summaryrefslogtreecommitdiff
path: root/board
diff options
context:
space:
mode:
Diffstat (limited to 'board')
-rw-r--r--board/cloudengines/pogo_e02/Makefile43
-rw-r--r--board/cloudengines/pogo_e02/kwbimage.cfg169
-rw-r--r--board/cloudengines/pogo_e02/pogo_e02.c118
-rw-r--r--board/cloudengines/pogo_e02/pogo_e02.h44
-rw-r--r--board/cm_t35/cm_t35.c19
-rw-r--r--board/comelit/dig297/dig297.c2
-rw-r--r--board/corscience/tricorder/tricorder.c2
-rw-r--r--board/davinci/ea20/ea20.c4
-rw-r--r--board/denx/m28evk/m28evk.c20
-rw-r--r--board/denx/m28evk/spl_boot.c8
-rw-r--r--board/esg/ima3-mx53/Makefile41
-rw-r--r--board/esg/ima3-mx53/ima3-mx53.c302
-rw-r--r--board/esg/ima3-mx53/imximage.cfg108
-rw-r--r--board/freescale/mx28evk/iomux.c21
-rw-r--r--board/freescale/mx53loco/mx53loco.c146
-rw-r--r--board/freescale/mx6qsabrelite/mx6qsabrelite.c155
-rw-r--r--board/htkw/mcx/mcx.c13
-rw-r--r--board/isee/igep0020/igep0020.c4
-rw-r--r--board/isee/igep0030/igep0030.c4
-rw-r--r--board/logicpd/am3517evm/am3517evm.c2
-rw-r--r--board/logicpd/omap3som/omap3logic.c13
-rw-r--r--board/logicpd/zoom1/zoom1.c2
-rw-r--r--board/logicpd/zoom2/zoom2.c2
-rw-r--r--board/matrix_vision/mvblx/mvblx.c4
-rw-r--r--board/nvidia/common/Makefile1
-rw-r--r--board/nvidia/common/board.c42
-rw-r--r--board/nvidia/common/emc.c53
-rw-r--r--board/nvidia/common/emc.h29
-rw-r--r--board/nvidia/dts/tegra2-seaboard.dts64
-rw-r--r--board/overo/overo.c2
-rw-r--r--board/pandora/pandora.c59
-rw-r--r--board/pandora/pandora.h6
-rw-r--r--board/raidsonic/ib62x0/Makefile43
-rw-r--r--board/raidsonic/ib62x0/ib62x0.c79
-rw-r--r--board/raidsonic/ib62x0/ib62x0.h40
-rw-r--r--board/raidsonic/ib62x0/kwbimage.cfg169
-rw-r--r--board/samsung/smdk5250/tzpc_init.c4
-rw-r--r--board/samsung/trats/trats.c173
-rw-r--r--board/samsung/universal_c210/universal.c25
-rw-r--r--board/technexion/twister/twister.c2
-rw-r--r--board/teejet/mt_ventoux/mt_ventoux.c9
-rw-r--r--board/ti/am3517crane/am3517crane.c2
-rw-r--r--board/ti/beagle/beagle.c2
-rw-r--r--board/ti/evm/evm.c2
-rw-r--r--board/ti/omap5912osk/omap5912osk.c7
-rw-r--r--board/ti/omap5_evm/evm.c10
-rw-r--r--board/ti/omap5_evm/mux_data.h489
-rw-r--r--board/ti/omap730p2/omap730p2.c6
-rw-r--r--board/ti/panda/panda.c2
-rw-r--r--board/ti/panda/panda_mux_data.h10
-rw-r--r--board/ti/sdp3430/sdp.c2
-rw-r--r--board/ti/sdp4430/sdp.c4
-rw-r--r--board/ti/sdp4430/sdp4430_mux_data.h2
-rw-r--r--board/timll/devkit3250/Makefile44
-rw-r--r--board/timll/devkit3250/devkit3250.c65
-rw-r--r--board/timll/devkit8000/devkit8000.c2
56 files changed, 2326 insertions, 369 deletions
diff --git a/board/cloudengines/pogo_e02/Makefile b/board/cloudengines/pogo_e02/Makefile
new file mode 100644
index 0000000..7f86691
--- /dev/null
+++ b/board/cloudengines/pogo_e02/Makefile
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; If not, see <http://www.gnu.org/licenses/>.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := pogo_e02.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/cloudengines/pogo_e02/kwbimage.cfg b/board/cloudengines/pogo_e02/kwbimage.cfg
new file mode 100644
index 0000000..a02e88d
--- /dev/null
+++ b/board/cloudengines/pogo_e02/kwbimage.cfg
@@ -0,0 +1,169 @@
+#
+# Copyright (C) 2012
+# David Purdy <david.c.purdy@gmail.com>
+#
+# Based on Kirkwood support:
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla <at> marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; If not, see <http://www.gnu.org/licenses/>.
+#
+# Refer docs/README.kwimage for more details about how-to configure
+# and create kirkwood boot image
+#
+
+# Boot Media configurations
+BOOT_FROM nand
+NAND_ECC_MODE default
+NAND_PAGE_SIZE 0x0800
+
+# SOC registers configuration using bootrom header extension
+# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
+
+# Configure RGMII-0 interface pad voltage to 1.8V
+DATA 0xffd100e0 0x1b1b1b9b
+
+#Dram initalization for SINGLE x16 CL=5 @ 400MHz
+DATA 0xffd01400 0x43000c30 # DDR Configuration register
+# bit13-0: 0xc30 (3120 DDR2 clks refresh rate)
+# bit23-14: zero
+# bit24: 1= enable exit self refresh mode on DDR access
+# bit25: 1 required
+# bit29-26: zero
+# bit31-30: 01
+
+DATA 0xffd01404 0x37543000 # DDR Controller Control Low
+# bit 4: 0=addr/cmd in smame cycle
+# bit 5: 0=clk is driven during self refresh, we don't care for APX
+# bit 6: 0=use recommended falling edge of clk for addr/cmd
+# bit14: 0=input buffer always powered up
+# bit18: 1=cpu lock transaction enabled
+# bit23-20: 5=recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
+# bit27-24: 7= CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
+# bit30-28: 3 required
+# bit31: 0=no additional STARTBURST delay
+
+DATA 0xffd01408 0x22125451 # DDR Timing (Low) (active cycles value +1)
+# bit3-0: TRAS lsbs
+# bit7-4: TRCD
+# bit11- 8: TRP
+# bit15-12: TWR
+# bit19-16: TWTR
+# bit20: TRAS msb
+# bit23-21: 0x0
+# bit27-24: TRRD
+# bit31-28: TRTP
+
+DATA 0xffd0140c 0x00000a33 # DDR Timing (High)
+# bit6-0: TRFC
+# bit8-7: TR2R
+# bit10-9: TR2W
+# bit12-11: TW2W
+# bit31-13: zero required
+
+DATA 0xffd01410 0x000000cc # DDR Address Control
+# bit1-0: 00, Cs0width=x8
+# bit3-2: 11, Cs0size=1Gb
+# bit5-4: 00, Cs1width=x8
+# bit7-6: 11, Cs1size=1Gb
+# bit9-8: 00, Cs2width=nonexistent
+# bit11-10: 00, Cs2size =nonexistent
+# bit13-12: 00, Cs3width=nonexistent
+# bit15-14: 00, Cs3size =nonexistent
+# bit16: 0, Cs0AddrSel
+# bit17: 0, Cs1AddrSel
+# bit18: 0, Cs2AddrSel
+# bit19: 0, Cs3AddrSel
+# bit31-20: 0 required
+
+DATA 0xffd01414 0x00000000 # DDR Open Pages Control
+# bit0: 0, OpenPage enabled
+# bit31-1: 0 required
+
+DATA 0xffd01418 0x00000000 # DDR Operation
+# bit3-0: 0x0, DDR cmd
+# bit31-4: 0 required
+
+DATA 0xffd0141c 0x00000c52 # DDR Mode
+# bit2-0: 2, BurstLen=2 required
+# bit3: 0, BurstType=0 required
+# bit6-4: 4, CL=5
+# bit7: 0, TestMode=0 normal
+# bit8: 0, DLL reset=0 normal
+# bit11-9: 6, auto-precharge write recovery ????????????
+# bit12: 0, PD must be zero
+# bit31-13: 0 required
+
+DATA 0xffd01420 0x00000040 # DDR Extended Mode
+# bit0: 0, DDR DLL enabled
+# bit1: 0, DDR drive strenght normal
+# bit2: 0, DDR ODT control lsd (disabled)
+# bit5-3: 000, required
+# bit6: 1, DDR ODT control msb, (disabled)
+# bit9-7: 000, required
+# bit10: 0, differential DQS enabled
+# bit11: 0, required
+# bit12: 0, DDR output buffer enabled
+# bit31-13: 0 required
+
+DATA 0xffd01424 0x0000f17f # DDR Controller Control High
+# bit2-0: 111, required
+# bit3 : 1 , MBUS Burst Chop disabled
+# bit6-4: 111, required
+# bit7 : 0
+# bit8 : 1 , add writepath sample stage, must be 1 for DDR freq >= 300MHz
+# bit9 : 0 , no half clock cycle addition to dataout
+# bit10 : 0 , 1/4 clock cycle skew enabled for addr/ctl signals
+# bit11 : 0 , 1/4 clock cycle skew disabled for write mesh
+# bit15-12: 1111 required
+# bit31-16: 0 required
+
+DATA 0xffd01428 0x00085520 # DDR2 ODT Read Timing (default values)
+DATA 0xffd0147c 0x00008552 # DDR2 ODT Write Timing (default values)
+
+DATA 0xffd01500 0x00000000 # CS[0]n Base address to 0x0
+DATA 0xffd01504 0x0ffffff1 # CS[0]n Size
+# bit0: 1, Window enabled
+# bit1: 0, Write Protect disabled
+# bit3-2: 00, CS0 hit selected
+# bit23-4: ones, required
+# bit31-24: 0x0F, Size (i.e. 256MB)
+
+DATA 0xffd01508 0x10000000 # CS[1]n Base address to 256Mb
+DATA 0xffd0150c 0x00000000 # CS[2]n Size, window disabled
+
+DATA 0xffd01514 0x00000000 # CS[2]n Size, window disabled
+DATA 0xffd0151c 0x00000000 # CS[3]n Size, window disabled
+
+DATA 0xffd01494 0x00030000 # DDR ODT Control (Low)
+# bit3-0: 2, ODT0Rd, MODT[0] asserted during read from DRAM CS1
+# bit7-4: 1, ODT0Rd, MODT[0] asserted during read from DRAM CS0
+# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1
+# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0
+
+DATA 0xffd01498 0x00000000 # DDR ODT Control (High)
+# bit1-0: 00, ODT0 controlled by ODT Control (low) register above
+# bit3-2: 01, ODT1 active NEVER!
+# bit31-4: zero, required
+
+DATA 0xffd0149c 0x0000e803 # CPU ODT Control
+DATA 0xffd01480 0x00000001 # DDR Initialization Control
+#bit0=1, enable DDR init upon this register write
+
+# End of Header extension
+DATA 0x0 0x0
diff --git a/board/cloudengines/pogo_e02/pogo_e02.c b/board/cloudengines/pogo_e02/pogo_e02.c
new file mode 100644
index 0000000..ff3421d
--- /dev/null
+++ b/board/cloudengines/pogo_e02/pogo_e02.c
@@ -0,0 +1,118 @@
+/*
+ * Copyright (C) 2012
+ * David Purdy <david.c.purdy@gmail.com>
+ *
+ * Based on Kirkwood support:
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/arch/mpp.h>
+#include "pogo_e02.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+ /*
+ * default gpio configuration
+ * There are maximum 64 gpios controlled through 2 sets of registers
+ * the below configuration configures mainly initial LED status
+ */
+ kw_config_gpio(POGO_E02_OE_VAL_LOW,
+ POGO_E02_OE_VAL_HIGH,
+ POGO_E02_OE_LOW, POGO_E02_OE_HIGH);
+
+ /* Multi-Purpose Pins Functionality configuration */
+ u32 kwmpp_config[] = {
+ MPP0_NF_IO2,
+ MPP1_NF_IO3,
+ MPP2_NF_IO4,
+ MPP3_NF_IO5,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP6_SYSRST_OUTn,
+ MPP7_GPO,
+ MPP8_UART0_RTS,
+ MPP9_UART0_CTS,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP12_SD_CLK,
+ MPP13_SD_CMD,
+ MPP14_SD_D0,
+ MPP15_SD_D1,
+ MPP16_SD_D2,
+ MPP17_SD_D3,
+ MPP18_NF_IO0,
+ MPP19_NF_IO1,
+ MPP29_TSMP9, /* USB Power Enable */
+ MPP48_GPIO, /* LED green */
+ MPP49_GPIO, /* LED orange */
+ 0
+ };
+ kirkwood_mpp_conf(kwmpp_config);
+ return 0;
+}
+
+int board_init(void)
+{
+ /* Boot parameters address */
+ gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
+
+ return 0;
+}
+
+#ifdef CONFIG_RESET_PHY_R
+/* Configure and initialize PHY */
+void reset_phy(void)
+{
+ u16 reg;
+ u16 devadr;
+ char *name = "egiga0";
+
+ if (miiphy_set_current_dev(name))
+ return;
+
+ /* command to read PHY dev address */
+ if (miiphy_read(name, 0xEE, 0xEE, (u16 *) &devadr)) {
+ printf("Err..(%s) could not read PHY dev address\n", __func__);
+ return;
+ }
+
+ /*
+ * Enable RGMII delay on Tx and Rx for CPU port
+ * Ref: sec 4.7.2 of chip datasheet
+ */
+ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 2);
+ miiphy_read(name, devadr, MV88E1116_MAC_CTRL_REG, &reg);
+ reg |= (MV88E1116_RGMII_RXTM_CTRL | MV88E1116_RGMII_TXTM_CTRL);
+ miiphy_write(name, devadr, MV88E1116_MAC_CTRL_REG, reg);
+ miiphy_write(name, devadr, MV88E1116_PGADR_REG, 0);
+
+ /* reset the phy */
+ miiphy_reset(name, devadr);
+
+ debug("88E1116 Initialized on %s\n", name);
+}
+#endif /* CONFIG_RESET_PHY_R */
diff --git a/board/cloudengines/pogo_e02/pogo_e02.h b/board/cloudengines/pogo_e02/pogo_e02.h
new file mode 100644
index 0000000..40b4bab
--- /dev/null
+++ b/board/cloudengines/pogo_e02/pogo_e02.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2012
+ * David Purdy <david.c.purdy@gmail.com>
+ *
+ * Based on Kirkwood support:
+ * (C) Copyright 2009
+ * Marvell Semiconductor <www.marvell.com>
+ * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __POGO_E02_H
+#define __POGO_E02_H
+
+/* GPIO configuration */
+#define POGO_E02_OE_LOW (~(0))
+#define POGO_E02_OE_HIGH (~(0))
+#define POGO_E02_OE_VAL_LOW (1 << 29)
+#define POGO_E02_OE_VAL_HIGH 0
+
+/* PHY related */
+#define MV88E1116_LED_FCTRL_REG 10
+#define MV88E1116_CPRSP_CR3_REG 21
+#define MV88E1116_MAC_CTRL_REG 21
+#define MV88E1116_PGADR_REG 22
+#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
+#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
+
+#endif /* __POGO_E02_H */
diff --git a/board/cm_t35/cm_t35.c b/board/cm_t35/cm_t35.c
index 7af1f41..89e6b08 100644
--- a/board/cm_t35/cm_t35.c
+++ b/board/cm_t35/cm_t35.c
@@ -100,17 +100,6 @@ int board_init(void)
}
/*
- * Routine: misc_init_r
- * Description: display die ID
- */
-int misc_init_r(void)
-{
- dieid_num_r();
-
- return 0;
-}
-
-/*
* Routine: set_muxconf_regs
* Description: Setting up the configuration Mux registers specific to the
* hardware. Many pins need to be moved from protect to primary
@@ -241,6 +230,12 @@ static void cm_t3x_set_common_muxconf(void)
/* I2C1 */
MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0)); /*I2C1_SCL*/
MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0)); /*I2C1_SDA*/
+ /* I2C2 */
+ MUX_VAL(CP(I2C2_SCL), (IEN | PTU | EN | M0)); /*I2C2_SCL*/
+ MUX_VAL(CP(I2C2_SDA), (IEN | PTU | EN | M0)); /*I2C2_SDA*/
+ /* I2C3 */
+ MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0)); /*I2C3_SCL*/
+ MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0)); /*I2C3_SDA*/
/* control and debug */
MUX_VAL(CP(SYS_32K), (IEN | PTD | DIS | M0)); /*SYS_32K*/
@@ -318,7 +313,7 @@ void set_muxconf_regs(void)
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
- return omap_mmc_init(0);
+ return omap_mmc_init(0, 0, 0);
}
#endif
diff --git a/board/comelit/dig297/dig297.c b/board/comelit/dig297/dig297.c
index 6548281..c6c1071 100644
--- a/board/comelit/dig297/dig297.c
+++ b/board/comelit/dig297/dig297.c
@@ -147,7 +147,7 @@ void set_muxconf_regs(void)
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0);
+ omap_mmc_init(0, 0, 0);
return 0;
}
#endif
