diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/freescale/mpc8313erdb/sdram.c | 10 | ||||
| -rw-r--r-- | board/freescale/mpc8349emds/mpc8349emds.c | 27 | ||||
| -rw-r--r-- | board/freescale/mpc8349itx/mpc8349itx.c | 28 | ||||
| -rw-r--r-- | board/freescale/mpc8360emds/mpc8360emds.c | 69 | ||||
| -rw-r--r-- | board/keymile/common/common.c | 71 | ||||
| -rw-r--r-- | board/keymile/common/common.h | 3 | ||||
| -rw-r--r-- | board/keymile/km83xx/Makefile | 2 | ||||
| -rw-r--r-- | board/keymile/km83xx/km83xx_i2c.c | 88 | ||||
| -rw-r--r-- | board/sbc8349/sbc8349.c | 27 | ||||
| -rw-r--r-- | board/ve8313/ve8313.c | 10 |
10 files changed, 208 insertions, 127 deletions
diff --git a/board/freescale/mpc8313erdb/sdram.c b/board/freescale/mpc8313erdb/sdram.c index 7aede13..a9a2ba4 100644 --- a/board/freescale/mpc8313erdb/sdram.c +++ b/board/freescale/mpc8313erdb/sdram.c @@ -74,8 +74,14 @@ static long fixed_sdram(void) */ __udelay(50000); - im->ddr.csbnds[0].csbnds = (msize - 1) >> 24; - im->ddr.cs_config[0] = CONFIG_SYS_DDR_CONFIG; +#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0) +#warning Chip select bounds is only configurable in 16MB increments +#endif + im->ddr.csbnds[0].csbnds = + ((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | + (((CONFIG_SYS_DDR_SDRAM_BASE + msize - 1) >> CSBNDS_EA_SHIFT) & + CSBNDS_EA); + im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG; /* Currently we use only one CS, so disable the other bank. */ im->ddr.cs_config[1] = 0; diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c index 620540f..ebd5274 100644 --- a/board/freescale/mpc8349emds/mpc8349emds.c +++ b/board/freescale/mpc8349emds/mpc8349emds.c @@ -101,18 +101,10 @@ phys_size_t initdram (int board_type) int fixed_sdram(void) { volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - u32 msize = 0; - u32 ddr_size; - u32 ddr_size_log2; - - msize = CONFIG_SYS_DDR_SIZE; - for (ddr_size = msize << 20, ddr_size_log2 = 0; - (ddr_size > 1); - ddr_size = ddr_size>>1, ddr_size_log2++) { - if (ddr_size & 1) { - return -1; - } - } + u32 msize = CONFIG_SYS_DDR_SIZE; + u32 ddr_size = msize << 20; /* DDR size in bytes */ + u32 ddr_size_log2 = __ilog2(ddr_size); + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); @@ -133,8 +125,15 @@ int fixed_sdram(void) im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL; #else - im->ddr.csbnds[2].csbnds = 0x0000000f; - im->ddr.cs_config[2] = CONFIG_SYS_DDR_CONFIG; + +#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0) +#warning Chip select bounds is only configurable in 16MB increments +#endif + im->ddr.csbnds[2].csbnds = + ((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | + (((CONFIG_SYS_DDR_SDRAM_BASE + ddr_size - 1) >> + CSBNDS_EA_SHIFT) & CSBNDS_EA); + im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG; /* currently we use only one CS, so disable the other banks */ im->ddr.cs_config[0] = 0; diff --git a/board/freescale/mpc8349itx/mpc8349itx.c b/board/freescale/mpc8349itx/mpc8349itx.c index 5647579..9cc808e 100644 --- a/board/freescale/mpc8349itx/mpc8349itx.c +++ b/board/freescale/mpc8349itx/mpc8349itx.c @@ -43,23 +43,27 @@ int fixed_sdram(void) { volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - u32 ddr_size; /* The size of RAM, in bytes */ - u32 ddr_size_log2 = 0; - - for (ddr_size = CONFIG_SYS_DDR_SIZE * 0x100000; ddr_size > 1; ddr_size >>= 1) { - if (ddr_size & 1) { - return -1; - } - ddr_size_log2++; - } + /* The size of RAM, in bytes */ + u32 ddr_size = CONFIG_SYS_DDR_SIZE << 20; + u32 ddr_size_log2 = __ilog2(ddr_size); im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; - /* Only one CS0 for DDR */ - im->ddr.csbnds[0].csbnds = 0x0000000f; - im->ddr.cs_config[0] = CONFIG_SYS_DDR_CONFIG; +#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0) +#warning Chip select bounds is only