summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/amcc/bamboo/Makefile48
-rw-r--r--board/amcc/bamboo/bamboo.c439
-rw-r--r--board/amcc/bamboo/config.mk44
-rw-r--r--board/amcc/bamboo/init.S107
-rw-r--r--board/amcc/bamboo/u-boot.lds155
-rw-r--r--board/amcc/bubinga/Makefile (renamed from board/bubinga405ep/Makefile)1
-rw-r--r--board/amcc/bubinga/bubinga.c84
-rw-r--r--board/amcc/bubinga/config.mk (renamed from board/walnut405/config.mk)7
-rw-r--r--board/amcc/bubinga/flash.c204
-rw-r--r--board/amcc/bubinga/u-boot.lds (renamed from board/bubinga405ep/u-boot.lds)1
-rw-r--r--board/amcc/common/flash.c (renamed from board/ocotea/flash.c)324
-rw-r--r--board/amcc/ebony/Makefile (renamed from board/ebony/Makefile)0
-rw-r--r--board/amcc/ebony/config.mk (renamed from board/ebony/config.mk)2
-rw-r--r--board/amcc/ebony/ebony.c (renamed from board/ebony/ebony.c)189
-rw-r--r--board/amcc/ebony/flash.c140
-rw-r--r--board/amcc/ebony/init.S (renamed from board/ebony/init.S)0
-rw-r--r--board/amcc/ebony/u-boot.lds (renamed from board/ebony/u-boot.lds)2
-rw-r--r--board/amcc/ocotea/Makefile (renamed from board/ocotea/Makefile)0
-rw-r--r--board/amcc/ocotea/config.mk (renamed from board/ocotea/config.mk)0
-rw-r--r--board/amcc/ocotea/flash.c150
-rw-r--r--board/amcc/ocotea/init.S (renamed from board/ocotea/init.S)0
-rw-r--r--board/amcc/ocotea/ocotea.c (renamed from board/ocotea/ocotea.c)12
-rw-r--r--board/amcc/ocotea/ocotea.h (renamed from board/ocotea/ocotea.h)0
-rw-r--r--board/amcc/ocotea/u-boot.lds (renamed from board/ocotea/u-boot.lds)2
-rw-r--r--board/amcc/walnut/Makefile (renamed from board/walnut405/Makefile)1
-rw-r--r--board/amcc/walnut/config.mk (renamed from board/bubinga405ep/config.mk)7
-rw-r--r--board/amcc/walnut/flash.c199
-rw-r--r--board/amcc/walnut/u-boot.lds (renamed from board/walnut405/u-boot.lds)1
-rw-r--r--board/amcc/walnut/walnut.c111
-rw-r--r--board/bubinga405ep/bubinga405ep.c117
-rw-r--r--board/bubinga405ep/bubinga405ep.h44
-rw-r--r--board/bubinga405ep/flash.c737
-rw-r--r--board/bubinga405ep/init.S55
-rw-r--r--board/bubinga405ep/u-boot.lds.debug146
-rw-r--r--board/ebony/ebony.h44
-rw-r--r--board/ebony/flash.c743
-rw-r--r--board/ebony/u-boot.lds.debug135
-rw-r--r--board/ocotea/u-boot.lds.debug144
-rw-r--r--board/walnut405/flash.c729
-rw-r--r--board/walnut405/init.S99
-rw-r--r--board/walnut405/u-boot.lds.debug135
-rw-r--r--board/walnut405/walnut405.c133
-rw-r--r--board/walnut405/walnut405.h44
43 files changed, 1919 insertions, 3616 deletions
diff --git a/board/amcc/bamboo/Makefile b/board/amcc/bamboo/Makefile
new file mode 100644
index 0000000..0b97906
--- /dev/null
+++ b/board/amcc/bamboo/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o
+#OBJS += flash.o
+SOBJS = init.o
+
+$(LIB): $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS)
+
+clean:
+ rm -f $(SOBJS) $(OBJS)
+
+distclean: clean
+ rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c
new file mode 100644
index 0000000..7b2d3f4
--- /dev/null
+++ b/board/amcc/bamboo/bamboo.c
@@ -0,0 +1,439 @@
+/*
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <spd_sdram.h>
+
+int board_early_init_f(void)
+{
+ register uint reg;
+
+ /*--------------------------------------------------------------------
+ * Setup the external bus controller/chip selects
+ *-------------------------------------------------------------------*/
+ mtdcr(ebccfga, xbcfg);
+ reg = mfdcr(ebccfgd);
+ mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */
+
+#if 0 /* test-only */
+ mtebc(pb0ap, 0x03017300); /* FLASH/SRAM */
+ mtebc(pb0cr, 0xfe0ba000); /* BAS=0xfe0 32MB r/w 16-bit */
+
+ mtebc(pb1ap, 0x00000000);
+ mtebc(pb1cr, 0x00000000);
+
+ mtebc(pb2ap, 0x04814500);
+ /*CPLD*/ mtebc(pb2cr, 0x80018000); /*BAS=0x800 1MB r/w 8-bit */
+#else
+ mtebc(pb0ap, 0x04055200); /* FLASH/SRAM */
+ mtebc(pb0cr, 0xfff18000); /* BAS=0xfe0 1MB r/w 8-bit */
+#endif
+
+ mtebc(pb3ap, 0x00000000);
+ mtebc(pb3cr, 0x00000000);
+
+ mtebc(pb4ap, 0x00000000);
+ mtebc(pb4cr, 0x00000000);
+
+ mtebc(pb5ap, 0x00000000);
+ mtebc(pb5cr, 0x00000000);
+
+ /*--------------------------------------------------------------------
+ * Setup the interrupt controller polarities, triggers, etc.
+ *-------------------------------------------------------------------*/
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+ mtdcr(uic0er, 0x00000000); /* disable all */
+ mtdcr(uic0cr, 0x00000009); /* ATI & UIC1 crit are critical */
+ mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */
+ mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */
+ mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(uic1er, 0x00000000); /* disable all */
+ mtdcr(uic1cr, 0x00000000); /* all non-critical */
+ mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */
+ mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */
+ mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+
+ /*--------------------------------------------------------------------
+ * Setup the GPIO pins
+ *-------------------------------------------------------------------*/
+ /*CPLD cs */
+ /*setup Address lines for flash sizes larger than 16Meg. */
+ out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x40010000);
+ out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40010000);
+ out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x40000000);
+
+ /*setup emac */
+ out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080);
+ out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40);
+ out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55);
+ out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000);
+ out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000);
+
+ /*UART1 */
+ out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x02000000);
+ out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x00080000);
+ out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x00010000);
+
+ /*setup USB 2.0 */
+ out32(GPIO1_TCR, in32(GPIO1_TCR) | 0xc0000000);
+ out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x50000000);
+ out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xf);
+ out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0xaa);
+ out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500);
+
+ /*--------------------------------------------------------------------
+ * Setup other serial configuration
+ *-------------------------------------------------------------------*/
+ mfsdr(sdr_pci0, reg);
+ mtsdr(sdr_pci0, 0x80000000 | reg); /* PCI arbiter enabled */
+ mtsdr(sdr_pfc0, 0x00003e00); /* Pin function */
+ mtsdr(sdr_pfc1, 0x00048000); /* Pin function: UART0 has 4 pins */
+
+#if 0 /* test-only */
+ /*clear tmrclk divisor */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
+
+ /*enable ethernet */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0;
+
+ /*enable usb 1.1 fs device and remove usb 2.0 reset */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00;
+
+ /*get rid of flash write protect */
+ *(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x40;
+#endif
+
+ return 0;
+}
+
+int checkboard(void)
+{
+ sys_info_t sysinfo;
+ unsigned char *s = getenv("serial#");
+
+ get_sys_info(&sysinfo);
+
+ printf("Board: Bamboo - AMCC PPC440EP Evaluation Board");
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
+ printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+ printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+ printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+ printf("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
+ return (0);
+}
+
+/*************************************************************************
+ * sdram_init -- doesn't use serial presence detect.
+ *
+ * Assumes: 256 MB, ECC, non-registered
+ * PLB @ 133 MHz
+ *
+ ************************************************************************/
+void sdram_init(void)
+{
+ register uint reg;
+
+ /*--------------------------------------------------------------------
+ * Setup some default
+ *------------------------------------------------------------------*/
+ mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */
+ mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
+ mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
+ mtsdram(mem_clktr, 0x40000000); /* ?? */
+ mtsdram(mem_wddctr, 0x40000000); /* ?? */
+
+ /*clear this first, if the DDR is enabled by a debugger
+ then you can not make changes. */
+ mtsdram(mem_cfg0, 0x00000000); /* Disable EEC */
+
+ /*--------------------------------------------------------------------
+ * Setup for board-specific specific mem
+ *------------------------------------------------------------------*/
+ /*
+ * Following for CAS Latency = 2.5 @ 133 MHz PLB
+ */
+ mtsdram(mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
+ mtsdram(mem_b1cr, 0x080a4001); /* SDBA=0x080 128MB, Mode 3, enabled */
+
+ mtsdram(mem_tr0, 0x410a4012); /* ?? */
+ mtsdram(mem_tr1, 0x8080080b); /* ?? */
+ mtsdram(mem_rtr, 0x04080000); /* ?? */
+ mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
+ mtsdram(mem_cfg0, 0x34000000); /* Disable EEC */
+ udelay(400); /* Delay 200 usecs (min) */
+
+ /*--------------------------------------------------------------------
+ * Enable the controller, then wait for DCEN to complete
+ *------------------------------------------------------------------*/
+ mtsdram(mem_cfg0, 0x84000000); /* Enable */
+
+ for (;;) {
+ mfsdram(mem_mcsts, reg);
+ if (reg & 0x80000000)
+ break;
+ }
+}
+
+/*************************************************************************
+ * long int initdram
+ *
+ ************************************************************************/
+long int initdram(int board)
+{
+ sdram_init();
+ return CFG_SDRAM_BANKS * (CFG_KBYTES_SDRAM * 1024); /* return bytes */
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram(void)
+{
+ unsigned long *mem = (unsigned long *)0;
+ const unsigned long kend = (1024 / sizeof(unsigned long));
+ unsigned long k, n;
+
+ mtmsr(0);
+
+ for (k = 0; k < CFG_KBYTES_SDRAM;
+ ++k, mem += (1024 / sizeof(unsigned long))) {
+ if ((k & 1023) == 0) {
+ printf("%3d MB\r", k / 1024);
+ }
+
+ memset(mem, 0xaaaaaaaa, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0xaaaaaaaa) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+
+ memset(mem, 0x55555555, 1024);
+ for (n = 0; n < kend; ++n) {
+ if (mem[n] != 0x55555555) {
+ printf("SDRAM test fails at: %08x\n",
+ (uint) & mem[n]);
+ return 1;
+ }
+ }
+ }
+ printf("SDRAM test passes\n");
+ return 0;
+}
+#endif
+
+/*************************************************************************
+ * pci_pre_init
+ *
+ * This routine is called just prior to registering the hose and gives
+ * the board the opportunity to check things. Returning a value of zero
+ * indicates that things are bad & PCI initialization should be aborted.
+ *
+ * Different boards may wish to customize the pci controller structure
+ * (add regions, override default access routines, etc) or perform
+ * certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller *hose)
+{
+ unsigned long strap;
+ unsigned long addr;
+
+ /*--------------------------------------------------------------------------+
+ * Bamboo is always configured as the host & requires the
+ * PCI arbiter to be enabled.
+ *--------------------------------------------------------------------------*/
+ mfsdr(sdr_sdstp1, strap);
+ if ((strap & SDR0_SDSTP1_PAE_MASK) == 0) {
+ printf("PCI: SDR0_STRP1[PAE] not set.\n");
+ printf("PCI: Configuration aborted.\n");
+ return 0;
+ }
+
+ /*-------------------------------------------------------------------------+
+ | Set priority for all PLB3 devices to 0.
+ | Set PLB3 arbiter to fair mode.
+ +-------------------------------------------------------------------------*/
+ mfsdr(sdr_amp1, addr);
+ mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(plb3_acr);
+ mtdcr(plb3_acr, addr | 0x80000000);
+
+ /*-------------------------------------------------------------------------+
+ | Set priority for all PLB4 devices to 0.
+ +-------------------------------------------------------------------------*/
+ mfsdr(sdr_amp0, addr);
+ mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
+ addr = mfdcr(plb4_acr) | 0xa0000000; /* Was 0x8---- */
+ mtdcr(plb4_acr, addr);
+
+ /*-------------------------------------------------------------------------+
+ | Set Nebula PLB4 arbiter to fair mode.
+ +-------------------------------------------------------------------------*/
+ /* Segment0 */
+ addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
+ addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
+ addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
+ addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
+ mtdcr(plb0_acr, addr);
+
+ /* Segment1 */
+ addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
+ addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
+ addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
+ addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
+ mtdcr(plb1_acr, addr);
+
+ return 1;
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ * pci_target_init
+ *
+ * The bootstrap configuration provides default settings for the pci
+ * inbound map (PIM). But the bootstrap config choices are limited and
+ * may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+ /*--------------------------------------------------------------------------+
+ * Set up Direct MMIO registers
+ *--------------------------------------------------------------------------*/
+ /*--------------------------------------------------------------------------+
+ | PowerPC440 EP PCI Master configuration.
+ | Map one 1Gig range of PLB/processor addresses to PCI memory space.
+ | PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
+ | Use byte reversed out routines to handle endianess.
+ | Make this region non-prefetchable.
+ +--------------------------------------------------------------------------*/
+ out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */
+ out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */
+
+ out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */
+ out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */
+ out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); /* PMM0 PCI Low Address */
+ out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */
+ out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */
+
+ out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */
+ out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */
+ out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */
+
+ /*--------------------------------------------------------------------------+
+ * Set up Configuration registers
+ *--------------------------------------------------------------------------*/
+
+ /* Program the board's subsystem id/vendor id */
+ pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+ CFG_PCI_SUBSYS_VENDORID);
+ pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+
+ /* Configure command register as bus master */
+ pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+
+ /* 240nS PCI clock */
+ pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+ /* No error reporting */
+ pci_write_config_word(0, PCI_ERREN, 0);
+
+ pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ * pci_master_init
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+void pci_master_init(struct pci_controller *hose)
+{
+ unsigned short temp_short;
+
+ /*--------------------------------------------------------------------------+
+ | Write the PowerPC440 EP PCI Configuration regs.
+ | Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+ | Enable PowerPC440 EP to act as a PCI memory target (PTM).
+ +--------------------------------------------------------------------------*/
+ pci_read_config_word(0, PCI_COMMAND, &temp_short);
+ pci_write_config_word(0, PCI_COMMAND,
+ temp_short | PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY);
+}
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+
+/*************************************************************************
+ * is_pci_host
+ *
+ * This routine is called to determine if a pci scan should be
+ * performed. With various hardware environments (especially cPCI and
+ * PPMC) it's insufficient to depend on the state of the arbiter enable
+ * bit in the strap register, or generic host/adapter assumptions.
+ *
+ * Rather than hard-code a bad assumption in the general 440 code, the
+ * 440 pci code requires the board to decide at runtime.
