summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/manroland/hmi1001/Kconfig12
-rw-r--r--board/manroland/hmi1001/MAINTAINERS6
-rw-r--r--board/manroland/hmi1001/Makefile8
-rw-r--r--board/manroland/hmi1001/hmi1001.c301
-rw-r--r--board/manroland/mucmc52/Kconfig12
-rw-r--r--board/manroland/mucmc52/MAINTAINERS6
-rw-r--r--board/manroland/mucmc52/Makefile11
-rw-r--r--board/manroland/mucmc52/mucmc52.c394
-rw-r--r--board/manroland/uc100/Kconfig12
-rw-r--r--board/manroland/uc100/MAINTAINERS6
-rw-r--r--board/manroland/uc100/Makefile8
-rw-r--r--board/manroland/uc100/pcmcia.c192
-rw-r--r--board/manroland/uc100/uc100.c254
-rw-r--r--board/manroland/uc101/Kconfig12
-rw-r--r--board/manroland/uc101/MAINTAINERS6
-rw-r--r--board/manroland/uc101/Makefile8
-rw-r--r--board/manroland/uc101/uc101.c367
17 files changed, 0 insertions, 1615 deletions
diff --git a/board/manroland/hmi1001/Kconfig b/board/manroland/hmi1001/Kconfig
deleted file mode 100644
index 996a87f..0000000
--- a/board/manroland/hmi1001/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_HMI1001
-
-config SYS_BOARD
- default "hmi1001"
-
-config SYS_VENDOR
- default "manroland"
-
-config SYS_CONFIG_NAME
- default "hmi1001"
-
-endif
diff --git a/board/manroland/hmi1001/MAINTAINERS b/board/manroland/hmi1001/MAINTAINERS
deleted file mode 100644
index a66a981..0000000
--- a/board/manroland/hmi1001/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-HMI1001 BOARD
-#M: -
-S: Maintained
-F: board/manroland/hmi1001/
-F: include/configs/hmi1001.h
-F: configs/hmi1001_defconfig
diff --git a/board/manroland/hmi1001/Makefile b/board/manroland/hmi1001/Makefile
deleted file mode 100644
index c29a665..0000000
--- a/board/manroland/hmi1001/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := hmi1001.o
diff --git a/board/manroland/hmi1001/hmi1001.c b/board/manroland/hmi1001/hmi1001.c
deleted file mode 100644
index 64bdd8f..0000000
--- a/board/manroland/hmi1001/hmi1001.c
+++ /dev/null
@@ -1,301 +0,0 @@
-/*
- * (C) Copyright 2003-2008
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * (C) Copyright 2004
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-#include <asm/processor.h>
-#include <malloc.h>
-
-#ifndef CONFIG_SYS_RAMBOOT
-static void sdram_start (int hi_addr)
-{
- long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
- /* unlock mode register */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
- __asm__ volatile ("sync");
-
- /* precharge all banks */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
- __asm__ volatile ("sync");
-
-#if SDRAM_DDR
- /* set mode register: extended mode */
- *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
- __asm__ volatile ("sync");
-
- /* set mode register: reset DLL */
- *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
- __asm__ volatile ("sync");
-#endif
-
- /* precharge all banks */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
- __asm__ volatile ("sync");
-
- /* auto refresh */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
- __asm__ volatile ("sync");
-
- /* set mode register */
- *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
- __asm__ volatile ("sync");
-
- /* normal operation */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
- __asm__ volatile ("sync");
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
- * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
- * is something else than 0x00000000.
- */
-
-phys_size_t initdram (int board_type)
-{
- ulong dramsize = 0;
-#ifndef CONFIG_SYS_RAMBOOT
- ulong test1, test2;
- uint svr, pvr;
-
- /* setup SDRAM chip selects */
- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001c; /* 512MB at 0x0 */
- *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x40000000; /* disabled */
- __asm__ volatile ("sync");
-
- /* setup config registers */
- *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
- *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
- __asm__ volatile ("sync");
-
-#if SDRAM_DDR
- /* set tap delay */
- *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
- __asm__ volatile ("sync");
-#endif
-
- /* find RAM size using SDRAM CS0 only */
- sdram_start(0);
- test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
- sdram_start(1);
- test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
- if (test1 > test2) {
- sdram_start(0);
- dramsize = test1;
- } else {
- dramsize = test2;
- }
-
- /* memory smaller than 1MB is impossible */
- if (dramsize < (1 << 20)) {
- dramsize = 0;
- }
-
- /* set SDRAM CS0 size according to the amount of RAM found */
- if (dramsize > 0) {
- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 +
- __builtin_ffs(dramsize >> 20) - 1;
- } else {
- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
- }
-
- *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
-#else /* CONFIG_SYS_RAMBOOT */
-
- /* retrieve size of memory connected to SDRAM CS0 */
- dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
- if (dramsize >= 0x13) {
- dramsize = (1 << (dramsize - 0x13)) << 20;
- } else {
- dramsize = 0;
- }
-
- /* retrieve size of memory connected to SDRAM CS1 */
- dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
- if (dramsize2 >= 0x13) {
- dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
- } else {
- dramsize2 = 0;
- }
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
- /*
- * On MPC5200B we need to set the special configuration delay in the
- * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
- * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
- *
- * "The SDelay should be written to a value of 0x00000004. It is
- * required to account for changes caused by normal wafer processing
- * parameters."
