diff options
Diffstat (limited to 'board')
45 files changed, 2178 insertions, 210 deletions
diff --git a/board/amcc/taihu/taihu.c b/board/amcc/taihu/taihu.c index eedde59..891b4d9 100644 --- a/board/amcc/taihu/taihu.c +++ b/board/amcc/taihu/taihu.c @@ -165,16 +165,20 @@ unsigned char spi_read(void) return (unsigned char)gpio_read_in_bit(SPI_DIN_GPIO15); } -void taihu_spi_chipsel(int cs) +int spi_cs_is_valid(unsigned int bus, unsigned int cs) { - gpio_write_bit(SPI_CS_GPIO0, cs); + return bus == 0 && cs == 0; } -spi_chipsel_type spi_chipsel[]= { - taihu_spi_chipsel -}; +void spi_cs_activate(struct spi_slave *slave) +{ + gpio_write_bit(SPI_CS_GPIO0, 1); +} -int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]); +void spi_cs_deactivate(struct spi_slave *slave) +{ + gpio_write_bit(SPI_CS_GPIO0, 0); +} #ifdef CONFIG_PCI static unsigned char int_lines[32] = { diff --git a/board/atmel/at91cap9adk/Makefile b/board/atmel/at91cap9adk/Makefile index e33af76..f2b9c12 100644 --- a/board/atmel/at91cap9adk/Makefile +++ b/board/atmel/at91cap9adk/Makefile @@ -2,6 +2,10 @@ # (C) Copyright 2003-2008 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # +# (C) Copyright 2008 +# Stelian Pop <stelian.pop@leadtechdesign.com> +# Lead Tech Design <www.leadtechdesign.com> +# # See file CREDITS for list of people who contributed to this # project. # diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c index 5de52b9..a3eaf19 100644 --- a/board/atmel/at91cap9adk/at91cap9adk.c +++ b/board/atmel/at91cap9adk/at91cap9adk.c @@ -30,6 +30,8 @@ #include <asm/arch/at91_rstc.h> #include <asm/arch/gpio.h> #include <asm/arch/io.h> +#include <lcd.h> +#include <atmel_lcdc.h> #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) #include <net.h> #endif @@ -70,6 +72,33 @@ static void at91cap9_serial_hw_init(void) #endif } +static void at91cap9_slowclock_hw_init(void) +{ + /* + * On AT91CAP9 revC CPUs, the slow clock can be based on an + * internal impreciseRC oscillator or an external 32kHz oscillator. + * Switch to the latter. + */ +#define ARCH_ID_AT91CAP9_REVB 0x399 +#define ARCH_ID_AT91CAP9_REVC 0x601 + if (at91_sys_read(AT91_PMC_VER) == ARCH_ID_AT91CAP9_REVC) { + unsigned i, tmp = at91_sys_read(AT91_SCKCR); + if ((tmp & AT91CAP9_SCKCR_OSCSEL) == AT91CAP9_SCKCR_OSCSEL_RC) { + extern void timer_init(void); + timer_init(); + tmp |= AT91CAP9_SCKCR_OSC32EN; + at91_sys_write(AT91_SCKCR, tmp); + for (i = 0; i < 1200; i++) + udelay(1000); + tmp |= AT91CAP9_SCKCR_OSCSEL_32; + at91_sys_write(AT91_SCKCR, tmp); + udelay(200); + tmp &= ~AT91CAP9_SCKCR_RCEN; + at91_sys_write(AT91_SCKCR, tmp); + } + } +} + static void at91cap9_nor_hw_init(void) { unsigned long csa; @@ -116,7 +145,12 @@ static void at91cap9_nand_hw_init(void) at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | - AT91_SMC_DBW_8 | AT91_SMC_TDF_(1)); +#ifdef CFG_NAND_DBW_16 + AT91_SMC_DBW_16 | +#else /* CFG_NAND_DBW_8 */ + AT91_SMC_DBW_8 | +#endif + AT91_SMC_TDF_(1)); at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD); @@ -228,6 +262,65 @@ static void at91cap9_uhp_hw_init(void) } #endif +#ifdef CONFIG_LCD +vidinfo_t panel_info = { + vl_col: 240, + vl_row: 320, + vl_clk: 4965000, + vl_sync: ATMEL_LCDC_INVLINE_INVERTED | + ATMEL_LCDC_INVFRAME_INVERTED, + vl_bpix: 3, + vl_tft: 1, + vl_hsync_len: 5, + vl_left_margin: 1, + vl_right_margin:33, + vl_vsync_len: 1, + vl_upper_margin:1, + vl_lower_margin:0, + mmio: AT91CAP9_LCDC_BASE, +}; + +void lcd_enable(void) +{ + at91_set_gpio_value(AT91_PIN_PC0, 0); /* power up */ +} + +void lcd_disable(void) +{ + at91_set_gpio_value(AT91_PIN_PC0, 1); /* power down */ +} + +static void at91cap9_lcd_hw_init(void) +{ + at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ + at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ + at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ + at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */ + at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */ + at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */ + at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */ + at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */ + at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */ + at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */ + at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */ + at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */ + at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */ + at91_set_A_periph(AT91_PIN_PC17, 0); /* LCDD13 */ + at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */ + at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */ + at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */ + at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */ + at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */ + at91_set_A_periph(AT91_PIN_PC25, 0); /* LCDD21 */ + at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */ + at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */ + + at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_LCDC); + + gd->fb_base = 0; +} +#endif + int board_init(void) { /* Enable Ctrlc */ @@ -239,6 +332,7 @@ int board_init(void) gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; at91cap9_serial_hw_init(); + at91cap9_slowclock_hw_init(); at91cap9_nor_hw_init(); #ifdef CONFIG_CMD_NAND at91cap9_nand_hw_init(); @@ -252,7 +346,9 @@ int board_init(void) #ifdef CONFIG_USB_OHCI_NEW at91cap9_uhp_hw_init(); #endif - +#ifdef CONFIG_LCD + at91cap9_lcd_hw_init(); +#endif return 0; } diff --git a/board/atmel/at91cap9adk/nand.c b/board/atmel/at91cap9adk/nand.c index 28091a4..0432ef1 100644 --- a/board/atmel/at91cap9adk/nand.c +++ b/board/atmel/at91cap9adk/nand.c @@ -63,6 +63,9 @@ static void at91cap9adk_nand_hwcontrol(struct mtd_info *mtd, int cmd) int board_nand_init(struct nand_chip *nand) { nand->eccmode = NAND_ECC_SOFT; +#ifdef CFG_NAND_DBW_16 + nand->options = NAND_BUSWIDTH_16; +#endif nand->hwcontrol = at91cap9adk_nand_hwcontrol; nand->chip_delay = 20; diff --git a/board/atmel/at91cap9adk/u-boot.lds b/board/atmel/at91cap9adk/u-boot.lds deleted file mode 100644 index 996f401..0000000 --- a/board/atmel/at91cap9adk/u-boot.lds +++ /dev/null @@ -1,57 +0,0 @@ -/* - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN(4); - .text : - { - cpu/arm926ejs/start.o (.text) - *(.text) - } - - . = ALIGN(4); - .rodata : { *(.rodata) } - - . = ALIGN(4); - .data : { *(.data) } - - . = ALIGN(4); - .got : { *(.got) } - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = ALIGN(4); - __bss_start = .; - .bss : { *(.bss) } - _end = .; -} diff --git a/board/atmel/at91sam9260ek/Makefile b/board/atmel/at91sam9260ek/Makefile index e6e4082..f93540a 100644 --- a/board/atmel/at91sam9260ek/Makefile +++ b/board/atmel/at91sam9260ek/Makefile @@ -2,6 +2,10 @@ # (C) Copyright 2003-2008 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # +# (C) Copyright 2008 +# Stelian Pop <stelian.pop@leadtechdesign.com> +# Lead Tech Design <www.leadtechdesign.com> +# # See file CREDITS for list of people who contributed to this # project. # diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index b30aad8..ef4d486 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -90,7 +90,12 @@ static void at91sam9260ek_nand_hw_init(void) at91_sys_write(AT91_SMC_MODE(3), AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | - AT91_SMC_DBW_8 | AT91_SMC_TDF_(2)); +#ifdef CFG_NAND_DBW_16 + AT91_SMC_DBW_16 | +#else /* CFG_NAND_DBW_8 */ + AT91_SMC_DBW_8 | +#endif + AT91_SMC_TDF_(2)); at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); diff --git a/board/atmel/at91sam9260ek/nand.c b/board/atmel/at91sam9260ek/nand.c