summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/Barix/ipam390/README.ipam3902
-rw-r--r--board/altera/common/sevenseg.c4
-rw-r--r--board/boundary/nitrogen6x/6x_upgrade.txt52
-rw-r--r--board/chromebook-x86/dts/alex.dts10
-rw-r--r--board/chromebook-x86/dts/link.dts10
-rw-r--r--board/cobra5272/bdm/cobra5272_uboot.gdb4
-rw-r--r--board/cogent/flash.c2
-rw-r--r--board/cray/L1/bootscript.hush6
-rw-r--r--board/esd/common/lcd.h2
-rw-r--r--board/esd/cpci750/ide.c2
-rw-r--r--board/esd/cpci750/pci.c2
-rw-r--r--board/etin/debris/flash.c12
-rw-r--r--board/evb64260/flash.c14
-rw-r--r--board/evb64260/mpsc.c4
-rw-r--r--board/fads/fads.c4
-rw-r--r--board/freescale/b4860qds/tlb.c2
-rw-r--r--board/freescale/bsc9132qds/README10
-rw-r--r--board/freescale/mpc8313erdb/mpc8313erdb.c4
-rw-r--r--board/freescale/mpc8360emds/mpc8360emds.c4
-rw-r--r--board/funkwerk/vovpn-gw/vovpn-gw.c6
-rw-r--r--board/gen860t/flash.c2
-rw-r--r--board/incaip/incaip.c4
-rw-r--r--board/matrix_vision/mvbc_p/Makefile2
-rw-r--r--board/matrix_vision/mvsmr/Makefile2
-rw-r--r--board/openrisc/openrisc-generic/or1ksim.cfg122
-rw-r--r--board/ppmc8260/strataflash.c2
-rw-r--r--board/pxa255_idp/pxa_reg_calcs.py6
-rw-r--r--board/rbc823/rbc823.c2
-rw-r--r--board/samsung/dts/exynos5250-snow.dts6
-rw-r--r--board/svm_sc8xx/svm_sc8xx.c2
30 files changed, 153 insertions, 153 deletions
diff --git a/board/Barix/ipam390/README.ipam390 b/board/Barix/ipam390/README.ipam390
index 2d155a3..5c45fca 100644
--- a/board/Barix/ipam390/README.ipam390
+++ b/board/Barix/ipam390/README.ipam390
@@ -50,7 +50,7 @@ TFTP from server 192.168.1.1; our IP address is 192.168.20.71
Filename '/tftpboot/ipam390/u-boot.ais'.
Load address: 0xc0000000
Loading: ##################################
- 1.5 MiB/s
+ 1.5 MiB/s
done
Bytes transferred = 493716 (78894 hex)
diff --git a/board/altera/common/sevenseg.c b/board/altera/common/sevenseg.c
index 7ae7ca2..1f22c85 100644
--- a/board/altera/common/sevenseg.c
+++ b/board/altera/common/sevenseg.c
@@ -87,10 +87,10 @@ static inline void __sevenseg_set (unsigned int value)
#if (SEVENSEG_ACTIVE == 0)
sevenseg_portval = (sevenseg_portval & SEVENDEG_MASK_DP)
- | ((~value) & (~SEVENDEG_MASK_DP));
+ | ((~value) & (~SEVENDEG_MASK_DP));
#else
sevenseg_portval = (sevenseg_portval & SEVENDEG_MASK_DP)
- | (value);
+ | (value);
#endif
piop->data = sevenseg_portval;
diff --git a/board/boundary/nitrogen6x/6x_upgrade.txt b/board/boundary/nitrogen6x/6x_upgrade.txt
index 0d8e8e5..1f9a889 100644
--- a/board/boundary/nitrogen6x/6x_upgrade.txt
+++ b/board/boundary/nitrogen6x/6x_upgrade.txt
@@ -6,39 +6,39 @@ if ${fs}load ${dtype} ${disk}:1 12000000 u-boot.imx || ${fs}load ${dtype} ${disk
if sf probe || sf probe || \
sf probe 1 27000000 || sf probe 1 27000000 ; then
echo "probed SPI ROM" ;
- if sf read 0x12400000 $offset $filesize ; then
- if cmp.b 0x12000000 0x12400000 $filesize ; then
- echo "------- U-Boot versions match" ;
- else
- echo "Need U-Boot upgrade" ;
- echo "Program in 5 seconds" ;
- for n in 5 4 3 2 1 ; do
- echo $n ;
- sleep 1 ;
- done
+ if sf read 0x12400000 $offset $filesize ; then
+ if cmp.b 0x12000000 0x12400000 $filesize ; then
+ echo "------- U-Boot versions match" ;
+ else
+ echo "Need U-Boot upgrade" ;
+ echo "Program in 5 seconds" ;
+ for n in 5 4 3 2 1 ; do
+ echo $n ;
+ sleep 1 ;
+ done
echo "erasing" ;
- sf erase 0 0x50000 ;
+ sf erase 0 0x50000 ;