- */
- svr = get_svr();
- pvr = get_pvr();
- if ((SVR_MJREV(svr) >= 2) &&
- (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
-
- *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
- __asm__ volatile ("sync");
- }
-
-/* return dramsize + dramsize2; */
- return dramsize;
-}
-
-int checkboard (void)
-{
- puts ("Board: HMI1001\n");
- return 0;
-}
-
-#ifdef CONFIG_PREBOOT
-
-static uchar kbd_magic_prefix[] = "key_magic";
-static uchar kbd_command_prefix[] = "key_cmd";
-
-#define S1_ROT 0xf0
-#define S2_Q 0x40
-#define S2_M 0x20
-
-struct kbd_data_t {
- char s1;
- char s2;
-};
-
-struct kbd_data_t* get_keys (struct kbd_data_t *kbd_data)
-{
- kbd_data->s1 = *((volatile uchar*)(CONFIG_SYS_STATUS1_BASE));
- kbd_data->s2 = *((volatile uchar*)(CONFIG_SYS_STATUS2_BASE));
-
- return kbd_data;
-}
-
-static int compare_magic (const struct kbd_data_t *kbd_data, char *str)
-{
- char s1 = str[0];
- char s2;
-
- if (s1 >= '0' && s1 <= '9')
- s1 -= '0';
- else if (s1 >= 'a' && s1 <= 'f')
- s1 = s1 - 'a' + 10;
- else if (s1 >= 'A' && s1 <= 'F')
- s1 = s1 - 'A' + 10;
- else
- return -1;
-
- if (((S1_ROT & kbd_data->s1) >> 4) != s1)
- return -1;
-
- s2 = (S2_Q | S2_M) & kbd_data->s2;
-
- switch (str[1]) {
- case 'q':
- case 'Q':
- if (s2 == S2_Q)
- return -1;
- break;
- case 'm':
- case 'M':
- if (s2 == S2_M)
- return -1;
- break;
- case '\0':
- if (s2 == (S2_Q | S2_M))
- return 0;
- default:
- return -1;
- }
-
- if (str[2])
- return -1;
-
- return 0;
-}
-
-static char *key_match (const struct kbd_data_t *kbd_data)
-{
- char magic[sizeof (kbd_magic_prefix) + 1];
- char *suffix;
- char *kbd_magic_keys;
-
- /*
- * The following string defines the characters that can be appended
- * to "key_magic" to form the names of environment variables that
- * hold "magic" key codes, i. e. such key codes that can cause
- * pre-boot actions. If the string is empty (""), then only
- * "key_magic" is checked (old behaviour); the string "125" causes
- * checks for "key_magic1", "key_magic2" and "key_magic5", etc.
- */
- if ((kbd_magic_keys = getenv ("magic_keys")) == NULL)
- kbd_magic_keys = "";
-
- /* loop over all magic keys;
- * use '\0' suffix in case of empty string
- */
- for (suffix = kbd_magic_keys; *suffix ||
- suffix == kbd_magic_keys; ++suffix) {
- sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
-
- if (compare_magic(kbd_data, getenv(magic)) == 0) {
- char cmd_name[sizeof (kbd_command_prefix) + 1];
- char *cmd;
-
- sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
- cmd = getenv (cmd_name);
-
- return (cmd);
- }
- }
-
- return (NULL);
-}
-
-#endif /* CONFIG_PREBOOT */
-
-int misc_init_r (void)
-{
-#ifdef CONFIG_PREBOOT
- struct kbd_data_t kbd_data;
- /* Decode keys */
- char *str = strdup (key_match (get_keys (&kbd_data)));
- /* Set or delete definition */
- setenv ("preboot", str);
- free (str);
-#endif /* CONFIG_PREBOOT */
-
- return 0;
-}
-
-int board_early_init_r (void)
-{
- *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
- *(vu_long *)MPC5XXX_BOOTCS_START =
- *(vu_long *)MPC5XXX_CS0_START = START_REG(CONFIG_SYS_FLASH_BASE);
- *(vu_long *)MPC5XXX_BOOTCS_STOP =
- *(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE);
- return 0;
-}
-#ifdef CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
- pci_mpc5xxx_init(&hose);
-}
-#endif
diff --git a/board/manroland/mucmc52/Kconfig b/board/manroland/mucmc52/Kconfig
deleted file mode 100644
index a033610..0000000
--- a/board/manroland/mucmc52/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_MUCMC52
-
-config SYS_BOARD
- default "mucmc52"
-
-config SYS_VENDOR
- default "manroland"
-
-config SYS_CONFIG_NAME
- default "mucmc52"
-
-endif
diff --git a/board/manroland/mucmc52/MAINTAINERS b/board/manroland/mucmc52/MAINTAINERS
deleted file mode 100644
index 45a2764..0000000
--- a/board/manroland/mucmc52/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MUCMC52 BOARD
-M: Heiko Schocher <hs@denx.de>
-S: Maintained
-F: board/manroland/mucmc52/
-F: include/configs/mucmc52.h
-F: configs/mucmc52_defconfig
diff --git a/board/manroland/mucmc52/Makefile b/board/manroland/mucmc52/Makefile
deleted file mode 100644
index 927fc32..0000000
--- a/board/manroland/mucmc52/Makefile
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# (C) Copyright 2008
-# Heiko Schocher, DENX Software Engineering, hs@denx.de.
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := mucmc52.o
diff --git a/board/manroland/mucmc52/mucmc52.c b/board/manroland/mucmc52/mucmc52.c
deleted file mode 100644
index c8ed5b7..0000000
--- a/board/manroland/mucmc52/mucmc52.c
+++ /dev/null
@@ -1,394 +0,0 @@
-/*
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * (C) Copyright 2004
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
- *
- * (C) Copyright 2008
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <fdt_support.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-#include <malloc.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-
-#ifndef CONFIG_SYS_RAMBOOT
-static void sdram_start (int hi_addr)
-{
- long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
- /* unlock mode register */
- out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CTRL,
- (SDRAM_CONTROL | 0x80000000 | hi_addr_bit));
- __asm__ volatile ("sync");
-
- /* precharge all banks */
- out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CTRL,
- (SDRAM_CONTROL | 0x80000002 | hi_addr_bit));
- __asm__ volatile ("sync");
-
-#if SDRAM_DDR
- /* set mode register: extended mode */
- out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_MODE, (SDRAM_EMODE));
- __asm__ volatile ("sync");
-
- /* set mode register: reset DLL */
- out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_MODE,
- (SDRAM_MODE | 0x04000000));
- __asm__ volatile ("sync");
-#endif
-
- /* precharge all banks */
- out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CTRL,
- (SDRAM_CONTROL | 0x80000002 | hi_addr_bit));
- __asm__ volatile ("sync");
-
- /* auto refresh */
- out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CTRL,
- (SDRAM_CONTROL | 0x80000004 | hi_addr_bit));
- __asm__ volatile ("sync");
-
- /* set mode register */
- out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_MODE, (SDRAM_MODE));
- __asm__ volatile ("sync");
-
- /* normal operation */
- out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CTRL,
- (SDRAM_CONTROL | hi_addr_bit));
- __asm__ volatile ("sync");
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
- * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
- * is something else than 0x00000000.
