diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/ti/am335x/Makefile | 2 | ||||
| -rw-r--r-- | board/ti/am335x/evm.c | 199 |
2 files changed, 1 insertions, 200 deletions
diff --git a/board/ti/am335x/Makefile b/board/ti/am335x/Makefile index d58b185..e3609bc 100644 --- a/board/ti/am335x/Makefile +++ b/board/ti/am335x/Makefile @@ -18,7 +18,7 @@ include $(TOPDIR)/config.mk LIB = $(obj)lib$(BOARD).o -COBJS := evm.o mux.o +COBJS := mux.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/ti/am335x/evm.c b/board/ti/am335x/evm.c deleted file mode 100644 index b7eee80..0000000 --- a/board/ti/am335x/evm.c +++ /dev/null @@ -1,199 +0,0 @@ -/* - * evm.c - * - * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <common.h> -#include <errno.h> -#include <asm/io.h> -#include <asm/arch/cpu.h> -#include <asm/arch/hardware.h> -#include <asm/arch/common_def.h> -#include <i2c.h> -#include <miiphy.h> -#include <cpsw.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define UART_RESET (0x1 << 1) -#define UART_CLK_RUNNING_MASK 0x1 -#define UART_SMART_IDLE_EN (0x1 << 0x3) - -/* MII mode defines */ -#define MII_MODE_ENABLE 0x0 -#define RGMII_MODE_ENABLE 0xA - -struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; - -/* - * I2C Address of on-board EEPROM - */ -#define I2C_BASE_BOARD_ADDR 0x50 - -#define NO_OF_MAC_ADDR 3 -#define ETH_ALEN 6 - -#define NAME_LEN 8 - -struct am335x_baseboard_id { - unsigned int magic; - char name[NAME_LEN]; - char version[4]; - char serial[12]; - char config[32]; - char mac_addr[NO_OF_MAC_ADDR][ETH_ALEN]; -}; - -static struct am335x_baseboard_id header; - -static inline int board_is_bone(void) -{ - return !strncmp(header.name, "A335BONE", NAME_LEN); -} - -/* - * Read header information from EEPROM into global structure. - */ -int read_eeprom(void) -{ - /* Check if baseboard eeprom is available */ - if (i2c_probe(I2C_BASE_BOARD_ADDR)) { - printf("Could not probe the EEPROM; something fundamentally " - "wrong on the I2C bus.\n"); - return -ENODEV; - } - - /* read the eeprom using i2c */ - if (i2c_read(I2C_BASE_BOARD_ADDR, 0, 2, (uchar *)&header, - sizeof(header))) { - printf("Could not read the EEPROM; something fundamentally" - " wrong on the I2C bus.\n"); - return -EIO; - } - - if (header.magic != 0xEE3355AA) { - /* - * read the eeprom using i2c again, - * but use only a 1 byte address - */ - if (i2c_read(I2C_BASE_BOARD_ADDR, 0, 1, (uchar *)&header, - sizeof(header))) { - printf("Could not read the EEPROM; something " - "fundamentally wrong on the I2C bus.\n"); - return -EIO; - } - - if (header.magic != 0xEE3355AA) { - printf("Incorrect magic number in EEPROM\n"); - return -EINVAL; - } - } - - return 0; -} - -/* - * Basic board specific setup - */ -int board_init(void) -{ - enable_uart0_pin_mux(); - - enable_i2c0_pin_mux(); - enable_i2c1_pin_mux(); - i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - if (read_eeprom() < 0) - printf("Could not get board ID.\n"); - - gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100; - - return 0; -} - -#ifdef CONFIG_DRIVER_TI_CPSW -static void cpsw_control(int enabled) -{ - /* VTP can be added here */ - - return; -} - -static struct cpsw_slave_data cpsw_slaves[] = { - { - .slave_reg_ofs = 0x208, - .sliver_reg_ofs = 0xd80, - .phy_id = 0, - }, - { - .slave_reg_ofs = 0x308, - .sliver_reg_ofs = 0xdc0, - .phy_id = 1, - }, -}; - -static struct cpsw_platform_data cpsw_data = { - .mdio_base = AM335X_CPSW_MDIO_BASE, - .cpsw_base = AM335X_CPSW_BASE, - .mdio_div = 0xff, - .channels = 8, - .cpdma_reg_ofs = 0x800, - .slaves = 1, - .slave_data = cpsw_slaves, - .ale_reg_ofs = 0xd00, - .ale_entries = 1024, - .host_port_reg_ofs = 0x108, - .hw_stats_reg_ofs = 0x900, - .mac_control = (1 << 5), - .control = cpsw_control, - .host_port_num = 0, - .version = CPSW_CTRL_VERSION_2, -}; - -int board_eth_init(bd_t *bis) -{ - uint8_t mac_addr[6]; - uint32_t mac_hi, mac_lo; - - if (!eth_getenv_enetaddr("ethaddr", mac_addr)) { - debug("<ethaddr> not set. Reading from E-fuse\n"); - /* try reading mac address from efuse */ - mac_lo = readl(&cdev->macid0l); - mac_hi = readl(&cdev->macid0h); - mac_addr[0] = mac_hi & 0xFF; - mac_addr[1] = (mac_hi & 0xFF00) >> 8; - mac_addr[2] = (mac_hi & 0xFF0000) >> 16; - mac_addr[3] = (mac_hi & 0xFF000000) >> 24; - mac_addr[4] = mac_lo & 0xFF; - mac_addr[5] = (mac_lo & 0xFF00) >> 8; - - if (is_valid_ether_addr(mac_addr)) - eth_setenv_enetaddr("ethaddr", mac_addr); - else - return -1; - } - - if (board_is_bone()) { - enable_mii1_pin_mux(); - writel(MII_MODE_ENABLE, &cdev->miisel); - cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = - PHY_INTERFACE_MODE_MII; - } else { - enable_rgmii1_pin_mux(); - writel(RGMII_MODE_ENABLE, &cdev->miisel); - cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if = - PHY_INTERFACE_MODE_RGMII; - } - - return cpsw_register(&cpsw_data); -} -#endif |