gpdir, 0x00200000);
setbits_be32(&pgpio->gpodr, 0x00200000);
diff --git a/board/freescale/p1_p2_rdb_pc/spl_minimal.c b/board/freescale/p1_p2_rdb_pc/spl_minimal.c
new file mode 100644
index 0000000..09019e9
--- /dev/null
+++ b/board/freescale/p1_p2_rdb_pc/spl_minimal.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <ns16550.h>
+#include <asm/io.h>
+#include <nand.h>
+#include <linux/compiler.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/global_data.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifndef CONFIG_SYS_INIT_L2_ADDR
+/*
+ * Fixed sdram init -- doesn't use serial presence detect.
+ */
+static void sdram_init(void)
+{
+ ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+
+ __raw_writel(CONFIG_SYS_DDR_CS0_BNDS, &ddr->cs0_bnds);
+ __raw_writel(CONFIG_SYS_DDR_CS0_CONFIG, &ddr->cs0_config);
+#if CONFIG_CHIP_SELECTS_PER_CTRL > 1
+ __raw_writel(CONFIG_SYS_DDR_CS1_BNDS, &ddr->cs1_bnds);
+ __raw_writel(CONFIG_SYS_DDR_CS1_CONFIG, &ddr->cs1_config);
+#endif
+ __raw_writel(CONFIG_SYS_DDR_TIMING_3, &ddr->timing_cfg_3);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_0, &ddr->timing_cfg_0);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_1, &ddr->timing_cfg_1);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_2, &ddr->timing_cfg_2);
+
+ __raw_writel(CONFIG_SYS_DDR_CONTROL_2, &ddr->sdram_cfg_2);
+ __raw_writel(CONFIG_SYS_DDR_MODE_1, &ddr->sdram_mode);
+ __raw_writel(CONFIG_SYS_DDR_MODE_2, &ddr->sdram_mode_2);
+
+ __raw_writel(CONFIG_SYS_DDR_INTERVAL, &ddr->sdram_interval);
+ __raw_writel(CONFIG_SYS_DDR_DATA_INIT, &ddr->sdram_data_init);
+ __raw_writel(CONFIG_SYS_DDR_CLK_CTRL, &ddr->sdram_clk_cntl);
+
+ __raw_writel(CONFIG_SYS_DDR_TIMING_4, &ddr->timing_cfg_4);
+ __raw_writel(CONFIG_SYS_DDR_TIMING_5, &ddr->timing_cfg_5);
+ __raw_writel(CONFIG_SYS_DDR_ZQ_CONTROL, &ddr->ddr_zq_cntl);
+ __raw_writel(CONFIG_SYS_DDR_WRLVL_CONTROL, &ddr->ddr_wrlvl_cntl);
+
+ /* Set, but do not enable the memory */
+ __raw_writel(CONFIG_SYS_DDR_CONTROL & ~SDRAM_CFG_MEM_EN, &ddr->sdram_cfg);
+
+ asm volatile("sync;isync");
+ udelay(500);
+
+ /* Let the controller go */
+ out_be32(&ddr->sdram_cfg, in_be32(&ddr->sdram_cfg) | SDRAM_CFG_MEM_EN);
+
+ set_next_law(0, CONFIG_SYS_SDRAM_SIZE_LAW, LAW_TRGT_IF_DDR_1);
+}
+#endif
+
+void board_init_f(ulong bootflag)
+{
+ u32 plat_ratio;
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+#ifndef CONFIG_QE
+ ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
+#endif
+
+ /* initialize selected port with appropriate baud rate */
+ plat_ratio = in_be32(&gur->porpllsr) & MPC85xx_PORPLLSR_PLAT_RATIO;
+ plat_ratio >>= 1;
+ gd->bus_clk = CONFIG_SYS_CLK_FREQ * plat_ratio;
+
+ NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
+ gd->bus_clk / 16 / CONFIG_BAUDRATE);
+
+ puts("\nNAND boot... ");
+
+#ifndef CONFIG_QE
+ /* init DDR3 reset signal */
+ __raw_writel(0x02000000, &pgpio->gpdir);
+ __raw_writel(0x00200000, &pgpio->gpodr);
+ __raw_writel(0x00000000, &pgpio->gpdat);
+ udelay(1000);
+ __raw_writel(0x00200000, &pgpio->gpdat);
+ udelay(1000);
+ __raw_writel(0x00000000, &pgpio->gpdir);
+#endif
+
+#ifndef CONFIG_SYS_INIT_L2_ADDR
+ /* Initialize the DDR3 */
+ sdram_init();
+#endif
+
+ /* copy code to RAM and jump to it - this should not return */
+ /* NOTE - code has to be copied out of NAND buffer before
+ * other blocks can be read.
