diff options
Diffstat (limited to 'board')
| -rw-r--r-- | board/freescale/mpc5121ads/mpc5121ads.c | 177 |
1 files changed, 92 insertions, 85 deletions
diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c index 4ff03ca..102e6ff 100644 --- a/board/freescale/mpc5121ads/mpc5121ads.c +++ b/board/freescale/mpc5121ads/mpc5121ads.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2007 DENX Software Engineering + * (C) Copyright 2007-2009 DENX Software Engineering * * See file CREDITS for list of people who contributed to this * project. @@ -22,9 +22,9 @@ */ #include <common.h> -#include <mpc512x.h> #include <asm/bitops.h> #include <command.h> +#include <asm/io.h> #include <asm/processor.h> #include <fdt_support.h> #ifdef CONFIG_MISC_INIT_R @@ -34,6 +34,7 @@ DECLARE_GLOBAL_DATA_PTR; extern int mpc5121_diu_init(void); +extern void ide_set_reset(int idereset); /* Clocks in use */ #define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ @@ -59,22 +60,24 @@ long int fixed_sdram(void); int board_early_init_f (void) { volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - u32 lpcaw; + u32 lpcaw, spridr; /* * Initialize Local Window for the CPLD registers access (CS2 selects * the CPLD chip) */ - im->sysconf.lpcs2aw = CSAW_START(CONFIG_SYS_CPLD_BASE) | - CSAW_STOP(CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_SIZE); - im->lpc.cs_cfg[2] = CONFIG_SYS_CS2_CFG; + out_be32(&im->sysconf.lpcs2aw, + CSAW_START(CONFIG_SYS_CPLD_BASE) | + CSAW_STOP(CONFIG_SYS_CPLD_BASE, CONFIG_SYS_CPLD_SIZE) + ); + out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG); /* * According to MPC5121e RM, configuring local access windows should * be followed by a dummy read of the config register that was * modified last and an isync */ - lpcaw = im->sysconf.lpcs2aw; + lpcaw = in_be32(&im->sysconf.lpcs6aw); __asm__ __volatile__ ("isync"); /* @@ -85,29 +88,32 @@ int board_early_init_f (void) */ #ifdef CONFIG_ADS5121_REV2 - *((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0xC1; + out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0xC1); #else - if (*((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) & 0x04) { - *((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0xC1; + if (in_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) & 0x04) { + out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0xC1); } else { /* running from Backup flash */ - *((volatile u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) = 0x32; + out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0x32); } #endif /* * Configure Flash Speed */ - *((volatile u32 *)(CONFIG_SYS_IMMR + LPC_OFFSET + CS0_CONFIG)) = CONFIG_SYS_CS0_CFG; - if (SVR_MJREV (im->sysconf.spridr) >= 2) { - *((volatile u32 *)(CONFIG_SYS_IMMR + LPC_OFFSET + CS_ALE_TIMING_CONFIG)) = CONFIG_SYS_CS_ALETIMING; - } + out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG); + + spridr = in_be32(&im->sysconf.spridr); + + if (SVR_MJREV (spridr) >= 2) + out_be32 (&im->lpc.altr, CONFIG_SYS_CS_ALETIMING); + /* * Enable clocks */ - im->clk.sccr[0] = SCCR1_CLOCKS_EN; - im->clk.sccr[1] = SCCR2_CLOCKS_EN; + out_be32 (&im->clk.sccr[0], SCCR1_CLOCKS_EN); + out_be32 (&im->clk.sccr[1], SCCR2_CLOCKS_EN); #if defined(CONFIG_IIM) || defined(CONFIG_CMD_FUSE) - im->clk.sccr[1] |= CLOCK_SCCR2_IIM_EN; + setbits_be32 (&im->clk.sccr[1], CLOCK_SCCR2_IIM_EN); #endif return 0; @@ -134,83 +140,83 @@ long int fixed_sdram (void) u32 i; /* Initialize IO Control */ - im->io_ctrl.io_control_mem = IOCTRL_MUX_DDR; + out_be32 (&im->io_ctrl.io_control_mem, IOCTRL_MUX_DDR); /* Initialize DDR Local Window */ - im->sysconf.ddrlaw.bar = CONFIG_SYS_DDR_BASE & 0xFFFFF000; - im->sysconf.ddrlaw.ar = msize_log2 - 1; + out_be32 (&im->sysconf.ddrlaw.bar, CONFIG_SYS_DDR_BASE & 0xFFFFF000); + out_be32 (&im->sysconf.ddrlaw.ar, msize_log2 - 1); /* * According to MPC5121e RM, configuring local access windows should * be followed by a dummy read of the config register that was * modified last and an isync */ - i = im->sysconf.ddrlaw.ar; + in_be32(&im->sysconf.ddrlaw.ar); __asm__ __volatile__ ("isync"); /* Enable DDR */ - im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG_EN; + out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_EN); /* Initialize DDR Priority Manager */ - im->mddrc.prioman_config1 = CONFIG_SYS_MDDRCGRP_PM_CFG1; - im->mddrc.prioman_config2 = CONFIG_SYS_MDDRCGRP_PM_CFG2; - im->mddrc.hiprio_config = CONFIG_SYS_MDDRCGRP_HIPRIO_CFG; - im->mddrc.lut_table0_main_upper = CONFIG_SYS_MDDRCGRP_LUT0_MU; - im->mddrc.lut_table0_main_lower = CONFIG_SYS_MDDRCGRP_LUT0_ML; - im->mddrc.lut_table1_main_upper = CONFIG_SYS_MDDRCGRP_LUT1_MU; - im->mddrc.lut_table1_main_lower = CONFIG_SYS_MDDRCGRP_LUT1_ML; - im->mddrc.lut_table2_main_upper = CONFIG_SYS_MDDRCGRP_LUT2_MU; - im->mddrc.lut_table2_main_lower = CONFIG_SYS_MDDRCGRP_LUT2_ML; - im->mddrc.lut_table3_main_upper = CONFIG_SYS_MDDRCGRP_LUT3_MU; - im->mddrc.lut_table3_main_lower = CONFIG_SYS_MDDRCGRP_LUT3_ML; - im->mddrc.lut_table4_main_upper = CONFIG_SYS_MDDRCGRP_LUT4_MU; - im->mddrc.lut_table4_main_lower = CONFIG_SYS_MDDRCGRP_LUT4_ML; - im->mddrc.lut_table0_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT0_AU; - im->mddrc.lut_table0_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT0_AL; - im->mddrc.lut_table1_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT1_AU; - im->mddrc.lut_table1_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT1_AL; - im->mddrc.lut_table2_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT2_AU; - im->mddrc.lut_table2_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT2_AL; - im->mddrc.lut_table3_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT3_AU; - im->mddrc.lut_table3_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT3_AL; - im->mddrc.lut_table4_alternate_upper = CONFIG_SYS_MDDRCGRP_LUT4_AU; - im->mddrc.lut_table4_alternate_lower = CONFIG_SYS_MDDRCGRP_LUT4_AL; + out_be32(&im->mddrc.prioman_config1, CONFIG_SYS_MDDRCGRP_PM_CFG1); + out_be32(&im->mddrc.prioman_config2, CONFIG_SYS_MDDRCGRP_PM_CFG2); + out_be32(&im->mddrc.hiprio_config, CONFIG_SYS_MDDRCGRP_HIPRIO_CFG); + out_be32(&im->mddrc.lut_table0_main_upper, CONFIG_SYS_MDDRCGRP_LUT0_MU); + out_be32(&im->mddrc.lut_table0_main_lower, CONFIG_SYS_MDDRCGRP_LUT0_ML); + out_be32(&im->mddrc.lut_table1_main_upper, CONFIG_SYS_MDDRCGRP_LUT1_MU); + out_be32(&im->mddrc.lut_table1_main_lower, CONFIG_SYS_MDDRCGRP_LUT1_ML); + out_be32(&im->mddrc.lut_table2_main_upper, CONFIG_SYS_MDDRCGRP_LUT2_MU); + out_be32(&im->mddrc.lut_table2_main_lower, CONFIG_SYS_MDDRCGRP_LUT2_ML); + out_be32(&im->mddrc.lut_table3_main_upper, CONFIG_SYS_MDDRCGRP_LUT3_MU); + out_be32(&im->mddrc.lut_table3_main_lower, CONFIG_SYS_MDDRCGRP_LUT3_ML); + out_be32(&im->mddrc.lut_table4_main_upper, CONFIG_SYS_MDDRCGRP_LUT4_MU); + out_be32(&im->mddrc.lut_table4_main_lower, CONFIG_SYS_MDDRCGRP_LUT4_ML); + out_be32(&im->mddrc.lut_table0_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT0_AU); + out_be32(&im->mddrc.lut_table0_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT0_AL); + out_be32(&im->mddrc.lut_table1_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT1_AU); + out_be32(&im->mddrc.lut_table1_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT1_AL); + out_be32(&im->mddrc.lut_table2_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT2_AU); + out_be32(&im->mddrc.lut_table2_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT2_AL); + out_be32(&im->mddrc.lut_table3_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT3_AU); + out_be32(&im->mddrc.lut_table3_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT3_AL); + out_be32(&im->mddrc.lut_table4_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT4_AU); + out_be32(&im->mddrc.lut_table4_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT4_AL); /* Initialize MDDRC */ - im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG; - im->mddrc.ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0; - im->mddrc.ddr_time_config1 = CONFIG_SYS_MDDRC_TIME_CFG1; - im->mddrc.ddr_time_config2 = CONFIG_SYS_MDDRC_TIME_CFG2; + out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG); + out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0); + out_be32(&im->mddrc.ddr_time_config1, CONFIG_SYS_MDDRC_TIME_CFG1); + out_be32(&im->mddrc.ddr_time_config2, CONFIG_SYS_MDDRC_TIME_CFG2); /* Initialize DDR */ for (i = 0; i < 10; i++) - im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; - - im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM2; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM2; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_EM3; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_EN_DLL; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_RFSH; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_INIT_DEV_OP; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_OCD_DEFAULT; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_PCHG_ALL; - im->mddrc.ddr_command = CONFIG_SYS_MICRON_NOP; + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); + + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM2); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EM3); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_EN_DLL); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_RFSH); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_INIT_DEV_OP); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_OCD_DEFAULT); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_PCHG_ALL); + out_be32(&im->mddrc.ddr_command, CONFIG_SYS_MICRON_NOP); /* Start MDDRC */ - im->mddrc.ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0_RUN; - im->mddrc.ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG_RUN; + out_be32(&im->mddrc.ddr_time_config0, CONFIG_SYS_MDDRC_TIME_CFG0_RUN); + out_be32(&im->mddrc.ddr_sys_config, CONFIG_SYS_MDDRC_SYS_CFG_RUN); return msize; } @@ -249,49 +255,49 @@ int misc_init_r(void) static iopin_t ioregs_init[] = { /* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */ { - IOCTL_SPDIF_TXCLK, 3, 0, + offsetof(struct ioctrl512x, io_control_spdif_txclk), 3, 0, IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) }, /* Set highest Slew on 9 PATA pins */ { - IOCTL_PATA_CE1, 9, 1, + offsetof(struct ioctrl512x, io_control_pata_ce1), 9, 1, IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) }, /* FUNC1=FEC_COL Sets Next 15 to FEC pads */ { - IOCTL_PSC0_0, 15, 0, + offsetof(struct ioctrl512x, io_control_psc0_0), 15, 0, IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) }, /* FUNC1=SPDIF_TXCLK */ { - IOCTL_LPC_CS1, 1, 0, + offsetof(struct ioctrl512x, io_control_lpc_cs1), 1, 0, IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3) }, /* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */ { - IOCTL_I2C1_SCL, 2, 0, + offsetof(struct ioctrl512x, io_control_i2c1_scl), 2, 0, IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3) }, /* FUNC2=DIU CLK */ { - IOCTL_PSC6_0, 1, 0, + offsetof(struct ioctrl512x, io_control_psc6_0), 1, 0, IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3) }, /* FUNC2=DIU_HSYNC */ { - IOCTL_PSC6_1, 1, 0, + offsetof(struct ioctrl512x, io_control_psc6_1), 1, 0, IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) }, /* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */ { - IOCTL_PSC6_4, 26, 0, + offsetof(struct ioctrl512x, io_control_psc6_4), 26, 0, IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) } @@ -300,7 +306,7 @@ static iopin_t ioregs_init[] = { static iopin_t rev2_silicon_pci_ioregs_init[] = { /* FUNC0=PCI Sets next 54 to PCI pads */ { - IOCTL_PCI_AD31, 54, 0, + offsetof(struct ioctrl512x, io_control_pci_ad31), 54, 0, IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_DS(0) } }; @@ -310,6 +316,7 @@ int checkboard (void) ushort brd_rev = *(vu_short *) (CONFIG_SYS_CPLD_BASE + 0x00); uchar cpld_rev = *(vu_char *) (CONFIG_SYS_CPLD_BASE + 0x02); volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + u32 spridr = in_be32(&im->sysconf.spridr); printf ("Board: ADS5121 rev. 0x%04x (CPLD rev. 0x%02x)\n", brd_rev, cpld_rev); @@ -317,7 +324,7 @@ int checkboard (void) /* initialize function mux & slew rate IO inter alia on IO Pins */ iopin_initialize(ioregs_init, ARRAY_SIZE(ioregs_init)); - if (SVR_MJREV (im->sysconf.spridr) >= 2) + if (SVR_MJREV (spridr) >= 2) iopin_initialize(rev2_silicon_pci_ioregs_init, 1); return 0; |