diff options
Diffstat (limited to 'board/xaeniax')
-rw-r--r-- | board/xaeniax/flash.c | 18 | ||||
-rw-r--r-- | board/xaeniax/lowlevel_init.S | 66 |
2 files changed, 42 insertions, 42 deletions
diff --git a/board/xaeniax/flash.c b/board/xaeniax/flash.c index cd257df..b051c89 100644 --- a/board/xaeniax/flash.c +++ b/board/xaeniax/flash.c @@ -28,7 +28,7 @@ #include <linux/byteorder/swab.h> -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ /* Board support for 1 or 2 flash devices */ #define FLASH_PORT_WIDTH32 @@ -65,7 +65,7 @@ unsigned long flash_init (void) int i; ulong size = 0; - for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) { + for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { switch (i) { case 0: flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]); @@ -85,8 +85,8 @@ unsigned long flash_init (void) /* Protect monitor and environment sectors */ flash_protect ( FLAG_PROTECT_SET, - CFG_FLASH_BASE, - CFG_FLASH_BASE + monitor_flash_len - 1, + CONFIG_SYS_FLASH_BASE, + CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1, &flash_info[0] ); flash_protect ( FLAG_PROTECT_SET, @@ -203,10 +203,10 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info) break; } - if (info->sector_count > CFG_MAX_FLASH_SECT) { + if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) { printf ("** ERROR: sector count %d > max (%d) **\n", - info->sector_count, CFG_MAX_FLASH_SECT); - info->sector_count = CFG_MAX_FLASH_SECT; + info->sector_count, CONFIG_SYS_MAX_FLASH_SECT); + info->sector_count = CONFIG_SYS_MAX_FLASH_SECT; } addr[0] = (FPW) 0x00FF00FF; /* restore read mode */ @@ -276,7 +276,7 @@ int flash_erase (flash_info_t *info, int s_first, int s_last) *addr = (FPW) 0x00D000D0; /* erase confirm */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) { + if (get_timer_masked () > CONFIG_SYS_FLASH_ERASE_TOUT) { printf ("Timeout\n"); *addr = (FPW) 0x00B000B0; /* suspend erase */ *addr = (FPW) 0x00FF00FF; /* reset to read mode */ @@ -410,7 +410,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data) /* wait while polling the status register */ while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) { - if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) { + if (get_timer_masked () > CONFIG_SYS_FLASH_WRITE_TOUT) { *addr = (FPW) 0x00FF00FF; /* restore read mode */ return (1); } diff --git a/board/xaeniax/lowlevel_init.S b/board/xaeniax/lowlevel_init.S index fe3e712..57e1620 100644 --- a/board/xaeniax/lowlevel_init.S +++ b/board/xaeniax/lowlevel_init.S @@ -29,7 +29,7 @@ #include <version.h> #include <asm/arch/pxa-regs.h> -DRAM_SIZE: .long CFG_DRAM_SIZE +DRAM_SIZE: .long CONFIG_SYS_DRAM_SIZE /* wait for coprocessor write complete */ .macro CPWAIT reg @@ -47,67 +47,67 @@ lowlevel_init: /* Set up GPIO pins first ----------------------------------------- */ ldr r0,=GPSR0 - ldr r1,=CFG_GPSR0_VAL + ldr r1,=CONFIG_SYS_GPSR0_VAL str r1,[r0] ldr r0,=GPSR1 - ldr r1,=CFG_GPSR1_VAL + ldr r1,=CONFIG_SYS_GPSR1_VAL str r1,[r0] ldr r0,=GPSR2 - ldr r1,=CFG_GPSR2_VAL + ldr r1,=CONFIG_SYS_GPSR2_VAL str r1,[r0] ldr r0,=GPCR0 - ldr r1,=CFG_GPCR0_VAL + ldr r1,=CONFIG_SYS_GPCR0_VAL str r1,[r0] ldr r0,=GPCR1 - ldr r1,=CFG_GPCR1_VAL + ldr r1,=CONFIG_SYS_GPCR1_VAL str r1,[r0] ldr r0,=GPCR2 - ldr r1,=CFG_GPCR2_VAL + ldr r1,=CONFIG_SYS_GPCR2_VAL str r1,[r0] ldr r0,=GPDR0 - ldr r1,=CFG_GPDR0_VAL + ldr r1,=CONFIG_SYS_GPDR0_VAL str r1,[r0] ldr r0,=GPDR1 - ldr r1,=CFG_GPDR1_VAL + ldr r1,=CONFIG_SYS_GPDR1_VAL str r1,[r0] ldr r0,=GPDR2 - ldr r1,=CFG_GPDR2_VAL + ldr r1,=CONFIG_SYS_GPDR2_VAL str r1,[r0] ldr r0,=GAFR0_L - ldr r1,=CFG_GAFR0_L_VAL + ldr r1,=CONFIG_SYS_GAFR0_L_VAL str r1,[r0] ldr r0,=GAFR0_U - ldr r1,=CFG_GAFR0_U_VAL + ldr r1,=CONFIG_SYS_GAFR0_U_VAL str r1,[r0] ldr r0,=GAFR1_L - ldr r1,=CFG_GAFR1_L_VAL + ldr r1,=CONFIG_SYS_GAFR1_L_VAL str r1,[r0] ldr r0,=GAFR1_U - ldr r1,=CFG_GAFR1_U_VAL + ldr r1,=CONFIG_SYS_GAFR1_U_VAL str r1,[r0] ldr r0,=GAFR2_L - ldr r1,=CFG_GAFR2_L_VAL + ldr r1,=CONFIG_SYS_GAFR2_L_VAL str r1,[r0] ldr r0,=GAFR2_U - ldr r1,=CFG_GAFR2_U_VAL + ldr r1,=CONFIG_SYS_GAFR2_U_VAL str r1,[r0] ldr r0,=PSSR /* enable GPIO pins */ - ldr r1,=CFG_PSSR_VAL + ldr r1,=CONFIG_SYS_PSSR_VAL str r1,[r0] /* ---------------------------------------------------------------- */ @@ -145,17 +145,17 @@ mem_init: /* MSC registers: timing, bus width, mem type */ /* MSC0: nCS(0,1) */ - ldr r2,=CFG_MSC0_VAL + ldr r2,=CONFIG_SYS_MSC0_VAL str r2,[r1, #MSC0_OFFSET] ldr r2,[r1, #MSC0_OFFSET] /* read back to ensure data latches */ /* MSC1: nCS(2,3) */ - ldr r2,=CFG_MSC1_VAL + ldr r2,=CONFIG_SYS_MSC1_VAL str r2,[r1, #MSC1_OFFSET] ldr r2,[r1, #MSC1_OFFSET] /* MSC2: nCS(4,5) */ - ldr r2,=CFG_MSC2_VAL + ldr r2,=CONFIG_SYS_MSC2_VAL str r2,[r1, #MSC2_OFFSET] ldr r2,[r1, #MSC2_OFFSET] @@ -164,37 +164,37 @@ mem_init: /* ---------------------------------------------------------------- */ /* MECR: Memory Expansion Card Register */ - ldr r2,=CFG_MECR_VAL + ldr r2,=CONFIG_SYS_MECR_VAL str r2,[r1, #MECR_OFFSET] ldr r2,[r1, #MECR_OFFSET] /* MCMEM0: Card Interface slot 0 timing */ - ldr r2,=CFG_MCMEM0_VAL + ldr r2,=CONFIG_SYS_MCMEM0_VAL str r2,[r1, #MCMEM0_OFFSET] ldr r2,[r1, #MCMEM0_OFFSET] /* MCMEM1: Card Interface slot 1 timing */ - ldr r2,=CFG_MCMEM1_VAL + ldr r2,=CONFIG_SYS_MCMEM1_VAL str r2,[r1, #MCMEM1_OFFSET] ldr r2,[r1, #MCMEM1_OFFSET] /* MCATT0: Card Interface Attribute Space Timing, slot 0 */ - ldr r2,=CFG_MCATT0_VAL + ldr r2,=CONFIG_SYS_MCATT0_VAL str r2,[r1, #MCATT0_OFFSET] ldr r2,[r1, #MCATT0_OFFSET] /* MCATT1: Card Interface Attribute Space Timing, slot 1 */ - ldr r2,=CFG_MCATT1_VAL + ldr r2,=CONFIG_SYS_MCATT1_VAL str r2,[r1, #MCATT1_OFFSET] ldr r2,[r1, #MCATT1_OFFSET] /* MCIO0: Card Interface I/O Space Timing, slot 0 */ - ldr r2,=CFG_MCIO0_VAL + ldr r2,=CONFIG_SYS_MCIO0_VAL str r2,[r1, #MCIO0_OFFSET] ldr r2,[r1, #MCIO0_OFFSET] /* MCIO1: Card Interface I/O Space Timing, slot 1 */ - ldr r2,=CFG_MCIO1_VAL + ldr r2,=CONFIG_SYS_MCIO1_VAL str r2,[r1, #MCIO1_OFFSET] ldr r2,[r1, #MCIO1_OFFSET] @@ -207,7 +207,7 @@ mem_init: /* ---------------------------------------------------------------- */ @ get the mdrefr settings - ldr r4,=CFG_MDREFR_VAL + ldr r4,=CONFIG_SYS_MDREFR_VAL @ write back mdrefr str r4,[r1, #MDREFR_OFFSET] @@ -261,7 +261,7 @@ mem_init: /* Step 4d: */ /* fetch platform value of mdcnfg */ @ - ldr r2, =CFG_MDCNFG_VAL + ldr r2, =CONFIG_SYS_MDCNFG_VAL @ disable all sdram banks @ @@ -296,7 +296,7 @@ mem_init: /* documented in SDRAM data sheets. The address(es) used */ /* for this purpose must not be cacheable. */ - ldr r3, =CFG_DRAM_BASE + ldr r3, =CONFIG_SYS_DRAM_BASE str r2, [r3] str r2, [r3] str r2, [r3] @@ -326,7 +326,7 @@ mem_init: /* Step 4h: Write MDMRS. */ - ldr r2, =CFG_MDMRS_VAL + ldr r2, =CONFIG_SYS_MDMRS_VAL str r2, [r1, #MDMRS_OFFSET] @@ -342,7 +342,7 @@ initirqs: ldr r2, =ICLR str r1, [r2] - ldr r1, =CFG_ICMR_VAL /* mask all interrupts at the controller */ + ldr r1, =CONFIG_SYS_ICMR_VAL /* mask all interrupts at the controller */ ldr r2, =ICMR str r1, [r2] @@ -388,7 +388,7 @@ initclks: @ test: ldr r1, =CKEN - ldr r2, =CFG_CKEN_VAL + ldr r2, =CONFIG_SYS_CKEN_VAL str r2, [r1] /* ---------------------------------------------------------------- */ |