+ *
+ * Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+ /* Bamboo is always configured as host. */
+ return (1);
+}
+#endif /* defined(CONFIG_PCI) */
+
+/*************************************************************************
+ * hw_watchdog_reset
+ *
+ * This routine is called to reset (keep alive) the watchdog timer
+ *
+ ************************************************************************/
+#if defined(CONFIG_HW_WATCHDOG)
+void hw_watchdog_reset(void)
+{
+
+}
+#endif
diff --git a/board/amcc/bamboo/config.mk b/board/amcc/bamboo/config.mk
new file mode 100644
index 0000000..4ab0ea0
--- /dev/null
+++ b/board/amcc/bamboo/config.mk
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# esd ADCIOP boards
+#
+
+#TEXT_BASE = 0x00001000
+
+ifeq ($(ramsym),1)
+TEXT_BASE = 0xFBD00000
+else
+TEXT_BASE = 0xFFF80000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/amcc/bamboo/init.S b/board/amcc/bamboo/init.S
new file mode 100644
index 0000000..7ba43c7
--- /dev/null
+++ b/board/amcc/bamboo/init.S
@@ -0,0 +1,107 @@
+/*
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID 0x00000200
+
+/* Supported page sizes */
+
+#define SZ_1K 0x00000000
+#define SZ_4K 0x00000010
+#define SZ_16K 0x00000020
+#define SZ_64K 0x00000030
+#define SZ_256K 0x00000040
+#define SZ_1M 0x00000050
+#define SZ_8M 0x00000060
+#define SZ_16M 0x00000070
+#define SZ_256M 0x00000090
+
+/* Storage attributes */
+#define SA_W 0x00000800 /* Write-through */
+#define SA_I 0x00000400 /* Caching inhibited */
+#define SA_M 0x00000200 /* Memory coherence */
+#define SA_G 0x00000100 /* Guarded */
+#define SA_E 0x00000080 /* Endian */
+
+/* Access control */
+#define AC_X 0x00000024 /* Execute */
+#define AC_W 0x00000012 /* Write */
+#define AC_R 0x00000009 /* Read */
+
+/* Some handy macros */
+
+#define EPN(e) ((e) & 0xfffffc00)
+#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
+#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
+#define TLB2(a) ( (a)&0x00000fbf )
+
+#define tlbtab_start\
+ mflr r1 ;\
+ bl 0f ;
+
+#define tlbtab_end\
+ .long 0, 0, 0 ; \
+0: mflr r0 ; \
+ mtlr r1 ; \
+ blr ;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+ .long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ * Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+ .section .bootpg,"ax"
+ .globl tlbtab
+
+tlbtab:
+ tlbtab_start
+ /*
+ 0xf0000000 must be first, before relocation SA_I must be off to use the
+ dcache as stack. It is patched after relocation to enable SA_I
+ */
+ tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
+ tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+ tlbentry( CFG_PCI_BASE, SZ_256M, 0xE0000000, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_NVRAM_BASE_ADDR, SZ_16K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
+
+ /* PCI */
+ tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
+ tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
+
+ /* USB 2.0 Device */
+ tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
+
+ tlbtab_end
diff --git a/board/amcc/bamboo/u-boot.lds b/board/amcc/bamboo/u-boot.lds
new file mode 100644
index 0000000..a4016d5
--- /dev/null
+++ b/board/amcc/bamboo/u-boot.lds
@@ -0,0 +1,155 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+ __DYNAMIC = 0; */
+SECTIONS
+{
+ .resetvec 0xFFFFFFFC :
+ {
+ *(.resetvec)
+ } = 0xffff
+
+ .bootpg 0xFFFFF000 :
+ {
+ cpu/ppc4xx/start.o (.bootpg)
+ } = 0xffff
+
+ /* Read-only sections, merged into text segment: */
+ . = + SIZEOF_HEADERS;
+ .interp : { *(.interp) }
+ .hash : { *(.hash) }
+ .dynsym : { *(.dynsym) }
+ .dynstr : { *(.dynstr) }
+ .rel.text : { *(.rel.text) }
+ .rela.text : { *(.rela.text) }
+ .rel.data : { *(.rel.data) }
+ .rela.data : { *(.rela.data) }
+ .rel.rodata : { *(.rel.rodata) }
+ .rela.rodata : { *(.rela.rodata) }
+ .rel.got : { *(.rel.got) }
+ .rela.got : { *(.rela.got) }
+ .rel.ctors : { *(.rel.ctors) }
+ .rela.ctors : { *(.rela.ctors) }
+ .rel.dtors : { *(.rel.dtors) }
+ .rela.dtors : { *(.rela.dtors) }
+ .rel.bss : { *(.rel.bss) }
+ .rela.bss : { *(.rela.bss) }
+ .rel.plt : { *(.rel.plt) }
+ .rela.plt : { *(.rela.plt) }
+ .init : { *(.init) }
+ .plt : { *(.plt) }
+ .text :
+ {
+ /* WARNING - the following is hand-optimized to fit within */
+ /* the sector layout of our flash chips! XXX FIXME XXX */
+
+ cpu/ppc4xx/start.o (.text)
+ board/amcc/bamboo/init.o (.text)
+ cpu/ppc4xx/kgdb.o (.text)
+ cpu/ppc4xx/traps.o (.text)
+ cpu/ppc4xx/interrupts.o (.text)
+ cpu/ppc4xx/serial.o (.text)
+ cpu/ppc4xx/cpu_init.o (.text)
+ cpu/ppc4xx/speed.o (.text)
+ cpu/ppc4xx/405gp_enet.o (.text)
+ common/dlmalloc.o (.text)
+ lib_generic/crc32.o (.text)
+ lib_ppc/extable.o (.text)
+ lib_generic/zlib.o (.text)
+
+/* . = env_offset;*/
+/* common/environment.o(.text)*/
+
+ *(.text)
+ *(.fixup)
+ *(.got1)
+ }
+ _etext = .;
+ PROVIDE (etext = .);
+ .rodata :
+ {
+ *(.rodata)
+ *(.rodata1)
+ *(.rodata.str1.4)
+ }
+ .fini : { *(.fini) } =0
+ .ctors : { *(.ctors) }
+ .dtors : { *(.dtors) }
+
+ /* Read-write section, merged into data segment: */
+ . = (. + 0x00FF) & 0xFFFFFF00;
+ _erotext = .;
+ PROVIDE (erotext = .);
+ .reloc :
+ {
+ *(.got)
+ _GOT2_TABLE_ = .;
+ *(.got2)
+ _FIXUP_TABLE_ = .;
+ *(.fixup)
+ }
+ __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+ __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+ .data :
+ {
+ *(.data)
+ *(.data1)
+ *(.sdata)
+ *(.sdata2)
+ *(.dynamic)
+ CONSTRUCTORS
+ }
+ _edata = .;
+ PROVIDE (edata = .);
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
+
+ . = ALIGN(256);
+ __init_begin = .;
+ .text.init : { *(.text.init) }
+ .data.init : { *(.data.init) }
+ . = ALIGN(256);
+ __init_end = .;
+
+ __bss_start = .;
+ .bss :
+ {
+ *(.sbss) *(.scommon)
+ *(.dynbss)
+ *(.bss)
+ *(COMMON)
+ }
+ _end = . ;
+ PROVIDE (end = .);
+}
diff --git a/board/bubinga405ep/Makefile b/board/amcc/bubinga/Makefile
index 97d6a1e..f5bda55 100644
--- a/board/bubinga405ep/Makefile
+++ b/board/amcc/bubinga/Makefile
@@ -26,7 +26,6 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS = $(BOARD).o flash.o
-SOBJS = init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
diff --git a/board/amcc/bubinga/bubinga.c b/board/amcc/bubinga/bubinga.c
new file mode 100644
index 0000000..b4e9349
--- /dev/null
+++ b/board/amcc/bubinga/bubinga.c
@@ -0,0 +1,84 @@
+/*
+ * (C) Copyright 2000-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+long int spd_sdram(void);
+
+#include <common.h>
+#include <asm/processor.h>
+
+int board_early_init_f(void)
+{
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicer, 0x00000000); /* disable all ints */
+ mtdcr(uiccr, 0x00000010);
+ mtdcr(uicpr, 0xFFFF7FF0); /* set int polarities */
+ mtdcr(uictr, 0x00000010); /* set int trigger levels */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+
+ return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+ unsigned char *s = getenv("serial#");
+
+ puts("Board: Bubinga - AMCC PPC405EP Evaluation Board");
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ return (0);
+}
+
+/*
+ * sdram_init - Dummy implementation for start.S, spd_sdram used on this board!
+ */
+void sdram_init(void)
+{
+ return;
+}
+
+/* -------------------------------------------------------------------------
+ initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
+ the necessary info for SDRAM controller configuration
+ ------------------------------------------------------------------------- */
+long int initdram(int board_type)
+{
+ long int ret;
+
+ ret = spd_sdram();
+ return ret;
+}
+
+int testdram(void)
+{
+ /* TODO: XXX XXX XXX */
+ printf("test: xxx MB - ok\n");
+
+ return (0);
+}
diff --git a/board/walnut405/config.mk b/board/amcc/bubinga/config.mk
index 8426bb3..1bdf5e4 100644
--- a/board/walnut405/config.mk
+++ b/board/amcc/bubinga/config.mk
@@ -21,9 +21,4 @@
# MA 02111-1307 USA
#
-#
-# esd ADCIOP boards
-#
-
-#TEXT_BASE = 0xFFFE0000
-TEXT_BASE = 0xFFF80000
+TEXT_BASE = 0xFFFC0000
diff --git a/board/amcc/bubinga/flash.c b/board/amcc/bubinga/flash.c
new file mode 100644
index 0000000..e4832eb
--- /dev/null
+++ b/board/amcc/bubinga/flash.c
@@ -0,0 +1,204 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+#undef DEBUG
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif /* DEBUG */
+
+/*
+ * include common flash code (for amcc boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+static void flash_get_offsets(ulong base, flash_info_t * info);
+
+unsigned long flash_init(void)
+{
+ unsigned long size_b0, size_b1;
+ int i;
+ uint pbcr;
+ unsigned long base_b0, base_b1;
+
+ /* Init: no FLASHes known */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size_b0 =
+ flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0 << 20);
+ }
+
+ /* Only one bank */
+ if (CFG_MAX_FLASH_BANKS == 1) {
+ /* Setup offsets */
+ flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ &flash_info[0]);
+#ifdef CFG_ENV_IS_IN_FLASH
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+#endif
+
+ size_b1 = 0;
+ flash_info[0].size = size_b0;
+ }
+
+ /* 2 banks */
+ else {
+ size_b1 =
+ flash_get_size((vu_long *) FLASH_BASE1_PRELIM,
+ &flash_info[1]);
+
+ /* Re-do sizing to get full correct info */
+
+ if (size_b1) {
+ mtdcr(ebccfga, pb0cr);
+ pbcr = mfdcr(ebccfgd);
+ mtdcr(ebccfga, pb0cr);
+ base_b1 = -size_b1;
+ pbcr = (pbcr & 0x0001ffff) | base_b1 |
+ (((size_b1 / 1024 / 1024) - 1) << 17);
+ mtdcr(ebccfgd, pbcr);
+ /* printf("pb1cr = %x\n", pbcr); */
+ }
+
+ if (size_b0) {
+ mtdcr(ebccfga, pb1cr);
+ pbcr = mfdcr(ebccfgd);
+ mtdcr(ebccfga, pb1cr);
+ base_b0 = base_b1 - size_b0;
+ pbcr = (pbcr & 0x0001ffff) | base_b0 |
+ (((size_b0 / 1024 / 1024) - 1) << 17);
+ mtdcr(ebccfgd, pbcr);
+ /* printf("pb0cr = %x\n", pbcr); */
+ }
+
+ size_b0 = flash_get_size((vu_long *) base_b0, &flash_info[0]);
+
+ flash_get_offsets(base_b0, &flash_info[0]);
+
+ /* monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ base_b0 + size_b0 - CFG_MONITOR_LEN,
+ base_b0 + size_b0 - 1, &flash_info[0]);
+ /* Also protect sector containing initial power-up instruction */
+ /* (flash_protect() checks address range - other call ignored) */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ 0xFFFFFFFC, 0xFFFFFFFF, &flash_info[0]);
+ (void)flash_protect(FLAG_PROTECT_SET,
+ 0xFFFFFFFC, 0xFFFFFFFF, &flash_info[1]);
+
+ if (size_b1) {
+ /* Re-do sizing to get full correct info */
+ size_b1 =
+ flash_get_size((vu_long *) base_b1, &flash_info[1]);
+
+ flash_get_offsets(base_b1, &flash_info[1]);
+
+ /* monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ base_b1 + size_b1 - CFG_MONITOR_LEN,
+ base_b1 + size_b1 - 1,
+ &flash_info[1]);
+ /* monitor protection OFF by default (one is enough) */
+ (void)flash_protect(FLAG_PROTECT_CLEAR,
+ base_b0 + size_b0 - CFG_MONITOR_LEN,
+ base_b0 + size_b0 - 1,
+ &flash_info[0]);
+ } else {
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[1].sector_count = -1;
+ }
+
+ flash_info[0].size = size_b0;
+ flash_info[1].size = size_b1;
+ } /* else 2 banks */
+ return (size_b0 + size_b1);
+}
+
+static void flash_get_offsets(ulong base, flash_info_t * info)
+{
+ int i;
+
+ /* set up sector start address table */
+ if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+ (info->flash_id == FLASH_AM040)) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else {
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] =
+ base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+ }
+}
diff --git a/board/bubinga405ep/u-boot.lds b/board/amcc/bubinga/u-boot.lds
index 3894614..b8f08ea 100644
--- a/board/bubinga405ep/u-boot.lds
+++ b/board/amcc/bubinga/u-boot.lds
@@ -62,7 +62,6 @@ SECTIONS
/* the sector layout of our flash chips! XXX FIXME XXX */
cpu/ppc4xx/start.o (.text)
- board/bubinga405ep/init.o (.text)
cpu/ppc4xx/kgdb.o (.text)
cpu/ppc4xx/traps.o (.text)
cpu/ppc4xx/interrupts.o (.text)
diff --git a/board/ocotea/flash.c b/board/amcc/common/flash.c
index bc0d2c9..7311c4e 100644
--- a/board/ocotea/flash.c
+++ b/board/amcc/common/flash.c
@@ -35,115 +35,13 @@
#include <ppc4xx.h>
#include <asm/processor.h>
-#undef DEBUG
-
-#ifdef DEBUG
-#define DEBUGF(x...) printf(x)
-#else
-#define DEBUGF(x...)