index 7c1e6ab..9738f0f 100644 --- a/board/atmel/at91sam9260ek/nand.c +++ b/board/atmel/at91sam9260ek/nand.c @@ -68,6 +68,9 @@ static int at91sam9260ek_nand_ready(struct mtd_info *mtd) int board_nand_init(struct nand_chip *nand) { nand->eccmode = NAND_ECC_SOFT; +#ifdef CFG_NAND_DBW_16 + nand->options = NAND_BUSWIDTH_16; +#endif nand->hwcontrol = at91sam9260ek_nand_hwcontrol; nand->dev_ready = at91sam9260ek_nand_ready; nand->chip_delay = 20; diff --git a/board/atmel/at91sam9260ek/u-boot.lds b/board/atmel/at91sam9260ek/u-boot.lds deleted file mode 100644 index 996f401..0000000 --- a/board/atmel/at91sam9260ek/u-boot.lds +++ /dev/null @@ -1,57 +0,0 @@ -/* - * (C) Copyright 2002 - * Gary Jennejohn, DENX Software Engineering, <gj@denx.de> - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm") -/*OUTPUT_FORMAT("elf32-arm", "elf32-arm", "elf32-arm")*/ -OUTPUT_ARCH(arm) -ENTRY(_start) -SECTIONS -{ - . = 0x00000000; - - . = ALIGN(4); - .text : - { - cpu/arm926ejs/start.o (.text) - *(.text) - } - - . = ALIGN(4); - .rodata : { *(.rodata) } - - . = ALIGN(4); - .data : { *(.data) } - - . = ALIGN(4); - .got : { *(.got) } - - . = .; - __u_boot_cmd_start = .; - .u_boot_cmd : { *(.u_boot_cmd) } - __u_boot_cmd_end = .; - - . = ALIGN(4); - __bss_start = .; - .bss : { *(.bss) } - _end = .; -} diff --git a/board/atmel/at91sam9261ek/Makefile b/board/atmel/at91sam9261ek/Makefile new file mode 100644 index 0000000..7702a9c --- /dev/null +++ b/board/atmel/at91sam9261ek/Makefile @@ -0,0 +1,57 @@ +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Stelian Pop <stelian.pop@leadtechdesign.com> +# Lead Tech Design <www.leadtechdesign.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += at91sam9261ek.o +COBJS-y += led.o +COBJS-y += partition.o +COBJS-$(CONFIG_CMD_NAND) += nand.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c new file mode 100644 index 0000000..3de234c --- /dev/null +++ b/board/atmel/at91sam9261ek/at91sam9261ek.c @@ -0,0 +1,258 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91sam9261.h> +#include <asm/arch/at91sam9261_matrix.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> +#include <lcd.h> +#include <atmel_lcdc.h> +#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_DRIVER_DM9000) +#include <net.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* ------------------------------------------------------------------------- */ +/* + * Miscelaneous platform dependent initialisations + */ + +static void at91sam9261ek_serial_hw_init(void) +{ +#ifdef CONFIG_USART0 + at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */ + at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); +#endif + +#ifdef CONFIG_USART1 + at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */ + at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); +#endif + +#ifdef CONFIG_USART2 + at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */ + at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); +#endif + +#ifdef CONFIG_USART3 /* DBGU */ + at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */ + at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); +#endif +} + +#ifdef CONFIG_CMD_NAND +static void at91sam9261ek_nand_hw_init(void) +{ + unsigned long csa; + + /* Enable CS3 */ + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, + csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); + + /* Configure SMC CS3 for NAND/SmartMedia */ + at91_sys_write(AT91_SMC_SETUP(3), + AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | + AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)); + at91_sys_write(AT91_SMC_PULSE(3), + AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5) | + AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5)); + at91_sys_write(AT91_SMC_CYCLE(3), + AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7)); + at91_sys_write(AT91_SMC_MODE(3), + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE | +#ifdef CFG_NAND_DBW_16 + AT91_SMC_DBW_16 | +#else /* CFG_NAND_DBW_8 */ + AT91_SMC_DBW_8 | +#endif + AT91_SMC_TDF_(1)); + + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC); + + /* Configure RDY/BSY */ + at91_set_gpio_input(AT91_PIN_PC15, 1); + + /* Enable NandFlash */ + at91_set_gpio_output(AT91_PIN_PC14, 1); + + at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */ + at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */ +} +#endif + +#ifdef CONFIG_HAS_DATAFLASH +static void at91sam9261ek_spi_hw_init(void) +{ + at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */ + + at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ + at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ + at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ + + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_SPI0); +} +#endif + +#ifdef CONFIG_DRIVER_DM9000 +static void at91sam9261ek_dm9000_hw_init(void) +{ + /* Configure SMC CS2 for DM9000 */ + at91_sys_write(AT91_SMC_SETUP(2), + AT91_SMC_NWESETUP_(2) | AT91_SMC_NCS_WRSETUP_(0) | + AT91_SMC_NRDSETUP_(2) | AT91_SMC_NCS_RDSETUP_(0)); + at91_sys_write(AT91_SMC_PULSE(2), + AT91_SMC_NWEPULSE_(4) | AT91_SMC_NCS_WRPULSE_(8) | + AT91_SMC_NRDPULSE_(4) | AT91_SMC_NCS_RDPULSE_(8)); + at91_sys_write(AT91_SMC_CYCLE(2), + AT91_SMC_NWECYCLE_(16) | AT91_SMC_NRDCYCLE_(16)); + at91_sys_write(AT91_SMC_MODE(2), + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE | + AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16 | + AT91_SMC_TDF_(1)); + + /* Configure Reset signal as output */ + at91_set_gpio_output(AT91_PIN_PC10, 0); + + /* Configure Interrupt pin as input, no pull-up */ + at91_set_gpio_input(AT91_PIN_PC11, 0); +} +#endif + +#ifdef CONFIG_LCD +vidinfo_t panel_info = { + vl_col: 240, + vl_row: 320, + vl_clk: 4965000, + vl_sync: ATMEL_LCDC_INVLINE_INVERTED | + ATMEL_LCDC_INVFRAME_INVERTED, + vl_bpix: 3, + vl_tft: 1, + vl_hsync_len: 5, + vl_left_margin: 1, + vl_right_margin:33, + vl_vsync_len: 1, + vl_upper_margin:1, + vl_lower_margin:0, + mmio: AT91SAM9261_LCDC_BASE, +}; + +void lcd_enable(void) +{ + at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */ +} + +void lcd_disable(void) +{ + at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */ +} + +static void at91sam9261ek_lcd_hw_init(void) +{ + at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */ + at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */ + at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */ + at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */ + at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */ + at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */ + at91_set_A_periph(AT91_PIN_PB9, 0); /* LCDD4 */ + at91_set_A_periph(AT91_PIN_PB10, 0); /* LCDD5 */ + at91_set_A_periph(AT91_PIN_PB11, 0); /* LCDD6 */ + at91_set_A_periph(AT91_PIN_PB12, 0); /* LCDD7 */ + at91_set_A_periph(AT91_PIN_PB15, 0); /* LCDD10 */ + at91_set_A_periph(AT91_PIN_PB16, 0); /* LCDD11 */ + at91_set_A_periph(AT91_PIN_PB17, 0); /* LCDD12 */ + at91_set_A_periph(AT91_PIN_PB18, 0); /* LCDD13 */ + at91_set_A_periph(AT91_PIN_PB19, 0); /* LCDD14 */ + at91_set_A_periph(AT91_PIN_PB20, 0); /* LCDD15 */ + at91_set_B_periph(AT91_PIN_PB23, 0); /* LCDD18 */ + at91_set_B_periph(AT91_PIN_PB24, 0); /* LCDD19 */ + at91_set_B_periph(AT91_PIN_PB25, 0); /* LCDD20 */ + at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */ + at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */ + at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */ + + at91_sys_write(AT91_PMC_SCER, AT91_PMC_HCK1); + + gd->fb_base = AT91SAM9261_SRAM_BASE; +} +#endif + +int board_init(void) +{ + /* Enable Ctrlc */ + console_init_f(); + + /* arch number