+ */
+ relocate_code(CONFIG_SPL_RELOC_STACK, 0, CONFIG_SPL_RELOC_TEXT_BASE);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+ nand_boot();
+}
+
+void putc(char c)
+{
+ if (c == '\n')
+ NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
+
+ NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
+}
+
+void puts(const char *str)
+{
+ while (*str)
+ putc(*str++);
+}
diff --git a/board/freescale/p1_p2_rdb_pc/tlb.c b/board/freescale/p1_p2_rdb_pc/tlb.c
index 6d22463..3e4dffd 100644
--- a/board/freescale/p1_p2_rdb_pc/tlb.c
+++ b/board/freescale/p1_p2_rdb_pc/tlb.c
@@ -53,7 +53,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 1, BOOKE_PAGESZ_1M, 1),
-#ifndef CONFIG_NAND_SPL
+#ifndef CONFIG_SPL_BUILD
/* W**G* - Flash/promjet, localbus */
/* This will be changed to *I*G* after relocation to RAM. */
SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
@@ -85,7 +85,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
SET_TLB_ENTRY(1, CONFIG_SYS_PMC_BASE, CONFIG_SYS_PMC_BASE_PHYS,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 10, BOOKE_PAGESZ_64K, 1),
-#endif
+#endif /* not SPL */
#ifdef CONFIG_SYS_NAND_BASE
/* *I*G - NAND */
@@ -94,7 +94,17 @@ struct fsl_e_tlb_entry tlb_table[] = {
0, 7, BOOKE_PAGESZ_1M, 1),
#endif
-#ifdef CONFIG_SYS_RAMBOOT
+#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_SPL)
+#ifdef CONFIG_SYS_INIT_L2_ADDR
+ /* L2SRAM */
+ SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 8, BOOKE_PAGESZ_256K, 1),
+ SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000,
+ CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000,
+ MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+ 0, 12, BOOKE_PAGESZ_256K, 1),
+#else
/* *I*G - eSDHC/eSPI/NAND boot */
SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
MAS3_SX|MAS3_SW|MAS3_SR, 0,
@@ -106,9 +116,9 @@ struct fsl_e_tlb_entry tlb_table[] = {
CONFIG_SYS_DDR_SDRAM_BASE + 0x40000000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 9, BOOKE_PAGESZ_1G, 1),
-#endif
-#endif
-
+#endif /* P1020MBG */
+#endif /* not L2 SRAM */
+#endif /* RAMBOOT/SPL */
};
int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c
index 3188f59..d4a4451 100644
--- a/board/freescale/p2020ds/p2020ds.c
+++ b/board/freescale/p2020ds/p2020ds.c
@@ -84,7 +84,7 @@ int checkboard(void)
phys_size_t fixed_sdram(void)
{
- volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+ volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
uint d_init;
ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
diff --git a/board/genesi/mx51_efikamx/efikamx.c b/board/genesi/mx51_efikamx/efikamx.c
index c2b2823..69d41db 100644
--- a/board/genesi/mx51_efikamx/efikamx.c
+++ b/board/genesi/mx51_efikamx/efikamx.c
@@ -33,7 +33,7 @@
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <fsl_pmic.h>
#include <mc13892.h>
@@ -173,9 +173,15 @@ static void power_init(void)
unsigned int val;
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
struct pmic *p;
+ int ret;
+
+ ret = pmic_init(I2C_PMIC);
+ if (ret)
+ return;
- pmic_init();
- p = get_pmic();
+ p = pmic_get("FSL_PMIC");
+ if (!p)
+ return;
/* Write needed to Power Gate 2 register */
pmic_reg_read(p, REG_POWER_MISC, &val);
diff --git a/board/gw8260/gw8260.c b/board/gw8260/gw8260.c
index 77a1e1d..64c54d5 100644
--- a/board/gw8260/gw8260.c
+++ b/board/gw8260/gw8260.c
@@ -544,15 +544,11 @@ int mem_test_walk (void)
/*********************************************************************/
int testdram (void)
{
- char *s;
int rundata, runaddress, runwalk;
- s = getenv ("testdramdata");
- rundata = (s && (*s == 'y')) ? 1 : 0;
- s = getenv ("testdramaddress");
- runaddress = (s && (*s == 'y')) ? 1 : 0;
- s = getenv ("testdramwalk");
- runwalk = (s && (*s == 'y')) ? 1 : 0;
+ rundata = getenv_yesno("testdramdata") == 1;
+ runaddress = getenv_yesno("testdramaddress") == 1;
+ runwalk = getenv_yesno("testdramwalk") == 1;
if ((rundata == 1) || (runaddress == 1) || (runwalk == 1)) {
printf ("Testing RAM ... ");
diff --git a/board/hale/tt01/tt01.c b/board/hale/tt01/tt01.c
index 143fcef..0c2cb79 100644
--- a/board/hale/tt01/tt01.c
+++ b/board/hale/tt01/tt01.c
@@ -25,12 +25,13 @@
#include <common.h>
#include <netdev.h>
#include <command.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <fsl_pmic.h>
#include <mc13783.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
+#include <errno.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -195,14 +196,21 @@ int board_mmc_init(bd_t *bis)
{
u32 val;
struct pmic *p;
+ int ret;
/*
* this is the first driver to use the pmic, so call
* pmic_init() here. board_late_init() is too late for
* the MMC driver.
