diff options
Diffstat (limited to 'board')
-rw-r--r-- | board/freescale/c29xpcie/MAINTAINERS | 2 | ||||
-rw-r--r-- | board/freescale/corenet_ds/MAINTAINERS | 1 | ||||
-rw-r--r-- | board/freescale/t102xqds/ddr.c | 19 | ||||
-rw-r--r-- | board/freescale/t102xqds/t102xqds.c | 23 | ||||
-rw-r--r-- | board/freescale/t102xrdb/cpld.h | 4 | ||||
-rw-r--r-- | board/freescale/t102xrdb/ddr.c | 19 | ||||
-rw-r--r-- | board/freescale/t102xrdb/eth_t102xrdb.c | 30 | ||||
-rw-r--r-- | board/freescale/t102xrdb/spl.c | 7 | ||||
-rw-r--r-- | board/freescale/t102xrdb/t102xrdb.c | 54 | ||||
-rw-r--r-- | board/freescale/t1040qds/ddr.c | 19 | ||||
-rw-r--r-- | board/freescale/t1040qds/eth.c | 93 | ||||
-rw-r--r-- | board/freescale/t1040qds/t1040qds.c | 23 | ||||
-rw-r--r-- | board/freescale/t104xrdb/MAINTAINERS | 1 | ||||
-rw-r--r-- | board/freescale/t104xrdb/eth.c | 59 | ||||
-rw-r--r-- | board/freescale/t4rdb/eth.c | 2 | ||||
-rw-r--r-- | board/freescale/t4rdb/t4_rcw.cfg | 4 |
16 files changed, 315 insertions, 45 deletions
diff --git a/board/freescale/c29xpcie/MAINTAINERS b/board/freescale/c29xpcie/MAINTAINERS index db2e5e3..3308839 100644 --- a/board/freescale/c29xpcie/MAINTAINERS +++ b/board/freescale/c29xpcie/MAINTAINERS @@ -6,3 +6,5 @@ F: include/configs/C29XPCIE.h F: configs/C29XPCIE_defconfig F: configs/C29XPCIE_NAND_defconfig F: configs/C29XPCIE_SPIFLASH_defconfig +F: configs/C29XPCIE_NOR_SECBOOT_defconfig +F: configs/C29XPCIE_SPIFLASH_SECBOOT_defconfig diff --git a/board/freescale/corenet_ds/MAINTAINERS b/board/freescale/corenet_ds/MAINTAINERS index c8ca674..745847c 100644 --- a/board/freescale/corenet_ds/MAINTAINERS +++ b/board/freescale/corenet_ds/MAINTAINERS @@ -27,3 +27,4 @@ F: configs/P5040DS_defconfig F: configs/P5040DS_NAND_defconfig F: configs/P5040DS_SDCARD_defconfig F: configs/P5040DS_SPIFLASH_defconfig +F: configs/P5040DS_SECURE_BOOT_defconfig diff --git a/board/freescale/t102xqds/ddr.c b/board/freescale/t102xqds/ddr.c index 46fc64e..2d4d10f 100644 --- a/board/freescale/t102xqds/ddr.c +++ b/board/freescale/t102xqds/ddr.c @@ -11,6 +11,7 @@ #include <fsl_ddr_sdram.h> #include <fsl_ddr_dimm_params.h> #include <asm/fsl_law.h> +#include <asm/mpc85xx_gpio.h> DECLARE_GLOBAL_DATA_PTR; @@ -152,6 +153,19 @@ found: #endif } +#if defined(CONFIG_DEEP_SLEEP) +void board_mem_sleep_setup(void) +{ + void __iomem *qixis_base = (void *)QIXIS_BASE; + + /* does not provide HW signals for power management */ + clrbits_8(qixis_base + 0x21, 0x2); + /* Disable MCKE isolation */ + gpio_set_value(2, 0); + udelay(1); +} +#endif + phys_size_t initdram(int board_type) { phys_size_t dram_size; @@ -166,5 +180,10 @@ phys_size_t initdram(int board_type) /* DDR has been initialised by first stage boot loader */ dram_size = fsl_ddr_sdram_size(); #endif + +#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD) + fsl_dp_resume(); +#endif + return dram_size; } diff --git a/board/freescale/t102xqds/t102xqds.c b/board/freescale/t102xqds/t102xqds.c index f3141b5..708afca 100644 --- a/board/freescale/t102xqds/t102xqds.c +++ b/board/freescale/t102xqds/t102xqds.c @@ -19,10 +19,10 @@ #include <asm/fsl_liodn.h> #include <fm_eth.h> #include <hwconfig.h> -#include <asm/mpc85xx_gpio.h> #include "../common/qixis.h" #include "t102xqds.h" #include "t102xqds_qixis.h" +#include "../common/sleep.h" DECLARE_GLOBAL_DATA_PTR; @@ -242,6 +242,16 @@ void board_retimer_ds125df111_init(void) i2c_write(I2C_RETIMER_ADDR, 0x64, 1, ®, 1); } +int board_early_init_f(void) +{ +#if defined(CONFIG_DEEP_SLEEP) + if (is_warm_boot()) + fsl_dp_disable_console(); +#endif + + return 0; +} + int board_early_init_r(void) { #ifdef CONFIG_SYS_FLASH_BASE @@ -395,14 +405,3 @@ void qixis_dump_switch(void) printf("SW%d = (0x%02x)\n", i, QIXIS_READ(cms[1])); } } - -#ifdef CONFIG_DEEP_SLEEP -void board_mem_sleep_setup(void) -{ - /* does not provide HW signals for power management */ - QIXIS_WRITE(pwr_ctl[1], (QIXIS_READ(pwr_ctl[1]) & ~0x2)); - /* Disable MCKE isolation */ - gpio_set_value(2, 0); - udelay(1); -} -#endif diff --git a/board/freescale/t102xrdb/cpld.h b/board/freescale/t102xrdb/cpld.h index 5a3100f..db50f81 100644 --- a/board/freescale/t102xrdb/cpld.h +++ b/board/freescale/t102xrdb/cpld.h @@ -43,3 +43,7 @@ void cpld_write(unsigned int reg, u8 value); #define CPLD_LBMAP_RESET 0xFF #define CPLD_LBMAP_SHIFT 0x03 #define CPLD_BOOT_SEL 0x80 + +#define CPLD_PCIE_SGMII_MUX 0x80 +#define CPLD_OVERRIDE_BOOT_EN 0x01 +#define CPLD_OVERRIDE_MUX_EN 0x02 /* PCIE/2.5G-SGMII mux override enable */ diff --git a/board/freescale/t102xrdb/ddr.c b/board/freescale/t102xrdb/ddr.c index a20330b..a2a8f4c 100644 --- a/board/freescale/t102xrdb/ddr.c +++ b/board/freescale/t102xrdb/ddr.c @@ -11,6 +11,7 @@ #include <fsl_ddr_sdram.h> #include <fsl_ddr_dimm_params.h> #include <asm/fsl_law.h> +#include <asm/mpc85xx_gpio.h> DECLARE_GLOBAL_DATA_PTR; @@ -136,6 +137,19 @@ found: #endif } +#if defined(CONFIG_DEEP_SLEEP) +void board_mem_sleep_setup(void) +{ + void __iomem *cpld_base = (void *)CONFIG_SYS_CPLD_BASE; + + /* does not provide HW signals for power management */ + clrbits_8(cpld_base + 0x17, 0x40); + /* Disable MCKE isolation */ + gpio_set_value(2, 0); + udelay(1); +} +#endif + phys_size_t initdram(int board_type) { phys_size_t dram_size; @@ -150,5 +164,10 @@ phys_size_t initdram(int board_type) /* DDR has been initialised by first stage boot loader */ dram_size = fsl_ddr_sdram_size(); #endif + +#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD) + fsl_dp_resume(); +#endif + return dram_size; } diff --git a/board/freescale/t102xrdb/eth_t102xrdb.c b/board/freescale/t102xrdb/eth_t102xrdb.c index 2e400c4..f611ff0 100644 --- a/board/freescale/t102xrdb/eth_t102xrdb.c +++ b/board/freescale/t102xrdb/eth_t102xrdb.c @@ -21,6 +21,7 @@ #include <phy.h> #include <asm/fsl_dtsec.h> #include <asm/fsl_serdes.h> +#include "../common/fman.h" int board_eth_init(bd_t *bis) { @@ -51,15 +52,22 @@ int board_eth_init(bd_t *bis) /* Register the 10G MDIO bus */ fm_memac_mdio_init(bis, &tgec_mdio_info); - /* Set the two on-board RGMII PHY address */ - fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY2_ADDR); + /* Set the on-board RGMII PHY address */ fm_info_set_phy_address(FM1_DTSEC4, RGMII_PHY1_ADDR); switch (srds_s1) { case 0x95: - /* 10G XFI with Aquantia PHY */ + /* set the on-board RGMII2 PHY */ + fm_info_set_phy_address(FM1_DTSEC3, RGMII_PHY2_ADDR); + + /* set 10G XFI with Aquantia AQR105 PHY */ fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR); break; + case 0x77: + case 0x135: + /* set the on-board 2.5G SGMII AQR105 PHY */ + fm_info_set_phy_address(FM1_DTSEC3, SGMII_PHY1_ADDR); + break; default: