diff options
Diffstat (limited to 'board')
-rw-r--r-- | board/amcc/bamboo/bamboo.c | 2 | ||||
-rw-r--r-- | board/amcc/bamboo/bamboo.h | 11 | ||||
-rw-r--r-- | board/amcc/bamboo/flash.c | 2 | ||||
-rw-r--r-- | board/amcc/sequoia/sequoia.c | 4 | ||||
-rw-r--r-- | board/esd/du440/du440.c | 4 | ||||
-rw-r--r-- | board/esd/pci405/pci405.c | 1 | ||||
-rw-r--r-- | board/esd/pmc440/pmc440.c | 4 | ||||
-rw-r--r-- | board/korat/korat.c | 4 | ||||
-rw-r--r-- | board/lwmon5/lwmon5.c | 8 | ||||
-rw-r--r-- | board/netstal/hcu5/hcu5.c | 24 |
10 files changed, 26 insertions, 38 deletions
diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c index 41957c9..d4205e0 100644 --- a/board/amcc/bamboo/bamboo.c +++ b/board/amcc/bamboo/bamboo.c @@ -554,7 +554,7 @@ void ext_bus_cntlr_init(void) | +-------------------------------------------------------------------------*/ /* Read Pin Strap Register in PPC440EP */ - mfsdr(sdr_pstrp0, sdr0_pstrp0); + mfsdr(SDR0_PINSTP, sdr0_pstrp0); bootstrap_settings = sdr0_pstrp0 & SDR0_PSTRP0_BOOTSTRAP_MASK; /*-------------------------------------------------------------------------+ diff --git a/board/amcc/bamboo/bamboo.h b/board/amcc/bamboo/bamboo.h index 4474862..f2b78a9 100644 --- a/board/amcc/bamboo/bamboo.h +++ b/board/amcc/bamboo/bamboo.h @@ -110,17 +110,6 @@ /*----------------------------------------------------------------------------+ | SDR Configuration registers +----------------------------------------------------------------------------*/ -/* Serial Device Strap Reg 0 */ -#define SDR0_SDSTP0 0x0020 -/* Serial Device Strap Reg 1 */ -#define SDR0_SDSTP1 0x0021 -/* Serial Device Strap Reg 2 */ -#define SDR0_SDSTP2 SDR0_STRP2 -/* Serial Device Strap Reg 3 */ -#define SDR0_SDSTP3 SDR0_STRP3 - -#define sdr_pstrp0 0x0040 - #define SDR0_SDSTP1_EBC_ROM_BS_MASK 0x00006000 /* EBC Boot Size Mask */ #define SDR0_SDSTP1_EBC_ROM_BS_32BIT 0x00004000 /* EBC 32 bits */ #define SDR0_SDSTP1_EBC_ROM_BS_16BIT 0x00002000 /* EBC 16 Bits */ diff --git a/board/amcc/bamboo/flash.c b/board/amcc/bamboo/flash.c index 406342f..07d185f 100644 --- a/board/amcc/bamboo/flash.c +++ b/board/amcc/bamboo/flash.c @@ -86,7 +86,7 @@ unsigned long flash_init(void) unsigned long ebc_boot_size; unsigned long boot_selection; - mfsdr(sdr_pstrp0, val); + mfsdr(SDR0_PINSTP, val); index = (val & SDR0_PSTRP0_BOOTSTRAP_MASK) >> 29; if ((index == 5) || (index == 7)) { diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index 4338e6b..c523bca 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -321,8 +321,8 @@ int misc_init_r(void) * This fix will make the MAL burst disabling patch for the Linux * EMAC driver obsolete. */ - reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP; - mtdcr(PLB4_ACR, reg); + reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK; + mtdcr(PLB4A0_ACR, reg); return 0; } diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c index fccfaee..426321e 100644 --- a/board/esd/du440/du440.c +++ b/board/esd/du440/du440.c @@ -265,8 +265,8 @@ int misc_init_r(void) * This fix will make the MAL burst disabling patch for the Linux * EMAC driver obsolete. */ - reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP; - mtdcr(PLB4_ACR, reg); + reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK; + mtdcr(PLB4A0_ACR, reg); /* * release IO-RST# diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c index dd97c7a..4018a7d 100644 --- a/board/esd/pci405/pci405.c +++ b/board/esd/pci405/pci405.c @@ -281,7 +281,6 @@ int misc_init_r (void) #define PCI0_BRDGOPT1 0x4a