-#endif /* DEBUG */
-
-#define BOOT_SMALL_FLASH 0x40 /* 01000000 */
-#define FLASH_ONBD_N 2 /* 00000010 */
-#define FLASH_SRAM_SEL 1 /* 00000001 */
-#define FLASH_ONBD_N 2 /* 00000010 */
-#define FLASH_SRAM_SEL 1 /* 00000001 */
-
-#define BOOT_SMALL_FLASH_VAL 4
-#define FLASH_ONBD_N_VAL 2
-#define FLASH_SRAM_SEL_VAL 1
-
-
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
-static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
- {0xFF800000, 0xFF880000, 0xFFC00000}, /* 0:000: configuraton 4 */
- {0xFF900000, 0xFF980000, 0xFFC00000}, /* 1:001: configuraton 3 */
- {0x00000000, 0x00000000, 0x00000000}, /* 2:010: configuraton 8 */
- {0x00000000, 0x00000000, 0x00000000}, /* 3:011: configuraton 7 */
- {0xFFE00000, 0xFFF00000, 0xFF800000}, /* 4:100: configuraton 2 */
- {0xFFF00000, 0xFFF80000, 0xFF800000}, /* 5:101: configuraton 1 */
- {0x00000000, 0x00000000, 0x00000000}, /* 6:110: configuraton 6 */
- {0x00000000, 0x00000000, 0x00000000} /* 7:111: configuraton 5 */
-};
-
/*-----------------------------------------------------------------------
* Functions
*/
-static ulong flash_get_size(vu_long * addr, flash_info_t * info);
static int write_word(flash_info_t * info, ulong dest, ulong data);
-
-#ifdef CONFIG_OCOTEA
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init(void)
-{
- unsigned long total_b = 0;
- unsigned long size_b[CFG_MAX_FLASH_BANKS];
- unsigned char *fpga_base = (unsigned char *) CFG_FPGA_BASE;
- unsigned char switch_status;
- unsigned short index = 0;
- int i;
-
- /* read FPGA base register FPGA_REG0 */
- switch_status = *fpga_base;
-
- /* check the bitmap of switch status */
- if (switch_status & BOOT_SMALL_FLASH) {
- index += BOOT_SMALL_FLASH_VAL;
- }
- if (switch_status & FLASH_ONBD_N) {
- index += FLASH_ONBD_N_VAL;
- }
- if (switch_status & FLASH_SRAM_SEL) {
- index += FLASH_SRAM_SEL_VAL;
- }
-
- DEBUGF("\n");
- DEBUGF("FLASH: Index: %d\n", index);
-
- /* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- flash_info[i].sector_count = -1;
- flash_info[i].size = 0;
-
- /* check whether the address is 0 */
- if (flash_addr_table[index][i] == 0) {
- continue;
- }
-
- /* call flash_get_size() to initialize sector address */
- size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i], &flash_info[i]);
- flash_info[i].size = size_b[i];
- if (flash_info[i].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
- i, size_b[i], size_b[i] << 20);
- flash_info[i].sector_count = -1;
- flash_info[i].size = 0;
- }
-
- total_b += flash_info[i].size;
- }
-
- /* Monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET,
- -CFG_MONITOR_LEN,
- 0xffffffff,
- &flash_info[2]);
-
- return total_b;
-}
-
-/*-----------------------------------------------------------------------
- */
void flash_print_info(flash_info_t * info)
{
int i;
@@ -191,6 +89,9 @@ void flash_print_info(flash_info_t * info)
case FLASH_AM800T:
printf("AM29LV800T (8 Mbit, top boot sector)\n");
break;
+ case FLASH_AMD016:
+ printf("AM29F016D (16 Mbit, uniform sector size)\n");
+ break;
case FLASH_AM160B:
printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
break;
@@ -203,7 +104,7 @@ void flash_print_info(flash_info_t * info)
case FLASH_AM320T:
printf("AM29LV320T (32 Mbit, top boot sector)\n");
break;
- case FLASH_AMDLV033C:
+ case FLASH_AM033C:
printf("AM29LV033C (32 Mbit, top boot sector)\n");
break;
case FLASH_SST800A:
@@ -230,7 +131,7 @@ void flash_print_info(flash_info_t * info)
else
size = info->start[0] + info->size - info->start[i];
erased = 1;
- flash = (volatile unsigned long *) info->start[i];
+ flash = (volatile unsigned long *)info->start[i];
size = size >> 2; /* divide by 4 for longword access */
for (k = 0; k < size; k++) {
if (*flash++ != 0xffffffff) {
@@ -249,8 +150,6 @@ void flash_print_info(flash_info_t * info)
return;
}
-/*-----------------------------------------------------------------------
- */
/*
* The following code cannot be run from FLASH!
@@ -258,72 +157,115 @@ void flash_print_info(flash_info_t * info)
static ulong flash_get_size(vu_long * addr, flash_info_t * info)
{
short i;
- FLASH_WORD_SIZE value;
+ CFG_FLASH_WORD_SIZE value;
ulong base = (ulong) addr;
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr;
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
- DEBUGF("FLASH ADDR: %08x\n", (unsigned) addr);
+ DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
/* Write auto select command: read Manufacturer ID */
- udelay(10000);
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- udelay(1000);
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- udelay(1000);
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00900090;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
udelay(1000);
value = addr2[0];
DEBUGF("FLASH MANUFACT: %x\n", value);
switch (value) {
- case (FLASH_WORD_SIZE) AMD_MANUFACT:
+ case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
info->flash_id = FLASH_MAN_AMD;
break;
- case (FLASH_WORD_SIZE) FUJ_MANUFACT:
+ case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
info->flash_id = FLASH_MAN_FUJ;
break;
- case (FLASH_WORD_SIZE) SST_MANUFACT:
+ case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
info->flash_id = FLASH_MAN_SST;
break;
- case (FLASH_WORD_SIZE) STM_MANUFACT:
+ case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
info->flash_id = FLASH_MAN_STM;
break;
default:
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
- return (0); /* no or unknown flash */
+ return (0); /* no or unknown flash */
}
- value = addr2[1]; /* device ID */
+ value = addr2[1]; /* device ID */
DEBUGF("\nFLASH DEVICEID: %x\n", value);
switch (value) {
- case (FLASH_WORD_SIZE) AMD_ID_LV040B:
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
info->size = 0x0080000; /* => 512 ko */
break;
- case (FLASH_WORD_SIZE) AMD_ID_F040B:
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
info->size = 0x0080000; /* => 512 ko */
break;
- case (FLASH_WORD_SIZE) STM_ID_M29W040B:
+
+ case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B:
info->flash_id += FLASH_AM040;
info->sector_count = 8;
info->size = 0x0080000; /* => 512 ko */
break;
- case (FLASH_WORD_SIZE) AMD_ID_LV033C:
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D:
+ info->flash_id += FLASH_AMD016;
+ info->sector_count = 32;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C:
info->flash_id += FLASH_AMDLV033C;
info->sector_count = 64;
info->size = 0x00400000;
- break; /* => 4 MB */
+ break; /* => 4 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T:
+ info->flash_id += FLASH_AM400T;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B:
+ info->flash_id += FLASH_AM400B;
+ info->sector_count = 11;
+ info->size = 0x00080000;
+ break; /* => 0.5 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T:
+ info->flash_id += FLASH_AM800T;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B:
+ info->flash_id += FLASH_AM800B;
+ info->sector_count = 19;
+ info->size = 0x00100000;
+ break; /* => 1 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T:
+ info->flash_id += FLASH_AM160T;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
+ case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B:
+ info->flash_id += FLASH_AM160B;
+ info->sector_count = 35;
+ info->size = 0x00200000;
+ break; /* => 2 MB */
+
default:
info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
+ return (0); /* => no or unknown flash */
}
/* set up sector start address table */
@@ -340,7 +282,8 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
info->start[2] = base + 0x00006000;
info->start[3] = base + 0x00008000;
for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
+ info->start[i] =
+ base + (i * 0x00010000) - 0x00030000;
}
} else {
/* set sector offsets for top boot block type */
@@ -358,14 +301,14 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
for (i = 0; i < info->sector_count; i++) {
/* read sector protection at sector address, (A7 .. A0) = 0x02 */
/* D0 = 1 if protected */
- addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]);
-
- /* For AMD29033C flash we need to resend the command of *
- * reading flash protection for upper 8 Mb of flash */
- if ( i == 32 ) {
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0xAAAAAAAA;
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x55555555;
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x90909090;
+ addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+
+ /* For AMD29033C flash we need to resend the command of *
+ * reading flash protection for upper 8 Mb of flash */
+ if (i == 32) {
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
}
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
@@ -375,14 +318,7 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
}
/* issue bank reset to return to read mode */
- addr2[0] = (FLASH_WORD_SIZE) 0x00F000F0;
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
- /* ? ? ? */
- }
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
return (info->size);
}
@@ -390,13 +326,13 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
int wait_for_DQ7(flash_info_t * info, int sect)
{
ulong start, now, last;
- volatile FLASH_WORD_SIZE *addr =
- (FLASH_WORD_SIZE *) (info->start[sect]);
+ volatile CFG_FLASH_WORD_SIZE *addr =
+ (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
start = get_timer(0);
last = start;
- while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) !=
- (FLASH_WORD_SIZE) 0x00800080) {
+ while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+ (CFG_FLASH_WORD_SIZE) 0x00800080) {
if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
printf("Timeout\n");
return -1;
@@ -410,13 +346,10 @@ int wait_for_DQ7(flash_info_t * info, int sect)
return 0;
}
-/*-----------------------------------------------------------------------
- */
-
int flash_erase(flash_info_t * info, int s_first, int s_last)
{
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
- volatile FLASH_WORD_SIZE *addr2;
+ volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *addr2;
int flag, prot, sect, l_sect;
int i;
@@ -456,24 +389,24 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
/* Start erase on unprotected sectors */
for (sect = s_first; sect <= s_last; sect++) {
if (info->protect[sect] == 0) { /* not protected */
- addr2 = (FLASH_WORD_SIZE *) (info->start[sect]);
+ addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[0] = (FLASH_WORD_SIZE) 0x00500050; /* block erase */
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050; /* block erase */
for (i = 0; i < 50; i++)
udelay(1000); /* wait 1 ms */
} else {
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[0] = (FLASH_WORD_SIZE) 0x00300030; /* sector erase */
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+ addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030; /* sector erase */
}
l_sect = sect;
/*
@@ -495,8 +428,8 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
udelay(1000);
/* reset to read mode */
- addr = (FLASH_WORD_SIZE *) info->start[0];
- addr[0] = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
+ addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
+ addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
printf(" done\n");
return 0;
@@ -513,29 +446,29 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
ulong cp, wp, data;
int i, l, rc;
- wp = (addr & ~3); /* get lower word aligned address */
+ wp = (addr & ~3); /* get lower word aligned address */
/*
* handle unaligned start bytes
*/
if ((l = addr - wp) != 0) {
data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
- for (; i < 4 && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
+ for (i = 0, cp = wp; i < l; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+ for (; i < 4 && cnt > 0; ++i) {
+ data = (data << 8) | *src++;
+ --cnt;
+ ++cp;
+ }
+ for (; cnt == 0 && i < 4; ++i, ++cp) {
+ data = (data << 8) | (*(uchar *) cp);
+ }
+
+ if ((rc = write_word(info, wp, data)) != 0) {
+ return (rc);
+ }
+ wp += 4;
}
/*
@@ -580,27 +513,26 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
*/
static int write_word(flash_info_t * info, ulong dest, ulong data)
{
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
- volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
- volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
+ volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+ volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
+ volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
ulong start;
int i;
/* Check if Flash is (sufficiently) erased */
- if ((*((volatile FLASH_WORD_SIZE *) dest) &
- (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
+ if ((*((vu_long *)dest) & data) != data) {
return (2);
}
- for (i = 0; i < 4 / sizeof(FLASH_WORD_SIZE); i++) {
+ for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
int flag;
/* Disable interrupts which might cause a timeout here */
flag = disable_interrupts();
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+ addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+ addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
dest2[i] = data2[i];
@@ -610,8 +542,8 @@ static int write_word(flash_info_t * info, ulong dest, ulong data)
/* data polling for D7 */
start = get_timer(0);
- while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
- (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
+ while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+ (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
return (1);
diff --git a/board/ebony/Makefile b/board/amcc/ebony/Makefile
index 4a3927b..4a3927b 100644
--- a/board/ebony/Makefile
+++ b/board/amcc/ebony/Makefile
diff --git a/board/ebony/config.mk b/board/amcc/ebony/config.mk
index 84e3e52..e5722dd 100644
--- a/board/ebony/config.mk
+++ b/board/amcc/ebony/config.mk
@@ -30,7 +30,7 @@
ifeq ($(ramsym),1)
TEXT_BASE = 0x07FD0000
else
-TEXT_BASE = 0xFFF80000
+TEXT_BASE = 0xFFFC0000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
diff --git a/board/ebony/ebony.c b/board/amcc/ebony/ebony.c
index a5b3fb6..f6bb837 100644
--- a/board/ebony/ebony.c
+++ b/board/amcc/ebony/ebony.c
@@ -20,9 +20,7 @@
* MA 02111-1307 USA
*/
-
#include <common.h>
-#include "ebony.h"
#include <asm/processor.h>
#include <spd_sdram.h>
@@ -30,99 +28,102 @@
#define FLASH_ONBD_N 2 /* 00000010 */
#define FLASH_SRAM_SEL 1 /* 00000001 */
-long int fixed_sdram (void);
+long int fixed_sdram(void);
-int board_early_init_f (void)
+int board_early_init_f(void)
{
uint reg;
- unsigned char *fpga_base = (unsigned char *) CFG_FPGA_BASE;
+ unsigned char *fpga_base = (unsigned char *)CFG_FPGA_BASE;
unsigned char status;
-
/*--------------------------------------------------------------------
* Setup the external bus controller/chip selects
*-------------------------------------------------------------------*/
- mtdcr (ebccfga, xbcfg);
- reg = mfdcr (ebccfgd);
- mtdcr (ebccfgd, reg | 0x04000000); /* Set ATC */
+ mtdcr(ebccfga, xbcfg);
+ reg = mfdcr(ebccfgd);
+ mtdcr(ebccfgd, reg | 0x04000000); /* Set ATC */
- mtebc (pb1ap, 0x02815480); /* NVRAM/RTC */
- mtebc (pb1cr, 0x48018000); /* BA=0x480 1MB R/W 8-bit */
- mtebc (pb7ap, 0x01015280); /* FPGA registers */
- mtebc (pb7cr, 0x48318000); /* BA=0x483 1MB R/W 8-bit */
+ mtebc(pb1ap, 0x02815480); /* NVRAM/RTC */
+ mtebc(pb1cr, 0x48018000); /* BA=0x480 1MB R/W 8-bit */
+ mtebc(pb7ap, 0x01015280); /* FPGA registers */
+ mtebc(pb7cr, 0x48318000); /* BA=0x483 1MB R/W 8-bit */
/* read FPGA_REG0 and set the bus controller */
status = *fpga_base;
if ((status & BOOT_SMALL_FLASH) && !(status & FLASH_ONBD_N)) {
- mtebc (pb0ap, 0x9b015480); /* FLASH/SRAM */
- mtebc (pb0cr, 0xfff18000); /* BAS=0xfff 1MB R/W 8-bit */
- mtebc (pb2ap, 0x9b015480); /* 4MB FLASH */
- mtebc (pb2cr, 0xff858000); /* BAS=0xff8 4MB R/W 8-bit */
+ mtebc(pb0ap, 0x9b015480); /* FLASH/SRAM */
+ mtebc(pb0cr, 0xfff18000); /* BAS=0xfff 1MB R/W 8-bit */
+ mtebc(pb2ap, 0x9b015480); /* 4MB FLASH */
+ mtebc(pb2cr, 0xff858000); /* BAS=0xff8 4MB R/W 8-bit */
} else {
- mtebc (pb0ap, 0x9b015480); /* 4MB FLASH */
- mtebc (pb0cr, 0xffc58000); /* BAS=0xffc 4MB R/W 8-bit */
+ mtebc(pb0ap, 0x9b015480); /* 4MB FLASH */
+ mtebc(pb0cr, 0xffc58000); /* BAS=0xffc 4MB R/W 8-bit */
/* set CS2 if FLASH_ONBD_N == 0 */
if (!(status & FLASH_ONBD_N)) {
- mtebc (pb2ap, 0x9b015480); /* FLASH/SRAM */
- mtebc (pb2cr, 0xff818000); /* BAS=0xff8 4MB R/W 8-bit */
+ mtebc(pb2ap, 0x9b015480); /* FLASH/SRAM */
+ mtebc(pb2cr, 0xff818000); /* BAS=0xff8 4MB R/W 8-bit */
}
}
/*--------------------------------------------------------------------
* Setup the interrupt controller polarities, triggers, etc.