diff --git a/board/corscience/tricorder/tricorder.c b/board/corscience/tricorder/tricorder.c
index 435711a..aaff2e8 100644
--- a/board/corscience/tricorder/tricorder.c
+++ b/board/corscience/tricorder/tricorder.c
@@ -80,7 +80,7 @@ void set_muxconf_regs(void)
#if defined(CONFIG_GENERIC_MMC) && !(defined(CONFIG_SPL_BUILD))
int board_mmc_init(bd_t *bis)
{
- return omap_mmc_init(0);
+ return omap_mmc_init(0, 0, 0);
}
#endif
diff --git a/board/davinci/ea20/ea20.c b/board/davinci/ea20/ea20.c
index 43632c2..7e00040 100644
--- a/board/davinci/ea20/ea20.c
+++ b/board/davinci/ea20/ea20.c
@@ -272,7 +272,7 @@ int board_init(void)
return 0;
}
-#ifdef BOARD_LATE_INIT
+#ifdef CONFIG_BOARD_LATE_INIT
int board_late_init(void)
{
@@ -287,7 +287,7 @@ int board_late_init(void)
return 0;
}
-#endif /* BOARD_LATE_INIT */
+#endif /* CONFIG_BOARD_LATE_INIT */
#ifdef CONFIG_DRIVER_TI_EMAC
diff --git a/board/denx/m28evk/m28evk.c b/board/denx/m28evk/m28evk.c
index 53df476..3d28ea8 100644
--- a/board/denx/m28evk/m28evk.c
+++ b/board/denx/m28evk/m28evk.c
@@ -90,6 +90,8 @@ int board_mmc_init(bd_t *bis)
{
/* Configure WP as input. */
gpio_direction_input(MX28_PAD_AUART2_CTS__GPIO_3_10);
+ /* Turn on the power to the card. */
+ gpio_direction_output(MX28_PAD_PWM3__GPIO_3_28, 0);
return mxsmmc_initialize(bis, 0, m28_mmc_wp);
}
@@ -103,10 +105,18 @@ int board_mmc_init(bd_t *bis)
int fecmxc_mii_postcall(int phy)
{
+#if defined(CONFIG_DENX_M28_V11) || defined(CONFIG_DENX_M28_V10)
+ /* KZ8031 PHY on old boards. */
+ const uint32_t freq = 0x0080;
+#else
+ /* KZ8021 PHY on new boards. */
+ const uint32_t freq = 0x0000;
+#endif
+
miiphy_write("FEC1", phy, MII_BMCR, 0x9000);
miiphy_write("FEC1", phy, MII_OPMODE_STRAP_OVERRIDE, 0x0202);
if (phy == 3)
- miiphy_write("FEC1", 3, MII_PHY_CTRL2, 0x8180);
+ miiphy_write("FEC1", 3, MII_PHY_CTRL2, 0x8100 | freq);
return 0;
}
@@ -123,6 +133,14 @@ int board_eth_init(bd_t *bis)
CLKCTRL_ENET_TIME_SEL_MASK | CLKCTRL_ENET_CLK_OUT_EN,
CLKCTRL_ENET_TIME_SEL_RMII_CLK);
+#if !defined(CONFIG_DENX_M28_V11) && !defined(CONFIG_DENX_M28_V10)
+ /* Reset the new PHY */
+ gpio_direction_output(MX28_PAD_AUART2_RTS__GPIO_3_11, 0);
+ udelay(10000);
+ gpio_set_value(MX28_PAD_AUART2_RTS__GPIO_3_11, 1);
+ udelay(10000);
+#endif
+
ret = fecmxc_initialize_multi(bis, 0, 0, MXS_ENET0_BASE);
if (ret) {
printf("FEC MXS: Unable to init FEC0\n");
diff --git a/board/denx/m28evk/spl_boot.c b/board/denx/m28evk/spl_boot.c
index a04fe18..7a12592 100644
--- a/board/denx/m28evk/spl_boot.c
+++ b/board/denx/m28evk/spl_boot.c
@@ -109,8 +109,9 @@ const iomux_cfg_t iomux_setup[] = {
(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
MX28_PAD_SSP0_SCK__SSP0_SCK |
(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),
- MX28_PAD_PWM3__GPIO_3_28 | MUX_CONFIG_SSP0, /* Power .. FIXME */
- MX28_PAD_AUART2_CTS__GPIO_3_10, /* WP ... FIXME */
+ MX28_PAD_PWM3__GPIO_3_28 | MUX_CONFIG_SSP0 |
+ (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL), /* Power */
+ MX28_PAD_AUART2_CTS__GPIO_3_10, /* WP */
/* GPMI NAND */
MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI,
@@ -147,6 +148,9 @@ const iomux_cfg_t iomux_setup[] = {
MX28_PAD_ENET0_RXD3__ENET1_RXD1 | MUX_CONFIG_ENET,
MX28_PAD_ENET0_TXD2__ENET1_TXD0 | MUX_CONFIG_ENET,
MX28_PAD_ENET0_TXD3__ENET1_TXD1 | MUX_CONFIG_ENET,
+#if !defined(CONFIG_DENX_M28_V11) && !defined(CONFIG_DENX_M28_V10)
+ MX28_PAD_AUART2_RTS__GPIO_3_11, /* PHY reset */
+#endif
/* I2C */
MX28_PAD_I2C0_SCL__I2C0_SCL,
diff --git a/board/esg/ima3-mx53/Makefile b/board/esg/ima3-mx53/Makefile
new file mode 100644
index 0000000..f3b13bc
--- /dev/null
+++ b/board/esg/ima3-mx53/Makefile
@@ -0,0 +1,41 @@
+#
+# Copyright (C) 2012, Stefano Babic <sbabic@denx.de>
+#
+# Based on ti/evm/Makefile
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := ima3-mx53.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+
+$(LIB): $(obj).depend $(OBJS)
+ $(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/esg/ima3-mx53/ima3-mx53.c b/board/esg/ima3-mx53/ima3-mx53.c
new file mode 100644
index 0000000..9ecf31d
--- /dev/null
+++ b/board/esg/ima3-mx53/ima3-mx53.c
@@ -0,0 +1,302 @@
+/*
+ * (C) Copyright 2012, Stefano Babic <sbabic@denx.de>
+ *
+ * (C) Copyright 2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc.
+ */
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/mx5x_pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux.h>
+#include <asm/errno.h>
+#include <netdev.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+#include <asm/gpio.h>
+
+/* NOR flash configuration */
+#define IMA3_MX53_CS0GCR1 (CSEN | DSZ(2))
+#define IMA3_MX53_CS0GCR2 0
+#define IMA3_MX53_CS0RCR1 (RCSN(2) | OEN(1) | RWSC(15))
+#define IMA3_MX53_CS0RCR2 0
+#define IMA3_MX53_CS0WCR1 (WBED1 | WCSN(2) | WEN(1) | WWSC(15))
+#define IMA3_MX53_CS0WCR2 0
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void weim_nor_settings(void)
+{
+ struct weim *weim_regs = (struct weim *)WEIM_BASE_ADDR;
+
+ writel(IMA3_MX53_CS0GCR1, &weim_regs->cs0gcr1);
+ writel(IMA3_MX53_CS0GCR2, &weim_regs->cs0gcr2);
+ writel(IMA3_MX53_CS0RCR1, &weim_regs->cs0rcr1);
+ writel(IMA3_MX53_CS0RCR2, &weim_regs->cs0rcr2);
+ writel(IMA3_MX53_CS0WCR1, &weim_regs->cs0wcr1);
+ writel(IMA3_MX53_CS0WCR2, &weim_regs->cs0wcr2);
+ writel(0x0, &weim_regs->wcr);
+
+ set_chipselect_size(CS0_128);
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE,
+ PHYS_SDRAM_1_SIZE);
+ return 0;
+}
+
+static void setup_iomux_uart(void)
+{
+ /* UART4 RXD */
+ mxc_request_iomux(MX53_PIN_CSI0_D13, IOMUX_CONFIG_ALT2);
+ mxc_iomux_set_pad(MX53_PIN_CSI0_D13,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
+ PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE |
+ PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE);
+ mxc_iomux_set_input(MX53_UART4_IPP_UART_RXD_MUX_SELECT_INPUT, 0x3);
+
+ /* UART4 TXD */
+ mxc_request_iomux(MX53_PIN_CSI0_D12, IOMUX_CONFIG_ALT2);
+ mxc_iomux_set_pad(MX53_PIN_CSI0_D12,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
+ PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE |
+ PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE);
+}
+
+static void setup_iomux_fec(void)
+{
+ /*FEC_MDIO*/
+ mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_FEC_MDIO,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
+ PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | PAD_CTL_22K_PU |
+ PAD_CTL_ODE_OPENDRAIN_ENABLE);
+ mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1);
+
+ /*FEC_MDC*/
+ mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH);
+
+ /* FEC RXD3 */
+ mxc_request_iomux(MX53_PIN_KEY_COL0, IOMUX_CONFIG_ALT6);
+ mxc_iomux_set_pad(MX53_PIN_KEY_COL0, PAD_CTL_HYS_ENABLE |
+ PAD_CTL_PKE_ENABLE);
+
+ /* FEC RXD2 */
+ mxc_request_iomux(MX53_PIN_KEY_COL2, IOMUX_CONFIG_ALT6);
+ mxc_iomux_set_pad(MX53_PIN_KEY_COL2, PAD_CTL_HYS_ENABLE |
+ PAD_CTL_PKE_ENABLE);
+
+ /* FEC RXD1 */
+ mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_FEC_RXD1, PAD_CTL_HYS_ENABLE |
+ PAD_CTL_PKE_ENABLE);
+
+ /* FEC RXD0 */
+ mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_FEC_RXD0, PAD_CTL_HYS_ENABLE |
+ PAD_CTL_PKE_ENABLE);
+
+ /* FEC TXD3 */
+ mxc_request_iomux(MX53_PIN_GPIO_19, IOMUX_CONFIG_ALT6);
+ mxc_iomux_set_pad(MX53_PIN_GPIO_19, PAD_CTL_DRV_HIGH);
+
+ /* FEC TXD2 */
+ mxc_request_iomux(MX53_PIN_KEY_ROW2, IOMUX_CONFIG_ALT6);
+ mxc_iomux_set_pad(MX53_PIN_KEY_ROW2, PAD_CTL_DRV_HIGH);
+
+ /* FEC TXD1 */
+ mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH);
+
+ /* FEC TXD0 */
+ mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH);
+
+ /* FEC TX_EN */
+ mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH);
+
+ /* FEC TX_CLK */
+ mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK, PAD_CTL_HYS_ENABLE |
+ PAD_CTL_PKE_ENABLE);
+
+ /* FEC RX_ER */
+ mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER, PAD_CTL_HYS_ENABLE |
+ PAD_CTL_PKE_ENABLE);
+
+ /* FEC RX_DV */
+ mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0);
+ mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV, PAD_CTL_HYS_ENABLE |
+ PAD_CTL_PKE_ENABLE);
+
+ /* FEC CRS */
+ mxc_request_iomux(MX53_PIN_KEY_COL3, IOMUX_CONFIG_ALT6);
+ mxc_iomux_set_pad(MX53_PIN_KEY_COL3, PAD_CTL_HYS_ENABLE |
+ PAD_CTL_PKE_ENABLE);
+
+ /* FEC COL */
+ mxc_request_iomux(MX53_PIN_KEY_ROW1, IOMUX_CONFIG_ALT6);
+ mxc_iomux_set_pad(MX53_PIN_KEY_ROW1, PAD_CTL_HYS_ENABLE |
+ PAD_CTL_PKE_ENABLE);
+ mxc_iomux_set_input(MX53_FEC_FEC_COL_SELECT_INPUT, 0x0);
+
+ /* FEC RX_CLK */
+ mxc_request_iomux(MX53_PIN_KEY_COL1, IOMUX_CONFIG_ALT6);
+ mxc_iomux_set_pad(MX53_PIN_KEY_COL1, PAD_CTL_HYS_ENABLE |
+ PAD_CTL_PKE_ENABLE);
+ mxc_iomux_set_input(MX53_FEC_FEC_RX_CLK_SELECT_INPUT, 0x0);
+}
+
+#ifdef CONFIG_FSL_ESDHC
+struct fsl_esdhc_cfg esdhc_cfg = { MMC_SDHC1_BASE_ADDR, 1 };
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+ int ret;
+
+ ret = !gpio_get_value(IOMUX_TO_GPIO(MX53_PIN_GPIO_1));
+
+ return ret;
+}
+
+int board_mmc_init(bd_t *bis)
+{
+ mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_SD1_DATA0, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_SD1_DATA1, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_SD1_DATA2, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_SD1_DATA3, IOMUX_CONFIG_ALT0);
+ mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1);
+ mxc_iomux_set_pad(MX53_PIN_GPIO_1,
+ PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE |
+ PAD_CTL_PUE_KEEPER | PAD_CTL_100K_PU |
+ PAD_CTL_ODE_OPENDRAIN_NONE | PAD_CTL_PKE_ENABLE);
+ gpio_direction_input(IOMUX_TO_GPIO(MX53_PIN_GPIO_1));
+
+ mxc_iomux_set_pad(MX53_PIN_SD1_CMD,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU);
+ mxc_iomux_set_pad(MX53_PIN_SD1_CLK,
+ PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE |
+ PAD_CTL_47K_PU | PAD_CTL_DRV_HIGH);
+ mxc_iomux_set_pad(MX53_PIN_SD1_DATA0,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
+ mxc_iomux_set_pad(MX53_PIN_SD1_DATA1,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
+ mxc_iomux_set_pad(MX53_PIN_SD1_DATA2,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
+ mxc_iomux_set_pad(MX53_PIN_SD1_DATA3,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
+
+ return fsl_esdhc_initialize(bis, &esdhc_cfg);
+}
+#endif
+
+static void setup_iomux_spi(void)
+{
+ /* SCLK */
+ mxc_request_iomux(MX53_PIN_CSI0_D8, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX53_PIN_CSI0_D8,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
+ mxc_iomux_set_input(MX53_ECSPI2_IPP_CSPI_CLK_IN_SELECT_INPUT, 0x1);
+ /* MOSI */
+ mxc_request_iomux(MX53_PIN_CSI0_D9, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX53_PIN_CSI0_D9,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
+ mxc_iomux_set_input(MX53_ECSPI2_IPP_IND_MOSI_SELECT_INPUT, 0x1);
+ /* MISO */
+ mxc_request_iomux(MX53_PIN_CSI0_D10, IOMUX_CONFIG_ALT3);
+ mxc_iomux_set_pad(MX53_PIN_CSI0_D10,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
+ mxc_iomux_set_input(MX53_ECSPI2_IPP_IND_MISO_SELECT_INPUT, 0x1);
+ /* SSEL 0 */
+ mxc_request_iomux(MX53_PIN_CSI0_D11, IOMUX_CONFIG_GPIO);
+ mxc_iomux_set_pad(MX53_PIN_CSI0_D11,
+ PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
+ PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
+ gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_CSI0_D11), 1);
+}
+
+int board_early_init_f(void)
+{
+ /* configure I/O pads */
+ setup_iomux_uart();
+ setup_iomux_fec();
+
+ weim_nor_settings();
+
+ /* configure spi */
+ setup_iomux_spi();
+
+ return 0;
+}
+
+int board_init(void)
+{
+ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+
+ mxc_set_sata_internal_clock();
+
+ return 0;
+}
+
+#if defined(CONFIG_RESET_PHY_R)
+#include <miiphy.h>
+
+void reset_phy(void)
+{
+ unsigned short reg;
+
+ /* reset the phy */
+ miiphy_reset("FEC", CONFIG_PHY_ADDR);
+
+ /* set hard link to 100Mbit, full-duplex */
+ miiphy_read("FEC", CONFIG_PHY_ADDR, MII_BMCR, &reg);
+ reg &= ~BMCR_ANENABLE;
+ reg |= (BMCR_SPEED100 | BMCR_FULLDPLX);
+ miiphy_write("FEC", CONFIG_PHY_ADDR, MII_BMCR, reg);
+
+ miiphy_read("FEC", CONFIG_PHY_ADDR, 0x16, &reg);
+ reg |= (1 << 5);
+ miiphy_write("FEC", CONFIG_PHY_ADDR, 0x16, reg);
+}
+#endif
+
+int checkboard(void)
+{
+ puts("Board: IMA3_MX53\n");
+
+ return 0;
+}
diff --git a/board/esg/ima3-mx53/imximage.cfg b/board/esg/ima3-mx53/imximage.cfg
new file mode 100644
index 0000000..fa6b42d
--- /dev/null
+++ b/board/esg/ima3-mx53/imximage.cfg
@@ -0,0 +1,108 @@
+#
+# (C) Copyright 2012
+# Stefano Babic DENX Software Engineering sbabic@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not write to the Free Software
+# Foundation Inc. 51 Franklin Street Fifth Floor Boston,
+# MA 02110-1301 USA
+#
+# Refer docs/README.imxmage for more details about how-to configure
+# and create imximage boot image
+#
+# The syntax is taken as close as possible with the kwbimage
+
+# image version
+
+IMAGE_VERSION 2
+
+# Boot Device : one of
+# spi, sd (the board has no nand neither onenand)
+
+BOOT_FROM nor
+
+# Device Configuration Data (DCD)
+#
+# Each entry must have the format:
+# Addr-type Address Value
+#
+# where:
+# Addr-type register length (1,2 or 4 bytes)
