summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/davedenx/qong/qong.c20
-rw-r--r--board/freescale/mx51evk/mx51evk.c143
-rw-r--r--board/karo/tx25/tx25.c3
3 files changed, 164 insertions, 2 deletions
diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c
index eb9218e..781333b 100644
--- a/board/davedenx/qong/qong.c
+++ b/board/davedenx/qong/qong.c
@@ -26,6 +26,7 @@
#include <asm/arch/mx31.h>
#include <asm/arch/mx31-regs.h>
#include <nand.h>
+#include <fsl_pmic.h>
#include "qong_fpga.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -128,6 +129,13 @@ int board_init (void)
mx31_gpio_mux(MUX_RTS1__UART1_RTS_B);
mx31_gpio_mux(MUX_CTS1__UART1_CTS_B);
+ /* setup pins for SPI (pmic) */
+ mx31_gpio_mux(MUX_CSPI2_SS0__CSPI2_SS0_B);
+ mx31_gpio_mux(MUX_CSPI2_MOSI__CSPI2_MOSI);
+ mx31_gpio_mux(MUX_CSPI2_MISO__CSPI2_MISO);
+ mx31_gpio_mux(MUX_CSPI2_SCLK__CSPI2_CLK);
+ mx31_gpio_mux(MUX_CSPI2_SPI_RDY__CSPI2_DATAREADY_B);
+
/* board id for linux */
gd->bd->bi_arch_number = MACH_TYPE_QONG;
gd->bd->bi_boot_params = (0x80000100); /* adress of boot parameters */
@@ -135,6 +143,18 @@ int board_init (void)
return 0;
}
+int board_late_init(void)
+{
+ u32 val;
+
+ /* Enable RTC battery */
+ val = pmic_reg_read(REG_POWER_CTL0);
+ pmic_reg_write(REG_POWER_CTL0, val | COINCHEN);
+ pmic_reg_write(REG_INT_STATUS1, RTCRSTI);
+
+ return 0;
+}
+
int checkboard (void)
{
printf("Board: DAVE/DENX Qong\n");
diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c
index f0b7abc..75d642b 100644
--- a/board/freescale/mx51evk/mx51evk.c
+++ b/board/freescale/mx51evk/mx51evk.c
@@ -27,9 +27,12 @@
#include <asm/arch/iomux.h>
#include <asm/errno.h>
#include <asm/arch/sys_proto.h>
+#include <asm/arch/crm_regs.h>
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc.h>
+#include <fsl_pmic.h>
+#include <mc13892.h>
#include "mx51evk.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -39,8 +42,8 @@ struct io_board_ctrl *mx51_io_board;
#ifdef CONFIG_FSL_ESDHC
struct fsl_esdhc_cfg esdhc_cfg[2] = {
- {MMC_SDHC1_BASE_ADDR, 1, 1},
- {MMC_SDHC2_BASE_ADDR, 1, 1},
+ {MMC_SDHC1_BASE_ADDR, 1},
+ {MMC_SDHC2_BASE_ADDR, 1},
};
#endif
@@ -147,6 +150,130 @@ static void setup_iomux_fec(void)
mxc_iomux_set_pad(MX51_PIN_NANDF_D11, 0x2180);
}
+#ifdef CONFIG_MXC_SPI
+static void setup_iomux_spi(void)
+{
+ /* 000: Select mux mode: ALT0 mux port: MOSI of instance: ecspi1 */
+ mxc_request_iomux(MX51_PIN_CSPI1_MOSI, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_CSPI1_MOSI, 0x105);
+
+ /* 000: Select mux mode: ALT0 mux port: MISO of instance: ecspi1. */
+ mxc_request_iomux(MX51_PIN_CSPI1_MISO, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_CSPI1_MISO, 0x105);
+
+ /* de-select SS1 of instance: ecspi1. */
+ mxc_request_iomux(MX51_PIN_CSPI1_SS1, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX51_PIN_CSPI1_SS1, 0x85);
+
+ /* 000: Select mux mode: ALT0 mux port: SS0 ecspi1 */
+ mxc_request_iomux(MX51_PIN_CSPI1_SS0, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_CSPI1_SS0, 0x185);
+
+ /* 000: Select mux mode: ALT0 mux port: RDY of instance: ecspi1. */
+ mxc_request_iomux(MX51_PIN_CSPI1_RDY, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_CSPI1_RDY, 0x180);
+
+ /* 000: Select mux mode: ALT0 mux port: SCLK of instance: ecspi1. */
+ mxc_request_iomux(MX51_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX51_PIN_CSPI1_SCLK, 0x105);
+}
+#endif
+
+static void power_init(void)
+{
+ unsigned int val;
+ unsigned int reg;
+ struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE;