*-------------------------------------------------------------------*/
- mtdcr (uic0sr, 0xffffffff); /* clear all */
- mtdcr (uic0er, 0x00000000); /* disable all */
- mtdcr (uic0cr, 0x00000009); /* SMI & UIC1 crit are critical */
- mtdcr (uic0pr, 0xfffffe13); /* per ref-board manual */
- mtdcr (uic0tr, 0x01c00008); /* per ref-board manual */
- mtdcr (uic0vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic0sr, 0xffffffff); /* clear all */
-
- mtdcr (uic1sr, 0xffffffff); /* clear all */
- mtdcr (uic1er, 0x00000000); /* disable all */
- mtdcr (uic1cr, 0x00000000); /* all non-critical */
- mtdcr (uic1pr, 0xffffe0ff); /* per ref-board manual */
- mtdcr (uic1tr, 0x00ffc000); /* per ref-board manual */
- mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
- mtdcr (uic1sr, 0xffffffff); /* clear all */
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+ mtdcr(uic0er, 0x00000000); /* disable all */
+ mtdcr(uic0cr, 0x00000009); /* SMI & UIC1 crit are critical */
+ mtdcr(uic0pr, 0xfffffe13); /* per ref-board manual */
+ mtdcr(uic0tr, 0x01c00008); /* per ref-board manual */
+ mtdcr(uic0vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(uic0sr, 0xffffffff); /* clear all */
+
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
+ mtdcr(uic1er, 0x00000000); /* disable all */
+ mtdcr(uic1cr, 0x00000000); /* all non-critical */
+ mtdcr(uic1pr, 0xffffe0ff); /* per ref-board manual */
+ mtdcr(uic1tr, 0x00ffc000); /* per ref-board manual */
+ mtdcr(uic1vr, 0x00000001); /* int31 highest, base=0x000 */
+ mtdcr(uic1sr, 0xffffffff); /* clear all */
return 0;
}
-
-int checkboard (void)
+int checkboard(void)
{
sys_info_t sysinfo;
+ unsigned char *s = getenv("serial#");
- get_sys_info (&sysinfo);
+ get_sys_info(&sysinfo);
- printf ("Board: IBM 440GP Evaluation Board (Ebony)\n");
- printf ("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
- printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
- printf ("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
- printf ("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
- printf ("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
+ printf("Board: Ebony - AMCC PPC440GP Evaluation Board");
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
+ printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+ printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+ printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+ printf("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
return (0);
}
-
-long int initdram (int board_type)
+long int initdram(int board_type)
{
long dram_size = 0;
#if defined(CONFIG_SPD_EEPROM)
- dram_size = spd_sdram (0);
+ dram_size = spd_sdram(0);
#else
- dram_size = fixed_sdram ();
+ dram_size = fixed_sdram();
#endif
return dram_size;
}
-
#if defined(CFG_DRAM_TEST)
-int testdram (void)
+int testdram(void)
{
uint *pstart = (uint *) 0x00000000;
uint *pend = (uint *) 0x08000000;
@@ -133,7 +134,7 @@ int testdram (void)
for (p = pstart; p < pend; p++) {
if (*p != 0xaaaaaaaa) {
- printf ("SDRAM test fails at: %08x\n", (uint) p);
+ printf("SDRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
@@ -143,7 +144,7 @@ int testdram (void)
for (p = pstart; p < pend; p++) {
if (*p != 0x55555555) {
- printf ("SDRAM test fails at: %08x\n", (uint) p);
+ printf("SDRAM test fails at: %08x\n", (uint) p);
return 1;
}
}
@@ -159,18 +160,18 @@ int testdram (void)
* PLB @ 133 MHz
*
************************************************************************/
-long int fixed_sdram (void)
+long int fixed_sdram(void)
{
uint reg;
/*--------------------------------------------------------------------
* Setup some default
*------------------------------------------------------------------*/
- mtsdram (mem_uabba, 0x00000000); /* ubba=0 (default) */
- mtsdram (mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
- mtsdram (mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
- mtsdram (mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */
- mtsdram (mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
+ mtsdram(mem_uabba, 0x00000000); /* ubba=0 (default) */
+ mtsdram(mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
+ mtsdram(mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
+ mtsdram(mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */
+ mtsdram(mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
/*--------------------------------------------------------------------
* Setup for board-specific specific mem
@@ -178,28 +179,27 @@ long int fixed_sdram (void)
/*
* Following for CAS Latency = 2.5 @ 133 MHz PLB
*/
- mtsdram (mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
- mtsdram (mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
+ mtsdram(mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
+ mtsdram(mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
/* RA=10 RD=3 */
- mtsdram (mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
- mtsdram (mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
- mtsdram (mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
- udelay (400); /* Delay 200 usecs (min) */
+ mtsdram(mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
+ mtsdram(mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
+ mtsdram(mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
+ udelay(400); /* Delay 200 usecs (min) */
/*--------------------------------------------------------------------
* Enable the controller, then wait for DCEN to complete
*------------------------------------------------------------------*/
- mtsdram (mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
+ mtsdram(mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
for (;;) {
- mfsdram (mem_mcsts, reg);
+ mfsdram(mem_mcsts, reg);
if (reg & 0x80000000)
break;
}
return (128 * 1024 * 1024); /* 128 MB */
}
-#endif /* !defined(CONFIG_SPD_EEPROM) */
-
+#endif /* !defined(CONFIG_SPD_EEPROM) */
/*************************************************************************
* pci_pre_init
@@ -214,23 +214,23 @@ long int fixed_sdram (void)
*
************************************************************************/
#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
-int pci_pre_init(struct pci_controller * hose )
+int pci_pre_init(struct pci_controller *hose)
{
- unsigned long strap;
+ unsigned long strap;
/*--------------------------------------------------------------------------+
* The ebony board is always configured as the host & requires the
* PCI arbiter to be enabled.
*--------------------------------------------------------------------------*/
- strap = mfdcr(cpc0_strp1);
- if( (strap & 0x00100000) == 0 ){
- printf("PCI: CPC0_STRP1[PAE] not set.\n");
- return 0;
- }
+ strap = mfdcr(cpc0_strp1);
+ if ((strap & 0x00100000) == 0) {
+ printf("PCI: CPC0_STRP1[PAE] not set.\n");
+ return 0;
+ }
- return 1;
+ return 1;
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
/*************************************************************************
* pci_target_init
@@ -241,38 +241,37 @@ int pci_pre_init(struct pci_controller * hose )
*
************************************************************************/
#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
-void pci_target_init(struct pci_controller * hose )
+void pci_target_init(struct pci_controller *hose)
{
DECLARE_GLOBAL_DATA_PTR;
/*--------------------------------------------------------------------------+
* Disable everything
*--------------------------------------------------------------------------*/
- out32r( PCIX0_PIM0SA, 0 ); /* disable */
- out32r( PCIX0_PIM1SA, 0 ); /* disable */
- out32r( PCIX0_PIM2SA, 0 ); /* disable */
- out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+ out32r(PCIX0_PIM0SA, 0); /* disable */
+ out32r(PCIX0_PIM1SA, 0); /* disable */
+ out32r(PCIX0_PIM2SA, 0); /* disable */
+ out32r(PCIX0_EROMBA, 0); /* disable expansion rom */
/*--------------------------------------------------------------------------+
* Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
* options to not support sizes such as 128/256 MB.
*--------------------------------------------------------------------------*/
- out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
- out32r( PCIX0_PIM0LAH, 0 );
- out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+ out32r(PCIX0_PIM0LAL, CFG_SDRAM_BASE);
+ out32r(PCIX0_PIM0LAH, 0);
+ out32r(PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
- out32r( PCIX0_BAR0, 0 );
+ out32r(PCIX0_BAR0, 0);
/*--------------------------------------------------------------------------+
* Program the board's subsystem id/vendor id
*--------------------------------------------------------------------------*/
- out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
- out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+ out16r(PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID);
+ out16r(PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID);
- out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
+ out16r(PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
}
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
-
+#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
/*************************************************************************
* is_pci_host
@@ -292,7 +291,7 @@ void pci_target_init(struct pci_controller * hose )
#if defined(CONFIG_PCI)
int is_pci_host(struct pci_controller *hose)
{
- /* The ebony board is always configured as host. */
- return(1);
+ /* The ebony board is always configured as host. */
+ return (1);
}
-#endif /* defined(CONFIG_PCI) */
+#endif /* defined(CONFIG_PCI) */
diff --git a/board/amcc/ebony/flash.c b/board/amcc/ebony/flash.c
new file mode 100644
index 0000000..e8fbbc4
--- /dev/null
+++ b/board/amcc/ebony/flash.c
@@ -0,0 +1,140 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
+ * Add support for Am29F016D and dynamic switch setting.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif /* DEBUG */
+
+#define BOOT_SMALL_FLASH 32 /* 00100000 */
+#define FLASH_ONBD_N 2 /* 00000010 */
+#define FLASH_SRAM_SEL 1 /* 00000001 */
+
+#define BOOT_SMALL_FLASH_VAL 4
+#define FLASH_ONBD_N_VAL 2
+#define FLASH_SRAM_SEL_VAL 1
+
+static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
+ {0xffc00000, 0xffe00000, 0xff880000}, /* 0:000: configuraton 3 */
+ {0xffc00000, 0xffe00000, 0xff800000}, /* 1:001: configuraton 4 */
+ {0xffc00000, 0xffe00000, 0x00000000}, /* 2:010: configuraton 7 */
+ {0xffc00000, 0xffe00000, 0x00000000}, /* 3:011: configuraton 8 */
+ {0xff800000, 0xffa00000, 0xfff80000}, /* 4:100: configuraton 1 */
+ {0xff800000, 0xffa00000, 0xfff00000}, /* 5:101: configuraton 2 */
+ {0xffc00000, 0xffe00000, 0x00000000}, /* 6:110: configuraton 5 */
+ {0xffc00000, 0xffe00000, 0x00000000} /* 7:111: configuraton 6 */
+};
+
+/*
+ * include common flash code (for amcc boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+
+unsigned long flash_init(void)
+{
+ unsigned long total_b = 0;
+ unsigned long size_b[CFG_MAX_FLASH_BANKS];
+ unsigned char *fpga_base = (unsigned char *)CFG_FPGA_BASE;
+ unsigned char switch_status;
+ unsigned short index = 0;
+ int i;
+
+ /* read FPGA base register FPGA_REG0 */
+ switch_status = *fpga_base;
+
+ /* check the bitmap of switch status */
+ if (switch_status & BOOT_SMALL_FLASH) {
+ index += BOOT_SMALL_FLASH_VAL;
+ }
+ if (switch_status & FLASH_ONBD_N) {
+ index += FLASH_ONBD_N_VAL;
+ }
+ if (switch_status & FLASH_SRAM_SEL) {
+ index += FLASH_SRAM_SEL_VAL;
+ }
+
+ DEBUGF("\n");
+ DEBUGF("FLASH: Index: %d\n", index);
+
+ /* Init: no FLASHes known */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+
+ /* check whether the address is 0 */
+ if (flash_addr_table[index][i] == 0) {
+ continue;
+ }
+
+ /* call flash_get_size() to initialize sector address */
+ size_b[i] = flash_get_size((vu_long *)
+ flash_addr_table[index][i],
+ &flash_info[i]);
+ flash_info[i].size = size_b[i];
+ if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+ printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+ i, size_b[i], size_b[i] << 20);
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+ }
+
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ &flash_info[2]);
+#ifdef CFG_ENV_IS_IN_FLASH
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[2]);
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[2]);
+#endif
+
+ total_b += flash_info[i].size;
+ }
+
+ return total_b;
+}
diff --git a/board/ebony/init.S b/board/amcc/ebony/init.S
index cc8f8b4..cc8f8b4 100644
--- a/board/ebony/init.S
+++ b/board/amcc/ebony/init.S
diff --git a/board/ebony/u-boot.lds b/board/amcc/ebony/u-boot.lds
index 7ea7caf..0ec3fad 100644
--- a/board/ebony/u-boot.lds
+++ b/board/amcc/ebony/u-boot.lds
@@ -67,7 +67,7 @@ SECTIONS
/* the sector layout of our flash chips! XXX FIXME XXX */
cpu/ppc4xx/start.o (.text)
- board/ebony/init.o (.text)
+ board/amcc/ebony/init.o (.text)
cpu/ppc4xx/kgdb.o (.text)
cpu/ppc4xx/traps.o (.text)
cpu/ppc4xx/interrupts.o (.text)
diff --git a/board/ocotea/Makefile b/board/amcc/ocotea/Makefile
index af223d2..af223d2 100644
--- a/board/ocotea/Makefile
+++ b/board/amcc/ocotea/Makefile
diff --git a/board/ocotea/config.mk b/board/amcc/ocotea/config.mk
index 5543a4e..5543a4e 100644
--- a/board/ocotea/config.mk
+++ b/board/amcc/ocotea/config.mk
diff --git a/board/amcc/ocotea/flash.c b/board/amcc/ocotea/flash.c
new file mode 100644
index 0000000..5614e20
--- /dev/null
+++ b/board/amcc/ocotea/flash.c
@@ -0,0 +1,150 @@
+/*
+ * (C) Copyright 2004-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
+ * Add support for Am29F016D and dynamic switch setting.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif /* DEBUG */
+
+#define BOOT_SMALL_FLASH 0x40 /* 01000000 */
+#define FLASH_ONBD_N 2 /* 00000010 */
+#define FLASH_SRAM_SEL 1 /* 00000001 */
+#define FLASH_ONBD_N 2 /* 00000010 */
+#define FLASH_SRAM_SEL 1 /* 00000001 */
+
+#define BOOT_SMALL_FLASH_VAL 4
+#define FLASH_ONBD_N_VAL 2
+#define FLASH_SRAM_SEL_VAL 1
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
+ {0xFF800000, 0xFF880000, 0xFFC00000}, /* 0:000: configuraton 4 */
+ {0xFF900000, 0xFF980000, 0xFFC00000}, /* 1:001: configuraton 3 */
+ {0x00000000, 0x00000000, 0x00000000}, /* 2:010: configuraton 8 */