+# Address absolute address of the register
+# value value to be stored in the register
+
+# IOMUX for RAM only
+DATA 4 0x53fa8554 0x300020
+DATA 4 0x53fa8560 0x300020
+DATA 4 0x53fa8594 0x300020
+DATA 4 0x53fa8584 0x300020
+DATA 4 0x53fa8558 0x300040
+DATA 4 0x53fa8568 0x300040
+DATA 4 0x53fa8590 0x300040
+DATA 4 0x53fa857c 0x300040
+DATA 4 0x53fa8564 0x300040
+DATA 4 0x53fa8580 0x300040
+DATA 4 0x53fa8570 0x300220
+DATA 4 0x53fa8578 0x300220
+DATA 4 0x53fa872c 0x300000
+DATA 4 0x53fa8728 0x300000
+DATA 4 0x53fa871c 0x300000
+DATA 4 0x53fa8718 0x300000
+DATA 4 0x53fa8574 0x300020
+DATA 4 0x53fa8588 0x300020
+DATA 4 0x53fa855c 0x0
+DATA 4 0x53fa858c 0x0
+DATA 4 0x53fa856c 0x300040
+DATA 4 0x53fa86f0 0x300000
+DATA 4 0x53fa8720 0x300000
+DATA 4 0x53fa86fc 0x0
+DATA 4 0x53fa86f4 0x0
+DATA 4 0x53fa8714 0x0
+DATA 4 0x53fa8724 0x4000000
+#
+# DDR RAM
+DATA 4 0x63fd9088 0x40404040
+DATA 4 0x63fd9090 0x40404040
+DATA 4 0x63fd907C 0x01420143
+DATA 4 0x63fd9080 0x01450146
+DATA 4 0x63fd9018 0x00111740
+DATA 4 0x63fd9000 0x84190000
+# esdcfgX
+DATA 4 0x63fd900C 0x9f5152e3
+DATA 4 0x63fd9010 0xb68e8a63
+DATA 4 0x63fd9014 0x01ff00db
+# Read/Write command delay
+DATA 4 0x63fd902c 0x000026d2
+# Out of reset delays
+DATA 4 0x63fd9030 0x00ff0e21
+# ESDCTL ODT timing control
+DATA 4 0x63fd9008 0x12273030
+# ESDCTL power down control
+DATA 4 0x63fd9004 0x0002002d
+# Set registers in DDR memory chips
+DATA 4 0x63fd901c 0x00008032
+DATA 4 0x63fd901c 0x00008033
+DATA 4 0x63fd901c 0x00028031
+DATA 4 0x63fd901c 0x052080b0
+DATA 4 0x63fd901c 0x04008040
+# ESDCTL refresh control
+DATA 4 0x63fd9020 0x00005800
+# PHY ZQ HW control
+DATA 4 0x63fd9040 0x05380003
+# PHY ODT control
+DATA 4 0x63fd9058 0x00022222
+# start DDR3
+DATA 4 0x63fd901c 0x00000000
diff --git a/board/freescale/mx28evk/iomux.c b/board/freescale/mx28evk/iomux.c
index 396761b..6587c45 100644
--- a/board/freescale/mx28evk/iomux.c
+++ b/board/freescale/mx28evk/iomux.c
@@ -26,6 +26,7 @@
#include <asm/arch/sys_proto.h>
#define MUX_CONFIG_SSP0 (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
+#define MUX_CONFIG_GPMI (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_NOPULL)
#define MUX_CONFIG_ENET (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP)
#define MUX_CONFIG_EMI (MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL)
#define MUX_CONFIG_SSP2 (MXS_PAD_3V3 | MXS_PAD_4MA | MXS_PAD_PULLUP)
@@ -55,6 +56,26 @@ const iomux_cfg_t iomux_setup[] = {
MX28_PAD_PWM3__GPIO_3_28 |
(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_PULLUP),
+#ifdef CONFIG_NAND_MXS
+ /* GPMI NAND */
+ MX28_PAD_GPMI_D00__GPMI_D0 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D01__GPMI_D1 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D02__GPMI_D2 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D03__GPMI_D3 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D04__GPMI_D4 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D05__GPMI_D5 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D06__GPMI_D6 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_D07__GPMI_D7 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_CE0N__GPMI_CE0N | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_RDY0__GPMI_READY0 | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_RDN__GPMI_RDN |
+ (MXS_PAD_3V3 | MXS_PAD_8MA | MXS_PAD_PULLUP),
+ MX28_PAD_GPMI_WRN__GPMI_WRN | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_ALE__GPMI_ALE | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_CLE__GPMI_CLE | MUX_CONFIG_GPMI,
+ MX28_PAD_GPMI_RESETN__GPMI_RESETN | MUX_CONFIG_GPMI,
+#endif
+
/* FEC0 */
MX28_PAD_ENET0_MDC__ENET0_MDC | MUX_CONFIG_ENET,
MX28_PAD_ENET0_MDIO__ENET0_MDIO | MUX_CONFIG_ENET,
diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c
index d736141..dec966d 100644
--- a/board/freescale/mx53loco/mx53loco.c
+++ b/board/freescale/mx53loco/mx53loco.c
@@ -27,6 +27,7 @@
#include <asm/arch/mx5x_pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
+#include <asm/arch/clock.h>
#include <asm/arch/iomux.h>
#include <asm/arch/clock.h>
#include <asm/errno.h>
@@ -35,6 +36,9 @@
#include <mmc.h>
#include <fsl_esdhc.h>
#include <asm/gpio.h>
+#include <pmic.h>
+#include <dialog_pmic.h>
+#include <fsl_pmic.h>
DECLARE_GLOBAL_DATA_PTR;
@@ -58,6 +62,18 @@ void dram_init_banksize(void)
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
}
+u32 get_board_rev(void)
+{
+ struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
+ struct fuse_bank *bank = &iim->bank[0];
+ struct fuse_bank0_regs *fuse =
+ (struct fuse_bank0_regs *)bank->fuse_regs;
+
+ int rev = readl(&fuse->gp[6]);
+
+ return (get_cpu_rev() & ~(0xF << 8)) | (rev & 0xF) << 8;
+}
+
static void setup_iomux_uart(void)
{
/* UART1 RXD */
@@ -81,10 +97,9 @@ static void setup_iomux_uart(void)
#ifdef CONFIG_USB_EHCI_MX5
int board_ehci_hcd_init(int port)
{
- /* request VBUS power enable pin, GPIO[8}, gpio7 */
+ /* request VBUS power enable pin, GPIO7_8 */
mxc_request_iomux(MX53_PIN_ATA_DA_2, IOMUX_CONFIG_ALT1);
- gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_2), 0);
- gpio_set_value(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_2), 1);
+ gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_ATA_DA_2), 1);
return 0;
}
#endif
@@ -290,6 +305,103 @@ int board_mmc_init(bd_t *bis)
}
#endif
+static void setup_iomux_i2c(void)
+{
+ /* I2C1 SDA */
+ mxc_request_iomux(MX53_PIN_CSI0_D8,
+ IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION);
+ mxc_iomux_set_input(MX53_I2C1_IPP_SDA_IN_SELECT_INPUT,
+ INPUT_CTL_PATH0);
+ mxc_iomux_set_pad(MX53_PIN_CSI0_D8,
+ PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
+ PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE |
+ PAD_CTL_PUE_PULL |
+ PAD_CTL_ODE_OPENDRAIN_ENABLE);
+ /* I2C1 SCL */
+ mxc_request_iomux(MX53_PIN_CSI0_D9,
+ IOMUX_CONFIG_ALT5 | IOMUX_CONFIG_SION);
+ mxc_iomux_set_input(MX53_I2C1_IPP_SCL_IN_SELECT_INPUT,
+ INPUT_CTL_PATH0);
+ mxc_iomux_set_pad(MX53_PIN_CSI0_D9,
+ PAD_CTL_SRE_FAST | PAD_CTL_DRV_HIGH |
+ PAD_CTL_100K_PU | PAD_CTL_PKE_ENABLE |
+ PAD_CTL_PUE_PULL |
+ PAD_CTL_ODE_OPENDRAIN_ENABLE);
+}
+
+static int power_init(void)
+{
+ unsigned int val;
+ int ret = -1;
+ struct pmic *p;
+
+ if (!i2c_probe(CONFIG_SYS_DIALOG_PMIC_I2C_ADDR)) {
+ pmic_dialog_init();
+ p = get_pmic();
+
+ /* Set VDDA to 1.25V */
+ val = DA9052_BUCKCORE_BCOREEN | DA_BUCKCORE_VBCORE_1_250V;
+ ret = pmic_reg_write(p, DA9053_BUCKCORE_REG, val);
+
+ ret |= pmic_reg_read(p, DA9053_SUPPLY_REG, &val);
+ val |= DA9052_SUPPLY_VBCOREGO;
+ ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, val);
+
+ /* Set Vcc peripheral to 1.30V */
+ ret |= pmic_reg_write(p, DA9053_BUCKPRO_REG, 0x62);
+ ret |= pmic_reg_write(p, DA9053_SUPPLY_REG, 0x62);
+ }
+
+ if (!i2c_probe(CONFIG_SYS_FSL_PMIC_I2C_ADDR)) {
+ pmic_init();
+ p = get_pmic();
+
+ /* Set VDDGP to 1.25V for 1GHz on SW1 */
+ pmic_reg_read(p, REG_SW_0, &val);
+ val = (val & ~SWx_VOLT_MASK_MC34708) | SWx_1_250V_MC34708;
+ ret = pmic_reg_write(p, REG_SW_0, val);
+
+ /* Set VCC as 1.30V on SW2 */
+ pmic_reg_read(p, REG_SW_1, &val);
+ val = (val & ~SWx_VOLT_MASK_MC34708) | SWx_1_300V_MC34708;
+ ret |= pmic_reg_write(p, REG_SW_1, val);
+
+ /* Set global reset timer to 4s */
+ pmic_reg_read(p, REG_POWER_CTL2, &val);
+ val = (val & ~TIMER_MASK_MC34708) | TIMER_4S_MC34708;
+ ret |= pmic_reg_write(p, REG_POWER_CTL2, val);
+
+ /* Set VUSBSEL and VUSBEN for USB PHY supply*/
+ pmic_reg_read(p, REG_MODE_0, &val);
+ val |= (VUSBSEL_MC34708 | VUSBEN_MC34708);
+ ret |= pmic_reg_write(p, REG_MODE_0, val);
+
+ /* Set SWBST to 5V in auto mode */
+ val = SWBST_AUTO;
+ ret |= pmic_reg_write(p, SWBST_CTRL, val);
+ }
+
+ return ret;
+}
+
+static void clock_1GHz(void)
+{
+ int ret;
+ u32 ref_clk = CONFIG_SYS_MX5_HCLK;
+ /*
+ * After increasing voltage to 1.25V, we can switch
+ * CPU clock to 1GHz and DDR to 400MHz safely
+ */
+ ret = mxc_set_clock(ref_clk, 1000, MXC_ARM_CLK);
+ if (ret)
+ printf("CPU: Switch CPU clock to 1GHZ failed\n");
+
+ ret = mxc_set_clock(ref_clk, 400, MXC_PERIPH_CLK);
+ ret |= mxc_set_clock(ref_clk, 400, MXC_DDR_CLK);
+ if (ret)
+ printf("CPU: Switch DDR clock to 400MHz failed\n");
+}
+
int board_early_init_f(void)
{
setup_iomux_uart();
@@ -298,10 +410,38 @@ int board_early_init_f(void)
return 0;
}
+int print_cpuinfo(void)
+{
+ u32 cpurev;
+
+ cpurev = get_cpu_rev();
+ printf("CPU: Freescale i.MX%x family rev%d.%d at %d MHz\n",
+ (cpurev & 0xFF000) >> 12,
+ (cpurev & 0x000F0) >> 4,
+ (cpurev & 0x0000F) >> 0,
+ mxc_get_clock(MXC_ARM_CLK) / 1000000);
+ printf("Reset cause: %s\n", get_reset_cause());
+ return 0;
+}
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+ setup_iomux_i2c();
+ if (!power_init())
+ clock_1GHz();
+ print_cpuinfo();
+
+ return 0;
+}
+#endif
+
int board_init(void)
{
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
+ mxc_set_sata_internal_clock();
+
return 0;
}
diff --git a/board/freescale/mx6qsabrelite/mx6qsabrelite.c b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
index fda3e41..29cbfed 100644
--- a/board/freescale/mx6qsabrelite/mx6qsabrelite.c
+++ b/board/freescale/mx6qsabrelite/mx6qsabrelite.c
@@ -25,6 +25,7 @@
#include <asm/arch/imx-regs.h>
#include <asm/arch/mx6x_pins.h>
#include <asm/arch/iomux-v3.h>
+#include <asm/arch/clock.h>
#include <asm/errno.h>
#include <asm/gpio.h>
#include <mmc.h>
@@ -50,6 +51,10 @@ DECLARE_GLOBAL_DATA_PTR;
PAD_CTL_PUS_100K_DOWN | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
+#define BUTTON_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
+ PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
+ PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
+
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
@@ -122,6 +127,22 @@ iomux_v3_cfg_t enet_pads2[] = {
MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
};
+/* Button assignments for J14 */
+static iomux_v3_cfg_t button_pads[] = {
+ /* Menu */
+ MX6Q_PAD_NANDF_D1__GPIO_2_1 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
+ /* Back */
+ MX6Q_PAD_NANDF_D2__GPIO_2_2 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
+ /* Labelled Search (mapped to Power under Android) */
+ MX6Q_PAD_NANDF_D3__GPIO_2_3 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
+ /* Home */
+ MX6Q_PAD_NANDF_D4__GPIO_2_4 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
+ /* Volume Down */
+ MX6Q_PAD_GPIO_19__GPIO_4_5 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
+ /* Volume Up */
+ MX6Q_PAD_GPIO_18__GPIO_7_13 | MUX_PAD_CTRL(BUTTON_PAD_CTRL),
+};
+
static void setup_iomux_enet(void)
{
gpio_direction_output(87, 0); /* GPIO 3-23 */
@@ -135,7 +156,7 @@ static void setup_iomux_enet(void)
/* Need delay 10ms according to KSZ9021 spec */
udelay(1000 * 10);
- gpio_direction_output(87, 1); /* GPIO 3-23 */
+ gpio_set_value(87, 1); /* GPIO 3-23 */
imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2));
}
@@ -267,11 +288,44 @@ int board_eth_init(bd_t *bis)
return 0;
}
+static void setup_buttons(void)
+{
+ imx_iomux_v3_setup_multiple_pads(button_pads,
+ ARRAY_SIZE(button_pads));
+}
+
+#ifdef CONFIG_CMD_SATA
+
+int setup_sata(void)
+{
+ struct iomuxc_base_regs *const iomuxc_regs
+ = (struct iomuxc_base_regs *) IOMUXC_BASE_ADDR;
+ int ret = enable_sata_clock();
+ if (ret)
+ return ret;
+
+ clrsetbits_le32(&iomuxc_regs->gpr[13],
+ IOMUXC_GPR13_SATA_MASK,
+ IOMUXC_GPR13_SATA_PHY_8_RXEQ_3P0DB
+ |IOMUXC_GPR13_SATA_PHY_7_SATA2M
+ |IOMUXC_GPR13_SATA_SPEED_3G
+ |(3<<IOMUXC_GPR13_SATA_PHY_6_SHIFT)
+ |IOMUXC_GPR13_SATA_SATA_PHY_5_SS_DISABLED
+ |IOMUXC_GPR13_SATA_SATA_PHY_4_ATTEN_9_16
+ |IOMUXC_GPR13_SATA_PHY_3_TXBOOST_0P00_DB
+ |IOMUXC_GPR13_SATA_PHY_2_TX_1P104V
+ |IOMUXC_GPR13_SATA_PHY_1_SLOW);
+
+ return 0;
+}
+#endif
+
int board_early_init_f(void)
{
- setup_iomux_uart();
+ setup_iomux_uart();
+ setup_buttons();
- return 0;
+ return 0;
}
int board_init(void)
@@ -283,6 +337,10 @@ int board_init(void)
setup_spi();
#endif
+#ifdef CONFIG_CMD_SATA
+ setup_sata();
+#endif
+
return 0;
}
@@ -292,3 +350,94 @@ int checkboard(void)
return 0;
}
+
+struct button_key {
+ char const *name;
+ unsigned gpnum;
+ char ident;
+};
+
+static struct button_key const buttons[] = {
+ {"back", GPIO_NUMBER(2, 2), 'B'},
+ {"home", GPIO_NUMBER(2, 4), 'H'},
+ {"menu", GPIO_NUMBER(2, 1), 'M'},
+ {"search", GPIO_NUMBER(2, 3), 'S'},
+ {"volup", GPIO_NUMBER(7, 13), 'V'},
+ {"voldown", GPIO_NUMBER(4, 5), 'v'},
+};
+
+/*
+ * generate a null-terminated string containing the buttons pressed
+ * returns number of keys pressed
+ */
+static int read_keys(char *buf)
+{
+ int i, numpressed = 0;
+ for (i = 0; i < ARRAY_SIZE(buttons); i++) {
+ if (!gpio_get_value(buttons[i].gpnum))
+ buf[numpressed++] = buttons[i].ident;
+ }
+ buf[numpressed] = '\0';
+ return numpressed;
+}
+
+static int do_kbd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ char envvalue[ARRAY_SIZE(buttons)+1];
+ int numpressed = read_keys(envvalue);
+ setenv("keybd", envvalue);
+ return numpressed == 0;
+}
+
+U_BOOT_CMD(
+ kbd, 1, 1, do_kbd,
+ "Tests for keypresses, sets 'keybd' environment variable",
+ "Returns 0 (true) to shell if key is pressed."