configurable in 16MB increments +#endif + im->ddr.csbnds[0].csbnds = + ((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | + (((CONFIG_SYS_DDR_SDRAM_BASE + ddr_size - 1) >> + CSBNDS_EA_SHIFT) & CSBNDS_EA); + im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG; + + /* Only one CS for DDR */ + im->ddr.cs_config[1] = 0; + im->ddr.cs_config[2] = 0; + im->ddr.cs_config[3] = 0; debug("cs0_bnds = 0x%08x\n", im->ddr.csbnds[0].csbnds); debug("cs0_config = 0x%08x\n", im->ddr.cs_config[0]); diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c index 51d8035..be76774 100644 --- a/board/freescale/mpc8360emds/mpc8360emds.c +++ b/board/freescale/mpc8360emds/mpc8360emds.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2006,2010 Freescale Semiconductor, Inc. + * Copyright (C) 2006,2010-2011 Freescale Semiconductor, Inc. * Dave Liu <daveliu@freescale.com> * * See file CREDITS for list of people who contributed to this @@ -24,6 +24,7 @@ #include <asm/mmu.h> #include <asm/io.h> #include <asm/fsl_enet.h> +#include <asm/mmu.h> #if defined(CONFIG_OF_LIBFDT) #include <libfdt.h> #endif @@ -139,9 +140,20 @@ int board_early_init_f(void) int board_early_init_r(void) { + gd_t *gd; #ifdef CONFIG_PQ_MDS_PIB pib_init(); #endif + /* + * BAT6 is used for SDRAM when DDR size is 512MB or larger than 256MB + * So re-setup PCI MEM space used BAT5 after relocated to DDR + */ + gd = (gd_t *)(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); + if (gd->ram_size > CONFIG_MAX_MEM_MAPPED) { + write_bat(DBAT5, CONFIG_SYS_DBAT6U, CONFIG_SYS_DBAT6L); + write_bat(IBAT5, CONFIG_SYS_IBAT6U, CONFIG_SYS_IBAT6L); + } + return 0; } @@ -216,19 +228,15 @@ phys_size_t initdram(int board_type) int fixed_sdram(void) { volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - u32 msize = 0; - u32 ddr_size; - u32 ddr_size_log2; - - msize = CONFIG_SYS_DDR_SIZE; - for (ddr_size = msize << 20, ddr_size_log2 = 0; - (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) { - if (ddr_size & 1) { - return -1; - } - } + u32 msize = CONFIG_SYS_DDR_SIZE; + u32 ddr_size = msize << 20; + u32 ddr_size_log2 = __ilog2(ddr_size); + u32 half_ddr_size = ddr_size >> 1; + + im->sysconf.ddrlaw[0].bar = + CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; im->sysconf.ddrlaw[0].ar = - LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); + LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); #if (CONFIG_SYS_DDR_SIZE != 256) #warning Currenly any ddr size other than 256 is not supported #endif @@ -246,11 +254,25 @@ int fixed_sdram(void) im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL; im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL; #else - im->ddr.csbnds[0].csbnds = 0x00000007; - im->ddr.csbnds[1].csbnds = 0x0008000f; - im->ddr.cs_config[0] = CONFIG_SYS_DDR_CONFIG; - im->ddr.cs_config[1] = CONFIG_SYS_DDR_CONFIG; +#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0) +#warning Chip select bounds is only configurable in 16MB increments +#endif + im->ddr.csbnds[0].csbnds = + ((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | + (((CONFIG_SYS_DDR_SDRAM_BASE + half_ddr_size - 1) >> + CSBNDS_EA_SHIFT) & CSBNDS_EA); + im->ddr.csbnds[1].csbnds = + (((CONFIG_SYS_DDR_SDRAM_BASE + half_ddr_size) >> + CSBNDS_SA_SHIFT) & CSBNDS_SA) | + (((CONFIG_SYS_DDR_SDRAM_BASE + ddr_size - 1) >> + CSBNDS_EA_SHIFT) & CSBNDS_EA); + + im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG; + im->ddr.cs_config[1] = CONFIG_SYS_DDR_CS1_CONFIG; + + im->ddr.cs_config[2] = 0; + im->ddr.cs_config[3] = 0; im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; @@ -292,6 +314,19 @@ static int sdram_init(unsigned int base) if (rem) base = base - rem + sdram_size; + /* + * Setup BAT6 for SDRAM when DDR size is 512MB or larger than 256MB + * After relocated to DDR, reuse BAT5 for PCI MEM space + */ + if (base > CONFIG_MAX_MEM_MAPPED) { + unsigned long batl = base | BATL_PP_10 | BATL_MEMCOHERENCE; + unsigned long batu = base | BATU_BL_64M | BATU_VS | BATU_VP; + + /* Setup the BAT6 for SDRAM */ + write_bat(DBAT6, batu, batl); + write_bat(IBAT6, batu, batl); + } + sdram_addr = (uint *)base; /* * Setup SDRAM Base and Option Registers diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c index 612dd2a..f262306 100644 --- a/board/keymile/common/common.c +++ b/board/keymile/common/common.c @@ -39,7 +39,10 @@ #include <i2c.h> #endif +#if !defined(CONFIG_MPC83xx) static void i2c_write_start_seq(void); +#endif + DECLARE_GLOBAL_DATA_PTR; /* @@ -89,9 +92,7 @@ int set_km_env(void) return 0; } -#define DELAY_ABORT_SEQ 62 /* @200kHz 9 clocks = 44us, 62us is ok */ -#define DELAY_HALF_PERIOD (500 / (CONFIG_SYS_I2C_SPEED / 1000)) - +#if defined(CONFIG_SYS_I2C_INIT_BOARD) #if !defined(CONFIG_MPC83xx) static void i2c_write_start_seq(void) { @@ -171,68 +172,6 @@ int i2c_make_abort(void) #endif return ret; } -#endif /* !MPC83xx */ - -#if defined(CONFIG_MPC83xx) -static void i2c_write_start_seq(void) -{ - struct fsl_i2c *dev; - dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET); - udelay(DELAY_ABORT_SEQ); - out_8(&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA)); - udelay(DELAY_ABORT_SEQ); - out_8(&dev->cr, (I2C_CR_MEN)); -} - -int i2c_make_abort(void) -{ - struct fsl_i2c *dev; - dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET); - uchar dummy; - uchar last; - int nbr_read = 0; - int i = 0; - int ret = 0; - - /* wait after each operation to finsh with a delay */ - out_8(&dev->cr, (I2C_CR_MSTA)); - udelay(DELAY_ABORT_SEQ); - out_8(&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA)); - udelay(DELAY_ABORT_SEQ); - dummy = in_8(&dev->dr); - udelay(DELAY_ABORT_SEQ); - last = in_8(&dev->dr); - nbr_read++; - - /* - * do read until the last bit is 1, but stop if the full eeprom is - * read. - */ - while (((last & 0x01) != 0x01) && - (nbr_read < CONFIG_SYS_IVM_EEPROM_MAX_LEN)) { - udelay(DELAY_ABORT_SEQ); - last = in_8(&dev->dr); - nbr_read++; - } - if ((last & 0x01) != 0x01) - ret = -2; - if ((last != 0xff) || (nbr_read > 1)) - printf("[INFO] i2c abort after %d bytes (0x%02x)\n", - nbr_read, last); - udelay(DELAY_ABORT_SEQ); - out_8(&dev->cr, (I2C_CR_MEN)); - udelay(DELAY_ABORT_SEQ); - /* clear status reg */ - out_8(&dev->sr, 0); - - for (i = 0; i < 5; i++) - i2c_write_start_seq(); - if (ret != 0) - printf("[ERROR] i2c abort failed after %d bytes (0x%02x)\n", - nbr_read, last); - - return ret; -} #endif /** @@ -244,6 +183,8 @@ void i2c_init_board(void) /* Now run the AbortSequence() */ i2c_make_abort(); } +#endif + #if !defined(MACH_TYPE_KM_KIRKWOOD) int ethernet_present(void) diff --git a/board/keymile/common/common.h b/board/keymile/common/common.h index 0fb19cf..6c1f640 100644 --- a/board/keymile/common/common.h +++ b/board/keymile/common/common.h @@ -136,6 +136,9 @@ int fdt_get_node_and_value(void *blob, char *propname, void **var); +#define DELAY_ABORT_SEQ 62 /* @200kHz 9 clocks = 44us, 62us is ok */ +#define DELAY_HALF_PERIOD (500 / (CONFIG_SYS_I2C_SPEED / 1000)) + int i2c_soft_read_pin(void); int i2c_make_abort(void); #endif /* __KEYMILE_COMMON_H */ diff --git a/board/keymile/km83xx/Makefile b/board/keymile/km83xx/Makefile index 72945e2..472768a 100644 --- a/board/keymile/km83xx/Makefile +++ b/board/keymile/km83xx/Makefile @@ -28,7 +28,7 @@ endif LIB = $(obj)lib$(BOARD).o -COBJS += $(BOARD).o ../common/common.o ../common/ivm.o +COBJS += $(BOARD).o ../common/common.o ../common/ivm.o $(BOARD)_i2c.