summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/samsung/smdk6400/.gitignore5
-rw-r--r--board/samsung/smdk6400/Makefile48
-rw-r--r--board/samsung/smdk6400/config.mk30
-rw-r--r--board/samsung/smdk6400/lowlevel_init.S323
-rw-r--r--board/samsung/smdk6400/smdk6400.c134
-rw-r--r--board/samsung/smdk6400/smdk6400_nand_spl.c36
-rw-r--r--board/samsung/smdk6400/u-boot-nand.lds90
7 files changed, 0 insertions, 666 deletions
diff --git a/board/samsung/smdk6400/.gitignore b/board/samsung/smdk6400/.gitignore
deleted file mode 100644
index 25ab492..0000000
--- a/board/samsung/smdk6400/.gitignore
+++ /dev/null
@@ -1,5 +0,0 @@
-#
-# Generated files
-#
-
-/config.tmp
diff --git a/board/samsung/smdk6400/Makefile b/board/samsung/smdk6400/Makefile
deleted file mode 100644
index 0d3e63b..0000000
--- a/board/samsung/smdk6400/Makefile
+++ /dev/null
@@ -1,48 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2008
-# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).o
-
-COBJS-y := smdk6400.o
-SOBJS := lowlevel_init.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS-y))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(SOBJS) $(OBJS)
- $(call cmd_link_o_target, $(SOBJS) $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/samsung/smdk6400/config.mk b/board/samsung/smdk6400/config.mk
deleted file mode 100644
index 6f04c2f..0000000
--- a/board/samsung/smdk6400/config.mk
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-# David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
-#
-# (C) Copyright 2008
-# Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
-#
-# SAMSUNG SMDK6400 board with mDirac3 (ARM1176) cpu
-#
-# see http://www.samsung.com/ for more information on SAMSUNG
-
-# On SMDK6400 we use the 64 MB SDRAM bank at
-#
-# 0x50000000 to 0x58000000
-#
-# Linux-Kernel is expected to be at 0x50008000, entry 0x50008000
-#
-# we load ourselves to 0x57e00000 without MMU
-# with MMU, load address is changed to 0xc7e00000
-#
-# download area is 0x5000c000
-
-sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-
-ifndef CONFIG_NAND_SPL
-CONFIG_SYS_TEXT_BASE = $(RAM_TEXT)
-else
-CONFIG_SYS_TEXT_BASE = 0
-endif
diff --git a/board/samsung/smdk6400/lowlevel_init.S b/board/samsung/smdk6400/lowlevel_init.S
deleted file mode 100644
index f7ce176..0000000
--- a/board/samsung/smdk6400/lowlevel_init.S
+++ /dev/null
@@ -1,323 +0,0 @@
-/*
- * Memory Setup stuff - taken from blob memsetup.S
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
- * Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
- *
- * Modified for the Samsung SMDK2410 by
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2008
- * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <version.h>
-
-#include <asm/arch/s3c6400.h>
-
-#ifdef CONFIG_SERIAL1
-#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART0_OFFSET)
-#elif defined(CONFIG_SERIAL2)
-#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART1_OFFSET)
