summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/esd/common/fpga.c14
-rw-r--r--board/esd/common/lcd.h14
-rw-r--r--board/esd/common/xilinx_jtag/ports.c5
-rw-r--r--board/esd/dp405/dp405.c14
-rw-r--r--board/esd/du405/du405.c4
-rw-r--r--board/esd/du440/du440.c13
-rw-r--r--board/esd/hh405/hh405.c166
-rw-r--r--board/esd/hub405/hub405.c56
-rw-r--r--board/esd/pci405/pci405.c8
-rw-r--r--board/esd/plu405/plu405.c10
-rw-r--r--board/esd/pmc440/cmd_pmc440.c2
-rw-r--r--board/esd/pmc440/pmc440.c59
-rw-r--r--board/esd/tasreg/tasreg.c7
-rw-r--r--board/esd/voh405/voh405.c10
14 files changed, 217 insertions, 165 deletions
diff --git a/board/esd/common/fpga.c b/board/esd/common/fpga.c
index 5232ddd..62c3243 100644
--- a/board/esd/common/fpga.c
+++ b/board/esd/common/fpga.c
@@ -24,6 +24,7 @@
#include <common.h>
#include <asm/processor.h>
+#include <asm/io.h>
#include <command.h>
/* ------------------------------------------------------------------------- */
@@ -55,7 +56,7 @@
#define ERROR_FPGA_PRG_DONE -3 /* Timeout after programming */
#ifndef SET_FPGA
-# define SET_FPGA(data) out32(GPIO0_OR, data)
+# define SET_FPGA(data) out_be32((void *)GPIO0_OR, data)
#endif
#ifdef FPGA_PROG_ACTIVE_HIGH
@@ -85,10 +86,10 @@
SET_FPGA(FPGA_PRG_HIGH | FPGA_CLK_HIGH | FPGA_DATA_HIGH);} /* set data to 1 */
#ifndef FPGA_DONE_STATE
-# define FPGA_DONE_STATE (in32(GPIO0_IR) & FPGA_DONE)
+# define FPGA_DONE_STATE (in_be32((void *)GPIO0_IR) & FPGA_DONE)
#endif
#ifndef FPGA_INIT_STATE
-# define FPGA_INIT_STATE (in32(GPIO0_IR) & FPGA_INIT)
+# define FPGA_INIT_STATE (in_be32((void *)GPIO0_IR) & FPGA_INIT)
#endif
@@ -139,8 +140,11 @@ static int fpga_boot (const unsigned char *fpgadata, int size)
* Setup port pins for fpga programming
*/
#ifndef CONFIG_M5249
- out32 (GPIO0_ODR, 0x00000000); /* no open drain pins */
- out32 (GPIO0_TCR, in32 (GPIO0_TCR) | FPGA_PRG | FPGA_CLK | FPGA_DATA); /* setup for output */
+ out_be32 ((void *)GPIO0_ODR, 0x00000000); /* no open drain pins */
+ /* setup for output */
+ out_be32 ((void *)GPIO0_TCR,
+ in_be32 ((void *)GPIO0_TCR) |
+ FPGA_PRG | FPGA_CLK | FPGA_DATA);
#endif
SET_FPGA (FPGA_PRG_HIGH | FPGA_CLK_HIGH | FPGA_DATA_HIGH); /* set pins to high */
diff --git a/board/esd/common/lcd.h b/board/esd/common/lcd.h
index 3169e6b..01f6019 100644
--- a/board/esd/common/lcd.h
+++ b/board/esd/common/lcd.h
@@ -40,13 +40,13 @@
#define TRUE (!FALSE)
#endif
-#define S1D_WRITE_PALETTE(p,i,r,g,b) \
- { \
- ((volatile uchar*)(p))[palette_index] = (uchar)(i); \
- ((volatile uchar*)(p))[palette_value] = (uchar)(r); \
- ((volatile uchar*)(p))[palette_value] = (uchar)(g); \
- ((volatile uchar*)(p))[palette_value] = (uchar)(b); \
- }
+#define S1D_WRITE_PALETTE(p,i,r,g,b) \
+ { \
+ out_8(&((uchar*)(p))[palette_index], (uchar)(i)); \
+ out_8(&((uchar*)(p))[palette_index], (uchar)(r)); \
+ out_8(&((uchar*)(p))[palette_index], (uchar)(g)); \
+ out_8(&((uchar*)(p))[palette_index], (uchar)(b)); \
+ }
typedef struct
{
diff --git a/board/esd/common/xilinx_jtag/ports.c b/board/esd/common/xilinx_jtag/ports.c
index 3ad94a5..ac0d7ac 100644
--- a/board/esd/common/xilinx_jtag/ports.c
+++ b/board/esd/common/xilinx_jtag/ports.c
@@ -32,6 +32,7 @@
#include <common.h>
#include <asm/processor.h>
+#include <asm/io.h>
#include "ports.h"
@@ -68,7 +69,7 @@ void setPort(short p,short val)
} else {
output &= ~JTAG_TCK;
}
- out32(GPIO0_OR, output);
+ out_be32((void *)GPIO0_OR, output);
}
}
@@ -98,7 +99,7 @@ unsigned char readTDOBit(void)
{
unsigned long inputs;
- inputs = in32(GPIO0_IR);
+ inputs = in_be32((void *)GPIO0_IR);
if (inputs & JTAG_TDO)
return 1;