of AT91SAM9261EK-Board */ + gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9261EK; + /* adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + at91sam9261ek_serial_hw_init(); +#ifdef CONFIG_CMD_NAND + at91sam9261ek_nand_hw_init(); +#endif +#ifdef CONFIG_HAS_DATAFLASH + at91sam9261ek_spi_hw_init(); +#endif +#ifdef CONFIG_DRIVER_DM9000 + at91sam9261ek_dm9000_hw_init(); +#endif +#ifdef CONFIG_LCD + at91sam9261ek_lcd_hw_init(); +#endif + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM; + gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + return 0; +} + +#ifdef CONFIG_RESET_PHY_R +void reset_phy(void) +{ +#ifdef CONFIG_DRIVER_DM9000 + /* + * Initialize ethernet HW addr prior to starting Linux, + * needed for nfsroot + */ + eth_init(gd->bd); +#endif +} +#endif diff --git a/board/atmel/at91sam9261ek/config.mk b/board/atmel/at91sam9261ek/config.mk new file mode 100644 index 0000000..ff2cfd1 --- /dev/null +++ b/board/atmel/at91sam9261ek/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0x23f00000 diff --git a/board/atmel/at91sam9261ek/led.c b/board/atmel/at91sam9261ek/led.c new file mode 100644 index 0000000..eb2bb23 --- /dev/null +++ b/board/atmel/at91sam9261ek/led.c @@ -0,0 +1,78 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91sam9261.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> + +#define RED_LED AT91_PIN_PA23 /* this is the power led */ +#define GREEN_LED AT91_PIN_PA13 /* this is the user1 led */ +#define YELLOW_LED AT91_PIN_PA14 /* this is the user2 led */ + +void red_LED_on(void) +{ + at91_set_gpio_value(RED_LED, 1); +} + +void red_LED_off(void) +{ + at91_set_gpio_value(RED_LED, 0); +} + +void green_LED_on(void) +{ + at91_set_gpio_value(GREEN_LED, 0); +} + +void green_LED_off(void) +{ + at91_set_gpio_value(GREEN_LED, 1); +} + +void yellow_LED_on(void) +{ + at91_set_gpio_value(YELLOW_LED, 0); +} + +void yellow_LED_off(void) +{ + at91_set_gpio_value(YELLOW_LED, 1); +} + + +void coloured_LED_init(void) +{ + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOA); + + at91_set_gpio_output(RED_LED, 1); + at91_set_gpio_output(GREEN_LED, 1); + at91_set_gpio_output(YELLOW_LED, 1); + + at91_set_gpio_value(RED_LED, 0); + at91_set_gpio_value(GREEN_LED, 1); + at91_set_gpio_value(YELLOW_LED, 1); +} diff --git a/board/atmel/at91sam9261ek/nand.c b/board/atmel/at91sam9261ek/nand.c new file mode 100644 index 0000000..35b26db --- /dev/null +++ b/board/atmel/at91sam9261ek/nand.c @@ -0,0 +1,79 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91sam9261.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91_pio.h> + +#include <nand.h> + +/* + * hardware specific access to control-lines + */ +#define MASK_ALE (1 << 22) /* our ALE is AD22 */ +#define MASK_CLE (1 << 21) /* our CLE is AD21 */ + +static void at91sam9261ek_nand_hwcontrol(struct mtd_info *mtd, int cmd) +{ + struct nand_chip *this = mtd->priv; + ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; + + IO_ADDR_W &= ~(MASK_ALE|MASK_CLE); + switch (cmd) { + case NAND_CTL_SETCLE: + IO_ADDR_W |= MASK_CLE; + break; + case NAND_CTL_SETALE: + IO_ADDR_W |= MASK_ALE; + break; + case NAND_CTL_CLRNCE: + at91_set_gpio_value(AT91_PIN_PC14, 1); + break; + case NAND_CTL_SETNCE: + at91_set_gpio_value(AT91_PIN_PC14, 0); + break; + } + this->IO_ADDR_W = (void *) IO_ADDR_W; +} + +static int at91sam9261ek_nand_ready(struct mtd_info *mtd) +{ + return at91_get_gpio_value(AT91_PIN_PC15); +} + +int board_nand_init(struct nand_chip *nand) +{ + nand->eccmode = NAND_ECC_SOFT; +#ifdef CFG_NAND_DBW_16 + nand->options = NAND_BUSWIDTH_16; +#endif + nand->hwcontrol = at91sam9261ek_nand_hwcontrol; + nand->dev_ready = at91sam9261ek_nand_ready; + nand->chip_delay = 20; + + return 0; +} diff --git a/board/atmel/at91sam9261ek/partition.c b/board/atmel/at91sam9261ek/partition.c new file mode 100644 index 0000000..975be17 --- /dev/null +++ b/board/atmel/at91sam9261ek/partition.c @@ -0,0 +1,40 @@ +/* + * (C) Copyright 2008 + * Ulf Samuelsson <ulf@atmel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +#include <common.h> +#include <config.h> +#include <asm/hardware.h> +#include <dataflash.h> + +AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS]; + +struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = { + {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ + {CFG_DATAFLASH_LOGIC_ADDR_CS3, 3} +}; + +/*define the area offsets*/ +dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { + {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, + {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, + {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, + {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"}, + {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"}, +}; diff --git a/board/atmel/at91sam9263ek/Makefile b/board/atmel/at91sam9263ek/Makefile new file mode 100644 index 0000000..5adb0bc --- /dev/null +++ b/board/atmel/at91sam9263ek/Makefile @@ -0,0 +1,57 @@ +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Stelian Pop <stelian.pop@leadtechdesign.com> +# Lead Tech Design <www.leadtechdesign.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += at91sam9263ek.o +COBJS-y += led.o +COBJS-y += partition.o +COBJS-$(CONFIG_CMD_NAND) += nand.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c new file mode 100644 index 0000000..ba7fc71 --- /dev/null +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -0,0 +1,305 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/sizes.h> +#include <asm/arch/at91sam9263.h> +#include <asm/arch/at91sam9263_matrix.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> +#include <lcd.h> +#include <atmel_lcdc.h> +#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) +#include <net.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* ------------------------------------------------------------------------- */ +/* + * Miscelaneous platform dependent initialisations + */ + +static void at91sam9263ek_serial_hw_init(void) +{ +#ifdef CONFIG_USART0 + at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */ + at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); +#endif + +#ifdef CONFIG_USART1 + at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ + at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); +#endif + +#ifdef CONFIG_USART2 + at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ + at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); +#endif + +#ifdef CONFIG_USART3 /* DBGU */ + at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ + at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); +#endif +} + +#ifdef CONFIG_CMD_NAND +static void at91sam9263ek_nand_hw_init(void) +{ + unsigned long csa; + + /* Enable CS3 */ + csa = at91_sys_read(AT91_MATRIX_EBI0CSA); + at91_sys_write(AT91_MATRIX_EBI0CSA, + csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA); + + /* Configure SMC CS3 for NAND/SmartMedia */ + at91_sys_write(AT91_SMC_SETUP(3), + AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | + AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)); + at91_sys_write(AT91_SMC_PULSE(3), + AT91_SMC_NWEPULSE_(3) | AT91_SMC_NCS_WRPULSE_(3) | + AT91_SMC_NRDPULSE_(3) | AT91_SMC_NCS_RDPULSE_(3)); + at91_sys_write(AT91_SMC_CYCLE(3), + AT91_SMC_NWECYCLE_(5) | AT91_SMC_NRDCYCLE_(5)); + at91_sys_write(AT91_SMC_MODE(3), + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE | +#ifdef CFG_NAND_DBW_16 + AT91_SMC_DBW_16 | +#else /* CFG_NAND_DBW_8 */ + AT91_SMC_DBW_8 | +#endif + AT91_SMC_TDF_(2)); + + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOA | + 1 << AT91SAM9263_ID_PIOCDE); + + /* Configure RDY/BSY */ + at91_set_gpio_input(AT91_PIN_PA22, 