*/
- pmic_init();
- p = get_pmic();
+
+ ret = pmic_init(I2C_PMIC);
+ if (ret)
+ return ret;
+
+ p = pmic_get("FSL_PMIC");
+ if (!p)
+ return -ENODEV;
/* configure pins for SDHC1 only */
mx31_gpio_mux(IOMUX_MODE(MUX_CTL_SD1_CLK, MUX_CTL_FUNC));
diff --git a/board/iomega/iconnect/iconnect.c b/board/iomega/iconnect/iconnect.c
index 6ee2128..8cfb4e6 100644
--- a/board/iomega/iconnect/iconnect.c
+++ b/board/iomega/iconnect/iconnect.c
@@ -1,7 +1,7 @@
/*
* Copyright (C) 2009-2012
* Wojciech Dubowik <wojciech.dubowik@neratec.com>
- * Luka Perkov <uboot@lukaperkov.net>
+ * Luka Perkov <luka@openwrt.org>
*
* See file CREDITS for list of people who contributed to this
* project.
diff --git a/board/iomega/iconnect/iconnect.h b/board/iomega/iconnect/iconnect.h
index 2fb3e5e..8b6fe1b 100644
--- a/board/iomega/iconnect/iconnect.h
+++ b/board/iomega/iconnect/iconnect.h
@@ -1,7 +1,7 @@
/*
* Copyright (C) 2009-2012
* Wojciech Dubowik <wojciech.dubowik@neratec.com>
- * Luka Perkov <uboot@lukaperkov.net>
+ * Luka Perkov <luka@openwrt.org>
*
* See file CREDITS for list of people who contributed to this
* project.
diff --git a/board/iomega/iconnect/kwbimage.cfg b/board/iomega/iconnect/kwbimage.cfg
index 6c9dfe3..4b64dab 100644
--- a/board/iomega/iconnect/kwbimage.cfg
+++ b/board/iomega/iconnect/kwbimage.cfg
@@ -1,7 +1,7 @@
#
# (C) Copyright 2009-2012
# Wojciech Dubowik <wojciech.dubowik@neratec.com>
-# Luka Perkov <uboot@lukaperkov.net>
+# Luka Perkov <luka@openwrt.org>
#
# See file CREDITS for list of people who contributed to this
# project.
diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c
index d316f33..0b3721e 100644
--- a/board/logicpd/am3517evm/am3517evm.c
+++ b/board/logicpd/am3517evm/am3517evm.c
@@ -25,12 +25,20 @@
#include <common.h>
#include <asm/io.h>
+#include <asm/omap_musb.h>
+#include <asm/arch/am35x_def.h>
#include <asm/arch/mem.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/musb.h>
#include <asm/mach-types.h>
+#include <asm/errno.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/musb.h>
#include <i2c.h>
+#include <netdev.h>
#include "am3517evm.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -50,6 +58,52 @@ int board_init(void)
return 0;
}
+#ifdef CONFIG_USB_MUSB_AM35X
+static struct musb_hdrc_config musb_config = {
+ .multipoint = 1,
+ .dyn_fifo = 1,
+ .num_eps = 16,
+ .ram_bits = 12,
+};
+
+static struct omap_musb_board_data musb_board_data = {
+ .set_phy_power = am35x_musb_phy_power,
+ .clear_irq = am35x_musb_clear_irq,
+ .reset = am35x_musb_reset,
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_MUSB_HOST)
+ .mode = MUSB_HOST,
+#elif defined(CONFIG_MUSB_GADGET)
+ .mode = MUSB_PERIPHERAL,
+#else
+#error "Please define either CONFIG_MUSB_HOST or CONFIG_MUSB_GADGET"
+#endif
+ .config = &musb_config,
+ .power = 250,
+ .platform_ops = &am35x_ops,
+ .board_data = &musb_board_data,
+};
+
+static void am3517_evm_musb_init(void)
+{
+ /*
+ * Set up USB clock/mode in the DEVCONF2 register.