else
diff --git a/board/esd/dp405/dp405.c b/board/esd/dp405/dp405.c
index eb001da..c32c7c7 100644
--- a/board/esd/dp405/dp405.c
+++ b/board/esd/dp405/dp405.c
@@ -23,6 +23,7 @@
#include <common.h>
#include <asm/processor.h>
+#include <asm/io.h>
#include <command.h>
#include <malloc.h>
@@ -66,9 +67,11 @@ int board_early_init_f (void)
/*
* Reset CPLD via GPIO13 (CS4) pin
*/
- out32(GPIO0_OR, in32(GPIO0_OR) & ~(0x80000000 >> 13));
+ out_be32((void *)GPIO0_OR,
+ in_be32((void *)GPIO0_OR) & ~(0x80000000 >> 13));
udelay(1000); /* wait 1ms */
- out32(GPIO0_OR, in32(GPIO0_OR) | (0x80000000 >> 13));
+ out_be32((void *)GPIO0_OR,
+ in_be32((void *)GPIO0_OR) | (0x80000000 >> 13));
udelay(1000); /* wait 1ms */
return 0;
@@ -104,9 +107,10 @@ int checkboard (void)
puts(str);
}
- id1 = trans[(~(in32(GPIO0_IR) >> 5)) & 0x0000000f];
- id2 = trans[(~(in32(GPIO0_IR) >> 9)) & 0x0000000f];
- printf(" (ID=0x%1X%1X, PLD=0x%02X)\n", id2, id1, in8(0xf0001000));
+ id1 = trans[(~(in_be32((void *)GPIO0_IR) >> 5)) & 0x0000000f];
+ id2 = trans[(~(in_be32((void *)GPIO0_IR) >> 9)) & 0x0000000f];
+ printf(" (ID=0x%1X%1X, PLD=0x%02X)\n",
+ id2, id1, in_8((void *)0xf0001000));
return 0;
}
diff --git a/board/esd/du405/du405.c b/board/esd/du405/du405.c
index 3bb34fd..8e9ac28 100644
--- a/board/esd/du405/du405.c
+++ b/board/esd/du405/du405.c
@@ -188,8 +188,8 @@ int checkboard (void)
/*
* Reset external DUART via FPGA
*/
- *(volatile unsigned char *) FPGA_MODE_REG = 0xff; /* reset high active */
- *(volatile unsigned char *) FPGA_MODE_REG = 0x00; /* low again */
+ out_8((void *)FPGA_MODE_REG, 0xff); /* reset high active */
+ out_8((void *)FPGA_MODE_REG, 0x00); /* low again */
return 0;
}
diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c
index f9b91b5..45dfa6f 100644
--- a/board/esd/du440/du440.c
+++ b/board/esd/du440/du440.c
@@ -310,8 +310,8 @@ int misc_init_r(void)
int pld_revision(void)
{
- out8(CONFIG_SYS_CPLD_BASE, 0x00);
- return (int)(in8(CONFIG_SYS_CPLD_BASE) & CPLD_VERSION_MASK);
+ out_8((void *)CONFIG_SYS_CPLD_BASE, 0x00);
+ return (int)(in_8((void *)CONFIG_SYS_CPLD_BASE) & CPLD_VERSION_MASK);
}
int board_revision(void)
@@ -872,12 +872,12 @@ static int got_pldirq;
static int pld_interrupt(u32 arg)
{
int rc = -1; /* not for us */
- u8 status = in8(CONFIG_SYS_CPLD_BASE);
+ u8 status = in_8((void *)CONFIG_SYS_CPLD_BASE);
/* check for PLD interrupt */
if (status & PWR_INT_FLAG) {
/* reset this int */
- out8(CONFIG_SYS_CPLD_BASE, 0);
+ out_8((void *)CONFIG_SYS_CPLD_BASE, 0);
rc = 0;
got_pldirq = 1; /* trigger backend */
}
@@ -890,7 +890,7 @@ int do_waitpwrirq(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
got_pldirq = 0;
/* clear any pending interrupt */
- out8(CONFIG_SYS_CPLD_BASE, 0);
+ out_8((void *)CONFIG_SYS_CPLD_BASE, 0);
irq_install_handler(CPLD_IRQ,
(interrupt_handler_t *)pld_interrupt, 0);
@@ -906,7 +906,8 @@ int do_waitpwrirq(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
if (got_pldirq) {
printf("Got interrupt!\n");
printf("Power %sready!\n",
- in8(CONFIG_SYS_CPLD_BASE) & PWR_RDY ? "":"NOT ");
+ in_8((void *)CONFIG_SYS_CPLD_BASE) &
+ PWR_RDY ? "":"NOT ");
}
irq_free_handler(CPLD_IRQ);
diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c
index ae3bc80..eab952c 100644
--- a/board/esd/hh405/hh405.c
+++ b/board/esd/hh405/hh405.c
@@ -29,6 +29,7 @@
#include <common.h>
#include <asm/processor.h>
+#include <asm/io.h>
#include <command.h>
#include <malloc.h>
#include <pci.h>
@@ -36,6 +37,26 @@
DECLARE_GLOBAL_DATA_PTR;
+/* FPGA internal regs */
+#define FPGA_CTRL ((u16 *)(CONFIG_SYS_FPGA_BASE_ADDR + 0x000))
