summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/esd/hub405/Kconfig12
-rw-r--r--board/esd/hub405/MAINTAINERS6
-rw-r--r--board/esd/hub405/Makefile10
-rw-r--r--board/esd/hub405/flash.c85
-rw-r--r--board/esd/hub405/hub405.c208
5 files changed, 0 insertions, 321 deletions
diff --git a/board/esd/hub405/Kconfig b/board/esd/hub405/Kconfig
deleted file mode 100644
index 2b9556a..0000000
--- a/board/esd/hub405/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_HUB405
-
-config SYS_BOARD
- default "hub405"
-
-config SYS_VENDOR
- default "esd"
-
-config SYS_CONFIG_NAME
- default "HUB405"
-
-endif
diff --git a/board/esd/hub405/MAINTAINERS b/board/esd/hub405/MAINTAINERS
deleted file mode 100644
index e84a1d9..0000000
--- a/board/esd/hub405/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-HUB405 BOARD
-M: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
-S: Maintained
-F: board/esd/hub405/
-F: include/configs/HUB405.h
-F: configs/HUB405_defconfig
diff --git a/board/esd/hub405/Makefile b/board/esd/hub405/Makefile
deleted file mode 100644
index 99e18b5..0000000
--- a/board/esd/hub405/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
-obj-y = hub405.o flash.o \
- ../common/misc.o \
- ../common/esd405ep_nand.o \
diff --git a/board/esd/hub405/flash.c b/board/esd/hub405/flash.c
deleted file mode 100644
index 23e8164..0000000
--- a/board/esd/hub405/flash.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/ppc4xx.h>
-#include <asm/processor.h>
-
-/*
- * include common flash code (for esd boards)
- */
-#include "../common/flash.c"
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long * addr, flash_info_t * info);
-static void flash_get_offsets (ulong base, flash_info_t * info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
- unsigned long size_b0;
- int i;
- uint pbcr;
- unsigned long base_b0;
- int size_val = 0;
-
- /* Init: no FLASHes known */
- for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
- flash_info[i].flash_id = FLASH_UNKNOWN;
- }
-
- /* Static FLASH Bank configuration here - FIXME XXX */
-
- size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
- if (flash_info[0].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
- size_b0, size_b0<<20);
- }
-
- /* Setup offsets */
- flash_get_offsets (-size_b0, &flash_info[0]);
-
- /* Re-do sizing to get full correct info */
- mtdcr(EBC0_CFGADDR, PB0CR);
- pbcr = mfdcr(EBC0_CFGDATA);
- mtdcr(EBC0_CFGADDR, PB0CR);
- base_b0 = -size_b0;
- switch (size_b0) {
- case 1 << 20:
- size_val = 0;
- break;
- case 2 << 20:
- size_val = 1;
- break;
- case 4 << 20:
- size_val = 2;
- break;
- case 8 << 20:
- size_val = 3;
- break;
- case 16 << 20:
- size_val = 4;
- break;
- }
- pbcr = (pbcr & 0x0001ffff) | base_b0 | (size_val << 17);
- mtdcr(EBC0_CFGDATA, pbcr);
-
- /* Monitor protection ON by default */
- (void)flash_protect(FLAG_PROTECT_SET,
- -CONFIG_SYS_MONITOR_LEN,
- 0xffffffff,
- &flash_info[0]);
-
- flash_info[0].size = size_b0;
-
- return (size_b0);
-}
diff --git a/board/esd/hub405/hub405.c b/board/esd/hub405/hub405.c
deleted file mode 100644
index 1423744..0000000
--- a/board/esd/hub405/hub405.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * (C) Copyright 2001-2003
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <command.h>
-#include <malloc.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-extern void lxt971_no_sleep(void);
-
-int board_revision(void)
-{
- unsigned long osrl_reg;
- unsigned long isr1l_reg;
- unsigned long tcr_reg;
- unsigned long value;
-
- /*
- * Get version of HUB405 board from GPIO's
- */
-
- /*
- * Setup GPIO pin(s) (IRQ6/GPIO23)
- */
- osrl_reg = in_be32((void *)GPIO0_OSRH);
- isr1l_reg = in_be32((void *)GPIO0_ISR1H);
- tcr_reg = in_be32((void *)GPIO0_TCR);
- out_be32((void *)GPIO0_OSRH, osrl_reg & ~0x00030000); /* output select */
- out_be32((void *)GPIO0_ISR1H, isr1l_reg | 0x00030000); /* input select */
- out_be32((void *)GPIO0_TCR, tcr_reg & ~0x00000100); /* select input */
-
- udelay(1000); /* wait some time before reading input */
- value = in_be32((void *)GPIO0_IR) & 0x00000100; /* get config bits */
-
- /*
- * Restore GPIO settings
- */
- out_be32((void *)GPIO0_OSRH, osrl_reg); /* output select */
