diff options
Diffstat (limited to 'board')
-rw-r--r-- | board/freescale/p2020ds/Kconfig | 12 | ||||
-rw-r--r-- | board/freescale/p2020ds/MAINTAINERS | 10 | ||||
-rw-r--r-- | board/freescale/p2020ds/Makefile | 12 | ||||
-rw-r--r-- | board/freescale/p2020ds/ddr.c | 129 | ||||
-rw-r--r-- | board/freescale/p2020ds/law.c | 20 | ||||
-rw-r--r-- | board/freescale/p2020ds/p2020ds.c | 263 | ||||
-rw-r--r-- | board/freescale/p2020ds/tlb.c | 90 |
7 files changed, 0 insertions, 536 deletions
diff --git a/board/freescale/p2020ds/Kconfig b/board/freescale/p2020ds/Kconfig deleted file mode 100644 index e527ec9..0000000 --- a/board/freescale/p2020ds/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_P2020DS - -config SYS_BOARD - default "p2020ds" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "P2020DS" - -endif diff --git a/board/freescale/p2020ds/MAINTAINERS b/board/freescale/p2020ds/MAINTAINERS deleted file mode 100644 index cb61fc5..0000000 --- a/board/freescale/p2020ds/MAINTAINERS +++ /dev/null @@ -1,10 +0,0 @@ -P2020DS BOARD -#M: - -S: Maintained -F: board/freescale/p2020ds/ -F: include/configs/P2020DS.h -F: configs/P2020DS_defconfig -F: configs/P2020DS_36BIT_defconfig -F: configs/P2020DS_DDR2_defconfig -F: configs/P2020DS_SDCARD_defconfig -F: configs/P2020DS_SPIFLASH_defconfig diff --git a/board/freescale/p2020ds/Makefile b/board/freescale/p2020ds/Makefile deleted file mode 100644 index ee00806..0000000 --- a/board/freescale/p2020ds/Makefile +++ /dev/null @@ -1,12 +0,0 @@ -# -# Copyright 2007-2009 Freescale Semiconductor, Inc. -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += p2020ds.o -obj-y += ddr.o -obj-y += law.o -obj-y += tlb.o diff --git a/board/freescale/p2020ds/ddr.c b/board/freescale/p2020ds/ddr.c deleted file mode 100644 index debe70b..0000000 --- a/board/freescale/p2020ds/ddr.c +++ /dev/null @@ -1,129 +0,0 @@ -/* - * Copyright 2008-2009 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * Version 2 as published by the Free Software Foundation. - */ - -#include <common.h> - -#include <fsl_ddr_sdram.h> -#include <fsl_ddr_dimm_params.h> - -struct board_specific_parameters { - u32 n_ranks; - u32 datarate_mhz_high; - u32 clk_adjust; - u32 cpo; - u32 write_data_delay; - u32 force_2t; -}; - - -/* - * This table contains all valid speeds we want to override with board - * specific parameters. datarate_mhz_high values need to be in ascending order - * for each n_ranks group. - * - * ranges for parameters: - * wr_data_delay = 0-6 - * clk adjust = 0-8 - * cpo 2-0x1E (30) - */ -static const struct board_specific_parameters dimm0[] = { - /* - * memory controller 0 - * num| hi| clk| cpo|wrdata|2T - * ranks| mhz|adjst| | delay| - */ -#ifdef CONFIG_SYS_FSL_DDR2 - {2, 549, 4, 0x1f, 2, 0}, - {2, 680, 4, 0x1f, 3, 0}, - {2, 850, 4, 0x1f, 4, 0}, - {1, 549, 4, 0x1f, 2, 0}, - {1, 680, 4, 0x1f, 3, 0}, - {1, 850, 4, 0x1f, 4, 0}, -#else - {2, 850, 6, 0x1f, 4, 0}, - {1, 850, 4, 0x1f, 4, 0}, -#endif - {} -}; - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; - ulong ddr_freq; - int i; - - if (ctrl_num) { - printf("Wrong parameter for controller number %d", ctrl_num); - return; - } - if (!pdimm->n_ranks) - return; - - /* - * set odt_rd_cfg and odt_wr_cfg. If the there is only one dimm in - * that controller, set odt_wr_cfg to 4 for CS0, and 0 to CS1. If - * there are two dimms in the controller, set odt_rd_cfg to 3 and - * odt_wr_cfg to 3 for the even CS, 0 for the odd CS. - */ - for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) { - popts->cs_local_opts[i].odt_rd_cfg = 0; - popts->cs_local_opts[i].odt_wr_cfg = 1; - } - - pbsp = dimm0; - - /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr - * freqency and n_banks specified in board_specific_parameters table. - */ - ddr_freq = get_ddr_freq(0) / 1000000; - while (pbsp->datarate_mhz_high) { - if (pbsp->n_ranks == pdimm->n_ranks) { - if (ddr_freq <= pbsp->datarate_mhz_high) { - popts->clk_adjust = pbsp->clk_adjust; - popts->cpo_override = pbsp->cpo; - popts->write_data_delay = - pbsp->write_data_delay; - popts->twot_en = pbsp->force_2t; - goto found; - } - pbsp_highest = pbsp; - } - pbsp++; - } - - if (pbsp_highest) { - printf("Error: board specific timing not found " - "for data rate %lu MT/s!