printf("SerDes protocol 0x%x is not supported on T102xRDB\n", srds_s1); @@ -73,6 +81,10 @@ int board_eth_init(bd_t *bis) dev = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); fm_info_set_mdio(i, dev); break; + case PHY_INTERFACE_MODE_SGMII_2500: + dev = miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME); + fm_info_set_mdio(i, dev); + break; default: break; } @@ -95,6 +107,18 @@ int board_eth_init(bd_t *bis) return pci_eth_init(bis); } +void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, + enum fm_port port, int offset) +{ + if ((fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII_2500) && + (port == FM1_DTSEC3)) { + fdt_set_phy_handle(fdt, compat, addr, "sg_2500_aqr105_phy4"); + fdt_setprop(fdt, offset, "phy-connection-type", + "sgmii-2500", 10); + fdt_status_disabled_by_alias(fdt, "xg_aqr105_phy3"); + } +} + void fdt_fixup_board_enet(void *fdt) { } diff --git a/board/freescale/t102xrdb/spl.c b/board/freescale/t102xrdb/spl.c index dd2dec4..1a3a996 100644 --- a/board/freescale/t102xrdb/spl.c +++ b/board/freescale/t102xrdb/spl.c @@ -11,6 +11,7 @@ #include <mmc.h> #include <fsl_esdhc.h> #include <spi_flash.h> +#include "../common/sleep.h" DECLARE_GLOBAL_DATA_PTR; @@ -42,6 +43,12 @@ void board_init_f(ulong bootflag) console_init_f(); +#ifdef CONFIG_DEEP_SLEEP + /* disable the console if boot from deep sleep */ + if (is_warm_boot()) + fsl_dp_disable_console(); +#endif + /* initialize selected port with appropriate baud rate */ sys_clk = get_board_sys_clk(); plat_ratio = (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f; diff --git a/board/freescale/t102xrdb/t102xrdb.c b/board/freescale/t102xrdb/t102xrdb.c index f5c438d..e196f12 100644 --- a/board/freescale/t102xrdb/t102xrdb.c +++ b/board/freescale/t102xrdb/t102xrdb.c @@ -16,10 +16,10 @@ #include <asm/fsl_serdes.h> #include <asm/fsl_portals.h> #include <asm/fsl_liodn.h> -#include <asm/mpc85xx_gpio.h> #include <fm_eth.h> #include "t102xrdb.h" #include "cpld.h" +#include "../common/sleep.h" DECLARE_GLOBAL_DATA_PTR; @@ -27,6 +27,11 @@ int checkboard(void) { struct cpu_type *cpu = gd->arch.cpu; static const char *freq[3] = {"100.00MHZ", "125.00MHz", "156.25MHZ"}; + ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 srds_s1; + + srds_s1 = in_be32(&gur->rcwsr[4]) & FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + srds_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; printf("Board: %sRDB, ", cpu->name); printf("Board rev: 0x%02x CPLD ver: 0x%02x, boot from ", @@ -50,7 +55,40 @@ int checkboard(void) #endif puts("SERDES Reference Clocks:\n"); - printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[2], freq[0]); + if (srds_s1 == 0x95) + printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[2], freq[0]); + else + printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[0], freq[0]); + + return 0; +} + +static void board_mux_lane(void) +{ + ccsr_gur_t __iomem *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); + u32 srds_prtcl_s1; + u8 reg = CPLD_READ(misc_ctl_status); + + srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) & + FSL_CORENET2_RCWSR4_SRDS1_PRTCL; + srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT; + + if (srds_prtcl_s1 == 0x95) { + /* Route Lane B to PCIE */ + CPLD_WRITE(misc_ctl_status, reg & ~CPLD_PCIE_SGMII_MUX); + } else { + /* Route Lane B to SGMII */ + CPLD_WRITE(misc_ctl_status, reg | CPLD_PCIE_SGMII_MUX); + } + CPLD_WRITE(boot_override, CPLD_OVERRIDE_MUX_EN); +} + +int board_early_init_f(void) +{ +#if defined(CONFIG_DEEP_SLEEP) + if (is_warm_boot()) + fsl_dp_disable_console(); +#endif return 0; } @@ -86,6 +124,7 @@ int board_early_init_r(void) #ifdef CONFIG_SYS_DPAA_QBMAN setup_portals(); #endif + board_mux_lane(); return 0; } @@ -131,14 +170,3 @@ int ft_board_setup(void *blob, bd_t *bd) return 0; } - -#ifdef CONFIG_DEEP_SLEEP -void board_mem_sleep_setup(void) -{ - /* does not provide HW signals for power management */ - CPLD_WRITE(misc_ctl_status, (CPLD_READ(misc_ctl_status) & ~0x40)); - /* Disable MCKE isolation */ - gpio_set_value(2, 0); - udelay(1); -} -#endif diff --git a/board/freescale/t1040qds/ddr.c b/board/freescale/t1040qds/ddr.c index 43f952f..8240240 100644 --- a/board/freescale/t1040qds/ddr.c +++ b/board/freescale/t1040qds/ddr.c @@ -11,6 +11,7 @@ #include <fsl_ddr_sdram.h> #include <fsl_ddr_dimm_params.h> #include <asm/fsl_law.h> +#include <asm/mpc85xx_gpio.h> #include "ddr.h" DECLARE_GLOBAL_DATA_PTR; @@ -100,6 +101,19 @@ found: #endif } +#if defined(CONFIG_DEEP_SLEEP) +void board_mem_sleep_setup(void) +{ + void __iomem *qixis_base = (void *)QIXIS_BASE; + + /* does not provide HW signals for power management */ + clrbits_8(qixis_base + 0x21, 0x2); + /* Disable MCKE isolation */ + gpio_set_value(2, 0); + udelay(1); +} +#endif + phys_size_t initdram(int board_type) { phys_size_t dram_size; @@ -112,5 +126,10 @@ phys_size_t initdram(int board_type) dram_size *= 0x100000; puts(" DDR: "); + +#if defined(CONFIG_DEEP_SLEEP) && !defined(CONFIG_SPL_BUILD) + fsl_dp_resume(); +#endif + return dram_size; } diff --git a/board/freescale/t1040qds/eth.c b/board/freescale/t1040qds/eth.c index 06d9086..8c82934 100644 --- a/board/freescale/t1040qds/eth.c +++ b/board/freescale/t1040qds/eth.c @@ -18,6 +18,7 @@ #include <fsl_mdio.h> #include <malloc.h> #include <asm/fsl_dtsec.h> +#include <vsc9953.h> #include "../common/fman.h" #include "../common/qixis.h" @@ -216,6 +217,7 @@ static void initialize_lane_to_slot(void) lane_to_slot[1] = 7; lane_to_slot[2] = 7; lane_to_slot[3] = 7; + lane_to_slot[6] = 7; lane_to_slot[7] = 7; break; case 0x8d: @@ -438,6 +440,12 @@ int board_eth_init(bd_t *bis) #ifdef CONFIG_FMAN_ENET struct memac_mdio_info memac_mdio_info; unsigned int i; +#ifdef CONFIG_VSC9953 + int lane; + int phy_addr; + phy_interface_t phy_int; + struct mii_dev *bus; +#endif printf("Initializing Fman\n"); set_brdcfg9_for_gtx_clk(); @@ -477,6 +485,7 @@ int board_eth_init(bd_t *bis) for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { switch (fm_info_get_enet_if(i)) { case PHY_INTERFACE_MODE_QSGMII: + fm_info_set_mdio(i, NULL); break; case PHY_INTERFACE_MODE_SGMII: t1040_handle_phy_interface_sgmii(i); @@ -491,6 +500,90 @@ int board_eth_init(bd_t *bis) } } +#ifdef CONFIG_VSC9953 + for (i = 0; i < VSC9953_MAX_PORTS; i++) { + lane = -1; + phy_addr = 0; + phy_int = PHY_INTERFACE_MODE_NONE; + switch (i) { + case 0: + case 1: + case 2: + case 3: + lane = serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_A); + /* PHYs connected over QSGMII */ + if (lane >= 0) { + phy_addr = CONFIG_SYS_FM1_QSGMII21_PHY_ADDR + + i; + phy_int = PHY_INTERFACE_MODE_QSGMII; + break; + } + lane = serdes_get_first_lane(FSL_SRDS_1, + SGMII_SW1_MAC1 + i); + + if (lane < 0) + break; + + /* PHYs connected over QSGMII */ + if (i != 3 || lane_to_slot[lane] == 7) + phy_addr = CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR + + i; + else + phy_addr = CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR; + phy_int = PHY_INTERFACE_MODE_SGMII; + break; + case 4: + case 5: + case 6: + case 7: + lane = serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_B); + /* PHYs connected over QSGMII */ + if (lane >= 0) { + phy_addr = CONFIG_SYS_FM1_QSGMII11_PHY_ADDR + + i - 4; + phy_int = PHY_INTERFACE_MODE_QSGMII; + break; + } + lane = serdes_get_first_lane(FSL_SRDS_1, + SGMII_SW1_MAC1 + i); + /* PHYs connected over SGMII */ + if (lane >= 0) { + phy_addr = CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR + + i - 3; + phy_int = PHY_INTERFACE_MODE_SGMII; + } + break; + case 8: + if (serdes_get_first_lane(FSL_SRDS_1, + SGMII_FM1_DTSEC1) < 0) + /* FM1@DTSEC1 is connected to SW1@PORT8 */ + vsc9953_port_enable(i); + break; + case 9: + if (serdes_get_first_lane(FSL_SRDS_1, + SGMII_FM1_DTSEC2) < 0) { + /* Enable L2 On MAC2 using SCFG */ + struct ccsr_scfg *scfg = (struct ccsr_scfg *) + CONFIG_SYS_MPC85xx_SCFG; + + out_be32(&scfg->esgmiiselcr, + in_be32(&scfg->esgmiiselcr) | + (0x80000000)); + vsc9953_port_enable(i); + } + break; + } + + if (lane >= 0) { + bus = mii_dev_for_muxval(lane_to_slot[lane]); + vsc9953_port_info_set_mdio(i, bus); + vsc9953_port_enable(i); + } + vsc9953_port_info_set_phy_address(i, phy_addr); + vsc9953_port_info_set_phy_int(i, phy_int); + } + +#endif cpu_eth_init(bis); #endif diff --git a/board/freescale/t1040qds/t1040qds.c b/board/freescale/t1040qds/t1040qds.c index 13285be..eaca57f 100644 --- a/board/freescale/t1040qds/t1040qds.c +++ b/board/freescale/t1040qds/t1040qds.c @@ -19,8 +19,8 @@ #include <asm/fsl_liodn.h> #include <fm_eth.h> #include <hwconfig.h> -#include <asm/mpc85xx_gpio.h> +#include "../common/sleep.h" #include "../common/qixis.h" #include "t1040qds.h" #include "t1040qds_qixis.h" @@ -115,6 +115,16 @@ static void qe_board_setup(void) } } +int board_early_init_f(void) +{ +#if defined(CONFIG_DEEP_SLEEP) + if (is_warm_boot()) + fsl_dp_disable_console(); +#endif + + return 0; +} + int board_early_init_r(void) { #ifdef CONFIG_SYS_FLASH_BASE @@ -281,14 +291,3 @@ int board_need_mem_reset(void) { return 1; } - -#ifdef CONFIG_DEEP_SLEEP -void board_mem_sleep_setup(void) -{ - /* does not provide HW signals for power management */ - QIXIS_WRITE(pwr_ctl[1], (QIXIS_READ(pwr_ctl[1]) & ~0x2)); - /* Disable MCKE isolation */ - gpio_set_value(2, 0); - udelay(1); -} -#endif diff --git a/board/freescale/t104xrdb/MAINTAINERS b/board/freescale/t104xrdb/MAINTAINERS index b61e1c0..13d9be9 100644 --- a/board/freescale/t104xrdb/MAINTAINERS +++ b/board/freescale/t104xrdb/MAINTAINERS @@ -21,3 +21,4 @@ T1040RDB_SECURE_BOOT BOARD M: Aneesh Bansal <aneesh.bansal@freescale.com> S: Maintained F: configs/T1040RDB_SECURE_BOOT_defconfig +F: configs/T1042RDB_SECURE_BOOT_defconfig diff --git a/board/freescale/t104xrdb/eth.c b/board/freescale/t104xrdb/eth.c index c8b6c67..7581a4cd 100644 --- a/board/freescale/t104xrdb/eth.c +++ b/board/freescale/t104xrdb/eth.c @@ -6,11 +6,13 @@ #include <common.h> #include <netdev.h> +#include <asm/fsl_serdes.h> #include <asm/immap_85xx.h> #include <fm_eth.h> #include <fsl_mdio.h> #include <malloc.h> #include <asm/fsl_dtsec.h> +#include <vsc9953.h> #include "../common/fman.h" @@ -20,6 +22,11 @@ int board_eth_init(bd_t *bis) struct memac_mdio_info memac_mdio_info; unsigned int i; int phy_addr = 0; +#ifdef CONFIG_VSC9953 + phy_interface_t phy_int; + struct mii_dev *bus; +#endif + printf("Initializing Fman\n"); memac_mdio_info.regs = @@ -72,10 +79,58 @@ int board_eth_init(bd_t *bis) fm_info_set_phy_address(i, 0); break; } - fm_info_set_mdio(i, - miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME)); + if (fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_QSGMII || + fm_info_get_enet_if(i) == PHY_INTERFACE_MODE_NONE) + fm_info_set_mdio(i, NULL); + else + fm_info_set_mdio(i, + miiphy_get_dev_by_name( + DEFAULT_FM_MDIO_NAME)); + } + +#ifdef CONFIG_VSC9953 + /* SerDes configured for QSGMII */ + if (serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_A) >= 0) { + for (i = 0; i < 4; i++) { + bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); + phy_addr = CONFIG_SYS_FM1_QSGMII11_PHY_ADDR + i; + phy_int = PHY_INTERFACE_MODE_QSGMII; + + vsc9953_port_info_set_mdio(i, bus); + vsc9953_port_info_set_phy_address(i, phy_addr); + vsc9953_port_info_set_phy_int(i, phy_int); + vsc9953_port_enable(i); + } + } + if (serdes_get_first_lane(FSL_SRDS_1, QSGMII_SW1_B) >= 0) { + for (i = 4; i < 8; i++) { + bus = miiphy_get_dev_by_name(DEFAULT_FM_MDIO_NAME); + phy_addr = CONFIG_SYS_FM1_QSGMII21_PHY_ADDR + i - 4; + phy_int = PHY_INTERFACE_MODE_QSGMII; + + vsc9953_port_info_set_mdio(i, bus); + vsc9953_port_info_set_phy_address(i, phy_addr); + vsc9953_port_info_set_phy_int(i, phy_int); + vsc9953_port_enable(i); + } } + /* Connect DTSEC1 to L2 switch if it doesn't have a PHY */ + if (serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC1) < 0) + vsc9953_port_enable(8); + + /* Connect DTSEC2 to L2 switch if it doesn't have a PHY */ + if (serdes_get_first_lane(FSL_SRDS_1, SGMII_FM1_DTSEC2) < 0) { + /* Enable L2 On MAC2 using SCFG */ + struct ccsr_scfg *scfg = (struct ccsr_scfg *) + CONFIG_SYS_MPC85xx_SCFG; + + out_be32(&scfg->esgmiiselcr, in_be32(&scfg->esgmiiselcr) | + (0x80000000)); + vsc9953_port_enable(9); + } +#endif + cpu_eth_init(bis); #endif diff --git a/board/freescale/t4rdb/eth.c b/board/freescale/t4rdb/eth.c index 142c6a8..879bd1a 100644 --- a/board/freescale/t4rdb/eth.c +++ b/board/freescale/t4rdb/eth.c @@ -101,7 +101,7 @@ int board_eth_init(bd_t *bis) } #if (CONFIG_SYS_NUM_FMAN == 2) - if (srds_prtcl_s2 == 56) { + if ((srds_prtcl_s2 == 56) || (srds_prtcl_s2 == 55)) { /* SGMII && XFI */ fm_info_set_phy_address(FM2_DTSEC1, SGMII_PHY_ADDR5); fm_info_set_phy_address(FM2_DTSEC2, SGMII_PHY_ADDR6); diff --git a/board/freescale/t4rdb/t4_rcw.cfg b/board/freescale/t4rdb/t4_rcw.cfg index fdbbe5e..e46c7b2 100644 --- a/board/freescale/t4rdb/t4_rcw.cfg +++ b/board/freescale/t4rdb/t4_rcw.cfg @@ -1,7 +1,7 @@ #PBL preamble and RCW header aa55aa55 010e0100 -#serdes protocol 27_56_1_9 +#serdes protocol 27_55_1_9 16070019 18101916 00000000 00000000 -6c700848 00448c00 6c020000 f5000000 +6c6e0848 00448c00 6c020000 f5000000 00000000 ee0000ee 00000000 000287fc 00000000 50000000 00000000 00000028 |