diff options
Diffstat (limited to 'board')
58 files changed, 2988 insertions, 1199 deletions
diff --git a/board/avionic-design/dts/tegra20-medcom-wide.dts b/board/avionic-design/dts/tegra20-medcom-wide.dts index f916122..e46afbe 100644 --- a/board/avionic-design/dts/tegra20-medcom-wide.dts +++ b/board/avionic-design/dts/tegra20-medcom-wide.dts @@ -14,18 +14,17 @@ reg = <0x00000000 0x20000000>; }; - clocks { - clk_32k: clk_32k { - clock-frequency = <32000>; - }; + host1x { + status = "okay"; - osc { - clock-frequency = <12000000>; - }; - }; + dc@54200000 { + status = "okay"; - clock@60006000 { - clocks = <&clk_32k &osc>; + rgb { + nvidia,panel = <&lcd_panel>; + status = "okay"; + }; + }; }; serial@70006300 { @@ -55,4 +54,23 @@ usb@c5004000 { status = "disabled"; }; + + lcd_panel: panel { + clock = <61715000>; + xres = <1366>; + yres = <768>; + left-margin = <2>; + right-margin = <47>; + hsync-len = <136>; + lower-margin = <21>; + upper-margin = <11>; + vsync-len = <4>; + + nvidia,bits-per-pixel = <16>; + nvidia,pwm = <&pwm 0 500000>; + nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */ + nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ + nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */ + nvidia,panel-timings = <0 0 0 0>; + }; }; diff --git a/board/avionic-design/dts/tegra20-plutux.dts b/board/avionic-design/dts/tegra20-plutux.dts index 78c394f..3e6cce0 100644 --- a/board/avionic-design/dts/tegra20-plutux.dts +++ b/board/avionic-design/dts/tegra20-plutux.dts @@ -14,20 +14,6 @@ reg = <0x00000000 0x20000000>; }; - clocks { - clk_32k: clk_32k { - clock-frequency = <32000>; - }; - - osc { - clock-frequency = <12000000>; - }; - }; - - clock@60006000 { - clocks = <&clk_32k &osc>; - }; - serial@70006300 { clock-frequency = <216000000>; }; diff --git a/board/avionic-design/dts/tegra20-tec.dts b/board/avionic-design/dts/tegra20-tec.dts index 50ea3b5..bf3ff1d 100644 --- a/board/avionic-design/dts/tegra20-tec.dts +++ b/board/avionic-design/dts/tegra20-tec.dts @@ -14,24 +14,34 @@ reg = <0x00000000 0x20000000>; }; - clocks { - clk_32k: clk_32k { - clock-frequency = <32000>; - }; + host1x { + status = "okay"; - osc { - clock-frequency = <12000000>; - }; - }; + dc@54200000 { + status = "okay"; - clock@60006000 { - clocks = <&clk_32k &osc>; + rgb { + nvidia,panel = <&lcd_panel>; + status = "okay"; + }; + }; }; serial@70006300 { clock-frequency = <216000000>; }; + nand-controller@70008000 { + nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */ + nvidia,width = <8>; + nvidia,timing = <26 100 20 80 20 10 12 10 70>; + + nand@0 { + reg = <0>; + compatible = "hynix,hy27uf4g2b", "nand-flash"; + }; + }; + i2c@7000c000 { status = "disabled"; }; @@ -56,14 +66,22 @@ status = "disabled"; }; - nand-controller@70008000 { - nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */ - nvidia,width = <8>; - nvidia,timing = <26 100 20 80 20 10 12 10 70>; - - nand@0 { - reg = <0>; - compatible = "hynix,hy27uf4g2b", "nand-flash"; - }; + lcd_panel: panel { + clock = <33260000>; + xres = <800>; + yres = <480>; + left-margin = <120>; + right-margin = <120>; + hsync-len = <16>; + lower-margin = <15>; + upper-margin = <15>; + vsync-len = <15>; + + nvidia,bits-per-pixel = <16>; + nvidia,pwm = <&pwm 0 500000>; + nvidia,backlight-enable-gpios = <&gpio 13 0>; /* PB5 */ + nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ + nvidia,lvds-shutdown-gpios = <&gpio 10 0>; /* PB2 */ + nvidia,panel-timings = <0 0 0 0>; }; }; diff --git a/board/bluegiga/apx4devkit/apx4devkit.c b/board/bluegiga/apx4devkit/apx4devkit.c index ae48ab5..5927693 100644 --- a/board/bluegiga/apx4devkit/apx4devkit.c +++ b/board/bluegiga/apx4devkit/apx4devkit.c @@ -43,12 +43,12 @@ DECLARE_GLOBAL_DATA_PTR; int board_early_init_f(void) { /* IO0 clock at 480MHz */ - mx28_set_ioclk(MXC_IOCLK0, 480000); + mxs_set_ioclk(MXC_IOCLK0, 480000); /* IO1 clock at 480MHz */ - mx28_set_ioclk(MXC_IOCLK1, 480000); + mxs_set_ioclk(MXC_IOCLK1, 480000); /* SSP0 clock at 96MHz */ - mx28_set_sspclk(MXC_SSPCLK0, 96000, 0); + mxs_set_sspclk(MXC_SSPCLK0, 96000, 0); return 0; } @@ -69,7 +69,7 @@ int board_init(void) #ifdef CONFIG_CMD_MMC int board_mmc_init(bd_t *bis) { - return mxsmmc_initialize(bis, 0, NULL); + return mxsmmc_initialize(bis, 0, NULL, NULL); } #endif diff --git a/board/compal/dts/tegra20-paz00.dts b/board/compal/dts/tegra20-paz00.dts index 9e3e169..31b064d 100644 --- a/board/compal/dts/tegra20-paz00.dts +++ b/board/compal/dts/tegra20-paz00.dts @@ -14,17 +14,15 @@ reg = <0x00000000 0x20000000>; }; - clocks { - clk_32k: clk_32k { - clock-frequency = <32000>; + host1x { + status = "okay"; + dc@54200000 { + status = "okay"; + rgb { + status = "okay"; + nvidia,panel = <&lcd_panel>; + }; }; - osc { - clock-frequency = <12000000>; - }; - }; - - clock@60006000 { - clocks = <&clk_32k &osc>; }; serial@70006000 { @@ -54,4 +52,25 @@ usb@c5004000 { status = "disabled"; }; + + lcd_panel: panel { + /* PAZ00 has 1024x600 */ + clock = <54030000>; + xres = <1024>; + yres = <600>; + right-margin = <160>; + left-margin = <24>; + hsync-len = <136>; + upper-margin = <3>; + lower-margin = <61>; + vsync-len = <6>; + hsync-active-high; + nvidia,bits-per-pixel = <16>; + nvidia,pwm = <&pwm 0 0>; + nvidia,backlight-enable-gpios = <&gpio 164 0>; /* PU4 */ + nvidia,lvds-shutdown-gpios = <&gpio 102 0>; /* PM6 */ + nvidia,backlight-vdd-gpios = <&gpio 176 0>; /* PW0 */ + nvidia,panel-vdd-gpios = <&gpio 4 0>; /* PA4 */ + nvidia,panel-timings = <400 4 203 17 15>; + }; }; diff --git a/board/compal/paz00/paz00.c b/board/compal/paz00/paz00.c index 6492d41..1447f47 100644 --- a/board/compal/paz00/paz00.c +++ b/board/compal/paz00/paz00.c @@ -71,3 +71,14 @@ int board_mmc_init(bd_t *bd) return 0; } #endif + +#ifdef CONFIG_LCD +/* this is a weak define that we are overriding */ +void pin_mux_display(void) +{ + debug("init display pinmux\n"); + + /* EN_VDD_PANEL GPIO A4 */ + pinmux_tristate_disable(PINGRP_DAP2); +} +#endif diff --git a/board/compulab/dts/tegra20-trimslice.dts b/board/compulab/dts/tegra20-trimslice.dts index 4450674..7aeed67 100644 --- a/board/compulab/dts/tegra20-trimslice.dts +++ b/board/compulab/dts/tegra20-trimslice.dts @@ -15,19 +15,6 @@ reg = <0x00000000 0x40000000>; }; - clocks { - clk_32k: clk_32k { - clock-frequency = <32000>; - }; - osc { - clock-frequency = <12000000>; - }; - }; - - clock@60006000 { - clocks = <&clk_32k &osc>; - }; - serial@70006000 { clock-frequency = <216000000>; }; @@ -36,6 +23,11 @@ status = "disabled"; }; + spi@7000c380 { + status = "okay"; + spi-max-frequency = <25000000>; + }; + i2c@7000c400 { status = "disabled"; }; diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c index 9d6db65..d93efaf 100644 --- a/board/denx/m28evk/m28evk.c +++ b/board/denx/m28evk/m28evk.c @@ -43,14 +43,14 @@ DECLARE_GLOBAL_DATA_PTR; int board_early_init_f(void) { /* IO0 clock at 480MHz */ - mx28_set_ioclk(MXC_IOCLK0, 480000); + mxs_set_ioclk(MXC_IOCLK0, 480000); /* IO1 clock at 480MHz */ - mx28_set_ioclk(MXC_IOCLK1, 480000); + mxs_set_ioclk(MXC_IOCLK1, 480000); /* SSP0 clock at 96MHz */ - mx28_set_sspclk(MXC_SSPCLK0, 96000, 0); + mxs_set_sspclk(MXC_SSPCLK0, 96000, 0); /* SSP2 clock at 160MHz */ - mx28_set_sspclk(MXC_SSPCLK2, 160000, 0); + mxs_set_sspclk(MXC_SSPCLK2, 160000, 0); #ifdef CONFIG_CMD_USB mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT); @@ -93,7 +93,7 @@ int board_mmc_init(bd_t *bis) /* Turn on the power to the card. */ gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0); - return mxsmmc_initialize(bis, 0, m28_mmc_wp); + return mxsmmc_initialize(bis, 0, m28_mmc_wp, NULL); } #endif diff --git a/board/esg/ima3-mx53/imximage.cfg b/board/esg/ima3-mx53/imximage.cfg index fa6b42d..fce7492 100644 --- a/board/esg/ima3-mx53/imximage.cfg +++ b/board/esg/ima3-mx53/imximage.cfg @@ -1,50 +1,52 @@ -# -# (C) Copyright 2012 -# Stefano Babic DENX Software Engineering sbabic@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# image version +/* + * (C) Copyright 2012 + * Stefano Babic DENX Software Engineering sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ +/* image version */ IMAGE_VERSION 2 -# Boot Device : one of -# spi, sd (the board has no nand neither onenand) - +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM nor -# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register - -# IOMUX for RAM only +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +/* IOMUX for RAM only */ DATA 4 0x53fa8554 0x300020 DATA 4 0x53fa8560 0x300020 DATA 4 0x53fa8594 0x300020 @@ -72,37 +74,47 @@ DATA 4 0x53fa86fc 0x0 DATA 4 0x53fa86f4 0x0 DATA 4 0x53fa8714 0x0 DATA 4 0x53fa8724 0x4000000 -# -# DDR RAM + +/* DDR RAM */ DATA 4 0x63fd9088 0x40404040 DATA 4 0x63fd9090 0x40404040 DATA 4 0x63fd907C 0x01420143 DATA 4 0x63fd9080 0x01450146 DATA 4 0x63fd9018 0x00111740 DATA 4 0x63fd9000 0x84190000 -# esdcfgX + +/* esdcfgX */ DATA 4 0x63fd900C 0x9f5152e3 DATA 4 0x63fd9010 0xb68e8a63 DATA 4 0x63fd9014 0x01ff00db -# Read/Write command delay + +/* Read/Write command delay */ DATA 4 0x63fd902c 0x000026d2 -# Out of reset delays + +/* Out of reset delays */ DATA 4 0x63fd9030 0x00ff0e21 -# ESDCTL ODT timing control + +/* ESDCTL ODT timing control */ DATA 4 0x63fd9008 0x12273030 -# ESDCTL power down control + +/* ESDCTL power down control */ DATA 4 0x63fd9004 0x0002002d -# Set registers in DDR memory chips + +/* Set registers in DDR memory chips */ DATA 4 0x63fd901c 0x00008032 DATA 4 0x63fd901c 0x00008033 DATA 4 0x63fd901c 0x00028031 DATA 4 0x63fd901c 0x052080b0 DATA 4 0x63fd901c 0x04008040 -# ESDCTL refresh control + +/* ESDCTL refresh control */ DATA 4 0x63fd9020 0x00005800 -# PHY ZQ HW control + +/* PHY ZQ HW control */ DATA 4 0x63fd9040 0x05380003 -# PHY ODT control + +/* PHY ODT control */ DATA 4 0x63fd9058 0x00022222 -# start DDR3 + +/* start DDR3 */ DATA 4 0x63fd901c 0x00000000 diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg index 62498ab..c86cd40 100644 --- a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg +++ b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg @@ -1,47 +1,51 @@ -# Copyright (C) 2011 Freescale Semiconductor, Inc. -# Jason Liu <r64343@freescale.com> -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# image version - +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Jason Liu <r64343@freescale.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ IMAGE_VERSION 2 -# Boot Device : one of -# spi, sd (the board has no nand neither onenand) - +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM sd -# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ DATA 4 0x020e05a8 0x00000030 DATA 4 0x020e05b0 0x00000030 DATA 4 0x020e0524 0x00000030 @@ -154,7 +158,7 @@ DATA 4 0x021b48b8 0x00000800 DATA 4 0x021b001c 0x00000000 DATA 4 0x021b0404 0x00011006 -# set the default clock gate to save power +/* set the default clock gate to save power */ DATA 4 0x020c4068 0x00C03F3F DATA 4 0x020c406c 0x0030FC03 DATA 4 0x020c4070 0x0FFFC000 @@ -163,8 +167,8 @@ DATA 4 0x020c4078 0x00FFF300 DATA 4 0x020c407c 0x0F0000C3 DATA 4 0x020c4080 0x000003FF -# enable AXI cache for VDOA/VPU/IPU +/* enable AXI cache for VDOA/VPU/IPU */ DATA 4 0x020e0010 0xF00000CF -# set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ DATA 4 0x020e0018 0x007F007F DATA 4 0x020e001c 0x007F007F diff --git a/board/isee/igep0030/Makefile b/board/freescale/mx23evk/Makefile index cbc03d4..7518d7b 100644 --- a/board/isee/igep0030/Makefile +++ b/board/freescale/mx23evk/Makefile @@ -1,5 +1,5 @@ # -# (C) Copyright 2000, 2001, 2002 +# (C) Copyright 2000-2006 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -25,7 +25,11 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := igep0030.o +ifndef CONFIG_SPL_BUILD +COBJS := mx23evk.o +else +COBJS := spl_boot.o +endif SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/freescale/mx23evk/mx23evk.c b/board/freescale/mx23evk/mx23evk.c new file mode 100644 index 0000000..41ba303 --- /dev/null +++ b/board/freescale/mx23evk/mx23evk.c @@ -0,0 +1,83 @@ +/* + * Freescale MX23EVK board + * + * (C) Copyright 2013 O.S. Systems Software LTDA. + * + * Author: Otavio Salvador <otavio@ossystems.com.br> + * + * Based on m28evk.c: + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/gpio.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/iomux-mx23.h> +#include <asm/arch/sys_proto.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Functions + */ +int board_early_init_f(void) +{ + /* IO0 clock at 480MHz */ + mxs_set_ioclk(MXC_IOCLK0, 480000); + + /* SSP0 clock at 96MHz */ + mxs_set_sspclk(MXC_SSPCLK0, 96000, 0); + + return 0; +} + +int dram_init(void) +{ + return mxs_dram_init(); +} + +int board_init(void) +{ + /* Adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} + +#ifdef CONFIG_CMD_MMC +static int mx23evk_mmc_wp(int id) +{ + if (id != 0) { + printf("MXS MMC: Invalid card selected (card id = %d)\n", id); + return 1; + } + + return gpio_get_value(MX23_PAD_PWM4__GPIO_1_30); +} + +int board_mmc_init(bd_t *bis) +{ + /* Configure WP as input */ + gpio_direction_input(MX23_PAD_PWM4__GPIO_1_30); + + /* Configure MMC0 Power Enable */ + gpio_direction_output(MX23_PAD_PWM3__GPIO_1_29, 0); + + return mxsmmc_initialize(bis, 0, mx23evk_mmc_wp, NULL); +} +#endif diff --git a/board/freescale/mx23evk/spl_boot.c b/board/freescale/mx23evk/spl_boot.c new file mode 100644 index 0000000..6007433 --- /dev/null +++ b/board/freescale/mx23evk/spl_boot.c @@ -0,0 +1,104 @@ +/* + * Freescale MX23EVK Boot setup + * + * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com> + * on behalf of DENX Software Engineering GmbH + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <config.h> +#include <asm/io.h> +#include <asm/arch/iomux-mx23.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> + +#define MUX_CONFIG_SSP1 (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP) +#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_16MA | MXS_PAD_PULLUP) + +const iomux_cfg_t iomux_setup[] = { + /* DUART */ + MX23_PAD_PWM0__DUART_RX, + MX23_PAD_PWM1__DUART_TX, + + /* EMI */ + MX23_PAD_EMI_D00__EMI_D00 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D01__EMI_D01 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D02__EMI_D02 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D03__EMI_D03 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D04__EMI_D04 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D05__EMI_D05 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D06__EMI_D06 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D07__EMI_D07 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D08__EMI_D08 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D09__EMI_D09 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D10__EMI_D10 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D11__EMI_D11 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D12__EMI_D12 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D13__EMI_D13 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D14__EMI_D14 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D15__EMI_D15 | MUX_CONFIG_EMI, + MX23_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI, + MX23_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI, + MX23_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI, + MX23_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI, + MX23_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI, + MX23_PAD_EMI_CLKN__EMI_CLKN | MUX_CONFIG_EMI, + + MX23_PAD_EMI_A00__EMI_A00 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A01__EMI_A01 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A02__EMI_A02 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A03__EMI_A03 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A04__EMI_A04 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A05__EMI_A05 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A06__EMI_A06 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A07__EMI_A07 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A08__EMI_A08 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A09__EMI_A09 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A10__EMI_A10 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A11__EMI_A11 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A12__EMI_A12 | MUX_CONFIG_EMI, + MX23_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI, + MX23_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI, + + MX23_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI, + MX23_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI, + MX23_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI, + MX23_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI, + MX23_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI, + MX23_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI, + + /* MMC 