+ * USB2.0 PHY reference clock is 13 MHz
+ */
+ clrsetbits_le32(&am35x_scm_general_regs->devconf2,
+ CONF2_REFFREQ | CONF2_OTGMODE | CONF2_PHY_GPIOMODE,
+ CONF2_REFFREQ_13MHZ | CONF2_SESENDEN |
+ CONF2_VBDTCTEN | CONF2_DATPOL);
+
+ musb_register(&musb_plat, &musb_board_data,
+ (void *)AM35XX_IPSS_USBOTGSS_BASE);
+}
+#else
+#define am3517_evm_musb_init() do {} while (0)
+#endif
+
/*
* Routine: misc_init_r
* Description: Init i2c, ethernet, etc... (done here so udelay works)
@@ -62,6 +116,8 @@ int misc_init_r(void)
dieid_num_r();
+ am3517_evm_musb_init();
+
return 0;
}
@@ -83,3 +139,21 @@ int board_mmc_init(bd_t *bis)
return 0;
}
#endif
+
+#if defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)
+int board_eth_init(bd_t *bis)
+{
+ int rv, n = 0;
+
+ rv = cpu_eth_init(bis);
+ if (rv > 0)
+ n += rv;
+
+ rv = usb_eth_initialize(bis);
+ if (rv > 0)
+ n += rv;
+
+ return n;
+}
+#endif
+
diff --git a/board/prodrive/p3mx/p3mx.c b/board/prodrive/p3mx/p3mx.c
index 389affc..c3fd191 100644
--- a/board/prodrive/p3mx/p3mx.c
+++ b/board/prodrive/p3mx/p3mx.c
@@ -768,22 +768,18 @@ int mem_test_walk (void)
/*********************************************************************/
int testdram (void)
{
- char *s;
int rundata = 0;
int runaddress = 0;
int runwalk = 0;
#ifdef CONFIG_SYS_DRAM_TEST_DATA
- s = getenv ("testdramdata");
- rundata = (s && (*s == 'y')) ? 1 : 0;
+ rundata = getenv_yesno("testdramdata") == 1;
#endif
#ifdef CONFIG_SYS_DRAM_TEST_ADDRESS
- s = getenv ("testdramaddress");
- runaddress = (s && (*s == 'y')) ? 1 : 0;
+ runaddress = getenv_yesno("testdramaddress") == 1;
#endif
#ifdef CONFIG_SYS_DRAM_TEST_WALK
- s = getenv ("testdramwalk");
- runwalk = (s && (*s == 'y')) ? 1 : 0;
+ runwalk = getenv_yesno("testdramwalk") == 1;
#endif
if ((rundata == 1) || (runaddress == 1) || (runwalk == 1))
diff --git a/board/raidsonic/ib62x0/ib62x0.c b/board/raidsonic/ib62x0/ib62x0.c
index b7e6e41..5f0f396 100644
--- a/board/raidsonic/ib62x0/ib62x0.c
+++ b/board/raidsonic/ib62x0/ib62x0.c
@@ -1,7 +1,7 @@
/*
* Copyright (C) 2011-2012
* Gerald Kerma <dreagle@doukki.net>
- * Luka Perkov <uboot@lukaperkov.net>
+ * Luka Perkov <luka@openwrt.org>
* Simon Baatz <gmbnomis@gmail.com>
*
* See file CREDITS for list of people who contributed to this
diff --git a/board/raidsonic/ib62x0/ib62x0.h b/board/raidsonic/ib62x0/ib62x0.h
index 0118c2b..3315696 100644
--- a/board/raidsonic/ib62x0/ib62x0.h
+++ b/board/raidsonic/ib62x0/ib62x0.h
@@ -2,7 +2,7 @@
* Copyright (C) 2011-2012
* Gerald Kerma <dreagle@doukki.net>
* Simon Baatz <gmbnomis@gmail.com>
- * Luka Perkov <uboot@lukaperkov.net>
+ * Luka Perkov <luka@openwrt.org>
*
* See file CREDITS for list of people who contributed to this
* project.
diff --git a/board/raidsonic/ib62x0/kwbimage.cfg b/board/raidsonic/ib62x0/kwbimage.cfg