# two steps to prevent bricking
echo "programming" ;
- sf write 0x12000000 $offset $filesize ;
+ sf write 0x12000000 $offset $filesize ;
echo "verifying" ;
- if sf read 0x12400000 $offset $filesize ; then
- if cmp.b 0x12000000 0x12400000 $filesize ; then
- while echo "---- U-Boot upgraded. reset" ; do
+ if sf read 0x12400000 $offset $filesize ; then
+ if cmp.b 0x12000000 0x12400000 $filesize ; then
+ while echo "---- U-Boot upgraded. reset" ; do
sleep 120
done
- else
- echo "Read verification error" ;
- fi
- else
- echo "Error re-reading EEPROM" ;
- fi
- fi
- else
- echo "Error reading boot loader from EEPROM" ;
- fi
+ else
+ echo "Read verification error" ;
+ fi
+ else
+ echo "Error re-reading EEPROM" ;
+ fi
+ fi
+ else
+ echo "Error reading boot loader from EEPROM" ;
+ fi
else
- echo "Error initializing EEPROM" ;
+ echo "Error initializing EEPROM" ;
fi ;
else
echo "No U-Boot image found on SD card" ;
diff --git a/board/chromebook-x86/dts/alex.dts b/board/chromebook-x86/dts/alex.dts
index cb6a9e4..2f13544 100644
--- a/board/chromebook-x86/dts/alex.dts
+++ b/board/chromebook-x86/dts/alex.dts
@@ -3,8 +3,8 @@
/include/ "coreboot.dtsi"
/ {
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Google Alex";
compatible = "google,alex", "intel,atom-pineview";
@@ -12,13 +12,13 @@
silent_console = <0>;
};
- gpio: gpio {};
+ gpio: gpio {};
serial {
reg = <0x3f8 8>;
clock-frequency = <115200>;
};
- chosen { };
- memory { device_type = "memory"; reg = <0 0>; };
+ chosen { };
+ memory { device_type = "memory"; reg = <0 0>; };
};
diff --git a/board/chromebook-x86/dts/link.dts b/board/chromebook-x86/dts/link.dts
index c95ee8a..4a37dac 100644
--- a/board/chromebook-x86/dts/link.dts
+++ b/board/chromebook-x86/dts/link.dts
@@ -3,8 +3,8 @@
/include/ "coreboot.dtsi"
/ {
- #address-cells = <1>;
- #size-cells = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
model = "Google Link";
compatible = "google,link", "intel,celeron-ivybridge";
@@ -12,15 +12,15 @@
silent_console = <0>;
};
- gpio: gpio {};
+ gpio: gpio {};
serial {
reg = <0x3f8 8>;
clock-frequency = <115200>;
};
- chosen { };
- memory { device_type = "memory"; reg = <0 0>; };
+ chosen { };
+ memory { device_type = "memory"; reg = <0 0>; };
spi {
#address-cells = <1>;
diff --git a/board/cobra5272/bdm/cobra5272_uboot.gdb b/board/cobra5272/bdm/cobra5272_uboot.gdb
index abecb40..61e778e 100644
--- a/board/cobra5272/bdm/cobra5272_uboot.gdb
+++ b/board/cobra5272/bdm/cobra5272_uboot.gdb
@@ -1,11 +1,11 @@
#
# GDB Init script for the Coldfire 5272 processor.
#
-# The main purpose of this script is to configure the
+# The main purpose of this script is to configure the
# DRAM controller so code can be loaded.
#
# This file was changed to suite the senTec COBRA5272 board.
-#
+#
define addresses
diff --git a/board/cogent/flash.c b/board/cogent/flash.c
index 207380f..d4ae4d0 100644
--- a/board/cogent/flash.c
+++ b/board/cogent/flash.c
@@ -487,7 +487,7 @@ flash_erase(flash_info_t *info, int s_first, int s_last)
if (haderr > 0) {
printf (" failed\n");
- rcode = 1;
+ rcode = 1;
}
else
printf (" done\n");
diff --git a/board/cray/L1/bootscript.hush b/board/cray/L1/bootscript.hush
index c9e3c91..f2f78ad 100644
--- a/board/cray/L1/bootscript.hush
+++ b/board/cray/L1/bootscript.hush
@@ -47,7 +47,7 @@ else
echo no kernel to boot from $flash_krl, need tftp
fi
-# Have a rootfs in flash?