-#else
-#define ELFIN_UART_CONSOLE_BASE (ELFIN_UART_BASE + ELFIN_UART2_OFFSET)
-#endif
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE
-
- .globl lowlevel_init
-lowlevel_init:
- mov r12, lr
-
- /* LED on only #8 */
- ldr r0, =ELFIN_GPIO_BASE
- ldr r1, =0x55540000
- str r1, [r0, #GPNCON_OFFSET]
-
- ldr r1, =0x55555555
- str r1, [r0, #GPNPUD_OFFSET]
-
- ldr r1, =0xf000
- str r1, [r0, #GPNDAT_OFFSET]
-
- /* Disable Watchdog */
- ldr r0, =0x7e000000 @0x7e004000
- orr r0, r0, #0x4000
- mov r1, #0
- str r1, [r0]
-
- /* External interrupt pending clear */
- ldr r0, =(ELFIN_GPIO_BASE+EINTPEND_OFFSET) /*EINTPEND*/
- ldr r1, [r0]
- str r1, [r0]
-
- ldr r0, =ELFIN_VIC0_BASE_ADDR @0x71200000
- ldr r1, =ELFIN_VIC1_BASE_ADDR @0x71300000
-
- /* Disable all interrupts (VIC0 and VIC1) */
- mvn r3, #0x0
- str r3, [r0, #oINTMSK]
- str r3, [r1, #oINTMSK]
-
- /* Set all interrupts as IRQ */
- mov r3, #0x0
- str r3, [r0, #oINTMOD]
- str r3, [r1, #oINTMOD]
-
- /* Pending Interrupt Clear */
- mov r3, #0x0
- str r3, [r0, #oVECTADDR]
- str r3, [r1, #oVECTADDR]
-
- /* init system clock */
- bl system_clock_init
-
-#ifndef CONFIG_NAND_SPL
- /* for UART */
- bl uart_asm_init
-#endif
-
-#ifdef CONFIG_BOOT_NAND
- /* simple init for NAND */
- bl nand_asm_init
-#endif
-
- /* Memory subsystem address 0x7e00f120 */
- ldr r0, =ELFIN_MEM_SYS_CFG
-
- /* Xm0CSn2 = NFCON CS0, Xm0CSn3 = NFCON CS1 */
- mov r1, #S3C64XX_MEM_SYS_CFG_NAND
- str r1, [r0]
-
- bl mem_ctrl_asm_init
-
-/* Wakeup support. Don't know if it's going to be used, untested. */
- ldr r0, =(ELFIN_CLOCK_POWER_BASE + RST_STAT_OFFSET)
- ldr r1, [r0]
- bic r1, r1, #0xfffffff7
- cmp r1, #0x8
- beq wakeup_reset
-
-1:
- mov lr, r12
- mov pc, lr
-
-wakeup_reset:
-
- /* Clear wakeup status register */
- ldr r0, =(ELFIN_CLOCK_POWER_BASE + WAKEUP_STAT_OFFSET)
- ldr r1, [r0]
- str r1, [r0]
-
- /* LED test */
- ldr r0, =ELFIN_GPIO_BASE
- ldr r1, =0x3000
- str r1, [r0, #GPNDAT_OFFSET]
-
- /* Load return address and jump to kernel */
- ldr r0, =(ELFIN_CLOCK_POWER_BASE + INF_REG0_OFFSET)
- /* r1 = physical address of s3c6400_cpu_resume function */
- ldr r1, [r0]
- /* Jump to kernel (sleep-s3c6400.S) */
- mov pc, r1
- nop
- nop
-/*
- * system_clock_init: Initialize core clock and bus clock.
- * void system_clock_init(void)
- */
-system_clock_init:
- ldr r0, =ELFIN_CLOCK_POWER_BASE /* 0x7e00f000 */
-
-#ifdef CONFIG_SYNC_MODE
- ldr r1, [r0, #OTHERS_OFFSET]
- mov r2, #0x40
- orr r1, r1, r2
- str r1, [r0, #OTHERS_OFFSET]
-
- nop
- nop
- nop
- nop
- nop
-
- ldr r2, =0x80
- orr r1, r1, r2
- str r1, [r0, #OTHERS_OFFSET]
-
-check_syncack:
- ldr r1, [r0, #OTHERS_OFFSET]
- ldr r2, =0xf00
- and r1, r1, r2
- cmp r1, #0xf00
- bne check_syncack
-#else /* ASYNC Mode */
- nop
- nop
- nop
- nop
- nop
-
- /*
- * This was unconditional in original Samsung sources, but it doesn't
- * seem to make much sense on S3C6400.