index bd594eb..bade627 100644
--- a/board/raidsonic/ib62x0/kwbimage.cfg
+++ b/board/raidsonic/ib62x0/kwbimage.cfg
@@ -2,7 +2,7 @@
# Copyright (C) 2011-2012
# Gerald Kerma <dreagle@doukki.net>
# Simon Baatz <gmbnomis@gmail.com>
-# Luka Perkov <uboot@lukaperkov.net>
+# Luka Perkov <luka@openwrt.org>
#
# See file CREDITS for list of people who contributed to this
# project.
diff --git a/board/samsung/goni/goni.c b/board/samsung/goni/goni.c
index e8fb1ea..ff76963 100644
--- a/board/samsung/goni/goni.c
+++ b/board/samsung/goni/goni.c
@@ -25,10 +25,10 @@
#include <common.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <usb/s3c_udc.h>
#include <asm/arch/cpu.h>
-#include <max8998_pmic.h>
+#include <power/max8998_pmic.h>
DECLARE_GLOBAL_DATA_PTR;
static struct s5pc110_gpio *s5pc110_gpio;
@@ -41,9 +41,17 @@ int board_init(void)
gd->bd->bi_arch_number = MACH_TYPE_GONI;
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-#if defined(CONFIG_PMIC)
- pmic_init();
-#endif
+ return 0;
+}
+
+int power_init_board(void)
+{
+ int ret;
+
+ ret = pmic_init(I2C_5);
+ if (ret)
+ return ret;
+
return 0;
}
@@ -108,7 +116,9 @@ static int s5pc1xx_phy_control(int on)
{
int ret;
static int status;
- struct pmic *p = get_pmic();
+ struct pmic *p = pmic_get("MAX8998_PMIC");
+ if (!p)
+ return -ENODEV;
if (pmic_probe(p))
return -1;
diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index d5c681c..4724029 100644
--- a/board/samsung/trats/trats.c
+++ b/board/samsung/trats/trats.c
@@ -35,10 +35,13 @@
#include <asm/arch/mipi_dsim.h>
#include <asm/arch/watchdog.h>
#include <asm/arch/power.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <usb/s3c_udc.h>
-#include <max8997_pmic.h>
+#include <power/max8997_pmic.h>
#include <libtizen.h>
+#include <power/max8997_muic.h>
+#include <power/battery.h>
+#include <power/max17042_fg.h>
#include "setup.h"
@@ -69,10 +72,6 @@ int board_init(void)
check_hw_revision();
printf("HW Revision:\t0x%x\n", board_rev);
-#if defined(CONFIG_PMIC)
- pmic_init();
-#endif
-
return 0;
}
@@ -91,6 +90,275 @@ void i2c_init_board(void)
s5p_gpio_direction_output(&gpio2->y4, 1, 1);
}
+static void trats_low_power_mode(void)
+{
+ struct exynos4_clock *clk =
+ (struct exynos4_clock *)samsung_get_base_clock();
+ struct exynos4_power *pwr =
+ (struct exynos4_power *)samsung_get_base_power();
+
+ /* Power down CORE1 */
+ /* LOCAL_PWR_CFG [1:0] 0x3 EN, 0x0 DIS */
+ writel(0x0, &pwr->arm_core1_configuration);
+
+ /* Change the APLL frequency */
+ /* ENABLE (1 enable) | LOCKED (1 locked) */
+ /* [31] | [29] */
+ /* FSEL | MDIV | PDIV | SDIV */
+ /* [27] | [25:16] | [13:8] | [2:0] */
+ writel(0xa0c80604, &clk->apll_con0);
+
+ /* Change CPU0 clock divider */
+ /* CORE2_RATIO | APLL_RATIO | PCLK_DBG_RATIO | ATB_RATIO */
+ /* [30:28] | [26:24] | [22:20] | [18:16] */
+ /* PERIPH_RATIO | COREM1_RATIO | COREM0_RATIO | CORE_RATIO */
+ /* [14:12] | [10:8] | [6:4] | [2:0] */
+ writel(0x00000100, &clk->div_cpu0);
+
+ /* CLK_DIV_STAT_CPU0 - wait until clock gets stable (0 = stable) */
+ while (readl(&clk->div_stat_cpu0) & 0x1111111)
+ continue;
+
+ /* Change clock divider ratio for DMC */
+ /* DMCP_RATIO | DMCD_RATIO */
+ /* [22:20] | [18:16] */
+ /* DMC_RATIO | DPHY_RATIO | ACP_PCLK_RATIO | ACP_RATIO */
+ /* [14:12] | [10:8] | [6:4] | [2:0] */
+ writel(0x13113117, &clk->div_dmc0);
+
+ /* CLK_DIV_STAT_DMC0 - wait until clock gets stable (0 = stable) */
+ while (readl(&clk->div_stat_dmc0) & 0x11111111)
+ continue;
+
+ /* Turn off unnecessary power domains */
+ writel(0x0, &pwr->xxti_configuration); /* XXTI */
+ writel(0x0, &pwr->cam_configuration); /* CAM */
+ writel(0x0, &pwr->tv_configuration); /* TV */
+ writel(0x0, &pwr->mfc_configuration); /* MFC */
+ writel(0x0, &pwr->g3d_configuration); /* G3D */
+ writel(0x0, &pwr->gps_configuration); /* GPS */
+ writel(0x0, &pwr->gps_alive_configuration); /* GPS_ALIVE */
+
+ /* Turn off unnecessary clocks */
+ writel(0x0, &clk->gate_ip_cam); /* CAM */
+ writel(0x0, &clk->gate_ip_tv); /* TV */
+ writel(0x0, &clk->gate_ip_mfc); /* MFC */
+ writel(0x0, &clk->gate_ip_g3d); /* G3D */
+ writel(0x0, &clk->gate_ip_image); /* IMAGE */
+ writel(0x0, &clk->gate_ip_gps); /* GPS */
+}
+
+static int pmic_init_max8997(void)
+{
+ struct pmic *p = pmic_get("MAX8997_PMIC");
+ int i = 0, ret = 0;
+ u32 val;
+
+ if (pmic_probe(p))
+ return -1;
+
+ /* BUCK1 VARM: 1.2V */
+ val = (1200000 - 650000) / 25000;
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK1DVS1, val);