0 */ + MX23_PAD_SSP1_DATA0__SSP1_DATA0 | MUX_CONFIG_SSP1, + MX23_PAD_SSP1_DATA1__SSP1_DATA1 | MUX_CONFIG_SSP1, + MX23_PAD_SSP1_DATA2__SSP1_DATA2 | MUX_CONFIG_SSP1, + MX23_PAD_SSP1_DATA3__SSP1_DATA3 | MUX_CONFIG_SSP1, + MX23_PAD_SSP1_CMD__SSP1_CMD | MUX_CONFIG_SSP1, + MX23_PAD_SSP1_DETECT__SSP1_DETECT | MUX_CONFIG_SSP1, + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + MX23_PAD_SSP1_SCK__SSP1_SCK | + (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* Write Protect Pin */ + MX23_PAD_PWM4__GPIO_1_30 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + /* Slot Power Enable */ + MX23_PAD_PWM3__GPIO_1_29 | + (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), +}; + +void board_init_ll(void) +{ + mxs_common_spl_init(iomux_setup, ARRAY_SIZE(iomux_setup)); +} diff --git a/board/freescale/mx25pdk/imximage.cfg b/board/freescale/mx25pdk/imximage.cfg index f7af7ff..c42a283 100644 --- a/board/freescale/mx25pdk/imximage.cfg +++ b/board/freescale/mx25pdk/imximage.cfg @@ -1,46 +1,49 @@ -# -# (C) Copyright 2009 -# Stefano Babic DENX Software Engineering sbabic@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# Boot Device : one of -# spi, sd (the board has no nand neither onenand) +/* + * (C) Copyright 2009 + * Stefano Babic DENX Software Engineering sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM sd -# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register - -# EIM config-CS5 init -- CPLD +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +/* EIM config-CS5 init -- CPLD */ DATA 4 0xB8002050 0x0000D843 DATA 4 0xB8002054 0x22252521 DATA 4 0xB8002058 0x22220A00 -# DDR2 init +/* DDR2 init */ DATA 4 0xB8001004 0x0076E83A DATA 4 0xB8001010 0x00000204 DATA 4 0xB8001000 0x92210000 @@ -67,7 +70,7 @@ DATA 4 0x43FAC454 0x00001000 DATA 4 0x53F80008 0x20034000 -# Enable the clocks +/* Enable the clocks */ DATA 4 0x53f8000c 0x1fffffff DATA 4 0x53f80010 0xffffffff DATA 4 0x53f80014 0xfdfff diff --git a/board/freescale/mx28evk/mx28evk.c b/board/freescale/mx28evk/mx28evk.c index 6e719ff..de7231b 100644 --- a/board/freescale/mx28evk/mx28evk.c +++ b/board/freescale/mx28evk/mx28evk.c @@ -43,14 +43,14 @@ DECLARE_GLOBAL_DATA_PTR; int board_early_init_f(void) { /* IO0 clock at 480MHz */ - mx28_set_ioclk(MXC_IOCLK0, 480000); + mxs_set_ioclk(MXC_IOCLK0, 480000); /* IO1 clock at 480MHz */ - mx28_set_ioclk(MXC_IOCLK1, 480000); + mxs_set_ioclk(MXC_IOCLK1, 480000); /* SSP0 clock at 96MHz */ - mx28_set_sspclk(MXC_SSPCLK0, 96000, 0); + mxs_set_sspclk(MXC_SSPCLK0, 96000, 0); /* SSP2 clock at 160MHz */ - mx28_set_sspclk(MXC_SSPCLK2, 160000, 0); + mxs_set_sspclk(MXC_SSPCLK2, 160000, 0); #ifdef CONFIG_CMD_USB mxs_iomux_setup_pad(MX28_PAD_SSP2_SS1__USB1_OVERCURRENT); @@ -94,7 +94,7 @@ int board_mmc_init(bd_t *bis) /* Configure MMC0 Power Enable */ gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0); - return mxsmmc_initialize(bis, 0, mx28evk_mmc_wp); + return mxsmmc_initialize(bis, 0, mx28evk_mmc_wp, NULL); } #endif diff --git a/board/freescale/mx51evk/imximage.cfg b/board/freescale/mx51evk/imximage.cfg index a875e8f..3e141ee 100644 --- a/board/freescale/mx51evk/imximage.cfg +++ b/board/freescale/mx51evk/imximage.cfg @@ -1,46 +1,50 @@ -# -# (C Copyright 2009 -# Stefano Babic DENX Software Engineering sbabic@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# Boot Device : one of -# spi, sd (the board has no nand neither onenand) +/* + * (C Copyright 2009 + * Stefano Babic DENX Software Engineering sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM spi -# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ -# Setting IOMUXC +/* Setting IOMUXC */ DATA 4 0x73FA88a0 0x200 DATA 4 0x73FA850c 0x20c5 DATA 4 0x73FA8510 0x20c5 @@ -65,22 +69,24 @@ DATA 4 0x73FA88a4 0x6 DATA 4 0x73FA88ac 0x6 DATA 4 0x73FA88b8 0x6 -# Setting DDR for micron -# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model -# CAS=3 BL=4 -# ESDCTL_ESDCTL0 +/* + * Setting DDR for micron + * 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model + * CAS=3 BL=4 + */ +/* ESDCTL_ESDCTL0 */ DATA 4 0x83FD9000 0x82a20000 -# ESDCTL_ESDCTL1 +/* ESDCTL_ESDCTL1 */ DATA 4 0x83FD9008 0x82a20000 -# ESDCTL_ESDMISC +/* ESDCTL_ESDMISC */ DATA 4 0x83FD9010 0x000ad0d0 -# ESDCTL_ESDCFG0 +/* ESDCTL_ESDCFG0 */ DATA 4 0x83FD9004 0x333574aa -# ESDCTL_ESDCFG1 +/* ESDCTL_ESDCFG1 */ DATA 4 0x83FD900C 0x333574aa -# Init DRAM on CS0 -# ESDCTL_ESDSCR +/* Init DRAM on CS0 */ +/* ESDCTL_ESDSCR */ DATA 4 0x83FD9014 0x04008008 DATA 4 0x83FD9014 0x0000801a DATA 4 0x83FD9014 0x0000801b @@ -94,7 +100,7 @@ DATA 4 0x83FD9014 0x03808019 DATA 4 0x83FD9014 0x00408019 DATA 4 0x83FD9014 0x00008000 -# Init DRAM on CS1 +/* Init DRAM on CS1 */ DATA 4 0x83FD9014 0x0400800c DATA 4 0x83FD9014 0x0000801e DATA 4 0x83FD9014 0x0000801f @@ -108,12 +114,12 @@ DATA 4 0x83FD9014 0x0380801d DATA 4 0x83FD9014 0x0040801d DATA 4 0x83FD9014 0x00008004 -# Write to CTL0 +/* Write to CTL0 */ DATA 4 0x83FD9000 0xb2a20000 -# Write to CTL1 +/* Write to CTL1 */ DATA 4 0x83FD9008 0xb2a20000 -# ESDMISC +/* ESDMISC */ DATA 4 0x83FD9010 0x000ad6d0 -#ESDCTL_ESDCDLYGD +/* ESDCTL_ESDCDLYGD */ DATA 4 0x83FD9034 0x90000000 DATA 4 0x83FD9014 0x00000000 diff --git a/board/freescale/mx53ard/imximage_dd3.cfg b/board/freescale/mx53ard/imximage_dd3.cfg index 614d29e..4633e4d 100644 --- a/board/freescale/mx53ard/imximage_dd3.cfg +++ b/board/freescale/mx53ard/imximage_dd3.cfg @@ -1,48 +1,51 @@ -# -# (C) Copyright 2009 -# Stefano Babic DENX Software Engineering sbabic@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# image version +/* + * (C) Copyright 2009 + * Stefano Babic DENX Software Engineering sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ +/* image version */ IMAGE_VERSION 2 -# Boot Device : one of -# spi, sd (the board has no nand neither onenand) - +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM sd -# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ DATA 4 0x53fa8554 0x00300000 DATA 4 0x53fa8558 0x00300040 DATA 4 0x53fa8560 0x00300000 diff --git a/board/freescale/mx53evk/imximage.cfg b/board/freescale/mx53evk/imximage.cfg index 915fb2c..1cd61d5 100644 --- a/board/freescale/mx53evk/imximage.cfg +++ b/board/freescale/mx53evk/imximage.cfg @@ -1,50 +1,52 @@ -# -# (C Copyright 2009 -# Stefano Babic DENX Software Engineering sbabic@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# image version +/* + * (C Copyright 2009 + * Stefano Babic DENX Software Engineering sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ +/* image version */ IMAGE_VERSION 2 -# Boot Device : one of -# spi, sd (the board has no nand neither onenand) - +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM sd -# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register - -# Setting IOMUXC +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +/* Setting IOMUXC */ DATA 4 0x53fa8554 0x00200000 DATA 4 0x53fa8560 0x00200000 DATA 4 0x53fa8594 0x00200000 diff --git a/board/freescale/mx53loco/imximage.cfg b/board/freescale/mx53loco/imximage.cfg index 2ce5f8d..e6b90c1 100644 --- a/board/freescale/mx53loco/imximage.cfg +++ b/board/freescale/mx53loco/imximage.cfg @@ -1,48 +1,51 @@ -# Copyright (C) 2011 Freescale Semiconductor, Inc. -# Jason Liu <r64343@freescale.com> -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# image version +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Jason Liu <r64343@freescale.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ +/* image version */ IMAGE_VERSION 2 -# Boot Device : one of -# spi, sd (the board has no nand neither onenand) - +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM sd -# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register - +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ DATA 4 0x53fa8554 0x00300000 DATA 4 0x53fa8558 0x00300040 DATA 4 0x53fa8560 0x00300000 diff --git a/board/freescale/mx53smd/imximage.cfg b/board/freescale/mx53smd/imximage.cfg index 614d29e..4633e4d 100644 --- a/board/freescale/mx53smd/imximage.cfg +++ b/board/freescale/mx53smd/imximage.cfg @@ -1,48 +1,51 @@ -# -# (C) Copyright 2009 -# Stefano Babic DENX Software Engineering sbabic@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# image version +/* + * (C) Copyright 2009 + * Stefano Babic DENX Software Engineering sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ +/* image version */ IMAGE_VERSION 2 -# Boot Device : one of -# spi, sd (the board has no nand neither onenand) - +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM sd -# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ DATA 4 0x53fa8554 0x00300000 DATA 4 0x53fa8558 0x00300040 DATA 4 0x53fa8560 0x00300000 diff --git a/board/freescale/mx6qarm2/imximage.cfg b/board/freescale/mx6qarm2/imximage.cfg index bf941a3..4ed211e 100644 --- a/board/freescale/mx6qarm2/imximage.cfg +++ b/board/freescale/mx6qarm2/imximage.cfg @@ -1,47 +1,51 @@ -# Copyright (C) 2011 Freescale Semiconductor, Inc. -# Jason Liu <r64343@freescale.com> -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# image version - +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Jason Liu <r64343@freescale.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ IMAGE_VERSION 2 -# Boot Device : one of -# spi, sd (the board has no nand neither onenand) - +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM sd -# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ DATA 4 0x020e05a8 0x00000030 DATA 4 0x020e05b0 0x00000030 DATA 4 0x020e0524 0x00000030 @@ -166,8 +170,8 @@ DATA 4 0x020c4078 0x00FFF300 DATA 4 0x020c407c 0x0F0000C3 DATA 4 0x020c4080 0x000003FF -# enable AXI cache for VDOA/VPU/IPU +/* enable AXI cache for VDOA/VPU/IPU */ DATA 4 0x020e0010 0xF00000CF -# set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ DATA 4 0x020e0018 0x007F007F DATA 4 0x020e001c 0x007F007F diff --git a/board/freescale/mx6qsabreauto/imximage.cfg b/board/freescale/mx6qsabreauto/imximage.cfg index d909aa8..bbff813 100644 --- a/board/freescale/mx6qsabreauto/imximage.cfg +++ b/board/freescale/mx6qsabreauto/imximage.cfg @@ -1,46 +1,50 @@ -# Copyright (C) 2012 Freescale Semiconductor, Inc. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# image version +/* + * Copyright (C) 2012 Freescale Semiconductor, Inc. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ +/* image version */ IMAGE_VERSION 2 -# Boot Device : one of -# spi, sd (the board has no nand neither onenand) - +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM sd -# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ DATA 4 0x020e05a8 0x00000028 DATA 4 0x020e05b0 0x00000028 DATA 4 0x020e0524 0x00000028 @@ -126,7 +130,7 @@ DATA 4 0x021b0020 0x00005800 DATA 4 0x021b0818 0x00000007 DATA 4 0x021b4818 0x00000007 -# Calibration values based on ARD and 528MHz +/* Calibration values based on ARD and 528MHz */ DATA 4 0x021b083c 0x434B0358 DATA 4 0x021b0840 0x033D033C DATA 4 0x021b483c 0x03520362 diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c index af6f917..f010d0c 100644 --- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c +++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c @@ -33,6 +33,7 @@ #include <asm/imx-common/boot_mode.h> #include <mmc.h> #include <fsl_esdhc.h> +#include <malloc.h> #include <micrel.h> #include <miiphy.h> #include <netdev.h> @@ -338,14 +339,31 @@ int board_phy_config(struct phy_device *phydev) int board_eth_init(bd_t *bis) { + uint32_t base = IMX_FEC_BASE; + struct mii_dev *bus = NULL; + struct phy_device *phydev = NULL; int ret; setup_iomux_enet(); - ret = cpu_eth_init(bis); - if (ret) +#ifdef CONFIG_FEC_MXC + bus = fec_get_miibus(base, -1); + if (!bus) + return 0; + /* scan phy 4,5,6,7 */ + phydev = phy_find_by_mask(bus, (0xf << 4), PHY_INTERFACE_MODE_RGMII); + if (!phydev) { + free(bus); + return 0; + } + printf("using phy at %d\n", phydev->addr); + ret = fec_probe(bis, -1, base, bus, phydev); + if (ret) { printf("FEC MXC: %s:failed\n", __func__); - + free(phydev); + free(bus); + } +#endif return 0; } diff --git a/board/genesi/mx51_efikamx/imximage_mx.cfg b/board/genesi/mx51_efikamx/imximage_mx.cfg index 38fa760..21ff6d6 100644 --- a/board/genesi/mx51_efikamx/imximage_mx.cfg +++ b/board/genesi/mx51_efikamx/imximage_mx.cfg @@ -1,52 +1,58 @@ -# -# Copyright (C) 2009 Pegatron Corporation -# Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> -# Copyright (C) 2009-2012 Genesi USA, Inc. -# -# BASED ON: imx51evk -# -# (C) Copyright 2009 -# Stefano Babic DENX Software Engineering sbabic@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage +/* + * Copyright (C) 2009 Pegatron Corporation + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + * Copyright (C) 2009-2012 Genesi USA, Inc. + * + * BASED ON: imx51evk + * + * (C) Copyright 2009 + * Stefano Babic DENX Software Engineering sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ -# Boot Device : one of -# spi, sd (the board has no nand neither onenand) +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM spi -# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register - -# Essential GPIO settings to be done as early as possible -# PCBIDn pad settings are all the defaults except #2 which needs HVE off +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +/* + * Essential GPIO settings to be done as early as possible + * PCBIDn pad settings are all the defaults except #2 which needs HVE off + */ DATA 4 0x73fa8134 0x3 # PCBID0 ALT3 GPIO 3_16 DATA 4 0x73fa8130 0x3 # PCBID1 ALT3 GPIO 3_17 DATA 4 0x73fa8128 0x3 # PCBID2 ALT3 GPIO 3_11 @@ -55,7 +61,7 @@ DATA 4 0x73fa8198 0x3 # LED0 ALT3 GPIO 3_13 DATA 4 0x73fa81c4 0x3 # LED1 ALT3 GPIO 3_14 DATA 4 0x73fa81c8 0x3 # LED2 ALT3 GPIO 3_15 -# DDR bus IOMUX PAD settings +/* DDR bus IOMUX PAD settings */ DATA 4 0x73fa850c 0x20c5 # SDODT1 DATA 4 0x73fa8510 0x20c5 # SDODT0 DATA 4 0x73fa84ac 0xc5 # SDWE @@ -72,22 +78,24 @@ DATA 4 0x73fa84d8 0xc5 # DRAM_DQM1 DATA 4 0x73fa84dc 0xc5 # DRAM_DQM2 DATA 4 0x73fa84e0 0xc5 # DRAM_DQM3 -# Setting DDR for micron -# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model -# CAS=3 BL=4 -# ESDCTL_ESDCTL0 +/* + * Setting DDR for micron + * 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model + * CAS=3 BL=4 + */ +/* ESDCTL_ESDCTL0 */ DATA 4 0x83fd9000 0x82a20000 -# ESDCTL_ESDCTL1 +/* ESDCTL_ESDCTL1 */ DATA 4 0x83fd9008 0x82a20000 -# ESDCTL_ESDMISC +/* ESDCTL_ESDMISC */ DATA 4 0x83fd9010 0xcaaaf6d0 -# ESDCTL_ESDCFG0 +/* ESDCTL_ESDCFG0 */ DATA 4 0x83fd9004 0x3f3574aa -# ESDCTL_ESDCFG1 +/* ESDCTL_ESDCFG1 */ DATA 4 0x83fd900c 0x3f3574aa -# Init DRAM on CS0 -# ESDCTL_ESDSCR +/* Init DRAM on CS0 */ +/* ESDCTL_ESDSCR */ DATA 4 0x83fd9014 0x04008008 DATA 4 0x83fd9014 0x0000801a DATA 4 0x83fd9014 0x0000801b @@ -101,7 +109,7 @@ DATA 4 0x83fd9014 0x03808019 DATA 4 0x83fd9014 0x00408019 DATA 4 0x83fd9014 0x00008000 -# Init DRAM on CS1 +/* Init DRAM on CS1 */ DATA 4 0x83fd9014 0x0400800c DATA 4 0x83fd9014 0x0000801e DATA 4 0x83fd9014 0x0000801f @@ -115,12 +123,12 @@ DATA 4 0x83fd9014 0x0380801d DATA 4 0x83fd9014 0x0040801d DATA 4 0x83fd9014 0x00008004 -# Write to CTL0 +/* Write to CTL0 */ DATA 4 0x83fd9000 0xb2a20000 -# Write to CTL1 +/* Write to CTL1 */ DATA 4 0x83fd9008 0xb2a20000 -# ESDMISC +/* ESDMISC */ DATA 4 0x83fd9010 0x000ad6d0 -#ESDCTL_ESDCDLYGD +/* ESDCTL_ESDCDLYGD */ DATA 4 0x83fd9034 0x90000000 DATA 4 0x83fd9014 0x00000000 diff --git a/board/genesi/mx51_efikamx/imximage_sb.cfg b/board/genesi/mx51_efikamx/imximage_sb.cfg index 26d259f..7ddd0b1 100644 --- a/board/genesi/mx51_efikamx/imximage_sb.cfg +++ b/board/genesi/mx51_efikamx/imximage_sb.cfg @@ -1,51 +1,55 @@ -# -# Copyright (C) 2009 Pegatron Corporation -# Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> -# Copyright (C) 2009-2012 Genesi USA, Inc. -# -# BASED ON: imx51evk -# -# (C) Copyright 2009 -# Stefano Babic DENX Software Engineering sbabic@denx.de. -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage +/* + * Copyright (C) 2009 Pegatron Corporation + * Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com> + * Copyright (C) 2009-2012 Genesi USA, Inc. + * + * BASED ON: imx51evk + * + * (C) Copyright 2009 + * Stefano Babic DENX Software Engineering sbabic@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ -# Boot Device : one of -# spi, sd (the board has no nand neither onenand) +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ BOOT_FROM spi -# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register - -# DDR bus IOMUX PAD settings +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register +*/ +/* DDR bus IOMUX PAD settings */ DATA 4 0x73fa88a0 0x200 # GRP_INMODE1 DATA 4 0x73fa850c 0x20c5 # SDODT1 DATA 4 0x73fa8510 0x20c5 # SDODT0 @@ -62,22 +66,24 @@ DATA 4 0x73fa84b4 0xe5 # SDCKE1 DATA 4 0x73fa84cc 0xe5 # DRAM_CS0 DATA 4 0x73fa84d0 0xe4 # DRAM_CS1 -# Setting DDR for micron -# 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model -# CAS=3 BL=4 -# ESDCTL_ESDCTL0 +/* + * Setting DDR for micron + * 13 Rows, 10 Cols, 32 bit, SREF=4 Micron Model + * CAS=3 BL=4 + */ +/* ESDCTL_ESDCTL0 */ DATA 4 0x83fd9000 0x82a20000 -# ESDCTL_ESDCTL1 +/* ESDCTL_ESDCTL1 */ DATA 4 0x83fd9008 0x82a20000 -# ESDCTL_ESDMISC +/* ESDCTL_ESDMISC */ DATA 4 0x83fd9010 0xcaaaf6d0 -# ESDCTL_ESDCFG0 +/* ESDCTL_ESDCFG0 */ DATA 4 0x83fd9004 0x333574aa -# ESDCTL_ESDCFG1 +/* ESDCTL_ESDCFG1 */ DATA 4 0x83fd900c 0x333574aa -# Init DRAM on CS0 -# ESDCTL_ESDSCR +/* Init DRAM on CS0 */ +/* ESDCTL_ESDSCR */ DATA 4 0x83fd9014 0x04008008 DATA 4 0x83fd9014 0x0000801a DATA 4 0x83fd9014 0x0000801b @@ -91,7 +97,7 @@ DATA 4 0x83fd9014 0x03808019 DATA 4 0x83fd9014 0x00408019 DATA 4 0x83fd9014 0x00008000 -# Init DRAM on CS1 +/* Init DRAM on CS1 */ DATA 4 0x83fd9014 0x0400800c DATA 4 0x83fd9014 0x0000801e DATA 4 0x83fd9014 0x0000801f @@ -105,12 +111,12 @@ DATA 4 0x83fd9014 0x0380801d DATA 4 0x83fd9014 0x0042801d DATA 4 0x83fd9014 0x00008004 -# Write to CTL0 +/* Write to CTL0 */ DATA 4 0x83fd9000 0xb2a20000 -# Write to CTL1 +/* Write to CTL1 */ DATA 4 0x83fd9008 0xb2a20000 -# ESDMISC +/* ESDMISC */ DATA 4 0x83fd9010 0xcaaaf6d0 -#ESDCTL_ESDCDLYGD +/* ESDCTL_ESDCDLYGD */ DATA 4 0x83fd9034 0x90000000 DATA 4 0x83fd9014 0x00000000 diff --git a/board/highbank/highbank.c b/board/highbank/highbank.c index f41bf05..09cd45d 100644 --- a/board/highbank/highbank.c +++ b/board/highbank/highbank.c @@ -88,5 +88,6 @@ void dram_init_banksize(void) void reset_cpu(ulong addr) { writel(HB_PWR_HARD_RESET, HB_SREG_A9_PWR_REQ); - asm(" wfi"); + + wfi(); } diff --git a/board/isee/igep0020/igep0020.h b/board/isee/igep0020/igep0020.h deleted file mode 100644 index 3335ecc..0000000 --- a/board/isee/igep0020/igep0020.h +++ /dev/null @@ -1,151 +0,0 @@ -/* - * (C) Copyright 2010 - * ISEE 2007 SL, <www.iseebcn.