+ {0x00000000, 0x00000000, 0x00000000}, /* 3:011: configuraton 7 */
+ {0xFFE00000, 0xFFF00000, 0xFF800000}, /* 4:100: configuraton 2 */
+ {0xFFF00000, 0xFFF80000, 0xFF800000}, /* 5:101: configuraton 1 */
+ {0x00000000, 0x00000000, 0x00000000}, /* 6:110: configuraton 6 */
+ {0x00000000, 0x00000000, 0x00000000} /* 7:111: configuraton 5 */
+};
+
+/*
+ * include common flash code (for amcc boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+static int write_word(flash_info_t * info, ulong dest, ulong data);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init(void)
+{
+ unsigned long total_b = 0;
+ unsigned long size_b[CFG_MAX_FLASH_BANKS];
+ unsigned char *fpga_base = (unsigned char *)CFG_FPGA_BASE;
+ unsigned char switch_status;
+ unsigned short index = 0;
+ int i;
+
+ /* read FPGA base register FPGA_REG0 */
+ switch_status = *fpga_base;
+
+ /* check the bitmap of switch status */
+ if (switch_status & BOOT_SMALL_FLASH) {
+ index += BOOT_SMALL_FLASH_VAL;
+ }
+ if (switch_status & FLASH_ONBD_N) {
+ index += FLASH_ONBD_N_VAL;
+ }
+ if (switch_status & FLASH_SRAM_SEL) {
+ index += FLASH_SRAM_SEL_VAL;
+ }
+
+ DEBUGF("\n");
+ DEBUGF("FLASH: Index: %d\n", index);
+
+ /* Init: no FLASHes known */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+
+ /* check whether the address is 0 */
+ if (flash_addr_table[index][i] == 0) {
+ continue;
+ }
+
+ /* call flash_get_size() to initialize sector address */
+ size_b[i] =
+ flash_get_size((vu_long *) flash_addr_table[index][i],
+ &flash_info[i]);
+ flash_info[i].size = size_b[i];
+ if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+ printf
+ ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+ i, size_b[i], size_b[i] << 20);
+ flash_info[i].sector_count = -1;
+ flash_info[i].size = 0;
+ }
+
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ &flash_info[i]);
+#ifdef CFG_ENV_IS_IN_FLASH
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[i]);
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[i]);
+#endif
+
+ total_b += flash_info[i].size;
+ }
+
+ return total_b;
+}
diff --git a/board/ocotea/init.S b/board/amcc/ocotea/init.S
index e33427a..e33427a 100644
--- a/board/ocotea/init.S
+++ b/board/amcc/ocotea/init.S
diff --git a/board/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c
index 1c532a3..5f436ea 100644
--- a/board/ocotea/ocotea.c
+++ b/board/amcc/ocotea/ocotea.c
@@ -1,6 +1,9 @@
/*
* Copyright (C) 2004 PaulReynolds@lhsolutions.com
*
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -184,10 +187,17 @@ int board_early_init_f (void)
int checkboard (void)
{
sys_info_t sysinfo;
+ unsigned char *s = getenv ("serial#");
get_sys_info (&sysinfo);
- printf ("Board: IBM 440GX Evaluation Board\n");
+ printf ("Board: Ocotea - AMCC PPC440GX Evaluation Board");
+ if (s != NULL) {
+ puts (", serial# ");
+ puts (s);
+ }
+ putc ('\n');
+
printf ("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
printf ("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
diff --git a/board/ocotea/ocotea.h b/board/amcc/ocotea/ocotea.h
index 41bd450..41bd450 100644
--- a/board/ocotea/ocotea.h
+++ b/board/amcc/ocotea/ocotea.h
diff --git a/board/ocotea/u-boot.lds b/board/amcc/ocotea/u-boot.lds
index 8a54617..a985246 100644
--- a/board/ocotea/u-boot.lds
+++ b/board/amcc/ocotea/u-boot.lds
@@ -67,7 +67,7 @@ SECTIONS
/* the sector layout of our flash chips! XXX FIXME XXX */
cpu/ppc4xx/start.o (.text)
- board/ocotea/init.o (.text)
+ board/amcc/ocotea/init.o (.text)
cpu/ppc4xx/kgdb.o (.text)
cpu/ppc4xx/traps.o (.text)
cpu/ppc4xx/interrupts.o (.text)
diff --git a/board/walnut405/Makefile b/board/amcc/walnut/Makefile
index 97d6a1e..f5bda55 100644
--- a/board/walnut405/Makefile
+++ b/board/amcc/walnut/Makefile
@@ -26,7 +26,6 @@ include $(TOPDIR)/config.mk
LIB = lib$(BOARD).a
OBJS = $(BOARD).o flash.o
-SOBJS = init.o
$(LIB): $(OBJS) $(SOBJS)
$(AR) crv $@ $(OBJS)
diff --git a/board/bubinga405ep/config.mk b/board/amcc/walnut/config.mk
index 8426bb3..1bdf5e4 100644
--- a/board/bubinga405ep/config.mk
+++ b/board/amcc/walnut/config.mk
@@ -21,9 +21,4 @@
# MA 02111-1307 USA
#
-#
-# esd ADCIOP boards
-#
-
-#TEXT_BASE = 0xFFFE0000
-TEXT_BASE = 0xFFF80000
+TEXT_BASE = 0xFFFC0000
diff --git a/board/amcc/walnut/flash.c b/board/amcc/walnut/flash.c
new file mode 100644
index 0000000..056f9b9
--- /dev/null
+++ b/board/amcc/walnut/flash.c
@@ -0,0 +1,199 @@
+/*
+ * (C) Copyright 2000-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif /* DEBUG */
+
+/*
+ * include common flash code (for amcc boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+static void flash_get_offsets(ulong base, flash_info_t * info);
+
+unsigned long flash_init(void)
+{
+ unsigned long size_b0, size_b1;
+ int i;
+ uint pbcr;
+ unsigned long base_b0, base_b1;
+
+ /* Init: no FLASHes known */
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+ flash_info[i].flash_id = FLASH_UNKNOWN;
+ }
+
+ /* Static FLASH Bank configuration here - FIXME XXX */
+
+ size_b0 =
+ flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+ printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+ size_b0, size_b0 << 20);
+ }
+
+ /* Only one bank */
+ if (CFG_MAX_FLASH_BANKS == 1) {
+ /* Setup offsets */
+ flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]);
+
+ /* Monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ CFG_MONITOR_BASE,
+ CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+ &flash_info[0]);
+#ifdef CFG_ENV_IS_IN_FLASH
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+ (void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+ CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+ &flash_info[0]);
+#endif
+
+ size_b1 = 0;
+ flash_info[0].size = size_b0;
+ } else {
+ /* 2 banks */
+ size_b1 =
+ flash_get_size((vu_long *) FLASH_BASE1_PRELIM,
+ &flash_info[1]);
+
+ /* Re-do sizing to get full correct info */
+
+ if (size_b1) {
+ mtdcr(ebccfga, pb0cr);
+ pbcr = mfdcr(ebccfgd);
+ mtdcr(ebccfga, pb0cr);
+ base_b1 = -size_b1;
+ pbcr =
+ (pbcr & 0x0001ffff) | base_b1 |
+ (((size_b1 / 1024 / 1024) - 1) << 17);
+ mtdcr(ebccfgd, pbcr);
+ /* printf("pb1cr = %x\n", pbcr); */
+ }
+
+ if (size_b0) {
+ mtdcr(ebccfga, pb1cr);
+ pbcr = mfdcr(ebccfgd);
+ mtdcr(ebccfga, pb1cr);
+ base_b0 = base_b1 - size_b0;
+ pbcr =
+ (pbcr & 0x0001ffff) | base_b0 |
+ (((size_b0 / 1024 / 1024) - 1) << 17);
+ mtdcr(ebccfgd, pbcr);
+ /* printf("pb0cr = %x\n", pbcr); */
+ }
+
+ size_b0 = flash_get_size((vu_long *) base_b0, &flash_info[0]);
+
+ flash_get_offsets(base_b0, &flash_info[0]);
+
+ /* monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ base_b0 + size_b0 - monitor_flash_len,
+ base_b0 + size_b0 - 1, &flash_info[0]);
+
+ if (size_b1) {
+ /* Re-do sizing to get full correct info */
+ size_b1 =
+ flash_get_size((vu_long *) base_b1, &flash_info[1]);
+
+ flash_get_offsets(base_b1, &flash_info[1]);
+
+ /* monitor protection ON by default */
+ (void)flash_protect(FLAG_PROTECT_SET,
+ base_b1 + size_b1 -
+ monitor_flash_len,
+ base_b1 + size_b1 - 1,
+ &flash_info[1]);
+ /* monitor protection OFF by default (one is enough) */
+ (void)flash_protect(FLAG_PROTECT_CLEAR,
+ base_b0 + size_b0 -
+ monitor_flash_len,
+ base_b0 + size_b0 - 1,
+ &flash_info[0]);
+ } else {
+ flash_info[1].flash_id = FLASH_UNKNOWN;
+ flash_info[1].sector_count = -1;
+ }
+
+ flash_info[0].size = size_b0;
+ flash_info[1].size = size_b1;
+ } /* else 2 banks */
+ return (size_b0 + size_b1);
+}
+
+
+static void flash_get_offsets(ulong base, flash_info_t * info)
+{
+ int i;
+
+ /* set up sector start address table */
+ if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+ (info->flash_id == FLASH_AM040)) {
+ for (i = 0; i < info->sector_count; i++)
+ info->start[i] = base + (i * 0x00010000);
+ } else {
+ if (info->flash_id & FLASH_BTYPE) {
+ /* set sector offsets for bottom boot block type */
+ info->start[0] = base + 0x00000000;
+ info->start[1] = base + 0x00004000;
+ info->start[2] = base + 0x00006000;
+ info->start[3] = base + 0x00008000;
+ for (i = 4; i < info->sector_count; i++) {
+ info->start[i] =
+ base + (i * 0x00010000) - 0x00030000;
+ }
+ } else {
+ /* set sector offsets for top boot block type */
+ i = info->sector_count - 1;
+ info->start[i--] = base + info->size - 0x00004000;
+ info->start[i--] = base + info->size - 0x00006000;
+ info->start[i--] = base + info->size - 0x00008000;
+ for (; i >= 0; i--) {
+ info->start[i] = base + i * 0x00010000;
+ }
+ }
+ }
+}
diff --git a/board/walnut405/u-boot.lds b/board/amcc/walnut/u-boot.lds
index 7a75f6a..7107880 100644
--- a/board/walnut405/u-boot.lds
+++ b/board/amcc/walnut/u-boot.lds
@@ -62,7 +62,6 @@ SECTIONS
/* the sector layout of our flash chips! XXX FIXME XXX */
cpu/ppc4xx/start.o (.text)
- board/walnut405/init.o (.text)
cpu/ppc4xx/kgdb.o (.text)
cpu/ppc4xx/traps.o (.text)
cpu/ppc4xx/interrupts.o (.text)
diff --git a/board/amcc/walnut/walnut.c b/board/amcc/walnut/walnut.c
new file mode 100644
index 0000000..9fca0a6
--- /dev/null
+++ b/board/amcc/walnut/walnut.c
@@ -0,0 +1,111 @@
+/*
+ * (C) Copyright 2000-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <spd_sdram.h>
+
+int board_early_init_f(void)
+{
+ /*-------------------------------------------------------------------------+
+ | Interrupt controller setup for the Walnut/Sycamore board.
+ | Note: IRQ 0-15 405GP internally generated; active high; level sensitive
+ | IRQ 16 405GP internally generated; active low; level sensitive
+ | IRQ 17-24 RESERVED
+ | IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
+ | IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
+ | IRQ 27 (EXT IRQ 2) Not Used
+ | IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
+ | IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
+ | IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
+ | IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
+ | Note for Walnut board:
+ | An interrupt taken for the FPGA (IRQ 25) indicates that either
+ | the Mouse, Keyboard, IRDA, or External Expansion caused the
+ | interrupt. The FPGA must be read to determine which device
+ | caused the interrupt. The default setting of the FPGA clears
+ |
+ +-------------------------------------------------------------------------*/
+
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicer, 0x00000000); /* disable all ints */
+ mtdcr(uiccr, 0x00000020); /* set all but FPGA SMI to be non-critical */
+ mtdcr(uicpr, 0xFFFFFFE0); /* set int polarities */
+ mtdcr(uictr, 0x10000000); /* set int trigger levels */
+ mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+
+ /* set UART1 control to select CTS/RTS */
+#define FPGA_BRDC 0xF0300004
+ *(volatile char *)(FPGA_BRDC) |= 0x1;
+
+ return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+ unsigned char *s = getenv("serial#");
+ uint pvr = get_pvr();
+
+ if (pvr == PVR_405GPR_RB) {
+ puts("Board: Sycamore - AMCC PPC405GPr Evaluation Board");
+ } else {
+ puts("Board: Walnut - AMCC PPC405GP Evaluation Board");
+ }
+
+ if (s != NULL) {
+ puts(", serial# ");
+ puts(s);
+ }
+ putc('\n');
+
+ return (0);
+}
+
+/*
+ * sdram_init - Dummy implementation for start.S, spd_sdram used on this board!
+ */
+void sdram_init(void)
+{
+ return;
+}
+
+/*
+ * initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
+ * the necessary info for SDRAM controller configuration
+ */
+long int initdram(int board_type)
+{
+ return spd_sdram(0);
+}
+
+int testdram(void)
+{
+ /* TODO: XXX XXX XXX */
+ printf("test: xxx MB - ok\n");
+
+ return (0);
+}
diff --git a/board/bubinga405ep/bubinga405ep.c b/board/bubinga405ep/bubinga405ep.c
deleted file mode 100644
index 0be7965..0000000
--- a/board/bubinga405ep/bubinga405ep.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-long int spd_sdram (void);
-
-#include <common.h>
-#include <asm/processor.h>
-
-
-int board_early_init_f (void)
-{
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr (uicer, 0x00000000); /* disable all ints */
- mtdcr (uiccr, 0x00000010);
- mtdcr (uicpr, 0xFFFF7FF0); /* set int polarities */
- mtdcr (uictr, 0x00000010); /* set int trigger levels */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
-
-#if 0
-#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
- /* CS1 */
- /* BAS=0xF00,BS=0x0(1MB),BU=0x3(R/W),BW=0x0( 8 bits) */
- mtebc (pb1ap, 0x02815480);
- mtebc (pb1cr, 0xF0018000);
-
- p = (unsigned int*)0xEF600708;
- t = *p;
- t = t | 0x00000400;
- *p = t;
-
- /* BAS=0xF01,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
- mtebc (pb2ap, 0x04815A80);
- mtebc (pb2cr, 0xF0118000);
-
- /* BAS=0xF02,BS=0x0(1MB),BU=0x3(R/W),BW=0x0( 8 bits) */
- mtebc (pb3ap, 0x01815280);
- mtebc (pb3cr, 0xF0218000);
-
- /* BAS=0xF03,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
- mtebc (pb7ap, 0x01815280);
- mtebc (pb7cr, 0xF0318000);
-
-
- /* set UART1 control to select CTS/RTS */
-#define FPGA_BRDC 0xF0300004
- *(volatile char *) (FPGA_BRDC) |= 0x1;
-
-#endif
-
- return 0;
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
- unsigned char *s = getenv ("serial#");
-
- puts ("Board: IBM 405EP Eval Board");
-
- if (s != NULL) {
- puts (", serial# ");
- puts (s);
- }
- putc ('\n');
-
- return (0);
-}
-
-
-/* -------------------------------------------------------------------------
- initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
- the necessary info for SDRAM controller configuration
- ------------------------------------------------------------------------- */
-long int initdram (int board_type)
-{
- long int ret;
-
- ret = spd_sdram ();
- return ret;
-}
-
-/* ------------------------------------------------------------------------- */
-
-int testdram (void)
-{
- /* TODO: XXX XXX XXX */
- printf ("test: xxx MB - ok\n");
-
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/bubinga405ep/bubinga405ep.h b/board/bubinga405ep/bubinga405ep.h
deleted file mode 100644
index 5fc313a..0000000
--- a/board/bubinga405ep/bubinga405ep.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/****************************************************************************
- * FLASH Memory Map as used by TQ Monitor:
- *
- * Start Address Length
- * +-----------------------+ 0x4000_0000 Start of Flash -----------------
- * | MON8xx code | 0x4000_0100 Reset Vector
- * +-----------------------+ 0x400?_????