+#define FPGA_STATUS ((u16 *)(CONFIG_SYS_FPGA_BASE_ADDR + 0x002))
+#define FPGA_CTR ((u16 *)(CONFIG_SYS_FPGA_BASE_ADDR + 0x004))
+#define FPGA_BL ((u16 *)(CONFIG_SYS_FPGA_BASE_ADDR + 0x006))
+
+/* FPGA Control Reg */
+#define FPGA_CTRL_REV0 0x0001
+#define FPGA_CTRL_REV1 0x0002
+#define FPGA_CTRL_VGA0_BL 0x0004
+#define FPGA_CTRL_VGA0_BL_MODE 0x0008
+#define FPGA_CTRL_CF_RESET 0x0040
+#define FPGA_CTRL_PS2_PWR 0x0080
+#define FPGA_CTRL_CF_PWRN 0x0100 /* low active */
+#define FPGA_CTRL_CF_BUS_EN 0x0200
+#define FPGA_CTRL_LCD_CLK 0x7000 /* mask for lcd clock */
+#define FPGA_CTRL_OW_ENABLE 0x8000
+
+#define FPGA_STATUS_CF_DETECT 0x8000
+
#ifdef CONFIG_VIDEO_SM501
#define SWAP32(x) ((((x) & 0x000000ff) << 24) | (((x) & 0x0000ff00) << 8)|\
@@ -297,22 +318,22 @@ int board_revision(void)
/*
* Setup GPIO pins (BLAST/GPIO0 and GPIO9 as GPIO)
*/
- osrh_reg = in32(GPIO0_OSRH);
- isr1h_reg = in32(GPIO0_ISR1H);
- tcr_reg = in32(GPIO0_TCR);
- out32(GPIO0_OSRH, osrh_reg & ~0xC0003000); /* output select */
- out32(GPIO0_ISR1H, isr1h_reg | 0xC0003000); /* input select */
- out32(GPIO0_TCR, tcr_reg & ~0x80400000); /* select input */
+ osrh_reg = in_be32((void *)GPIO0_OSRH);
+ isr1h_reg = in_be32((void *)GPIO0_ISR1H);
+ tcr_reg = in_be32((void *)GPIO0_TCR);
+ out_be32((void *)GPIO0_OSRH, osrh_reg & ~0xC0003000); /* output select */
+ out_be32((void *)GPIO0_ISR1H, isr1h_reg | 0xC0003000); /* input select */
+ out_be32((void *)GPIO0_TCR, tcr_reg & ~0x80400000); /* select input */
udelay(1000); /* wait some time before reading input */
- value = in32(GPIO0_IR) & 0x80400000; /* get config bits */
+ value = in_be32((void *)GPIO0_IR) & 0x80400000; /* get config bits */
/*
* Restore GPIO settings
*/
- out32(GPIO0_OSRH, osrh_reg); /* output select */
- out32(GPIO0_ISR1H, isr1h_reg); /* input select */
- out32(GPIO0_TCR, tcr_reg); /* enable output driver for outputs */
+ out_be32((void *)GPIO0_OSRH, osrh_reg); /* output select */
+ out_be32((void *)GPIO0_ISR1H, isr1h_reg); /* input select */
+ out_be32((void *)GPIO0_TCR, tcr_reg); /* enable output driver for outputs */
if (value & 0x80000000) {
/* Revision 1.0 or 1.1 detected */
@@ -353,7 +374,7 @@ int board_early_init_f (void)
/*
* EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
*/
- mtebc (epcr, 0xa8400000); /* ebc always driven */
+ mtebc(epcr, 0xa8400000); /* ebc always driven */
return 0;
}
@@ -362,27 +383,26 @@ int cf_enable(void)
{
int i;
- volatile unsigned short *fpga_ctrl =
- (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
- volatile unsigned short *fpga_status =
- (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 2);
-
if (gd->board_type >= 2) {
- if (*fpga_status & CONFIG_SYS_FPGA_STATUS_CF_DETECT) {
- if (!(*fpga_ctrl & CONFIG_SYS_FPGA_CTRL_CF_BUS_EN)) {
- *fpga_ctrl &= ~CONFIG_SYS_FPGA_CTRL_CF_PWRN;
+ if (in_be16(FPGA_STATUS) & FPGA_STATUS_CF_DETECT) {
+ if (!(in_be16(FPGA_CTRL) & FPGA_CTRL_CF_BUS_EN)) {
+ out_be16(FPGA_CTRL,
+ in_be16(FPGA_CTRL) & ~FPGA_CTRL_CF_PWRN);
for (i=0; i<300; i++)
udelay(1000);
- *fpga_ctrl |= CONFIG_SYS_FPGA_CTRL_CF_BUS_EN;
+ out_be16(FPGA_CTRL,
+ in_be16(FPGA_CTRL) | FPGA_CTRL_CF_BUS_EN);
for (i=0; i<20; i++)
udelay(1000);
}
} else {
- *fpga_ctrl &= ~CONFIG_SYS_FPGA_CTRL_CF_BUS_EN;
- *fpga_ctrl |= CONFIG_SYS_FPGA_CTRL_CF_PWRN;
+ out_be16(FPGA_CTRL,
+ in_be16(FPGA_CTRL) & ~FPGA_CTRL_CF_BUS_EN);
+ out_be16(FPGA_CTRL,
+ in_be16(FPGA_CTRL) | FPGA_CTRL_CF_PWRN);
}
}
@@ -391,12 +411,6 @@ int cf_enable(void)
int misc_init_r (void)
{
- volatile unsigned short *fpga_ctrl =
- (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