+# Have a rootfs in flash?
echo test for SQUASHfs at $flash_rfs
if imi $flash_rfs
@@ -69,7 +69,7 @@ fi
# TFTP down a kernel
if printenv bootfile
-then
+then
tftp $tftp_addr $bootfile
setenv kernel $tftp_addr
echo I will boot the TFTP kernel
@@ -90,7 +90,7 @@ if printenv rootpath
then
echo rootpath is $rootpath
if printenv initrd
- then
+ then
echo initrd is also specified, so use $initrd
tftp $tftp2_addr $initrd
setenv bootargs root=/dev/ram0 rw cwsroot=$serverip:$rootpath $bootargs
diff --git a/board/esd/common/lcd.h b/board/esd/common/lcd.h
index 96e4b99..5b14bf9 100644
--- a/board/esd/common/lcd.h
+++ b/board/esd/common/lcd.h
@@ -9,7 +9,7 @@
* Neutralize little endians.
*/
#define SWAP_LONG(data) ((unsigned long) \
- (((unsigned long)(data) >> 24) | \
+ (((unsigned long)(data) >> 24) | \
((unsigned long)(data) << 24) | \
(((unsigned long)(data) >> 8) & 0x0000ff00 ) | \
(((unsigned long)(data) << 8) & 0x00ff0000 )))
diff --git a/board/esd/cpci750/ide.c b/board/esd/cpci750/ide.c
index 5f30685..f555c08 100644
--- a/board/esd/cpci750/ide.c
+++ b/board/esd/cpci750/ide.c
@@ -43,7 +43,7 @@ int ide_preinit (void)
if (devbusfn != -1) {
cpci_hd_type = 1;
} else {
- devbusfn = pci_find_device (0x1095, 0x3114, 0);
+ devbusfn = pci_find_device (0x1095, 0x3114, 0);
if (devbusfn != -1) {
cpci_hd_type = 2;
}
diff --git a/board/esd/cpci750/pci.c b/board/esd/cpci750/pci.c
index c9b3ac2..59f170a 100644
--- a/board/esd/cpci750/pci.c
+++ b/board/esd/cpci750/pci.c
@@ -746,7 +746,7 @@ static int gt_read_config_dword (struct pci_controller *hose,
int bus = PCI_BUS (dev);
if ((bus == local_buses[0]) || (bus == local_buses[1])) {
- *value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr,
+ *value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr,
offset | (PCI_FUNC(dev) << 8),
PCI_DEV (dev));
} else {
diff --git a/board/etin/debris/flash.c b/board/etin/debris/flash.c
index 9d22aa2..2657958 100644
--- a/board/etin/debris/flash.c
+++ b/board/etin/debris/flash.c
@@ -323,7 +323,7 @@ int flash_erase (flash_info_t *flash, int s_first, int s_last)
if (prot)
printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
+ prot);
else
printf ("\n");
@@ -365,7 +365,7 @@ static const struct jedec_flash_info jedec_table[] = {
DevSize: SIZE_1MiB,
NumEraseRegions: 4,
regions: {ERASEINFO(0x10000,15),
- ERASEINFO(0x08000,1),
+ ERASEINFO(0x08000,1),
ERASEINFO(0x02000,2),
ERASEINFO(0x04000,1)
}
@@ -376,7 +376,7 @@ static const struct jedec_flash_info jedec_table[] = {
DevSize: SIZE_2MiB,
NumEraseRegions: 4,
regions: {ERASEINFO(0x10000,31),
- ERASEINFO(0x08000,1),
+ ERASEINFO(0x08000,1),
ERASEINFO(0x02000,2),
ERASEINFO(0x04000,1)
}
@@ -387,7 +387,7 @@ static const struct jedec_flash_info jedec_table[] = {
DevSize: SIZE_2MiB,
NumEraseRegions: 4,
regions: {ERASEINFO(0x04000,1),
- ERASEINFO(0x02000,2),
+ ERASEINFO(0x02000,2),
ERASEINFO(0x08000,1),
ERASEINFO(0x10000,31)
}
@@ -398,7 +398,7 @@ static const struct jedec_flash_info jedec_table[] = {
DevSize: SIZE_4MiB,
NumEraseRegions: 2,
regions: {ERASEINFO(0x10000,63),
- ERASEINFO(0x02000,8)
+ ERASEINFO(0x02000,8)
}
}, {
@@ -408,7 +408,7 @@ static const struct jedec_flash_info jedec_table[] = {
DevSize: SIZE_4MiB,
NumEraseRegions: 2,
regions: {ERASEINFO(0x02000,8),
- ERASEINFO(0x10000,63)
+ ERASEINFO(0x10000,63)
}
}