- out_be32((void *)GPIO0_ISR1H, isr1l_reg); /* input select */
- out_be32((void *)GPIO0_TCR, tcr_reg); /* enable output driver for outputs */
-
- if (value & 0x00000100) {
- /* Revision 1.1 or 1.2 detected */
- return 1;
- }
-
- /* Revision 1.0 */
- return 0;
-}
-
-
-int board_early_init_f (void)
-{
- /*
- * IRQ 0-15 405GP internally generated; active high; level sensitive
- * IRQ 16 405GP internally generated; active low; level sensitive
- * IRQ 17-24 RESERVED
- * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
- * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive
- * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive
- * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive
- * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive
- * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive
- * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
- */
- mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
- mtdcr(UIC0ER, 0x00000000); /* disable all ints */
- mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/
- mtdcr(UIC0PR, 0xFFFFFF9F); /* set int polarities */
- mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */
- mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority*/
- mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
-
- /*
- * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us
- */
- mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */
-
- return 0;
-}
-
-#define LED_REG (DUART0_BA + 0x20)
-int misc_init_r (void)
-{
- unsigned long val;
- int delay, flashcnt;
- char *str;
- char hw_rev[4];
-
- /*
- * Enable interrupts in exar duart mcr[3]
- */
- out_8((void *)(DUART0_BA + 4), 0x08);
- out_8((void *)(DUART1_BA + 4), 0x08);
- out_8((void *)(DUART2_BA + 4), 0x08);
- out_8((void *)(DUART3_BA + 4), 0x08);
-
- /*
- * Set RS232/RS422 control (RS232 = high on GPIO)
- */
- val = in_be32((void *)GPIO0_OR);
- val &= ~(CONFIG_SYS_UART2_RS232 | CONFIG_SYS_UART3_RS232 |
- CONFIG_SYS_UART4_RS232 | CONFIG_SYS_UART5_RS232);
-
- str = getenv("phys0");
- if (!str || (str && (str[0] == '0')))
- val |= CONFIG_SYS_UART2_RS232;
-
- str = getenv("phys1");
- if (!str || (str && (str[0] == '0')))
- val |= CONFIG_SYS_UART3_RS232;
-
- str = getenv("phys2");
- if (!str || (str && (str[0] == '0')))
- val |= CONFIG_SYS_UART4_RS232;
-
- str = getenv("phys3");
- if (!str || (str && (str[0] == '0')))
- val |= CONFIG_SYS_UART5_RS232;
-
- out_be32((void *)GPIO0_OR, val);
-
- /*
- * check board type and setup AP power
- */
- str = getenv("bd_type"); /* this is only set on non prototype hardware */
- if (str != NULL) {
- if ((strcmp(str, "swch405") == 0) || ((!strcmp(str, "hub405") && (gd->board_type >= 1)))) {
- unsigned char led_reg_default = 0;
- str = getenv("ap_pwr");
- if (!str || (str && (str[0] == '1')))
- led_reg_default = 0x04 | 0x02 ; /* U2_LED | AP_PWR */
-
- /*
- * Flash LEDs
- */
- for (flashcnt = 0; flashcnt < 3; flashcnt++) {
- /* LED_A..D off */
- out_8((void *)LED_REG, led_reg_default);
- for (delay = 0; delay < 100; delay++)
- udelay(1000);
- /* LED_A..D on */
- out_8((void *)LED_REG, led_reg_default | 0xf0);
- for (delay = 0; delay < 50; delay++)
- udelay(1000);
- }
- out_8((void *)LED_REG, led_reg_default);
- }
- }
-
- /*
- * Reset external DUARTs
- */
- out_be32((void *)GPIO0_OR,
- in_be32((void *)GPIO0_OR) | CONFIG_SYS_DUART_RST); /* set reset to high */
- udelay(10); /* wait 10us */
- out_be32((void *)GPIO0_OR,
- in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_DUART_RST); /* set reset to low */
- udelay(1000); /* wait 1ms */
-
- /*
- * Store hardware revision in environment for further processing
- */
- sprintf(hw_rev, "1.%ld", gd->board_type);
- setenv("hw_rev", hw_rev);
- return (0);
-}
-
-
-/*
- * Check Board Identity:
- */
-int checkboard (void)
-{
- char str[64];
- int i = getenv_f("serial#", str, sizeof(str));
-
- puts ("Board: ");
-
- if (i == -1) {
- puts ("### No HW ID - assuming HUB405");
- } else {
- puts(str);
- }
-
- if (getenv_f("bd_type", str, sizeof(str)) != -1) {
- printf(" (%s", str);
- } else {
- puts(" (Missing bd_type!");
- }
-
- gd->board_type = board_revision();
- printf(", Rev 1.%ld)\n", gd->board_type);
-
- /*
- * Disable sleep mode in LXT971
- */
- lxt971_no_sleep();
-
- return 0;
-}