+);
+
+#ifdef CONFIG_PREBOOT
+static char const kbd_magic_prefix[] = "key_magic";
+static char const kbd_command_prefix[] = "key_cmd";
+
+static void preboot_keys(void)
+{
+ int numpressed;
+ char keypress[ARRAY_SIZE(buttons)+1];
+ numpressed = read_keys(keypress);
+ if (numpressed) {
+ char *kbd_magic_keys = getenv("magic_keys");
+ char *suffix;
+ /*
+ * loop over all magic keys
+ */
+ for (suffix = kbd_magic_keys; *suffix; ++suffix) {
+ char *keys;
+ char magic[sizeof(kbd_magic_prefix) + 1];
+ sprintf(magic, "%s%c", kbd_magic_prefix, *suffix);
+ keys = getenv(magic);
+ if (keys) {
+ if (!strcmp(keys, keypress))
+ break;
+ }
+ }
+ if (*suffix) {
+ char cmd_name[sizeof(kbd_command_prefix) + 1];
+ char *cmd;
+ sprintf(cmd_name, "%s%c", kbd_command_prefix, *suffix);
+ cmd = getenv(cmd_name);
+ if (cmd) {
+ setenv("preboot", cmd);
+ return;
+ }
+ }
+ }
+}
+#endif
+
+int misc_init_r(void)
+{
+#ifdef CONFIG_PREBOOT
+ preboot_keys();
+#endif
+ return 0;
+}
diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c
index e593b43..8f75af1 100644
--- a/board/htkw/mcx/mcx.c
+++ b/board/htkw/mcx/mcx.c
@@ -69,17 +69,6 @@ int board_init(void)
}
/*
- * Routine: misc_init_r
- * Description: late init.
- */
-int misc_init_r(void)
-{
- dieid_num_r();
-
- return 0;
-}
-
-/*
* Routine: set_muxconf_regs
* Description: Setting up the configuration Mux registers specific to the
* hardware. Many pins need to be moved from protect to primary
@@ -93,7 +82,7 @@ void set_muxconf_regs(void)
#if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- return omap_mmc_init(0);
+ return omap_mmc_init(0, 0, 0);
}
#endif
diff --git a/board/isee/igep0020/igep0020.c b/board/isee/igep0020/igep0020.c
index 6a3777e..971e31b 100644
--- a/board/isee/igep0020/igep0020.c
+++ b/board/isee/igep0020/igep0020.c
@@ -52,8 +52,6 @@ static const u32 gpmc_lan_config[] = {
int board_init(void)
{
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
- /* board id for Linux */
- gd->bd->bi_arch_number = MACH_TYPE_IGEP0020;
/* boot param addr */
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
@@ -96,7 +94,7 @@ static void setup_net_chip(void)
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0);
+ omap_mmc_init(0, 0, 0);
return 0;
}
#endif
diff --git a/board/isee/igep0030/igep0030.c b/board/isee/igep0030/igep0030.c
index 6a92735..653c1b5 100644
--- a/board/isee/igep0030/igep0030.c
+++ b/board/isee/igep0030/igep0030.c
@@ -39,8 +39,6 @@ DECLARE_GLOBAL_DATA_PTR;
int board_init(void)
{
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
- /* board id for Linux */
- gd->bd->bi_arch_number = MACH_TYPE_IGEP0030;
/* boot param addr */
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
@@ -50,7 +48,7 @@ int board_init(void)
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0);
+ omap_mmc_init(0, 0, 0);
return 0;
}
#endif
diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c
index 0a105bf..d316f33 100644
--- a/board/logicpd/am3517evm/am3517evm.c
+++ b/board/logicpd/am3517evm/am3517evm.c
@@ -79,7 +79,7 @@ void set_muxconf_regs(void)
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0);
+ omap_mmc_init(0, 0, 0);
return 0;
}
#endif
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c
index bc7ec68..12bcfcb 100644
--- a/board/logicpd/omap3som/omap3logic.c
+++ b/board/logicpd/omap3som/omap3logic.c
@@ -140,21 +140,10 @@ int board_init(void)
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- return omap_mmc_init(0);
+ return omap_mmc_init(0, 0, 0);
}
#endif
-/*
- * Routine: misc_init_r
- * Description: display die ID register
- */
-int misc_init_r(void)
-{
- dieid_num_r();
-
- return 0;
-}
-
#ifdef CONFIG_SMC911X
/* GPMC CS1 settings for Logic SOM LV/Torpedo LAN92xx Ethernet chip */
static const u32 gpmc_lan92xx_config[] = {
diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c
index dec0b26..90b6b0f 100644
--- a/board/logicpd/zoom1/zoom1.c
+++ b/board/logicpd/zoom1/zoom1.c
@@ -92,7 +92,7 @@ void set_muxconf_regs(void)
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0);
+ omap_mmc_init(0, 0, 0);
return 0;
}
#endif
diff --git a/board/logicpd/zoom2/zoom2.c b/board/logicpd/zoom2/zoom2.c
index be3083d..8e18019 100644
--- a/board/logicpd/zoom2/zoom2.c
+++ b/board/logicpd/zoom2/zoom2.c
@@ -183,7 +183,7 @@ void set_muxconf_regs (void)
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0);
+ omap_mmc_init(0, 0, 0);
return 0;
}
#endif
diff --git a/board/matrix_vision/mvblx/mvblx.c b/board/matrix_vision/mvblx/mvblx.c
index 74b5b19..f68f312 100644
--- a/board/matrix_vision/mvblx/mvblx.c
+++ b/board/matrix_vision/mvblx/mvblx.c
@@ -106,8 +106,8 @@ void set_muxconf_regs(void)
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0);
- omap_mmc_init(1);
+ omap_mmc_init(0, 0, 0);
+ omap_mmc_init(1, 0, 0);
return 0;
}
#endif
diff --git a/board/nvidia/common/Makefile b/board/nvidia/common/Makefile
index 3e748fd..a93d458 100644
--- a/board/nvidia/common/Makefile
+++ b/board/nvidia/common/Makefile
@@ -27,6 +27,7 @@ LIB = $(obj)lib$(VENDOR).o
COBJS-y += board.o
COBJS-$(CONFIG_SPI_UART_SWITCH) += uart-spi-switch.o
+COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o
COBJS := $(COBJS-y)
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index 85dd359..2e22133 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -23,6 +23,7 @@
#include <common.h>
#include <ns16550.h>
+#include <linux/compiler.h>
#include <asm/io.h>
#include <asm/arch/tegra2.h>
#include <asm/arch/sys_proto.h>
@@ -30,12 +31,17 @@
#include <asm/arch/board.h>
#include <asm/arch/clk_rst.h>
#include <asm/arch/clock.h>
+#include <asm/arch/emc.h>
#include <asm/arch/pinmux.h>
+#include <asm/arch/pmc.h>
+#include <asm/arch/pmu.h>
#include <asm/arch/uart.h>
+#include <asm/arch/warmboot.h>
#include <spi.h>
#include <asm/arch/usb.h>
#include <i2c.h>
#include "board.h"
+#include "emc.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -59,11 +65,28 @@ void __pin_mux_usb(void)
void pin_mux_usb(void) __attribute__((weak, alias("__pin_mux_usb")));
/*
+ * Routine: power_det_init
+ * Description: turn off power detects
+ */
+static void power_det_init(void)
+{
+#if defined(CONFIG_TEGRA2)
+ struct pmc_ctlr *const pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE;
+
+ /* turn off power detects */
+ writel(0, &pmc->pmc_pwr_det_latch);
+ writel(0, &pmc->pmc_pwr_det);
+#endif
+}
+
+/*
* Routine: board_init
* Description: Early hardware init.
*/
int board_init(void)
{
+ __maybe_unused int err;
+
/* Do clocks and UART first so that printf() works */
clock_init();
clock_verify();
@@ -76,18 +99,35 @@ int board_init(void)
#endif
/* boot param addr */
gd->bd->bi_boot_params = (NV_PA_SDRAM_BASE + 0x100);
+
+ power_det_init();
+
#ifdef CONFIG_TEGRA_I2C
#ifndef CONFIG_SYS_I2C_INIT_BOARD
#error "You must define CONFIG_SYS_I2C_INIT_BOARD to use i2c on Nvidia boards"
#endif
i2c_init_board();
-#endif
+# ifdef CONFIG_TEGRA_PMU
+ if (pmu_set_nominal())
+ debug("Failed to select nominal voltages\n");
+# ifdef CONFIG_TEGRA_CLOCK_SCALING
+ err = board_emc_init();
+ if (err)
+ debug("Memory controller init failed: %d\n", err);
+# endif
+# endif /* CONFIG_TEGRA_PMU */
+#endif /* CONFIG_TEGRA_I2C */
#ifdef CONFIG_USB_EHCI_TEGRA
pin_mux_usb();
board_usb_init(gd->fdt_blob);
#endif
+#ifdef CONFIG_TEGRA2_LP0
+ /* prepare the WB code to LP0 location */
+ warmboot_prepare_code(TEGRA_LP0_ADDR, TEGRA_LP0_SIZE);
+#endif
+
return 0;
}
diff --git a/board/nvidia/common/emc.c b/board/nvidia/common/emc.c
new file mode 100644
index 0000000..8e4290c
--- /dev/null
+++ b/board/nvidia/common/emc.c
@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/ap20.h>
+#include <asm/arch/clk_rst.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/emc.h>
+#include <asm/arch/pmu.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/tegra2.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/* These rates are hard-coded for now, until fdt provides them */
+#define EMC_SDRAM_RATE_T20 (333000 * 2 * 1000)
+#define EMC_SDRAM_RATE_T25 (380000 * 2 * 1000)
+
+int board_emc_init(void)
+{
+ unsigned rate;
+
+ switch (tegra_get_chip_type()) {
+ default:
+ case TEGRA_SOC_T20:
+ rate = EMC_SDRAM_RATE_T20;
+ break;
+ case TEGRA_SOC_T25:
+ rate = EMC_SDRAM_RATE_T25;
+ break;
+ }
+ return tegra_set_emc(gd->fdt_blob, rate);
+}
diff --git a/board/nvidia/common/emc.h b/board/nvidia/common/emc.h
new file mode 100644
index 0000000..ec1b115
--- /dev/null
+++ b/board/nvidia/common/emc.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors.
+ * (C) Copyright 2010,2011 NVIDIA Corporation <www.nvidia.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef _NVIDIA_EMC_H_
+#define _NVIDIA_EMC_H_
+
+int board_emc_init(void);
+
+#endif
diff --git a/board/nvidia/dts/tegra2-seaboard.dts b/board/nvidia/dts/tegra2-seaboard.dts
index 6ba3ec4..3352539 100644
--- a/board/nvidia/dts/tegra2-seaboard.dts
+++ b/board/nvidia/dts/tegra2-seaboard.dts
@@ -89,4 +89,68 @@
i2c@7000c500 {
clock-frequency = <100000>;
};
+
+ emc@7000f400 {
+ emc-table@190000 {
+ reg = < 190000 >;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = < 190000 >;
+ nvidia,emc-registers = < 0x0000000c 0x00000026
+ 0x00000009 0x00000003 0x00000004 0x00000004
+ 0x00000002 0x0000000c 0x00000003 0x00000003
+ 0x00000002 0x00000001 0x00000004 0x00000005
+ 0x00000004 0x00000009 0x0000000d 0x0000059f
+ 0x00000000 0x00000003 0x00000003 0x00000003
+ 0x00000003 0x00000001 0x0000000b 0x000000c8
+ 0x00000003 0x00000007 0x00000004 0x0000000f
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0xa06204ae
+ 0x007dc010 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000 >;
+ };
+ emc-table@380000 {
+ reg = < 380000 >;
+ compatible = "nvidia,tegra20-emc-table";
+ clock-frequency = < 380000 >;
+ nvidia,emc-registers = < 0x00000017 0x0000004b
+ 0x00000012 0x00000006 0x00000004 0x00000005
+ 0x00000003 0x0000000c 0x00000006 0x00000006
+ 0x00000003 0x00000001 0x00000004 0x00000005
+ 0x00000004 0x00000009 0x0000000d 0x00000b5f
+ 0x00000000 0x00000003 0x00000003 0x00000006
+ 0x00000006 0x00000001 0x00000011 0x000000c8
+ 0x00000003 0x0000000e 0x00000007 0x0000000f
+ 0x00000002 0x00000000 0x00000000 0x00000002
+ 0x00000000 0x00000000 0x00000083 0xe044048b
+ 0x007d8010 0x00000000 0x00000000 0x00000000
+ 0x00000000 0x00000000 0x00000000 0x00000000 >;
+ };
+ };
+
+ kbc@7000e200 {
+ linux,keymap = <0x00020011 0x0003001f 0x0004001e 0x0005002c
+ 0x000701d0 0x0107007d 0x02060064 0x02070038 0x03000006
+ 0x03010005 0x03020013 0x03030012 0x03040021 0x03050020
+ 0x0306002d 0x04000008 0x04010007 0x04020014 0x04030023
+ 0x04040022 0x0405002f 0x0406002e 0x04070039 0x0500000a
+ 0x05010009 0x05020016 0x05030015 0x05040024 0x05050031
+ 0x05060030 0x0507002b 0x0600000c 0x0601000b 0x06020018
+ 0x06030017 0x06040026 0x06050025 0x06060033 0x06070032
+ 0x0701000d 0x0702001b 0x0703001c 0x0707008b 0x08040036
+ 0x0805002a 0x09050061 0x0907001d 0x0b00001a 0x0b010019
+ 0x0b020028 0x0b030027 0x0b040035 0x0b050034 0x0c000044
+ 0x0c010043 0x0c02000e 0x0c030004 0x0c040003 0x0c050067
+ 0x0c0600d2 0x0c070077 0x0d00006e 0x0d01006f 0x0d030068
+ 0x0d04006d 0x0d05006a 0x0d06006c 0x0d070069 0x0e000057
+ 0x0e010058 0x0e020042 0x0e030010 0x0e04003e 0x0e05003d
+ 0x0e060002 0x0e070041 0x0f000001 0x0f010029 0x0f02003f
+ 0x0f03000f 0x0f04003b 0x0f05003c 0x0f06003a 0x0f070040
+ 0x14000047 0x15000049 0x15010048 0x1502004b 0x1504004f
+ 0x16010062 0x1602004d 0x1603004c 0x16040051 0x16050050
+ 0x16070052 0x1b010037 0x1b03004a 0x1b04004e 0x1b050053
+ 0x1c050073 0x1d030066 0x1d04006b 0x1d0500e0 0x1d060072
+ 0x1d0700e1 0x1e000045 0x1e010046 0x1e020071
+ 0x1f04008a>;
+ linux,fn-keymap = <0x05040002>;
+ };
};
diff --git a/board/overo/overo.c b/board/overo/overo.c
index 7b4064c..f973870 100644
--- a/board/overo/overo.c
+++ b/board/overo/overo.c
@@ -403,7 +403,7 @@ int board_eth_init(bd_t *bis)
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0);
+ omap_mmc_init(0, 0, 0);
return 0;
}
#endif
diff --git a/board/pandora/pandora.c b/board/pandora/pandora.c
index 58a676d..3a62e9d 100644
--- a/board/pandora/pandora.c
+++ b/board/pandora/pandora.c
@@ -32,6 +32,7 @@
#include <common.h>
#include <twl4030.h>
#include <asm/io.h>
+#include <asm/gpio.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/mux.h>
#include <asm/arch/gpio.h>
@@ -45,6 +46,10 @@ DECLARE_GLOBAL_DATA_PTR;
#define TWL4030_BB_CFG_BBSEL_3200MV (3 << 2)
#define TWL4030_BB_CFG_BBISEL_500UA 2
+#define CONTROL_WKUP_CTRL 0x48002a5c
+#define GPIO_IO_PWRDNZ (1 << 6)
+#define PBIASLITEVMODE1 (1 << 8)
+
/*
* Routine: board_init
* Description: Early hardware init.