- volatile unsigned short *lcd_contrast =
- (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 4);
- volatile unsigned short *lcd_backlight =
- (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 6);
unsigned char *dst;
ulong len = sizeof(fpgadata);
int status;
@@ -460,36 +474,43 @@ int misc_init_r (void)
/*
* Reset FPGA via FPGA_INIT pin
*/
- out32(GPIO0_TCR, in32(GPIO0_TCR) | FPGA_INIT); /* setup FPGA_INIT as output */
- out32(GPIO0_OR, in32(GPIO0_OR) & ~FPGA_INIT); /* reset low */
+ /* setup FPGA_INIT as output */
+ out_be32((void *)GPIO0_TCR,
+ in_be32((void *)GPIO0_TCR) | FPGA_INIT);
+ out_be32((void *)GPIO0_OR,
+ in_be32((void *)GPIO0_OR) & ~FPGA_INIT); /* reset low */
udelay(1000); /* wait 1ms */
- out32(GPIO0_OR, in32(GPIO0_OR) | FPGA_INIT); /* reset high */
+ out_be32((void *)GPIO0_OR,
+ in_be32((void *)GPIO0_OR) | FPGA_INIT); /* reset high */
udelay(1000); /* wait 1ms */
/*
* Write Board revision into FPGA
*/
- *fpga_ctrl |= gd->board_type & 0x0003;
+ out_be16(FPGA_CTRL, in_be16(FPGA_CTRL) | (gd->board_type & 0x0003));
/*
* Setup and enable EEPROM write protection
*/
- out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
+ out_be32((void *)GPIO0_OR,
+ in_be32((void *)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
/*
* Reset touch-screen controller
*/
- out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_TOUCH_RST);
+ out_be32((void *)GPIO0_OR,
+ in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_TOUCH_RST);
udelay(1000);
- out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_TOUCH_RST);
+ out_be32((void *)GPIO0_OR,
+ in_be32((void *)GPIO0_OR) | CONFIG_SYS_TOUCH_RST);
/*
* Enable power on PS/2 interface (with reset)
*/
- *fpga_ctrl &= ~(CONFIG_SYS_FPGA_CTRL_PS2_PWR);
+ out_be16(FPGA_CTRL, in_be16(FPGA_CTRL) & ~FPGA_CTRL_PS2_PWR);
for (i=0;i<500;i++)
udelay(1000);
- *fpga_ctrl |= (CONFIG_SYS_FPGA_CTRL_PS2_PWR);
+ out_be16(FPGA_CTRL, in_be16(FPGA_CTRL) | FPGA_CTRL_PS2_PWR);
/*
* Get contrast value from environment variable
@@ -498,7 +519,8 @@ int misc_init_r (void)
if (str) {
contrast0 = simple_strtol(str, NULL, 16);
if (contrast0 > 255) {
- printf("ERROR: contrast0 value too high (0x%lx)!\n", contrast0);
+ printf("ERROR: contrast0 value too high (0x%lx)!\n",
+ contrast0);
contrast0 = 0xffffffff;
}
}
@@ -512,8 +534,9 @@ int misc_init_r (void)
/*
* Switch backlight on
*/
- *fpga_ctrl |= CONFIG_SYS_FPGA_CTRL_VGA0_BL;
- *lcd_backlight = 0x0000;
+ out_be16(FPGA_CTRL,
+ in_be16(FPGA_CTRL) | FPGA_CTRL_VGA0_BL);
+ out_be16(FPGA_BL, 0x0000);
lcd_setup(1, 0);
lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG, (uchar *)CONFIG_SYS_LCD_BIG_MEM,
@@ -524,8 +547,9 @@ int misc_init_r (void)
/*
* Switch backlight on
*/
- *fpga_ctrl &= ~CONFIG_SYS_FPGA_CTRL_VGA0_BL;
- *lcd_backlight = 0x0000;
+ out_be16(FPGA_CTRL,
+ in_be16(FPGA_CTRL) & ~FPGA_CTRL_VGA0_BL);
+ out_be16(FPGA_BL, 0x0000);
lcd_setup(1, 0);
lcd_init((uchar *)CONFIG_SYS_LCD_BIG_REG, (uchar *)CONFIG_SYS_LCD_BIG_MEM,
@@ -537,19 +561,22 @@ int misc_init_r (void)
* Set default display contrast voltage
*/
if (contrast0 == 0xffffffff) {
- *lcd_contrast = 0x0082;
+ out_be16(FPGA_CTR, 0x0082);
} else {
- *lcd_contrast = contrast0;
+ out_be16(FPGA_CTR, contrast0);
}
- *lcd_backlight = 0xffff;
+ out_be16(FPGA_BL, 0xffff);
/*
* Switch backlight on
*/
- *fpga_ctrl |= CONFIG_SYS_FPGA_CTRL_VGA0_BL | CONFIG_SYS_FPGA_CTRL_VGA0_BL_MODE;
+ out_be16(FPGA_CTRL,
+ in_be16(FPGA_CTRL) |
+ FPGA_CTRL_VGA0_BL |
+ FPGA_CTRL_VGA0_BL_MODE);
/*
* Set lcd clock (small epson)
*/
- *fpga_ctrl |= LCD_CLK_06250;
+ out_be16(FPGA_CTRL, in_be16(FPGA_CTRL) | LCD_CLK_06250);