- */
-
-phys_size_t initdram (int board_type)
-{
- ulong dramsize = 0;
- ulong dramsize2 = 0;
- uint svr, pvr;
-
-#ifndef CONFIG_SYS_RAMBOOT
- ulong test1, test2;
-
- /* setup SDRAM chip selects */
- out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CS0CFG, 0x0000001c); /* 512MB at 0x0 */
- out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CS1CFG, 0x80000000);/* disabled */
- __asm__ volatile ("sync");
-
- /* setup config registers */
- out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CONFIG1, SDRAM_CONFIG1);
- out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CONFIG2, SDRAM_CONFIG2);
- __asm__ volatile ("sync");
-
-#if SDRAM_DDR
- /* set tap delay */
- out_be32 ((unsigned __iomem *)MPC5XXX_CDM_PORCFG, SDRAM_TAPDELAY);
- __asm__ volatile ("sync");
-#endif
-
- /* find RAM size using SDRAM CS0 only */
- sdram_start (0);
- test1 = get_ram_size ((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
- sdram_start(1);
- test2 = get_ram_size ((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
- if (test1 > test2) {
- sdram_start (0);
- dramsize = test1;
- } else {
- dramsize = test2;
- }
-
- /* memory smaller than 1MB is impossible */
- if (dramsize < (1 << 20)) {
- dramsize = 0;
- }
-
- /* set SDRAM CS0 size according to the amount of RAM found */
- if (dramsize > 0) {
- out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CS0CFG,
- (0x13 + __builtin_ffs(dramsize >> 20) - 1));
- } else {
- out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CS0CFG, 0); /* disabled */
- }
-
- /* let SDRAM CS1 start right after CS0 */
- out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CS1CFG, (dramsize + 0x0000001c));/*512MB*/
-
- /* find RAM size using SDRAM CS1 only */
- if (!dramsize)
- sdram_start (0);
- test2 = test1 = get_ram_size ((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x20000000);
- if (!dramsize) {
- sdram_start (1);
- test2 = get_ram_size ((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x20000000);
- }
- if (test1 > test2) {
- sdram_start (0);
- dramsize2 = test1;
- } else {
- dramsize2 = test2;
- }
-
- /* memory smaller than 1MB is impossible */
- if (dramsize2 < (1 << 20)) {
- dramsize2 = 0;
- }
-
- /* set SDRAM CS1 size according to the amount of RAM found */
- if (dramsize2 > 0) {
- out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CS1CFG,
- (dramsize | (0x13 + __builtin_ffs(dramsize2 >> 20) - 1)));
- } else {
- out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CS1CFG, dramsize); /* disabled */
- }
-
-#else /* CONFIG_SYS_RAMBOOT */
-
- /* retrieve size of memory connected to SDRAM CS0 */
- dramsize = in_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CS0CFG) & 0xFF;
- if (dramsize >= 0x13) {
- dramsize = (1 << (dramsize - 0x13)) << 20;
- } else {
- dramsize = 0;
- }
-
- /* retrieve size of memory connected to SDRAM CS1 */
- dramsize2 = in_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_CS1CFG) & 0xFF;
- if (dramsize2 >= 0x13) {
- dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
- } else {
- dramsize2 = 0;
- }
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
- /*
- * On MPC5200B we need to set the special configuration delay in the
- * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM
- * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190:
- *
- * "The SDelay should be written to a value of 0x00000004. It is
- * required to account for changes caused by normal wafer processing
- * parameters."
- */
- svr = get_svr();
- pvr = get_pvr();
- if ((SVR_MJREV(svr) >= 2) &&
- (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) {
-
- out_be32 ((unsigned __iomem *)MPC5XXX_SDRAM_SDELAY, 0x04);
- __asm__ volatile ("sync");
- }
-
- return dramsize + dramsize2;
-}
-
-int checkboard (void)
-{
- puts ("Board: MUC.MC-52 HW WDT ");
-#if defined(CONFIG_HW_WATCHDOG)
- puts ("enabled\n");
-#else
- puts ("disabled\n");
-#endif
- return 0;
-}
-
-#ifdef CONFIG_PREBOOT
-
-static uchar kbd_magic_prefix[] = "key_magic";
-static uchar kbd_command_prefix[] = "key_cmd";
-
-#define S1_ROT 0xf0
-#define S2_Q 0x40
-#define S2_M 0x20
-
-struct kbd_data_t {
- char s1;
- char s2;
-};
-
-struct kbd_data_t* get_keys (struct kbd_data_t *kbd_data)
-{
- kbd_data->s1 = in_8 ((volatile uchar*)CONFIG_SYS_STATUS1_BASE);
- kbd_data->s2 = in_8 ((volatile uchar*)CONFIG_SYS_STATUS2_BASE);
-
- return kbd_data;
-}
-
-static int compare_magic (const struct kbd_data_t *kbd_data, char *str)
-{
- char s1 = str[0];
- char s2;
-
- if (s1 >= '0' && s1 <= '9')
- s1 -= '0';
- else if (s1 >= 'a' && s1 <= 'f')
- s1 = s1 - 'a' + 10;
- else if (s1 >= 'A' && s1 <= 'F')
- s1 = s1 - 'A' + 10;
- else
- return -1;
-
- if (((S1_ROT & kbd_data->s1) >> 4) != s1)
- return -1;
-
- s2 = (S2_Q | S2_M) & kbd_data->s2;
-
- switch (str[1]) {
- case 'q':
- case 'Q':
- if (s2 == S2_Q)
- return -1;
- break;
- case 'm':
- case 'M':
- if (s2 == S2_M)
- return -1;
- break;
- case '\0':
- if (s2 == (S2_Q | S2_M))
- return 0;
- default:
- return -1;
- }
-
- if (str[2])
- return -1;
-
- return 0;
-}
-
-static char *key_match (const struct kbd_data_t *kbd_data)
-{
- char magic[sizeof (kbd_magic_prefix) + 1];
- char *suffix;
- char *kbd_magic_keys;
-
- /*
- * The following string defines the characters that can be appended
- * to "key_magic" to form the names of environment variables that
- * hold "magic" key codes, i. e. such key codes that can cause
- * pre-boot actions. If the string is empty (""), then only
- * "key_magic" is checked (old behaviour); the string "125" causes
- * checks for "key_magic1", "key_magic2" and "key_magic5", etc.
