diff options
Diffstat (limited to 'board/warp')
-rw-r--r-- | board/warp/README | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/board/warp/README b/board/warp/README index 22f9055..3cfd22e 100644 --- a/board/warp/README +++ b/board/warp/README @@ -1,4 +1,4 @@ -How to Update U-boot on Warp board +How to Update U-Boot on Warp board ---------------------------------- Required software on the host PC: @@ -7,13 +7,13 @@ Required software on the host PC: - dfu-util: http://dfu-util.sourceforge.net/releases/ -Build U-boot for Warp: +Build U-Boot for Warp: $ make mrproper $ make warp_config $ make -This will generate the U-boot binary called u-boot.imx. +This will generate the U-Boot binary called u-boot.imx. Put warp board in USB download mode @@ -29,7 +29,7 @@ Load u-boot.imx via USB: $ sudo ./imx_usb u-boot.imx -Then U-boot should start and its messages will appear in the console program. +Then U-Boot should start and its messages will appear in the console program. Use the default environment variables: @@ -43,7 +43,7 @@ Transfer u-boot.imx that will be flashed into the eMMC: $ sudo dfu-util -D u-boot.imx -a boot -Then on the U-boot prompt the following message should be seen after a +Then on the U-Boot prompt the following message should be seen after a successful upgrade: #DOWNLOAD ... OK @@ -53,4 +53,4 @@ Remove power from the warp board. Put warp board into normal boot mode -Power up the board and the new updated U-boot should boot from eMMC +Power up the board and the new updated U-Boot should boot from eMMC |