udelay(100); /* wait for 100 us */
lcd_setup(0, 1);
@@ -562,19 +589,25 @@ int misc_init_r (void)
* Set default display contrast voltage
*/
if (contrast0 == 0xffffffff) {
- *lcd_contrast = 0x0060;
+ out_be16(FPGA_CTR, 0x0060);
} else {
- *lcd_contrast = contrast0;
+ out_be16(FPGA_CTR, contrast0);
}
- *lcd_backlight = 0xffff;
+ out_be16(FPGA_BL, 0xffff);
/*
* Switch backlight on
*/
- *fpga_ctrl |= CONFIG_SYS_FPGA_CTRL_VGA0_BL | CONFIG_SYS_FPGA_CTRL_VGA0_BL_MODE;
+ out_be16(FPGA_CTRL,
+ in_be16(FPGA_CTRL) |
+ FPGA_CTRL_VGA0_BL |
+ FPGA_CTRL_VGA0_BL_MODE);
/*
* Set lcd clock (small epson), enable 1-wire interface
*/
- *fpga_ctrl |= LCD_CLK_08330 | CONFIG_SYS_FPGA_CTRL_OW_ENABLE;
+ out_be16(FPGA_CTRL,
+ in_be16(FPGA_CTRL) |
+ LCD_CLK_08330 |
+ FPGA_CTRL_OW_ENABLE);
lcd_setup(0, 1);
lcd_init((uchar *)CONFIG_SYS_LCD_SMALL_REG, (uchar *)CONFIG_SYS_LCD_SMALL_MEM,
@@ -593,10 +626,10 @@ int misc_init_r (void)
puts("VGA: SM501 with 8 MB ");
if (strcmp(str, "ppc221") == 0) {
printf("(800*600, %dbpp)\n", BPP);
- *lcd_backlight = 0x002d; /* max. allowed brightness */
+ out_be16(FPGA_BL, 0x002d); /* max. allowed brightness */
} else if (strcmp(str, "ppc231") == 0) {
printf("(1024*768, %dbpp)\n", BPP);
- *lcd_backlight = 0x0000;
+ out_be16(FPGA_BL, 0x0000);
} else {
printf("Unsupported bd_type defined (%s) -> No display configured!\n", str);
return 0;
@@ -646,21 +679,21 @@ int checkboard (void)
#ifdef CONFIG_IDE_RESET
void ide_set_reset(int on)
{
- volatile unsigned short *fpga_mode =
- (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
- volatile unsigned short *fpga_status =
- (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL + 2);
-
- if (((gd->board_type >= 2) && (*fpga_status & CONFIG_SYS_FPGA_STATUS_CF_DETECT)) ||
+ if (((gd->board_type >= 2) &&
+ (in_be16(FPGA_STATUS) & FPGA_STATUS_CF_DETECT)) ||
(gd->board_type < 2)) {
/*
* Assert or deassert CompactFlash Reset Pin
*/
if (on) { /* assert RESET */
cf_enable();
- *fpga_mode &= ~(CONFIG_SYS_FPGA_CTRL_CF_RESET);
+ out_be16(FPGA_CTRL,
+ in_be16(FPGA_CTRL) &
+ ~FPGA_CTRL_CF_RESET);
} else { /* release RESET */
- *fpga_mode |= CONFIG_SYS_FPGA_CTRL_CF_RESET;
+ out_be16(FPGA_CTRL,
+ in_be16(FPGA_CTRL) |
+ FPGA_CTRL_CF_RESET);
}
}
}
@@ -684,17 +717,20 @@ int eeprom_write_enable (unsigned dev_addr, int state)
switch (state) {
case 1:
/* Enable write access, clear bit GPIO_SINT2. */
- out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
+ out_be32((void *)GPIO0_OR,
+ in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
state = 0;
break;
case 0:
/* Disable write access, set bit GPIO_SINT2. */
- out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
+ out_be32((void *)GPIO0_OR,
+ in_be32((void *)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
state = 0;
break;
default:
/* Read current status back. */
- state = (0 == (in32(GPIO0_OR) & CONFIG_SYS_EEPROM_WP));
+ state = (0 == (in_be32((void *)GPIO0_OR) &
+ CONFIG_SYS_EEPROM_WP));
break;
}
}
diff --git a/board/esd/hub405/hub405.c b/board/esd/hub405/hub405.c
index 8785e6c..03e5ad7 100644
--- a/board/esd/hub405/hub405.c
+++ b/board/esd/hub405/hub405.c
@@ -23,6 +23,7 @@
#include <common.h>
#include <asm/processor.h>
+#include <asm/io.h>
#include <command.h>
#include <malloc.h>
@@ -44,22 +45,22 @@ int board_revision(void)
/*
* Setup GPIO pin(s) (IRQ6/GPIO23)
*/
- osrl_reg = in32(GPIO0_OSRH);
- isr1l_reg = in32(GPIO0_ISR1H);
- tcr_reg = in32(GPIO0_TCR);
- out32(GPIO0_OSRH, osrl_reg & ~0x00030000); /* output select */
- out32(GPIO0_ISR1H, isr1l_reg | 0x00030000); /* input select */
