8 files changed, 10 insertions, 83 deletions
diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c
index 0a04994..7af1f41 100644
--- a/board/cm_t35/cm_t35.c
+++ b/board/cm_t35/cm_t35.c
@@ -356,16 +356,17 @@ static void reset_net_chip(void)
 {
 	/* Set GPIO1 of TPS65930 as output */
 	twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
-			     TWL4030_BASEADD_GPIO+0x03);
+				TWL4030_BASEADD_GPIO + 0x03);
 	/* Send a pulse on the GPIO pin */
 	twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
-			     TWL4030_BASEADD_GPIO+0x0C);
+				TWL4030_BASEADD_GPIO + 0x0C);
 	udelay(1);
 	twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
-			     TWL4030_BASEADD_GPIO+0x09);
-	udelay(1);
+				TWL4030_BASEADD_GPIO + 0x09);
+	mdelay(40);
 	twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, 0x02,
-			     TWL4030_BASEADD_GPIO+0x0C);
+				TWL4030_BASEADD_GPIO + 0x0C);
+	mdelay(1);
 }
 #else
 static inline void reset_net_chip(void) {}
diff --git a/board/freescale/mx31pdk/mx31pdk.c b/board/freescale/mx31pdk/mx31pdk.c
index 1d7b4f6..9f8bc53 100644
--- a/board/freescale/mx31pdk/mx31pdk.c
+++ b/board/freescale/mx31pdk/mx31pdk.c
@@ -71,19 +71,11 @@ int board_early_init_f(void)
 	return 0;
 }
 
-void enable_caches(void)
-{
-	icache_enable();
-	dcache_enable();
-}
-
 int board_init(void)
 {
 	/* adress of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
 
-	enable_caches();
-
 	return 0;
 }
 
diff --git a/board/freescale/mx35pdk/mx35pdk.c b/board/freescale/mx35pdk/mx35pdk.c
index cce7123..bc415b8 100644
--- a/board/freescale/mx35pdk/mx35pdk.c
+++ b/board/freescale/mx35pdk/mx35pdk.c
@@ -258,17 +258,6 @@ int board_late_init(void)
 	val |= 0x80;
 	mc9sdz60_reg_write(MC9SDZ60_REG_RESET_1, val);
 
-	return 0;
-}
-
-int checkboard(void)
-{
-	/*
-	 * Be sure that I2C is initialized to check
-	 * the board revision
-	 */
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-
 	/* Print board revision */
 	printf("Board: MX35 PDK %d.0\n", ((get_board_rev() >> 8) + 1) & 0x0F);
 
diff --git a/board/freescale/mx53ard/imximage_dd3.cfg b/board/freescale/mx53ard/imximage_dd3.cfg
index 50e05af..614d29e 100644
--- a/board/freescale/mx53ard/imximage_dd3.cfg
+++ b/board/freescale/mx53ard/imximage_dd3.cfg
@@ -91,6 +91,6 @@ DATA 4 0x63fd901c 0x00028039
 DATA 4 0x63fd901c 0x05208138
 DATA 4 0x63fd901c 0x04008048
 DATA 4 0x63fd9020 0x00005800
-DATA 4 0x63fd9040 0x04b80003
+DATA 4 0x63fd9040 0x05380003
 DATA 4 0x63fd9058 0x00022227
 DATA 4 0x63fd901C 0x00000000
diff --git a/board/freescale/mx53evk/imximage.cfg b/board/freescale/mx53evk/imximage.cfg
index dd7528c..915fb2c 100644
--- a/board/freescale/mx53evk/imximage.cfg
+++ b/board/freescale/mx53evk/imximage.cfg
@@ -108,5 +108,5 @@ DATA 4 0x63fd901c 0x00448039
 DATA 4 0x63fd9020 0x00005800
 DATA 4 0x63fd9058 0x00033335
 DATA 4 0x63fd901c 0x00000000
-DATA 4 0x63fd9040 0x04b80003
+DATA 4 0x63fd9040 0x05380003
 DATA 4 0x53fa8004 0x00194005
diff --git a/board/freescale/mx53loco/imximage.cfg b/board/freescale/mx53loco/imximage.cfg
index f30258e..2ce5f8d 100644
--- a/board/freescale/mx53loco/imximage.cfg
+++ b/board/freescale/mx53loco/imximage.cfg
@@ -91,6 +91,6 @@ DATA 4 0x63fd901c 0x00028039
 DATA 4 0x63fd901c 0x05208138
 DATA 4 0x63fd901c 0x04008048
 DATA 4 0x63fd9020 0x00005800
-DATA 4 0x63fd9040 0x04b80003
+DATA 4 0x63fd9040 0x05380003
 DATA 4 0x63fd9058 0x00022227
 DATA 4 0x63fd901c 0x00000000
diff --git a/board/freescale/mx53smd/imximage.cfg b/board/freescale/mx53smd/imximage.cfg
index 50e05af..614d29e 100644
--- a/board/freescale/mx53smd/imximage.cfg
+++ b/board/freescale/mx53smd/imximage.cfg
@@ -91,6 +91,6 @@ DATA 4 0x63fd901c 0x00028039
 DATA 4 0x63fd901c 0x05208138
 DATA 4 0x63fd901c 0x04008048
 DATA 4 0x63fd9020 0x00005800
-DATA 4 0x63fd9040 0x04b80003
+DATA 4 0x63fd9040 0x05380003
 DATA 4 0x63fd9058 0x00022227
 DATA 4 0x63fd901C 0x00000000
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index 8b07eef..e26b387 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -507,58 +507,3 @@ int ehci_hcd_stop(void)
 }
 
 #endif /* CONFIG_USB_EHCI */
-
-#ifndef CONFIG_SPL_BUILD
-/*
- * This command returns the status of the user button on beagle xM
- * Input - none
- * Returns - 	1 if button is held down
- *		0 if button is not held down
- */
-int do_userbutton(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-	int     button = 0;
-	int	gpio;
-
-	/*
-	 * pass address parameter as argv[0] (aka command name),
-	 * and all remaining args
-	 */
-	switch (get_board_revision()) {
-	case REVISION_AXBX:
-	case REVISION_CX:
-	case REVISION_C4:
-		gpio = 7;
-		break;
-	case REVISION_XM_A:
-	case REVISION_XM_B:
-	case REVISION_XM_C:
-	default:
-		gpio = 4;
-		break;
-	}
-	gpio_request(gpio, "");
-	gpio_direction_input(gpio);
-	printf("The user button is currently ");
-	if (gpio_get_value(gpio))
-	{
-		button = 1;
-		printf("PRESSED.\n");
-	}
-	else
-	{
-		button = 0;
-		printf("NOT pressed.\n");
-	}
-
-	return !button;
-}
-
-/* -------------------------------------------------------------------- */
-
-U_BOOT_CMD(
-	userbutton, CONFIG_SYS_MAXARGS, 1,	do_userbutton,
-	"Return the status of the BeagleBoard USER button",
-	""
-);
-#endif