@@ -60,29 +65,52 @@ int board_init(void)
return 0;
}
+static void set_output_gpio(unsigned int gpio, int value)
+{
+ int ret;
+
+ ret = gpio_request(gpio, "");
+ if (ret != 0) {
+ printf("could not request GPIO %u\n", gpio);
+ return;
+ }
+ ret = gpio_direction_output(gpio, value);
+ if (ret != 0)
+ printf("could not set GPIO %u to %d\n", gpio, value);
+}
+
/*
* Routine: misc_init_r
* Description: Configure board specific parts
*/
int misc_init_r(void)
{
- struct gpio *gpio1_base = (struct gpio *)OMAP34XX_GPIO1_BASE;
- struct gpio *gpio4_base = (struct gpio *)OMAP34XX_GPIO4_BASE;
- struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE;
- struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE;
+ t2_t *t2_base = (t2_t *)T2_BASE;
+ u32 pbias_lite;
twl4030_led_init(TWL4030_LED_LEDEN_LEDBON);
- /* Configure GPIOs to output */
- writel(~(GPIO14 | GPIO15 | GPIO16 | GPIO23), &gpio1_base->oe);
- writel(~GPIO22, &gpio4_base->oe); /* 118 */
- writel(~(GPIO0 | GPIO1 | GPIO28 | GPIO29 | GPIO30 | GPIO31),
- &gpio5_base->oe); /* 128, 129, 156-159 */
- writel(~GPIO4, &gpio6_base->oe); /* 164 */
+ /* set up dual-voltage GPIOs to 1.8V */
+ pbias_lite = readl(&t2_base->pbias_lite);
+ pbias_lite &= ~PBIASLITEVMODE1;
+ pbias_lite |= PBIASLITEPWRDNZ1;
+ writel(pbias_lite, &t2_base->pbias_lite);
+ if (get_cpu_family() == CPU_OMAP36XX)
+ writel(readl(CONTROL_WKUP_CTRL) | GPIO_IO_PWRDNZ,
+ CONTROL_WKUP_CTRL);
+
+ /* make sure audio and BT chips are in powerdown state */
+ set_output_gpio(14, 0);
+ set_output_gpio(15, 0);
+ set_output_gpio(118, 0);
+
+ /* enable USB supply */
+ set_output_gpio(164, 1);
- /* Set GPIOs */
- writel(GPIO28, &gpio5_base->setdataout);
- writel(GPIO4, &gpio6_base->setdataout);
+ /* wifi needs a short pulse to enter powersave state */
+ set_output_gpio(23, 1);
+ udelay(5000);
+ gpio_direction_output(23, 0);
/* Enable battery backup capacitor (3.2V, 0.5mA charge current) */
twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER,
@@ -103,12 +131,15 @@ int misc_init_r(void)
void set_muxconf_regs(void)
{
MUX_PANDORA();
+ if (get_cpu_family() == CPU_OMAP36XX) {
+ MUX_PANDORA_3730();
+ }
}
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0);
+ omap_mmc_init(0, 0, 0);
return 0;
}
#endif
diff --git a/board/pandora/pandora.h b/board/pandora/pandora.h
index f0ad16b..fea8bf2 100644
--- a/board/pandora/pandora.h
+++ b/board/pandora/pandora.h
@@ -399,4 +399,10 @@ const omap3_sysinfo sysinfo = {
MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0)) /*sdrc_cke0*/\
MUX_VAL(CP(SDRC_CKE1), (IDIS | PTU | EN | M0)) /*sdrc_cke1*/
+#define MUX_PANDORA_3730() \
+ MUX_VAL(CP(GPIO126), (IEN | PTD | DIS | M4)) /*GPIO_126 - MMC1_WP*/\
+ MUX_VAL(CP(GPIO127), (IEN | PTD | DIS | M4)) /*GPIO_127 - MMC2_WP*/\
+ MUX_VAL(CP(GPIO128), (IDIS | PTD | DIS | M4)) /*GPIO_128 - LED_MMC1*/\
+ MUX_VAL(CP(GPIO129), (IDIS | PTD | DIS | M4)) /*GPIO_129 - LED_MMC2*/
+
#endif
diff --git a/board/raidsonic/ib62x0/Makefile b/board/raidsonic/ib62x0/Makefile
new file mode 100644
index 0000000..d450f8d
--- /dev/null
+++ b/board/raidsonic/ib62x0/Makefile
@@ -0,0 +1,43 @@
+#
+# (C) Copyright 2009
+# Marvell Semiconductor <www.marvell.com>
+# Written-by: Prafulla Wadaskar <prafulla@marvell.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := ib62x0.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/raidsonic/ib62x0/ib62x0.c b/board/raidsonic/ib62x0/ib62x0.c
new file mode 100644
index 0000000..65f2c2e
--- /dev/null
+++ b/board/raidsonic/ib62x0/ib62x0.c
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) 2011-2012
+ * Gerald Kerma <dreagle@doukki.net>
+ * Luka Perkov <uboot@lukaperkov.net>
+ * Simon Baatz <gmbnomis@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <miiphy.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/kirkwood.h>
+#include <asm/arch/mpp.h>
+#include "ib62x0.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_early_init_f(void)
+{
+ /*
+ * default gpio configuration
+ * There are maximum 64 gpios controlled through 2 sets of registers
+ * the below configuration configures mainly initial LED status
+ */
+ kw_config_gpio(IB62x0_OE_VAL_LOW,
+ IB62x0_OE_VAL_HIGH,
+ IB62x0_OE_LOW, IB62x0_OE_HIGH);
+
+ /* Multi-Purpose Pins Functionality configuration */
+ u32 kwmpp_config[] = {
+ MPP0_NF_IO2,
+ MPP1_NF_IO3,
+ MPP2_NF_IO4,
+ MPP3_NF_IO5,
+ MPP4_NF_IO6,
+ MPP5_NF_IO7,
+ MPP6_SYSRST_OUTn,
+ MPP8_TW_SDA,
+ MPP9_TW_SCK,
+ MPP10_UART0_TXD,
+ MPP11_UART0_RXD,
+ MPP18_NF_IO0,
+ MPP19_NF_IO1,
+ MPP20_SATA1_ACTn,
+ MPP21_SATA0_ACTn,
+ MPP22_GPIO, /* Power LED red */
+ MPP24_GPIO, /* Power off device */
+ MPP25_GPIO, /* Power LED green */
+ MPP27_GPIO, /* USB transfer LED */
+ MPP28_GPIO, /* Reset button */
+ MPP29_GPIO, /* USB Copy button */
+ 0
+ };
+ kirkwood_mpp_conf(kwmpp_config);
+ return 0;
+}
+
+int board_init(void)
+{
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100;
+
+ return 0;
+}
diff --git a/board/raidsonic/ib62x0/ib62x0.h b/board/raidsonic/ib62x0/ib62x0.h
new file mode 100644
index 0000000..0c30690
--- /dev/null
+++ b/board/raidsonic/ib62x0/ib62x0.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (C) 2011-2012
+ * Gerald Kerma <dreagle@doukki.net>
+ * Simon Baatz <gmbnomis@gmail.com>
+ * Luka Perkov <uboot@lukaperkov.net>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __IB62x0_H
+#define __IB62x0_H
+
+#define IB62x0_OE_LOW (~(1 << 22 | 1 << 24 | 1 << 25 | 1 << 27))
+#define IB62x0_OE_HIGH (~(0))
+#define IB62x0_OE_VAL_LOW 0
+#define IB62x0_OE_VAL_HIGH 0
+
+/* PHY related */
+#define MV88E1116_LED_FCTRL_REG 10
+#define MV88E1116_CPRSP_CR3_REG 21
+#define MV88E1116_MAC_CTRL_REG 21
+#define MV88E1116_PGADR_REG 22
+#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
+#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
+
+#endif /* __IB62x0_H */
diff --git a/board/raidsonic/ib62x0/kwbimage.cfg b/board/raidsonic/ib62x0/kwbimage.cfg
new file mode 100644
index 0000000..bd594eb
--- /dev/null
+++ b/board/raidsonic/ib62x0/kwbimage.cfg
@@ -0,0 +1,169 @@
+#
+# Copyright (C) 2011-2012
+# Gerald Kerma <dreagle@doukki.net>
+# Simon Baatz <gmbnomis@gmail.com>
+# Luka Perkov <uboot@lukaperkov.net>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+#
+# Refer docs/README.kwimage for more details about how-to configure
+# and create kirkwood boot image
+#
+
+# Boot Media configurations
+BOOT_FROM nand # change from nand to uart if building UART image
+NAND_ECC_MODE default
+NAND_PAGE_SIZE 0x0800
+
+# SOC registers configuration using bootrom header extension
+# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
+
+# Configure RGMII-0 interface pad voltage to 1.8V
+DATA 0xffd100e0 0x1b1b1b9b
+
+#Dram initalization for SINGLE x16 CL=5 @ 400MHz
+DATA 0xffd01400 0x43000c30 # DDR Configuration register
+# bit13-0: 0xc30, (3120 DDR2 clks refresh rate)
+# bit23-14: 0x0,
+# bit24: 0x1, enable exit self refresh mode on DDR access
+# bit25: 0x1, required
+# bit29-26: 0x0,
+# bit31-30: 0x1,
+
+DATA 0xffd01404 0x37543000 # DDR Controller Control Low
+# bit4: 0x0, addr/cmd in smame cycle
+# bit5: 0x0, clk is driven during self refresh, we don't care for APX
+# bit6: 0x0, use recommended falling edge of clk for addr/cmd
+# bit14: 0x0, input buffer always powered up
+# bit18: 0x1, cpu lock transaction enabled
+# bit23-20: 0x5, recommended value for CL=5 and STARTBURST_DEL disabled bit31=0
+# bit27-24: 0x7, CL+2, STARTBURST sample stages, for freqs 400MHz, unbuffered DIMM
+# bit30-28: 0x3, required
+# bit31: 0x0, no additional STARTBURST delay
+
+DATA 0xffd01408 0x22125451 # DDR Timing (Low) (active cycles value +1)
+# bit3-0: TRAS lsbs
+# bit7-4: TRCD
+# bit11-8: TRP
+# bit15-12: TWR
+# bit19-16: TWTR
+# bit20: TRAS msb
+# bit23-21: 0x0
+# bit27-24: TRRD
+# bit31-28: TRTP
+
+DATA 0xffd0140c 0x00000a33 # DDR Timing (High)
+# bit6-0: TRFC
+# bit8-7: TR2R
+# bit10-9: TR2W
+# bit12-11: TW2W
+# bit31-13: 0x0, required
+
+DATA 0xffd01410 0x0000000c # DDR Address Control
+# bit1-0: 00, Cs0width (x8)
+# bit3-2: 11, Cs0size (1Gb)
+# bit5-4: 00, Cs1width (x8)
+# bit7-6: 11, Cs1size (1Gb)
+# bit9-8: 00, Cs2width (nonexistent
+# bit11-10: 00, Cs2size (nonexistent
+# bit13-12: 00, Cs3width (nonexistent
+# bit15-14: 00, Cs3size (nonexistent
+# bit16: 0, Cs0AddrSel
+# bit17: 0, Cs1AddrSel
+# bit18: 0, Cs2AddrSel
+# bit19: 0, Cs3AddrSel
+# bit31-20: 0x0, required
+
+DATA 0xffd01414 0x00000000 # DDR Open Pages Control
+# bit0: 0, OpenPage enabled
+# bit31-1: 0x0, required
+
+DATA 0xffd01418 0x00000000 # DDR Operation
+# bit3-0: 0x0, DDR cmd
+# bit31-4: 0x0, required
+
+DATA 0xffd0141c 0x00000c52 # DDR Mode
+# bit2-0: 0x2, BurstLen=2 required
+# bit3: 0x0, BurstType=0 required
+# bit6-4: 0x4, CL=5
+# bit7: 0x0, TestMode=0 normal
+# bit8: 0x0, DLL reset=0 normal
+# bit11-9: 0x6, auto-precharge write recovery ????????????
+# bit12: 0x0, PD must be zero
+# bit31-13: 0x0, required
+
+DATA 0xffd01420 0x00000040 # DDR Extended Mode
+# bit0: 0, DDR DLL enabled
+# bit1: 0, DDR drive strenght normal
+# bit2: 1, DDR ODT control lsd (disabled)
+# bit5-3: 0x0, required
+# bit6: 0, DDR ODT control msb, (disabled)
+# bit9-7: 0x0, required
+# bit10: 0, differential DQS enabled
+# bit11: 0, required
+# bit12: 0, DDR output buffer enabled
+# bit31-13: 0x0, required
+
+DATA 0xffd01424 0x0000f17f # DDR Controller Control High
+# bit2-0: 0x7, required
+# bit3: 0x1, MBUS Burst Chop disabled
+# bit6-4: 0x7, required
+# bit7: 0x0,
+# bit8: 0x1, add writepath sample stage, must be 1 for DDR freq >= 300MHz
+# bit9: 0x0, no half clock cycle addition to dataout
+# bit10: 0x0, 1/4 clock cycle skew enabled for addr/ctl signals
+# bit11: 0x0, 1/4 clock cycle skew disabled for write mesh
+# bit15-12: 0xf, required
+# bit31-16: 0, required
+
+DATA 0xffd01428 0x00085520 # DDR2 ODT Read Timing (default values)
+DATA 0xffd0147c 0x00008552 # DDR2 ODT Write Timing (default values)
+
+DATA 0xffd01500 0x00000000 # CS[0]n Base address to 0x0
+DATA 0xffd01504 0x0ffffff1 # CS[0]n Size
+# bit0: 0x1, Window enabled
+# bit1: 0x0, Write Protect disabled
+# bit3-2: 0x0, CS0 hit selected
+# bit23-4: 0xfffff, required
+# bit31-24: 0x0f, Size (i.e. 256MB)
+
+DATA 0xffd01508 0x10000000 # CS[1]n Base address to 256Mb
+DATA 0xffd0150c 0x00000000 # CS[1]n Size, window disabled
+
+DATA 0xffd01514 0x00000000 # CS[2]n Size, window disabled
+DATA 0xffd0151c 0x00000000 # CS[3]n Size, window disabled
+
+DATA 0xffd01494 0x00030000 # DDR ODT Control (Low)
+# bit3-0: ODT0Rd, MODT[0] asserted during read from DRAM CS1
+# bit7-4: ODT0Rd, MODT[0] asserted during read from DRAM CS0
+# bit19-16:2, ODT0Wr, MODT[0] asserted during write to DRAM CS1
+# bit23-20:1, ODT0Wr, MODT[0] asserted during write to DRAM CS0
+
+DATA 0xffd01498 0x00000000 # DDR ODT Control (High)
+# bit1-0: 0x0, ODT0 controlled by ODT Control (low) register above
+# bit3-2: 0x1, ODT1 active NEVER!
