summaryrefslogtreecommitdiff
path: root/board/wandboard/README
diff options
context:
space:
mode:
Diffstat (limited to 'board/wandboard/README')
-rw-r--r--board/wandboard/README22
1 files changed, 8 insertions, 14 deletions
diff --git a/board/wandboard/README b/board/wandboard/README
index 1f678e1..c6c0132 100644
--- a/board/wandboard/README
+++ b/board/wandboard/README
@@ -12,31 +12,25 @@ http://www.wandboard.org/
Building U-boot for Wandboard
-----------------------------
-To build U-Boot for the Wandboard Dual Lite version:
+To build U-Boot for the Wandboard:
-$ make wandboard_dl_config
-$ make
-
-To build U-Boot for the Wandboard Solo version:
-
-$ make wandboard_solo_config
-$ make
-
-To build U-Boot for the Wandboard Quad version:
-
-$ make wandboard_quad_config
+$ make wandboard_config
$ make
Flashing U-boot into the SD card
--------------------------------
-- After the 'make' command completes, the generated 'u-boot.imx' binary must be
+- After the 'make' command completes, the generated 'SPL' binary must be
flashed into the SD card;
-$ sudo dd if=u-boot.imx of=/dev/mmcblk0 bs=512 seek=2; sync
+$ sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync
(Note - the SD card node may vary, so adjust this as needed).
+- Flash the u-boot.img image into the SD card:
+
+sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync
+
- Insert the SD card into the slot located in the bottom of the board (same side
as the mx6 processor)