};
diff --git a/board/evb64260/flash.c b/board/evb64260/flash.c
index 88c43ff..f3b0074 100644
--- a/board/evb64260/flash.c
+++ b/board/evb64260/flash.c
@@ -60,7 +60,7 @@ flash_init (void)
#define CONFIG_SYS_BOOT_FLASH_WIDTH 1
#endif
size_b0 = flash_get_size(CONFIG_SYS_BOOT_FLASH_WIDTH, (vu_long *)base,
- &flash_info[0]);
+ &flash_info[0]);
#ifndef CONFIG_P3G4
printf("[");
@@ -97,17 +97,17 @@ flash_init (void)
#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
/* monitor protection ON by default */
flash_protect(FLAG_PROTECT_SET,
- CONFIG_SYS_MONITOR_BASE,
- CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
- flash_get_info(CONFIG_SYS_MONITOR_BASE));
+ CONFIG_SYS_MONITOR_BASE,
+ CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
+ flash_get_info(CONFIG_SYS_MONITOR_BASE));
#endif
#ifdef CONFIG_ENV_IS_IN_FLASH
/* ENV protection ON by default */
flash_protect(FLAG_PROTECT_SET,
- CONFIG_ENV_ADDR,
- CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
- flash_get_info(CONFIG_ENV_ADDR));
+ CONFIG_ENV_ADDR,
+ CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
+ flash_get_info(CONFIG_ENV_ADDR));
#endif
flash_size = size_b0 + size_b1;
diff --git a/board/evb64260/mpsc.c b/board/evb64260/mpsc.c
index 1a2ad20..c9da57c 100644
--- a/board/evb64260/mpsc.c
+++ b/board/evb64260/mpsc.c
@@ -785,7 +785,7 @@ galmpsc_shutdown(int mpsc)
GT_REG_WRITE(GALSDMA_0_COM_REG + CHANNEL * GALSDMA_REG_DIFF, 0);
GT_REG_WRITE(GALSDMA_0_COM_REG + CHANNEL * GALSDMA_REG_DIFF,
- SDMA_TX_ABORT | SDMA_RX_ABORT);
+ SDMA_TX_ABORT | SDMA_RX_ABORT);
/* shut down the MPSC */
GT_REG_WRITE(GALMPSC_MCONF_LOW, 0);
@@ -797,7 +797,7 @@ galmpsc_shutdown(int mpsc)
/* shut down the sdma engines. */
/* reset config to default */
GT_REG_WRITE(GALSDMA_0_CONF_REG + CHANNEL * GALSDMA_REG_DIFF,
- 0x000000fc);
+ 0x000000fc);
udelay(100);
diff --git a/board/fads/fads.c b/board/fads/fads.c
index 3fe318f..89dd9ef 100644
--- a/board/fads/fads.c
+++ b/board/fads/fads.c
@@ -434,7 +434,7 @@ static int _initsdram(uint base, uint noMbytes)
*/
memctl->memc_mcr = 0x80808111; /* run umpb cs4 1 count 1, addr 0x11 ??? (50MHz) */
- /* run umpb cs4 1 count 1, addr 0x11 precharge+MRS (100MHz) */
+ /* run umpb cs4 1 count 1, addr 0x11 precharge+MRS (100MHz) */
udelay(200);
/* Run 8 refresh cycles */
@@ -567,7 +567,7 @@ static int initsdram(uint base, uint *noMbytes)
if(!_initsdram(base, m))
{
- *noMbytes += m;
+ *noMbytes += m;
return 0;
}
else
diff --git a/board/freescale/b4860qds/tlb.c b/board/freescale/b4860qds/tlb.c
index f71aca4..00798a1 100644
--- a/board/freescale/b4860qds/tlb.c
+++ b/board/freescale/b4860qds/tlb.c
@@ -68,7 +68,7 @@ struct fsl_e_tlb_entry tlb_table[] = {
0, 3, BOOKE_PAGESZ_256M, 1),
SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x10000000,
- CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000,
+ CONFIG_SYS_PCIE1_MEM_PHYS + 0x10000000,
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
0, 4, BOOKE_PAGESZ_256M, 1),
diff --git a/board/freescale/bsc9132qds/README b/board/freescale/bsc9132qds/README
index 4a3dbfe..f8377c9 100644
--- a/board/freescale/bsc9132qds/README
+++ b/board/freescale/bsc9132qds/README
@@ -23,14 +23,14 @@ Overview
ECC), up to 1333 MHz data rate
- Dedicated security engine featuring trusted boot
- Two DMA controllers
