diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/freescale/mx50_rdp/flash_header.S | 46 |
1 files changed, 22 insertions, 24 deletions
diff --git a/board/freescale/mx50_rdp/flash_header.S b/board/freescale/mx50_rdp/flash_header.S index 5215ee8..12b1a82 100644 --- a/board/freescale/mx50_rdp/flash_header.S +++ b/board/freescale/mx50_rdp/flash_header.S @@ -40,7 +40,7 @@ pu_loop: cmp r1, #0x20 beq pu_out - ;(pd + 1) << 24 | (pu + 1) << 16 + // (pd + 1) << 24 | (pu + 1) << 16 ldr r2, =0x0 add r2, r2, #0x1 add r1, r1, #0x1 @@ -52,13 +52,11 @@ pu_loop: sub r2, r2, #0x1 sub r1, r1, #0x1 - ;(pd << 8) | pu + // (pd << 8) | pu mov r3, r1 // Set SW_CFG2 str r3, [r0, #0x12c] - sub r1, r1, #0x1 - // Start ZQ comparator ldr r2, =0x10000 str r2, [r0, #0x124] @@ -95,7 +93,7 @@ pd_loop: cmp r2, #0xf beq pd_out - ; (pd + 1) << 24 | (pu + 1) << 16 | 1 << 4 + // (pd + 1) << 24 | (pu + 1) << 16 | 1 << 4 add r2, r2, #0x1 add r1, r1, #0x1 mov r3, r2, lsl #24 @@ -106,7 +104,7 @@ pd_loop: sub r2, r2, #0x1 sub r1, r1, #0x1 - ;(pd << 8) | pu + // (pd << 8) | pu mov r3, r2, LSL #8 orr r3, r3, r1 // Set SW_CFG2 @@ -146,7 +144,7 @@ pd_out: sub r2, r2, #0x2 #if defined(CONFIG_LPDDR2) - ; Pd add 3 + // Pd add 3 add r2, r2, #0x3 /*============================================================================= @@ -157,80 +155,80 @@ pu_loop_pd: cmp r1, #0x20 beq pu_out_pd - ; (pd + 1) << 24 | (pu + 1) << 16 | 1 << 4 + // (pd + 1) << 24 | (pu + 1) << 16 | 1 << 4 add r2, r2, #0x1 add r1, r1, #0x1 mov r3, r2, LSL #24 orr r3, r3, r1, LSL #16 orr r3, r3, #0x10 - ;Set SW_CFG1 + // Set SW_CFG1 str r3, [r0,#0x128] sub r2, r2, #0x1 sub r1, r1, #0x1 - ;(pd << 8) | pu + // (pd << 8) | pu mov r3, r2, LSL #8 orr r3, r3, r1 - ;Set SW_CFG2 + // Set SW_CFG2 str r3, [r0,#0x12c] - ;Start ZQ comparator + // Start ZQ comparator ldr r3, =0x10000 str r3, [r0,#0x124] - ;Delay 300ns at least + // Delay 300ns at least ldr r3, =0x0 pu_delay_pd: add r3, r3, #0x1 cmp r3,#0x1000 bne pu_delay_pd - ;Read compare result + // Read compare result ldr r3, [r0, #0x14c] and r3, r3, #0x1 - ;Stop ZQ comparator + // Stop ZQ comparator ldr r8, =0x0 str r8, [r0,#0x124] - ;Add pu value + // Add pu value add r1, r1, #0x1 cmp r3, #0x1 bne pu_loop_pd pu_out_pd: - ;Pu calibration result in r1 + // Pu calibration result in r1 sub r1, r1, #0x1 #endif /*============================================================================= * Software load PU/PD value,PU is stored in r1, and PD is stored in r2 *===========================================================================*/ - ;(pd << 8) | pu + // (pd << 8) | pu mov r3, r2, LSL #8 orr r3, r3, r1 - ;Set SW_CFG2 + // Set SW_CFG2 str r3, [r0, #0x12c] - ;((pd + 1) << 24) | ((pu + 1) <<16) + // ((pd + 1) << 24) | ((pu + 1) <<16) add r2, r2, #0x1 add r1, r1, #0x1 mov r3, r2, LSL #24 orr r3, r3, r1, LSL #16 - ;Load PU, pu_pd_sel=0 + // Load PU, pu_pd_sel=0 str r3, [r0, #0x128] - ;Set SW_CFG + // Set SW_CFG ldr r1, =0x00310000 str r1, [r0, #0x124] ldr r2, =0x00200000 str r2, [r0, #0x124] - ;Load PD, pu_pd_sel=1 + // Load PD, pu_pd_sel=1 orr r3, r3, #0x10 str r3, [r0, #0x128] - ;Set SW_CFG + // Set SW_CFG str r1, [r0, #0x124] str r2, [r0, #0x124] .endm |