+ val = ENBUCK | ACTIVE_DISCHARGE; /* DVS OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK1CTRL, val);
+
+ /* BUCK2 VINT: 1.1V */
+ val = (1100000 - 650000) / 25000;
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK2DVS1, val);
+ val = ENBUCK | ACTIVE_DISCHARGE; /* DVS OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK2CTRL, val);
+
+
+ /* BUCK3 G3D: 1.1V - OFF */
+ ret |= pmic_reg_read(p, MAX8997_REG_BUCK3CTRL, &val);
+ val &= ~ENBUCK;
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK3CTRL, val);
+
+ val = (1100000 - 750000) / 50000;
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK3DVS, val);
+
+ /* BUCK4 CAMISP: 1.2V - OFF */
+ ret |= pmic_reg_read(p, MAX8997_REG_BUCK4CTRL, &val);
+ val &= ~ENBUCK;
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK4CTRL, val);
+
+ val = (1200000 - 650000) / 25000;
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK4DVS, val);
+
+ /* BUCK5 VMEM: 1.2V */
+ val = (1200000 - 650000) / 25000;
+ for (i = 0; i < 8; i++)
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK5DVS1 + i, val);
+
+ val = ENBUCK | ACTIVE_DISCHARGE; /* DVS OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK5CTRL, val);
+
+ /* BUCK6 CAM AF: 2.8V */
+ /* No Voltage Setting Register */
+ /* GNSLCT 3.0X */
+ val = GNSLCT;
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK6CTRL, val);
+
+ /* BUCK7 VCC_SUB: 2.0V */
+ val = (2000000 - 750000) / 50000;
+ ret |= pmic_reg_write(p, MAX8997_REG_BUCK7DVS, val);
+
+ /* LDO1 VADC: 3.3V */
+ val = max8997_reg_ldo(3300000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO1CTRL, val);
+
+ /* LDO1 Disable active discharging */
+ ret |= pmic_reg_read(p, MAX8997_REG_LDO1CONFIG, &val);
+ val &= ~LDO_ADE;
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO1CONFIG, val);
+
+ /* LDO2 VALIVE: 1.1V */
+ val = max8997_reg_ldo(1100000) | EN_LDO;
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO2CTRL, val);
+
+ /* LDO3 VUSB/MIPI: 1.1V */
+ val = max8997_reg_ldo(1100000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, val);
+
+ /* LDO4 VMIPI: 1.8V */
+ val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO4CTRL, val);
+
+ /* LDO5 VHSIC: 1.2V */
+ val = max8997_reg_ldo(1200000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO5CTRL, val);
+
+ /* LDO6 VCC_1.8V_PDA: 1.8V */
+ val = max8997_reg_ldo(1800000) | EN_LDO;
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO6CTRL, val);
+
+ /* LDO7 CAM_ISP: 1.8V */
+ val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO7CTRL, val);
+
+ /* LDO8 VDAC/VUSB: 3.3V */
+ val = max8997_reg_ldo(3300000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, val);
+
+ /* LDO9 VCC_2.8V_PDA: 2.8V */
+ val = max8997_reg_ldo(2800000) | EN_LDO;
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO9CTRL, val);
+
+ /* LDO10 VPLL: 1.1V */
+ val = max8997_reg_ldo(1100000) | EN_LDO;
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO10CTRL, val);
+
+ /* LDO11 TOUCH: 2.8V */
+ val = max8997_reg_ldo(2800000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO11CTRL, val);
+
+ /* LDO12 VTCAM: 1.8V */
+ val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO12CTRL, val);
+
+ /* LDO13 VCC_3.0_LCD: 3.0V */
+ val = max8997_reg_ldo(3000000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO13CTRL, val);
+
+ /* LDO14 MOTOR: 3.0V */
+ val = max8997_reg_ldo(3000000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO14CTRL, val);
+
+ /* LDO15 LED_A: 2.8V */
+ val = max8997_reg_ldo(2800000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO15CTRL, val);
+
+ /* LDO16 CAM_SENSOR: 1.8V */
+ val = max8997_reg_ldo(1800000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO16CTRL, val);
+
+ /* LDO17 VTF: 2.8V */
+ val = max8997_reg_ldo(2800000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO17CTRL, val);
+
+ /* LDO18 TOUCH_LED 3.3V */
+ val = max8997_reg_ldo(3300000) | DIS_LDO; /* OFF */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO18CTRL, val);
+
+ /* LDO21 VDDQ: 1.2V */
+ val = max8997_reg_ldo(1200000) | EN_LDO;
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO21CTRL, val);
+
+ /* SAFEOUT for both 1 and 2: 4.9V, Active discharge, Enable */
+ val = (SAFEOUT_4_90V << 0) | (SAFEOUT_4_90V << 2) |
+ ACTDISSAFEO1 | ACTDISSAFEO2 | ENSAFEOUT1 | ENSAFEOUT2;
+ ret |= pmic_reg_write(p, MAX8997_REG_SAFEOUTCTRL, val);
+
+ if (ret) {
+ puts("MAX8997 PMIC setting error!\n");
+ return -1;
+ }
+ return 0;
+}
+