- */
- if ((kbd_magic_keys = getenv ("magic_keys")) == NULL)
- kbd_magic_keys = "";
-
- /* loop over all magic keys;
- * use '\0' suffix in case of empty string
- */
- for (suffix = kbd_magic_keys; *suffix ||
- suffix == kbd_magic_keys; ++suffix) {
- sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
-
- if (compare_magic(kbd_data, getenv(magic)) == 0) {
- char cmd_name[sizeof (kbd_command_prefix) + 1];
- char *cmd;
-
- sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
- cmd = getenv (cmd_name);
-
- return (cmd);
- }
- }
-
- return (NULL);
-}
-
-#endif /* CONFIG_PREBOOT */
-
-int misc_init_r (void)
-{
-#ifdef CONFIG_PREBOOT
- struct kbd_data_t kbd_data;
- /* Decode keys */
- char *str = strdup (key_match (get_keys (&kbd_data)));
- /* Set or delete definition */
- setenv ("preboot", str);
- free (str);
-#endif /* CONFIG_PREBOOT */
-
- out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x38), ' ');
- out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x39), ' ');
- out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3A), ' ');
- out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3B), ' ');
- out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3C), ' ');
- out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3D), ' ');
- out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3E), ' ');
- out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3F), ' ');
-
- return 0;
-}
-
-int board_early_init_r (void)
-{
- out_be32 ((unsigned __iomem *)MPC5XXX_BOOTCS_CFG, in_be32 ((unsigned __iomem *)MPC5XXX_BOOTCS_CFG) & ~0x1);
- out_be32 ((unsigned __iomem *)MPC5XXX_BOOTCS_START, START_REG(CONFIG_SYS_FLASH_BASE));
- out_be32 ((unsigned __iomem *)MPC5XXX_CS0_START, START_REG(CONFIG_SYS_FLASH_BASE));
- out_be32 ((unsigned __iomem *)MPC5XXX_BOOTCS_STOP,
- STOP_REG(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE));
- out_be32 ((unsigned __iomem *)MPC5XXX_CS0_STOP,
- STOP_REG(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE));
- return 0;
-}
-
-int last_stage_init (void)
-{
- out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x38), 'M');
- out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x39), 'U');
- out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3A), 'C');
- out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3B), '.');
- out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3C), 'M');
- out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3D), 'C');
- out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3E), '5');
- out_8 ((volatile uchar *)(CONFIG_SYS_DISPLAY_BASE + 0x3F), '2');
-
- return 0;
-}
-
-#if defined(CONFIG_HW_WATCHDOG)
-#define GPT_OUT_0 0x00000027
-#define GPT_OUT_1 0x00000037
-void hw_watchdog_reset (void)
-{
- /* Trigger HW Watchdog with TIMER_0 */
- out_be32 ((unsigned __iomem *)MPC5XXX_GPT0_ENABLE, GPT_OUT_1);
- out_be32 ((unsigned __iomem *)MPC5XXX_GPT0_ENABLE, GPT_OUT_0);
-}
-#endif
-
-#ifdef CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init (struct pci_controller *);
-
-void pci_init_board (void)
-{
- pci_mpc5xxx_init (&hose);
-}
-#endif
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, bd_t *bd)
-{
- ft_cpu_setup(blob, bd);
-
- return 0;
-}
-#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
diff --git a/board/manroland/uc100/Kconfig b/board/manroland/uc100/Kconfig
deleted file mode 100644
index 08f681b..0000000
--- a/board/manroland/uc100/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_UC100
-
-config SYS_BOARD
- default "uc100"
-
-config SYS_VENDOR
- default "manroland"
-
-config SYS_CONFIG_NAME
- default "uc100"
-
-endif
diff --git a/board/manroland/uc100/MAINTAINERS b/board/manroland/uc100/MAINTAINERS
deleted file mode 100644
index 260471c..0000000
--- a/board/manroland/uc100/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-UC100 BOARD
-M: Stefan Roese <sr@denx.de>
-S: Maintained
-F: board/manroland/uc100/
-F: include/configs/uc100.h
-F: configs/uc100_defconfig
diff --git a/board/manroland/uc100/Makefile b/board/manroland/uc100/Makefile
deleted file mode 100644
index 8e69c52..0000000
--- a/board/manroland/uc100/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = uc100.o pcmcia.o
diff --git a/board/manroland/uc100/pcmcia.c b/board/manroland/uc100/pcmcia.c
deleted file mode 100644
index db3821a..0000000
--- a/board/manroland/uc100/pcmcia.c
+++ /dev/null
@@ -1,192 +0,0 @@
-#include <common.h>
-#include <mpc8xx.h>
-#include <pcmcia.h>
-
-#undef CONFIG_PCMCIA
-
-#if defined(CONFIG_CMD_PCMCIA)
-#define CONFIG_PCMCIA
-#endif
-
-#if (defined(CONFIG_CMD_IDE)) && defined(CONFIG_IDE_8xx_PCCARD)
-#define CONFIG_PCMCIA
-#endif
-
-#ifdef CONFIG_PCMCIA
-
-#define PCMCIA_BOARD_MSG "UC100"
-
-/*
- * Remark: don't turn off OE "__MY_PCMCIA_GCRX_CXOE" on UC100 board.
- * This leads to board-hangup! (sr, 8 Dez. 2004)
- */
-static void cfg_ports (void)
-{
- volatile immap_t *immap;
-
- immap = (immap_t *)CONFIG_SYS_IMMR;
-
- /*
- * Configure Port A for MAX1602 PC-Card Power-Interface Switch
- */
- immap->im_ioport.iop_padat &= ~0x8000; /* set port x output to low */
- immap->im_ioport.iop_padir |= 0x8000; /* enable port x as output */
-
- debug ("Set Port A: PAR: %08x DIR: %08x DAT: %08x\n",
- immap->im_ioport.iop_papar, immap->im_ioport.iop_padir,
- immap->im_ioport.iop_padat);
-}
-
-int pcmcia_hardware_enable(int slot)
-{
- volatile immap_t *immap;
- volatile pcmconf8xx_t *pcmp;
- volatile sysconf8xx_t *sysp;
- uint reg, mask;
-
- debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
- udelay(10000);
-
- immap = (immap_t *)CONFIG_SYS_IMMR;
- sysp = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf));
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
-
- /* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
- cfg_ports ();
-
- /*
- * Configure SIUMCR to enable PCMCIA port B
- * (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
- */
- sysp->sc_siumcr &= ~SIUMCR_DBGC11; /* set DBGC to 00 */
-
- /* clear interrupt state, and disable interrupts */
- pcmp->pcmc_pscr = PCMCIA_MASK(_slot_);
- pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
-
- /*
- * Disable interrupts, DMA, and PCMCIA buffers
- * (isolate the interface) and assert RESET signal
- */
- debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = 0;
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- PCMCIA_PGCRX(_slot_) = reg;
- udelay(500);
-
- /*
- * Make sure there is a card in the slot, then configure the interface.