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/keymile/km83xx/km83xx_i2c.c b/board/keymile/km83xx/km83xx_i2c.c new file mode 100644 index 0000000..be17775 --- /dev/null +++ b/board/keymile/km83xx/km83xx_i2c.c @@ -0,0 +1,88 @@ +/* + * (C) Copyright 2011 + * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <i2c.h> +#include <asm/io.h> +#include <linux/ctype.h> +#include "../common/common.h" + +static void i2c_write_start_seq(void) +{ + struct fsl_i2c *dev; + dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET); + udelay(DELAY_ABORT_SEQ); + out_8(&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA)); + udelay(DELAY_ABORT_SEQ); + out_8(&dev->cr, (I2C_CR_MEN)); +} + +int i2c_make_abort(void) +{ + struct fsl_i2c *dev; + dev = (struct fsl_i2c *) (CONFIG_SYS_IMMR + CONFIG_SYS_I2C_OFFSET); + uchar dummy; + uchar last; + int nbr_read = 0; + int i = 0; + int ret = 0; + + /* wait after each operation to finsh with a delay */ + out_8(&dev->cr, (I2C_CR_MSTA)); + udelay(DELAY_ABORT_SEQ); + out_8(&dev->cr, (I2C_CR_MEN | I2C_CR_MSTA)); + udelay(DELAY_ABORT_SEQ); + dummy = in_8(&dev->dr); + udelay(DELAY_ABORT_SEQ); + last = in_8(&dev->dr); + nbr_read++; + + /* + * do read until the last bit is 1, but stop if the full eeprom is + * read. + */ + while (((last & 0x01) != 0x01) && + (nbr_read < CONFIG_SYS_IVM_EEPROM_MAX_LEN)) { + udelay(DELAY_ABORT_SEQ); + last = in_8(&dev->dr); + nbr_read++; + } + if ((last & 0x01) != 0x01) + ret = -2; + if ((last != 0xff) || (nbr_read > 1)) + printf("[INFO] i2c abort after %d bytes (0x%02x)\n", + nbr_read, last); + udelay(DELAY_ABORT_SEQ); + out_8(&dev->cr, (I2C_CR_MEN)); + udelay(DELAY_ABORT_SEQ); + /* clear status reg */ + out_8(&dev->sr, 0); + + for (i = 0; i < 5; i++) + i2c_write_start_seq(); + if (ret != 0) + printf("[ERROR] i2c abort failed after %d bytes (0x%02x)\n", + nbr_read, last); + + return ret; +} diff --git a/board/sbc8349/sbc8349.c b/board/sbc8349/sbc8349.c index 50fae7c..42f4c1e 100644 --- a/board/sbc8349/sbc8349.c +++ b/board/sbc8349/sbc8349.c @@ -89,26 +89,25 @@ phys_size_t initdram (int board_type) int fixed_sdram(void) { volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - u32 msize = 0; - u32 ddr_size; - u32 ddr_size_log2; - - msize = CONFIG_SYS_DDR_SIZE; - for (ddr_size = msize << 20, ddr_size_log2 = 0; - (ddr_size > 1); - ddr_size = ddr_size>>1, ddr_size_log2++) { - if (ddr_size & 1) { - return -1; - } - } + u32 msize = CONFIG_SYS_DDR_SIZE; + u32 ddr_size = msize << 20; /* DDR size in bytes */ + u32 ddr_size_log2 = __ilog2(msize); + im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000; im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE); #if (CONFIG_SYS_DDR_SIZE != 256) #warning Currently any ddr size other than 256 is not supported #endif - im->ddr.csbnds[2].csbnds = 0x0000000f; - im->ddr.cs_config[2] = CONFIG_SYS_DDR_CONFIG; + +#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0) +#warning Chip select bounds is only configurable in 16MB increments +#endif + im->ddr.csbnds[2].csbnds = + ((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | + (((CONFIG_SYS_DDR_SDRAM_BASE + ddr_size - 1) >> + CSBNDS_EA_SHIFT) & CSBNDS_EA); + im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG; /* currently we use only one CS, so disable the other banks */ im->ddr.cs_config[0] = 0; diff --git a/board/ve8313/ve8313.c b/board/ve8313/ve8313.c index 166e459..924d871 100644 --- a/board/ve8313/ve8313.c +++ b/board/ve8313/ve8313.c @@ -65,8 +65,14 @@ static long fixed_sdram(void) */ __udelay(50000); - out_be32(&im->ddr.csbnds[0].csbnds, (msize - 1) >> 24); - out_be32(&im->ddr.cs_config[0], CONFIG_SYS_DDR_CONFIG); +#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0) +#warning Chip select bounds is only configurable in 16MB increments +#endif + out_be32(&im->ddr.csbnds[0].csbnds, + ((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) | + (((CONFIG_SYS_DDR_SDRAM_BASE + msize - 1) >> CSBNDS_EA_SHIFT) & + CSBNDS_EA)); + out_be32(&im->ddr.cs_config[0], CONFIG_SYS_DDR_CS0_CONFIG); /* Currently we use only one CS, so disable the other bank. */ out_be32(&im->ddr.cs_config[1], 0); |