- out32(GPIO0_TCR, tcr_reg & ~0x00000100); /* select input */
+ osrl_reg = in_be32((void *)GPIO0_OSRH);
+ isr1l_reg = in_be32((void *)GPIO0_ISR1H);
+ tcr_reg = in_be32((void *)GPIO0_TCR);
+ out_be32((void *)GPIO0_OSRH, osrl_reg & ~0x00030000); /* output select */
+ out_be32((void *)GPIO0_ISR1H, isr1l_reg | 0x00030000); /* input select */
+ out_be32((void *)GPIO0_TCR, tcr_reg & ~0x00000100); /* select input */
udelay(1000); /* wait some time before reading input */
- value = in32(GPIO0_IR) & 0x00000100; /* get config bits */
+ value = in_be32((void *)GPIO0_IR) & 0x00000100; /* get config bits */
/*
* Restore GPIO settings
*/
- out32(GPIO0_OSRH, osrl_reg); /* output select */
- out32(GPIO0_ISR1H, isr1l_reg); /* input select */
- out32(GPIO0_TCR, tcr_reg); /* enable output driver for outputs */
+ out_be32((void *)GPIO0_OSRH, osrl_reg); /* output select */
+ out_be32((void *)GPIO0_ISR1H, isr1l_reg); /* input select */
+ out_be32((void *)GPIO0_TCR, tcr_reg); /* enable output driver for outputs */
if (value & 0x00000100) {
/* Revision 1.1 or 1.2 detected */
@@ -101,13 +102,9 @@ int board_early_init_f (void)
return 0;
}
+#define LED_REG (DUART0_BA + 0x20)
int misc_init_r (void)
{
- volatile unsigned char *duart0_mcr = (unsigned char *)((ulong)DUART0_BA + 4);
- volatile unsigned char *duart1_mcr = (unsigned char *)((ulong)DUART1_BA + 4);
- volatile unsigned char *duart2_mcr = (unsigned char *)((ulong)DUART2_BA + 4);
- volatile unsigned char *duart3_mcr = (unsigned char *)((ulong)DUART3_BA + 4);
- volatile unsigned char *led_reg = (unsigned char *)((ulong)DUART0_BA + 0x20);
unsigned long val;
int delay, flashcnt;
char *str;
@@ -116,16 +113,17 @@ int misc_init_r (void)
/*
* Enable interrupts in exar duart mcr[3]
*/
- *duart0_mcr = 0x08;
- *duart1_mcr = 0x08;
- *duart2_mcr = 0x08;
- *duart3_mcr = 0x08;
+ out_8((void *)(DUART0_BA + 4), 0x08);
+ out_8((void *)(DUART1_BA + 4), 0x08);
+ out_8((void *)(DUART2_BA + 4), 0x08);
+ out_8((void *)(DUART3_BA + 4), 0x08);
/*
* Set RS232/RS422 control (RS232 = high on GPIO)
*/
- val = in32(GPIO0_OR);
- val &= ~(CONFIG_SYS_UART2_RS232 | CONFIG_SYS_UART3_RS232 | CONFIG_SYS_UART4_RS232 | CONFIG_SYS_UART5_RS232);
+ val = in_be32((void *)GPIO0_OR);
+ val &= ~(CONFIG_SYS_UART2_RS232 | CONFIG_SYS_UART3_RS232 |
+ CONFIG_SYS_UART4_RS232 | CONFIG_SYS_UART5_RS232);
str = getenv("phys0");
if (!str || (str && (str[0] == '0')))
@@ -143,7 +141,7 @@ int misc_init_r (void)
if (!str || (str && (str[0] == '0')))
val |= CONFIG_SYS_UART5_RS232;
- out32(GPIO0_OR, val);
+ out_be32((void *)GPIO0_OR, val);
/*
* check board type and setup AP power
@@ -160,23 +158,27 @@ int misc_init_r (void)
* Flash LEDs
*/
for (flashcnt = 0; flashcnt < 3; flashcnt++) {
- *led_reg = led_reg_default; /* LED_A..D off */
+ /* LED_A..D off */
+ out_8((void *)LED_REG, led_reg_default);
for (delay = 0; delay < 100; delay++)
udelay(1000);
- *led_reg = led_reg_default | 0xf0; /* LED_A..D on */
+ /* LED_A..D on */
+ out_8((void *)LED_REG, led_reg_default | 0xf0);
for (delay = 0; delay < 50; delay++)
udelay(1000);
}
- *led_reg = led_reg_default;
+ out_8((void *)LED_REG, led_reg_default);
}
}
/*
* Reset external DUARTs
*/
- out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_DUART_RST); /* set reset to high */
+ out_be32((void *)GPIO0_OR,
+ in_be32((void *)GPIO0_OR) | CONFIG_SYS_DUART_RST); /* set reset to high */
udelay(10); /* wait 10us */
- out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_DUART_RST); /* set reset to low */
+ out_be32((void *)GPIO0_OR,
+ in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_DUART_RST); /* set reset to low */