- */
- udelay(10000);
- debug ("[%d] %s: PIPR(%p)=0x%x\n",
- __LINE__,__FUNCTION__,
- &(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
- if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
- printf (" No Card found\n");
- return (1);
- }
-
- /*
- * Power On.
- */
- mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
- reg = pcmp->pcmc_pipr;
- debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
- reg,
- (reg&PCMCIA_VS1(slot))?"n":"ff",
- (reg&PCMCIA_VS2(slot))?"n":"ff");
-
- if ((reg & mask) == mask)
- puts (" 5.0V card found: ");
- else
- puts (" 3.3V card found: ");
-
- /* switch VCC on */
- immap->im_ioport.iop_padat |= 0x8000; /* power enable 3.3V */
-
- udelay(10000);
-
- debug ("Enable PCMCIA buffers and stop RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
-
- udelay(250000); /* some cards need >150 ms to come up :-( */
-
- debug ("# hardware_enable done\n");
-
- return (0);
-}
-
-
-#if defined(CONFIG_CMD_PCMCIA)
-int pcmcia_hardware_disable(int slot)
-{
- volatile immap_t *immap;
- volatile cpm8xx_t *cp;
- volatile pcmconf8xx_t *pcmp;
- u_long reg;
-
- debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
- immap = (immap_t *)CONFIG_SYS_IMMR;
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
-
- /* switch VCC off */
- immap->im_ioport.iop_padat &= ~0x8000; /* power disable 3.3V */
-
- /* Configure PCMCIA General Control Register */
- debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = 0;
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- PCMCIA_PGCRX(_slot_) = reg;
-
- udelay(10000);
-
- return (0);
-}
-#endif
-
-
-int pcmcia_voltage_set(int slot, int vcc, int vpp)
-{
- u_long reg;
-
- debug ("voltage_set: "
- PCMCIA_BOARD_MSG
- " Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
- 'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
-
- /*
- * Disable PCMCIA buffers (isolate the interface)
- * and assert RESET signal
- */
- debug ("Disable PCMCIA buffers and assert RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg |= __MY_PCMCIA_GCRX_CXRESET; /* active high */
- PCMCIA_PGCRX(_slot_) = reg;
- udelay(500);
-
- /*
- * Configure Port C pins for
- * 5 Volts Enable and 3 Volts enable,
- * Turn all power pins to Hi-Z
- */
- debug ("PCMCIA power OFF\n");
- cfg_ports (); /* Enables switch, but all in Hi-Z */
-
- debug ("Enable PCMCIA buffers and stop RESET\n");
- reg = PCMCIA_PGCRX(_slot_);
- reg &= ~__MY_PCMCIA_GCRX_CXRESET; /* active high */
- reg &= ~__MY_PCMCIA_GCRX_CXOE; /* active low */
- PCMCIA_PGCRX(_slot_) = reg;
- udelay(500);
-
- debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
- slot+'A');
- return (0);
-}
-
-#endif /* CONFIG_PCMCIA */
diff --git a/board/manroland/uc100/uc100.c b/board/manroland/uc100/uc100.c
deleted file mode 100644
index 31f08dd..0000000
--- a/board/manroland/uc100/uc100.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#if 0
-#define DEBUG
-#endif
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <i2c.h>
-#include <miiphy.h>
-
-int fec8xx_miiphy_write(char *devname, unsigned char addr,
- unsigned char reg, unsigned short value);
-
-/*********************************************************************/
-/* UPMA Pre Initilization Table by WV (Miron MT48LC16M16A2-7E B) */
-/*********************************************************************/
-const uint sdram_init_upm_table[] = {
- /* SDRAM Initialisation Sequence (offset 0 in UPMA RAM) WV */
- /* NOP - Precharge - AutoRefr - NOP - NOP */
- /* NOP - AutoRefr - NOP */
- /* NOP - NOP - LoadModeR - NOP - Active */
- /* Position of Single Read */
- 0x0ffffc04, 0x0ff77c04, 0x0ff5fc04, 0x0ffffc04, 0x0ffffc04,
- 0x0ffffc04, 0x0ff5fc04, 0x0ffffc04,
-
- /* Burst Read. (offset 8 in UPMA RAM) */
- /* Cycle lent for Initialisation WV */
- 0x0ffffc04, 0x0ffffc34, 0x0f057c34, 0x0ffffc30, 0x1ff7fc05,
- 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-
- /* Single Write. (offset 18 in UPMA RAM) */
- 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-
- /* Burst Write. (offset 20 in UPMA RAM) */
- 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-
- /* Refresh (offset 30 in UPMA RAM) */
- 0x0FF77C04, 0x0FFFFC04, 0x0FF5FC84, 0x0FFFFC04, 0x0FFFFC04,
- 0x0FFFFC84, 0x1FFFFC05, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF,
-
- /* Exception. (offset 3c in UPMA RAM) */
- 0x7FFFFC05, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-};
-
-/*********************************************************************/
-/* UPMA initilization table. */
-/*********************************************************************/
-const uint sdram_upm_table[] = {
- /* single read. (offset 0 in UPMA RAM) */
- 0x0F07FC04, 0x0FFFFC04, 0x00BDFC04, 0x0FF77C00, 0x1FFFFC05,
- 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, /* 0x05-0x07 new WV */
-
- /* Burst Read. (offset 8 in UPMA RAM) */
- 0x0F07FC04, 0x0FFFFC04, 0x00BDFC04, 0x00FFFC00, 0x00FFFC00,
- 0x00FFFC00, 0x0FF77C00, 0x1FFFFC05, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-
- /* Single Write. (offset 18 in UPMA RAM) */
- 0x0F07FC04, 0x0FFFFC00, 0x00BD7C04, 0x0FFFFC04, 0x0FF77C04,
- 0x1FFFFC05, 0xFFFFFFFF, 0xFFFFFFFF,
-
- /* Burst Write. (offset 20 in UPMA RAM) */
- 0x0F07FC04, 0x0FFFFC00, 0x00BD7C00, 0x00FFFC00, 0x00FFFC00,