- * | (unused) |
- * +-----------------------+ 0x4001_FF00
- * | Ethernet Addresses | 0x78
- * +-----------------------+ 0x4001_FF78
- * | (Reserved for MON8xx) | 0x44
- * +-----------------------+ 0x4001_FFBC
- * | Lock Address | 0x04
- * +-----------------------+ 0x4001_FFC0 ^
- * | Hardware Information | 0x40 | MON8xx
- * +=======================+ 0x4002_0000 (sector border) -----------------
- * | Autostart Header | | Applications
- * | ... | v
- *
- *****************************************************************************/
diff --git a/board/bubinga405ep/flash.c b/board/bubinga405ep/flash.c
deleted file mode 100644
index 85179d0..0000000
--- a/board/bubinga405ep/flash.c
+++ /dev/null
@@ -1,737 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Modified 4/5/2001
- * Wait for completion of each sector erase command issued
- * 4/5/2001
- * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-#ifdef CONFIG_ADCIOP
-#define ADDR0 0x0aa9
-#define ADDR1 0x0556
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-#ifdef CONFIG_CPCI405
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned short
-#endif
-
-#ifdef CONFIG_WALNUT405
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-#ifdef CONFIG_BUBINGA405EP
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- unsigned long size_b0, size_b1;
- int i;
- uint pbcr;
- unsigned long base_b0, base_b1;
-
- /* Init: no FLASHes known */
- for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- size_b0 = flash_get_size ((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0 << 20);
- }
-
- /* Only one bank */
- if (CFG_MAX_FLASH_BANKS == 1) {
- /* Setup offsets */
- flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
-
- /* Monitor protection ON by default */
- (void) flash_protect (FLAG_PROTECT_SET,
- FLASH_BASE0_PRELIM,
- FLASH_BASE0_PRELIM + CFG_MONITOR_LEN - 1,
- &flash_info[0]);
- /* Also protect sector containing initial power-up instruction */
- (void) flash_protect (FLAG_PROTECT_SET,
- 0xFFFFFFFC, 0xFFFFFFFF, &flash_info[0]);
- size_b1 = 0;
- flash_info[0].size = size_b0;
- }
-
- /* 2 banks */
- else {
- size_b1 = flash_get_size ((vu_long *) FLASH_BASE1_PRELIM, &flash_info[1]);
-
- /* Re-do sizing to get full correct info */
-
- if (size_b1) {
- mtdcr (ebccfga, pb0cr);
- pbcr = mfdcr (ebccfgd);
- mtdcr (ebccfga, pb0cr);
- base_b1 = -size_b1;
- pbcr = (pbcr & 0x0001ffff) | base_b1 |
- (((size_b1 / 1024 / 1024) - 1) << 17);
- mtdcr (ebccfgd, pbcr);
- /* printf("pb1cr = %x\n", pbcr); */
- }
-
- if (size_b0) {
- mtdcr (ebccfga, pb1cr);
- pbcr = mfdcr (ebccfgd);
- mtdcr (ebccfga, pb1cr);
- base_b0 = base_b1 - size_b0;
- pbcr = (pbcr & 0x0001ffff) | base_b0 |
- (((size_b0 / 1024 / 1024) - 1) << 17);
- mtdcr (ebccfgd, pbcr);
- /* printf("pb0cr = %x\n", pbcr); */
- }
-
- size_b0 = flash_get_size ((vu_long *) base_b0, &flash_info[0]);
-
- flash_get_offsets (base_b0, &flash_info[0]);
-
- /* monitor protection ON by default */
- (void) flash_protect (FLAG_PROTECT_SET,
- base_b0 + size_b0 - CFG_MONITOR_LEN,
- base_b0 + size_b0 - 1, &flash_info[0]);
- /* Also protect sector containing initial power-up instruction */
- /* (flash_protect() checks address range - other call ignored) */
- (void) flash_protect (FLAG_PROTECT_SET,
- 0xFFFFFFFC, 0xFFFFFFFF, &flash_info[0]);
- (void) flash_protect (FLAG_PROTECT_SET,
- 0xFFFFFFFC, 0xFFFFFFFF, &flash_info[1]);
-
- if (size_b1) {
- /* Re-do sizing to get full correct info */
- size_b1 = flash_get_size ((vu_long *) base_b1, &flash_info[1]);
-
- flash_get_offsets (base_b1, &flash_info[1]);
-
- /* monitor protection ON by default */
- (void) flash_protect (FLAG_PROTECT_SET,
- base_b1 + size_b1 - CFG_MONITOR_LEN,
- base_b1 + size_b1 - 1,
- &flash_info[1]);
- /* monitor protection OFF by default (one is enough) */
- (void) flash_protect (FLAG_PROTECT_CLEAR,
- base_b0 + size_b0 - CFG_MONITOR_LEN,
- base_b0 + size_b0 - 1,
- &flash_info[0]);
- } else {
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[1].sector_count = -1;
- }
-
- flash_info[0].size = size_b0;
- flash_info[1].size = size_b1;
- } /* else 2 banks */
- return (size_b0 + size_b1);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
- int i;
-
- /* set up sector start address table */
- if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
- (info->flash_id == FLASH_AM040)) {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- } else {
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
- int i;
- int k;
- int size;
- int erased;
- volatile unsigned long *flash;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_SST: printf ("SST "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040: printf ("AM29F040 (512 Kbit, uniform sector size)\n");
- break;
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- case FLASH_SST800A: printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
- break;
- case FLASH_SST160A: printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld KB in %d Sectors\n",
- info->size >> 10, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
- /*
- * Check if whole sector is erased
- */
- if (i != (info->sector_count - 1))
- size = info->start[i + 1] - info->start[i];
- else
- size = info->start[0] + info->size - info->start[i];
- erased = 1;
- flash = (volatile unsigned long *) info->start[i];
- size = size >> 2; /* divide by 4 for longword access */
- for (k = 0; k < size; k++) {
- if (*flash++ != 0xffffffff) {
- erased = 0;
- break;
- }
- }
-
- if ((i % 5) == 0)
- printf ("\n ");
-#if 0 /* test-only */
- printf (" %08lX%s",
- info->start[i], info->protect[i] ? " (RO)" : " "
-#else
- printf (" %08lX%s%s",
- info->start[i],
- erased ? " E" : " ", info->protect[i] ? "RO " : " "
-#endif
- );
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (vu_long * addr, flash_info_t * info)
-{
- short i;
- FLASH_WORD_SIZE value;
- ulong base = (ulong) addr;
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr;
-
- /* Write auto select command: read Manufacturer ID */
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00900090;
-
-#ifdef CONFIG_ADCIOP
- value = addr2[2];
-#else
- value = addr2[0];
-#endif
-
- switch (value) {
- case (FLASH_WORD_SIZE) AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case (FLASH_WORD_SIZE) FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case (FLASH_WORD_SIZE) SST_MANUFACT:
- info->flash_id = FLASH_MAN_SST;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
-#ifdef CONFIG_ADCIOP
- value = addr2[0]; /* device ID */
- /* printf("\ndev_code=%x\n", value); */
-#else
- value = addr2[1]; /* device ID */
-#endif
-
- switch (value) {
- case (FLASH_WORD_SIZE) AMD_ID_F040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
- break;
- case (FLASH_WORD_SIZE) AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-#if 0 /* enable when device IDs are available */
- case (FLASH_WORD_SIZE) AMD_ID_LV320T:
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case (FLASH_WORD_SIZE) AMD_ID_LV320B:
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#endif
- case (FLASH_WORD_SIZE) SST_ID_xF800A:
- info->flash_id += FLASH_SST800A;
- info->sector_count = 16;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE) SST_ID_xF160A:
- info->flash_id += FLASH_SST160A;
- info->sector_count = 32;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- /* set up sector start address table */
- if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
- (info->flash_id == FLASH_AM040)) {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- } else {
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
-#ifdef CONFIG_ADCIOP
- addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]);
- info->protect[i] = addr2[4] & 1;
-#else
- addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]);
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
- info->protect[i] = 0;
- else
- info->protect[i] = addr2[2] & 1;
-#endif
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
-#if 0 /* test-only */
-#ifdef CONFIG_ADCIOP
- addr2 = (volatile unsigned char *) info->start[0];
- addr2[ADDR0] = 0xAA;
- addr2[ADDR1] = 0x55;
- addr2[ADDR0] = 0xF0; /* reset bank */
-#else
- addr2 = (FLASH_WORD_SIZE *) info->start[0];
- *addr2 = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
-#endif
-#else /* test-only */
- addr2 = (FLASH_WORD_SIZE *) info->start[0];
- *addr2 = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
-#endif /* test-only */
- }
-
- return (info->size);
-}
-
-int wait_for_DQ7 (flash_info_t * info, int sect)
-{
- ulong start, now, last;
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[sect]);
-
- start = get_timer (0);
- last = 0;
- while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) != (FLASH_WORD_SIZE) 0x00800080) {
- if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return -1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
- volatile FLASH_WORD_SIZE *addr2;
- int flag, prot, sect, l_sect;
- int i;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("Can't erase unknown flash type - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n", prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr2 = (FLASH_WORD_SIZE *) (info->start[sect]);
- printf ("Erasing sector %p\n", addr2); /* CLH */
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[0] = (FLASH_WORD_SIZE) 0x00500050; /* block erase */
- for (i = 0; i < 50; i++)
- udelay (1000); /* wait 1 ms */
- } else {
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[0] = (FLASH_WORD_SIZE) 0x00300030; /* sector erase */
- }
- l_sect = sect;
- /*
- * Wait for each sector to complete, it's more
- * reliable. According to AMD Spec, you must
- * issue all erase commands within a specified
- * timeout. This has been seen to fail, especially
- * if printf()s are included (for debug)!!
- */
- wait_for_DQ7 (info, sect);
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
-#if 0
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
- wait_for_DQ7 (info, l_sect);
-
- DONE:
-#endif
- /* reset to read mode */
- addr = (FLASH_WORD_SIZE *) info->start[0];
- addr[0] = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i = 0, cp = wp; i < l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
- for (; i < 4 && cnt > 0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt == 0 && i < 4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i = 0; i < 4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word (info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i < 4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *) cp);
- }
-
- return (write_word (info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
- volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
- volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
- ulong start;
- int i;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((volatile FLASH_WORD_SIZE *) dest) &
- (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
- return (2);
- }
-
- for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
- int flag;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
-
- dest2[i] = data2[i];
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
- (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
-
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- }
-
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/bubinga405ep/init.S b/board/bubinga405ep/init.S
deleted file mode 100644
index e478525..0000000
--- a/board/bubinga405ep/init.S
+++ /dev/null
@@ -1,55 +0,0 @@
-/*------------------------------------------------------------------------------+ */
-/* */
-/* This source code has been made available to you by IBM on an AS-IS */
-/* basis. Anyone receiving this source is licensed under IBM */
-/* copyrights to use it in any way he or she deems fit, including */
-/* copying it, modifying it, compiling it, and redistributing it either */
-/* with or without modifications. No license under IBM patents or */
-/* patent applications is to be implied by the copyright license. */
-/* */
-/* Any user of this software should understand that IBM cannot provide */
-/* technical support for this software and will not be responsible for */
-/* any consequences resulting from the use of this software. */
-/* */
-/* Any person who transfers this source code or any derivative work */
-/* must include the IBM copyright notice, this paragraph, and the */
-/* preceding two paragraphs in the transferred software. */
-/* */
-/* COPYRIGHT I B M CORPORATION 1995 */
-/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */
-/*------------------------------------------------------------------------------- */
-
-/*----------------------------------------------------------------------------- */
-/* Function: ext_bus_cntlr_init */
-/* Description: Initializes the External Bus Controller for the external */
-/* peripherals. IMPORTANT: For pass1 this code must run from */
-/* cache since you can not reliably change a peripheral banks */
-/* timing register (pbxap) while running code from that bank. */
-/* For ex., since we are running from ROM on bank 0, we can NOT */
-/* execute the code that modifies bank 0 timings from ROM, so */
-/* we run it from cache. */
-/* Bank 0 - Flash and SRAM */
-/* Bank 1 - NVRAM/RTC */
-/* Bank 2 - Keyboard/Mouse controller */
-/* Bank 3 - IR controller */
-/* Bank 4 - not used */
-/* Bank 5 - not used */
-/* Bank 6 - not used */
-/* Bank 7 - FPGA registers */
-/*----------------------------------------------------------------------------- */
-#include <ppc4xx.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-
-/*----------------------------------------------------------------------------- */
-/* Function: sdram_init */
-/* Description: Dummy implementation here - done in C later */
-/*----------------------------------------------------------------------------- */
- .globl sdram_init
-sdram_init:
- blr
diff --git a/board/bubinga405ep/u-boot.lds.debug b/board/bubinga405ep/u-boot.lds.debug
deleted file mode 100644
index df50b7d..0000000
--- a/board/bubinga405ep/u-boot.lds.debug
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
-/*
- cpu/ppc4xx/start.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/vsprintf.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
-*/
- cpu/ppc4xx/start.o (.text)
- board/bubinga405ep/init.o (.text)
- cpu/ppc4xx/kgdb.o (.text)
- cpu/ppc4xx/traps.o (.text)
- cpu/ppc4xx/interrupts.o (.text)
- cpu/ppc4xx/serial.o (.text)
- cpu/ppc4xx/cpu_init.o (.text)
- cpu/ppc4xx/speed.o (.text)
- cpu/ppc4xx/405gp_enet.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
-
-
- common/environment.o(.text)
-
- *(.text)
- *(.fixup)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = . ;
- PROVIDE (end = .);
-}
diff --git a/board/ebony/ebony.h b/board/ebony/ebony.h
deleted file mode 100644
index 73d489e..0000000
--- a/board/ebony/ebony.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/****************************************************************************
- * FLASH Memory Map as used by TQ Monitor:
- *
- * Start Address Length
- * +-----------------------+ 0x4000_0000 Start of Flash -----------------
- * | MON8xx code | 0x4000_0100 Reset Vector
- * +-----------------------+ 0x400?_????
- * | (unused) |
- * +-----------------------+ 0x4001_FF00
- * | Ethernet Addresses | 0x78
- * +-----------------------+ 0x4001_FF78
- * | (Reserved for MON8xx) | 0x44
- * +-----------------------+ 0x4001_FFBC
- * | Lock Address | 0x04
- * +-----------------------+ 0x4001_FFC0 ^
- * | Hardware Information | 0x40 | MON8xx
- * +=======================+ 0x4002_0000 (sector border) -----------------
- * | Autostart Header | | Applications
- * | ... | v
- *
- *****************************************************************************/
diff --git a/board/ebony/flash.c b/board/ebony/flash.c
deleted file mode 100644
index d8b4757..0000000
--- a/board/ebony/flash.c
+++ /dev/null
@@ -1,743 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
- * Add support for Am29F016D and dynamic switch setting.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Modified 4/5/2001
- * Wait for completion of each sector erase command issued
- * 4/5/2001
- * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-
-
-#undef DEBUG
-#ifdef DEBUG
-#define DEBUGF(x...) printf(x)
-#else
-#define DEBUGF(x...)