1); + + /* Enable NandFlash */ + at91_set_gpio_output(AT91_PIN_PD15, 1); +} +#endif + +#ifdef CONFIG_HAS_DATAFLASH +static void at91sam9263ek_spi_hw_init(void) +{ + at91_set_B_periph(AT91_PIN_PA5, 0); /* SPI0_NPCS0 */ + + at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ + at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ + at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ + + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_SPI0); +} +#endif + +#ifdef CONFIG_MACB +static void at91sam9263ek_macb_hw_init(void) +{ + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_EMAC); + + /* + * Disable pull-up on: + * RXDV (PC25) => PHY normal mode (not Test mode) + * ERX0 (PE25) => PHY ADDR0 + * ERX1 (PE26) => PHY ADDR1 => PHYADDR = 0x0 + * + * PHY has internal pull-down + */ + writel(pin_to_mask(AT91_PIN_PC25), + pin_to_controller(AT91_PIN_PC0) + PIO_PUDR); + writel(pin_to_mask(AT91_PIN_PE25) | + pin_to_mask(AT91_PIN_PE26), + pin_to_controller(AT91_PIN_PE0) + PIO_PUDR); + + /* Need to reset PHY -> 500ms reset */ + at91_sys_write(AT91_RSTC_MR, AT91_RSTC_KEY | + AT91_RSTC_ERSTL | (0x0D << 8) | + AT91_RSTC_URSTEN); + + at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_EXTRST); + + /* Wait for end hardware reset */ + while (!(at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_NRSTL)); + + /* Re-enable pull-up */ + writel(pin_to_mask(AT91_PIN_PC25), + pin_to_controller(AT91_PIN_PC0) + PIO_PUER); + writel(pin_to_mask(AT91_PIN_PE25) | + pin_to_mask(AT91_PIN_PE26), + pin_to_controller(AT91_PIN_PE0) + PIO_PUER); + + at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */ + at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */ + at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */ + at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */ + at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */ + at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */ + at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */ + at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */ + at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */ + at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */ + +#ifndef CONFIG_RMII + at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */ + at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */ + at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */ + at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */ + at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */ + at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */ + at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */ + at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */ +#endif + +} +#endif + +#ifdef CONFIG_USB_OHCI_NEW +static void at91sam9263ek_uhp_hw_init(void) +{ + /* Enable VBus on UHP ports */ + at91_set_gpio_output(AT91_PIN_PA21, 0); + at91_set_gpio_output(AT91_PIN_PA24, 0); +} +#endif + +#ifdef CONFIG_LCD +vidinfo_t panel_info = { + vl_col: 240, + vl_row: 320, + vl_clk: 4965000, + vl_sync: ATMEL_LCDC_INVLINE_INVERTED | + ATMEL_LCDC_INVFRAME_INVERTED, + vl_bpix: 3, + vl_tft: 1, + vl_hsync_len: 5, + vl_left_margin: 1, + vl_right_margin:33, + vl_vsync_len: 1, + vl_upper_margin:1, + vl_lower_margin:0, + mmio: AT91SAM9263_LCDC_BASE, +}; + +void lcd_enable(void) +{ + at91_set_gpio_value(AT91_PIN_PA30, 1); /* power up */ +} + +void lcd_disable(void) +{ + at91_set_gpio_value(AT91_PIN_PA30, 0); /* power down */ +} + +static void at91sam9263ek_lcd_hw_init(void) +{ + at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ + at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ + at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ + at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */ + at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */ + at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */ + at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */ + at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */ + at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */ + at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */ + at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */ + at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */ + at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */ + at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */ + at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */ + at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */ + at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */ + at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */ + at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */ + at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */ + at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */ + at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */ + + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_LCDC); + + gd->fb_base = AT91SAM9263_SRAM0_BASE; +} +#endif + +int board_init(void) +{ + /* Enable Ctrlc */ + console_init_f(); + + /* arch number of AT91SAM9263EK-Board */ + gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9263EK; + /* adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + at91sam9263ek_serial_hw_init(); +#ifdef CONFIG_CMD_NAND + at91sam9263ek_nand_hw_init(); +#endif +#ifdef CONFIG_HAS_DATAFLASH + at91sam9263ek_spi_hw_init(); +#endif +#ifdef CONFIG_MACB + at91sam9263ek_macb_hw_init(); +#endif +#ifdef CONFIG_USB_OHCI_NEW + at91sam9263ek_uhp_hw_init(); +#endif +#ifdef CONFIG_LCD + at91sam9263ek_lcd_hw_init(); +#endif + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM; + gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + return 0; +} + +#ifdef CONFIG_RESET_PHY_R +void reset_phy(void) +{ +#ifdef CONFIG_MACB + /* + * Initialize ethernet HW addr prior to starting Linux, + * needed for nfsroot + */ + eth_init(gd->bd); +#endif +} +#endif diff --git a/board/atmel/at91sam9263ek/config.mk b/board/atmel/at91sam9263ek/config.mk new file mode 100644 index 0000000..ff2cfd1 --- /dev/null +++ b/board/atmel/at91sam9263ek/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0x23f00000 diff --git a/board/atmel/at91sam9263ek/led.c b/board/atmel/at91sam9263ek/led.c new file mode 100644 index 0000000..eb8d6ca --- /dev/null +++ b/board/atmel/at91sam9263ek/led.c @@ -0,0 +1,78 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91sam9263.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> + +#define RED_LED AT91_PIN_PB7 /* this is the power led */ +#define GREEN_LED AT91_PIN_PB8 /* this is the user1 led */ +#define YELLOW_LED AT91_PIN_PC29 /* this is the user2 led */ + +void red_LED_on(void) +{ + at91_set_gpio_value(RED_LED, 1); +} + +void red_LED_off(void) +{ + at91_set_gpio_value(RED_LED, 0); +} + +void green_LED_on(void) +{ + at91_set_gpio_value(GREEN_LED, 0); +} + +void green_LED_off(void) +{ + at91_set_gpio_value(GREEN_LED, 1); +} + +void yellow_LED_on(void) +{ + at91_set_gpio_value(YELLOW_LED, 0); +} + +void yellow_LED_off(void) +{ + at91_set_gpio_value(YELLOW_LED, 1); +} + +void coloured_LED_init(void) +{ + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOB | + 1 << AT91SAM9263_ID_PIOCDE); + + at91_set_gpio_output(RED_LED, 1); + at91_set_gpio_output(GREEN_LED, 1); + at91_set_gpio_output(YELLOW_LED, 1); + + at91_set_gpio_value(RED_LED, 0); + at91_set_gpio_value(GREEN_LED, 1); + at91_set_gpio_value(YELLOW_LED, 1); +} diff --git a/board/atmel/at91sam9263ek/nand.c b/board/atmel/at91sam9263ek/nand.c new file mode 100644 index 0000000..5079972 --- /dev/null +++ b/board/atmel/at91sam9263ek/nand.c @@ -0,0 +1,79 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91sam9263.