- - OCNDMA with four bidirectional channels
- - SysDMA with sixteen bidirectional channels
+ - OCNDMA with four bidirectional channels
+ - SysDMA with sixteen bidirectional channels
- Interfaces
- - Four-lane SerDes PHY
+ - Four-lane SerDes PHY
- PCI Express controller complies with the PEX Specification-Rev 2.0
- - Two Common Public Radio Interface (CPRI) controller lanes
+ - Two Common Public Radio Interface (CPRI) controller lanes
- High-speed USB 2.0 host and device controller with ULPI interface
- - Enhanced secure digital (SD/MMC) host controller (eSDHC)
+ - Enhanced secure digital (SD/MMC) host controller (eSDHC)
- Antenna interface controller (AIC), supporting four industry
standard JESD207/four custom ADI RF interfaces
- ADI lanes support both full duplex FDD support & half duplex TDD
diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c
index 591a4c6..69e98a5 100644
--- a/board/freescale/mpc8313erdb/mpc8313erdb.c
+++ b/board/freescale/mpc8313erdb/mpc8313erdb.c
@@ -129,12 +129,12 @@ void board_init_f(ulong bootflag)
{
board_early_init_f();
NS16550_init((NS16550_t)(CONFIG_SYS_IMMR + 0x4500),
- CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
+ CONFIG_SYS_NS16550_CLK / 16 / CONFIG_BAUDRATE);
puts("NAND boot... ");
init_timebase();
initdram(0);
relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, (gd_t *)gd,
- CONFIG_SYS_NAND_U_BOOT_RELOC);
+ CONFIG_SYS_NAND_U_BOOT_RELOC);
}
void board_init_r(gd_t *gd, ulong dest_addr)
diff --git a/board/freescale/mpc8360emds/mpc8360emds.c b/board/freescale/mpc8360emds/mpc8360emds.c
index 39a86df..ac96163 100644
--- a/board/freescale/mpc8360emds/mpc8360emds.c
+++ b/board/freescale/mpc8360emds/mpc8360emds.c
@@ -427,7 +427,7 @@ void ft_board_setup(void *blob, bd_t *bd)
if (prop) {
path = fdt_path_offset(blob, prop);
prop = fdt_getprop(blob, path,
- "phy-connection-type", 0);
+ "phy-connection-type", 0);
if (prop && (strcmp(prop, "rgmii-id") == 0))
fdt_fixup_phy_connection(blob, path,
PHY_INTERFACE_MODE_RGMII_RXID);
@@ -439,7 +439,7 @@ void ft_board_setup(void *blob, bd_t *bd)
if (prop) {
path = fdt_path_offset(blob, prop);
prop = fdt_getprop(blob, path,
- "phy-connection-type", 0);
+ "phy-connection-type", 0);
if (prop && (strcmp(prop, "rgmii-id") == 0))
fdt_fixup_phy_connection(blob, path,
PHY_INTERFACE_MODE_RGMII_RXID);
diff --git a/board/funkwerk/vovpn-gw/vovpn-gw.c b/board/funkwerk/vovpn-gw/vovpn-gw.c
index d33563b..c2aad6e 100644
--- a/board/funkwerk/vovpn-gw/vovpn-gw.c
+++ b/board/funkwerk/vovpn-gw/vovpn-gw.c
@@ -270,9 +270,9 @@ int misc_init_r (void)
for (i = 0; i < 64; i++) {
c = *dummy;
printf( "UPMA[%02d]: 0x%08lx,0x%08lx: 0x%08lx\n",i,
- memctl->memc_mamr,
- memctl->memc_mar,
- memctl->memc_mdr );
+ memctl->memc_mamr,
+ memctl->memc_mar,
+ memctl->memc_mdr );
}
memctl->memc_mamr = 0x00044440;
#endif
diff --git a/board/gen860t/flash.c b/board/gen860t/flash.c
index 8433d5d..ca1ed3d 100644
--- a/board/gen860t/flash.c
+++ b/board/gen860t/flash.c
@@ -182,7 +182,7 @@ flash_get_offsets (ulong base, flash_info_t *info)
default:
printf ("Don't know sector offsets for FLASH"
- " type 0x%lx\n", info->flash_id);
+ " type 0x%lx\n", info->flash_id);
return;
}
}
diff --git a/board/incaip/incaip.c b/board/incaip/incaip.c
index 911fb63..217b8af 100644
--- a/board/incaip/incaip.c
+++ b/board/incaip/incaip.c