\n" - "Trying to use the highest speed (%u) parameters\n", - ddr_freq, pbsp_highest->datarate_mhz_high); - popts->clk_adjust = pbsp_highest->clk_adjust; - popts->cpo_override = pbsp_highest->cpo; - popts->write_data_delay = pbsp_highest->write_data_delay; - popts->twot_en = pbsp_highest->force_2t; - } else { - panic("DIMM is not supported by this board"); - } - -found: - /* - * Factors to consider for half-strength driver enable: - * - number of DIMMs installed - */ - popts->half_strength_driver_enable = 0; - popts->wrlvl_en = 1; - /* Write leveling override */ - popts->wrlvl_override = 1; - popts->wrlvl_sample = 0xa; - popts->wrlvl_start = 0x8; - /* Rtt and Rtt_WR override */ - popts->rtt_override = 1; - popts->rtt_override_value = DDR3_RTT_120_OHM; - popts->rtt_wr_override_value = 0; /* Rtt_WR= dynamic ODT off */ -} diff --git a/board/freescale/p2020ds/law.c b/board/freescale/p2020ds/law.c deleted file mode 100644 index 9cd4da9..0000000 --- a/board/freescale/p2020ds/law.c +++ /dev/null @@ -1,20 +0,0 @@ -/* - * Copyright 2008-2010 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/fsl_law.h> -#include <asm/mmu.h> - -struct law_entry law_table[] = { - SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_LBC), - SET_LAW(PIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_LBC), - SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_LBC), -}; - -int num_law_entries = ARRAY_SIZE(law_table); diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c deleted file mode 100644 index 5d18e8d..0000000 --- a/board/freescale/p2020ds/p2020ds.c +++ /dev/null @@ -1,263 +0,0 @@ -/* - * Copyright 2007-2012 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <pci.h> -#include <asm/processor.h> -#include <asm/mmu.h> -#include <asm/cache.h> -#include <asm/immap_85xx.h> -#include <asm/fsl_pci.h> -#include <fsl_ddr_sdram.h> -#include <asm/io.h> -#include <asm/fsl_serdes.h> -#include <miiphy.h> -#include <libfdt.h> -#include <fdt_support.h> -#include <fsl_mdio.h> -#include <tsec.h> -#include <asm/fsl_law.h> -#include <netdev.h> - -#include "../common/ngpixis.h" -#include "../common/sgmii_riser.h" - -DECLARE_GLOBAL_DATA_PTR; - -int board_early_init_f(void) -{ -#ifdef CONFIG_MMC - ccsr_gur_t *gur = (ccsr_gur_t *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - setbits_be32(&gur->pmuxcr, - (MPC85xx_PMUXCR_SDHC_CD | - MPC85xx_PMUXCR_SDHC_WP)); -#endif - - return 0; -} - -int checkboard(void) -{ - u8 sw; - - printf("Board: P2020DS Sys ID: 0x%02x, " - "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", - in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver)); - - sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH)); - sw = (sw & PIXIS_LBMAP_MASK) >> PIXIS_LBMAP_SHIFT; - - if (sw < 0x8) - /* The lower two bits are the actual vbank number */ - printf("vBank: %d\n", sw & 3); - else - puts("Promjet\n"); - - return 0; -} - -#if !defined(CONFIG_DDR_SPD) -/* - * Fixed sdram init -- doesn't use serial presence detect. - */ - -phys_size_t fixed_sdram(void) -{ - struct ccsr_ddr __iomem *ddr = - (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR; - uint d_init; - - ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG; - ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3; - ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0; - ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1; - ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2; - ddr->sdram_md_cntl = CONFIG_SYS_DDR_MODE_CTRL; - ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL; - ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT; - ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL; - ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2; - ddr->ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL; - ddr->ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL; - ddr->ddr_cdr1 = CONFIG_SYS_DDR_CDR1; - ddr->timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4; - ddr->timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5; - - if (!strcmp("performance", getenv("perf_mode"))) { - /* Performance Mode Values */ - - ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG_PERF; - ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS_PERF; - ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS_PERF; - ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_PERF; - ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_PERF; - - asm("sync;isync"); - - udelay(500); - - ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL_PERF; - } else { - /* Stable Mode Values */ - - ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG; - ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS; - ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS; - ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1; - ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2; - - /* ECC will be assumed in stable mode */ - ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN; - ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS; - ddr->err_sbe = CONFIG_SYS_DDR_SBE; - - asm("sync;isync"); - - udelay(500); - - ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL; - } - -#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) - d_init = 1; - debug("DDR - 1st controller: memory initializing\n"); - /* - * Poll until memory is initialized. - * 512 Meg at 400 might hit this 200 times or so. - */ - while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) - udelay(1000); - debug("DDR: memory initialized\n\n"); - asm("sync; isync"); - udelay(500); -#endif - - if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, - CONFIG_SYS_SDRAM_SIZE * 1024 * 1024, - LAW_TRGT_IF_DDR) < 0) { - printf("ERROR setting Local Access Windows for DDR\n"); - return 0; - }; - - return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; -} - -#endif - -#ifdef CONFIG_PCI -void pci_init_board(void) -{ - fsl_pcie_init_board(0); -} -#endif - -int board_early_init_r(void) -{ - const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - int flash_esel = find_tlb_idx((void *)flashbase, 1); - - /* - * Remap Boot flash + PROMJET region to caching-inhibited - * so that flash can be erased properly. - */ - - /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); - - if (flash_esel == -1) { - /* very unlikely unless something is messed up */ - puts("Error: Could not find TLB for FLASH BASE\n"); - flash_esel = 2; /* give our best effort to continue */ - } else { - /* invalidate existing TLB entry for flash + promjet */ - disable_tlb(flash_esel); - } - - set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, flash_esel, BOOKE_PAGESZ_256M, 1); - - return 0; -} - -#ifdef CONFIG_TSEC_ENET -int board_eth_init(bd_t *bis) -{ - struct fsl_pq_mdio_info mdio_info; - struct tsec_info_struct tsec_info[4]; - int num = 0; - -#ifdef CONFIG_TSEC1 - SET_STD_TSEC_INFO(tsec_info[num], 1); - num++; -#endif -#ifdef CONFIG_TSEC2 - SET_STD_TSEC_INFO(tsec_info[num], 2); - if (is_serdes_configured(SGMII_TSEC2)) { - puts("eTSEC2 is in sgmii mode.