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91_pio.h> + +#include <nand.h> + +/* + * hardware specific access to control-lines + */ +#define MASK_ALE (1 << 21) /* our ALE is AD21 */ +#define MASK_CLE (1 << 22) /* our CLE is AD22 */ + +static void at91sam9263ek_nand_hwcontrol(struct mtd_info *mtd, int cmd) +{ + struct nand_chip *this = mtd->priv; + ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; + + IO_ADDR_W &= ~(MASK_ALE|MASK_CLE); + switch (cmd) { + case NAND_CTL_SETCLE: + IO_ADDR_W |= MASK_CLE; + break; + case NAND_CTL_SETALE: + IO_ADDR_W |= MASK_ALE; + break; + case NAND_CTL_CLRNCE: + at91_set_gpio_value(AT91_PIN_PD15, 1); + break; + case NAND_CTL_SETNCE: + at91_set_gpio_value(AT91_PIN_PD15, 0); + break; + } + this->IO_ADDR_W = (void *) IO_ADDR_W; +} + +static int at91sam9263ek_nand_ready(struct mtd_info *mtd) +{ + return at91_get_gpio_value(AT91_PIN_PA22); +} + +int board_nand_init(struct nand_chip *nand) +{ + nand->eccmode = NAND_ECC_SOFT; +#ifdef CFG_NAND_DBW_16 + nand->options = NAND_BUSWIDTH_16; +#endif + nand->hwcontrol = at91sam9263ek_nand_hwcontrol; + nand->dev_ready = at91sam9263ek_nand_ready; + nand->chip_delay = 20; + + return 0; +} diff --git a/board/atmel/at91sam9263ek/partition.c b/board/atmel/at91sam9263ek/partition.c new file mode 100644 index 0000000..eb1a724 --- /dev/null +++ b/board/atmel/at91sam9263ek/partition.c @@ -0,0 +1,39 @@ +/* + * (C) Copyright 2008 + * Ulf Samuelsson <ulf@atmel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +#include <common.h> +#include <config.h> +#include <asm/hardware.h> +#include <dataflash.h> + +AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS]; + +struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = { + {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ +}; + +/*define the area offsets*/ +dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { + {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, + {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, + {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, + {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"}, + {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"}, +}; diff --git a/board/atmel/at91sam9rlek/Makefile b/board/atmel/at91sam9rlek/Makefile new file mode 100644 index 0000000..a86a926 --- /dev/null +++ b/board/atmel/at91sam9rlek/Makefile @@ -0,0 +1,57 @@ +# +# (C) Copyright 2003-2008 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2008 +# Stelian Pop <stelian.pop@leadtechdesign.com> +# Lead Tech Design <www.leadtechdesign.com> +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS-y += at91sam9rlek.o +COBJS-y += led.o +COBJS-y += partition.o +COBJS-$(CONFIG_CMD_NAND) += nand.o + +SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c new file mode 100644 index 0000000..10423d2 --- /dev/null +++ b/board/atmel/at91sam9rlek/at91sam9rlek.c @@ -0,0 +1,215 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91sam9rl.h> +#include <asm/arch/at91sam9rl_matrix.h> +#include <asm/arch/at91sam9_smc.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/at91_rstc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> +#include <lcd.h> +#include <atmel_lcdc.h> +#if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB) +#include <net.h> +#endif + +DECLARE_GLOBAL_DATA_PTR; + +/* ------------------------------------------------------------------------- */ +/* + * Miscelaneous platform dependent initialisations + */ + +static void at91sam9rlek_serial_hw_init(void) +{ +#ifdef CONFIG_USART0 + at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */ + at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US0); +#endif + +#ifdef CONFIG_USART1 + at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */ + at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US1); +#endif + +#ifdef CONFIG_USART2 + at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */ + at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_US2); +#endif + +#ifdef CONFIG_USART3 /* DBGU */ + at91_set_A_periph(AT91_PIN_PA21, 0); /* DRXD */ + at91_set_A_periph(AT91_PIN_PA22, 1); /* DTXD */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); +#endif +} + +#ifdef CONFIG_CMD_NAND +static void at91sam9rlek_nand_hw_init(void) +{ + unsigned long csa; + + /* Enable CS3 */ + csa = at91_sys_read(AT91_MATRIX_EBICSA); + at91_sys_write(AT91_MATRIX_EBICSA, + csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); + + /* Configure SMC CS3 for NAND/SmartMedia */ + at91_sys_write(AT91_SMC_SETUP(3), + AT91_SMC_NWESETUP_(0) | AT91_SMC_NCS_WRSETUP_(0) | + AT91_SMC_NRDSETUP_(0) | AT91_SMC_NCS_RDSETUP_(0)); + at91_sys_write(AT91_SMC_PULSE(3), + AT91_SMC_NWEPULSE_(2) | AT91_SMC_NCS_WRPULSE_(5) | + AT91_SMC_NRDPULSE_(2) | AT91_SMC_NCS_RDPULSE_(5)); + at91_sys_write(AT91_SMC_CYCLE(3), + AT91_SMC_NWECYCLE_(7) | AT91_SMC_NRDCYCLE_(7)); + at91_sys_write(AT91_SMC_MODE(3), + AT91_SMC_READMODE | AT91_SMC_WRITEMODE | + AT91_SMC_EXNWMODE_DISABLE | +#ifdef CFG_NAND_DBW_16 + AT91_SMC_DBW_16 | +#else /* CFG_NAND_DBW_8 */ + AT91_SMC_DBW_8 | +#endif + AT91_SMC_TDF_(1)); + + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD); + + /* Configure RDY/BSY */ + at91_set_gpio_input(AT91_PIN_PD17, 1); + + /* Enable NandFlash */ + at91_set_gpio_output(AT91_PIN_PB6, 1); + + at91_set_A_periph(AT91_PIN_PB4, 0); /* NANDOE */ + at91_set_A_periph(AT91_PIN_PB5, 0); /* NANDWE */ +} +#endif + +#ifdef CONFIG_HAS_DATAFLASH +static void at91sam9rlek_spi_hw_init(void) +{ + at91_set_A_periph(AT91_PIN_PA28, 0); /* SPI0_NPCS0 */ + + at91_set_A_periph(AT91_PIN_PA25, 0); /* SPI0_MISO */ + at91_set_A_periph(AT91_PIN_PA26, 0); /* SPI0_MOSI */ + at91_set_A_periph(AT91_PIN_PA27, 0); /* SPI0_SPCK */ + + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_SPI); +} +#endif + +#ifdef CONFIG_LCD +vidinfo_t panel_info = { + vl_col: 240, + vl_row: 320, + vl_clk: 4965000, + vl_sync: ATMEL_LCDC_INVLINE_INVERTED | + ATMEL_LCDC_INVFRAME_INVERTED, + vl_bpix: 3, + vl_tft: 1, + vl_hsync_len: 5, + vl_left_margin: 1, + vl_right_margin:33, + vl_vsync_len: 1, + vl_upper_margin:1, + vl_lower_margin:0, + mmio: AT91SAM9RL_LCDC_BASE, +}; + +void lcd_enable(void) +{ + at91_set_gpio_value(AT91_PIN_PA30, 0); /* power up */ +} + +void lcd_disable(void) +{ + at91_set_gpio_value(AT91_PIN_PA30, 1); /* power down */ +} +static void at91sam9rlek_lcd_hw_init(void) +{ + at91_set_B_periph(AT91_PIN_PC1, 0); /* LCDPWR */ + at91_set_A_periph(AT91_PIN_PC5, 0); /* LCDHSYNC */ + at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDDOTCK */ + at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDDEN */ + at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDCC */ + at91_set_B_periph(AT91_PIN_PC9, 0); /* LCDD3 */ + at91_set_B_periph(AT91_PIN_PC10, 0); /* LCDD4 */ + at91_set_B_periph(AT91_PIN_PC11, 0); /* LCDD5 */ + at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD6 */ + at91_set_B_periph(AT91_PIN_PC13, 0); /* LCDD7 */ + at91_set_B_periph(AT91_PIN_PC15, 0); /* LCDD11 */ + at91_set_B_periph(AT91_PIN_PC16, 0); /* LCDD12 */ + at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD13 */ + at91_set_B_periph(AT91_PIN_PC18, 0); /* LCDD14 */ + at91_set_B_periph(AT91_PIN_PC19, 0); /* LCDD15 */ + at91_set_B_periph(AT91_PIN_PC20, 0); /* LCDD18 */ + at91_set_B_periph(AT91_PIN_PC21, 0); /* LCDD19 */ + at91_set_B_periph(AT91_PIN_PC22, 0); /* LCDD20 */ + at91_set_B_periph(AT91_PIN_PC23, 0); /* LCDD21 */ + at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */ + at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */ + + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_LCDC); + + gd->fb_base = 0; +} +#endif + + +int