@@ -58,9 +58,9 @@ phys_size_t initdram(int board_type)
for (rows = 0xB; rows <= 0xD; rows++)
{
*INCA_IP_SDRAM_MC_CFGPB0 = (0x14 << 8) |
- (rows << 4) | cols;
+ (rows << 4) | cols;
size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
- max_sdram_size());
+ max_sdram_size());
if (size > max_size)
{
diff --git a/board/matrix_vision/mvbc_p/Makefile b/board/matrix_vision/mvbc_p/Makefile
index 84add28..61474aa 100644
--- a/board/matrix_vision/mvbc_p/Makefile
+++ b/board/matrix_vision/mvbc_p/Makefile
@@ -19,7 +19,7 @@ OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
+ $(call cmd_link_o_target, $(OBJS))
#########################################################################
diff --git a/board/matrix_vision/mvsmr/Makefile b/board/matrix_vision/mvsmr/Makefile
index 0e53e8d..ef768fe 100644
--- a/board/matrix_vision/mvsmr/Makefile
+++ b/board/matrix_vision/mvsmr/Makefile
@@ -19,7 +19,7 @@ OBJS := $(addprefix $(obj),$(COBJS))
SOBJS := $(addprefix $(obj),$(SOBJS))
$(LIB): $(obj).depend $(OBJS)
- $(call cmd_link_o_target, $(OBJS))
+ $(call cmd_link_o_target, $(OBJS))
@mkimage -T script -C none -n mvSMR_Script -d bootscript $(obj)bootscript.img
#########################################################################
diff --git a/board/openrisc/openrisc-generic/or1ksim.cfg b/board/openrisc/openrisc-generic/or1ksim.cfg
index 9926093..2bd8642 100644
--- a/board/openrisc/openrisc-generic/or1ksim.cfg
+++ b/board/openrisc/openrisc-generic/or1ksim.cfg
@@ -20,8 +20,8 @@ the simulator.
not found too, it reverts to the built-in default configuration.
NOTE: Users should not rely on the built-in configuration, since the
- default configuration may differ between version.
- Rather create a configuration file that sets all critical values.
+ default configuration may differ between version.
+ Rather create a configuration file that sets all critical values.
This file may contain (standard C) comments only - no // support.
@@ -306,7 +306,7 @@ end
debug = 0-9
0 : no debug messages
1-9: debug message level.
- higher numbers produce more messages
+ higher numbers produce more messages
profile = 0/1
'0': don't generate profiling file 'sim.profile'
@@ -375,11 +375,11 @@ end
Core Verification.
enabled = 0/1
- '0': disbable VAPI server
- '1': enable/start VAPI server
+ '0': disbable VAPI server
+ '1': enable/start VAPI server
server_port = <value>
- TCP/IP port to start VAPI server on
+ TCP/IP port to start VAPI server on
log_enabled = 0/1
'0': disable VAPI requests logging
@@ -565,56 +565,56 @@ end
This section configures the UARTs
enabled = <0|1>
- Enable/disable the peripheral. By default if it is enabled.
+ Enable/disable the peripheral. By default if it is enabled.
baseaddr = <hex_value>
- address of first UART register for this device
+ address of first UART register for this device
channel = <channeltype>:<args>
- The channel parameter indicates the source of received UART characters
- and the sink for transmitted UART characters.
+ The channel parameter indicates the source of received UART characters
+ and the sink for transmitted UART characters.
- The <channeltype> can be either "file", "xterm", "tcp", "fd", or "tty"
- (without quotes).
+ The <channeltype> can be either "file", "xterm", "tcp", "fd", or "tty"
+ (without quotes).
