1 files changed, 119 insertions, 0 deletions
diff --git a/board/warp/warp.c b/board/warp/warp.c
new file mode 100644
index 0000000..21ac5e7
--- /dev/null
+++ b/board/warp/warp.c
@@ -0,0 +1,119 @@
+/*
+ * Copyright (C) 2014, 2015 O.S. Systems Software LTDA.
+ * Copyright (C) 2014 Kynetics LLC.
+ * Copyright (C) 2014 Revolution Robotics, Inc.
+ *
+ * Author: Otavio Salvador <otavio@ossystems.com.br>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <asm/arch/clock.h>
+#include <asm/arch/iomux.h>
+#include <asm/arch/imx-regs.h>
+#include <asm/arch/mx6-pins.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+#include <asm/imx-common/iomux-v3.h>
+#include <asm/io.h>
+#include <linux/sizes.h>
+#include <common.h>
+#include <watchdog.h>
+#include <fsl_esdhc.h>
+#include <mmc.h>
+#include <usb.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
+	PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
+	PAD_CTL_SRE_FAST  | PAD_CTL_HYS | \
+	PAD_CTL_LVE)
+
+#define USDHC_PAD_CTRL (PAD_CTL_PUS_22K_UP | \
+	PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
+	PAD_CTL_SRE_FAST  | PAD_CTL_HYS | \
+	PAD_CTL_LVE)
+
+int dram_init(void)
+{
+	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
+
+	return 0;
+}
+
+static void setup_iomux_uart(void)
+{
+	static iomux_v3_cfg_t const uart1_pads[] = {
+		MX6_PAD_UART1_TXD__UART1_TXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+		MX6_PAD_UART1_RXD__UART1_RXD | MUX_PAD_CTRL(UART_PAD_CTRL),
+	};
+
+	imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads));
+}
+
+static struct fsl_esdhc_cfg usdhc_cfg[1] = {
+	{USDHC2_BASE_ADDR},
+};
+
+int board_mmc_getcd(struct mmc *mmc)
+{
+	return 1;	/* Assume boot SD always present */
+}
+
+int board_mmc_init(bd_t *bis)
+{
+	static iomux_v3_cfg_t const usdhc2_pads[] = {
+		MX6_PAD_SD2_CLK__USDHC2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+		MX6_PAD_SD2_CMD__USDHC2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+		MX6_PAD_SD2_RST__USDHC2_RST | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+		MX6_PAD_SD2_DAT0__USDHC2_DAT0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+		MX6_PAD_SD2_DAT1__USDHC2_DAT1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+		MX6_PAD_SD2_DAT2__USDHC2_DAT2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+		MX6_PAD_SD2_DAT3__USDHC2_DAT3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+		MX6_PAD_SD2_DAT4__USDHC2_DAT4 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+		MX6_PAD_SD2_DAT5__USDHC2_DAT5 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+		MX6_PAD_SD2_DAT6__USDHC2_DAT6 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+		MX6_PAD_SD2_DAT7__USDHC2_DAT7 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
+	};
+
+	imx_iomux_v3_setup_multiple_pads(usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
+
+	usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
+	return fsl_esdhc_initialize(bis, &usdhc_cfg[0]);
+}
+
+int board_usb_phy_mode(int port)
+{
+	return USB_INIT_DEVICE;
+}
+
+int board_early_init_f(void)
+{
+	setup_iomux_uart();
+	return 0;
+}
+
+int board_init(void)
+{
+	/* address of boot parameters */
+	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+	return 0;
+}
+
+int board_late_init(void)
+{
+#ifdef CONFIG_HW_WATCHDOG
+	hw_watchdog_init();
+#endif
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	puts("Board: WaRP Board\n");
+
+	return 0;
+}