- 0x00FFFC04, 0x0FFFFC04, 0x0FF77C04, 0x1FFFFC05, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-
- /* Refresh (offset 30 in UPMA RAM) */
- 0x0FF77C04, 0x0FFFFC04, 0x0FF5FC84, 0x0FFFFC04, 0x0FFFFC04,
- 0x0FFFFC84, 0x1FFFFC05, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF,
-
- /* Exception. (offset 3c in UPMA RAM) */
- 0x7FFFFC05, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, /* 0x3C new WV */
-};
-
-/*********************************************************************/
-/* UPMB initilization table. */
-/*********************************************************************/
-const uint mpm_upm_table[] = {
- /* single read. (offset 0 in upm RAM) */
- 0x8FF00004, 0x0FF00004, 0x0FF81004, 0x1FF00001,
- 0x1FF00001, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-
- /* burst read. (Offset 8 in upm RAM) */
- 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-
- /* single write. (Offset 0x18 in upm RAM) */
- 0x8FF00004, 0x0FF00004, 0x0FF81004, 0x0FF00004,
- 0x0FF00004, 0x1FF00001, 0xFFFFFFFF, 0xFFFFFFFF,
-
- /* burst write. (Offset 0x20 in upm RAM) */
- 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-
- /* Refresh cycle, offset 0x30 */
- 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
- 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-
- /* Exception, 0ffset 0x3C */
- 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-};
-
-
-int board_switch(void)
-{
- volatile pcmconf8xx_t *pcmp;
-
- pcmp = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
-
- return ((pcmp->pcmc_pipr >> 24) & 0xf);
-}
-
-
-/*
- * Check Board Identity:
- */
-int checkboard (void)
-{
- char str[64];
- int i = getenv_f("serial#", str, sizeof(str));
-
- puts ("Board: ");
-
- if (i == -1) {
- puts ("### No HW ID - assuming UC100");
- } else {
- puts(str);
- }
-
- printf (" (SWITCH=%1X)\n", board_switch());
-
- return 0;
-}
-
-
-/*
- * Initialize SDRAM
- */
-phys_size_t initdram (int board_type)
-{
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
-
- /*---------------------------------------------------------------------*/
- /* Initialize the UPMA/UPMB registers with the appropriate table. */
- /*---------------------------------------------------------------------*/
- upmconfig (UPMA, (uint *) sdram_init_upm_table,
- sizeof (sdram_init_upm_table) / sizeof (uint));
- upmconfig (UPMB, (uint *) mpm_upm_table,
- sizeof (mpm_upm_table) / sizeof (uint));
-
- /*---------------------------------------------------------------------*/
- /* Memory Periodic Timer Prescaler: divide by 16 */
- /*---------------------------------------------------------------------*/
- memctl->memc_mptpr = 0x0200; /* Divide by 32 WV */
-
- memctl->memc_mamr = CONFIG_SYS_MAMR_VAL & 0xFF7FFFFF; /* Bit 8 := "0" Kein Refresh WV */
- memctl->memc_mbmr = CONFIG_SYS_MBMR_VAL;
-
- /*---------------------------------------------------------------------*/
- /* Initialize the Memory Controller registers, MPTPR, Chip Select 1 */
- /* for SDRAM */
- /* */
- /* NOTE: The refresh rate in MAMR reg is set according to the lowest */
- /* clock rate (16.67MHz) to allow proper operation for all ADS */
- /* clock frequencies. */
- /*---------------------------------------------------------------------*/
- memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
- memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
-
- /*-------------------------------------------------------------------*/
- /* Wait at least 200 usec for DRAM to stabilize, this magic number */
- /* obtained from the init code. */
- /*-------------------------------------------------------------------*/
- udelay(200);
-
- memctl->memc_mamr = (memctl->memc_mamr | 0x04) & ~0x08;
-
- memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
- memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
-
- /*---------------------------------------------------------------------*/
- /* run MRS command in location 5-8 of UPMB. */
- /*---------------------------------------------------------------------*/
- memctl->memc_mar = 0x88;
- /* RUN UPMA on CS1 1-time from UPMA addr 0x05 */
-
- memctl->memc_mcr = 0x80002100;
- /* RUN UPMA on CS1 1-time from UPMA addr 0x00 WV */
-
- udelay(200);
-
- /*---------------------------------------------------------------------*/
- /* Initialisation for normal access WV */
- /*---------------------------------------------------------------------*/
-
- /*---------------------------------------------------------------------*/
- /* Initialize the UPMA register with the appropriate table. */
- /*---------------------------------------------------------------------*/
- upmconfig (UPMA, (uint *) sdram_upm_table,
- sizeof (sdram_upm_table) / sizeof (uint));
-
- /*---------------------------------------------------------------------*/
- /* rerstore MBMR value (4-beat refresh burst.) */
- /*---------------------------------------------------------------------*/
- memctl->memc_mamr = CONFIG_SYS_MAMR_VAL | 0x00800000; /* Bit 8 := "1" Refresh Enable WV */
-
- udelay(200);
-
- return (64 * 1024 * 1024); /* fixed setup for 64MBytes! */
-}
-
-
-int misc_init_r (void)
-{
- uchar val;
-
- /*
- * Make sure that RTC has clock output enabled (triggers watchdog!)