- A) To send/receive characters from a pair of files, use a file
- channel:
+ A) To send/receive characters from a pair of files, use a file
+ channel:
- channel=file:<rxfile>,<txfile>
+ channel=file:<rxfile>,<txfile>
B) To create an interactive terminal window, use an xterm channel:
- channel=xterm:[<xterm_arg>]*
+ channel=xterm:[<xterm_arg>]*
C) To create a bidirectional tcp socket which one could, for example,
- access via telnet, use a tcp channel:
+ access via telnet, use a tcp channel:
- channel=tcp:<port number>
+ channel=tcp:<port number>
D) To cause the UART to read/write from existing numeric file
- descriptors, use an fd channel:
+ descriptors, use an fd channel:
- channel=fd:<rx file descriptor num>,<tx file descriptor num>
+ channel=fd:<rx file descriptor num>,<tx file descriptor num>
- E) To connect the UART to a physical serial port, create a tty
- channel:
+ E) To connect the UART to a physical serial port, create a tty
+ channel:
channel=tty:device=/dev/ttyS0,baud=9600
irq = <value>
- irq number for this device
+ irq number for this device
16550 = 0/1
- '0': this device is a UART16450
- '1': this device is a UART16550
+ '0': this device is a UART16450
+ '1': this device is a UART16550
jitter = <value>
- in msecs... time to block, -1 to disable it
+ in msecs... time to block, -1 to disable it
vapi_id = <hex_value>
- VAPI id of this instance
+ VAPI id of this instance
*/
section uart
@@ -634,16 +634,16 @@ end
This section configures the DMAs
enabled = <0|1>
- Enable/disable the peripheral. By default if it is enabled.
+ Enable/disable the peripheral. By default if it is enabled.
baseaddr = <hex_value>
- address of first DMA register for this device
+ address of first DMA register for this device
irq = <value>
- irq number for this device
+ irq number for this device
vapi_id = <hex_value>
- VAPI id of this instance
+ VAPI id of this instance
*/
section dma
@@ -658,37 +658,37 @@ end
This section configures the ETHERNETs
enabled = <0|1>
- Enable/disable the peripheral. By default if it is enabled.
+ Enable/disable the peripheral. By default if it is enabled.
baseaddr = <hex_value>
- address of first ethernet register for this device
+ address of first ethernet register for this device
dma = <value>
- which controller is this ethernet "connected" to
+ which controller is this ethernet "connected" to
irq = <value>
- ethernet mac IRQ level
+ ethernet mac IRQ level
rtx_type = <value>
- use 0 - file interface, 1 - socket interface
+ use 0 - file interface, 1 - socket interface
rx_channel = <value>
- DMA channel used for RX
+ DMA channel used for RX
tx_channel = <value>
- DMA channel used for TX
+ DMA channel used for TX
rxfile = "<filename>"
- filename, where to read data from
+ filename, where to read data from
txfile = "<filename>"
- filename, where to write data to
+ filename, where to write data to
sockif = "<ifacename>"
- interface name of ethernet socket
+ interface name of ethernet socket
vapi_id = <hex_value>
- VAPI id of this instance
+ VAPI id of this instance
*/
section ethernet
@@ -711,16 +711,16 @@ end
This section configures the GPIOs
enabled = <0|1>
- Enable/disable the peripheral. By default if it is enabled.
+ Enable/disable the peripheral. By default if it is enabled.
baseaddr = <hex_value>
- address of first GPIO register for this device
+ address of first GPIO register for this device
irq = <value>
- irq number for this device
+ irq number for this device
base_vapi_id = <hex_value>
- first VAPI id of this instance
+ first VAPI id of this instance
GPIO uses 8 consecutive VAPI IDs
*/
@@ -736,19 +736,19 @@ end
This section configures the VGA/LCD controller
enabled = <0|1>
- Enable/disable the peripheral. By default if it is enabled.
+ Enable/disable the peripheral. By default if it is enabled.
baseaddr = <hex_value>
- address of first VGA register
+ address of first VGA register
irq = <value>
- irq number for this device
+ irq number for this device
refresh_rate = <value>
- number of cycles between screen dumps
+ number of cycles between screen dumps
filename = "<filename>"
- template name for generated names (e.g. "primary" produces "primary0023.bmp")
+ template name for generated names (e.g. "primary" produces "primary0023.bmp")
*/
section vga
@@ -825,39 +825,39 @@ end
This section configures the ATA/ATAPI host controller
baseaddr = <hex_value>
- address of first ATA register
+ address of first ATA register
enabled = <0|1>
- Enable/disable the peripheral. By default if it is enabled.
