summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rwxr-xr-xboard/armltd/integratorap/split_by_variant.sh18
-rw-r--r--board/omap3/beagle/beagle.c20
-rw-r--r--board/omap3/evm/evm.c16
-rw-r--r--board/omap3/overo/overo.c12
-rw-r--r--board/omap3/overo/overo.h9
-rw-r--r--board/omap3/pandora/pandora.c12
-rw-r--r--board/omap3/zoom1/zoom1.c12
-rw-r--r--board/samsung/smdk6400/lowlevel_init.S7
8 files changed, 63 insertions, 43 deletions
diff --git a/board/armltd/integratorap/split_by_variant.sh b/board/armltd/integratorap/split_by_variant.sh
index 51dc53f..2c9fe2e 100755
--- a/board/armltd/integratorap/split_by_variant.sh
+++ b/board/armltd/integratorap/split_by_variant.sh
@@ -84,8 +84,8 @@ else
esac
fi
-if [ "$cpu" = "arm_intcm" ]
-then
+case "$cpu" in
+ arm_intcm)
echo "/* Core module undefined/not ported */" >> tmp.fil
echo "#define CONFIG_ARM_INTCM 1" >> tmp.fil
echo -n "#undef CONFIG_CM_MULTIPLE_SSRAM" >> tmp.fil
@@ -102,7 +102,19 @@ then
echo "initialization reg */" >> tmp.fil
echo -n "#undef CONFIG_CM_TCRAM " >> tmp.fil
echo " /* CM may not have TCRAM */" >> tmp.fil
-fi
+ echo -n " /* May not be processor " >> tmp.fil
+ echo "without cache support */" >> tmp.fil
+ echo "#define CONFIG_SYS_NO_ICACHE 1" >> tmp.fil
+ echo "#define CONFIG_SYS_NO_DCACHE 1" >> tmp.fil
+ ;;
+
+ arm720t)
+ echo -n " /* May not be processor " >> tmp.fil
+ echo "without cache support */" >> tmp.fil
+ echo "#define CONFIG_SYS_NO_ICACHE 1" >> tmp.fil
+ echo "#define CONFIG_SYS_NO_DCACHE 1" >> tmp.fil
+ ;;
+esac
mkdir -p ${obj}include
mkdir -p ${obj}board/armltd/integratorap
diff --git a/board/omap3/beagle/beagle.c b/board/omap3/beagle/beagle.c
index 8d60651..cc8e2f9 100644
--- a/board/omap3/beagle/beagle.c
+++ b/board/omap3/beagle/beagle.c
@@ -38,10 +38,10 @@
static int beagle_revision_c;
-/******************************************************************************
+/*
* Routine: board_init
* Description: Early hardware init.
- *****************************************************************************/
+ */
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
@@ -55,23 +55,23 @@ int board_init(void)
return 0;
}
-/******************************************************************************
+/*
* Routine: beagle_get_revision
* Description: Return revision of the BeagleBoard this code is running on.
* If it is a revision Ax/Bx board, this function returns 0,
* on a revision C board you will get a 1.
- *****************************************************************************/
+ */
int beagle_get_revision(void)
{
return beagle_revision_c;
}
-/******************************************************************************
+/*
* Routine: beagle_identify
* Description: Detect if we are running on a Beagle revision Ax/Bx or
* Cx. This can be done by GPIO_171. If this is low, we are
* running on a revision C board.
- *****************************************************************************/
+ */
void beagle_identify(void)
{
gpio_t *gpio6_base = (gpio_t *)OMAP34XX_GPIO6_BASE;
@@ -92,10 +92,10 @@ void beagle_identify(void)
}
}
-/******************************************************************************
+/*
* Routine: misc_init_r
* Description: Configure board specific parts
- *****************************************************************************/
+ */
int misc_init_r(void)
{
gpio_t *gpio5_base = (gpio_t *)OMAP34XX_GPIO5_BASE;
@@ -121,12 +121,12 @@ int misc_init_r(void)
return 0;
}
-/******************************************************************************
+/*
* Routine: set_muxconf_regs
* Description: Setting up the configuration Mux registers specific to the
* hardware. Many pins need to be moved from protect to primary
* mode.