- */
- val = i2c_reg_read (CONFIG_SYS_I2C_RTC_ADDR, 0x0D);
- val |= 0x80;
- i2c_reg_write (CONFIG_SYS_I2C_RTC_ADDR, 0x0D, val);
-
- /*
- * Configure PHY to setup LED's correctly and use 100MBit, FD
- */
- mii_init();
-
- /* disable auto-negotiation, 100mbit, full-duplex */
- fec8xx_miiphy_write(NULL, 0, MII_BMCR, 0x2100);
-
- /* set LED's to Link, Transmit, Receive */
- fec8xx_miiphy_write(NULL, 0, MII_NWAYTEST, 0x4122);
-
- return 0;
-}
diff --git a/board/manroland/uc101/Kconfig b/board/manroland/uc101/Kconfig
deleted file mode 100644
index c285b22..0000000
--- a/board/manroland/uc101/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_UC101
-
-config SYS_BOARD
- default "uc101"
-
-config SYS_VENDOR
- default "manroland"
-
-config SYS_CONFIG_NAME
- default "uc101"
-
-endif
diff --git a/board/manroland/uc101/MAINTAINERS b/board/manroland/uc101/MAINTAINERS
deleted file mode 100644
index 0fc7b85..0000000
--- a/board/manroland/uc101/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-UC101 BOARD
-M: Heiko Schocher <hs@denx.de>
-S: Maintained
-F: board/manroland/uc101/
-F: include/configs/uc101.h
-F: configs/uc101_defconfig
diff --git a/board/manroland/uc101/Makefile b/board/manroland/uc101/Makefile
deleted file mode 100644
index 9289d91..0000000
--- a/board/manroland/uc101/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y := uc101.o
diff --git a/board/manroland/uc101/uc101.c b/board/manroland/uc101/uc101.c
deleted file mode 100644
index e794c46..0000000
--- a/board/manroland/uc101/uc101.c
+++ /dev/null
@@ -1,367 +0,0 @@
-/*
- * (C) Copyright 2006
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * (C) Copyright 2003-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004
- * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
- *
- * (C) Copyright 2004
- * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <fdt_support.h>
-#include <mpc5xxx.h>
-#include <pci.h>
-#include <malloc.h>
-
-/* some SIMPLE GPIO Pins */
-#define GPIO_USB_8 (31-12)
-#define GPIO_USB_7 (31-13)
-#define GPIO_USB_6 (31-14)
-#define GPIO_USB_0 (31-15)
-#define GPIO_PSC3_7 (31-18)
-#define GPIO_PSC3_6 (31-19)
-#define GPIO_PSC3_1 (31-22)
-#define GPIO_PSC3_0 (31-23)
-
-/* some simple Interrupt GPIO Pins */
-#define GPIO_PSC3_8 2
-#define GPIO_USB1_9 3
-
-#define GPT_OUT_0 0x00000027
-#define GPT_OUT_1 0x00000037
-#define GPT_DISABLE 0x00000000 /* GPT pin disabled */
-
-#define GP_SIMP_ENABLE_O(n, v) {pgpio->simple_dvo |= (v << n); \
- pgpio->simple_ddr |= (1 << n); \
- pgpio->simple_gpioe |= (1 << n); \
- }
-
-#define GP_SIMP_ENABLE_I(n) { pgpio->simple_ddr |= ~(1 << n); \
- pgpio->simple_gpioe |= (1 << n); \
- }
-
-#define GP_SIMP_SET_O(n, v) (pgpio->simple_dvo = v ? \
- (pgpio->simple_dvo | (1 << n)) : \
- (pgpio->simple_dvo & ~(1 << n)) )
-
-#define GP_SIMP_GET_O(n) ((pgpio->simple_dvo >> n) & 1)
-#define GP_SIMP_GET_I(n) ((pgpio->simple_ival >> n) & 1)
-
-#define GP_SINT_SET_O(n, v) (pgpio->sint_dvo = v ? \
- (pgpio->sint_dvo | (1 << n)) : \
- (pgpio->sint_dvo & ~(1 << n)) )
-
-#define GP_SINT_ENABLE_O(n, v) {pgpio->sint_ode &= ~(1 << n); \
- pgpio->sint_ddr |= (1 << n); \
- GP_SINT_SET_O(n, v); \
- pgpio->sint_gpioe |= (1 << n); \
- }
-
-#define GP_SINT_ENABLE_I(n) { pgpio->sint_ddr |= ~(1 << n); \
- pgpio->sint_gpioe |= (1 << n); \
- }
-
-#define GP_SINT_GET_O(n) ((pgpio->sint_ival >> n) & 1)
-#define GP_SINT_GET_I(n) ((pgpio-ntt_ival >> n) & 1)
-
-#define GP_TIMER_ENABLE_O(n, v) ( \
- ((volatile struct mpc5xxx_gpt *)(MPC5XXX_GPT + n))->emsr = v ? \
- GPT_OUT_1 : \
- GPT_OUT_0 )
-
-#define GP_TIMER_SET_O(n, v) GP_TIMER_ENABLE_O(n, v)
-
-#define GP_TIMER_GET_O(n, v) ( \
- (((volatile struct mpc5xxx_gpt *)(MPC5XXX_GPT + n))->emsr & 0x10) >> 4)
-
-#define GP_TIMER_GET_I(n, v) ( \
- (((volatile struct mpc5xxx_gpt *)(MPC5XXX_GPT + n))->sr & 0x100) >> 8)
-
-#ifndef CONFIG_SYS_RAMBOOT
-static void sdram_start (int hi_addr)
-{
- long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
- /* unlock mode register */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit;
- __asm__ volatile ("sync");
-
- /* precharge all banks */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
- __asm__ volatile ("sync");
-
-#if SDRAM_DDR
- /* set mode register: extended mode */
- *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE;
- __asm__ volatile ("sync");
-
- /* set mode register: reset DLL */
- *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000;
- __asm__ volatile ("sync");
-#endif
-
- /* precharge all banks */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit;
- __asm__ volatile ("sync");
-
- /* auto refresh */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit;
- __asm__ volatile ("sync");
-
- /* set mode register */
- *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
- __asm__ volatile ("sync");
-
- /* normal operation */
- *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
- __asm__ volatile ("sync");
-}
-#endif
-
-/*
- * ATTENTION: Although partially referenced initdram does NOT make real use
- * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE
- * is something else than 0x00000000.