+# bit31-4: 0x0, required
+
+DATA 0xffd0149c 0x0000e803 # CPU ODT Control
+DATA 0xffd01480 0x00000001 # DDR Initialization Control
+# bit0: 0x1, enable DDR init upon this register write
+
+DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register
+DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register
+
+# End of Header extension
+DATA 0x0 0x0
diff --git a/board/samsung/smdk5250/tzpc_init.c b/board/samsung/smdk5250/tzpc_init.c
index c2ccef3..c833541 100644
--- a/board/samsung/smdk5250/tzpc_init.c
+++ b/board/samsung/smdk5250/tzpc_init.c
@@ -28,11 +28,11 @@
/* Setting TZPC[TrustZone Protection Controller] */
void tzpc_init(void)
{
- struct exynos5_tzpc *tzpc;
+ struct exynos_tzpc *tzpc;
unsigned int addr;
for (addr = TZPC0_BASE; addr <= TZPC9_BASE; addr += TZPC_BASE_OFFSET) {
- tzpc = (struct exynos5_tzpc *)addr;
+ tzpc = (struct exynos_tzpc *)addr;
if (addr == TZPC0_BASE)
writel(R0SIZE, &tzpc->r0size);
diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c
index aa4291d..3085de1 100644
--- a/board/samsung/trats/trats.c
+++ b/board/samsung/trats/trats.c
@@ -2,6 +2,7 @@
* Copyright (C) 2011 Samsung Electronics
* Heungjun Kim <riverful.kim@samsung.com>
* Kyungmin Park <kyungmin.park@samsung.com>
+ * Donghwa Lee <dh09.lee@samsung.com>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -23,16 +24,19 @@
*/
#include <common.h>
+#include <lcd.h>
#include <asm/io.h>
#include <asm/arch/cpu.h>
#include <asm/arch/gpio.h>
#include <asm/arch/mmc.h>
#include <asm/arch/clock.h>
+#include <asm/arch/clk.h>
+#include <asm/arch/mipi_dsim.h>
#include <asm/arch/watchdog.h>
#include <asm/arch/power.h>
#include <pmic.h>
#include <usb/s3c_udc.h>
-#include <max8998_pmic.h>
+#include <max8997_pmic.h>
#include "setup.h"
@@ -216,26 +220,19 @@ static int s5pc210_phy_control(int on)
return -1;
if (on) {
- ret |= pmic_set_output(p,
- MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
- MAX8998_SAFEOUT1, LDO_ON);
- ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
- MAX8998_LDO3, LDO_ON);
- ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
- MAX8998_LDO8, LDO_ON);
-
+ ret |= pmic_set_output(p, MAX8997_REG_SAFEOUTCTRL,
+ ENSAFEOUT1, LDO_ON);
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, EN_LDO);
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, EN_LDO);
} else {
- ret |= pmic_set_output(p, MAX8998_REG_ONOFF2,
- MAX8998_LDO8, LDO_OFF);
- ret |= pmic_set_output(p, MAX8998_REG_ONOFF1,
- MAX8998_LDO3, LDO_OFF);
- ret |= pmic_set_output(p,
- MAX8998_REG_BUCK_ACTIVE_DISCHARGE3,
- MAX8998_SAFEOUT1, LDO_OFF);
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, DIS_LDO);
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, DIS_LDO);
+ ret |= pmic_set_output(p, MAX8997_REG_SAFEOUTCTRL,
+ ENSAFEOUT1, LDO_OFF);
}
if (ret) {
- puts("MAX8998 LDO setting error!\n");
+ puts("MAX8997 LDO setting error!\n");
return -1;
}
@@ -364,3 +361,145 @@ int board_early_init_f(void)
return 0;
}
+
+static void lcd_reset(void)
+{
+ struct exynos4_gpio_part2 *gpio2 =
+ (struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
+
+ s5p_gpio_direction_output(&gpio2->y4, 5, 1);
+ udelay(10000);
+ s5p_gpio_direction_output(&gpio2->y4, 5, 0);
+ udelay(10000);
+ s5p_gpio_direction_output(&gpio2->y4, 5, 1);
+}
+
+static int lcd_power(void)
+{
+ int ret = 0;
+ struct pmic *p = get_pmic();
+
+ if (pmic_probe(p))
+ return 0;
+
+ /* LDO15 voltage: 2.2v */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO15CTRL, 0x1c | EN_LDO);
+ /* LDO13 voltage: 3.0v */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO13CTRL, 0x2c | EN_LDO);
+
+ if (ret) {
+ puts("MAX8997 LDO setting error!\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static struct mipi_dsim_config dsim_config = {
+ .e_interface = DSIM_VIDEO,
+ .e_virtual_ch = DSIM_VIRTUAL_CH_0,
+ .e_pixel_format = DSIM_24BPP_888,
+ .e_burst_mode = DSIM_BURST_SYNC_EVENT,
+ .e_no_data_lane = DSIM_DATA_LANE_4,
+ .e_byte_clk = DSIM_PLL_OUT_DIV8,
+ .hfp = 1,
+
+ .p = 3,
+ .m = 120,
+ .s = 1,
+
+ /* D-PHY PLL stable time spec :min = 200usec ~ max 400usec */
+ .pll_stable_time = 500,
+
+ /* escape clk : 10MHz */
+ .esc_clk = 20 * 1000000,
+
+ /* stop state holding counter after bta change count 0 ~ 0xfff */
+ .stop_holding_cnt = 0x7ff,
+ /* bta timeout 0 ~ 0xff */
+ .bta_timeout = 0xff,
+ /* lp rx timeout 0 ~ 0xffff */
+ .rx_timeout = 0xffff,
+};
+
+static struct exynos_platform_mipi_dsim s6e8ax0_platform_data = {
+ .lcd_panel_info = NULL,
+ .dsim_config = &dsim_config,
+};
+
+static struct mipi_dsim_lcd_device mipi_lcd_device = {
+ .name = "s6e8ax0",
+ .id = -1,
+ .bus_id = 0,
+ .platform_data = (void *)&s6e8ax0_platform_data,
+};
+
+static int mipi_power(void)
+{
+ int ret = 0;
+ struct pmic *p = get_pmic();
+
+ if (pmic_probe(p))
+ return 0;
+
+ /* LDO3 voltage: 1.1v */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, 0x6 | EN_LDO);
+ /* LDO4 voltage: 1.8v */
+ ret |= pmic_reg_write(p, MAX8997_REG_LDO4CTRL, 0x14 | EN_LDO);
+
+ if (ret) {
+ puts("MAX8997 LDO setting error!\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+void init_panel_info(vidinfo_t *vid)
+{
+ vid->vl_freq = 60;
+ vid->vl_col = 720;
+ vid->vl_row = 1280;
+ vid->vl_width = 720;
+ vid->vl_height = 1280;
+ vid->vl_clkp = CONFIG_SYS_HIGH;
+ vid->vl_hsp = CONFIG_SYS_LOW;
+ vid->vl_vsp = CONFIG_SYS_LOW;
+ vid->vl_dp = CONFIG_SYS_LOW;
+
+ vid->vl_bpix = 5;
+ vid->dual_lcd_enabled = 0;
+
+ /* s6e8ax0 Panel */
+ vid->vl_hspw = 5;
+ vid->vl_hbpd = 10;
+ vid->vl_hfpd = 10;
+
+ vid->vl_vspw = 2;
+ vid->vl_vbpd = 1;
+ vid->vl_vfpd = 13;
+ vid->vl_cmd_allow_len = 0xf;
+
+ vid->win_id = 3;
+ vid->cfg_gpio = NULL;
+ vid->backlight_on = NULL;
+ vid->lcd_power_on = NULL; /* lcd_power_on in mipi dsi driver */
+ vid->reset_lcd = lcd_reset;
+
+ vid->init_delay = 0;
+ vid->power_on_delay = 0;
+ vid->reset_delay = 0;
+ vid->interface_mode = FIMD_RGB_INTERFACE;
+ vid->mipi_enabled = 1;
+
+ strcpy(s6e8ax0_platform_data.lcd_panel_name, mipi_lcd_device.name);
+ s6e8ax0_platform_data.lcd_power = lcd_power;
+ s6e8ax0_platform_data.mipi_power = mipi_power;
+ s6e8ax0_platform_data.phy_enable = set_mipi_phy_ctrl;
+ s6e8ax0_platform_data.lcd_panel_info = (void *)vid;
+ exynos_mipi_dsi_register_lcd_device(&mipi_lcd_device);
+ s6e8ax0_init();
+ exynos_set_dsim_platform_data(&s6e8ax0_platform_data);
+
+ setenv("lcdinfo", "lcd=s6e8ax0");
+}
diff --git a/board/samsung/universal_c210/universal.c b/board/samsung/universal_c210/universal.c
index d0ff834..90fff5c 100644
--- a/board/samsung/universal_c210/universal.c
+++ b/board/samsung/universal_c210/universal.c
@@ -58,13 +58,13 @@ int board_init(void)
gd->bd->bi_arch_number = MACH_TYPE_UNIVERSAL_C210;
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
- check_hw_revision();
- printf("HW Revision:\t0x%x\n", board_rev);
-
#if defined(CONFIG_PMIC)
pmic_init();
#endif
+ check_hw_revision();
+ printf("HW Revision:\t0x%x\n", board_rev);
+
return 0;
}
@@ -109,10 +109,27 @@ static unsigned short get_adc_value(int channel)
return ret;
}
+static int adc_power_control(int on)
+{
+ int ret;
+ struct pmic *p = get_pmic();
+
+ if (pmic_probe(p))
+ return -1;
+
+ ret = pmic_set_output(p,
+ MAX8998_REG_ONOFF1,
+ MAX8998_LDO4, !!on);
+
+ return ret;
+}
+
static unsigned int get_hw_revision(void)
{
int hwrev, mode0, mode1;
+ adc_power_control(1);
+
mode0 = get_adc_value(1); /* HWREV_MODE0 */
mode1 = get_adc_value(2); /* HWREV_MODE1 */
@@ -135,6 +152,8 @@ static unsigned int get_hw_revision(void)
debug("mode0: %d, mode1: %d, hwrev 0x%x\n", mode0, mode1, hwrev);
+ adc_power_control(0);
+
return hwrev;
}
diff --git a/board/technexion/twister/twister.c b/board/technexion/twister/twister.c
index b927586..c2b10ac 100644
--- a/board/technexion/twister/twister.c
+++ b/board/technexion/twister/twister.c
@@ -133,7 +133,7 @@ int board_eth_init(bd_t *bis)
!defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- return omap_mmc_init(0);
+ return omap_mmc_init(0, 0, 0);
}
#endif
diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
index c5eb42c..9fbaedd 100644
--- a/board/teejet/mt_ventoux/mt_ventoux.c
+++ b/board/teejet/mt_ventoux/mt_ventoux.c
@@ -196,13 +196,6 @@ int board_init(void)
return 0;
}
-int misc_init_r(void)
-{
- dieid_num_r();
-
- return 0;
-}
-
/*
* Routine: set_muxconf_regs
* Description: Setting up the configuration Mux registers specific to the
@@ -228,6 +221,6 @@ int board_eth_init(bd_t *bis)
!defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- return omap_mmc_init(0);
+ return omap_mmc_init(0, 0, 0);
}
#endif
diff --git a/board/ti/am3517crane/am3517crane.c b/board/ti/am3517crane/am3517crane.c
index 436645a..888398d 100644
--- a/board/ti/am3517crane/am3517crane.c
+++ b/board/ti/am3517crane/am3517crane.c
@@ -78,7 +78,7 @@ void set_muxconf_regs(void)
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0);
+ omap_mmc_init(0, 0, 0);
return 0;
}
#endif
diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c
index e26b387..9edd3c5 100644
--- a/board/ti/beagle/beagle.c
+++ b/board/ti/beagle/beagle.c
@@ -477,7 +477,7 @@ void set_muxconf_regs(void)
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0);
+ omap_mmc_init(0, 0, 0);
return 0;
}
#endif
diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
index 8497aee..61fc7b5 100644
--- a/board/ti/evm/evm.c
+++ b/board/ti/evm/evm.c
@@ -278,7 +278,7 @@ int board_eth_init(bd_t *bis)
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0);
+ omap_mmc_init(0, 0, 0);
return 0;
}
#endif
diff --git a/board/ti/omap5912osk/omap5912osk.c b/board/ti/omap5912osk/omap5912osk.c
index 6f0e763..fac683a 100644
--- a/board/ti/omap5912osk/omap5912osk.c
+++ b/board/ti/omap5912osk/omap5912osk.c
@@ -81,13 +81,6 @@ int board_init (void)
return 0;
}
-
-int misc_init_r (void)
-{
- /* currently empty */
- return (0);
-}
-
/******************************
Routine:
Description:
diff --git a/board/ti/omap5_evm/evm.c b/board/ti/omap5_evm/evm.c
index ea0cb13..c8dfdf8 100644
--- a/board/ti/omap5_evm/evm.c
+++ b/board/ti/omap5_evm/evm.c
@@ -23,7 +23,7 @@
* MA 02111-1307 USA
*/
#include <common.h>
-#include <twl6030.h>
+#include <twl6035.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mmc_host_def.h>
@@ -63,8 +63,8 @@ int board_eth_init(bd_t *bis)
*/
int misc_init_r(void)
{
-#ifdef CONFIG_TWL6030_POWER
- twl6030_init_battery_charging();
+#ifdef CONFIG_TWL6035_POWER
+ twl6035_init_settings();
#endif
return 0;
}
@@ -94,8 +94,8 @@ void set_muxconf_regs_non_essential(void)
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0);
- omap_mmc_init(1);
+ omap_mmc_init(0, 0, 0);
+ omap_mmc_init(1, 0, 0);
return 0;
}
#endif
diff --git a/board/ti/omap5_evm/mux_data.h b/board/ti/omap5_evm/mux_data.h
index 18f4729..296eb68 100644
--- a/board/ti/omap5_evm/mux_data.h
+++ b/board/ti/omap5_evm/mux_data.h
@@ -2,8 +2,7 @@
* (C) Copyright 2010
* Texas Instruments Incorporated, <www.ti.com>
*
- * Balaji Krishnamoorthy <balajitk@ti.com>
- * Aneesh V <aneesh@ti.com>
+ * Sricharan R <r.sricharan@ti.com>
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -30,246 +29,276 @@
const struct pad_conf_entry core_padconf_array_essential[] = {
-{GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */
-{GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */
-{GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */
-{GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */
-{GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */
-{GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */
-{GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */
-{GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */
-{GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */
-{GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */
-{SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */
-{SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */
-{SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */
-{SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */
-{SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */
-{SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */
-{SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */
-{SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */
-{SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */
-{SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */
-{UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */
-{UART3_RTS_SD, (M0)}, /* uart3_rts_sd */
-{UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */
-{UART3_TX_IRTX, (M0)} /* uart3_tx */
+ {EMMC_CLK, (PTU | IEN | M0)}, /* EMMC_CLK */
+ {EMMC_CMD, (PTU | IEN | M0)}, /* EMMC_CMD */
+ {EMMC_DATA0, (PTU | IEN | M0)}, /* EMMC_DATA0 */
+ {EMMC_DATA1, (PTU | IEN | M0)}, /* EMMC_DATA1 */
+ {EMMC_DATA2, (PTU | IEN | M0)}, /* EMMC_DATA2 */
+ {EMMC_DATA3, (PTU | IEN | M0)}, /* EMMC_DATA3 */
+ {EMMC_DATA4, (PTU | IEN | M0)}, /* EMMC_DATA4 */
+ {EMMC_DATA5, (PTU | IEN | M0)}, /* EMMC_DATA5 */
+ {EMMC_DATA6, (PTU | IEN | M0)}, /* EMMC_DATA6 */
+ {EMMC_DATA7, (PTU | IEN | M0)}, /* EMMC_DATA7 */
+ {SDCARD_CLK, (PTU | IEN | M0)}, /* SDCARD_CLK */
+ {SDCARD_CMD, (PTU | IEN | M0)}, /* SDCARD_CMD */
+ {SDCARD_DATA0, (PTU | IEN | M0)}, /* SDCARD_DATA0*/
+ {SDCARD_DATA1, (PTU | IEN | M0)}, /* SDCARD_DATA1*/
+ {SDCARD_DATA2, (PTU | IEN | M0)}, /* SDCARD_DATA2*/
+ {SDCARD_DATA3, (PTU | IEN | M0)}, /* SDCARD_DATA3*/
+ {UART3_RX_IRRX, (PTU | IEN | M0)}, /* UART3_RX_IRRX */
+ {UART3_TX_IRTX, (M0)}, /* UART3_TX_IRTX */
};
const struct pad_conf_entry wkup_padconf_array_essential[] = {
-{PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
-{PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
-{PAD1_SYS_32K, (IEN | M0)} /* sys_32k */
+ {SR_PMIC_SCL, (PTU | IEN | M0)}, /* SR_PMIC_SCL */
+ {SR_PMIC_SDA, (PTU | IEN | M0)}, /* SR_PMIC_SDA */
+ {SYS_32K, (IEN | M0)}, /* SYS_32K */
};
const struct pad_conf_entry core_padconf_array_non_essential[] = {
- {GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_32 */
- {GPMC_AD9, (PTU | IEN | M3)}, /* gpio_33 */
- {GPMC_AD10, (PTU | IEN | M3)}, /* gpio_34 */