+ Enable/disable the peripheral. By default if it is enabled.
irq = <value>
- irq number for this device
+ irq number for this device
debug = <value>
- debug level for ata models.
+ debug level for ata models.
0: no debug messages
1: verbose messages
3: normal messages (more messages than verbose)
- 5: debug messages (normal debug messages)
+ 5: debug messages (normal debug messages)
7: flow control messages (debug statemachine flows)
9: low priority message (display everything the code does)
dev_type0/1 = <value>
- ata device 0 type
- 0: NO_CONNeCT: none (not connected)
+ ata device 0 type
+ 0: NO_CONNeCT: none (not connected)
1: FILE : simulated harddisk
2: LOCAL : local system harddisk
dev_file0/1 = "<filename>"
- filename for simulated ATA device
+ filename for simulated ATA device
valid only if dev_type0 == 1
dev_size0/1 = <value>
- size of simulated hard-disk (in MBytes)
+ size of simulated hard-disk (in MBytes)
valid only if dev_type0 == 1
dev_packet0/1 = <value>
- 0: simulated ATA device does NOT implement PACKET command feature set
+ 0: simulated ATA device does NOT implement PACKET command feature set
1: simulated ATA device does implement PACKET command feature set
FIXME: irq number
diff --git a/board/ppmc8260/strataflash.c b/board/ppmc8260/strataflash.c
index 03d36ee..ea3c42e 100644
--- a/board/ppmc8260/strataflash.c
+++ b/board/ppmc8260/strataflash.c
@@ -407,7 +407,7 @@ static int flash_full_status_check(flash_info_t * info, ulong sector, ulong tout
printf("Command Sequence Error.\n");
} else if(flash_isset(info, sector, 0, FLASH_STATUS_ECLBS)){
printf("Block Erase Error.\n");
- retcode = ERR_NOT_ERASED;
+ retcode = ERR_NOT_ERASED;
} else if (flash_isset(info, sector, 0, FLASH_STATUS_PSLBS)) {
printf("Locking Error\n");
}
diff --git a/board/pxa255_idp/pxa_reg_calcs.py b/board/pxa255_idp/pxa_reg_calcs.py
index 786edc6..4a721d1 100644
--- a/board/pxa255_idp/pxa_reg_calcs.py
+++ b/board/pxa255_idp/pxa_reg_calcs.py
@@ -21,7 +21,7 @@ class gpio:
self.clr = clr
self.alt = alt
self.desc = desc
-
+
# the following is a dictionary of all GPIOs in the system
# the key is the GPIO number
@@ -280,8 +280,8 @@ for reg in registers:
# print define to past right into U-Boot source code
-print
-print
+print
+print
for reg in registers:
print '#define %s 0x%x' % (uboot_reg_names[reg], pxa_regs[reg])
diff --git a/board/rbc823/rbc823.c b/board/rbc823/rbc823.c
index f276e5e..5881111 100644
--- a/board/rbc823/rbc823.c
+++ b/board/rbc823/rbc823.c
@@ -78,7 +78,7 @@ const uint static_table[] =
0x0FFFFC04, 0x0FF3FC04, 0x0FF3CC04, 0x0FF3CC04,
0x0FF3EC04, 0x0FF3CC00, 0x0FF7FC04, 0x3FFFFC04,
0xFFFFFC04, 0xFFFFFC05, /* last */
- _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
diff --git a/board/samsung/dts/exynos5250-snow.dts b/board/samsung/dts/exynos5250-snow.dts
index 9b7e57e..12cd67e 100644
--- a/board/samsung/dts/exynos5250-snow.dts
+++ b/board/samsung/dts/exynos5250-snow.dts
@@ -71,9 +71,9 @@
codec-enable-gpio = <&gpio 0xb7 0>;
};
- sound@12d60000 {
- status = "disabled";
- };
+ sound@12d60000 {
+ status = "disabled";
+ };
i2c@12cd0000 {
soundcodec@22 {
diff --git a/board/svm_sc8xx/svm_sc8xx.c b/board/svm_sc8xx/svm_sc8xx.c
index a508595..5db4850 100644
--- a/board/svm_sc8xx/svm_sc8xx.c
+++ b/board/svm_sc8xx/svm_sc8xx.c
@@ -139,6 +139,6 @@ phys_size_t initdram (int board_type)
#if defined(CONFIG_CMD_DOC)
void doc_init (void)
{
- doc_probe (CONFIG_SYS_DOC_BASE);
+ doc_probe (CONFIG_SYS_DOC_BASE);
}
#endif