\n"); - tsec_info[num].flags |= TSEC_SGMII; - } - num++; -#endif -#ifdef CONFIG_TSEC3 - SET_STD_TSEC_INFO(tsec_info[num], 3); - if (is_serdes_configured(SGMII_TSEC3)) { - puts("eTSEC3 is in sgmii mode.\n"); - tsec_info[num].flags |= TSEC_SGMII; -} - num++; -#endif - - if (!num) { - printf("No TSECs initialized\n"); - - return 0; - } - -#ifdef CONFIG_FSL_SGMII_RISER - fsl_sgmii_riser_init(tsec_info, num); -#endif - - mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR; - mdio_info.name = DEFAULT_MII_NAME; - - fsl_pq_mdio_init(bis, &mdio_info); - - tsec_eth_init(bis, tsec_info, num); - - return pci_eth_init(bis); -} -#endif - -#if defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, bd_t *bd) -{ - phys_addr_t base; - phys_size_t size; - - ft_cpu_setup(blob, bd); - - base = getenv_bootm_low(); - size = getenv_bootm_size(); - - fdt_fixup_memory(blob, (u64)base, (u64)size); - -#ifdef CONFIG_HAS_FSL_DR_USB - fdt_fixup_dr_usb(blob, bd); -#endif - - FT_FSL_PCI_SETUP; - -#ifdef CONFIG_FSL_SGMII_RISER - fsl_sgmii_riser_fdt_fixup(blob); -#endif - - return 0; -} -#endif diff --git a/board/freescale/p2020ds/tlb.c b/board/freescale/p2020ds/tlb.c deleted file mode 100644 index 02da6e8..0000000 --- a/board/freescale/p2020ds/tlb.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Copyright 2008-2011 Freescale Semiconductor, Inc. - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/mmu.h> - -struct fsl_e_tlb_entry tlb_table[] = { - /* TLB 0 - for temp stack in cache */ - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024, - CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024, - MAS3_SX|MAS3_SW|MAS3_SR, 0, - 0, 0, BOOKE_PAGESZ_4K, 0), - - /* TLB 1 */ - /* *I*** - Covers boot page */ - SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 0, BOOKE_PAGESZ_4K, 1), - - /* *I*G* - CCSRBAR */ - SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 1, BOOKE_PAGESZ_1M, 1), - - /* W**G* - Flash/promjet, localbus */ - /* This will be changed to *I*G* after relocation to RAM. */ - SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS, - MAS3_SX|MAS3_SR, MAS2_W|MAS2_G, - 0, 2, BOOKE_PAGESZ_256M, 1), - - /* *I*G* - PCI */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT, CONFIG_SYS_PCIE3_MEM_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 3, BOOKE_PAGESZ_1G, 1), - - /* *I*G* - PCI */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x40000000, - CONFIG_SYS_PCIE3_MEM_PHYS + 0x40000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 4, BOOKE_PAGESZ_256M, 1), - - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_MEM_VIRT + 0x50000000, - CONFIG_SYS_PCIE3_MEM_PHYS + 0x50000000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 5, BOOKE_PAGESZ_256M, 1), - - /* *I*G* - PCI I/O */ - SET_TLB_ENTRY(1, CONFIG_SYS_PCIE3_IO_VIRT, CONFIG_SYS_PCIE3_IO_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 6, BOOKE_PAGESZ_256K, 1), - - /* *I*G - NAND */ - SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 7, BOOKE_PAGESZ_1M, 1), - - SET_TLB_ENTRY(1, PIXIS_BASE, PIXIS_BASE_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 8, BOOKE_PAGESZ_4K, 1), - -#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR) - /* *I*G - L2SRAM */ - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 9, BOOKE_PAGESZ_256K, 1), - SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000, - CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000, - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, - 0, 10, BOOKE_PAGESZ_256K, 1), -#endif -}; - -int num_tlb_entries = ARRAY_SIZE(tlb_table); |