- */
-#ifndef CONFIG_S3C6400
- ldr r1, [r0, #OTHERS_OFFSET]
- bic r1, r1, #0xC0
- orr r1, r1, #0x40
- str r1, [r0, #OTHERS_OFFSET]
-
-wait_for_async:
- ldr r1, [r0, #OTHERS_OFFSET]
- and r1, r1, #0xf00
- cmp r1, #0x0
- bne wait_for_async
-#endif
-
- ldr r1, [r0, #OTHERS_OFFSET]
- bic r1, r1, #0x40
- str r1, [r0, #OTHERS_OFFSET]
-#endif
-
- mov r1, #0xff00
- orr r1, r1, #0xff
- str r1, [r0, #APLL_LOCK_OFFSET]
- str r1, [r0, #MPLL_LOCK_OFFSET]
-
- /* Set Clock Divider */
- ldr r1, [r0, #CLK_DIV0_OFFSET]
- bic r1, r1, #0x30000
- bic r1, r1, #0xff00
- bic r1, r1, #0xff
- ldr r2, =CLK_DIV_VAL
- orr r1, r1, r2
- str r1, [r0, #CLK_DIV0_OFFSET]
-
- ldr r1, =APLL_VAL
- str r1, [r0, #APLL_CON_OFFSET]
- ldr r1, =MPLL_VAL
- str r1, [r0, #MPLL_CON_OFFSET]
-
- /* FOUT of EPLL is 96MHz */
- ldr r1, =0x200203
- str r1, [r0, #EPLL_CON0_OFFSET]
- ldr r1, =0x0
- str r1, [r0, #EPLL_CON1_OFFSET]
-
- /* APLL, MPLL, EPLL select to Fout */
- ldr r1, [r0, #CLK_SRC_OFFSET]
- orr r1, r1, #0x7
- str r1, [r0, #CLK_SRC_OFFSET]
-
- /* wait at least 200us to stablize all clock */
- mov r1, #0x10000
-1: subs r1, r1, #1
- bne 1b
-
- /* Synchronization for VIC port */
-#if defined(CONFIG_SYNC_MODE)
- ldr r1, [r0, #OTHERS_OFFSET]
- orr r1, r1, #0x20
- str r1, [r0, #OTHERS_OFFSET]
-#elif !defined(CONFIG_S3C6400)
- /* According to 661558um_S3C6400X_rev10.pdf 0x20 is reserved */
- ldr r1, [r0, #OTHERS_OFFSET]
- bic r1, r1, #0x20
- str r1, [r0, #OTHERS_OFFSET]
-#endif
- mov pc, lr
-
-
-#ifndef CONFIG_NAND_SPL
-/*
- * uart_asm_init: Initialize UART's pins
- */
-uart_asm_init:
- /* set GPIO to enable UART */
- ldr r0, =ELFIN_GPIO_BASE
- ldr r1, =0x220022
- str r1, [r0, #GPACON_OFFSET]
- mov pc, lr
-#endif
-
-#ifdef CONFIG_BOOT_NAND
-/*
- * NAND Interface init for SMDK6400
- */
-nand_asm_init:
- ldr r0, =ELFIN_NAND_BASE
- ldr r1, [r0, #NFCONF_OFFSET]
- orr r1, r1, #0x70
- orr r1, r1, #0x7700
- str r1, [r0, #NFCONF_OFFSET]
-
- ldr r1, [r0, #NFCONT_OFFSET]
- orr r1, r1, #0x07
- str r1, [r0, #NFCONT_OFFSET]
-
- mov pc, lr
-#endif
-
-#ifdef CONFIG_ENABLE_MMU
-/*
- * MMU Table for SMDK6400
- */
-
- /* form a first-level section entry */
-.macro FL_SECTION_ENTRY base,ap,d,c,b
- .word (\base << 20) | (\ap << 10) | \
- (\d << 5) | (1<<4) | (\c << 3) | (\b << 2) | (1<<1)
-.endm
-
-.section .mmudata, "a"
- .align 14
- /* the following alignment creates the mmu table at address 0x4000. */
- .globl mmu_table
-mmu_table:
- .set __base, 0
- /* 1:1 mapping for debugging */
- .rept 0xA00
- FL_SECTION_ENTRY __base, 3, 0, 0, 0
- .set __base, __base + 1
- .endr
-
- /* access is not allowed. */
- .rept 0xC00 - 0xA00
- .word 0x00000000
- .endr
-
- /* 128MB for SDRAM 0xC0000000 -> 0x50000000 */
- .set __base, 0x500
- .rept 0xC80 - 0xC00
- FL_SECTION_ENTRY __base, 3, 0, 1, 1
- .set __base, __base + 1
- .endr
-
- /* access is not allowed. */
- .rept 0x1000 - 0xc80
- .word 0x00000000
- .endr
-#endif
diff --git a/board/samsung/smdk6400/smdk6400.c b/board/samsung/smdk6400/smdk6400.c
deleted file mode 100644
index c40d1f9..0000000
--- a/board/samsung/smdk6400/smdk6400.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2008
- * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <asm/arch/s3c6400.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-#define CS8900_Tacs 0x0 /* 0clk address set-up */
-#define CS8900_Tcos 0x4 /* 4clk chip selection set-up */
-#define CS8900_Tacc 0xE /* 14clk access cycle */