-#endif /* DEBUG */
-
-#define BOOT_SMALL_FLASH 32 /* 00100000 */
-#define FLASH_ONBD_N 2 /* 00000010 */
-#define FLASH_SRAM_SEL 1 /* 00000001 */
-
-#define BOOT_SMALL_FLASH_VAL 4
-#define FLASH_ONBD_N_VAL 2
-#define FLASH_SRAM_SEL_VAL 1
-
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
- {0xffc00000, 0xffe00000, 0xff880000}, /* 0:000: configuraton 3 */
- {0xffc00000, 0xffe00000, 0xff800000}, /* 1:001: configuraton 4 */
- {0xffc00000, 0xffe00000, 0x00000000}, /* 2:010: configuraton 7 */
- {0xffc00000, 0xffe00000, 0x00000000}, /* 3:011: configuraton 8 */
- {0xff800000, 0xffa00000, 0xfff80000}, /* 4:100: configuraton 1 */
- {0xff800000, 0xffa00000, 0xfff00000}, /* 5:101: configuraton 2 */
- {0xffc00000, 0xffe00000, 0x00000000}, /* 6:110: configuraton 5 */
- {0xffc00000, 0xffe00000, 0x00000000} /* 7:111: configuraton 6 */
-};
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-#if 0
-static void flash_get_offsets (ulong base, flash_info_t *info);
-#endif
-
-#ifdef CONFIG_ADCIOP
-#define ADDR0 0x0aa9
-#define ADDR1 0x0556
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-#ifdef CONFIG_CPCI405
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned short
-#endif
-
-#ifdef CONFIG_WALNUT405
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-#ifdef CONFIG_EBONY
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void) {
- unsigned long total_b = 0;
- unsigned long size_b[CFG_MAX_FLASH_BANKS];
- unsigned char * fpga_base = (unsigned char *)CFG_FPGA_BASE;
- unsigned char switch_status;
- unsigned short index = 0;
- int i;
-
-
- /* read FPGA base register FPGA_REG0 */
- switch_status = *fpga_base;
-
- /* check the bitmap of switch status */
- if (switch_status & BOOT_SMALL_FLASH) {
- index += BOOT_SMALL_FLASH_VAL;
- }
- if (switch_status & FLASH_ONBD_N) {
- index += FLASH_ONBD_N_VAL;
- }
- if (switch_status & FLASH_SRAM_SEL) {
- index += FLASH_SRAM_SEL_VAL;
- }
-
- DEBUGF("\n");
- DEBUGF("FLASH: Index: %d\n", index);
-
- /* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- flash_info[i].sector_count = -1;
- flash_info[i].size = 0;
-
- /* check whether the address is 0 */
- if (flash_addr_table[index][i] == 0) {
- continue;
- }
-
- /* call flash_get_size() to initialize sector address */
- size_b[i] = flash_get_size(
- (vu_long *)flash_addr_table[index][i], &flash_info[i]);
- flash_info[i].size = size_b[i];
- if (flash_info[i].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
- i, size_b[i], size_b[i]<<20);
- flash_info[i].sector_count = -1;
- flash_info[i].size = 0;
- }
-
- total_b += flash_info[i].size;
- }
-
- return total_b;
-}
-
-
-/*-----------------------------------------------------------------------
- */
-#if 0
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- /* set up sector start address table */
- if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
- (info->flash_id == FLASH_AM040) ||
- (info->flash_id == FLASH_AMD016)) {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- } else {
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
- }
-}
-#endif /* 0 */
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
- int k;
- int size;
- int erased;
- volatile unsigned long *flash;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_SST: printf ("SST "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AMD016: printf ("AM29F016D (16 Mbit, uniform sector size)\n");
- break;
- case FLASH_AM040: printf ("AM29F040 (512 Kbit, uniform sector size)\n");
- break;
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- case FLASH_SST800A: printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
- break;
- case FLASH_SST160A: printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld KB in %d Sectors\n",
- info->size >> 10, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- /*
- * Check if whole sector is erased
- */
- if (i != (info->sector_count-1))
- size = info->start[i+1] - info->start[i];
- else
- size = info->start[0] + info->size - info->start[i];
- erased = 1;
- flash = (volatile unsigned long *)info->start[i];
- size = size >> 2; /* divide by 4 for longword access */
- for (k=0; k<size; k++)
- {
- if (*flash++ != 0xffffffff)
- {
- erased = 0;
- break;
- }
- }
-
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s%s",
- info->start[i],
- erased ? " E" : " ",
- info->protect[i] ? "RO " : " "
- );
- }
- printf ("\n");
- return;
- }
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
- static ulong flash_get_size (vu_long *addr, flash_info_t *info)
- {
- short i;
- FLASH_WORD_SIZE value;
- ulong base = (ulong)addr;
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
-
- DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr );
-
- /* Write auto select command: read Manufacturer ID */
- udelay(10000);
- addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- udelay(1000);
- addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- udelay(1000);
- addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
- udelay(1000);
-
-#ifdef CONFIG_ADCIOP
- value = addr2[2];
-#else
- value = addr2[0];
-#endif
-
- DEBUGF("FLASH MANUFACT: %x\n", value);
-
- switch (value) {
- case (FLASH_WORD_SIZE)AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case (FLASH_WORD_SIZE)FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case (FLASH_WORD_SIZE)SST_MANUFACT:
- info->flash_id = FLASH_MAN_SST;
- break;
- case (FLASH_WORD_SIZE)STM_MANUFACT:
- info->flash_id = FLASH_MAN_STM;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
-#ifdef CONFIG_ADCIOP
- value = addr2[0]; /* device ID */
- debug ("\ndev_code=%x\n", value);
-#else
- value = addr2[1]; /* device ID */
-#endif
-
- DEBUGF("\nFLASH DEVICEID: %x\n", value);
-
- switch (value) {
- case (FLASH_WORD_SIZE)AMD_ID_F016D:
- info->flash_id += FLASH_AMD016;
- info->sector_count = 32;
- info->size = 0x00200000;
- break; /* => 2 MB */
- case (FLASH_WORD_SIZE)STM_ID_F040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
- break;
- case (FLASH_WORD_SIZE)AMD_ID_F040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
- break;
- case (FLASH_WORD_SIZE)AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-#if 0 /* enable when device IDs are available */
- case (FLASH_WORD_SIZE)AMD_ID_LV320T:
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV320B:
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#endif
- case (FLASH_WORD_SIZE)SST_ID_xF800A:
- info->flash_id += FLASH_SST800A;
- info->sector_count = 16;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE)SST_ID_xF160A:
- info->flash_id += FLASH_SST160A;
- info->sector_count = 32;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- /* set up sector start address table */
- if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
- (info->flash_id == FLASH_AM040) ||
- (info->flash_id == FLASH_AMD016)) {
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- } else {
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
-#ifdef CONFIG_ADCIOP
- addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
- info->protect[i] = addr2[4] & 1;
-#else
- addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
- info->protect[i] = 0;
- else
- info->protect[i] = addr2[2] & 1;
-#endif
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
-#if 0 /* test-only */
-#ifdef CONFIG_ADCIOP
- addr2 = (volatile unsigned char *)info->start[0];
- addr2[ADDR0] = 0xAA;
- addr2[ADDR1] = 0x55;
- addr2[ADDR0] = 0xF0; /* reset bank */
-#else
- addr2 = (FLASH_WORD_SIZE *)info->start[0];
- *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
-#endif
-#else /* test-only */
- addr2 = (FLASH_WORD_SIZE *)info->start[0];
- *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
-#endif /* test-only */
- }
-
- return (info->size);
- }
-
- int wait_for_DQ7(flash_info_t *info, int sect)
- {
- ulong start, now, last;
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
-
- start = get_timer (0);
- last = start;
- while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return -1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
- return 0;
- }
-
-/*-----------------------------------------------------------------------
- */
-
- int flash_erase (flash_info_t *info, int s_first, int s_last)
- {
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
- volatile FLASH_WORD_SIZE *addr2;
- int flag, prot, sect, l_sect;
- int i;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("Can't erase unknown flash type - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
- printf("Erasing sector %p\n", addr2);
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr2[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */
- for (i=0; i<50; i++)
- udelay(1000); /* wait 1 ms */
- } else {
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr2[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */
- }
- l_sect = sect;
- /*
- * Wait for each sector to complete, it's more
- * reliable. According to AMD Spec, you must
- * issue all erase commands within a specified
- * timeout. This has been seen to fail, especially
- * if printf()s are included (for debug)!!
- */
- wait_for_DQ7(info, sect);
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
-#if 0
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
- wait_for_DQ7(info, l_sect);
-
- DONE:
-#endif
- /* reset to read mode */
- addr = (FLASH_WORD_SIZE *)info->start[0];
- addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
- }
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
- int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
- {
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
- }
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
- static int write_word (flash_info_t * info, ulong dest, ulong data)
- {
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
- volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
- volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
- ulong start;
- int i;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((volatile FLASH_WORD_SIZE *) dest) &
- (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
- return (2);
- }
-
- for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
- int flag;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
-
- dest2[i] = data2[i];
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
- (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
-
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- }
-
- return (0);
- }
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/ebony/u-boot.lds.debug b/board/ebony/u-boot.lds.debug
deleted file mode 100644
index af497b1..0000000
--- a/board/ebony/u-boot.lds.debug
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- ppc/vsprintf.o (.text)
- ppc/crc32.o (.text)
- ppc/extable.o (.text)
-
- common/environment.o(.text)
-
- *(.text)
- *(.fixup)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = . ;
- PROVIDE (end = .);
-}
diff --git a/board/ocotea/u-boot.lds.debug b/board/ocotea/u-boot.lds.debug
deleted file mode 100644
index 41534de..0000000
--- a/board/ocotea/u-boot.lds.debug
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * (C) Copyright 2002-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- cpu/ppc4xx/start.o (.text)
- board/ocotea/init.o (.text)
- cpu/ppc4xx/kgdb.o (.text)
- cpu/ppc4xx/traps.o (.text)
- cpu/ppc4xx/interrupts.o (.text)
- cpu/ppc4xx/serial.o (.text)
- cpu/ppc4xx/cpu_init.o (.text)
- cpu/ppc4xx/speed.o (.text)
- cpu/ppc4xx/440gx_enet.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
- lib_generic/zlib.o (.text)
-
-/* common/environment.o(.text) */
-
- *(.text)
- *(.fixup)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- *(.rodata.str1.4)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(256);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(256);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = . ;
- PROVIDE (end = .);
-}
diff --git a/board/walnut405/flash.c b/board/walnut405/flash.c
deleted file mode 100644
index 462c09e..0000000
--- a/board/walnut405/flash.c
+++ /dev/null
@@ -1,729 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Modified 4/5/2001
- * Wait for completion of each sector erase command issued
- * 4/5/2001
- * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-#ifdef CONFIG_ADCIOP
-#define ADDR0 0x0aa9
-#define ADDR1 0x0556
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-#ifdef CONFIG_CPCI405
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned short
-#endif
-
-#ifdef CONFIG_WALNUT405
-#define ADDR0 0x5555
-#define ADDR1 0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- unsigned long size_b0, size_b1;
- int i;
- uint pbcr;
- unsigned long base_b0, base_b1;
-
- /* Init: no FLASHes known */
- for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0<<20);
- }
-
- /* Only one bank */
- if (CFG_MAX_FLASH_BANKS == 1)
- {
- /* Setup offsets */
- flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
-
- /* Monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET,
- FLASH_BASE0_PRELIM,
- FLASH_BASE0_PRELIM+monitor_flash_len-1,
- &flash_info[0]);
- size_b1 = 0 ;
- flash_info[0].size = size_b0;
- }
-
- /* 2 banks */
- else
- {
- size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
-
- /* Re-do sizing to get full correct info */
-
- if (size_b1)
- {
- mtdcr(ebccfga, pb0cr);
- pbcr = mfdcr(ebccfgd);
- mtdcr(ebccfga, pb0cr);
- base_b1 = -size_b1;
- pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1/1024/1024)-1)<<17);
- mtdcr(ebccfgd, pbcr);
- /* printf("pb1cr = %x\n", pbcr); */
- }
-
- if (size_b0)
- {
- mtdcr(ebccfga, pb1cr);
- pbcr = mfdcr(ebccfgd);
- mtdcr(ebccfga, pb1cr);
- base_b0 = base_b1 - size_b0;
- pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
- mtdcr(ebccfgd, pbcr);
- /* printf("pb0cr = %x\n", pbcr); */
- }
-
- size_b0 = flash_get_size((vu_long *)base_b0, &flash_info[0]);
-
- flash_get_offsets (base_b0, &flash_info[0]);
-
- /* monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET,
- base_b0+size_b0-monitor_flash_len,
- base_b0+size_b0-1,
- &flash_info[0]);
-
- if (size_b1) {
- /* Re-do sizing to get full correct info */
- size_b1 = flash_get_size((vu_long *)base_b1, &flash_info[1]);
-
- flash_get_offsets (base_b1, &flash_info[1]);
-
- /* monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET,
- base_b1+size_b1-monitor_flash_len,
- base_b1+size_b1-1,
- &flash_info[1]);
- /* monitor protection OFF by default (one is enough) */
- (void)flash_protect(FLAG_PROTECT_CLEAR,
- base_b0+size_b0-monitor_flash_len,
- base_b0+size_b0-1,
- &flash_info[0]);
- } else {
- flash_info[1].flash_id = FLASH_UNKNOWN;
- flash_info[1].sector_count = -1;
- }
-
- flash_info[0].size = size_b0;
- flash_info[1].size = size_b1;
- }/* else 2 banks */
- return (size_b0 + size_b1);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- /* set up sector start address table */
- if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
- (info->flash_id == FLASH_AM040)){
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- } else {
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t *info)
-{
- int i;
- int k;
- int size;
- int erased;
- volatile unsigned long *flash;
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_SST: printf ("SST "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM040: printf ("AM29F040 (512 Kbit, uniform sector size)\n");
- break;
- case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM400T: printf ("AM29LV400T (4 Mbit, top boot sector)\n");
- break;
- case FLASH_AM800B: printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM800T: printf ("AM29LV800T (8 Mbit, top boot sector)\n");
- break;
- case FLASH_AM160B: printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
- break;
- case FLASH_AM320B: printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
- break;
- case FLASH_AM320T: printf ("AM29LV320T (32 Mbit, top boot sector)\n");
- break;
- case FLASH_SST800A: printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
- break;
- case FLASH_SST160A: printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
- break;
- default: printf ("Unknown Chip Type\n");
- break;
- }
-
- printf (" Size: %ld KB in %d Sectors\n",
- info->size >> 10, info->sector_count);
-
- printf (" Sector Start Addresses:");
- for (i=0; i<info->sector_count; ++i) {
- /*
- * Check if whole sector is erased
- */
- if (i != (info->sector_count-1))
- size = info->start[i+1] - info->start[i];
- else
- size = info->start[0] + info->size - info->start[i];
- erased = 1;
- flash = (volatile unsigned long *)info->start[i];
- size = size >> 2; /* divide by 4 for longword access */
- for (k=0; k<size; k++)
- {
- if (*flash++ != 0xffffffff)
- {
- erased = 0;
- break;
- }
- }
-
- if ((i % 5) == 0)
- printf ("\n ");
-#if 0 /* test-only */
- printf (" %08lX%s",
- info->start[i],
- info->protect[i] ? " (RO)" : " "
-#else
- printf (" %08lX%s%s",
- info->start[i],
- erased ? " E" : " ",
- info->protect[i] ? "RO " : " "
-#endif
- );
- }
- printf ("\n");
- return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
- short i;
- FLASH_WORD_SIZE value;
- ulong base = (ulong)addr;
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
-
- /* Write auto select command: read Manufacturer ID */
- addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
-
-#ifdef CONFIG_ADCIOP
- value = addr2[2];
-#else
- value = addr2[0];
-#endif
-
- switch (value) {
- case (FLASH_WORD_SIZE)AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
- case (FLASH_WORD_SIZE)FUJ_MANUFACT:
- info->flash_id = FLASH_MAN_FUJ;
- break;
- case (FLASH_WORD_SIZE)SST_MANUFACT:
- info->flash_id = FLASH_MAN_SST;
- break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* no or unknown flash */
- }
-
-#ifdef CONFIG_ADCIOP
- value = addr2[0]; /* device ID */
- /* printf("\ndev_code=%x\n", value); */
-#else
- value = addr2[1]; /* device ID */
-#endif
-
- switch (value) {
- case (FLASH_WORD_SIZE)AMD_ID_F040B:
- info->flash_id += FLASH_AM040;
- info->sector_count = 8;
- info->size = 0x0080000; /* => 512 ko */
- break;
- case (FLASH_WORD_SIZE)AMD_ID_LV400T:
- info->flash_id += FLASH_AM400T;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV400B:
- info->flash_id += FLASH_AM400B;
- info->sector_count = 11;
- info->size = 0x00080000;
- break; /* => 0.5 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV800T:
- info->flash_id += FLASH_AM800T;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV800B:
- info->flash_id += FLASH_AM800B;
- info->sector_count = 19;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV160T:
- info->flash_id += FLASH_AM160T;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV160B:
- info->flash_id += FLASH_AM160B;
- info->sector_count = 35;
- info->size = 0x00200000;
- break; /* => 2 MB */
-#if 0 /* enable when device IDs are available */
- case (FLASH_WORD_SIZE)AMD_ID_LV320T:
- info->flash_id += FLASH_AM320T;
- info->sector_count = 67;
- info->size = 0x00400000;
- break; /* => 4 MB */
-
- case (FLASH_WORD_SIZE)AMD_ID_LV320B:
- info->flash_id += FLASH_AM320B;
- info->sector_count = 67;
- info->size = 0x00400000;
- break; /* => 4 MB */
-#endif
- case (FLASH_WORD_SIZE)SST_ID_xF800A:
- info->flash_id += FLASH_SST800A;
- info->sector_count = 16;
- info->size = 0x00100000;
- break; /* => 1 MB */
-
- case (FLASH_WORD_SIZE)SST_ID_xF160A:
- info->flash_id += FLASH_SST160A;
- info->sector_count = 32;
- info->size = 0x00200000;
- break; /* => 2 MB */
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- return (0); /* => no or unknown flash */
-
- }
-
- /* set up sector start address table */
- if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
- (info->flash_id == FLASH_AM040)){
- for (i = 0; i < info->sector_count; i++)
- info->start[i] = base + (i * 0x00010000);
- } else {
- if (info->flash_id & FLASH_BTYPE) {
- /* set sector offsets for bottom boot block type */
- info->start[0] = base + 0x00000000;
- info->start[1] = base + 0x00004000;
- info->start[2] = base + 0x00006000;
- info->start[3] = base + 0x00008000;
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + (i * 0x00010000) - 0x00030000;
- }
- } else {
- /* set sector offsets for top boot block type */
- i = info->sector_count - 1;
- info->start[i--] = base + info->size - 0x00004000;
- info->start[i--] = base + info->size - 0x00006000;
- info->start[i--] = base + info->size - 0x00008000;
- for (; i >= 0; i--) {
- info->start[i] = base + i * 0x00010000;
- }
- }
- }
-
- /* check for protected sectors */
- for (i = 0; i < info->sector_count; i++) {
- /* read sector protection at sector address, (A7 .. A0) = 0x02 */
- /* D0 = 1 if protected */
-#ifdef CONFIG_ADCIOP
- addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
- info->protect[i] = addr2[4] & 1;
-#else
- addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
- info->protect[i] = 0;
- else
- info->protect[i] = addr2[2] & 1;
-#endif
- }
-
- /*
- * Prevent writes to uninitialized FLASH.