- *****************************************************************************/
+ */
void set_muxconf_regs(void)
{
MUX_BEAGLE();
diff --git a/board/omap3/evm/evm.c b/board/omap3/evm/evm.c
index 3a27c8f..c008c2e 100644
--- a/board/omap3/evm/evm.c
+++ b/board/omap3/evm/evm.c
@@ -36,10 +36,10 @@
#include <asm/mach-types.h>
#include "evm.h"
-/******************************************************************************
+/*
* Routine: board_init
* Description: Early hardware init.
- *****************************************************************************/
+ */
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
@@ -53,10 +53,10 @@ int board_init(void)
return 0;
}
-/******************************************************************************
+/*
* Routine: misc_init_r
* Description: Init ethernet (done here so udelay works)
- *****************************************************************************/
+ */
int misc_init_r(void)
{
@@ -73,22 +73,22 @@ int misc_init_r(void)
return 0;
}
-/******************************************************************************
+/*
* Routine: set_muxconf_regs
* Description: Setting up the configuration Mux registers specific to the
* hardware. Many pins need to be moved from protect to primary
* mode.
- *****************************************************************************/
+ */
void set_muxconf_regs(void)
{
MUX_EVM();
}
-/******************************************************************************
+/*
* Routine: setup_net_chip
* Description: Setting up the configuration GPMC registers specific to the
* Ethernet hardware.
- *****************************************************************************/
+ */
static void setup_net_chip(void)
{
gpio_t *gpio3_base = (gpio_t *)OMAP34XX_GPIO3_BASE;
diff --git a/board/omap3/overo/overo.c b/board/omap3/overo/overo.c
index 37bf350..809b77b 100644
--- a/board/omap3/overo/overo.c
+++ b/board/omap3/overo/overo.c
@@ -35,10 +35,10 @@
#include <asm/mach-types.h>
#include "overo.h"
-/******************************************************************************
+/*
* Routine: board_init
* Description: Early hardware init.
- *****************************************************************************/
+ */
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
@@ -52,10 +52,10 @@ int board_init(void)
return 0;
}
-/******************************************************************************
+/*
* Routine: misc_init_r
* Description: Configure board specific parts
- *****************************************************************************/
+ */
int misc_init_r(void)
{
power_init_r();
@@ -65,12 +65,12 @@ int misc_init_r(void)
return 0;
}
-/******************************************************************************
+/*
* Routine: set_muxconf_regs
* Description: Setting up the configuration Mux registers specific to the
* hardware. Many pins need to be moved from protect to primary
* mode.
- *****************************************************************************/
+ */
void set_muxconf_regs(void)
{
MUX_OVERO();
diff --git a/board/omap3/overo/overo.h b/board/omap3/overo/overo.h
index 71de3f1..e8ccc1d 100644
--- a/board/omap3/overo/overo.h
+++ b/board/omap3/overo/overo.h
@@ -185,6 +185,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(CSI2_DX0), (IEN | PTD | DIS | M0)) /*CSI2_DX0*/\
MUX_VAL(CP(CSI2_DY0), (IEN | PTD | DIS | M0)) /*CSI2_DY0*/\
MUX_VAL(CP(CSI2_DX1), (IEN | PTD | EN | M4)) /*GPIO_114*/\
+ /* - PEN_DOWN*/\
MUX_VAL(CP(CSI2_DY1), (IEN | PTU | EN | M4)) /*GPIO_115*/\
/*Audio Interface */\
MUX_VAL(CP(MCBSP2_FSX), (IEN | PTD | DIS | M0)) /*McBSP2_FSX*/\
@@ -295,7 +296,7 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(SYS_CLKOUT2), (IEN | PTU | EN | M4)) /*GPIO_186*/\
MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | EN | M2)) /*MMC3_CLK*/\
MUX_VAL(CP(ETK_CTL_ES2), (IEN | PTU | EN | M2)) /*MMC3_CMD*/\
- MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT4*/\
+ MUX_VAL(CP(ETK_D0_ES2), (IEN | PTU | EN | M4)) /*GPIO_14*/\
MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M4)) /*GPIO_15 - X_GATE*/\
MUX_VAL(CP(ETK_D2_ES2), (IEN | PTU | EN | M4)) /*GPIO_16*/\