+int power_init_board(void)
+{
+ int chrg, ret;
+ struct power_battery *pb;
+ struct pmic *p_fg, *p_chrg, *p_muic, *p_bat;
+
+ ret = pmic_init(I2C_5);
+ ret |= pmic_init_max8997();
+ ret |= power_fg_init(I2C_9);
+ ret |= power_muic_init(I2C_5);
+ ret |= power_bat_init(0);
+ if (ret)
+ return ret;
+
+ p_fg = pmic_get("MAX17042_FG");
+ if (!p_fg) {
+ puts("MAX17042_FG: Not found\n");
+ return -ENODEV;
+ }
+
+ p_chrg = pmic_get("MAX8997_PMIC");
+ if (!p_chrg) {
+ puts("MAX8997_PMIC: Not found\n");
+ return -ENODEV;
+ }
+
+ p_muic = pmic_get("MAX8997_MUIC");
+ if (!p_muic) {
+ puts("MAX8997_MUIC: Not found\n");
+ return -ENODEV;
+ }
+
+ p_bat = pmic_get("BAT_TRATS");
+ if (!p_bat) {
+ puts("BAT_TRATS: Not found\n");
+ return -ENODEV;
+ }
+
+ p_fg->parent = p_bat;
+ p_chrg->parent = p_bat;
+ p_muic->parent = p_bat;
+
+ p_bat->low_power_mode = trats_low_power_mode;
+ p_bat->pbat->battery_init(p_bat, p_fg, p_chrg, p_muic);
+
+ pb = p_bat->pbat;
+ chrg = p_muic->chrg->chrg_type(p_muic);
+ debug("CHARGER TYPE: %d\n", chrg);
+
+ if (!p_chrg->chrg->chrg_bat_present(p_chrg)) {
+ puts("No battery detected\n");
+ return -1;
+ }
+
+ p_fg->fg->fg_battery_check(p_fg, p_bat);
+
+ if (pb->bat->state == CHARGE && chrg == CHARGER_USB)
+ puts("CHARGE Battery !\n");
+
+ return 0;
+}
+
int dram_init(void)
{
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) +
@@ -200,7 +468,9 @@ static int s5pc210_phy_control(int on)
{
int ret = 0;
u32 val = 0;
- struct pmic *p = get_pmic();
+ struct pmic *p = pmic_get("MAX8997_PMIC");
+ if (!p)
+ return -ENODEV;
if (pmic_probe(p))
return -1;
@@ -379,7 +649,9 @@ static void lcd_reset(void)
static int lcd_power(void)
{
int ret = 0;
- struct pmic *p = get_pmic();
+ struct pmic *p = pmic_get("MAX8997_PMIC");
+ if (!p)
+ return -ENODEV;
if (pmic_probe(p))
return 0;
@@ -439,7 +711,9 @@ static struct mipi_dsim_lcd_device mipi_lcd_device = {
static int mipi_power(void)
{
int ret = 0;
- struct pmic *p = get_pmic();
+ struct pmic *p = pmic_get("MAX8997_PMIC");
+ if (!p)
+ return -ENODEV;
if (pmic_probe(p))
return 0;
diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c
index afe3bb0..1e67dea 100644
--- a/board/samsung/universal_c210/universal.c
+++ b/board/samsung/universal_c210/universal.c
@@ -38,6 +38,10 @@
#include <asm/arch/watchdog.h>
#include <libtizen.h>
#include <ld9040.h>
+#include <power/pmic.h>
+#include <usb/s3c_udc.h>
+#include <asm/arch/cpu.h>
+#include <power/max8998_pmic.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -57,6 +61,31 @@ static int get_hwrev(void)
static void check_hw_revision(void);
+int board_init(void)
+{
+ gpio1 = (struct exynos4_gpio_part1 *) EXYNOS4_GPIO_PART1_BASE;
+ gpio2 = (struct exynos4_gpio_part2 *) EXYNOS4_GPIO_PART2_BASE;
+
+ gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210;
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ check_hw_revision();
+ printf("HW Revision:\t0x%x\n", board_rev);
+
+ return 0;
+}
+
+int power_init_board(void)
+{
+ int ret;
+
+ ret = pmic_init(I2C_5);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
int dram_init(void)
{
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE) +
@@ -101,7 +130,9 @@ static unsigned short get_adc_value(int channel)
static int adc_power_control(int on)
{
int ret;
- struct pmic *p = get_pmic();
+ struct pmic *p = pmic_get("MAX8998_PMIC");
+ if (!p)
+ return -ENODEV;
if (pmic_probe(p))
return -1;
@@ -224,7 +255,9 @@ int board_mmc_init(bd_t *bis)
static int s5pc210_phy_control(int on)
{
int ret = 0;
- struct pmic *p = get_pmic();
+ struct pmic *p = pmic_get("MAX8998_PMIC");
+ if (!p)
+ return -ENODEV;
if (pmic_probe(p))
return -1;
diff --git a/board/sbc8548/ddr.c b/board/sbc8548/ddr.c
index 45ec485..9508561 100644
--- a/board/sbc8548/ddr.c
+++ b/board/sbc8548/ddr.c
@@ -91,7 +91,7 @@ void get_spd(generic_spd_eeprom_t *spd, u8 i2c_address)
*/
phys_size_t fixed_sdram(void)
{
- volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+ volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR);
out_be32(&ddr->cs0_bnds, 0x0000007f);
out_be32(&ddr->cs1_bnds, 0x008000ff);
diff --git a/board/socrates/sdram.c b/board/socrates/sdram.c
index c8235f4..8a9ce79 100644
--- a/board/socrates/sdram.c
+++ b/board/socrates/sdram.c
@@ -41,7 +41,7 @@
*/
phys_size_t fixed_sdram(void)
{
- volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
+ volatile ccsr_ddr_t *ddr = (void *)(CONFIG_SYS_MPC8xxx_DDR_ADDR);
/*
* Disable memory controller.