-#define CS8900_Tcoh 0x1 /* 1clk chip selection hold */
-#define CS8900_Tah 0x4 /* 4clk address holding time */
-#define CS8900_Tacp 0x6 /* 6clk page mode access cycle */
-#define CS8900_PMC 0x0 /* normal(1data)page mode configuration */
-
-static inline void delay(unsigned long loops)
-{
- __asm__ volatile ("1:\n" "subs %0, %1, #1\n"
- "bne 1b"
- : "=r" (loops) : "0" (loops));
-}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-static void cs8900_pre_init(void)
-{
- SROM_BW_REG &= ~(0xf << 4);
- SROM_BW_REG |= (1 << 7) | (1 << 6) | (1 << 4);
- SROM_BC1_REG = ((CS8900_Tacs << 28) + (CS8900_Tcos << 24) +
- (CS8900_Tacc << 16) + (CS8900_Tcoh << 12) +
- (CS8900_Tah << 8) + (CS8900_Tacp << 4) + CS8900_PMC);
-}
-
-int board_init(void)
-{
- cs8900_pre_init();
-
- /* NOR-flash in SROM0 */
-
- /* Enable WAIT */
- SROM_BW_REG |= 4 | 8 | 1;
-
- gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
- return 0;
-}
-
-void dram_init_banksize(void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-}
-
-int dram_init(void)
-{
- gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
- PHYS_SDRAM_1_SIZE);
-
- return 0;
-}
-
-#ifdef CONFIG_DISPLAY_BOARDINFO
-int checkboard(void)
-{
- printf("Board: SMDK6400\n");
- return 0;
-}
-#endif
-
-#ifdef CONFIG_ENABLE_MMU
-ulong virt_to_phy_smdk6400(ulong addr)
-{
- if ((0xc0000000 <= addr) && (addr < 0xc8000000))
- return addr - 0xc0000000 + 0x50000000;
- else
- printf("do not support this address : %08lx\n", addr);
-
- return addr;
-}
-#endif
-
-ulong board_flash_get_legacy (ulong base, int banknum, flash_info_t *info)
-{
- if (banknum == 0) { /* non-CFI boot flash */
- info->portwidth = FLASH_CFI_16BIT;
- info->chipwidth = FLASH_CFI_BY16;
- info->interface = FLASH_CFI_X16;
- return 1;
- } else
- return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_CS8900
- rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/samsung/smdk6400/smdk6400_nand_spl.c b/board/samsung/smdk6400/smdk6400_nand_spl.c
deleted file mode 100644
index 26a6146..0000000
--- a/board/samsung/smdk6400/smdk6400_nand_spl.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2008
- * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-void board_init_f(unsigned long bootflag)
-{
- relocate_code(CONFIG_SYS_TEXT_BASE);
-}
diff --git a/board/samsung/smdk6400/u-boot-nand.lds b/board/samsung/smdk6400/u-boot-nand.lds
deleted file mode 100644
index 7c74267..0000000
--- a/board/samsung/smdk6400/u-boot-nand.lds
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * (C) Copyright 2008
- * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- arch/arm/cpu/arm1176/start.o (.text)
- *(.text)
- }
-
- . = ALIGN(4);
- .rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
-
- . = ALIGN(4);
- .data : { *(.data) }
-
- . = ALIGN(4);
- .got : { *(.got) }
-
-
- . = align(4);
- .u_boot_list : {
- KEEP(*(SORT(.u_boot_list*)));
- }
-
- . = ALIGN(4);
-
- __image_copy_end = .;
-
- . = align(4);
- .mmudata : { *(.mmudata) }
-
- . = ALIGN(4);
-
- .rel.dyn : {
- __rel_dyn_start = .;
- *(.rel*)
- __rel_dyn_end = .;
- }
-
- .dynsym : {
- __dynsym_start = .;
- *(.dynsym)
- }
-
- _end = .;
-
- .bss __rel_dyn_start (OVERLAY) : {
- __bss_start = .;
- *(.bss)
- . = ALIGN(4);
- __bss_end = .;
- }
-
- /DISCARD/ : { *(.dynstr*) }
- /DISCARD/ : { *(.dynamic*) }
- /DISCARD/ : { *(.plt*) }
- /DISCARD/ : { *(.interp*) }
- /DISCARD/ : { *(.gnu*) }
-}