- */
- if (info->flash_id != FLASH_UNKNOWN) {
-#if 0 /* test-only */
-#ifdef CONFIG_ADCIOP
- addr2 = (volatile unsigned char *)info->start[0];
- addr2[ADDR0] = 0xAA;
- addr2[ADDR1] = 0x55;
- addr2[ADDR0] = 0xF0; /* reset bank */
-#else
- addr2 = (FLASH_WORD_SIZE *)info->start[0];
- *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
-#endif
-#else /* test-only */
- addr2 = (FLASH_WORD_SIZE *)info->start[0];
- *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
-#endif /* test-only */
- }
-
- return (info->size);
-}
-
-int wait_for_DQ7(flash_info_t *info, int sect)
-{
- ulong start, now, last;
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
-
- start = get_timer (0);
- last = start;
- while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
- printf ("Timeout\n");
- return -1;
- }
- /* show that we're waiting */
- if ((now - last) > 1000) { /* every second */
- putc ('.');
- last = now;
- }
- }
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
- volatile FLASH_WORD_SIZE *addr2;
- int flag, prot, sect, l_sect;
- int i;
-
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("Can't erase unknown flash type - aborted\n");
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- l_sect = -1;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
- printf("Erasing sector %p\n", addr2); /* CLH */
-
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr2[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */
- for (i=0; i<50; i++)
- udelay(1000); /* wait 1 ms */
- } else {
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
- addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
- addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
- addr2[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */
- }
- l_sect = sect;
- /*
- * Wait for each sector to complete, it's more
- * reliable. According to AMD Spec, you must
- * issue all erase commands within a specified
- * timeout. This has been seen to fail, especially
- * if printf()s are included (for debug)!!
- */
- wait_for_DQ7(info, sect);
- }
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- /* wait at least 80us - let's wait 1 ms */
- udelay (1000);
-
-#if 0
- /*
- * We wait for the last triggered sector
- */
- if (l_sect < 0)
- goto DONE;
- wait_for_DQ7(info, l_sect);
-
-DONE:
-#endif
- /* reset to read mode */
- addr = (FLASH_WORD_SIZE *)info->start[0];
- addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */
-
- printf (" done\n");
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- ulong cp, wp, data;
- int i, l, rc;
-
- wp = (addr & ~3); /* get lower word aligned address */
-
- /*
- * handle unaligned start bytes
- */
- if ((l = addr - wp) != 0) {
- data = 0;
- for (i=0, cp=wp; i<l; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
- for (; i<4 && cnt>0; ++i) {
- data = (data << 8) | *src++;
- --cnt;
- ++cp;
- }
- for (; cnt==0 && i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- }
-
- /*
- * handle word aligned part
- */
- while (cnt >= 4) {
- data = 0;
- for (i=0; i<4; ++i) {
- data = (data << 8) | *src++;
- }
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- wp += 4;
- cnt -= 4;
- }
-
- if (cnt == 0) {
- return (0);
- }
-
- /*
- * handle unaligned tail bytes
- */
- data = 0;
- for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
- data = (data << 8) | *src++;
- --cnt;
- }
- for (; i<4; ++i, ++cp) {
- data = (data << 8) | (*(uchar *)cp);
- }
-
- return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
- volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
- volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
- volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
- ulong start;
- int i;
-
- /* Check if Flash is (sufficiently) erased */
- if ((*((volatile FLASH_WORD_SIZE *) dest) &
- (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
- return (2);
- }
-
- for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
- int flag;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts ();
-
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
- addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
- addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
-
- dest2[i] = data2[i];
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts ();
-
- /* data polling for D7 */
- start = get_timer (0);
- while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
- (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
-
- if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
- return (1);
- }
- }
- }
-
- return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/walnut405/init.S b/board/walnut405/init.S
deleted file mode 100644
index 70d029a..0000000
--- a/board/walnut405/init.S
+++ /dev/null
@@ -1,99 +0,0 @@
-/*------------------------------------------------------------------------------+ */
-/* */
-/* This source code has been made available to you by IBM on an AS-IS */
-/* basis. Anyone receiving this source is licensed under IBM */
-/* copyrights to use it in any way he or she deems fit, including */
-/* copying it, modifying it, compiling it, and redistributing it either */
-/* with or without modifications. No license under IBM patents or */
-/* patent applications is to be implied by the copyright license. */
-/* */
-/* Any user of this software should understand that IBM cannot provide */
-/* technical support for this software and will not be responsible for */
-/* any consequences resulting from the use of this software. */
-/* */
-/* Any person who transfers this source code or any derivative work */
-/* must include the IBM copyright notice, this paragraph, and the */
-/* preceding two paragraphs in the transferred software. */
-/* */
-/* COPYRIGHT I B M CORPORATION 1995 */
-/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */
-/*------------------------------------------------------------------------------- */
-
-/*----------------------------------------------------------------------------- */
-/* Function: ext_bus_cntlr_init */
-/* Description: Initializes the External Bus Controller for the external */
-/* peripherals. IMPORTANT: For pass1 this code must run from */
-/* cache since you can not reliably change a peripheral banks */
-/* timing register (pbxap) while running code from that bank. */
-/* For ex., since we are running from ROM on bank 0, we can NOT */
-/* execute the code that modifies bank 0 timings from ROM, so */
-/* we run it from cache. */
-/* Bank 0 - Flash and SRAM */
-/* Bank 1 - NVRAM/RTC */
-/* Bank 2 - Keyboard/Mouse controller */
-/* Bank 3 - IR controller */
-/* Bank 4 - not used */
-/* Bank 5 - not used */
-/* Bank 6 - not used */
-/* Bank 7 - FPGA registers */
-/*----------------------------------------------------------------------------- */
-#include <ppc4xx.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-
- .globl ext_bus_cntlr_init
-ext_bus_cntlr_init:
- mflr r4 /* save link register */
- bl ..getAddr
-..getAddr:
- mflr r3 /* get address of ..getAddr */
- mtlr r4 /* restore link register */
- addi r4,0,14 /* set ctr to 10; used to prefetch */
- mtctr r4 /* 10 cache lines to fit this function */
- /* in cache (gives us 8x10=80 instrctns) */
-..ebcloop:
- icbt r0,r3 /* prefetch cache line for addr in r3 */
- addi r3,r3,32 /* move to next cache line */
- bdnz ..ebcloop /* continue for 10 cache lines */
-
- /*------------------------------------------------------------------- */
- /* Delay to ensure all accesses to ROM are complete before changing */
- /* bank 0 timings. 200usec should be enough. */
- /* 200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
- /*------------------------------------------------------------------- */
- addis r3,0,0x0
- ori r3,r3,0xA000 /* ensure 200usec have passed since reset */
- mtctr r3
-..spinlp:
- bdnz ..spinlp /* spin loop */
-
- /*----------------------------------------------------------------------- */
- /* Memory Bank 0 (Flash and SRAM) initialization */
- /*----------------------------------------------------------------------- */
- addi r4,0,pb0ap
- mtdcr ebccfga,r4
- addis r4,0,0x9B01
- ori r4,r4,0x5480
- mtdcr ebccfgd,r4
-
- addi r4,0,pb0cr
- mtdcr ebccfga,r4
- addis r4,0,0xFFF1 /* BAS=0xFFF,BS=0x0(1MB),BU=0x3(R/W), */
- ori r4,r4,0x8000 /* BW=0x0( 8 bits) */
- mtdcr ebccfgd,r4
-
- blr
-
-
-/*----------------------------------------------------------------------------- */
-/* Function: sdram_init */
-/* Description: Dummy implementation here - done in C later */
-/*----------------------------------------------------------------------------- */
- .globl sdram_init
-sdram_init:
- blr
diff --git a/board/walnut405/u-boot.lds.debug b/board/walnut405/u-boot.lds.debug
deleted file mode 100644
index d483424..0000000
--- a/board/walnut405/u-boot.lds.debug
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
- __DYNAMIC = 0; */
-SECTIONS
-{
- /* Read-only sections, merged into text segment: */
- . = + SIZEOF_HEADERS;
- .interp : { *(.interp) }
- .hash : { *(.hash) }
- .dynsym : { *(.dynsym) }
- .dynstr : { *(.dynstr) }
- .rel.text : { *(.rel.text) }
- .rela.text : { *(.rela.text) }
- .rel.data : { *(.rel.data) }
- .rela.data : { *(.rela.data) }
- .rel.rodata : { *(.rel.rodata) }
- .rela.rodata : { *(.rela.rodata) }
- .rel.got : { *(.rel.got) }
- .rela.got : { *(.rela.got) }
- .rel.ctors : { *(.rel.ctors) }
- .rela.ctors : { *(.rela.ctors) }
- .rel.dtors : { *(.rel.dtors) }
- .rela.dtors : { *(.rela.dtors) }
- .rel.bss : { *(.rel.bss) }
- .rela.bss : { *(.rela.bss) }
- .rel.plt : { *(.rel.plt) }
- .rela.plt : { *(.rela.plt) }
- .init : { *(.init) }
- .plt : { *(.plt) }
- .text :
- {
- /* WARNING - the following is hand-optimized to fit within */
- /* the sector layout of our flash chips! XXX FIXME XXX */
-
- mpc8xx/start.o (.text)
- common/dlmalloc.o (.text)
- lib_generic/vsprintf.o (.text)
- lib_generic/crc32.o (.text)
- lib_ppc/extable.o (.text)
-
- common/environment.o(.text)
-
- *(.text)
- *(.fixup)
- *(.got1)
- }
- _etext = .;
- PROVIDE (etext = .);
- .rodata :
- {
- *(.rodata)
- *(.rodata1)
- }
- .fini : { *(.fini) } =0
- .ctors : { *(.ctors) }
- .dtors : { *(.dtors) }
-
- /* Read-write section, merged into data segment: */
- . = (. + 0x0FFF) & 0xFFFFF000;
- _erotext = .;
- PROVIDE (erotext = .);
- .reloc :
- {
- *(.got)
- _GOT2_TABLE_ = .;
- *(.got2)
- _FIXUP_TABLE_ = .;
- *(.fixup)
- }
- __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
- __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
- .data :
- {
- *(.data)
- *(.data1)
- *(.sdata)
- *(.sdata2)
- *(.dynamic)
- CONSTRUCTORS
- }
- _edata = .;
- PROVIDE (edata = .);
-
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
-
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
- . = ALIGN(4096);
- __init_begin = .;
- .text.init : { *(.text.init) }
- .data.init : { *(.data.init) }
- . = ALIGN(4096);
- __init_end = .;
-
- __bss_start = .;
- .bss :
- {
- *(.sbss) *(.scommon)
- *(.dynbss)
- *(.bss)
- *(COMMON)
- }
- _end = . ;
- PROVIDE (end = .);
-}
diff --git a/board/walnut405/walnut405.c b/board/walnut405/walnut405.c
deleted file mode 100644
index 7035599..0000000
--- a/board/walnut405/walnut405.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include "walnut405.h"
-#include <asm/processor.h>
-#include <spd_sdram.h>
-
-int board_early_init_f (void)
-{
- /*-------------------------------------------------------------------------+
- | Interrupt controller setup for the Walnut board.
- | Note: IRQ 0-15 405GP internally generated; active high; level sensitive
- | IRQ 16 405GP internally generated; active low; level sensitive
- | IRQ 17-24 RESERVED
- | IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
- | IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
- | IRQ 27 (EXT IRQ 2) Not Used
- | IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
- | IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
- | IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
- | IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
- | Note for Walnut board:
- | An interrupt taken for the FPGA (IRQ 25) indicates that either
- | the Mouse, Keyboard, IRDA, or External Expansion caused the
- | interrupt. The FPGA must be read to determine which device
- | caused the interrupt. The default setting of the FPGA clears
- |
- +-------------------------------------------------------------------------*/
-
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr (uicer, 0x00000000); /* disable all ints */
- mtdcr (uiccr, 0x00000020); /* set all but FPGA SMI to be non-critical */
- mtdcr (uicpr, 0xFFFFFFE0); /* set int polarities */
- mtdcr (uictr, 0x10000000); /* set int trigger levels */
- mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
-
-#define mtebc(reg, data) mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
- /* BAS=0xF00,BS=0x0(1MB),BU=0x3(R/W),BW=0x0( 8 bits) */
- mtebc (pb1ap, 0x02815480);
- mtebc (pb1cr, 0xF0018000);
-
- /* BAS=0xF01,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
- mtebc (pb2ap, 0x04815A80);
- mtebc (pb2cr, 0xF0118000);
-
- /* BAS=0xF02,BS=0x0(1MB),BU=0x3(R/W),BW=0x0( 8 bits) */
- mtebc (pb3ap, 0x01815280);
- mtebc (pb3cr, 0xF0218000);
-
- /* BAS=0xF03,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
- mtebc (pb7ap, 0x01815280);
- mtebc (pb7cr, 0xF0318000);
-
- /* set UART1 control to select CTS/RTS */
-#define FPGA_BRDC 0xF0300004
- *(volatile char *) (FPGA_BRDC) |= 0x1;
-
- return 0;
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
- unsigned char *s = getenv ("serial#");
- unsigned char *e;
-
- puts ("Board: ");
-
- if (!s || strncmp (s, "WALNUT405", 9)) {
- puts ("### No HW ID - assuming WALNUT405");
- } else {
- for (e = s; *e; ++e) {
- if (*e == ' ')
- break;
- }
- for (; s < e; ++s) {
- putc (*s);
- }
- }
- putc ('\n');
-
- return (0);
-}
-
-
-/* -------------------------------------------------------------------------
- initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
- the necessary info for SDRAM controller configuration
- ------------------------------------------------------------------------- */
-long int initdram (int board_type)
-{
- return spd_sdram (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-int testdram (void)
-{
- /* TODO: XXX XXX XXX */
- printf ("test: xxx MB - ok\n");
-
- return (0);
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/walnut405/walnut405.h b/board/walnut405/walnut405.h
deleted file mode 100644
index 5fc313a..0000000
--- a/board/walnut405/walnut405.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/****************************************************************************
- * FLASH Memory Map as used by TQ Monitor:
- *
- * Start Address Length
- * +-----------------------+ 0x4000_0000 Start of Flash -----------------
- * | MON8xx code | 0x4000_0100 Reset Vector
- * +-----------------------+ 0x400?_????
- * | (unused) |
- * +-----------------------+ 0x4001_FF00
- * | Ethernet Addresses | 0x78
- * +-----------------------+ 0x4001_FF78
- * | (Reserved for MON8xx) | 0x44
- * +-----------------------+ 0x4001_FFBC
- * | Lock Address | 0x04
- * +-----------------------+ 0x4001_FFC0 ^
- * | Hardware Information | 0x40 | MON8xx
- * +=======================+ 0x4002_0000 (sector border) -----------------
- * | Autostart Header | | Applications
- * | ... | v
- *
- *****************************************************************************/