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#ifndef _IGEP0020_H_ -#define _IGEP0020_H_ - -const omap3_sysinfo sysinfo = { - DDR_STACKED, - "IGEP v2 board", -#if defined(CONFIG_ENV_IS_IN_ONENAND) - "ONENAND", -#else - "NAND", -#endif -}; - -static void setup_net_chip(void); - -/* - * IEN - Input Enable - * IDIS - Input Disable - * PTD - Pull type Down - * PTU - Pull type Up - * DIS - Pull type selection is inactive - * EN - Pull type selection is active - * M0 - Mode 0 - * The commented string gives the final mux configuration for that pin - */ -#define MUX_DEFAULT()\ - MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /* SDRC_D0 */\ - MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /* SDRC_D1 */\ - MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0)) /* SDRC_D2 */\ - MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0)) /* SDRC_D3 */\ - MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0)) /* SDRC_D4 */\ - MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0)) /* SDRC_D5 */\ - MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0)) /* SDRC_D6 */\ - MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0)) /* SDRC_D7 */\ - MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0)) /* SDRC_D8 */\ - MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0)) /* SDRC_D9 */\ - MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0)) /* SDRC_D10 */\ - MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0)) /* SDRC_D11 */\ - MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0)) /* SDRC_D12 */\ - MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0)) /* SDRC_D13 */\ - MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0)) /* SDRC_D14 */\ - MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0)) /* SDRC_D15 */\ - MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0)) /* SDRC_D16 */\ - MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0)) /* SDRC_D17 */\ - MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0)) /* SDRC_D18 */\ - MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0)) /* SDRC_D19 */\ - MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0)) /* SDRC_D20 */\ - MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0)) /* SDRC_D21 */\ - MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0)) /* SDRC_D22 */\ - MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0)) /* SDRC_D23 */\ - MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0)) /* SDRC_D24 */\ - MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0)) /* SDRC_D25 */\ - MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0)) /* SDRC_D26 */\ - MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0)) /* SDRC_D27 */\ - MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0)) /* SDRC_D28 */\ - MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0)) /* SDRC_D29 */\ - MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0)) /* SDRC_D30 */\ - MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0)) /* SDRC_D31 */\ - MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0)) /* SDRC_CLK */\ - MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0)) /* SDRC_DQS0 */\ - MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0)) /* SDRC_DQS1 */\ - MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0)) /* SDRC_DQS2 */\ - MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0)) /* SDRC_DQS3 */\ - MUX_VAL(CP(GPMC_A1), (IDIS | PTD | DIS | M0)) /* GPMC_A1 */\ - MUX_VAL(CP(GPMC_A2), (IDIS | PTD | DIS | M0)) /* GPMC_A2 */\ - MUX_VAL(CP(GPMC_A3), (IDIS | PTD | DIS | M0)) /* GPMC_A3 */\ - MUX_VAL(CP(GPMC_A4), (IDIS | PTD | DIS | M0)) /* GPMC_A4 */\ - MUX_VAL(CP(GPMC_A5), (IDIS | PTD | DIS | M0)) /* GPMC_A5 */\ - MUX_VAL(CP(GPMC_A6), (IDIS | PTD | DIS | M0)) /* GPMC_A6 */\ - MUX_VAL(CP(GPMC_A7), (IDIS | PTD | DIS | M0)) /* GPMC_A7 */\ - MUX_VAL(CP(GPMC_A8), (IDIS | PTD | DIS | M0)) /* GPMC_A8 */\ - MUX_VAL(CP(GPMC_A9), (IDIS | PTD | DIS | M0)) /* GPMC_A9 */\ - MUX_VAL(CP(GPMC_A10), (IDIS | PTD | DIS | M0)) /* GPMC_A10 */\ - MUX_VAL(CP(GPMC_D0), (IEN | PTD | DIS | M0)) /* GPMC_D0 */\ - MUX_VAL(CP(GPMC_D1), (IEN | PTD | DIS | M0)) /* GPMC_D1 */\ - MUX_VAL(CP(GPMC_D2), (IEN | PTD | DIS | M0)) /* GPMC_D2 */\ - MUX_VAL(CP(GPMC_D3), (IEN | PTD | DIS | M0)) /* GPMC_D3 */\ - MUX_VAL(CP(GPMC_D4), (IEN | PTD | DIS | M0)) /* GPMC_D4 */\ - MUX_VAL(CP(GPMC_D5), (IEN | PTD | DIS | M0)) /* GPMC_D5 */\ - MUX_VAL(CP(GPMC_D6), (IEN | PTD | DIS | M0)) /* GPMC_D6 */\ - MUX_VAL(CP(GPMC_D7), (IEN | PTD | DIS | M0)) /* GPMC_D7 */\ - MUX_VAL(CP(GPMC_D8), (IEN | PTD | DIS | M0)) /* GPMC_D8 */\ - MUX_VAL(CP(GPMC_D9), (IEN | PTD | DIS | M0)) /* GPMC_D9 */\ - MUX_VAL(CP(GPMC_D10), (IEN | PTD | DIS | M0)) /* GPMC_D10 */\ - MUX_VAL(CP(GPMC_D11), (IEN | PTD | DIS | M0)) /* GPMC_D11 */\ - MUX_VAL(CP(GPMC_D12), (IEN | PTD | DIS | M0)) /* GPMC_D12 */\ - MUX_VAL(CP(GPMC_D13), (IEN | PTD | DIS | M0)) /* GPMC_D13 */\ - MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /* GPMC_D14 */\ - MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /* GPMC_D15 */\ - MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /* GPMC_nCS0 */\ - MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /* GPMC_nCS1 */\ - MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M0)) /* GPIO_nCS2 */\ - MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M0)) /* GPIO_nCS3 */\ - MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M0)) /* GPMC_nCS4 */\ - MUX_VAL(CP(GPMC_NCS5), (IDIS | PTU | EN | M0)) /* GPMC_nCS5 */\ - MUX_VAL(CP(GPMC_NCS6), (IDIS | PTU | EN | M0)) /* GPMC_nCS6 */\ - MUX_VAL(CP(GPMC_NCS7), (IDIS | PTU | EN | M0)) /* GPMC_nCS7 */\ - MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /* GPMC_CLK */\ - MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /* GPMC_nADV_ALE */\ - MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /* GPMC_nOE */\ - MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /* GPMC_nWE */\ - MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /* GPMC_nBE0_CLE */\ - MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /* GPMC_nBE1 */\ - MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /* GPMC_nWP */\ - MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /* GPMC_WAIT0 */\ - MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | DIS | M4)) /* GPIO_64-ETH_NRST */\ - MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0)) /* MMC1_CLK */\ - MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0)) /* MMC1_CMD */\ - MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0)) /* MMC1_DAT0 */\ - MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /* MMC1_DAT1 */\ - MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /* MMC1_DAT2 */\ - MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /* MMC1_DAT3 */\ - MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /* UART3_TX */\ - MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /* UART3_RX */\ - MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /* I2C1_SCL */\ - MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)) /* I2C1_SDA */\ - MUX_VAL(CP(I2C4_SCL), (IEN | PTU | EN | M0)) /* I2C4_SCL */\ - MUX_VAL(CP(I2C4_SDA), (IEN | PTU | EN | M0)) /* I2C4_SDA */\ - MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)) /* SYS_32K */\ - MUX_VAL(CP(SYS_BOOT0), (IEN | PTD | DIS | M4)) /* GPIO_2 */\ - MUX_VAL(CP(SYS_BOOT1), (IEN | PTD | DIS | M4)) /* GPIO_3 */\ - MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /* GPIO_4 */\ - MUX_VAL(CP(SYS_BOOT3), (IEN | PTD | DIS | M4)) /* GPIO_5 */\ - MUX_VAL(CP(SYS_BOOT4), (IEN | PTD | DIS | M4)) /* GPIO_6 */\ - MUX_VAL(CP(SYS_BOOT5), (IEN | PTD | DIS | M4)) /* GPIO_7 */\ - MUX_VAL(CP(SYS_BOOT6), (IEN | PTD | DIS | M4)) /* GPIO_8 */\ - MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /* SDRC_CKE0 */\ - MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /* SDRC_CKE1 */ -#endif diff --git a/board/isee/igep0030/igep0030.c b/board/isee/igep0030/igep0030.c deleted file mode 100644 index a41e752..0000000 --- a/board/isee/igep0030/igep0030.c +++ /dev/null @@ -1,117 +0,0 @@ -/* - * (C) Copyright 2010 - * ISEE 2007 SL, <www.iseebcn.com> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ -#include <common.h> -#include <twl4030.h> -#include <asm/io.h> -#include <asm/arch/mem.h> -#include <asm/arch/mmc_host_def.h> -#include <asm/arch/mux.h> -#include <asm/arch/sys_proto.h> -#include <asm/mach-types.h> -#include "igep0030.h" - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Routine: board_init - * Description: Early hardware init. - */ -int board_init(void) -{ - gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ - /* boot param addr */ - gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100); - - return 0; -} - -#ifdef CONFIG_SPL_BUILD -/* - * Routine: omap_rev_string - * Description: For SPL builds output board rev - */ -void omap_rev_string(void) -{ -} - -/* - * Routine: get_board_mem_timings - * Description: If we use SPL then there is no x-loader nor config header - * so we have to setup the DDR timings ourself on both banks. - */ -void get_board_mem_timings(struct board_sdrc_timings *timings) -{ - timings->mr = MICRON_V_MR_165; -#ifdef CONFIG_BOOT_NAND - timings->mcfg = MICRON_V_MCFG_200(256 << 20); - timings->ctrla = MICRON_V_ACTIMA_200; - timings->ctrlb = MICRON_V_ACTIMB_200; - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; -#else - if (get_cpu_family() == CPU_OMAP34XX) { - timings->mcfg = NUMONYX_V_MCFG_165(256 << 20); - timings->ctrla = NUMONYX_V_ACTIMA_165; - timings->ctrlb = NUMONYX_V_ACTIMB_165; - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz; - - } else { - timings->mcfg = NUMONYX_V_MCFG_200(256 << 20); - timings->ctrla = NUMONYX_V_ACTIMA_200; - timings->ctrlb = NUMONYX_V_ACTIMB_200; - timings->rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_200MHz; - } -#endif -} -#endif - -#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) -int board_mmc_init(bd_t *bis) -{ - omap_mmc_init(0, 0, 0); - return 0; -} -#endif - -/* - * Routine: misc_init_r - * Description: Configure board specific parts - */ -int misc_init_r(void) -{ - twl4030_power_init(); - - dieid_num_r(); - - return 0; -} - -/* - * Routine: set_muxconf_regs - * Description: Setting up the configuration Mux registers specific to the - * hardware. Many pins need to be moved from protect to primary - * mode. - */ -void set_muxconf_regs(void) -{ - MUX_DEFAULT(); -} diff --git a/board/isee/igep0020/Makefile b/board/isee/igep00x0/Makefile index 00463e1..f595954 100644 --- a/board/isee/igep0020/Makefile +++ b/board/isee/igep00x0/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := igep0020.o +COBJS := igep00x0.o SRCS := $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/isee/igep0020/igep0020.c b/board/isee/igep00x0/igep00x0.c index a0f2aa3..49fcf34 100644 --- a/board/isee/igep0020/igep0020.c +++ b/board/isee/igep00x0/igep00x0.c @@ -21,29 +21,31 @@ * MA 02111-1307 USA */ #include <common.h> -#include <netdev.h> #include <twl4030.h> -#include <asm/io.h> +#include <netdev.h> #include <asm/gpio.h> +#include <asm/arch/omap_gpmc.h> +#include <asm/io.h> #include <asm/arch/mem.h> #include <asm/arch/mmc_host_def.h> #include <asm/arch/mux.h> #include <asm/arch/sys_proto.h> -#include <asm/arch/omap_gpmc.h> #include <asm/mach-types.h> -#include "igep0020.h" +#include "igep00x0.h" DECLARE_GLOBAL_DATA_PTR; +#if defined(CONFIG_CMD_NET) /* GPMC definitions for LAN9221 chips */ static const u32 gpmc_lan_config[] = { - NET_LAN9221_GPMC_CONFIG1, - NET_LAN9221_GPMC_CONFIG2, - NET_LAN9221_GPMC_CONFIG3, - NET_LAN9221_GPMC_CONFIG4, - NET_LAN9221_GPMC_CONFIG5, - NET_LAN9221_GPMC_CONFIG6, + NET_LAN9221_GPMC_CONFIG1, + NET_LAN9221_GPMC_CONFIG2, + NET_LAN9221_GPMC_CONFIG3, + NET_LAN9221_GPMC_CONFIG4, + NET_LAN9221_GPMC_CONFIG5, + NET_LAN9221_GPMC_CONFIG6, }; +#endif /* * Routine: board_init @@ -58,6 +60,19 @@ int board_init(void) return 0; } +#if defined(CONFIG_SHOW_BOOT_PROGRESS) && !defined(CONFIG_SPL_BUILD) +void show_boot_progress(int val) +{ + if (val < 0) { + /* something went wrong */ + return; + } + + if (!gpio_request(IGEP00X0_GPIO_LED, "")) + gpio_direction_output(IGEP00X0_GPIO_LED, 1); +} +#endif + #ifdef CONFIG_SPL_BUILD /* * Routine: omap_rev_string @@ -97,12 +112,12 @@ void get_board_mem_timings(struct board_sdrc_timings *timings) } #endif +#if defined(CONFIG_CMD_NET) /* * Routine: setup_net_chip * Description: Setting up the configuration GPMC registers specific to the * Ethernet hardware. */ -#if defined(CONFIG_CMD_NET) static void setup_net_chip(void) { struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE; @@ -128,6 +143,8 @@ static void setup_net_chip(void) gpio_set_value(64, 1); } } +#else +static inline void setup_net_chip(void) {} #endif #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD) @@ -146,9 +163,7 @@ int misc_init_r(void) { twl4030_power_init(); -#if defined(CONFIG_CMD_NET) setup_net_chip(); -#endif dieid_num_r(); @@ -164,8 +179,17 @@ int misc_init_r(void) void set_muxconf_regs(void) { MUX_DEFAULT(); + +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) + MUX_IGEP0020(); +#endif + +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) + MUX_IGEP0030(); +#endif } +#if defined(CONFIG_CMD_NET) int board_eth_init(bd_t *bis) { int rc = 0; @@ -174,3 +198,4 @@ int board_eth_init(bd_t *bis) #endif return rc; } +#endif diff --git a/board/isee/igep0030/igep0030.h b/board/isee/igep00x0/igep00x0.h index a93339d..ea1e9ac 100644 --- a/board/isee/igep0030/igep0030.h +++ b/board/isee/igep00x0/igep00x0.h @@ -20,12 +20,25 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ -#ifndef _IGEP0030_H_ -#define _IGEP0030_H_ +#ifndef _IGEP00X0_H_ +#define _IGEP00X0_H_ + +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) +#define IGEP00X0_GPIO_LED 27 +#endif + +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) +#define IGEP00X0_GPIO_LED 16 +#endif const omap3_sysinfo sysinfo = { DDR_STACKED, - "OMAP3 IGEP module", +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) + "OMAP3 IGEP v2 board", +#endif +#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030) + "OMAP3 IGEP COM Module", +#endif #if defined(CONFIG_ENV_IS_IN_ONENAND) "ONENAND", #else @@ -33,6 +46,8 @@ const omap3_sysinfo sysinfo = { #endif }; +static void setup_net_chip(void); + /* * IEN - Input Enable * IDIS - Input Disable @@ -43,7 +58,6 @@ const omap3_sysinfo sysinfo = { * M0 - Mode 0 * The commented string gives the final mux configuration for that pin */ - #define MUX_DEFAULT()\ MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0)) /* SDRC_D0 */\ MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0)) /* SDRC_D1 */\ @@ -117,10 +131,10 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(GPMC_NCS6), (IDIS | PTU | EN | M0)) /* GPMC_nCS6 */\ MUX_VAL(CP(GPMC_NCS7), (IDIS | PTU | EN | M0)) /* GPMC_nCS7 */\ MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /* GPMC_CLK */\ - MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /* GPMC_nADV_ALE*/\ + MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /* GPMC_nADV_ALE */\ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /* GPMC_nOE */\ MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0)) /* GPMC_nWE */\ - MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /* GPMC_nBE0_CLE*/\ + MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTD | DIS | M0)) /* GPMC_nBE0_CLE */\ MUX_VAL(CP(GPMC_NBE1), (IEN | PTD | DIS | M0)) /* GPMC_nBE1 */\ MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0)) /* GPMC_nWP */\ MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0)) /* GPMC_WAIT0 */\ @@ -130,8 +144,6 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0)) /* MMC1_DAT1 */\ MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0)) /* MMC1_DAT2 */\ MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0)) /* MMC1_DAT3 */\ - MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /* UART1_TX */\ - MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /* UART1_RX */\ MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0)) /* UART3_TX */\ MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0)) /* UART3_RX */\ MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)) /* I2C1_SCL */\ @@ -149,3 +161,10 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /* SDRC_CKE0 */\ MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /* SDRC_CKE1 */ #endif + +#define MUX_IGEP0020() \ + MUX_VAL(CP(GPMC_WAIT2), (IEN | PTU | DIS | M4)) /* GPIO_64-ETH_NRST */\ + +#define MUX_IGEP0030() \ + MUX_VAL(CP(UART1_TX), (IDIS | PTD | DIS | M0)) /* UART1_TX */\ + MUX_VAL(CP(UART1_RX), (IEN | PTD | DIS | M0)) /* UART1_RX */ diff --git a/board/kmc/kzm9g/kzm9g.c b/board/kmc/kzm9g/kzm9g.c index 54f25e0..0d895c2 100644 --- a/board/kmc/kzm9g/kzm9g.c +++ b/board/kmc/kzm9g/kzm9g.c @@ -84,7 +84,7 @@ static void sbsc_init(struct sh73a0_sbsc *sbsc) writel(0x0017040a, &sbsc->sdwcr01); writel(0x31020707, &sbsc->sdwcr10); writel(0x0017040a, &sbsc->sdwcr11); - writel(0x05555555, &sbsc->sddrvcr0); + writel(0x055557ff, &sbsc->sddrvcr0); /* Enlarge drivability of LPDQS0-3, LPCLK */ writel(0x30000000, &sbsc->sdwcr2); writel(readl(&sbsc->sdpcr) | 0x80, &sbsc->sdpcr); @@ -112,7 +112,7 @@ static void sbsc_init(struct sh73a0_sbsc *sbsc) writel(0x0, SDMRA1A); writel(0x00000402, &sbsc->sdmracr0); writel(0x0, SDMRA1A); - writel(0x00000403, &sbsc->sdmracr0); + writel(0x00000203, &sbsc->sdmracr0); /* MR3 register DS=2 */ writel(0x0, SDMRA1A); writel(0x0, SDMRA2A); } else { @@ -120,7 +120,7 @@ static void sbsc_init(struct sh73a0_sbsc *sbsc) writel(0x0, SDMRA1B); writel(0x00000402, &sbsc->sdmracr0); writel(0x0, SDMRA1B); - writel(0x00000403, &sbsc->sdmracr0); + writel(0x00000203, &sbsc->sdmracr0); /* MR3 register DS=2 */ writel(0x0, SDMRA1B); writel(0x0, SDMRA2B); } @@ -195,7 +195,7 @@ void s_init(void) /* FRQCR Init */ writel(0x0012453C, &cpg->frqcra); - writel(0x80331350, &cpg->frqcrb); + writel(0x80431350, &cpg->frqcrb); /* ETM TRCLK 78MHz */ cmp_loop(&cpg->frqcrb, 0x80000000, 0x0); writel(0x00000B0B, &cpg->frqcrd); cmp_loop(&cpg->frqcrd, 0x80000000, 0x0); @@ -301,8 +301,19 @@ int board_early_init_f(void) return 0; } +void adjust_core_voltage(void) +{ + u8 data; + + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + data = 0x35; + i2c_set_bus_num(0); + i2c_write(0x40, 3, 1, &data, 1); +} + int board_init(void) { + adjust_core_voltage(); sh73a0_pinmux_init(); /* SCIFA 4 */ diff --git a/board/nvidia/cardhu/Makefile b/board/nvidia/cardhu/Makefile new file mode 100644 index 0000000..913f1ce --- /dev/null +++ b/board/nvidia/cardhu/Makefile @@ -0,0 +1,44 @@ +# +# (C) Copyright 2010-2012 +# NVIDIA Corporation <www.nvidia.com> +# +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := $(BOARD).o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/nvidia/cardhu/cardhu.c b/board/nvidia/cardhu/cardhu.c new file mode 100644 index 0000000..df4cb6b --- /dev/null +++ b/board/nvidia/cardhu/cardhu.c @@ -0,0 +1,39 @@ +/* + * (C) Copyright 2010-2012 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/pinmux.h> +#include "pinmux-config-cardhu.h" + +/* + * Routine: pinmux_init + * Description: Do individual peripheral pinmux configs + */ +void pinmux_init(void) +{ + pinmux_config_table(tegra3_pinmux_common, + ARRAY_SIZE(tegra3_pinmux_common)); + + pinmux_config_table(unused_pins_lowpower, + ARRAY_SIZE(unused_pins_lowpower)); +} diff --git a/board/nvidia/cardhu/cardhu.c.mmc b/board/nvidia/cardhu/cardhu.c.mmc new file mode 100644 index 0000000..9e83b6f --- /dev/null +++ b/board/nvidia/cardhu/cardhu.c.mmc @@ -0,0 +1,151 @@ +/* + * (C) Copyright 2010-2012 + * NVIDIA Corporation <www.nvidia.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/pinmux.h> +#include "pinmux-config-cardhu.h" + +#include <asm/arch/clock.h> +#include <asm/arch/gp_padctrl.h> +#include <asm/arch/pmu.h> +#include <asm/arch/sdmmc.h> +#include <asm/arch-tegra/mmc.h> +#include <asm/arch-tegra/tegra_mmc.h> +#include <mmc.h> +#include <i2c.h> + +/* + * Routine: pinmux_init + * Description: Do individual peripheral pinmux configs + */ +void pinmux_init(void) +{ + pinmux_config_table(tegra3_pinmux_common, + ARRAY_SIZE(tegra3_pinmux_common)); + + pinmux_config_table(unused_pins_lowpower, + ARRAY_SIZE(unused_pins_lowpower)); +} + +#if defined(CONFIG_MMC) +/* + * Routine: pin_mux_mmc + * Description: setup the pin muxes/tristate values for the SDMMC(s) + */ +static void pin_mux_mmc(void) +{ +} + +/* Do I2C/PMU writes to bring up SD card bus power */ +static void board_sdmmc_voltage_init(void) +{ + uchar reg, data_buffer[1]; + int i; + + i2c_set_bus_num(0); /* PMU is on bus 0 */ + + data_buffer[0] = 0x65; + reg = 0x32; + + for (i = 0; i < MAX_I2C_RETRY; ++i) { + if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1)) + udelay(100); + } + + data_buffer[0] = 0x09; + reg = 0x67; + + for (i = 0; i < MAX_I2C_RETRY; ++i) { + if (i2c_write(PMU_I2C_ADDRESS, reg, 1, data_buffer, 1)) + udelay(100); + } +} + +static void pad_init_mmc(struct tegra_mmc *reg) +{ + struct apb_misc_gp_ctlr *const gpc = + (struct apb_misc_gp_ctlr *)NV_PA_APB_MISC_GP_BASE; + struct sdmmc_ctlr *const sdmmc = (struct sdmmc_ctlr *)reg; + u32 val, offset = (unsigned int)reg; + u32 padcfg, padmask; + + debug("%s: sdmmc address = %08x\n", __func__, (unsigned int)sdmmc); + + /* Set the pad drive strength for SDMMC1 or 3 only */ + if (offset != TEGRA_SDMMC1_BASE && offset != TEGRA_SDMMC3_BASE) { + debug("%s: settings are only valid for SDMMC1/SDMMC3!\n", + __func__); + return; + } + + /* Set pads as per T30 TRM, section 24.6.1.2 */ + padcfg = (GP_SDIOCFG_DRVUP_SLWF | GP_SDIOCFG_DRVDN_SLWR | \ + GP_SDIOCFG_DRVUP | GP_SDIOCFG_DRVDN); + padmask = 0x00000FFF; + if (offset == TEGRA_SDMMC1_BASE) { + val = readl(&gpc->sdio1cfg); + val &= padmask; + val |= padcfg; + writel(val, &gpc->sdio1cfg); + } else { /* SDMMC3 */ + val = readl(&gpc->sdio3cfg); + val &= padmask; + val |= padcfg; + writel(val, &gpc->sdio3cfg); + } + + val = readl(&sdmmc->sdmmc_sdmemcomp_pad_ctrl); + val &= 0xFFFFFFF0; + val |= MEMCOMP_PADCTRL_VREF; + writel(val, &sdmmc->sdmmc_sdmemcomp_pad_ctrl); + + val = readl(&sdmmc->sdmmc_auto_cal_config); + val &= 0xFFFF0000; + val |= AUTO_CAL_PU_OFFSET | AUTO_CAL_PD_OFFSET | AUTO_CAL_ENABLED; + writel(val, &sdmmc->sdmmc_auto_cal_config); +} + +/* this is a weak define that we are overriding */ +int board_mmc_init(bd_t *bd) +{ + debug("board_mmc_init called\n"); + + /* Turn on SD-card bus power */ + board_sdmmc_voltage_init(); + + /* Set up the SDMMC pads as per the TRM */ + pad_init_mmc((struct tegra_mmc *)TEGRA_SDMMC1_BASE); + + /* Enable muxes, etc. for SDMMC controllers */ + pin_mux_mmc(); + + /* init dev 0 (SDMMC4), ("HSMMC") with 8-bit bus */ + tegra_mmc_init(0, 8, -1, -1); + + /* init dev 1 (SDMMC0), ("SDIO") with 8-bit bus */ + tegra_mmc_init(1, 8, -1, -1); + + return 0; +} +#endif /* MMC */ diff --git a/board/nvidia/cardhu/pinmux-config-cardhu.h b/board/nvidia/cardhu/pinmux-config-cardhu.h new file mode 100644 index 0000000..8428bba --- /dev/null +++ b/board/nvidia/cardhu/pinmux-config-cardhu.h @@ -0,0 +1,329 @@ +/* + * Copyright (c) 2010-2012, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _PINMUX_CONFIG_CARDHU_H_ +#define _PINMUX_CONFIG_CARDHU_H_ + +#define DEFAULT_PINMUX(_pingroup, _mux, _pull, _tri, _io) \ + { \ + .pingroup = PINGRP_##_pingroup, \ + .func = PMUX_FUNC_##_mux, \ + .pull = PMUX_PULL_##_pull, \ + .tristate = PMUX_TRI_##_tri, \ + .io = PMUX_PIN_##_io, \ + .lock = PMUX_PIN_LOCK_DEFAULT, \ + .od = PMUX_PIN_OD_DEFAULT, \ + .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \ + } + +#define I2C_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _od) \ + { \ + .pingroup = PINGRP_##_pingroup, \ + .func = PMUX_FUNC_##_mux, \ + .pull = PMUX_PULL_##_pull, \ + .tristate = PMUX_TRI_##_tri, \ + .io = PMUX_PIN_##_io, \ + .lock = PMUX_PIN_LOCK_##_lock, \ + .od = PMUX_PIN_OD_##_od, \ + .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \ + } + +#define LV_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _ioreset) \ + { \ + .pingroup = PINGRP_##_pingroup, \ + .func = PMUX_FUNC_##_mux, \ + .pull = PMUX_PULL_##_pull, \ + .tristate = PMUX_TRI_##_tri, \ + .io = PMUX_PIN_##_io, \ + .lock = PMUX_PIN_LOCK_##_lock, \ + .od = PMUX_PIN_OD_DEFAULT, \ + .ioreset = PMUX_PIN_IO_RESET_##_ioreset \ + } + +static struct pingroup_config tegra3_pinmux_common[] = { + /* SDMMC1 pinmux */ + DEFAULT_PINMUX(SDMMC1_CLK, SDMMC1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_CMD, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT3, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT2, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT1, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT0, SDMMC1, UP, NORMAL, INPUT), + + /* SDMMC3 pinmux */ + DEFAULT_PINMUX(SDMMC3_CLK, SDMMC3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_CMD, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT0, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT1, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT2, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT3, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT6, RSVD1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT7, RSVD1, NORMAL, NORMAL, INPUT), + + /* SDMMC4 pinmux */ + LV_PINMUX(SDMMC4_CLK, SDMMC4, NORMAL, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(SDMMC4_CMD, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(SDMMC4_DAT0, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(SDMMC4_DAT1, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(SDMMC4_DAT2, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(SDMMC4_DAT3, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(SDMMC4_DAT4, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(SDMMC4_DAT5, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(SDMMC4_DAT6, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(SDMMC4_DAT7, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(SDMMC4_RST_N, RSVD1, DOWN, NORMAL, INPUT, DISABLE, DISABLE), + + /* I2C1 pinmux */ + I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + + /* I2C2 pinmux */ + I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + + /* I2C3 pinmux */ + I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + + /* I2C4 pinmux */ + I2C_PINMUX(DDC_SCL, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + I2C_PINMUX(DDC_SDA, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + + /* Power I2C pinmux */ + I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + + DEFAULT_PINMUX(ULPI_DATA0, UARTA, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(ULPI_DATA1, UARTA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA2, UARTA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA3, RSVD1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA4, UARTA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA5, UARTA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA6, UARTA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA7, UARTA, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(ULPI_CLK, UARTD, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(ULPI_DIR, UARTD, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_NXT, UARTD, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_STP, UARTD, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(DAP3_FS, I2S2, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP3_DIN, I2S2, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP3_DOUT, I2S2, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP3_SCLK, I2S2, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PV2, OWR, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PV3, RSVD1, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(CLK2_OUT, EXTPERIPH2, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(CLK2_REQ, DAP, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_PWR1, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_PWR2, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_SDIN, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_SDOUT, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_WR_N, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_CS0_N, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_DC0, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_SCK, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_PWR0, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_PCLK, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_DE, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_HSYNC, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_VSYNC, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D0, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D1, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D2, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D3, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D4, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D5, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D6, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D7, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D8, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D9, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D10, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D11, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D12, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D13, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D14, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D15, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D16, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D17, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D18, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D19, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D20, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D21, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D22, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_D23, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_CS1_N, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_M1, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(LCD_DC1, DISPA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(CRT_HSYNC, CRT, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(CRT_VSYNC, CRT, NORMAL, NORMAL, OUTPUT), + LV_PINMUX(VI_D0, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(VI_D1, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(VI_D2, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(VI_D3, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(VI_D4, VI, NORMAL, NORMAL, OUTPUT, DISABLE, DISABLE), + LV_PINMUX(VI_D5, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(VI_D7, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(VI_D10, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(VI_MCLK, VI, UP, NORMAL, INPUT, DISABLE, DISABLE), + DEFAULT_PINMUX(UART2_RXD, UARTB, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(UART2_TXD, UARTB, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(UART2_RTS_N, UARTB, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(UART2_CTS_N, UARTB, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(UART3_TXD, UARTC, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(UART3_RXD, UARTC, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(UART3_CTS_N, UARTC, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(UART3_RTS_N, UARTC, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PU0, RSVD1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PU1, RSVD1, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PU2, RSVD1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PU3, RSVD1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PU4, PWM1, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PU5, PWM2, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PU6, RSVD1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP4_FS, I2S3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP4_DIN, I2S3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP4_DOUT, I2S3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP4_SCLK, I2S3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(CLK3_OUT, EXTPERIPH3, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(CLK3_REQ, DEV3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_WP_N, GMI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_CS2_N, RSVD1, UP, NORMAL, INPUT), /* EN_VDD_BL1 */ + DEFAULT_PINMUX(GMI_AD8, PWM0, NORMAL, NORMAL, OUTPUT), /* LCD1_BL_PWM */ + DEFAULT_PINMUX(GMI_AD10, NAND, NORMAL, NORMAL, OUTPUT), /* LCD1_BL_EN */ + DEFAULT_PINMUX(GMI_A16, SPI4, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_A17, SPI4, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_A18, SPI4, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_A19, SPI4, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(CAM_MCLK, VI_ALT2, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PCC1, RSVD1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PBB0, RSVD1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PBB3, VGP3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PBB5, VGP5, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PBB6, VGP6, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PBB7, I2S4, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PCC2, I2S4, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(JTAG_RTCK, RTCK, NORMAL, NORMAL, OUTPUT), + + /* KBC keys */ + DEFAULT_PINMUX(KB_ROW0, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW1, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW2, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW3, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW4, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW5, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW6, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW7, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW9, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW10, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW11, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW12, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW13, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW14, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW15, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL0, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL1, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL2, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL3, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL4, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL5, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL6, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL7, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PV0, RSVD1, UP, NORMAL, INPUT), + + DEFAULT_PINMUX(CLK_32K_OUT, BLINK, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(SYS_CLK_REQ, SYSCLK, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(OWR, OWR, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP1_FS, I2S0, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP1_DIN, I2S0, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP1_DOUT, I2S0, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP1_SCLK, I2S0, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(CLK1_REQ, DAP, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(CLK1_OUT, EXTPERIPH1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SPDIF_IN, SPDIF, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SPDIF_OUT, SPDIF, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(DAP2_FS, I2S1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP2_DIN, I2S1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP2_DOUT, I2S1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP2_SCLK, I2S1, NORMAL, NORMAL, INPUT), + + DEFAULT_PINMUX(SPI2_CS1_N, SPI2, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SPI1_MOSI, SPI1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SPI1_SCK, SPI1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SPI1_CS0_N, SPI1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SPI1_MISO, SPI1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(PEX_L0_PRSNT_N, PCIE, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(PEX_L0_RST_N, PCIE, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(PEX_L0_CLKREQ_N, PCIE, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(PEX_WAKE_N, PCIE, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(PEX_L1_PRSNT_N, PCIE, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(PEX_L1_RST_N, PCIE, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(PEX_L1_CLKREQ_N, PCIE, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(PEX_L2_PRSNT_N, PCIE, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(PEX_L2_RST_N, PCIE, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(PEX_L2_CLKREQ_N, PCIE, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(HDMI_CEC, CEC, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(HDMI_INT, RSVD1, NORMAL, TRISTATE, INPUT), + + /* GPIOs */ + /* SDMMC1 CD gpio */ + DEFAULT_PINMUX(GMI_IORDY, RSVD1, UP, NORMAL, INPUT), + /* SDMMC1 WP gpio */ + LV_PINMUX(VI_D11, RSVD1, UP, NORMAL, INPUT, DISABLE, DISABLE), + + /* Touch panel GPIO */ + /* Touch IRQ */ + DEFAULT_PINMUX(GMI_AD12, NAND, UP, NORMAL, INPUT), + + /* Touch RESET */ + DEFAULT_PINMUX(GMI_AD14, NAND, NORMAL, NORMAL, OUTPUT), + + /* Power rails GPIO */ + DEFAULT_PINMUX(SPI2_SCK, GMI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PBB4, VGP4, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT5, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT4, SDMMC3, UP, NORMAL, INPUT), + + LV_PINMUX(VI_D6, VI, NORMAL, NORMAL, OUTPUT, DISABLE, DISABLE), + LV_PINMUX(VI_D8, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(VI_D9, SDMMC2, NORMAL, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(VI_PCLK, RSVD1, UP, TRISTATE, INPUT, DISABLE, DISABLE), + LV_PINMUX(VI_HSYNC, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(VI_VSYNC, RSVD1, NORMAL, NORMAL, INPUT, DISABLE, DISABLE), +}; + +static struct pingroup_config unused_pins_lowpower[] = { + DEFAULT_PINMUX(GMI_WAIT, NAND, UP, TRISTATE, OUTPUT), + DEFAULT_PINMUX(GMI_ADV_N, NAND, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(GMI_CLK, NAND, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(GMI_CS3_N, NAND, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_CS7_N, NAND, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_AD0, NAND, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(GMI_AD1, NAND, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(GMI_AD2, NAND, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(GMI_AD3, NAND, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(GMI_AD4, NAND, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(GMI_AD5, NAND, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(GMI_AD6, NAND, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(GMI_AD7, NAND, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(GMI_AD9, PWM1, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_AD11, NAND, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_AD13, NAND, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_WR_N, NAND, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(GMI_OE_N, NAND, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(GMI_DQS, NAND, NORMAL, TRISTATE, OUTPUT), +}; + +#endif /* _PINMUX_CONFIG_CARDHU_H_ */ diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c index 76ec687..d1d8a29 100644 --- a/board/nvidia/common/board.c +++ b/board/nvidia/common/board.c @@ -26,22 +26,30 @@ #include <linux/compiler.h> #include <asm/io.h> #include <asm/arch/clock.h> +#ifdef CONFIG_LCD #include <asm/arch/display.h> -#include <asm/arch/emc.h> +#endif #include <asm/arch/funcmux.h> #include <asm/arch/pinmux.h> #include <asm/arch/pmu.h> +#ifdef CONFIG_PWM_TEGRA #include <asm/arch/pwm.h> +#endif #include <asm/arch/tegra.h> -#include <asm/arch/usb.h> #include <asm/arch-tegra/board.h> #include <asm/arch-tegra/clk_rst.h> #include <asm/arch-tegra/pmc.h> #include <asm/arch-tegra/sys_proto.h> #include <asm/arch-tegra/uart.h> #include <asm/arch-tegra/warmboot.h> -#include <spi.h> +#ifdef CONFIG_TEGRA_CLOCK_SCALING +#include <asm/arch/emc.h> +#endif +#ifdef CONFIG_USB_EHCI_TEGRA +#include <asm/arch/usb.h> +#endif #include <i2c.h> +#include <spi.h> #include "emc.h" DECLARE_GLOBAL_DATA_PTR; @@ -87,6 +95,12 @@ void __pin_mux_nand(void) void pin_mux_nand(void) __attribute__((weak, alias("__pin_mux_nand"))); +void __pin_mux_display(void) +{ +} + +void pin_mux_display(void) __attribute__((weak, alias("__pin_mux_display"))); + /* * Routine: power_det_init * Description: turn off power detects @@ -117,15 +131,17 @@ int board_init(void) #ifdef CONFIG_SPI_UART_SWITCH gpio_config_uart(); #endif -#ifdef CONFIG_TEGRA_SPI +#if defined(CONFIG_TEGRA_SPI) || defined(CONFIG_TEGRA_SLINK) pin_mux_spi(); spi_init(); #endif + #ifdef CONFIG_PWM_TEGRA if (pwm_init(gd->fdt_blob)) debug("%s: Failed to init pwm\n", __func__); #endif #ifdef CONFIG_LCD + pin_mux_display(); tegra_lcd_check_next_stage(gd->fdt_blob, 0); #endif /* boot param addr */ @@ -181,6 +197,9 @@ void gpio_early_init(void) __attribute__((weak, alias("__gpio_early_init"))); int board_early_init_f(void) { +#if !defined(CONFIG_TEGRA20) + pinmux_init(); +#endif board_init_uart_f(); /* Initialize periph GPIOs */ diff --git a/board/nvidia/dalmore/Makefile b/board/nvidia/dalmore/Makefile new file mode 100644 index 0000000..699b9f6 --- /dev/null +++ b/board/nvidia/dalmore/Makefile @@ -0,0 +1,36 @@ +# +# Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS := $(BOARD).o + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/nvidia/dalmore/dalmore.c b/board/nvidia/dalmore/dalmore.c new file mode 100644 index 0000000..aca3c7d --- /dev/null +++ b/board/nvidia/dalmore/dalmore.c @@ -0,0 +1,32 @@ +/* + * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <common.h> +#include <asm/arch/pinmux.h> +#include "pinmux-config-dalmore.h" + +/* + * Routine: pinmux_init + * Description: Do individual peripheral pinmux configs + */ +void pinmux_init(void) +{ + pinmux_config_table(tegra114_pinmux_common, + ARRAY_SIZE(tegra114_pinmux_common)); + + pinmux_config_table(unused_pins_lowpower, + ARRAY_SIZE(unused_pins_lowpower)); +} diff --git a/board/nvidia/dalmore/pinmux-config-dalmore.h b/board/nvidia/dalmore/pinmux-config-dalmore.h new file mode 100644 index 0000000..3dd47da --- /dev/null +++ b/board/nvidia/dalmore/pinmux-config-dalmore.h @@ -0,0 +1,249 @@ +/* + * Copyright (c) 2010-2013, NVIDIA CORPORATION. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#ifndef _PINMUX_CONFIG_DALMORE_H_ +#define _PINMUX_CONFIG_DALMORE_H_ + +#define DEFAULT_PINMUX(_pingroup, _mux, _pull, _tri, _io) \ + { \ + .pingroup = PINGRP_##_pingroup, \ + .func = PMUX_FUNC_##_mux, \ + .pull = PMUX_PULL_##_pull, \ + .tristate = PMUX_TRI_##_tri, \ + .io = PMUX_PIN_##_io, \ + .lock = PMUX_PIN_LOCK_DEFAULT, \ + .od = PMUX_PIN_OD_DEFAULT, \ + .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \ + } + +#define I2C_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _od) \ + { \ + .pingroup = PINGRP_##_pingroup, \ + .func = PMUX_FUNC_##_mux, \ + .pull = PMUX_PULL_##_pull, \ + .tristate = PMUX_TRI_##_tri, \ + .io = PMUX_PIN_##_io, \ + .lock = PMUX_PIN_LOCK_##_lock, \ + .od = PMUX_PIN_OD_##_od, \ + .ioreset = PMUX_PIN_IO_RESET_DEFAULT, \ + } + +#define LV_PINMUX(_pingroup, _mux, _pull, _tri, _io, _lock, _ioreset) \ + { \ + .pingroup = PINGRP_##_pingroup, \ + .func = PMUX_FUNC_##_mux, \ + .pull = PMUX_PULL_##_pull, \ + .tristate = PMUX_TRI_##_tri, \ + .io = PMUX_PIN_##_io, \ + .lock = PMUX_PIN_LOCK_##_lock, \ + .od = PMUX_PIN_OD_DEFAULT, \ + .ioreset = PMUX_PIN_IO_RESET_##_ioreset \ + } + +static struct pingroup_config tegra114_pinmux_common[] = { + /* SDMMC1 pinmux */ + DEFAULT_PINMUX(SDMMC1_CLK, SDMMC1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_CMD, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT3, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT2, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT1, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_DAT0, SDMMC1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC1_WP_N, SDMMC1, UP, NORMAL, INPUT), + + /* SDMMC3 pinmux */ + DEFAULT_PINMUX(SDMMC3_CLK, SDMMC3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_CLK_LB_IN, SDMMC3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_CLK_LB_OUT, SDMMC3, NORMAL, NORMAL, OUTPUT), + + DEFAULT_PINMUX(SDMMC3_CMD, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT0, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT1, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT2, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_DAT3, SDMMC3, UP, NORMAL, INPUT), + DEFAULT_PINMUX(SDMMC3_CD_N, SDMMC3, UP, NORMAL, INPUT), + + /* SDMMC4 pinmux */ + LV_PINMUX(SDMMC4_CLK, SDMMC4, NORMAL, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(SDMMC4_CMD, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(SDMMC4_DAT0, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(SDMMC4_DAT1, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(SDMMC4_DAT2, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(SDMMC4_DAT3, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(SDMMC4_DAT4, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(SDMMC4_DAT5, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(SDMMC4_DAT6, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(SDMMC4_DAT7, SDMMC4, UP, NORMAL, INPUT, DISABLE, DISABLE), + LV_PINMUX(SDMMC4_RST_N, RSVD1, DOWN, NORMAL, INPUT, DISABLE, DISABLE), + + /* I2C1 pinmux */ + I2C_PINMUX(GEN1_I2C_SCL, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + I2C_PINMUX(GEN1_I2C_SDA, I2C1, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + + /* I2C2 pinmux */ + I2C_PINMUX(GEN2_I2C_SCL, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + I2C_PINMUX(GEN2_I2C_SDA, I2C2, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + + /* I2C3 pinmux */ + I2C_PINMUX(CAM_I2C_SCL, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + I2C_PINMUX(CAM_I2C_SDA, I2C3, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + + /* I2C4 pinmux */ + I2C_PINMUX(DDC_SCL, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + I2C_PINMUX(DDC_SDA, I2C4, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + + /* Power I2C pinmux */ + I2C_PINMUX(PWR_I2C_SCL, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + I2C_PINMUX(PWR_I2C_SDA, I2CPWR, NORMAL, NORMAL, INPUT, DISABLE, ENABLE), + + DEFAULT_PINMUX(ULPI_DATA0, UARTA, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(ULPI_DATA1, UARTA, UP, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA2, UARTA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA3, UARTA, NORMAL, NORMAL, INPUT), + + DEFAULT_PINMUX(ULPI_DATA4, UARTA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA5, UARTA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA6, UARTA, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_DATA7, UARTA, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(ULPI_CLK, UARTD, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(ULPI_DIR, UARTD, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_NXT, UARTD, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(ULPI_STP, UARTD, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(DAP3_FS, I2S2, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP3_DIN, I2S2, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP3_DOUT, I2S2, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP3_SCLK, I2S2, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(CLK2_OUT, EXTPERIPH2, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(CLK2_REQ, DAP, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(UART2_RXD, UARTB, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(UART2_TXD, UARTB, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(UART2_RTS_N, UARTB, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(UART2_CTS_N, UARTB, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(UART3_TXD, UARTC, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(UART3_RXD, UARTC, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(UART3_CTS_N, UARTC, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(UART3_RTS_N, UARTC, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PU0, RSVD1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PU1, RSVD1, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PU2, RSVD1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PU3, RSVD1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PU4, PWM1, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PU5, PWM2, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GPIO_PU6, RSVD1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP4_FS, I2S3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP4_DIN, I2S3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP4_DOUT, I2S3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP4_SCLK, I2S3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(CLK3_OUT, EXTPERIPH3, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(CLK3_REQ, DEV3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_WP_N, GMI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_CS2_N, RSVD1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_AD8, PWM0, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_AD10, NAND, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_A16, UARTD, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(GMI_A17, UARTD, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_A18, UARTD, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_A19, UARTD, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(CAM_MCLK, VI_ALT2, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PCC1, RSVD1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PBB0, RSVD1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PBB3, VGP3, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PBB5, VGP5, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PBB6, VGP6, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PBB7, I2S4, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PCC2, I2S4, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(JTAG_RTCK, RTCK, NORMAL, NORMAL, OUTPUT), + + /* KBC keys */ + DEFAULT_PINMUX(KB_ROW0, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW1, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW2, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW3, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW4, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW5, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW6, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW7, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW9, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW10, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL0, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL1, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL2, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL3, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL4, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL5, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL6, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(KB_COL7, KBC, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PV0, RSVD1, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PV1, RSVD1, UP, NORMAL, INPUT), + + DEFAULT_PINMUX(CLK_32K_OUT, BLINK, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(SYS_CLK_REQ, SYSCLK, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(OWR, OWR, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP1_FS, I2S0, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP1_DIN, I2S0, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP1_DOUT, I2S0, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP1_SCLK, I2S0, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(CLK1_REQ, DAP, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(CLK1_OUT, EXTPERIPH1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SPDIF_IN, SPDIF, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SPDIF_OUT, SPDIF, NORMAL, NORMAL, OUTPUT), + DEFAULT_PINMUX(DAP2_FS, I2S1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP2_DIN, I2S1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP2_DOUT, I2S1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(DAP2_SCLK, I2S1, NORMAL, NORMAL, INPUT), + + DEFAULT_PINMUX(SPI1_MOSI, SPI1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SPI1_SCK, SPI1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SPI1_CS0_N, SPI1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SPI1_CS1_N, SPI1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SPI1_CS2_N, SPI1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(SPI1_MISO, SPI1, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(HDMI_CEC, CEC, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(HDMI_INT, RSVD1, NORMAL, TRISTATE, INPUT), + + /* GPIOs */ + /* SDMMC1 CD gpio */ + DEFAULT_PINMUX(GMI_IORDY, RSVD1, UP, NORMAL, INPUT), + + /* Touch RESET */ + DEFAULT_PINMUX(GMI_AD14, NAND, NORMAL, NORMAL, OUTPUT), + + /* Power rails GPIO */ + DEFAULT_PINMUX(SPI2_SCK, GMI, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(GPIO_PBB4, VGP4, NORMAL, NORMAL, INPUT), + DEFAULT_PINMUX(KB_ROW8, KBC, UP, NORMAL, INPUT), +}; + +static struct pingroup_config unused_pins_lowpower[] = { + DEFAULT_PINMUX(GMI_CS0_N, NAND, UP, TRISTATE, OUTPUT), + DEFAULT_PINMUX(GMI_CS3_N, NAND, UP, TRISTATE, OUTPUT), + DEFAULT_PINMUX(GMI_CS4_N, NAND, UP, TRISTATE, OUTPUT), + DEFAULT_PINMUX(GMI_CS7_N, NAND, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_AD0, NAND, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GMI_AD1, NAND, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GMI_AD2, NAND, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GMI_AD3, NAND, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GMI_AD4, NAND, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GMI_AD5, NAND, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GMI_AD6, NAND, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GMI_AD7, NAND, NORMAL, TRISTATE, INPUT), + DEFAULT_PINMUX(GMI_AD9, PWM1, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(GMI_AD11, NAND, NORMAL, TRISTATE, OUTPUT), + DEFAULT_PINMUX(GMI_AD13, NAND, UP, NORMAL, INPUT), + DEFAULT_PINMUX(GMI_WR_N, NAND, NORMAL, TRISTATE, OUTPUT), +}; + +#endif /* _PINMUX_CONFIG_DALMORE_H_ */ diff --git a/board/nvidia/dts/tegra114-dalmore.dts b/board/nvidia/dts/tegra114-dalmore.dts new file mode 100644 index 0000000..7315577 --- /dev/null +++ b/board/nvidia/dts/tegra114-dalmore.dts @@ -0,0 +1,13 @@ +/dts-v1/; + +/include/ ARCH_CPU_DTS + +/ { + model = "NVIDIA Dalmore"; + compatible = "nvidia,dalmore", "nvidia,tegra114"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; +}; diff --git a/board/nvidia/dts/tegra20-harmony.dts b/board/nvidia/dts/tegra20-harmony.dts index 5645a8d..aeda3a1 100644 --- a/board/nvidia/dts/tegra20-harmony.dts +++ b/board/nvidia/dts/tegra20-harmony.dts @@ -15,23 +15,20 @@ reg = <0x00000000 0x40000000>; }; - clocks { - clk_32k: clk_32k { - clock-frequency = <32000>; - }; - osc { - clock-frequency = <12000000>; - }; - }; - - clock@60006000 { - clocks = <&clk_32k &osc>; - }; - serial@70006300 { clock-frequency = < 216000000 >; }; + nand-controller@70008000 { + nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */ + nvidia,width = <8>; + nvidia,timing = <26 100 20 80 20 10 12 10 70>; + nand@0 { + reg = <0>; + compatible = "hynix,hy27uf4g2b", "nand-flash"; + }; + }; + i2c@7000c000 { status = "disabled"; }; @@ -55,14 +52,4 @@ usb@c5004000 { nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */ }; - - nand-controller@70008000 { - nvidia,wp-gpios = <&gpio 23 0>; /* PC7 */ - nvidia,width = <8>; - nvidia,timing = <26 100 20 80 20 10 12 10 70>; - nand@0 { - reg = <0>; - compatible = "hynix,hy27uf4g2b", "nand-flash"; - }; - }; }; diff --git a/board/nvidia/dts/tegra20-seaboard.dts b/board/nvidia/dts/tegra20-seaboard.dts index dd98ca4..527a296 100644 --- a/board/nvidia/dts/tegra20-seaboard.dts +++ b/board/nvidia/dts/tegra20-seaboard.dts @@ -27,6 +27,17 @@ reg = < 0x00000000 0x40000000 >; }; + host1x { + status = "okay"; + dc@54200000 { + status = "okay"; + rgb { + status = "okay"; + nvidia,panel = <&lcd_panel>; + }; + }; + }; + /* This is not used in U-Boot, but is expected to be in kernel .dts */ i2c@7000d000 { clock-frequency = <100000>; @@ -45,37 +56,18 @@ }; }; - clocks { - osc { - clock-frequency = <12000000>; - }; - }; - - clock@60006000 { - clocks = <&clk_32k &osc>; - }; - serial@70006300 { clock-frequency = < 216000000 >; }; - sdhci@c8000400 { - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ - wp-gpios = <&gpio 57 0>; /* gpio PH1 */ - power-gpios = <&gpio 70 0>; /* gpio PI6 */ - }; - - sdhci@c8000600 { - support-8bit; - }; - - usb@c5000000 { - nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */ - dr_mode = "otg"; - }; - - usb@c5004000 { - status = "disabled"; + nand-controller@70008000 { + nvidia,wp-gpios = <&gpio 59 0>; /* PH3 */ + nvidia,width = <8>; + nvidia,timing = <26 100 20 80 20 10 12 10 70>; + nand@0 { + reg = <0>; + compatible = "hynix,hy27uf4g2b", "nand-flash"; + }; }; i2c@7000c000 { @@ -90,6 +82,33 @@ clock-frequency = <100000>; }; + kbc@7000e200 { + linux,keymap = <0x00020011 0x0003001f 0x0004001e 0x0005002c + 0x000701d0 0x0107007d 0x02060064 0x02070038 0x03000006 + 0x03010005 0x03020013 0x03030012 0x03040021 0x03050020 + 0x0306002d 0x04000008 0x04010007 0x04020014 0x04030023 + 0x04040022 0x0405002f 0x0406002e 0x04070039 0x0500000a + 0x05010009 0x05020016 0x05030015 0x05040024 0x05050031 + 0x05060030 0x0507002b 0x0600000c 0x0601000b 0x06020018 + 0x06030017 0x06040026 0x06050025 0x06060033 0x06070032 + 0x0701000d 0x0702001b 0x0703001c 0x0707008b 0x08040036 + 0x0805002a 0x09050061 0x0907001d 0x0b00001a 0x0b010019 + 0x0b020028 0x0b030027 0x0b040035 0x0b050034 0x0c000044 + 0x0c010043 0x0c02000e 0x0c030004 0x0c040003 0x0c050067 + 0x0c0600d2 0x0c070077 0x0d00006e 0x0d01006f 0x0d030068 + 0x0d04006d 0x0d05006a 0x0d06006c 0x0d070069 0x0e000057 + 0x0e010058 0x0e020042 0x0e030010 0x0e04003e 0x0e05003d + 0x0e060002 0x0e070041 0x0f000001 0x0f010029 0x0f02003f + 0x0f03000f 0x0f04003b 0x0f05003c 0x0f06003a 0x0f070040 + 0x14000047 0x15000049 0x15010048 0x1502004b 0x1504004f + 0x16010062 0x1602004d 0x1603004c 0x16040051 0x16050050 + 0x16070052 0x1b010037 0x1b03004a 0x1b04004e 0x1b050053 + 0x1c050073 0x1d030066 0x1d04006b 0x1d0500e0 0x1d060072 + 0x1d0700e1 0x1e000045 0x1e010046 0x1e020071 + 0x1f04008a>; + linux,fn-keymap = <0x05040002>; + }; + emc@7000f400 { emc-table@190000 { reg = < 190000 >; @@ -127,52 +146,23 @@ }; }; - kbc@7000e200 { - linux,keymap = <0x00020011 0x0003001f 0x0004001e 0x0005002c - 0x000701d0 0x0107007d 0x02060064 0x02070038 0x03000006 - 0x03010005 0x03020013 0x03030012 0x03040021 0x03050020 - 0x0306002d 0x04000008 0x04010007 0x04020014 0x04030023 - 0x04040022 0x0405002f 0x0406002e 0x04070039 0x0500000a - 0x05010009 0x05020016 0x05030015 0x05040024 0x05050031 - 0x05060030 0x0507002b 0x0600000c 0x0601000b 0x06020018 - 0x06030017 0x06040026 0x06050025 0x06060033 0x06070032 - 0x0701000d 0x0702001b 0x0703001c 0x0707008b 0x08040036 - 0x0805002a 0x09050061 0x0907001d 0x0b00001a 0x0b010019 - 0x0b020028 0x0b030027 0x0b040035 0x0b050034 0x0c000044 - 0x0c010043 0x0c02000e 0x0c030004 0x0c040003 0x0c050067 - 0x0c0600d2 0x0c070077 0x0d00006e 0x0d01006f 0x0d030068 - 0x0d04006d 0x0d05006a 0x0d06006c 0x0d070069 0x0e000057 - 0x0e010058 0x0e020042 0x0e030010 0x0e04003e 0x0e05003d - 0x0e060002 0x0e070041 0x0f000001 0x0f010029 0x0f02003f - 0x0f03000f 0x0f04003b 0x0f05003c 0x0f06003a 0x0f070040 - 0x14000047 0x15000049 0x15010048 0x1502004b 0x1504004f - 0x16010062 0x1602004d 0x1603004c 0x16040051 0x16050050 - 0x16070052 0x1b010037 0x1b03004a 0x1b04004e 0x1b050053 - 0x1c050073 0x1d030066 0x1d04006b 0x1d0500e0 0x1d060072 - 0x1d0700e1 0x1e000045 0x1e010046 0x1e020071 - 0x1f04008a>; - linux,fn-keymap = <0x05040002>; + usb@c5000000 { + nvidia,vbus-gpio = <&gpio 24 0>; /* PD0 */ + dr_mode = "otg"; }; - nand-controller@70008000 { - nvidia,wp-gpios = <&gpio 59 0>; /* PH3 */ - nvidia,width = <8>; - nvidia,timing = <26 100 20 80 20 10 12 10 70>; - nand@0 { - reg = <0>; - compatible = "hynix,hy27uf4g2b", "nand-flash"; - }; + usb@c5004000 { + status = "disabled"; }; - host1x { - status = "okay"; - dc@54200000 { - status = "okay"; - rgb { - status = "okay"; - nvidia,panel = <&lcd_panel>; - }; - }; + sdhci@c8000400 { + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ + }; + + sdhci@c8000600 { + support-8bit; }; lcd_panel: panel { @@ -195,5 +185,4 @@ nvidia,panel-vdd-gpios = <&gpio 22 0>; /* PC6 */ nvidia,panel-timings = <400 4 203 17 15>; }; - }; diff --git a/board/nvidia/dts/tegra20-ventana.dts b/board/nvidia/dts/tegra20-ventana.dts index 38b7b13..3e5e39d 100644 --- a/board/nvidia/dts/tegra20-ventana.dts +++ b/board/nvidia/dts/tegra20-ventana.dts @@ -14,19 +14,6 @@ reg = <0x00000000 0x40000000>; }; - clocks { - clk_32k: clk_32k { - clock-frequency = <32000>; - }; - osc { - clock-frequency = <12000000>; - }; - }; - - clock@60006000 { - clocks = <&clk_32k &osc>; - }; - serial@70006300 { clock-frequency = < 216000000 >; }; diff --git a/board/nvidia/dts/tegra20-whistler.dts b/board/nvidia/dts/tegra20-whistler.dts index f830cf3..4579557 100644 --- a/board/nvidia/dts/tegra20-whistler.dts +++ b/board/nvidia/dts/tegra20-whistler.dts @@ -16,16 +16,6 @@ reg = < 0x00000000 0x20000000 >; }; - clocks { - osc { - clock-frequency = <12000000>; - }; - }; - - clock@60006000 { - clocks = <&clk_32k &osc>; - }; - serial@70006000 { clock-frequency = < 216000000 >; }; diff --git a/board/nvidia/dts/tegra30-cardhu.dts b/board/nvidia/dts/tegra30-cardhu.dts new file mode 100644 index 0000000..f9f80c5 --- /dev/null +++ b/board/nvidia/dts/tegra30-cardhu.dts @@ -0,0 +1,47 @@ +/dts-v1/; + +/memreserve/ 0x1c000000 0x04000000; +/include/ ARCH_CPU_DTS + +/ { + model = "NVIDIA Cardhu"; + compatible = "nvidia,cardhu", "nvidia,tegra30"; + + aliases { + i2c0 = "/i2c@7000d000"; + i2c1 = "/i2c@7000c000"; + i2c2 = "/i2c@7000c400"; + i2c3 = "/i2c@7000c500"; + i2c4 = "/i2c@7000c700"; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; + }; + + i2c@7000c000 { + clock-frequency = <100000>; + }; + + i2c@7000c400 { + clock-frequency = <100000>; + }; + + i2c@7000c500 { + clock-frequency = <100000>; + }; + + i2c@7000c700 { + clock-frequency = <100000>; + }; + + i2c@7000d000 { + clock-frequency = <100000>; + }; + + spi@7000da00 { + status = "okay"; + spi-max-frequency = <25000000>; + }; +}; diff --git a/board/olimex/mx23_olinuxino/Makefile b/board/olimex/mx23_olinuxino/Makefile new file mode 100644 index 0000000..ff41cff --- /dev/null +++ b/board/olimex/mx23_olinuxino/Makefile @@ -0,0 +1,47 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +ifndef CONFIG_SPL_BUILD +COBJS := mx23_olinuxino.o +else +COBJS := spl_boot.o +endif + +SRCS := $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(call cmd_link_o_target, $(OBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/olimex/mx23_olinuxino/mx23_olinuxino.c b/board/olimex/mx23_olinuxino/mx23_olinuxino.c new file mode 100644 index 0000000..6a6053b --- /dev/null +++ b/board/olimex/mx23_olinuxino/mx23_olinuxino.c @@ -0,0 +1,71 @@ +/* + * Olimex MX23 Olinuxino board + * + * Copyright (C) 2013 Marek Vasut <marex@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/io.h> +#include <asm/arch/iomux-mx23.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/clock.h> +#include <asm/arch/sys_proto.