- {GPMC_AD11, (PTU | IEN | M3)}, /* gpio_35 */
- {GPMC_AD12, (PTU | IEN | M3)}, /* gpio_36 */
- {GPMC_AD13, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_37 */
- {GPMC_AD14, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_38 */
- {GPMC_AD15, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_39 */
- {GPMC_A16, (M3)}, /* gpio_40 */
- {GPMC_A17, (PTD | M3)}, /* gpio_41 */
- {GPMC_A18, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row6 */
- {GPMC_A19, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row7 */
- {GPMC_A20, (IEN | M3)}, /* gpio_44 */
- {GPMC_A21, (M3)}, /* gpio_45 */
- {GPMC_A22, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col6 */
- {GPMC_A23, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col7 */
- {GPMC_A24, (PTD | M3)}, /* gpio_48 */
- {GPMC_A25, (PTD | M3)}, /* gpio_49 */
- {GPMC_NCS0, (M3)}, /* gpio_50 */
- {GPMC_NCS1, (IEN | M3)}, /* gpio_51 */
- {GPMC_NCS2, (IEN | M3)}, /* gpio_52 */
- {GPMC_NCS3, (IEN | M3)}, /* gpio_53 */
- {GPMC_NWP, (M3)}, /* gpio_54 */
- {GPMC_CLK, (PTD | M3)}, /* gpio_55 */
- {GPMC_NADV_ALE, (M3)}, /* gpio_56 */
- {GPMC_NBE0_CLE, (M3)}, /* gpio_59 */
- {GPMC_NBE1, (PTD | M3)}, /* gpio_60 */
- {GPMC_WAIT0, (PTU | IEN | M3)}, /* gpio_61 */
- {GPMC_WAIT1, (IEN | M3)}, /* gpio_62 */
- {C2C_DATA11, (PTD | M3)}, /* gpio_100 */
- {C2C_DATA12, (M1)}, /* dsi1_te0 */
- {C2C_DATA13, (PTD | M3)}, /* gpio_102 */
- {C2C_DATA14, (M1)}, /* dsi2_te0 */
- {C2C_DATA15, (PTD | M3)}, /* gpio_104 */
- {HDMI_HPD, (M0)}, /* hdmi_hpd */
- {HDMI_CEC, (M0)}, /* hdmi_cec */
- {HDMI_DDC_SCL, (PTU | M0)}, /* hdmi_ddc_scl */
- {HDMI_DDC_SDA, (PTU | IEN | M0)}, /* hdmi_ddc_sda */
- {CSI21_DX0, (IEN | M0)}, /* csi21_dx0 */
- {CSI21_DY0, (IEN | M0)}, /* csi21_dy0 */
- {CSI21_DX1, (IEN | M0)}, /* csi21_dx1 */
- {CSI21_DY1, (IEN | M0)}, /* csi21_dy1 */
- {CSI21_DX2, (IEN | M0)}, /* csi21_dx2 */
- {CSI21_DY2, (IEN | M0)}, /* csi21_dy2 */
- {CSI21_DX3, (PTD | M7)}, /* csi21_dx3 */
- {CSI21_DY3, (PTD | M7)}, /* csi21_dy3 */
- {CSI21_DX4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)}, /* csi21_dx4 */
- {CSI21_DY4, (PTD | OFF_EN | OFF_PD | OFF_IN | M7)}, /* csi21_dy4 */
- {CSI22_DX0, (IEN | M0)}, /* csi22_dx0 */
- {CSI22_DY0, (IEN | M0)}, /* csi22_dy0 */
- {CSI22_DX1, (IEN | M0)}, /* csi22_dx1 */
- {CSI22_DY1, (IEN | M0)}, /* csi22_dy1 */
- {CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_shutter */
- {CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_strobe */
- {CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_83 */
- {USBB1_ULPITLL_CLK, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_cawake */
- {USBB1_ULPITLL_STP, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_cadata */
- {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_caflag */
- {USBB1_ULPITLL_NXT, (OFF_EN | M1)}, /* hsi1_acready */
- {USBB1_ULPITLL_DAT0, (OFF_EN | M1)}, /* hsi1_acwake */
- {USBB1_ULPITLL_DAT1, (OFF_EN | M1)}, /* hsi1_acdata */
- {USBB1_ULPITLL_DAT2, (OFF_EN | M1)}, /* hsi1_acflag */
- {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_caready */
- {USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */
- {USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */
- {USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */
- {USBB1_ULPITLL_DAT7, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat7 */
- {USBB1_HSIC_DATA, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_data */
- {USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */
- {USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */
- {USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */
- {ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_clkx */
- {ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dr */
- {ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dx */
- {ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_fsx */
- {ABE_MCBSP1_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp1_clkx */
- {ABE_MCBSP1_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp1_dr */
- {ABE_MCBSP1_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp1_dx */
- {ABE_MCBSP1_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp1_fsx */
- {ABE_PDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_ul_data */
- {ABE_PDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_dl_data */
- {ABE_PDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_frame */
- {ABE_PDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_lb_clk */
- {ABE_CLKS, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_clks */
- {ABE_DMIC_CLK1, (M0)}, /* abe_dmic_clk1 */
- {ABE_DMIC_DIN1, (IEN | M0)}, /* abe_dmic_din1 */
- {ABE_DMIC_DIN2, (IEN | M0)}, /* abe_dmic_din2 */
- {ABE_DMIC_DIN3, (IEN | M0)}, /* abe_dmic_din3 */
- {UART2_CTS, (PTU | IEN | M0)}, /* uart2_cts */
- {UART2_RTS, (M0)}, /* uart2_rts */
- {UART2_RX, (PTU | IEN | M0)}, /* uart2_rx */
- {UART2_TX, (M0)}, /* uart2_tx */
- {HDQ_SIO, (M3)}, /* gpio_127 */
- {MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_clk */
- {MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_somi */
- {MCSPI1_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_simo */
- {MCSPI1_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_cs0 */
- {MCSPI1_CS1, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* mcspi1_cs1 */
- {MCSPI1_CS2, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_139 */
- {MCSPI1_CS3, (PTU | IEN | M3)}, /* gpio_140 */
- {SDMMC5_CLK, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc5_clk */
- {SDMMC5_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_cmd */
- {SDMMC5_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat0 */
- {SDMMC5_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat1 */
- {SDMMC5_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat2 */
- {SDMMC5_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat3 */
- {MCSPI4_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_clk */
- {MCSPI4_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_simo */
- {MCSPI4_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_somi */
- {MCSPI4_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_cs0 */
- {UART4_RX, (IEN | M0)}, /* uart4_rx */
- {UART4_TX, (M0)}, /* uart4_tx */
- {USBB2_ULPITLL_CLK, (PTD | IEN | M3)}, /* gpio_157 */
- {USBB2_ULPITLL_STP, (IEN | M5)}, /* dispc2_data23 */
- {USBB2_ULPITLL_DIR, (IEN | M5)}, /* dispc2_data22 */
- {USBB2_ULPITLL_NXT, (IEN | M5)}, /* dispc2_data21 */
- {USBB2_ULPITLL_DAT0, (IEN | M5)}, /* dispc2_data20 */
- {USBB2_ULPITLL_DAT1, (IEN | M5)}, /* dispc2_data19 */
- {USBB2_ULPITLL_DAT2, (IEN | M5)}, /* dispc2_data18 */
- {USBB2_ULPITLL_DAT3, (IEN | M5)}, /* dispc2_data15 */
- {USBB2_ULPITLL_DAT4, (IEN | M5)}, /* dispc2_data14 */
- {USBB2_ULPITLL_DAT5, (IEN | M5)}, /* dispc2_data13 */
- {USBB2_ULPITLL_DAT6, (IEN | M5)}, /* dispc2_data12 */
- {USBB2_ULPITLL_DAT7, (IEN | M5)}, /* dispc2_data11 */
- {USBB2_HSIC_DATA, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_169 */
- {USBB2_HSIC_STROBE, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_170 */
- {UNIPRO_TX0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col0 */
- {UNIPRO_TY0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col1 */
- {UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col2 */
- {UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col3 */
- {UNIPRO_TX2, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col4 */
- {UNIPRO_TY2, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col5 */
- {UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row0 */
- {UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row1 */
- {UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row2 */
- {UNIPRO_RY1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row3 */
- {UNIPRO_RX2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row4 */
- {UNIPRO_RY2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row5 */
- {USBA0_OTG_CE, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* usba0_otg_ce */
- {USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dp */
- {USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dm */
- {FREF_CLK1_OUT, (M0)}, /* fref_clk1_out */
- {FREF_CLK2_OUT, (M0)}, /* fref_clk2_out */
- {SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */
- {SYS_NIRQ2, (M7)}, /* sys_nirq2 */
- {SYS_BOOT0, (PTU | IEN | M3)}, /* gpio_184 */
- {SYS_BOOT1, (M3)}, /* gpio_185 */
- {SYS_BOOT2, (PTD | IEN | M3)}, /* gpio_186 */
- {SYS_BOOT3, (PTD | IEN | M3)}, /* gpio_187 */
- {SYS_BOOT4, (M3)}, /* gpio_188 */
- {SYS_BOOT5, (PTD | IEN | M3)}, /* gpio_189 */
- {DPM_EMU0, (IEN | M0)}, /* dpm_emu0 */
- {DPM_EMU1, (IEN | M0)}, /* dpm_emu1 */
- {DPM_EMU2, (IEN | M0)}, /* dpm_emu2 */
- {DPM_EMU3, (IEN | M5)}, /* dispc2_data10 */
- {DPM_EMU4, (IEN | M5)}, /* dispc2_data9 */
- {DPM_EMU5, (IEN | M5)}, /* dispc2_data16 */
- {DPM_EMU6, (IEN | M5)}, /* dispc2_data17 */
- {DPM_EMU7, (IEN | M5)}, /* dispc2_hsync */
- {DPM_EMU8, (IEN | M5)}, /* dispc2_pclk */
- {DPM_EMU9, (IEN | M5)}, /* dispc2_vsync */
- {DPM_EMU10, (IEN | M5)}, /* dispc2_de */
- {DPM_EMU11, (IEN | M5)}, /* dispc2_data8 */
- {DPM_EMU12, (IEN | M5)}, /* dispc2_data7 */
- {DPM_EMU13, (IEN | M5)}, /* dispc2_data6 */
- {DPM_EMU14, (IEN | M5)}, /* dispc2_data5 */
- {DPM_EMU15, (IEN | M5)}, /* dispc2_data4 */
- {DPM_EMU16, (M3)}, /* gpio_27 */
- {DPM_EMU17, (IEN | M5)}, /* dispc2_data2 */
- {DPM_EMU18, (IEN | M5)}, /* dispc2_data1 */
- {DPM_EMU19, (IEN | M5)}, /* dispc2_data0 */
- {I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */
- {I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */
- {I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */
- {I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */
- {I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */
- {I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */
- {I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */
- {I2C4_SDA, (PTU | IEN | M0)} /* i2c4_sda */
+
+ {C2C_DATAIN0, (IEN | M0)}, /* C2C_DATAIN0 */
+ {C2C_DATAIN1, (IEN | M0)}, /* C2C_DATAIN1 */
+ {C2C_DATAIN2, (IEN | M0)}, /* C2C_DATAIN2 */
+ {C2C_DATAIN3, (IEN | M0)}, /* C2C_DATAIN3 */
+ {C2C_DATAIN4, (IEN | M0)}, /* C2C_DATAIN4 */
+ {C2C_DATAIN5, (IEN | M0)}, /* C2C_DATAIN5 */
+ {C2C_DATAIN6, (IEN | M0)}, /* C2C_DATAIN6 */
+ {C2C_DATAIN7, (IEN | M0)}, /* C2C_DATAIN7 */
+ {C2C_CLKIN1, (IEN | M0)}, /* C2C_CLKIN1 */
+ {C2C_CLKIN0, (IEN | M0)}, /* C2C_CLKIN0 */
+ {C2C_CLKOUT0, (M0)}, /* C2C_CLKOUT0 */
+ {C2C_CLKOUT1, (M0)}, /* C2C_CLKOUT1 */
+ {C2C_DATAOUT0, (M0)}, /* C2C_DATAOUT0 */
+ {C2C_DATAOUT1, (M0)}, /* C2C_DATAOUT1 */
+ {C2C_DATAOUT2, (M0)}, /* C2C_DATAOUT2 */
+ {C2C_DATAOUT3, (M0)}, /* C2C_DATAOUT3 */
+ {C2C_DATAOUT4, (M0)}, /* C2C_DATAOUT4 */
+ {C2C_DATAOUT5, (M0)}, /* C2C_DATAOUT5 */
+ {C2C_DATAOUT6, (M0)}, /* C2C_DATAOUT6 */
+ {C2C_DATAOUT7, (M0)}, /* C2C_DATAOUT7 */
+ {C2C_DATA8, (IEN | M0)}, /* C2C_DATA8 */
+ {C2C_DATA9, (IEN | M0)}, /* C2C_DATA9 */
+ {C2C_DATA10, (IEN | M0)}, /* C2C_DATA10 */
+ {C2C_DATA11, (IEN | M0)}, /* C2C_DATA11 */
+ {C2C_DATA12, (IEN | M0)}, /* C2C_DATA12 */
+ {C2C_DATA13, (IEN | M0)}, /* C2C_DATA13 */
+ {C2C_DATA14, (IEN | M0)}, /* C2C_DATA14 */
+ {C2C_DATA15, (IEN | M0)}, /* C2C_DATA15 */
+ {LLIB_WAKEREQOUT, (PTU | IEN | M6)}, /* GPIO2_32 */
+ {LLIA_WAKEREQOUT, (M1)}, /* C2C_WAKEREQOUT */
+ {HSI1_ACREADY, (PTD | M6)}, /* GPIO3_64 */
+ {HSI1_CAREADY, (PTD | M6)}, /* GPIO3_65 */
+ {HSI1_ACWAKE, (PTD | IEN | M6)}, /* GPIO3_66 */
+ {HSI1_CAWAKE, (PTU | IEN | M6)}, /* GPIO3_67 */
+ {HSI1_ACFLAG, (PTD | IEN | M6)}, /* GPIO3_68 */
+ {HSI1_ACDATA, (PTD | M6)}, /* GPIO3_69 */
+ {HSI1_CAFLAG, (M6)}, /* GPIO3_70 */
+ {HSI1_CADATA, (M6)}, /* GPIO3_71 */
+ {UART1_TX, (M0)}, /* UART1_TX */
+ {UART1_CTS, (PTU | IEN | M0)}, /* UART1_CTS */
+ {UART1_RX, (PTU | IEN | M0)}, /* UART1_RX */
+ {UART1_RTS, (M0)}, /* UART1_RTS */
+ {HSI2_CAREADY, (IEN | M0)}, /* HSI2_CAREADY */
+ {HSI2_ACREADY, (OFF_EN | M0)}, /* HSI2_ACREADY */
+ {HSI2_CAWAKE, (IEN | PTD | M0)}, /* HSI2_CAWAKE */
+ {HSI2_ACWAKE, (M0)}, /* HSI2_ACWAKE */
+ {HSI2_CAFLAG, (IEN | PTD | M0)}, /* HSI2_CAFLAG */
+ {HSI2_CADATA, (IEN | PTD | M0)}, /* HSI2_CADATA */
+ {HSI2_ACFLAG, (M0)}, /* HSI2_ACFLAG */
+ {HSI2_ACDATA, (M0)}, /* HSI2_ACDATA */
+ {UART2_RTS, (IEN | M1)}, /* MCSPI3_SOMI */
+ {UART2_CTS, (IEN | M1)}, /* MCSPI3_CS0 */
+ {UART2_RX, (IEN | M1)}, /* MCSPI3_SIMO */
+ {UART2_TX, (IEN | M1)}, /* MCSPI3_CLK */
+ {USBB1_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB1_HSIC_STROBE */
+ {USBB1_HSIC_DATA, (PTU | IEN | M0)}, /* USBB1_HSIC_DATA */
+ {USBB2_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB2_HSIC_STROBE */
+ {USBB2_HSIC_DATA, (PTU | IEN | M0)}, /* USBB2_HSIC_DATA */
+ {TIMER10_PWM_EVT, (IEN | M0)}, /* TIMER10_PWM_EVT */
+ {DSIPORTA_TE0, (IEN | M0)}, /* DSIPORTA_TE0 */
+ {DSIPORTA_LANE0X, (IEN | M0)}, /* DSIPORTA_LANE0X */
+ {DSIPORTA_LANE0Y, (IEN | M0)}, /* DSIPORTA_LANE0Y */
+ {DSIPORTA_LANE1X, (IEN | M0)}, /* DSIPORTA_LANE1X */
+ {DSIPORTA_LANE1Y, (IEN | M0)}, /* DSIPORTA_LANE1Y */
+ {DSIPORTA_LANE2X, (IEN | M0)}, /* DSIPORTA_LANE2X */
+ {DSIPORTA_LANE2Y, (IEN | M0)}, /* DSIPORTA_LANE2Y */
+ {DSIPORTA_LANE3X, (IEN | M0)}, /* DSIPORTA_LANE3X */
+ {DSIPORTA_LANE3Y, (IEN | M0)}, /* DSIPORTA_LANE3Y */
+ {DSIPORTA_LANE4X, (IEN | M0)}, /* DSIPORTA_LANE4X */
+ {DSIPORTA_LANE4Y, (IEN | M0)}, /* DSIPORTA_LANE4Y */
+ {TIMER9_PWM_EVT, (IEN | M0)}, /* TIMER9_PWM_EVT */
+ {DSIPORTC_TE0, (IEN | M0)}, /* DSIPORTC_TE0 */
+ {DSIPORTC_LANE0X, (IEN | M0)}, /* DSIPORTC_LANE0X */
+ {DSIPORTC_LANE0Y, (IEN | M0)}, /* DSIPORTC_LANE0Y */
+ {DSIPORTC_LANE1X, (IEN | M0)}, /* DSIPORTC_LANE1X */
+ {DSIPORTC_LANE1Y, (IEN | M0)}, /* DSIPORTC_LANE1Y */
+ {DSIPORTC_LANE2X, (IEN | M0)}, /* DSIPORTC_LANE2X */
+ {DSIPORTC_LANE2Y, (IEN | M0)}, /* DSIPORTC_LANE2Y */
+ {DSIPORTC_LANE3X, (IEN | M0)}, /* DSIPORTC_LANE3X */
+ {DSIPORTC_LANE3Y, (IEN | M0)}, /* DSIPORTC_LANE3Y */
+ {DSIPORTC_LANE4X, (IEN | M0)}, /* DSIPORTC_LANE4X */
+ {DSIPORTC_LANE4Y, (IEN | M0)}, /* DSIPORTC_LANE4Y */
+ {RFBI_HSYNC0, (M4)}, /* KBD_COL5 */
