summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/ti/omap2420h4/config.mk4
-rw-r--r--board/ti/omap2420h4/mem.c13
2 files changed, 2 insertions, 15 deletions
diff --git a/board/ti/omap2420h4/config.mk b/board/ti/omap2420h4/config.mk
index ca5ebdf..e5dff69 100644
--- a/board/ti/omap2420h4/config.mk
+++ b/board/ti/omap2420h4/config.mk
@@ -14,7 +14,7 @@
# (mem base + reserved)
# For use with external or internal boots.
-CONFIG_SYS_TEXT_BASE = 0x80e80000
+#CONFIG_SYS_TEXT_BASE = 0x80e80000
# Used with full SRAM boot.
# This is either with a GP system or a signed boot image.
@@ -24,5 +24,5 @@ CONFIG_SYS_TEXT_BASE = 0x80e80000
# Handy to get symbols to debug ROM version.
#CONFIG_SYS_TEXT_BASE = 0x0
-#CONFIG_SYS_TEXT_BASE = 0x08000000
+CONFIG_SYS_TEXT_BASE = 0x08000000
#CONFIG_SYS_TEXT_BASE = 0x04000000
diff --git a/board/ti/omap2420h4/mem.c b/board/ti/omap2420h4/mem.c
index c8b4186..ba3f12a 100644
--- a/board/ti/omap2420h4/mem.c
+++ b/board/ti/omap2420h4/mem.c
@@ -200,19 +200,6 @@ void do_sdrc_init(u32 offset, u32 early)
__asm__ __volatile__("": : :"memory"); /* limit compiler scope */
- /* u-boot is compiled to run in DDR or SRAM at 8xxxxxxx or 4xxxxxxx.
- * If we are running in flash prior to relocation and we use data
- * here which is not pc relative we need to get the address correct.
- * We need to find the current flash mapping to dress up the initial
- * pointer load. As long as this is const data we should be ok.
- */
- if((early) && running_in_flash()){
- sdata = (sdrc_data_t *)(((u32)sdata & 0x0003FFFF) | get_gpmc0_base());
- /* NOR internal boot offset is 0x4000 from xloader signature */
- if(running_from_internal_boot())
- sdata = (sdrc_data_t *)((u32)sdata + 0x4000);
- }
-
if (!early && (((mtype = get_mem_type()) == DDR_COMBO)||(mtype == DDR_STACKED))) {
if(mtype == DDR_COMBO){
pmask = BIT2;/* combo part has a shared CKE signal, can't use feature */