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Functions + */ +int board_early_init_f(void) +{ + /* IO0 clock at 480MHz */ + mxs_set_ioclk(MXC_IOCLK0, 480000); + + /* SSP0 clock at 96MHz */ + mxs_set_sspclk(MXC_SSPCLK0, 96000, 0); + + return 0; +} + +int dram_init(void) +{ + return mxs_dram_init(); +} + +#ifdef CONFIG_CMD_MMC +static int mx23_olx_mmc_cd(int id) +{ + return 1; /* Card always present */ +} + +int board_mmc_init(bd_t *bis) +{ + return mxsmmc_initialize(bis, 0, NULL, mx23_olx_mmc_cd); +} +#endif + +int board_init(void) +{ + /* Adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + return 0; +} diff --git a/board/olimex/mx23_olinuxino/spl_boot.c b/board/olimex/mx23_olinuxino/spl_boot.c new file mode 100644 index 0000000..7def8bc --- /dev/null +++ b/board/olimex/mx23_olinuxino/spl_boot.c @@ -0,0 +1,99 @@ +/* + * Olimex MX23 Olinuxino Boot setup + * + * Copyright (C) 2013 Marek Vasut <marex@denx.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#include <asm/io.h> +#include <asm/arch/iomux-mx23.h> +#include <asm/arch/imx-regs.h> +#include <asm/arch/sys_proto.h> + +#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_16MA | MXS_PAD_PULLUP) +#define MUX_CONFIG_SSP (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP) + +const iomux_cfg_t iomux_setup[] = { + /* DUART */ + MX23_PAD_PWM0__DUART_RX, + MX23_PAD_PWM1__DUART_TX, + + /* EMI */ + MX23_PAD_EMI_D00__EMI_D00 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D01__EMI_D01 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D02__EMI_D02 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D03__EMI_D03 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D04__EMI_D04 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D05__EMI_D05 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D06__EMI_D06 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D07__EMI_D07 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D08__EMI_D08 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D09__EMI_D09 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D10__EMI_D10 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D11__EMI_D11 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D12__EMI_D12 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D13__EMI_D13 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D14__EMI_D14 | MUX_CONFIG_EMI, + MX23_PAD_EMI_D15__EMI_D15 | MUX_CONFIG_EMI, + MX23_PAD_EMI_DQM0__EMI_DQM0 | MUX_CONFIG_EMI, + MX23_PAD_EMI_DQM1__EMI_DQM1 | MUX_CONFIG_EMI, + MX23_PAD_EMI_DQS0__EMI_DQS0 | MUX_CONFIG_EMI, + MX23_PAD_EMI_DQS1__EMI_DQS1 | MUX_CONFIG_EMI, + MX23_PAD_EMI_CLK__EMI_CLK | MUX_CONFIG_EMI, + MX23_PAD_EMI_CLKN__EMI_CLKN | MUX_CONFIG_EMI, + + MX23_PAD_EMI_A00__EMI_A00 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A01__EMI_A01 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A02__EMI_A02 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A03__EMI_A03 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A04__EMI_A04 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A05__EMI_A05 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A06__EMI_A06 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A07__EMI_A07 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A08__EMI_A08 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A09__EMI_A09 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A10__EMI_A10 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A11__EMI_A11 | MUX_CONFIG_EMI, + MX23_PAD_EMI_A12__EMI_A12 | MUX_CONFIG_EMI, + MX23_PAD_EMI_BA0__EMI_BA0 | MUX_CONFIG_EMI, + MX23_PAD_EMI_BA1__EMI_BA1 | MUX_CONFIG_EMI, + + MX23_PAD_EMI_CASN__EMI_CASN | MUX_CONFIG_EMI, + MX23_PAD_EMI_CE0N__EMI_CE0N | MUX_CONFIG_EMI, + MX23_PAD_EMI_CE1N__EMI_CE1N | MUX_CONFIG_EMI, + MX23_PAD_EMI_CKE__EMI_CKE | MUX_CONFIG_EMI, + MX23_PAD_EMI_RASN__EMI_RASN | MUX_CONFIG_EMI, + MX23_PAD_EMI_WEN__EMI_WEN | MUX_CONFIG_EMI, + + /* MMC 0 */ + MX23_PAD_SSP1_CMD__SSP1_CMD | MUX_CONFIG_SSP, + MX23_PAD_SSP1_DATA0__SSP1_DATA0 | MUX_CONFIG_SSP, + MX23_PAD_SSP1_DATA1__SSP1_DATA1 | MUX_CONFIG_SSP, + MX23_PAD_SSP1_DATA2__SSP1_DATA2 | MUX_CONFIG_SSP, + MX23_PAD_SSP1_DATA3__SSP1_DATA3 | MUX_CONFIG_SSP, + MX23_PAD_SSP1_SCK__SSP1_SCK | MUX_CONFIG_SSP, +}; + +void board_init_ll(void) +{ + mxs_common_spl_init(iomux_setup, ARRAY_SIZE(iomux_setup)); +} diff --git a/board/phytec/pcm051/Makefile b/board/phytec/pcm051/Makefile new file mode 100644 index 0000000..67a87a1 --- /dev/null +++ b/board/phytec/pcm051/Makefile @@ -0,0 +1,46 @@ +# +# Makefile +# +# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed "as is" WITHOUT ANY WARRANTY of any +# kind, whether express or implied; without even the implied warranty +# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +ifdef CONFIG_SPL_BUILD +COBJS := mux.o +endif + +COBJS += board.o +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c new file mode 100644 index 0000000..55bc018 --- /dev/null +++ b/board/phytec/pcm051/board.c @@ -0,0 +1,266 @@ +/* + * board.c + * + * Board functions for Phytec phyCORE-AM335x (pcm051) based boards + * + * Copyright (C) 2013 Lemonage Software GmbH + * Author Lars Poeschel <poeschel@lemonage.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <errno.h> +#include <spl.h> +#include <asm/arch/cpu.h> +#include <asm/arch/hardware.h> +#include <asm/arch/omap.h> +#include <asm/arch/ddr_defs.h> +#include <asm/arch/clock.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mmc_host_def.h> +#include <asm/arch/sys_proto.h> +#include <asm/io.h> +#include <asm/emif.h> +#include <asm/gpio.h> +#include <i2c.h> +#include <miiphy.h> +#include <cpsw.h> +#include "board.h" + +DECLARE_GLOBAL_DATA_PTR; + +static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE; +#ifdef CONFIG_SPL_BUILD +static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE; +#endif + +/* MII mode defines */ +#define MII_MODE_ENABLE 0x0 +#define RGMII_MODE_ENABLE 0xA +#define RMII_RGMII2_MODE_ENABLE 0x49 + +static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; + +/* UART defines */ +#ifdef CONFIG_SPL_BUILD +#define UART_RESET (0x1 << 1) +#define UART_CLK_RUNNING_MASK 0x1 +#define UART_SMART_IDLE_EN (0x1 << 0x3) + +/* DDR RAM defines */ +#define DDR_CLK_MHZ 303 /* DDR_DPLL_MULT value */ + +static void rtc32k_enable(void) +{ + struct rtc_regs *rtc = (struct rtc_regs *)AM335X_RTC_BASE; + + /* + * Unlock the RTC's registers. For more details please see the + * RTC_SS section of the TRM. In order to unlock we need to + * write these specific values (keys) in this order. + */ + writel(0x83e70b13, &rtc->kick0r); + writel(0x95a4f1e0, &rtc->kick1r); + + /* Enable the RTC 32K OSC by setting bits 3 and 6. */ + writel((1 << 3) | (1 << 6), &rtc->osc); +} + +static const struct ddr_data ddr3_data = { + .datardsratio0 = MT41J256M8HX15E_RD_DQS, + .datawdsratio0 = MT41J256M8HX15E_WR_DQS, + .datafwsratio0 = MT41J256M8HX15E_PHY_FIFO_WE, + .datawrsratio0 = MT41J256M8HX15E_PHY_WR_DATA, + .datadldiff0 = PHY_DLL_LOCK_DIFF, +}; + +static const struct cmd_control ddr3_cmd_ctrl_data = { + .cmd0csratio = MT41J256M8HX15E_RATIO, + .cmd0dldiff = MT41J256M8HX15E_DLL_LOCK_DIFF, + .cmd0iclkout = MT41J256M8HX15E_INVERT_CLKOUT, + + .cmd1csratio = MT41J256M8HX15E_RATIO, + .cmd1dldiff = MT41J256M8HX15E_DLL_LOCK_DIFF, + .cmd1iclkout = MT41J256M8HX15E_INVERT_CLKOUT, + + .cmd2csratio = MT41J256M8HX15E_RATIO, + .cmd2dldiff = MT41J256M8HX15E_DLL_LOCK_DIFF, + .cmd2iclkout = MT41J256M8HX15E_INVERT_CLKOUT, +}; + +static struct emif_regs ddr3_emif_reg_data = { + .sdram_config = MT41J256M8HX15E_EMIF_SDCFG, + .ref_ctrl = MT41J256M8HX15E_EMIF_SDREF, + .sdram_tim1 = MT41J256M8HX15E_EMIF_TIM1, + .sdram_tim2 = MT41J256M8HX15E_EMIF_TIM2, + .sdram_tim3 = MT41J256M8HX15E_EMIF_TIM3, + .zq_config = MT41J256M8HX15E_ZQ_CFG, + .emif_ddr_phy_ctlr_1 = MT41J256M8HX15E_EMIF_READ_LATENCY, +}; +#endif + +/* + * early system init of muxing and clocks. + */ +void s_init(void) +{ + /* + * WDT1 is already running when the bootloader gets control + * Disable it to avoid "random" resets + */ + writel(0xAAAA, &wdtimer->wdtwspr); + while (readl(&wdtimer->wdtwwps) != 0x0) + ; + writel(0x5555, &wdtimer->wdtwspr); + while (readl(&wdtimer->wdtwwps) != 0x0) + ; + +#ifdef CONFIG_SPL_BUILD + /* Setup the PLLs and the clocks for the peripherals */ + pll_init(); + + /* Enable RTC32K clock */ + rtc32k_enable(); + + /* UART softreset */ + u32 regval; + + enable_uart0_pin_mux(); + + regval = readl(&uart_base->uartsyscfg); + regval |= UART_RESET; + writel(regval, &uart_base->uartsyscfg); + while ((readl(&uart_base->uartsyssts) & UART_CLK_RUNNING_MASK) + != UART_CLK_RUNNING_MASK) + ; + + /* Disable smart idle */ + regval = readl(&uart_base->uartsyscfg); + regval |= UART_SMART_IDLE_EN; + writel(regval, &uart_base->uartsyscfg); + + gd = &gdata; + + preloader_console_init(); + + /* Initalize the board header */ + enable_i2c0_pin_mux(); + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + + enable_board_pin_mux(); + + config_ddr(DDR_CLK_MHZ, MT41J256M8HX15E_IOCTRL_VALUE, &ddr3_data, + &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data); +#endif +} + +/* + * Basic board specific setup. Pinmux has been handled already. + */ +int board_init(void) +{ + i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); + + gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; + + return 0; +} + +#ifdef CONFIG_DRIVER_TI_CPSW +static void cpsw_control(int enabled) +{ + /* VTP can be added here */ + + return; +} + +static struct cpsw_slave_data cpsw_slaves[] = { + { + .slave_reg_ofs = 0x208, + .sliver_reg_ofs = 0xd80, + .phy_id = 0, + .phy_if = PHY_INTERFACE_MODE_RGMII, + }, + { + .slave_reg_ofs = 0x308, + .sliver_reg_ofs = 0xdc0, + .phy_id = 1, + .phy_if = PHY_INTERFACE_MODE_RGMII, + }, +}; + +static struct cpsw_platform_data cpsw_data = { + .mdio_base = AM335X_CPSW_MDIO_BASE, + .cpsw_base = AM335X_CPSW_BASE, + .mdio_div = 0xff, + .channels = 8, + .cpdma_reg_ofs = 0x800, + .slaves = 1, + .slave_data = cpsw_slaves, + .ale_reg_ofs = 0xd00, + .ale_entries = 1024, + .host_port_reg_ofs = 0x108, + .hw_stats_reg_ofs = 0x900, + .mac_control = (1 << 5), + .control = cpsw_control, + .host_port_num = 0, + .version = CPSW_CTRL_VERSION_2, +}; +#endif + +#if defined(CONFIG_DRIVER_TI_CPSW) || \ + (defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) +int board_eth_init(bd_t *bis) +{ + int rv, n = 0; +#ifdef CONFIG_DRIVER_TI_CPSW + uint8_t mac_addr[6]; + uint32_t mac_hi, mac_lo; + + if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { + printf("<ethaddr> not set. Reading from E-fuse\n"); + /* try reading mac address from efuse */ + mac_lo = readl(&cdev->macid0l); + mac_hi = readl(&cdev->macid0h); + mac_addr[0] = mac_hi & 0xFF; + mac_addr[1] = (mac_hi & 0xFF00) >> 8; + mac_addr[2] = (mac_hi & 0xFF0000) >> 16; + mac_addr[3] = (mac_hi & 0xFF000000) >> 24; + mac_addr[4] = mac_lo & 0xFF; + mac_addr[5] = (mac_lo & 0xFF00) >> 8; + + if (is_valid_ether_addr(mac_addr)) + eth_setenv_enetaddr("ethaddr", mac_addr); + else + goto try_usbether; + } + + writel(RMII_RGMII2_MODE_ENABLE, &cdev->miisel); + + rv = cpsw_register(&cpsw_data); + if (rv < 0) + printf("Error %d registering CPSW switch\n", rv); + else + n += rv; +try_usbether: +#endif + +#if defined(CONFIG_USB_ETHER) && !defined(CONFIG_SPL_BUILD) + rv = usb_eth_initialize(bis); + if (rv < 0) + printf("Error %d registering USB_ETHER\n", rv); + else + n += rv; +#endif + return n; +} +#endif diff --git a/board/phytec/pcm051/board.h b/board/phytec/pcm051/board.h new file mode 100644 index 0000000..c2630d7 --- /dev/null +++ b/board/phytec/pcm051/board.h @@ -0,0 +1,33 @@ +/* + * board.h + * + * Phytec phyCORE-AM335x (pcm051) boards information header + * + * Copyright (C) 2013, Lemonage Software GmbH + * Author Lars Poeschel <poeschel@lemonage.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +/* + * We have three pin mux functions that must exist. We must be able to enable + * uart0, for initial output and i2c0 to read the main EEPROM. We then have a + * main pinmux function that can be overridden to enable all other pinmux that + * is required on the board. + */ +void enable_uart0_pin_mux(void); +void enable_i2c0_pin_mux(void); +void enable_board_pin_mux(void); +void enable_cbmux_pin_mux(void); +#endif diff --git a/board/phytec/pcm051/mux.c b/board/phytec/pcm051/mux.c new file mode 100644 index 0000000..4d3a1d5 --- /dev/null +++ b/board/phytec/pcm051/mux.c @@ -0,0 +1,128 @@ +/* + * mux.c + * + * Copyright (C) 2013 Lemonage Software GmbH + * Author Lars Poeschel <poeschel@lemonage.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <asm/arch/sys_proto.h> +#include <asm/arch/hardware.h> +#include <asm/arch/mux.h> +#include <asm/io.h> +#include "board.h" + +static struct module_pin_mux uart0_pin_mux[] = { + {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ + {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ + {-1}, +}; + +#ifdef CONFIG_MMC +static struct module_pin_mux mmc0_pin_mux[] = { + {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ + {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ + {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ + {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ + {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ + {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ + {OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)}, /* MMC0_WP */ + {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */ + {-1}, +}; +#endif + +#ifdef CONFIG_I2C +static struct module_pin_mux i2c0_pin_mux[] = { + {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | + PULLUDEN | SLEWCTRL)}, /* I2C_DATA */ + {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | + PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */ + {-1}, +}; +#endif + +#ifdef CONFIG_SPI +static struct module_pin_mux spi0_pin_mux[] = { + {OFFSET(spi0_sclk), (MODE(0) | RXACTIVE | PULLUDEN)}, /* SPI0_SCLK */ + {OFFSET(spi0_d0), (MODE(0) | RXACTIVE | + PULLUDEN | PULLUP_EN)}, /* SPI0_D0 */ + {OFFSET(spi0_d1), (MODE(0) | RXACTIVE | PULLUDEN)}, /* SPI0_D1 */ + {OFFSET(spi0_cs0), (MODE(0) | RXACTIVE | + PULLUDEN | PULLUP_EN)}, /* SPI0_CS0 */ + {-1}, +}; +#endif + +static struct module_pin_mux rmii1_pin_mux[] = { + {OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* RMII1_CRS */ + {OFFSET(mii1_rxerr), MODE(1) | RXACTIVE}, /* RMII1_RXERR */ + {OFFSET(mii1_txen), MODE(1)}, /* RMII1_TXEN */ + {OFFSET(mii1_txd1), MODE(1)}, /* RMII1_TXD1 */ + {OFFSET(mii1_txd0), MODE(1)}, /* RMII1_TXD0 */ + {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* RMII1_RXD1 */ + {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* RMII1_RXD0 */ + {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ + {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ + {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* RMII1_REFCLK */ + {-1}, +}; + +static struct module_pin_mux cbmux_pin_mux[] = { + {OFFSET(uart0_ctsn), MODE(7) | RXACTIVE | PULLDOWN_EN}, /* JP3 */ + {OFFSET(uart0_rtsn), MODE(7) | RXACTIVE | PULLUP_EN}, /* JP4 */ + {-1}, +}; + +#ifdef CONFIG_NAND +static struct module_pin_mux nand_pin_mux[] = { + {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */ + {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */ + {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */ + {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */ + {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */ + {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */ + {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */ + {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */ + {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ + {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ + {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ + {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ + {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ + {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ + {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */ + {-1}, +}; +#endif + +void enable_uart0_pin_mux(void) +{ + configure_module_pin_mux(uart0_pin_mux); +} + +void enable_i2c0_pin_mux(void) +{ + configure_module_pin_mux(i2c0_pin_mux); +} + +void enable_board_pin_mux() +{ + configure_module_pin_mux(rmii1_pin_mux); + configure_module_pin_mux(mmc0_pin_mux); + configure_module_pin_mux(cbmux_pin_mux); +#ifdef CONFIG_NAND + configure_module_pin_mux(nand_pin_mux); +#endif +#ifdef CONFIG_SPI + configure_module_pin_mux(spi0_pin_mux); +#endif +} diff --git a/board/schulercontrol/sc_sps_1/sc_sps_1.c b/board/schulercontrol/sc_sps_1/sc_sps_1.c index fda191a..8138237 100644 --- a/board/schulercontrol/sc_sps_1/sc_sps_1.c +++ b/board/schulercontrol/sc_sps_1/sc_sps_1.c @@ -43,14 +43,14 @@ DECLARE_GLOBAL_DATA_PTR; int board_early_init_f(void) { /* IO0 clock at 480MHz */ - mx28_set_ioclk(MXC_IOCLK0, 480000); + mxs_set_ioclk(MXC_IOCLK0, 480000); /* IO1 clock at 480MHz */ - mx28_set_ioclk(MXC_IOCLK1, 480000); + mxs_set_ioclk(MXC_IOCLK1, 480000); /* SSP0 clock at 96MHz */ - mx28_set_sspclk(MXC_SSPCLK0, 96000, 0); + mxs_set_sspclk(MXC_SSPCLK0, 96000, 0); /* SSP2 clock at 96MHz */ - mx28_set_sspclk(MXC_SSPCLK2, 96000, 0); + mxs_set_sspclk(MXC_SSPCLK2, 96000, 0); #ifdef CONFIG_CMD_USB mxs_iomux_setup_pad(MX28_PAD_AUART1_CTS__USB0_OVERCURRENT); @@ -78,7 +78,7 @@ int dram_init(void) #ifdef CONFIG_CMD_MMC int board_mmc_init(bd_t *bis) { - return mxsmmc_initialize(bis, 0, NULL); + return mxsmmc_initialize(bis, 0, NULL, NULL); } #endif diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index ed4229e..48e6896 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -73,6 +73,17 @@ static inline int board_is_idk(void) return !strncmp(header.config, "SKU#02", 6); } +static int board_is_gp_evm(void) +{ + return !strncmp("A33515BB", header.name, 8); +} + +int board_is_evm_15_or_later(void) +{ + return (!strncmp("A33515BB", header.name, 8) && + strncmp("1.5", header.version, 3) <= 0); +} + /* * Read header information from EEPROM into global structure. */ @@ -197,6 +208,14 @@ static const struct ddr_data ddr3_data = { .datadldiff0 = PHY_DLL_LOCK_DIFF, }; +static const struct ddr_data ddr3_evm_data = { + .datardsratio0 = MT41J512M8RH125_RD_DQS, + .datawdsratio0 = MT41J512M8RH125_WR_DQS, + .datafwsratio0 = MT41J512M8RH125_PHY_FIFO_WE, + .datawrsratio0 = MT41J512M8RH125_PHY_WR_DATA, + .datadldiff0 = PHY_DLL_LOCK_DIFF, +}; + static const struct cmd_control ddr3_cmd_ctrl_data = { .cmd0csratio = MT41J128MJT125_RATIO, .cmd0dldiff = MT41J128MJT125_DLL_LOCK_DIFF, @@ -211,6 +230,20 @@ static const struct cmd_control ddr3_cmd_ctrl_data = { .cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT, }; +static const struct cmd_control ddr3_evm_cmd_ctrl_data = { + .cmd0csratio = MT41J512M8RH125_RATIO, + .cmd0dldiff = MT41J512M8RH125_DLL_LOCK_DIFF, + .cmd0iclkout = MT41J512M8RH125_INVERT_CLKOUT, + + .cmd1csratio = MT41J512M8RH125_RATIO, + .cmd1dldiff = MT41J512M8RH125_DLL_LOCK_DIFF, + .cmd1iclkout = MT41J512M8RH125_INVERT_CLKOUT, + + .cmd2csratio = MT41J512M8RH125_RATIO, + .cmd2dldiff = MT41J512M8RH125_DLL_LOCK_DIFF, + .cmd2iclkout = MT41J512M8RH125_INVERT_CLKOUT, +}; + static struct emif_regs ddr3_emif_reg_data = { .sdram_config = MT41J128MJT125_EMIF_SDCFG, .ref_ctrl = MT41J128MJT125_EMIF_SDREF, @@ -220,6 +253,16 @@ static struct emif_regs ddr3_emif_reg_data = { .zq_config = MT41J128MJT125_ZQ_CFG, .emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY, }; + +static struct emif_regs ddr3_evm_emif_reg_data = { + .sdram_config = MT41J512M8RH125_EMIF_SDCFG, + .ref_ctrl = MT41J512M8RH125_EMIF_SDREF, + .sdram_tim1 = MT41J512M8RH125_EMIF_TIM1, + .sdram_tim2 = MT41J512M8RH125_EMIF_TIM2, + .sdram_tim3 = MT41J512M8RH125_EMIF_TIM3, + .zq_config = MT41J512M8RH125_ZQ_CFG, + .emif_ddr_phy_ctlr_1 = MT41J512M8RH125_EMIF_READ_LATENCY, +}; #endif /* @@ -301,6 +344,9 @@ void s_init(void) if (board_is_evm_sk() || board_is_bone_lt()) config_ddr(303, MT41J128MJT125_IOCTRL_VALUE, &ddr3_data, &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data); + else if (board_is_evm_15_or_later()) + config_ddr(303, MT41J512M8RH125_IOCTRL_VALUE, &ddr3_evm_data, + &ddr3_evm_cmd_ctrl_data, &ddr3_evm_emif_reg_data); else config_ddr(266, MT47H128M16RT25E_IOCTRL_VALUE, &ddr2_data, &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data); @@ -393,7 +439,7 @@ int board_eth_init(bd_t *bis) uint32_t mac_hi, mac_lo; if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { - debug("<ethaddr> not set. Reading from E-fuse\n"); + printf("<ethaddr> not set. Reading from E-fuse\n"); /* try reading mac address from efuse */ mac_lo = readl(&cdev->macid0l); mac_hi = readl(&cdev->macid0h); @@ -425,6 +471,28 @@ int board_eth_init(bd_t *bis) printf("Error %d registering CPSW switch\n", rv); else n += rv; + + /* + * + * CPSW RGMII Internal Delay Mode is not supported in all PVT + * operating points. So we must set the TX clock delay feature + * in the AR8051 PHY. Since we only support a single ethernet + * device in U-Boot, we only do this for the first instance. + */ +#define AR8051_PHY_DEBUG_ADDR_REG 0x1d +#define AR8051_PHY_DEBUG_DATA_REG 0x1e +#define AR8051_DEBUG_RGMII_CLK_DLY_REG 0x5 +#define AR8051_RGMII_TX_CLK_DLY 0x100 + + if (board_is_evm_sk() || board_is_gp_evm()) { + const char *devname; + devname = miiphy_get_current_dev(); + + miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_ADDR_REG, + AR8051_DEBUG_RGMII_CLK_DLY_REG); + miiphy_write(devname, 0x0, AR8051_PHY_DEBUG_DATA_REG, + AR8051_RGMII_TX_CLK_DLY); + } #endif try_usbether: #if defined(CONFIG_USB_ETHER) && !defined(CONFIG_SPL_BUILD) diff --git a/board/ttcontrol/vision2/imximage_hynix.cfg b/board/ttcontrol/vision2/imximage_hynix.cfg index ed531db..c1de94f 100644 --- a/board/ttcontrol/vision2/imximage_hynix.cfg +++ b/board/ttcontrol/vision2/imximage_hynix.cfg @@ -1,209 +1,228 @@ -# -# (C) Copyright 2009 -# Stefano Babic DENX Software Engineering sbabic@denx.de. -# -# (C) Copyright 2010 -# Klaus Steinhammer TTECH Control Gmbh kst@tttech.com -# -# See file CREDITS for list of people who contributed to this -# project. -# -# This program is free software; you can redistribute it and/or -# modify it under the terms of the GNU General Public License as -# published by the Free Software Foundation; either version 2 of -# the License or (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not write to the Free Software -# Foundation Inc. 51 Franklin Street Fifth Floor Boston, -# MA 02110-1301 USA -# -# Refer docs/README.imxmage for more details about how-to configure -# and create imximage boot image -# -# The syntax is taken as close as possible with the kwbimage - -# Boot Device : one of -# spi, nand, onenand, sd - +/* + * (C) Copyright 2009 + * Stefano Babic DENX Software Engineering sbabic@denx.de. + * + * (C) Copyright 2010 + * Klaus Steinhammer TTECH Control Gmbh kst@tttech.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not write to the Free Software + * Foundation Inc. 51 Franklin Street Fifth Floor Boston, + * MA 02110-1301 USA + * + * Refer docs/README.imxmage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* + * Boot Device : one of + * spi, nand, onenand, sd + */ BOOT_FROM spi -# Device Configuration Data (DCD) -# -# Each entry must have the format: -# Addr-type Address Value -# -# where: -# Addr-type register length (1,2 or 4 bytes) -# Address absolute address of the register -# value value to be stored in the register - -####################### -### Disable WDOG ### -####################### +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ + +/* + * ####################### + * ### Disable WDOG ### + * ####################### + */ DATA 2 0x73f98000 0x30 -####################### -### SET DDR Clk ### -####################### - -# CCM: CBMCR - ddr_clk_sel: axi_b (133MHz) +/* + * ####################### + * ### SET DDR Clk ### + * ####################### + */ +/* CCM: CBMCR - ddr_clk_sel: axi_b (133MHz) */ DATA 4 0x73FD4018 0x000024C0 -# DOUBLE SPI CLK (13MHz->26 MHz Clock) +/* DOUBLE SPI CLK (13MHz->26 MHz Clock) */ DATA 4 0x73FD4038 0x2010241 -#IOMUXC_SW_PAD_CTL_PAD_CSPI1_MOSI HYS_ENABLE | DRV_MAX | SRE_FAST +/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_MOSI HYS_ENABLE | DRV_MAX | SRE_FAST */ DATA 4 0x73fa8600 0x00000107 -#IOMUXC_SW_PAD_CTL_PAD_CSPI1_MISO HYS_ENABLE | DRV_MAX | SRE_FAST +/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_MISO HYS_ENABLE | DRV_MAX | SRE_FAST */ DATA 4 0x73fa8604 0x00000107 -#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS0 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST +/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS0 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST */ DATA 4 0x73fa8608 0x00000187 -#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS1 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST +/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SS1 HYS_ENABLE | PKE_ENABLE | DRV_MAX | SRE_FAST */ DATA 4 0x73fa860c 0x00000187 -#IOMUXC_SW_PAD_CTL_PAD_CSPI1_SCLK HYS_ENABLE | DRV_MAX | SRE_FAST +/* IOMUXC_SW_PAD_CTL_PAD_CSPI1_SCLK HYS_ENABLE | DRV_MAX | SRE_FAST */ DATA 4 0x73fa8614 0x00000107 -#IOMUXC_SW_PAD_CTL_PAD_DI1_PIN11 HYS_ENABLE | DRV_MAX | SRE_FAST (CSPI1_SS2) +/* IOMUXC_SW_PAD_CTL_PAD_DI1_PIN11 HYS_ENABLE | DRV_MAX | SRE_FAST (CSPI1_SS2) */ DATA 4 0x73fa86a8 0x00000187 -####################### -### Settings IOMUXC ### -####################### - -# DDR IOMUX configuration -# Control, Data, Address pads are in their default state: HIGH DS, FAST SR. -# IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK MAX DS +/* + * ####################### + * ### Settings IOMUXC ### + * ####################### + */ +/* + * DDR IOMUX configuration + * Control, Data, Address pads are in their default state: HIGH DS, FAST SR. + * IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK MAX DS + */ DATA 4 0x73fa84b8 0x000000e7 -# PVTC MAX (at GPC, PGR reg) -#DATA 4 0x73FD8004 0x1fc00000 +/* PVTC MAX (at GPC, PGR reg) */ +/* DATA 4 0x73FD8004 0x1fc00000 */ -#DQM0 DS high slew rate slow +/* DQM0 DS high slew rate slow */ DATA 4 0x73fa84d4 0x000000e4 -#DQM1 DS high slew rate slow +/* DQM1 DS high slew rate slow */ DATA 4 0x73fa84d8 0x000000e4 -#DQM2 DS high slew rate slow +/* DQM2 DS high slew rate slow */ DATA 4 0x73fa84dc 0x000000e4 -#DQM3 DS high slew rate slow +/* DQM3 DS high slew rate slow */ DATA 4 0x73fa84e0 0x000000e4 -#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 DS high & SLEW slow +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 DS high & SLEW slow */ DATA 4 0x73fa84bc 0x000000c4 -#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 DS high & SLEW slow +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 DS high & SLEW slow */ DATA 4 0x73fa84c0 0x000000c4 -#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 DS high & SLEW slow +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 DS high & SLEW slow */ DATA 4 0x73fa84c4 0x000000c4 -#IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 DS high & SLEW slow +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 DS high & SLEW slow */ DATA 4 0x73fa84c8 0x000000c4 -#DRAM_DATA B0 +/* DRAM_DATA B0 */ DATA 4 0x73fa88a4 0x00000004 -#DRAM_DATA B1 +/* DRAM_DATA B1 */ DATA 4 0x73fa88ac 0x00000004 -#DRAM_DATA B2 +/* DRAM_DATA B2 */ DATA 4 0x73fa88b8 0x00000004 -#DRAM_DATA B3 +/* DRAM_DATA B3 */ DATA 4 0x73fa882c 0x00000004 -#DRAM_DATA B0 slew rate +/* DRAM_DATA B0 slew rate */ DATA 4 0x73fa8878 0x00000000 -#DRAM_DATA B1 slew rate +/* DRAM_DATA B1 slew rate */ DATA 4 0x73fa8880 0x00000000 -#DRAM_DATA B2 slew rate +/* DRAM_DATA B2 slew rate */ DATA 4 0x73fa888c 0x00000000 -#DRAM_DATA B3 slew rate +/* DRAM_DATA B3 slew rate */ DATA 4 0x73fa889c 0x00000000 -####################### -### Configure SDRAM ### -####################### +/* + * ####################### + * ### Configure SDRAM ### + * ####################### + */ -# Configure CS0 -####################### +/* Configure CS0 */ +/* ####################### */ -# ESDCTL0: Enable controller +/* ESDCTL0: Enable controller */ DATA 4 0x83fd9000 0x83220000 -# Init DRAM on CS0 -# ESDSCR: Precharge command +/* Init DRAM on CS0 / +/* ESDSCR: Precharge command */ DATA 4 0x83fd9014 0x04008008 -# ESDSCR: Refresh command +/* ESDSCR: Refresh command */ DATA 4 0x83fd9014 0x00008010 -# ESDSCR: Refresh command +/* ESDSCR: Refresh command */ DATA 4 0x83fd9014 0x00008010 -# ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8) +/* ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8) */ DATA 4 0x83fd9014 0x00338018 -# ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51) +/* ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51) */ DATA 4 0x83fd9014 0x0020801a -# ESDSCR +/* ESDSCR */ DATA 4 0x83fd9014 0x00008000 -# ESDSCR: EMR with full Drive strength -#DATA 4 0x83fd9014 0x0000801a +/* ESDSCR: EMR with full Drive strength */ +/* DATA 4 0x83fd9014 0x0000801a */ -# ESDCTL0: 14 ROW, 10 COL, 32Bit, SREF=8 +/* ESDCTL0: 14 ROW, 10 COL, 32Bit, SREF=8 */ DATA 4 0x83fd9000 0xC3220000 -# ESDCFG0: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks -# tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks -#DATA 4 0x83fd9004 0xC33574AA - -#micron mDDR -# ESDCFG0: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks -# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks -#DATA 4 0x83FD9004 0x101564a8 - -#hynix mDDR -# ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks -# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks +/* + * ESDCFG0: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks + * tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks + * DATA 4 0x83fd9004 0xC33574AA + */ +/* + * micron mDDR + * ESDCFG0: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks + * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks + * DATA 4 0x83FD9004 0x101564a8 + */ +/* + * hynix mDDR + * ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks + * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks + */ DATA 4 0x83FD9004 0x704564a8 -# ESDMISC: AP=10, Bank interleaving on, MIF3 en, RALAT=2 +/* ESDMISC: AP=10, Bank interleaving on, MIF3 en, RALAT=2 */ DATA 4 0x83fd9010 0x000a1700 -# Configure CS1 -####################### +/* Configure CS1 */ +/* ####################### */ -# ESDCTL1: Enable controller +/* ESDCTL1: Enable controller */ DATA 4 0x83fd9008 0x83220000 -# Init DRAM on CS1 -# ESDSCR: Precharge command +/* Init DRAM on CS1 */ +/* ESDSCR: Precharge command */ DATA 4 0x83fd9014 0x0400800c -# ESDSCR: Refresh command +/* ESDSCR: Refresh command */ DATA 4 0x83fd9014 0x00008014 -# ESDSCR: Refresh command +/* ESDSCR: Refresh command */ DATA 4 0x83fd9014 0x00008014 -# ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8) +/* ESDSCR: LMR with CAS=3 and BL=3 (Burst Length = 8) */ DATA 4 0x83fd9014 0x0033801c -# ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51) +/* ESDSCR: EMR with half Drive strength (= medium strength @ i.MX51) */ DATA 4 0x83fd9014 0x0020801e -# ESDSCR +/* ESDSCR */ DATA 4 0x83fd9014 0x00008004 -# ESDCTL1: 14 ROW, 10 COL, 32Bit, SREF=8 +/* ESDCTL1: 14 ROW, 10 COL, 32Bit, SREF=8 */ DATA 4 0x83fd9008 0xC3220000 - -# ESDCFG1: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks -# tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks -#DATA 4 0x83fd900c 0xC33574AA - -#micron mDDR -# ESDCFG1: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks -# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks -#DATA 4 0x83FD900C 0x101564a8 - -#hynix mDDR -# ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks -# tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks +/* + * ESDCFG1: tRFC:22clks, tXSR:28clks, tXP:2clks, tWTR:2clk, tRP:3clks, tMRD:2clks + * tRAS:8clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:11clks + * DATA 4 0x83fd900c 0xC33574AA + */ +/* + * micron mDDR + * ESDCFG1: tRFC:11clks, tXSR:19clks, tXP:1clks, tWTR:2clk, tRP:3clks, tMRD:2clks + * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks + * DATA 4 0x83FD900C 0x101564a8 + */ +/* + * hynix mDDR + * ESDCFG0: tRFC:17clks, tXSR:21clks, tXP:3clks, tWTR:1clk, tRP:3clks, tMRD:2clks + * tRAS:7clks, tRRD:2clks, tWR:3clks, tRCD:3clks, tRC:9clks + */ DATA 4 0x83FD900C 0x704564a8 -# ESDSCR (mDRAM configuration finished) +/* ESDSCR (mDRAM configuration finished) */ DATA 4 0x83FD9014 0x00000004 -# ESDSCR - clear "configuration request" bit +/* ESDSCR - clear "configuration request" bit */ DATA 4 0x83fd9014 0x00000000 diff --git a/board/woodburn/imximage.cfg b/board/woodburn/imximage.cfg index b4cc8ec..ba42a5e 100644 --- a/board/woodburn/imximage.cfg +++ b/board/woodburn/imximage.cfg @@ -1,4 +1,4 @@ BOOT_FROM sd -# DDR2 init +/* DDR2 init */ DATA 4 0xB8001010 0x00000304 diff --git a/board/woodburn/woodburn.c b/board/woodburn/woodburn.c index d74f360..5b044a9 100644 --- a/board/woodburn/woodburn.c +++ b/board/woodburn/woodburn.c @@ -241,9 +241,10 @@ int board_mmc_init(bd_t *bis) mxc_iomux_set_input(MUX_IN_GPIO1_IN_7, 0x1); gpio_direction_input(GPIO_MMC_CD); + /* MMC Write Protection on GPIO1_8 */ mxc_request_iomux(MX35_PIN_FST, MUX_CONFIG_ALT5); mxc_iomux_set_input(MUX_IN_GPIO1_IN_8, 0x1); - gpio_direction_output(GPIO_MMC_WP, 0); + gpio_direction_input(GPIO_MMC_WP); esdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK); |