- */
-
-phys_size_t initdram (int board_type)
-{
- ulong dramsize = 0;
-#ifndef CONFIG_SYS_RAMBOOT
- ulong test1, test2;
-
- /* setup SDRAM chip selects */
- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001c; /* 512MB at 0x0 */
- *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x40000000; /* disabled */
- __asm__ volatile ("sync");
-
- /* setup config registers */
- *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
- *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
- __asm__ volatile ("sync");
-
-#if SDRAM_DDR
- /* set tap delay */
- *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY;
- __asm__ volatile ("sync");
-#endif
-
- /* find RAM size using SDRAM CS0 only */
- sdram_start(0);
- test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
- sdram_start(1);
- test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000);
- if (test1 > test2) {
- sdram_start(0);
- dramsize = test1;
- } else {
- dramsize = test2;
- }
-
- /* memory smaller than 1MB is impossible */
- if (dramsize < (1 << 20)) {
- dramsize = 0;
- }
-
- /* set SDRAM CS0 size according to the amount of RAM found */
- if (dramsize > 0) {
- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 +
- __builtin_ffs(dramsize >> 20) - 1;
- } else {
- *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
- }
-
- *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
-#else /* CONFIG_SYS_RAMBOOT */
-
- /* retrieve size of memory connected to SDRAM CS0 */
- dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
- if (dramsize >= 0x13) {
- dramsize = (1 << (dramsize - 0x13)) << 20;
- } else {
- dramsize = 0;
- }
-
- /* retrieve size of memory connected to SDRAM CS1 */
- dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF;
- if (dramsize2 >= 0x13) {
- dramsize2 = (1 << (dramsize2 - 0x13)) << 20;
- } else {
- dramsize2 = 0;
- }
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
-/* return dramsize + dramsize2; */
- return dramsize;
-}
-
-int checkboard (void)
-{
- puts ("Board: MAN UC101\n");
- /* clear the Display */
- *(char *)(CONFIG_SYS_DISP_CWORD) = 0x80;
- return 0;
-}
-
-static void init_ports (void)
-{
- volatile struct mpc5xxx_gpio *pgpio =
- (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
-
- GP_SIMP_ENABLE_I(GPIO_USB_8); /* HEX Bit 3 */
- GP_SIMP_ENABLE_I(GPIO_USB_7); /* HEX Bit 2 */
- GP_SIMP_ENABLE_I(GPIO_USB_6); /* HEX Bit 1 */
- GP_SIMP_ENABLE_I(GPIO_USB_0); /* HEX Bit 0 */
- GP_SIMP_ENABLE_I(GPIO_PSC3_0); /* Switch Menue A */
- GP_SIMP_ENABLE_I(GPIO_PSC3_1); /* Switch Menue B */
- GP_SIMP_ENABLE_I(GPIO_PSC3_6); /* Switch Cold_Warm */
- GP_SIMP_ENABLE_I(GPIO_PSC3_7); /* Switch Restart */
- GP_SINT_ENABLE_O(GPIO_PSC3_8, 0); /* LED H2 */
- GP_SINT_ENABLE_O(GPIO_USB1_9, 0); /* LED H3 */
- GP_TIMER_ENABLE_O(4, 0); /* LED H4 */
- GP_TIMER_ENABLE_O(5, 0); /* LED H5 */
- GP_TIMER_ENABLE_O(3, 0); /* LED HB */
- GP_TIMER_ENABLE_O(1, 0); /* RES_COLDSTART */
-}
-
-#ifdef CONFIG_PREBOOT
-
-static uchar kbd_magic_prefix[] = "key_magic";
-static uchar kbd_command_prefix[] = "key_cmd";
-
-struct kbd_data_t {
- char s1;
-};
-
-struct kbd_data_t* get_keys (struct kbd_data_t *kbd_data)
-{
- volatile struct mpc5xxx_gpio *pgpio =
- (struct mpc5xxx_gpio *)MPC5XXX_GPIO;
-
- kbd_data->s1 = GP_SIMP_GET_I(GPIO_USB_8) << 3 | \
- GP_SIMP_GET_I(GPIO_USB_7) << 2 | \
- GP_SIMP_GET_I(GPIO_USB_6) << 1 | \
- GP_SIMP_GET_I(GPIO_USB_0) << 0;
- return kbd_data;
-}
-
-static int compare_magic (const struct kbd_data_t *kbd_data, char *str)
-{
- char s1 = str[0];
-
- if (s1 >= '0' && s1 <= '9')
- s1 -= '0';
- else if (s1 >= 'a' && s1 <= 'f')
- s1 = s1 - 'a' + 10;
- else if (s1 >= 'A' && s1 <= 'F')
- s1 = s1 - 'A' + 10;
- else
- return -1;
-
- if (s1 != kbd_data->s1) return -1;
- return 0;
-}
-
-static char *key_match (const struct kbd_data_t *kbd_data)
-{
- char magic[sizeof (kbd_magic_prefix) + 1];
- char *suffix;
- char *kbd_magic_keys;
-
- /*
- * The following string defines the characters that can be appended
- * to "key_magic" to form the names of environment variables that
- * hold "magic" key codes, i. e. such key codes that can cause
- * pre-boot actions. If the string is empty (""), then only
- * "key_magic" is checked (old behaviour); the string "125" causes
- * checks for "key_magic1", "key_magic2" and "key_magic5", etc.
- */
- if ((kbd_magic_keys = getenv ("magic_keys")) == NULL)
- kbd_magic_keys = "";
-
- /* loop over all magic keys;
- * use '\0' suffix in case of empty string
- */
- for (suffix = kbd_magic_keys; *suffix ||
- suffix == kbd_magic_keys; ++suffix) {
- sprintf (magic, "%s%c", kbd_magic_prefix, *suffix);
-
- if (compare_magic(kbd_data, getenv(magic)) == 0) {
- char cmd_name[sizeof (kbd_command_prefix) + 1];
- char *cmd;
-
- sprintf (cmd_name, "%s%c", kbd_command_prefix, *suffix);
- cmd = getenv (cmd_name);
-
- return (cmd);
- }
- }
-
- return (NULL);
-}
-
-#endif /* CONFIG_PREBOOT */
-
-int misc_init_r (void)
-{
- /* Init the I/O ports */
- init_ports ();
-
-#ifdef CONFIG_PREBOOT
- struct kbd_data_t kbd_data;
- /* Decode keys */
- char *str = strdup (key_match (get_keys (&kbd_data)));
- /* Set or delete definition */
- setenv ("preboot", str);
- free (str);
-#endif /* CONFIG_PREBOOT */
- return 0;
-}
-
-int board_early_init_r (void)
-{
- *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */
- *(vu_long *)MPC5XXX_BOOTCS_START =
- *(vu_long *)MPC5XXX_CS0_START = START_REG(CONFIG_SYS_FLASH_BASE);
- *(vu_long *)MPC5XXX_BOOTCS_STOP =
- *(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE);
- /* Interbus enable it here ?? */
- *(vu_long *)MPC5XXX_GPT6_ENABLE = GPT_OUT_1;
- return 0;
-}
-#ifdef CONFIG_PCI
-static struct pci_controller hose;
-
-extern void pci_mpc5xxx_init(struct pci_controller *);
-
-void pci_init_board(void)
-{
- pci_mpc5xxx_init(&hose);
-}
-#endif
-
-#if defined(CONFIG_HW_WATCHDOG)
-void hw_watchdog_reset(void)
-{
- /* Trigger HW Watchdog with TIMER_0 */
- *(vu_long *)MPC5XXX_GPT0_ENABLE = GPT_OUT_1;
- *(vu_long *)MPC5XXX_GPT0_ENABLE = GPT_OUT_0;
-}
-#endif
-
-#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
-int ft_board_setup(void *blob, bd_t *bd)
-{
- ft_cpu_setup(blob, bd);
-
- return 0;
-}
-#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */
generated by cgit v1.1 at 2024-11-05 09:04:54 +0000