board_init(void) +{ + /* Enable Ctrlc */ + console_init_f(); + + /* arch number of AT91SAM9RLEK-Board */ + gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9RLEK; + /* adress of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + at91sam9rlek_serial_hw_init(); +#ifdef CONFIG_CMD_NAND + at91sam9rlek_nand_hw_init(); +#endif +#ifdef CONFIG_HAS_DATAFLASH + at91sam9rlek_spi_hw_init(); +#endif +#ifdef CONFIG_LCD + at91sam9rlek_lcd_hw_init(); +#endif + return 0; +} + +int dram_init(void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM; + gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE; + return 0; +} diff --git a/board/atmel/at91sam9rlek/config.mk b/board/atmel/at91sam9rlek/config.mk new file mode 100644 index 0000000..ff2cfd1 --- /dev/null +++ b/board/atmel/at91sam9rlek/config.mk @@ -0,0 +1 @@ +TEXT_BASE = 0x23f00000 diff --git a/board/atmel/at91sam9rlek/led.c b/board/atmel/at91sam9rlek/led.c new file mode 100644 index 0000000..8a7d8e0 --- /dev/null +++ b/board/atmel/at91sam9rlek/led.c @@ -0,0 +1,77 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91sam9rl.h> +#include <asm/arch/at91_pmc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/io.h> + +#define RED_LED AT91_PIN_PD14 /* this is the power led */ +#define GREEN_LED AT91_PIN_PD15 /* this is the user1 led */ +#define YELLOW_LED AT91_PIN_PD16 /* this is the user2 led */ + +void red_LED_on(void) +{ + at91_set_gpio_value(RED_LED, 1); +} + +void red_LED_off(void) +{ + at91_set_gpio_value(RED_LED, 0); +} + +void green_LED_on(void) +{ + at91_set_gpio_value(GREEN_LED, 0); +} + +void green_LED_off(void) +{ + at91_set_gpio_value(GREEN_LED, 1); +} + +void yellow_LED_on(void) +{ + at91_set_gpio_value(YELLOW_LED, 0); +} + +void yellow_LED_off(void) +{ + at91_set_gpio_value(YELLOW_LED, 1); +} + +void coloured_LED_init(void) +{ + /* Enable clock */ + at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD); + + at91_set_gpio_output(RED_LED, 1); + at91_set_gpio_output(GREEN_LED, 1); + at91_set_gpio_output(YELLOW_LED, 1); + + at91_set_gpio_value(RED_LED, 0); + at91_set_gpio_value(GREEN_LED, 1); + at91_set_gpio_value(YELLOW_LED, 1); +} diff --git a/board/atmel/at91sam9rlek/nand.c b/board/atmel/at91sam9rlek/nand.c new file mode 100644 index 0000000..5af1a31 --- /dev/null +++ b/board/atmel/at91sam9rlek/nand.c @@ -0,0 +1,79 @@ +/* + * (C) Copyright 2007-2008 + * Stelian Pop <stelian.pop@leadtechdesign.com> + * Lead Tech Design <www.leadtechdesign.com> + * + * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <asm/arch/at91sam9rl.h> +#include <asm/arch/gpio.h> +#include <asm/arch/at91_pio.h> + +#include <nand.h> + +/* + * hardware specific access to control-lines + */ +#define MASK_ALE (1 << 21) /* our ALE is AD21 */ +#define MASK_CLE (1 << 22) /* our CLE is AD22 */ + +static void at91sam9rlek_nand_hwcontrol(struct mtd_info *mtd, int cmd) +{ + struct nand_chip *this = mtd->priv; + ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; + + IO_ADDR_W &= ~(MASK_ALE|MASK_CLE); + switch (cmd) { + case NAND_CTL_SETCLE: + IO_ADDR_W |= MASK_CLE; + break; + case NAND_CTL_SETALE: + IO_ADDR_W |= MASK_ALE; + break; + case NAND_CTL_CLRNCE: + at91_set_gpio_value(AT91_PIN_PB6, 1); + break; + case NAND_CTL_SETNCE: + at91_set_gpio_value(AT91_PIN_PB6, 0); + break; + } + this->IO_ADDR_W = (void *) IO_ADDR_W; +} + +static int at91sam9rlek_nand_ready(struct mtd_info *mtd) +{ + return at91_get_gpio_value(AT91_PIN_PD17); +} + +int board_nand_init(struct nand_chip *nand) +{ + nand->eccmode = NAND_ECC_SOFT; +#ifdef CFG_NAND_DBW_16 + nand->options = NAND_BUSWIDTH_16; +#endif + nand->hwcontrol = at91sam9rlek_nand_hwcontrol; + nand->dev_ready = at91sam9rlek_nand_ready; + nand->chip_delay = 20; + + return 0; +} diff --git a/board/atmel/at91sam9rlek/partition.c b/board/atmel/at91sam9rlek/partition.c new file mode 100644 index 0000000..eb1a724 --- /dev/null +++ b/board/atmel/at91sam9rlek/partition.c @@ -0,0 +1,39 @@ +/* + * (C) Copyright 2008 + * Ulf Samuelsson <ulf@atmel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ +#include <common.h> +#include <config.h> +#include <asm/hardware.h> +#include <dataflash.h> + +AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS]; + +struct dataflash_addr cs[CFG_MAX_DATAFLASH_BANKS] = { + {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */ +}; + +/*define the area offsets*/ +dataflash_protect_t area_list[NB_DATAFLASH_AREA] = { + {0x00000000, 0x000041FF, FLAG_PROTECT_SET, 0, "Bootstrap"}, + {0x00004200, 0x000083FF, FLAG_PROTECT_CLEAR, 0, "Environment"}, + {0x00008400, 0x00041FFF, FLAG_PROTECT_SET, 0, "U-Boot"}, + {0x00042000, 0x00251FFF, FLAG_PROTECT_CLEAR, 0, "Kernel"}, + {0x00252000, 0xFFFFFFFF, FLAG_PROTECT_CLEAR, 0, "FS"}, +}; diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c index 1ccbe2c..c649855 100644 --- a/board/atmel/atngw100/atngw100.c +++ b/board/atmel/atngw100/atngw100.c @@ -25,12 +25,12 @@ #include <asm/sdram.h> #include <asm/arch/clk.h> #include <asm/arch/gpio.h> -#include <asm/arch/hmatrix2.h> +#include <asm/arch/hmatrix.h> DECLARE_GLOBAL_DATA_PTR; -static const struct sdram_info sdram = { - .phys_addr = CFG_SDRAM_BASE, +static const struct sdram_config sdram_config = { + .data_bits = SDRAM_DATA_16BIT, .row_bits = 13, .col_bits = 9, .bank_bits = 2, @@ -47,8 +47,8 @@ static const struct sdram_info sdram = { int board_early_init_f(void) { - /* Set the SDRAM_ENABLE bit in the HEBI SFR */ - hmatrix2_writel(SFR4, 1 << 1); + /* Enable SDRAM in the EBI mux */ + hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE)); gpio_enable_ebi(); gpio_enable_usart1(); @@ -66,7 +66,22 @@ int board_early_init_f(void) long int initdram(int board_type) { - return sdram_init(&sdram); + unsigned long expected_size; + unsigned long actual_size; + void *sdram_base; + + sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE); + + expected_size = sdram_init(sdram_base, &sdram_config); + actual_size = get_ram_size(sdram_base, expected_size); + + unmap_physmem(sdram_base, EBI_SDRAM_SIZE); + + if (expected_size != actual_size) + printf("Warning: Only %u of %u MiB SDRAM is working\n", + actual_size >> 20, expected_size >> 20); + + return actual_size; } void board_init_info(void) diff --git a/board/atmel/atngw100/u-boot.lds b/board/atmel/atngw100/u-boot.lds index 34e347a..e736adf 100644 --- a/board/atmel/atngw100/u-boot.lds +++ b/board/atmel/atngw100/u-boot.lds @@ -29,17 +29,10 @@ SECTIONS . = 0; _text = .; .text : { + *(.exception.text) *(.text) *(.text.*) } - - . = ALIGN(32); - __flashprog_start = .; - .flashprog : { - *(.flashprog) - } - . = ALIGN(32); - __flashprog_end = .; _etext = .; .rodata : { diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c index 28f64c4..33bdba6 100644 --- a/board/atmel/atstk1000/atstk1000.c +++ b/board/atmel/atstk1000/atstk1000.c @@ -25,13 +25,39 @@ #include <asm/sdram.h> #include <asm/arch/clk.h> #include <asm/arch/gpio.h> -#include <asm/arch/hmatrix2.h> +#include <asm/arch/hmatrix.h> DECLARE_GLOBAL_DATA_PTR; -static const struct sdram_info sdram = { - .phys_addr = CFG_SDRAM_BASE, +static const struct sdram_config sdram_config = { +#if defined(CONFIG_ATSTK1006) + /* Dual MT48LC16M16A2-7E (64 MB) on daughterboard */ + .data_bits = SDRAM_DATA_32BIT, + .row_bits = 13, + .col_bits = 9, + .bank_bits = 2, + .cas = 2, + .twr = 2, + .trc = 7, + .trp = 2, + .trcd = 2, + .tras = 4, + .txsr = 7, + /* 7.81 us */ + .refresh_period = (781 * (SDRAMC_BUS_HZ / 1000)) / 100000, +#else + /* MT48LC2M32B2P-5 (8 MB) on motherboard */ +#ifdef CONFIG_ATSTK1004 + .data_bits = SDRAM_DATA_16BIT, +#else + .data_bits = SDRAM_DATA_32BIT, +#endif +#ifdef CONFIG_ATSTK1000_16MB_SDRAM + /* MT48LC4M32B2P-6 (16 MB) on mod'ed motherboard */ + .row_bits = 12, +#else .row_bits = 11, +#endif .col_bits = 8, .bank_bits = 2, .cas = 3, @@ -43,12 +69,13 @@ static const struct sdram_info sdram = { .txsr = 5, /* 15.6 us */ .refresh_period = (156 * (SDRAMC_BUS_HZ / 1000)) / 10000, +#endif }; int board_early_init_f(void) { - /* Set the SDRAM_ENABLE bit in the HEBI SFR */ - hmatrix2_writel(SFR4, 1 << 1); + /* Enable SDRAM in the EBI mux */ + hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE)); gpio_enable_ebi(); gpio_enable_usart1(); @@ -65,7 +92,22 @@ int board_early_init_f(void) long int initdram(int board_type) { - return sdram_init(&sdram); + unsigned long expected_size; + unsigned long actual_size; + void *sdram_base; + + sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE); + + expected_size = sdram_init(sdram_base, &sdram_config); + actual_size = get_ram_size(sdram_base, expected_size); + + unmap_physmem(sdram_base, EBI_SDRAM_SIZE); + + if (expected_size != actual_size) + printf("Warning: Only %u of %u MiB SDRAM is working\n", + actual_size >> 20, expected_size >> 20); + + return actual_size; } void board_init_info(void) diff --git a/board/atmel/atstk1000/flash.c b/board/atmel/atstk1000/flash.c index 4047825..12537f3 100644 --- a/board/atmel/atstk1000/flash.c +++ b/board/atmel/atstk1000/flash.c @@ -30,7 +30,7 @@ DECLARE_GLOBAL_DATA_PTR; flash_info_t flash_info[1]; -static void __flashprog flash_identify(uint16_t *flash, flash_info_t *info) +static void flash_identify(uint16_t *flash, flash_info_t *info) { unsigned long flags; @@ -76,7 +76,7 @@ void flash_print_info(flash_info_t *info) info->size >> 10, info->sector_count); } -int __flashprog flash_erase(flash_info_t *info, int s_first, int s_last) +int flash_erase(flash_info_t *info, int s_first, int s_last) { unsigned long flags; unsigned long start_time; @@ -154,7 +154,7 @@ int __flashprog flash_erase(flash_info_t *info, int s_first, int s_last) return ERR_OK; } -int __flashprog write_buff(flash_info_t *info, uchar *src, +int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong count) { unsigned long flags; diff --git a/board/atmel/atstk1000/u-boot.lds b/board/atmel/atstk1000/u-boot.lds index 247812e..0d3b19c 100644 --- a/board/atmel/atstk1000/u-boot.lds +++ b/board/atmel/atstk1000/u-boot.lds @@ -29,17 +29,10 @@ SECTIONS . = 0; _text = .; .text : { + *(.exception.text) *(.text) *(.text.*) } - - . = ALIGN(32); - __flashprog_start = .; - .flashprog : { - *(.flashprog) - } - . = ALIGN(32); - __flashprog_end = .; _etext = .; .rodata : { diff --git a/board/dbau1x00/dbau1x00.c b/board/dbau1x00/dbau1x00.c index a13eeeb..1be72a2 100644 --- a/board/dbau1x00/dbau1x00.c +++ b/board/dbau1x00/dbau1x00.c @@ -52,7 +52,7 @@ int checkboard (void) *sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */ - proc_id = read_32bit_cp0_register(CP0_PRID); + proc_id = read_c0_prid(); switch (proc_id >> 24) { case 0: diff --git a/board/freescale/mpc8349emds/mpc8349emds.c b/board/freescale/mpc8349emds/mpc8349emds.c index 6c82596..e18e68e 100644 --- a/board/freescale/mpc8349emds/mpc8349emds.c +++ b/board/freescale/mpc8349emds/mpc8349emds.c @@ -257,25 +257,24 @@ void sdram_init(void) #define SPI_CS_MASK 0x80000000 -void spi_eeprom_chipsel(int cs) +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs == 0; +} + +void spi_cs_activate(struct spi_slave *slave) { volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0]; - if (cs) - iopd->dat &= ~SPI_CS_MASK; - else - iopd->dat |= SPI_CS_MASK; + iopd->dat &= ~SPI_CS_MASK; } -/* - * The SPI command uses this table of functions for controlling the SPI - * chip selects. - */ -spi_chipsel_type spi_chipsel[] = { - spi_eeprom_chipsel, -}; -int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]); +void spi_cs_deactivate(struct spi_slave *slave) +{ + volatile gpio83xx_t *iopd = &((immap_t *)CFG_IMMR)->gpio[0]; + iopd->dat |= SPI_CS_MASK; +} #endif /* CONFIG_HARD_SPI */ #if defined(CONFIG_OF_BOARD_SETUP) diff --git a/board/gth2/gth2.c b/board/gth2/gth2.c index 6da80dc..9bc4d3f 100644 --- a/board/gth2/gth2.c +++ b/board/gth2/gth2.c @@ -135,7 +135,7 @@ int checkboard (void) *sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */ - proc_id = read_32bit_cp0_register(CP0_PRID); + proc_id = read_c0_prid(); switch (proc_id >> 24) { case 0: diff --git a/board/pb1x00/pb1x00.c b/board/pb1x00/pb1x00.c index 536c954..82b7235 100644 --- a/board/pb1x00/pb1x00.c +++ b/board/pb1x00/pb1x00.c @@ -51,7 +51,7 @@ int checkboard (void) *sys_counter = 0x100; /* Enable 32 kHz oscillator for RTC/TOY */ - proc_id = read_32bit_cp0_register(CP0_PRID); + proc_id = read_c0_prid(); switch (proc_id >> 24) { case 0: diff --git a/board/qemu-mips/qemu-mips.c b/board/qemu-mips/qemu-mips.c index 6869074..6e6eab2 100644 --- a/board/qemu-mips/qemu-mips.c +++ b/board/qemu-mips/qemu-mips.c @@ -38,7 +38,7 @@ int checkboard(void) u32 proc_id; u32 config1; - proc_id = read_32bit_cp0_register(CP0_PRID); + proc_id = read_c0_prid(); printf("Board: Qemu -M mips CPU: "); switch (proc_id) { case 0x00018000: @@ -51,7 +51,7 @@ int checkboard(void) printf("4KEc"); break; case 0x00019300: - config1 = read_mips32_cp0_config1(); + config1 = read_c0_config1(); if (config1 & 1) printf("24Kf"); else @@ -64,7 +64,7 @@ int checkboard(void) printf("R4000"); break; case 0x00018100: - config1 = read_mips32_cp0_config1(); + config1 = read_c0_config1(); if (config1 & 1) printf("5Kf"); else diff --git a/board/quad100hd/Makefile b/board/quad100hd/Makefile new file mode 100644 index 0000000..252ad5a --- /dev/null +++ b/board/quad100hd/Makefile @@ -0,0 +1,51 @@ +# +# (C) Copyright 2007 +# Stefan Roese, DENX Software Engineering, sr@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS = $(BOARD).o nand.o +SOBJS = + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(OBJS) $(SOBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/quad100hd/config.mk b/board/quad100hd/config.mk new file mode 100644 index 0000000..1bdf5e4 --- /dev/null +++ b/board/quad100hd/config.mk @@ -0,0 +1,24 @@ +# +# (C) Copyright 2000 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +TEXT_BASE = 0xFFFC0000 diff --git a/board/quad100hd/nand.c b/board/quad100hd/nand.c new file mode 100644 index 0000000..a36b89d --- /dev/null +++ b/board/quad100hd/nand.c @@ -0,0 +1,79 @@ +/* + * (C) Copyright 2008 + * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <config.h> +#if defined(CONFIG_CMD_NAND) +#include <asm/gpio.h> +#include <nand.h> + +/* + * hardware specific access to control-lines + */ +static void quad100hd_hwcontrol(struct mtd_info *mtd, int cmd) +{ + switch(cmd) { + case NAND_CTL_SETCLE: + gpio_write_bit(CFG_NAND_CLE, 1); + break; + case NAND_CTL_CLRCLE: + gpio_write_bit(CFG_NAND_CLE, 0); + break; + + case NAND_CTL_SETALE: + gpio_write_bit(CFG_NAND_ALE, 1); + break; + case NAND_CTL_CLRALE: + gpio_write_bit(CFG_NAND_ALE, 0); + break; + + case NAND_CTL_SETNCE: + gpio_write_bit(CFG_NAND_CE, 0); + break; + case NAND_CTL_CLRNCE: + gpio_write_bit(CFG_NAND_CE, 1); + break; + } +} + +static int quad100hd_nand_ready(struct mtd_info *mtd) +{ + return gpio_read_in_bit(CFG_NAND_RDY); +} + +/* + * Main initialization routine + */ +int board_nand_init(struct nand_chip *nand) +{ + /* Set address of hardware control function */ + nand->hwcontrol = quad100hd_hwcontrol; + nand->dev_ready = quad100hd_nand_ready; + nand->eccmode = NAND_ECC_SOFT; + /* 15 us command delay time */ + nand->chip_delay = 20; + + /* Return happy */ + return 0; +} +#endif /* CONFIG_CMD_NAND */ diff --git a/board/quad100hd/quad100hd.c b/board/quad100hd/quad100hd.c new file mode 100644 index 