+
+ /* Write needed to Power Gate 2 register */
+ val = pmic_reg_read(REG_POWER_MISC);
+ val &= ~PWGT2SPIEN;
+ pmic_reg_write(REG_POWER_MISC, val);
+
+ /* Write needed to update Charger 0 */
+ pmic_reg_write(REG_CHARGE, VCHRG0 | VCHRG1 | VCHRG2 |
+ ICHRG0 | ICHRG1 | ICHRG2 | ICHRG3 | ICHRGTR0 |
+ OVCTRL1 | UCHEN | CHRGLEDEN | CYCLB);
+
+ /* power up the system first */
+ pmic_reg_write(REG_POWER_MISC, PWUP);
+
+ /* Set core voltage to 1.1V */
+ val = pmic_reg_read(REG_SW_0);
+ val = (val & (~0x1F)) | 0x14;
+ pmic_reg_write(REG_SW_0, val);
+
+ /* Setup VCC (SW2) to 1.25 */
+ val = pmic_reg_read(REG_SW_1);
+ val = (val & (~0x1F)) | 0x1A;
+ pmic_reg_write(REG_SW_1, val);
+
+ /* Setup 1V2_DIG1 (SW3) to 1.25 */
+ val = pmic_reg_read(REG_SW_2);
+ val = (val & (~0x1F)) | 0x1A;
+ pmic_reg_write(REG_SW_2, val);
+ udelay(50);
+
+ /* Raise the core frequency to 800MHz */
+ writel(0x0, &mxc_ccm->cacrr);
+
+ /* Set switchers in Auto in NORMAL mode & STANDBY mode */
+ /* Setup the switcher mode for SW1 & SW2*/
+ val = pmic_reg_read(REG_SW_4);
+ val = (val & ~((SWMODE_MASK << SWMODE1_SHIFT) |
+ (SWMODE_MASK << SWMODE2_SHIFT)));
+ val |= (SWMODE_AUTO_AUTO << SWMODE1_SHIFT) |
+ (SWMODE_AUTO_AUTO << SWMODE2_SHIFT);
+ pmic_reg_write(REG_SW_4, val);
+
+ /* Setup the switcher mode for SW3 & SW4 */
+ val = pmic_reg_read(REG_SW_5);
+ val = (val & ~((SWMODE_MASK << SWMODE3_SHIFT) |
+ (SWMODE_MASK << SWMODE4_SHIFT)));
+ val |= (SWMODE_AUTO_AUTO << SWMODE3_SHIFT) |
+ (SWMODE_AUTO_AUTO << SWMODE4_SHIFT);
+ pmic_reg_write(REG_SW_5, val);
+
+ /* Set VDIG to 1.65V, VGEN3 to 1.8V, VCAM to 2.6V */
+ val = pmic_reg_read(REG_SETTING_0);
+ val &= ~(VCAM_MASK | VGEN3_MASK | VDIG_MASK);
+ val |= VDIG_1_65 | VGEN3_1_8 | VCAM_2_6;
+ pmic_reg_write(REG_SETTING_0, val);
+
+ /* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */
+ val = pmic_reg_read(REG_SETTING_1);
+ val &= ~(VVIDEO_MASK | VSD_MASK | VAUDIO_MASK);
+ val |= VSD_3_15 | VAUDIO_3_0 | VVIDEO_2_775;
+ pmic_reg_write(REG_SETTING_1, val);
+
+ /* Configure VGEN3 and VCAM regulators to use external PNP */
+ val = VGEN3CONFIG | VCAMCONFIG;
+ pmic_reg_write(REG_MODE_1, val);
+ udelay(200);
+
+ reg = readl(GPIO2_BASE_ADDR + 0x0);
+ reg &= ~0x4000; /* Lower reset line */
+ writel(reg, GPIO2_BASE_ADDR + 0x0);
+
+ reg = readl(GPIO2_BASE_ADDR + 0x4);
+ reg |= 0x4000; /* configure GPIO lines as output */
+ writel(reg, GPIO2_BASE_ADDR + 0x4);
+
+ /* Reset the ethernet controller over GPIO */
+ writel(0x1, IOMUXC_BASE_ADDR + 0x0AC);
+
+ /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */
+ val = VGEN3EN | VGEN3CONFIG | VCAMEN | VCAMCONFIG |
+ VVIDEOEN | VAUDIOEN | VSDEN;
+ pmic_reg_write(REG_MODE_1, val);
+
+ udelay(500);
+
+ reg = readl(GPIO2_BASE_ADDR + 0x0);
+ reg |= 0x4000;
+ writel(reg, GPIO2_BASE_ADDR + 0x0);
+}
+
#ifdef CONFIG_FSL_ESDHC
int board_mmc_getcd(u8 *cd, struct mmc *mmc)
{
@@ -284,9 +411,21 @@ int board_init(void)
setup_iomux_uart();
setup_iomux_fec();
+
return 0;
}
+#ifdef BOARD_LATE_INIT
+int board_late_init(void)
+{
+#ifdef CONFIG_MXC_SPI
+ setup_iomux_spi();
+ power_init();
+#endif
+ return 0;
+}
+#endif
+
int checkboard(void)
{
puts("Board: MX51EVK ");
diff --git a/board/karo/tx25/tx25.c b/board/karo/tx25/tx25.c
index 4d6a96d..2608698 100644
--- a/board/karo/tx25/tx25.c
+++ b/board/karo/tx25/tx25.c
@@ -145,6 +145,9 @@ int board_init()
mx25_uart_init_pins();
#endif
+ /* board id for linux */
+ gd->bd->bi_arch_number = MACH_TYPE_TX25;
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
}