/* - W2W_NRESET*/\
@@ -303,9 +304,9 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(ETK_D4_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT0*/\
MUX_VAL(CP(ETK_D5_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT1*/\
MUX_VAL(CP(ETK_D6_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT2*/\
- MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT7*/\
- MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT6*/\
- MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | EN | M2)) /*MMC3_DAT5*/\
+ MUX_VAL(CP(ETK_D7_ES2), (IEN | PTU | EN | M4)) /*GPIO_21*/\
+ MUX_VAL(CP(ETK_D8_ES2), (IEN | PTU | EN | M4)) /*GPIO_22*/\
+ MUX_VAL(CP(ETK_D9_ES2), (IEN | PTU | EN | M4)) /*GPIO_23*/\
MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_CLK*/\
MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTD | DIS | M3)) /*HSUSB2_STP*/\
MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M3)) /*HSUSB2_DIR*/\
diff --git a/board/omap3/pandora/pandora.c b/board/omap3/pandora/pandora.c
index dfd51ec..c2f98ea 100644
--- a/board/omap3/pandora/pandora.c
+++ b/board/omap3/pandora/pandora.c
@@ -36,10 +36,10 @@
#include <asm/mach-types.h>
#include "pandora.h"
-/******************************************************************************
+/*
* Routine: board_init
* Description: Early hardware init.
- *****************************************************************************/
+ */
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
@@ -53,10 +53,10 @@ int board_init(void)
return 0;
}
-/******************************************************************************
+/*
* Routine: misc_init_r
* Description: Configure board specific parts
- *****************************************************************************/
+ */
int misc_init_r(void)
{
gpio_t *gpio1_base = (gpio_t *)OMAP34XX_GPIO1_BASE;
@@ -82,12 +82,12 @@ int misc_init_r(void)
return 0;
}
-/******************************************************************************
+/*
* Routine: set_muxconf_regs
* Description: Setting up the configuration Mux registers specific to the
* hardware. Many pins need to be moved from protect to primary
* mode.
- *****************************************************************************/
+ */
void set_muxconf_regs(void)
{
MUX_PANDORA();
diff --git a/board/omap3/zoom1/zoom1.c b/board/omap3/zoom1/zoom1.c
index 702f732..db4d087 100644
--- a/board/omap3/zoom1/zoom1.c
+++ b/board/omap3/zoom1/zoom1.c
@@ -37,10 +37,10 @@
#include <asm/mach-types.h>
#include "zoom1.h"
-/******************************************************************************
+/*
* Routine: board_init
* Description: Early hardware init.
- *****************************************************************************/
+ */
int board_init(void)
{
DECLARE_GLOBAL_DATA_PTR;
@@ -54,10 +54,10 @@ int board_init(void)
return 0;
}
-/******************************************************************************
+/*
* Routine: misc_init_r
* Description: Configure zoom board specific configurations
- *****************************************************************************/
+ */
int misc_init_r(void)
{
power_init_r();
@@ -65,12 +65,12 @@ int misc_init_r(void)
return 0;
}
-/******************************************************************************
+/*
* Routine: set_muxconf_regs
* Description: Setting up the configuration Mux registers specific to the
* hardware. Many pins need to be moved from protect to primary
* mode.
- *****************************************************************************/
+ */
void set_muxconf_regs(void)
{
/* platform specific muxes */
diff --git a/board/samsung/smdk6400/lowlevel_init.S b/board/samsung/smdk6400/lowlevel_init.S
index e0119a7..47f72f6 100644
--- a/board/samsung/smdk6400/lowlevel_init.S
+++ b/board/samsung/smdk6400/lowlevel_init.S
@@ -104,6 +104,13 @@ lowlevel_init:
bl nand_asm_init
#endif
+ /* Memory subsystem address 0x7e00f120 */
+ ldr r0, =ELFIN_MEM_SYS_CFG
+
+ /* Xm0CSn2 = NFCON CS0, Xm0CSn3 = NFCON CS1 */
+ mov r1, #S3C64XX_MEM_SYS_CFG_NAND
+ str r1, [r0]
+
bl mem_ctrl_asm_init
/* Wakeup support. Don't know if it's going to be used, untested. */