0000000..638bd6c --- /dev/null +++ b/board/quad100hd/quad100hd.c @@ -0,0 +1,93 @@ +/* + * (C) Copyright 2008 + * Gary Jennejohn, DENX Software Engineering GmbH, garyj@denx.de. + * + * Based in part on board/icecube/icecube.c from PPCBoot + * (C) Copyright 2003 Intrinsyc Software + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <malloc.h> +#include <environment.h> +#include <logbuff.h> +#include <post.h> + +#include <asm/processor.h> +#include <asm/io.h> +#include <asm/gpio.h> + +DECLARE_GLOBAL_DATA_PTR; + +int board_early_init_f(void) +{ + /* taken from PPCBoot */ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uicer, 0x00000000); /* disable all ints */ + mtdcr(uiccr, 0x00000000); + mtdcr(uicpr, 0xFFFF7FFE); /* set int polarities */ + mtdcr(uictr, 0x00000000); /* set int trigger levels */ + mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ + mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */ + + mtdcr(CPC0_SRR, 0x00040000); /* Hold PCI bridge in reset */ + + return 0; +} + +/* + * Check Board Identity: + */ +int checkboard(void) +{ + char *s = getenv("serial#"); +#ifdef DISPLAY_BOARD_INFO + sys_info_t sysinfo; +#endif + + puts("Board: Quad100hd"); + + if (s != NULL) { + puts(", serial# "); + puts(s); + } + putc('\n'); + +#ifdef DISPLAY_BOARD_INFO + /* taken from ppcboot */ + get_sys_info(&sysinfo); + + printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz); + printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000); + printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000); + printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000); + printf("\tEPB: %lu MHz\n", sysinfo.freqPLB / (sysinfo.pllExtBusDiv * + 1000000)); + printf("\tPCI: %lu MHz\n", sysinfo.freqPCI / 1000000); +#endif + + return 0; +} + +long int initdram(int board_type) +{ + return CFG_SDRAM_SIZE; +} diff --git a/board/quad100hd/u-boot.lds b/board/quad100hd/u-boot.lds new file mode 100644 index 0000000..195d91b --- /dev/null +++ b/board/quad100hd/u-boot.lds @@ -0,0 +1,133 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_ARCH(powerpc) +SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib); +/* Do we need any of these for elf? + __DYNAMIC = 0; */ +SECTIONS +{ + .resetvec 0xFFFFFFFC : + { + *(.resetvec) + } = 0xffff + + /* Read-only sections, merged into text segment: */ + . = + SIZEOF_HEADERS; + .interp : { *(.interp) } + .hash : { *(.hash) } + .dynsym : { *(.dynsym) } + .dynstr : { *(.dynstr) } + .rel.text : { *(.rel.text) } + .rela.text : { *(.rela.text) } + .rel.data : { *(.rel.data) } + .rela.data : { *(.rela.data) } + .rel.rodata : { *(.rel.rodata) } + .rela.rodata : { *(.rela.rodata) } + .rel.got : { *(.rel.got) } + .rela.got : { *(.rela.got) } + .rel.ctors : { *(.rel.ctors) } + .rela.ctors : { *(.rela.ctors) } + .rel.dtors : { *(.rel.dtors) } + .rela.dtors : { *(.rela.dtors) } + .rel.bss : { *(.rel.bss) } + .rela.bss : { *(.rela.bss) } + .rel.plt : { *(.rel.plt) } + .rela.plt : { *(.rela.plt) } + .init : { *(.init) } + .plt : { *(.plt) } + .text : + { + cpu/ppc4xx/start.o (.text) + + *(.text) + *(.fixup) + *(.got1) + } + _etext = .; + PROVIDE (etext = .); + .rodata : + { + *(.rodata) + *(.rodata1) + *(.rodata.str1.4) + } + .fini : { *(.fini) } =0 + .ctors : { *(.ctors) } + .dtors : { *(.dtors) } + + /* Read-write section, merged into data segment: */ + . = (. + 0x00FF) & 0xFFFFFF00; + _erotext = .; + PROVIDE (erotext = .); + .reloc : + { + *(.got) + _GOT2_TABLE_ = .; + *(.got2) + _FIXUP_TABLE_ = .; + *(.fixup) + } + __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; + __fixup_entries = (. - _FIXUP_TABLE_)>>2; + + .data : + { + *(.data) + *(.data1) + *(.sdata) + *(.sdata2) + *(.dynamic) + CONSTRUCTORS + } + _edata = .; + PROVIDE (edata = .); + + . = .; + __u_boot_cmd_start = .; + .u_boot_cmd : { *(.u_boot_cmd) } + __u_boot_cmd_end = .; + + . = .; + __start___ex_table = .; + __ex_table : { *(__ex_table) } + __stop___ex_table = .; + + . = ALIGN(256); + __init_begin = .; + .text.init : { *(.text.init) } + .data.init : { *(.data.init) } + . = ALIGN(256); + __init_end = .; + + __bss_start = .; + .bss (NOLOAD) : + { + *(.sbss) *(.scommon) + *(.dynbss) + *(.bss) + *(COMMON) + } + _end = . ; + PROVIDE (end = .); +} diff --git a/board/sacsng/sacsng.c b/board/sacsng/sacsng.c index 25209e0..e85a0fc 100644 --- a/board/sacsng/sacsng.c +++ b/board/sacsng/sacsng.c @@ -842,37 +842,30 @@ void show_boot_progress (int status) #define SPI_ADC_CS_MASK 0x00000800 #define SPI_DAC_CS_MASK 0x00001000 -void spi_adc_chipsel(int cs) +static const u32 cs_mask[] = { + SPI_ADC_CS_MASK, + SPI_DAC_CS_MASK, +}; + +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs < sizeof(cs_mask) / sizeof(cs_mask[0]); +} + +void spi_cs_activate(struct spi_slave *slave) { volatile ioport_t *iopd = ioport_addr((immap_t *)CFG_IMMR, 3 /* port D */); - if(cs) - iopd->pdat &= ~SPI_ADC_CS_MASK; /* activate the chip select */ - else - iopd->pdat |= SPI_ADC_CS_MASK; /* deactivate the chip select */ + iopd->pdat &= ~cs_mask[slave->cs]; } -void spi_dac_chipsel(int cs) +void spi_cs_deactivate(struct spi_slave *slave) { volatile ioport_t *iopd = ioport_addr((immap_t *)CFG_IMMR, 3 /* port D */); - if(cs) - iopd->pdat &= ~SPI_DAC_CS_MASK; /* activate the chip select */ - else - iopd->pdat |= SPI_DAC_CS_MASK; /* deactivate the chip select */ + iopd->pdat |= cs_mask[slave->cs]; } -/* - * The SPI command uses this table of functions for controlling the SPI - * chip selects: it calls the appropriate function to control the SPI - * chip selects. - */ -spi_chipsel_type spi_chipsel[] = { - spi_adc_chipsel, - spi_dac_chipsel -}; -int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]); - #endif #endif /* CONFIG_MISC_INIT_R */ diff --git a/board/socrates/socrates.c b/board/socrates/socrates.c index cb58994..15c6478 100644 --- a/board/socrates/socrates.c +++ b/board/socrates/socrates.c @@ -45,6 +45,9 @@ ulong flash_get_size (ulong base, int banknum); int checkboard (void) { + volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR); + char *src; + int f; char *s = getenv("serial#"); puts("Board: Socrates"); @@ -55,8 +58,14 @@ int checkboard (void) putc('\n'); #ifdef CONFIG_PCI - printf ("PCI1: 32 bit, %d MHz (compiled)\n", - CONFIG_SYS_CLK_FREQ / 1000000); + if (gur->porpllsr & (1<<15)) { + src = "SYSCLK"; + f = CONFIG_SYS_CLK_FREQ; + } else { + src = "PCI_CLK"; + f = CONFIG_PCI_CLK_FREQ; + } + printf ("PCI1: 32 bit, %d MHz (%s)\n", f/1000000, src); #else printf ("PCI1: disabled\n"); #endif diff --git a/board/ssv/adnpesc1/adnpesc1.c b/board/ssv/adnpesc1/adnpesc1.c index 2ec3a72..3ee8ba5 100644 --- a/board/ssv/adnpesc1/adnpesc1.c +++ b/board/ssv/adnpesc1/adnpesc1.c @@ -69,25 +69,24 @@ long int initdram (int board_type) #define SPI_RTC_CS_MASK 0x00000001 -void spi_rtc_chipsel(int cs) +int spi_cs_is_valid(unsigned int bus, unsigned int cs) +{ + return bus == 0 && cs == 0; +} + +void spi_cs_activate(struct spi_slave *slave) { nios_spi_t *spi = (nios_spi_t *)CFG_NIOS_SPIBASE; - if (cs) - spi->slaveselect = SPI_RTC_CS_MASK; /* activate (1) */ - else - spi->slaveselect = 0; /* deactivate (0) */ + spi->slaveselect = SPI_RTC_CS_MASK; /* activate (1) */ } -/* - * The SPI command uses this table of functions for controlling the SPI - * chip selects: it calls the appropriate function to control the SPI - * chip selects. - */ -spi_chipsel_type spi_chipsel[] = { - spi_rtc_chipsel -}; -int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]); +void spi_cs_deactivate(struct spi_slave *slave) +{ + nios_spi_t *spi = (nios_spi_t *)CFG_NIOS_SPIBASE; + + spi->slaveselect = 0; /* deactivate (0) */ +} #endif |