+ {RFBI_TE_VSYNC0, (PTD | M6)}, /* GPIO6_161 */
+ {RFBI_RE, (M4)}, /* KBD_COL4 */
+ {RFBI_A0, (PTD | IEN | M6)}, /* GPIO6_165 */
+ {RFBI_DATA8, (M4)}, /* KBD_COL3 */
+ {RFBI_DATA9, (PTD | M6)}, /* GPIO6_175 */
+ {RFBI_DATA10, (PTD | M6)}, /* GPIO6_176 */
+ {RFBI_DATA11, (PTD | M6)}, /* GPIO6_177 */
+ {RFBI_DATA12, (PTD | M6)}, /* GPIO6_178 */
+ {RFBI_DATA13, (PTU | IEN | M6)}, /* GPIO6_179 */
+ {RFBI_DATA14, (M4)}, /* KBD_COL7 */
+ {RFBI_DATA15, (M4)}, /* KBD_COL6 */
+ {GPIO6_182, (M6)}, /* GPIO6_182 */
+ {GPIO6_183, (PTD | M6)}, /* GPIO6_183 */
+ {GPIO6_184, (M4)}, /* KBD_COL2 */
+ {GPIO6_185, (PTD | IEN | M6)}, /* GPIO6_185 */
+ {GPIO6_186, (PTD | M6)}, /* GPIO6_186 */
+ {GPIO6_187, (PTU | IEN | M4)}, /* KBD_ROW2 */
+ {RFBI_DATA0, (PTD | M6)}, /* GPIO6_166 */
+ {RFBI_DATA1, (PTD | M6)}, /* GPIO6_167 */
+ {RFBI_DATA2, (PTD | M6)}, /* GPIO6_168 */
+ {RFBI_DATA3, (PTD | IEN | M6)}, /* GPIO6_169 */
+ {RFBI_DATA4, (IEN | M6)}, /* GPIO6_170 */
+ {RFBI_DATA5, (IEN | M6)}, /* GPIO6_171 */
+ {RFBI_DATA6, (PTD | M6)}, /* GPIO6_172 */
+ {RFBI_DATA7, (PTD | M6)}, /* GPIO6_173 */
+ {RFBI_CS0, (PTD | IEN | M6)}, /* GPIO6_163 */
+ {RFBI_WE, (PTD | M6)}, /* GPIO6_162 */
+ {MCSPI2_CS0, (M0)}, /* MCSPI2_CS0 */
+ {MCSPI2_CLK, (IEN | M0)}, /* MCSPI2_CLK */
+ {MCSPI2_SIMO, (IEN | M0)}, /* MCSPI2_SIMO*/
+ {MCSPI2_SOMI, (PTU | IEN | M0)}, /* MCSPI2_SOMI*/
+ {I2C4_SCL, (IEN | M0)}, /* I2C4_SCL */
+ {I2C4_SDA, (IEN | M0)}, /* I2C4_SDA */
+ {HDMI_CEC, (IEN | M0)}, /* HDMI_CEC */
+ {HDMI_HPD, (PTD | IEN | M0)}, /* HDMI_HPD */
+ {HDMI_DDC_SCL, (IEN | M0)}, /* HDMI_DDC_SCL */
+ {HDMI_DDC_SDA, (IEN | M0)}, /* HDMI_DDC_SDA */
+ {CSIPORTA_LANE0X, (IEN | M0)}, /* CSIPORTA_LANE0X */
+ {CSIPORTA_LANE0Y, (IEN | M0)}, /* CSIPORTA_LANE0Y */
+ {CSIPORTA_LANE1Y, (IEN | M0)}, /* CSIPORTA_LANE1Y */
+ {CSIPORTA_LANE1X, (IEN | M0)}, /* CSIPORTA_LANE1X */
+ {CSIPORTA_LANE2Y, (IEN | M0)}, /* CSIPORTA_LANE2Y */
+ {CSIPORTA_LANE2X, (IEN | M0)}, /* CSIPORTA_LANE2X */
+ {CSIPORTA_LANE3X, (IEN | M0)}, /* CSIPORTA_LANE3X */
+ {CSIPORTA_LANE3Y, (IEN | M0)}, /* CSIPORTA_LANE3Y */
+ {CSIPORTA_LANE4X, (IEN | M0)}, /* CSIPORTA_LANE4X */
+ {CSIPORTA_LANE4Y, (IEN | M0)}, /* CSIPORTA_LANE4Y */
+ {CSIPORTB_LANE0X, (IEN | M0)}, /* CSIPORTB_LANE0X */
+ {CSIPORTB_LANE0Y, (IEN | M0)}, /* CSIPORTB_LANE0Y */
+ {CSIPORTB_LANE1Y, (IEN | M0)}, /* CSIPORTB_LANE1Y */
+ {CSIPORTB_LANE1X, (IEN | M0)}, /* CSIPORTB_LANE1X */
+ {CSIPORTB_LANE2Y, (IEN | M0)}, /* CSIPORTB_LANE2Y */
+ {CSIPORTB_LANE2X, (IEN | M0)}, /* CSIPORTB_LANE2X */
+ {CSIPORTC_LANE0Y, (IEN | M0)}, /* CSIPORTC_LANE0Y */
+ {CSIPORTC_LANE0X, (IEN | M0)}, /* CSIPORTC_LANE0X */
+ {CSIPORTC_LANE1Y, (IEN | M0)}, /* CSIPORTC_LANE1Y */
+ {CSIPORTC_LANE1X, (IEN | M0)}, /* CSIPORTC_LANE1X */
+ {CAM_SHUTTER, (M0)}, /* CAM_SHUTTER */
+ {CAM_STROBE, (M0)}, /* CAM_STROBE */
+ {CAM_GLOBALRESET, (IEN | M0)}, /* CAM_GLOBALRESET */
+ {TIMER11_PWM_EVT, (PTD | M6)}, /* GPIO8_227 */
+ {TIMER5_PWM_EVT, (PTD | M6)}, /* GPIO8_228 */
+ {TIMER6_PWM_EVT, (PTD | M6)}, /* GPIO8_229 */
+ {TIMER8_PWM_EVT, (PTU | M6)}, /* GPIO8_230 */
+ {I2C3_SCL, (IEN | M0)}, /* I2C3_SCL */
+ {I2C3_SDA, (IEN | M0)}, /* I2C3_SDA */
+ {GPIO8_233, (IEN | M2)}, /* TIMER8_PWM_EVT */
+ {ABE_CLKS, (IEN | M0)}, /* ABE_CLKS */
+ {ABEDMIC_DIN1, (IEN | M0)}, /* ABEDMIC_DIN1 */
+ {ABEDMIC_DIN2, (IEN | M0)}, /* ABEDMIC_DIN2 */
+ {ABEDMIC_DIN3, (IEN | M0)}, /* ABEDMIC_DIN3 */
+ {ABEDMIC_CLK1, (M0)}, /* ABEDMIC_CLK1 */
+ {ABEDMIC_CLK2, (IEN | M1)}, /* ABEMCBSP1_FSX */
+ {ABEDMIC_CLK3, (M1)}, /* ABEMCBSP1_DX */
+ {ABESLIMBUS1_CLOCK, (IEN | M1)}, /* ABEMCBSP1_CLKX */
+ {ABESLIMBUS1_DATA, (IEN | M1)}, /* ABEMCBSP1_DR */
+ {ABEMCBSP2_DR, (IEN | M0)}, /* ABEMCBSP2_DR */
+ {ABEMCBSP2_DX, (M0)}, /* ABEMCBSP2_DX */
+ {ABEMCBSP2_FSX, (IEN | M0)}, /* ABEMCBSP2_FSX */
+ {ABEMCBSP2_CLKX, (IEN | M0)}, /* ABEMCBSP2_CLKX */
+ {ABEMCPDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* ABEMCPDM_UL_DATA */
+ {ABEMCPDM_DL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* ABEMCPDM_DL_DATA */
+ {ABEMCPDM_FRAME, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* ABEMCPDM_FRAME */
+ {ABEMCPDM_LB_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* ABEMCPDM_LB_CLK */
+ {WLSDIO_CLK, (PTU | IEN | M0)}, /* WLSDIO_CLK */
+ {WLSDIO_CMD, (PTU | IEN | M0)}, /* WLSDIO_CMD */
+ {WLSDIO_DATA0, (PTU | IEN | M0)}, /* WLSDIO_DATA0*/
+ {WLSDIO_DATA1, (PTU | IEN | M0)}, /* WLSDIO_DATA1*/
+ {WLSDIO_DATA2, (PTU | IEN | M0)}, /* WLSDIO_DATA2*/
+ {WLSDIO_DATA3, (PTU | IEN | M0)}, /* WLSDIO_DATA3*/
+ {UART5_RX, (PTU | IEN | M0)}, /* UART5_RX */
+ {UART5_TX, (M0)}, /* UART5_TX */
+ {UART5_CTS, (PTU | IEN | M0)}, /* UART5_CTS */
+ {UART5_RTS, (M0)}, /* UART5_RTS */
+ {I2C2_SCL, (IEN | M0)}, /* I2C2_SCL */
+ {I2C2_SDA, (IEN | M0)}, /* I2C2_SDA */
+ {MCSPI1_CLK, (M6)}, /* GPIO5_140 */
+ {MCSPI1_SOMI, (IEN | M6)}, /* GPIO5_141 */
+ {MCSPI1_SIMO, (PTD | M6)}, /* GPIO5_142 */
+ {MCSPI1_CS0, (PTD | M6)}, /* GPIO5_143 */
+ {MCSPI1_CS1, (PTD | IEN | M6)}, /* GPIO5_144 */
+ {I2C5_SCL, (IEN | M0)}, /* I2C5_SCL */
+ {I2C5_SDA, (IEN | M0)}, /* I2C5_SDA */
+ {PERSLIMBUS2_CLOCK, (PTD | M6)}, /* GPIO5_145 */
+ {PERSLIMBUS2_DATA, (PTD | IEN | M6)}, /* GPIO5_146 */
+ {UART6_TX, (PTU | IEN | M6)}, /* GPIO5_149 */
+ {UART6_RX, (PTU | IEN | M6)}, /* GPIO5_150 */
+ {UART6_CTS, (PTU | IEN | M6)}, /* GPIO5_151 */
+ {UART6_RTS, (PTU | M0)}, /* UART6_RTS */
+ {UART3_CTS_RCTX, (PTU | IEN | M6)}, /* GPIO5_153 */
+ {UART3_RTS_IRSD, (PTU | IEN | M1)}, /* HDQ_SIO */
+ {USBB3_HSIC_STROBE, (PTU | IEN | M0)}, /* USBB3_HSIC_STROBE*/
+ {USBB3_HSIC_DATA, (PTU | IEN | M0)}, /* USBB3_HSIC_DATA */
+ {USBD0_HS_DP, (IEN | M0)}, /* USBD0_HS_DP */
+ {USBD0_HS_DM, (IEN | M0)}, /* USBD0_HS_DM */
+ {USBD0_SS_RX, (IEN | M0)}, /* USBD0_SS_RX */
+ {I2C1_PMIC_SCL, (PTU | IEN | M0)}, /* I2C1_PMIC_SCL */
+ {I2C1_PMIC_SDA, (PTU | IEN | M0)}, /* I2C1_PMIC_SDA */
+
};
const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
- {PAD0_SIM_IO, (IEN | M0)}, /* sim_io */
- {PAD1_SIM_CLK, (M0)}, /* sim_clk */
- {PAD0_SIM_RESET, (M0)}, /* sim_reset */
- {PAD1_SIM_CD, (PTU | IEN | M0)}, /* sim_cd */
- {PAD0_SIM_PWRCTRL, (M0)}, /* sim_pwrctrl */
- {PAD1_FREF_XTAL_IN, (M0)}, /* # */
- {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */
- {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */
- {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
- {PAD1_FREF_CLK3_REQ, (PTU | IEN | M0)}, /* # */
- {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
- {PAD1_FREF_CLK4_REQ, (PTU | IEN | M0)}, /* # */
- {PAD0_FREF_CLK4_OUT, (M0)}, /* # */
- {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */
- {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */
- {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */
- {PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */
- {PAD0_SYS_BOOT6, (IEN | M3)}, /* gpio_wk9 */
- {PAD1_SYS_BOOT7, (IEN | M3)}, /* gpio_wk10 */
- {PAD1_FREF_CLK3_REQ, (M3)}, /* gpio_wk30 */
- {PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7 */
- {PAD0_FREF_CLK4_OUT, (M3)}, /* gpio_wk8 */
+
+/*
+ * This pad keeps C2C Module always enabled.
+ * Putting this in safe mode do not cause the issue.
+ * C2C driver could enable this mux setting if needed.
+ */
+ {LLIA_WAKEREQIN, (M7)}, /* SAFE MODE */
+ {LLIB_WAKEREQIN, (M7)}, /* SAFE MODE */
+ {DRM_EMU0, (PTU | IEN | M0)}, /* DRM_EMU0 */
+ {DRM_EMU1, (PTU | IEN | M0)}, /* DRM_EMU1 */
+ {JTAG_NTRST, (IEN | M0)}, /* JTAG_NTRST */
+ {JTAG_TCK, (IEN | M0)}, /* JTAG_TCK */
+ {JTAG_RTCK, (M0)}, /* JTAG_RTCK */
+ {JTAG_TMSC, (IEN | M0)}, /* JTAG_TMSC */
+ {JTAG_TDI, (IEN | M0)}, /* JTAG_TDI */
+ {JTAG_TDO, (M0)}, /* JTAG_TDO */
+ {FREF_CLK_IOREQ, (IEN | M0)}, /* FREF_CLK_IOREQ */
+ {FREF_CLK0_OUT, (M0)}, /* FREF_CLK0_OUT */
+ {FREF_CLK1_OUT, (M0)}, /* FREF_CLK1_OUT */
+ {FREF_CLK2_OUT, (M0)}, /* FREF_CLK2_OUT */
+ {FREF_CLK2_REQ, (PTU | IEN | M6)}, /* GPIO1_WK9 */
+ {FREF_CLK1_REQ, (PTD | IEN | M6)}, /* GPIO1_WK8 */
+ {SYS_NRESPWRON, (IEN | M0)}, /* SYS_NRESPWRON */
+ {SYS_NRESWARM, (PTU | IEN | M0)}, /* SYS_NRESWARM */
+ {SYS_PWR_REQ, (M0)}, /* SYS_PWR_REQ */
+ {SYS_NIRQ1, (PTU | IEN | M0)}, /* SYS_NIRQ1 */
+ {SYS_NIRQ2, (PTU | IEN | M0)}, /* SYS_NIRQ2 */
+ {SYS_BOOT0, (IEN | M0)}, /* SYS_BOOT0 */
+ {SYS_BOOT1, (IEN | M0)}, /* SYS_BOOT1 */
+ {SYS_BOOT2, (IEN | M0)}, /* SYS_BOOT2 */
+ {SYS_BOOT3, (IEN | M0)}, /* SYS_BOOT3 */
+ {SYS_BOOT4, (IEN | M0)}, /* SYS_BOOT4 */
+ {SYS_BOOT5, (IEN | M0)}, /* SYS_BOOT5 */
+
};
#endif /* _EVM4430_MUX_DATA_H */
diff --git a/board/ti/omap730p2/omap730p2.c b/board/ti/omap730p2/omap730p2.c
index 954ced5..36204b2 100644
--- a/board/ti/omap730p2/omap730p2.c
+++ b/board/ti/omap730p2/omap730p2.c
@@ -129,12 +129,6 @@ int board_init (void)
return 0;
}
-int misc_init_r (void)
-{
- /* currently empty */
- return (0);
-}
-
/******************************
Routine:
Description:
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index ca4b8b3..ee82771 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -179,7 +179,7 @@ void set_muxconf_regs_non_essential(void)
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0);
+ omap_mmc_init(0, 0, 0);
return 0;
}
#endif
diff --git a/board/ti/panda/panda_mux_data.h b/board/ti/panda/panda_mux_data.h
index 5b66a14..dc8b388 100644
--- a/board/ti/panda/panda_mux_data.h
+++ b/board/ti/panda/panda_mux_data.h
@@ -76,7 +76,7 @@ const struct pad_conf_entry wkup_padconf_array_essential[] = {
const struct pad_conf_entry wkup_padconf_array_essential_4460[] = {
-{PAD1_FREF_CLK4_REQ, (PTU | M7)}, /* gpio_wk7 for TPS: safe mode + pull up */
+{PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7 for TPS: Mode 3 */
};
@@ -168,10 +168,10 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = {
{ABE_DMIC_DIN1, (IEN | M0)}, /* abe_dmic_din1 */
{ABE_DMIC_DIN2, (PTU | IEN | M3)}, /* gpio_121 */
{ABE_DMIC_DIN3, (IEN | M0)}, /* abe_dmic_din3 */
- {UART2_CTS, (PTU | IEN | M0)}, /* uart2_cts */
- {UART2_RTS, (M0)}, /* uart2_rts */
- {UART2_RX, (PTU | IEN | M0)}, /* uart2_rx */
- {UART2_TX, (M0)}, /* uart2_tx */
+ {UART2_CTS, (PTU | IEN | M7)}, /* uart2_cts */
+ {UART2_RTS, (M7)}, /* uart2_rts */
+ {UART2_RX, (PTU | IEN | M7)}, /* uart2_rx */
+ {UART2_TX, (M7)}, /* uart2_tx */
{HDQ_SIO, (M3)}, /* gpio_127 */
{MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_clk */
{MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_somi */
diff --git a/board/ti/sdp3430/sdp.c b/board/ti/sdp3430/sdp.c
index d73f501..9a1c012 100644
--- a/board/ti/sdp3430/sdp.c
+++ b/board/ti/sdp3430/sdp.c
@@ -209,7 +209,7 @@ void set_muxconf_regs(void)
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0);
+ omap_mmc_init(0, 0, 0);
return 0;
}
#endif
diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c
index 9ae9e2c..982c771 100644
--- a/board/ti/sdp4430/sdp.c
+++ b/board/ti/sdp4430/sdp.c
@@ -108,8 +108,8 @@ void set_muxconf_regs_non_essential(void)
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_GENERIC_MMC)
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0);
- omap_mmc_init(1);
+ omap_mmc_init(0, 0, 0);
+ omap_mmc_init(1, 0, 0);
return 0;
}
#endif
diff --git a/board/ti/sdp4430/sdp4430_mux_data.h b/board/ti/sdp4430/sdp4430_mux_data.h
index 0a20968..6140b99 100644
--- a/board/ti/sdp4430/sdp4430_mux_data.h
+++ b/board/ti/sdp4430/sdp4430_mux_data.h
@@ -67,7 +67,7 @@ const struct pad_conf_entry wkup_padconf_array_essential[] = {
const struct pad_conf_entry wkup_padconf_array_essential_4460[] = {
-{PAD1_FREF_CLK4_REQ, (PTU | M7)}, /* gpio_wk7 for TPS: safe mode + pull up */
+{PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7 for TPS: Mode 3 */
};
diff --git a/board/timll/devkit3250/Makefile b/board/timll/devkit3250/Makefile
new file mode 100644
index 0000000..ea7827c
--- /dev/null
+++ b/board/timll/devkit3250/Makefile
@@ -0,0 +1,44 @@
+#
+# Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
+# Copyright (C) 2008, Guennadi Liakhovetski <lg@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+# MA 02110-1301, USA.
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).o
+
+COBJS := devkit3250.o
+
+SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS := $(addprefix $(obj),$(COBJS))
+SOBJS := $(addprefix $(obj),$(SOBJS))
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(call cmd_link_o_target, $(OBJS) $(SOBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/timll/devkit3250/devkit3250.c b/board/timll/devkit3250/devkit3250.c
new file mode 100644
index 0000000..6b0ec80
--- /dev/null
+++ b/board/timll/devkit3250/devkit3250.c
@@ -0,0 +1,65 @@
+/*
+ * Embest/Timll DevKit3250 board support
+ *
+ * Copyright (C) 2011 Vladimir Zapolskiy <vz@mleia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/emc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct emc_regs *emc = (struct emc_regs *)EMC_BASE;
+
+int board_early_init_f(void)
+{
+ lpc32xx_uart_init(CONFIG_SYS_LPC32XX_UART);
+
+ return 0;
+}
+
+int board_init(void)
+{
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+
+#ifdef CONFIG_SYS_FLASH_CFI
+ /* Use 16-bit memory interface for NOR Flash */
+ emc->stat[0].config = EMC_STAT_CONFIG_PB | EMC_STAT_CONFIG_16BIT;
+
+ /* Change the NOR timings to optimum value to get maximum bandwidth */
+ emc->stat[0].waitwen = EMC_STAT_WAITWEN(1);
+ emc->stat[0].waitoen = EMC_STAT_WAITOEN(1);
+ emc->stat[0].waitrd = EMC_STAT_WAITRD(12);
+ emc->stat[0].waitpage = EMC_STAT_WAITPAGE(12);
+ emc->stat[0].waitwr = EMC_STAT_WAITWR(5);
+ emc->stat[0].waitturn = EMC_STAT_WAITTURN(2);
+#endif
+
+ return 0;
+}
+
+int dram_init(void)
+{
+ gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
+ CONFIG_SYS_SDRAM_SIZE);
+
+ return 0;
+}
diff --git a/board/timll/devkit8000/devkit8000.c b/board/timll/devkit8000/devkit8000.c
index d75e86b..35f5e15 100644
--- a/board/timll/devkit8000/devkit8000.c
+++ b/board/timll/devkit8000/devkit8000.c
@@ -136,7 +136,7 @@ void set_muxconf_regs(void)
#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
int board_mmc_init(bd_t *bis)
{
- omap_mmc_init(0);
+ omap_mmc_init(0, 0, 0);
return 0;
}
#endif