udelay(1000); /* wait 1ms */
/*
diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c
index 0602abf..8973f97 100644
--- a/board/esd/pci405/pci405.c
+++ b/board/esd/pci405/pci405.c
@@ -338,17 +338,17 @@ int checkboard (void)
}
/* ------------------------------------------------------------------------- */
+#define UART1_MCR 0xef600404
int wpeeprom(int wp)
{
int wp_state = wp;
- volatile unsigned char *uart1_mcr = (volatile unsigned char *)0xef600404;
if (wp == 1) {
- *uart1_mcr &= ~0x02;
+ out_8((void *)UART1_MCR, in_8((void *)UART1_MCR) & ~0x02);
} else if (wp == 0) {
- *uart1_mcr |= 0x02;
+ out_8((void *)UART1_MCR, in_8((void *)UART1_MCR) | 0x02);
} else {
- if (*uart1_mcr & 0x02) {
+ if (in_8((void *)UART1_MCR) & 0x02) {
wp_state = 0;
} else {
wp_state = 1;
diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c
index 7c0aaa2..a94604a 100644
--- a/board/esd/plu405/plu405.c
+++ b/board/esd/plu405/plu405.c
@@ -237,18 +237,18 @@ int checkboard (void)
}
#ifdef CONFIG_IDE_RESET
+#define FPGA_CTRL (CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL)
void ide_set_reset(int on)
{
- volatile unsigned short *fpga_mode =
- (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
-
/*
* Assert or deassert CompactFlash Reset Pin
*/
if (on) { /* assert RESET */
- *fpga_mode &= ~(CONFIG_SYS_FPGA_CTRL_CF_RESET);
+ out_be16((void *)FPGA_CTRL,
+ in_be16((void *)FPGA_CTRL) & ~CONFIG_SYS_FPGA_CTRL_CF_RESET);
} else { /* release RESET */
- *fpga_mode |= CONFIG_SYS_FPGA_CTRL_CF_RESET;
+ out_be16((void *)FPGA_CTRL,
+ in_be16((void *)FPGA_CTRL) | CONFIG_SYS_FPGA_CTRL_CF_RESET);
}
}
#endif /* CONFIG_IDE_RESET */
diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c
index 7808d4d..0fbc3dc 100644
--- a/board/esd/pmc440/cmd_pmc440.c
+++ b/board/esd/pmc440/cmd_pmc440.c
@@ -242,7 +242,7 @@ int do_fifo(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
"address %08x\n",
n, data, f);
for (i=0; i<n; i++)
- out32(f, data);
+ out_be32((void *)f, data);
}
} else {
printf("Usage:\nfifo %s\n", cmdtp->help);
diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c
index 3824105..2ab944d 100644
--- a/board/esd/pmc440/pmc440.c
+++ b/board/esd/pmc440/pmc440.c
@@ -107,31 +107,31 @@ int board_early_init_f(void)
* Setup the GPIO pins
* TODO: setup GPIOs via CONFIG_SYS_4xx_GPIO_TABLE in board's config file
*/
- out32(GPIO0_OR, 0x40000102);
- out32(GPIO0_TCR, 0x4c90011f);
- out32(GPIO0_OSRL, 0x28051400);
- out32(GPIO0_OSRH, 0x55005000);
- out32(GPIO0_TSRL, 0x08051400);
- out32(GPIO0_TSRH, 0x55005000);
- out32(GPIO0_ISR1L, 0x54000000);
- out32(GPIO0_ISR1H, 0x00000000);
- out32(GPIO0_ISR2L, 0x44000000);
- out32(GPIO0_ISR2H, 0x00000100);
- out32(GPIO0_ISR3L, 0x00000000);
- out32(GPIO0_ISR3H, 0x00000000);
-
- out32(GPIO1_OR, 0x80002408);
- out32(GPIO1_TCR, 0xd6003c08);
- out32(GPIO1_OSRL, 0x0a5a0000);
- out32(GPIO1_OSRH, 0x00000000);
- out32(GPIO1_TSRL, 0x00000000);
- out32(GPIO1_TSRH, 0x00000000);
- out32(GPIO1_ISR1L, 0x00005555);
- out32(GPIO1_ISR1H, 0x40000000);
- out32(GPIO1_ISR2L, 0x04010000);
- out32(GPIO1_ISR2H, 0x00000000);
- out32(GPIO1_ISR3L, 0x01400000);
- out32(GPIO1_ISR3H, 0x00000000);
+ out_be32((void *)GPIO0_OR, 0x40000102);
+ out_be32((void *)GPIO0_TCR, 0x4c90011f);
+ out_be32((void *)GPIO0_OSRL, 0x28051400);
+ out_be32((void *)GPIO0_OSRH, 0x55005000);
+ out_be32((void *)GPIO0_TSRL, 0x08051400);
+ out_be32((void *)GPIO0_TSRH, 0x55005000);
+ out_be32((void *)GPIO0_ISR1L, 0x54000000);
+ out_be32((void *)GPIO0_ISR1H, 0x00000000);
+ out_be32((void *)GPIO0_ISR2L, 0x44000000);
+ out_be32((void *)GPIO0_ISR2H, 0x00000100);