pci_write_config_word(PCIDEVID_405GP, PCI0_BRDGOPT1, 0x3f20); -#define PLB0_ACR 0x87 /* * Enable fairness and high bus utilization */ diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index c907b85..8238c33 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -426,8 +426,8 @@ int misc_init_r(void) * This fix will make the MAL burst disabling patch for the Linux * EMAC driver obsolete. */ - reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP; - mtdcr(PLB4_ACR, reg); + reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK; + mtdcr(PLB4A0_ACR, reg); #ifdef CONFIG_FPGA pmc440_init_fpga(); diff --git a/board/korat/korat.c b/board/korat/korat.c index afa36d6..4f0513a 100644 --- a/board/korat/korat.c +++ b/board/korat/korat.c @@ -553,8 +553,8 @@ int misc_init_r(void) * This fix will make the MAL burst disabling patch for the Linux * EMAC driver obsolete. */ - reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP; - mtdcr(PLB4_ACR, reg); + reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK; + mtdcr(PLB4A0_ACR, reg); set_serial_number(); set_mac_addresses(); diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index 0c6f4e5..9622b70 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -38,8 +38,8 @@ int board_early_init_f(void) u32 reg; /* PLB Write pipelining disabled. Denali Core workaround */ - mtdcr(PLB0_ACR, 0xDE000000); - mtdcr(PLB1_ACR, 0xDE000000); + mtdcr(PLB4A0_ACR, 0xDE000000); + mtdcr(PLB4A1_ACR, 0xDE000000); /*-------------------------------------------------------------------- * Setup the interrupt controller polarities, triggers, etc. @@ -249,8 +249,8 @@ int misc_init_r(void) * This fix will make the MAL burst disabling patch for the Linux * EMAC driver obsolete. */ - reg = mfdcr(PLB4_ACR) & ~PLB4_ACR_WRP; - mtdcr(PLB4_ACR, reg); + reg = mfdcr(PLB4A0_ACR) & ~PLB4Ax_ACR_WRP_MASK; + mtdcr(PLB4A0_ACR, reg); /* * Init matrix keyboard diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c index b15f99e..f94d05b 100644 --- a/board/netstal/hcu5/hcu5.c +++ b/board/netstal/hcu5/hcu5.c @@ -327,7 +327,7 @@ int board_with_pci(void) u32 reg; mfsdr(SDR0_PCI0, reg); - return (reg & SDR0_XCR_PAE_MASK); + return (reg & SDR0_PCI0_PAE_MASK); } /* @@ -352,28 +352,28 @@ int pci_pre_init(struct pci_controller *hose) * Set priority for all PLB3 devices to 0. * Set PLB3 arbiter to fair mode. */ - mfsdr(SD0_AMP1, addr); - mtsdr(SD0_AMP1, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB3_ACR); - mtdcr(PLB3_ACR, addr | 0x80000000); /* Sequoia */ + mfsdr(SDR0_AMP1, addr); + mtsdr(SDR0_AMP1, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(PLB3A0_ACR); + mtdcr(PLB3A0_ACR, addr | 0x80000000); /* Sequoia */ /* * Set priority for all PLB4 devices to 0. */ - mfsdr(SD0_AMP0, addr); - mtsdr(SD0_AMP0, (addr & 0x000000FF) | 0x0000FF00); - addr = mfdcr(PLB4_ACR) | 0xa0000000; /* Was 0x8---- */ - mtdcr(PLB4_ACR, addr); /* Sequoia */ + mfsdr(SDR0_AMP0, addr); + mtsdr(SDR0_AMP0, (addr & 0x000000FF) | 0x0000FF00); + addr = mfdcr(PLB4A0_ACR) | 0xa0000000; /* Was 0x8---- */ + mtdcr(PLB4A0_ACR, addr); /* Sequoia */ /* * As of errata version 0.4, CHIP_8: Incorrect Write to DDR SDRAM. * Workaround: Disable write pipelining to DDR SDRAM by setting - * PLB0_ACR[WRP] = 0. + * PLB4A0_ACR[WRP] = 0. */ - mtdcr(PLB0_ACR, 0); /* PATCH HAB: WRITE PIPELINING OFF */ + mtdcr(PLB4A0_ACR, 0); /* PATCH HAB: WRITE PIPELINING OFF */ /* Segment1 */ - mtdcr(PLB1_ACR, 0); /* PATCH HAB: WRITE PIPELINING OFF */ + mtdcr(PLB4A1_ACR, 0); /* PATCH HAB: WRITE PIPELINING OFF */ return board_with_pci(); } |