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index b56a801..f0eca54 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -379,9 +379,14 @@ static struct cpsw_platform_data cpsw_data = {
.host_port_num = 0,
.version = CPSW_CTRL_VERSION_2,
};
+#endif
+#if defined(CONFIG_DRIVER_TI_CPSW) || \
+ (defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET))
int board_eth_init(bd_t *bis)
{
+ int rv, n = 0;
+#ifdef CONFIG_DRIVER_TI_CPSW
uint8_t mac_addr[6];
uint32_t mac_hi, mac_lo;
@@ -400,7 +405,7 @@ int board_eth_init(bd_t *bis)
if (is_valid_ether_addr(mac_addr))
eth_setenv_enetaddr("ethaddr", mac_addr);
else
- return -1;
+ goto try_usbether;
}
if (board_is_bone() || board_is_bone_lt() || board_is_idk()) {
@@ -413,6 +418,20 @@ int board_eth_init(bd_t *bis)
PHY_INTERFACE_MODE_RGMII;
}
- return cpsw_register(&cpsw_data);
+ rv = cpsw_register(&cpsw_data);
+ if (rv < 0)
+ printf("Error %d registering CPSW switch\n", rv);
+ else
+ n += rv;
+#endif
+try_usbether:
+#if defined(CONFIG_USB_ETHER) && !defined(CONFIG_SPL_BUILD)
+ rv = usb_eth_initialize(bis);
+ if (rv < 0)
+ printf("Error %d registering USB_ETHER\n", rv);
+ else
+ n += rv;
+#endif
+ return n;
}
#endif
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index 6175e1d..f20ebed 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -42,6 +42,11 @@
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/mach-types.h>
+#include <asm/omap_musb.h>
+#include <asm/errno.h>
+#include <linux/usb/ch9.h>
+#include <linux/usb/gadget.h>
+#include <linux/usb/musb.h>
#include "beagle.h"
#include <command.h>
@@ -285,6 +290,33 @@ static void beagle_dvi_pup(void)
}
#endif
+#ifdef CONFIG_USB_MUSB_OMAP2PLUS
+static struct musb_hdrc_config musb_config = {
+ .multipoint = 1,
+ .dyn_fifo = 1,
+ .num_eps = 16,
+ .ram_bits = 12,
+};
+
+static struct omap_musb_board_data musb_board_data = {
+ .interface_type = MUSB_INTERFACE_ULPI,
+};
+
+static struct musb_hdrc_platform_data musb_plat = {
+#if defined(CONFIG_MUSB_HOST)
+ .mode = MUSB_HOST,
+#elif defined(CONFIG_MUSB_GADGET)
+ .mode = MUSB_PERIPHERAL,
+#else
+#error "Please define either CONFIG_MUSB_HOST or CONFIG_MUSB_GADGET"
+#endif
+ .config = &musb_config,
+ .power = 100,
+ .platform_ops = &omap2430_ops,
+ .board_data = &musb_board_data,
+};
+#endif
+
/*
* Routine: misc_init_r
* Description: Configure board specific parts
@@ -466,6 +498,10 @@ int misc_init_r(void)
omap3_dss_enable();
#endif
+#ifdef CONFIG_USB_MUSB_OMAP2PLUS
+ musb_register(&musb_plat, &musb_board_data, (void *)MUSB_BASE);
+#endif
+
return 0;
}
@@ -513,3 +549,10 @@ int ehci_hcd_stop(int index)
}
#endif /* CONFIG_USB_EHCI */
+
+#if defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)
+int board_eth_init(bd_t *bis)
+{
+ return usb_eth_initialize(bis);
+}
+#endif
diff --git a/board/ttcontrol/vision2/vision2.c b/board/ttcontrol/vision2/vision2.c
index abdd1aa..a471fec 100644
--- a/board/ttcontrol/vision2/vision2.c
+++ b/board/ttcontrol/vision2/vision2.c
@@ -34,7 +34,7 @@
#include <asm/arch/sys_proto.h>
#include <i2c.h>
#include <mmc.h>
-#include <pmic.h>
+#include <power/pmic.h>
#include <fsl_esdhc.h>
#include <fsl_pmic.h>
#include <mc13892.h>
@@ -306,9 +306,15 @@ static void power_init_mx51(void)
{
unsigned int val;
struct pmic *p;
+ int ret;
+
+ ret = pmic_init(I2C_PMIC);
+ if (ret)
+ return;
- pmic_init();
- p = get_pmic();
+ p = pmic_get("FSL_PMIC");
+ if (!p)
+ return;
/* Write needed to Power Gate 2 register */
pmic_reg_read(p, REG_POWER_MISC, &val);