+ out_be32((void *)GPIO0_ISR3L, 0x00000000);
+ out_be32((void *)GPIO0_ISR3H, 0x00000000);
+
+ out_be32((void *)GPIO1_OR, 0x80002408);
+ out_be32((void *)GPIO1_TCR, 0xd6003c08);
+ out_be32((void *)GPIO1_OSRL, 0x0a5a0000);
+ out_be32((void *)GPIO1_OSRH, 0x00000000);
+ out_be32((void *)GPIO1_TSRL, 0x00000000);
+ out_be32((void *)GPIO1_TSRH, 0x00000000);
+ out_be32((void *)GPIO1_ISR1L, 0x00005555);
+ out_be32((void *)GPIO1_ISR1H, 0x40000000);
+ out_be32((void *)GPIO1_ISR2L, 0x04010000);
+ out_be32((void *)GPIO1_ISR2H, 0x00000000);
+ out_be32((void *)GPIO1_ISR3L, 0x01400000);
+ out_be32((void *)GPIO1_ISR3H, 0x00000000);
/* patch PLB:PCI divider for 66MHz PCI */
mfcpr(clk_spcid, reg);
@@ -804,17 +804,20 @@ int eeprom_write_enable(unsigned dev_addr, int state)
switch (state) {
case 1:
/* Enable write access, clear bit GPIO_SINT2. */
- out32(GPIO0_OR, in32(GPIO0_OR) & ~GPIO0_EP_EEP);
+ out_be32((void *)GPIO0_OR,
+ in_be32((void *)GPIO0_OR) & ~GPIO0_EP_EEP);
state = 0;
break;
case 0:
/* Disable write access, set bit GPIO_SINT2. */
- out32(GPIO0_OR, in32(GPIO0_OR) | GPIO0_EP_EEP);
+ out_be32((void *)GPIO0_OR,
+ in_be32((void *)GPIO0_OR) | GPIO0_EP_EEP);
state = 0;
break;
default:
/* Read current status back. */
- state = (0 == (in32(GPIO0_OR) & GPIO0_EP_EEP));
+ state = (0 == (in_be32((void *)GPIO0_OR)
+ & GPIO0_EP_EEP));
break;
}
}
diff --git a/board/esd/tasreg/tasreg.c b/board/esd/tasreg/tasreg.c
index 80ff237..760c71d 100644
--- a/board/esd/tasreg/tasreg.c
+++ b/board/esd/tasreg/tasreg.c
@@ -25,6 +25,7 @@
#include <command.h>
#include <malloc.h>
#include <asm/m5249.h>
+#include <asm/io.h>
/* Prototypes */
@@ -118,7 +119,7 @@ phys_size_t initdram (int board_type) {
/** Precharge sequence **/
mbar_writeLong(MCFSIM_DACR0, 0x0000332c); /* Set DACR0[IP] (bit 3) */
- *((volatile unsigned long *) 0x00) = junk; /* write to a memory location to init. precharge */
+ out_be32((void *)0, junk); /* write to a memory location to init. precharge */
udelay(0x10); /* Allow several Precharge cycles */
/** Refresh Sequence **/
@@ -127,7 +128,7 @@ phys_size_t initdram (int board_type) {
/** Mode Register initialization **/
mbar_writeLong(MCFSIM_DACR0, 0x0000b364); /* Enable DACR0[IMRS] (bit 6); RE remains enabled */
- *((volatile unsigned long *) 0x800) = junk; /* Access RAM to initialize the mode register */
+ out_be32((void *)0x800, junk); /* Access RAM to initialize the mode register */
return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
};
@@ -258,7 +259,7 @@ int do_codec(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
uchar buf[8];
- *(volatile ushort *)0xe0000000 = 0x4000;
+ out_be16((void *)0xe0000000, 0x4000);
udelay(5000); /* wait for 5ms */
diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c
index 5480105..96a04b3 100644
--- a/board/esd/voh405/voh405.c
+++ b/board/esd/voh405/voh405.c
@@ -297,18 +297,18 @@ int checkboard (void)
}
#ifdef CONFIG_IDE_RESET
+#define FPGA_MODE (CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL)
void ide_set_reset(int on)
{
- volatile unsigned short *fpga_mode =
- (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL);
-
/*
* Assert or deassert CompactFlash Reset Pin
*/
if (on) { /* assert RESET */
- *fpga_mode &= ~(CONFIG_SYS_FPGA_CTRL_CF_RESET);
+ out_be16((void *)FPGA_MODE,
+ in_be16((void *)FPGA_MODE) & ~CONFIG_SYS_FPGA_CTRL_CF_RESET);
} else { /* release RESET */
- *fpga_mode |= CONFIG_SYS_FPGA_CTRL_CF_RESET;
+ out_be16((void *)FPGA_MODE,
+ in_be16((void *)FPGA_MODE) | CONFIG_SYS_FPGA_CTRL_CF_RESET);
}
}
#endif /* CONFIG_IDE_RESET */
generated by cgit v1.1 at 2024-11-02 12:52:30 +0000