summaryrefslogtreecommitdiff
path: root/board/w7o/w7o.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/w7o/w7o.c')
-rw-r--r--board/w7o/w7o.c271
1 files changed, 271 insertions, 0 deletions
diff --git a/board/w7o/w7o.c b/board/w7o/w7o.c
new file mode 100644
index 0000000..b404d61
--- /dev/null
+++ b/board/w7o/w7o.c
@@ -0,0 +1,271 @@
+/*
+ * (C) Copyright 2001
+ * Erik Theisen, Wave 7 Optics, etheisen@mindspring.com.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include "w7o.h"
+#include <asm/processor.h>
+
+#include "vpd.h"
+#include "errors.h"
+#include <watchdog.h>
+
+unsigned long get_dram_size(void);
+
+/*
+ * Macros to transform values
+ * into environment strings.
+ */
+#define XMK_STR(x) #x
+#define MK_STR(x) XMK_STR(x)
+
+/* ------------------------------------------------------------------------- */
+
+int board_pre_init (void)
+{
+#if defined(CONFIG_W7OLMG)
+ /*
+ * Setup GPIO pins - reset devices.
+ */
+ out32(IBM405GP_GPIO0_ODR, 0x10000000); /* one open drain pin */
+ out32(IBM405GP_GPIO0_OR, 0x3E000000); /* set output pins to default */
+ out32(IBM405GP_GPIO0_TCR, 0x7f800000); /* setup for output */
+
+ /*
+ * IRQ 0-15 405GP internally generated; active high; level sensitive
+ * IRQ 16 405GP internally generated; active low; level sensitive
+ * IRQ 17-24 RESERVED
+ * IRQ 25 (EXT IRQ 0) XILINX; active low; level sensitive
+ * IRQ 26 (EXT IRQ 1) PCI INT A; active low; level sensitive
+ * IRQ 27 (EXT IRQ 2) PCI INT B; active low; level sensitive
+ * IRQ 28 (EXT IRQ 3) SAM 2; active low; level sensitive
+ * IRQ 29 (EXT IRQ 4) Battery Bad; active low; level sensitive
+ * IRQ 30 (EXT IRQ 5) Level One PHY; active low; level sensitive
+ * IRQ 31 (EXT IRQ 6) SAM 1; active high; level sensitive
+ */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicer, 0x00000000); /* disable all ints */
+
+ mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
+ mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */
+ mtdcr(uictr, 0x10000000); /* set int trigger levels */
+ mtdcr(uicvcr, 0x00000001); /* set vect base=0,
+ INT0 highest priority*/
+
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+
+#elif defined(CONFIG_W7OLMC)
+ /*
+ * Setup GPIO pins
+ */
+ out32(IBM405GP_GPIO0_ODR, 0x01800000); /* XCV Done Open Drain */
+ out32(IBM405GP_GPIO0_OR, 0x03800000); /* set out pins to default */
+ out32(IBM405GP_GPIO0_TCR, 0x66C00000); /* setup for output */
+
+ /*
+ * IRQ 0-15 405GP internally generated; active high; level sensitive
+ * IRQ 16 405GP internally generated; active low; level sensitive
+ * IRQ 17-24 RESERVED
+ * IRQ 25 (EXT IRQ 0) DBE 0; active low; level sensitive
+ * IRQ 26 (EXT IRQ 1) DBE 1; active low; level sensitive
+ * IRQ 27 (EXT IRQ 2) DBE 2; active low; level sensitive
+ * IRQ 28 (EXT IRQ 3) DBE Common; active low; level sensitive
+ * IRQ 29 (EXT IRQ 4) PCI; active low; level sensitive
+ * IRQ 30 (EXT IRQ 5) RCMM Reset; active low; level sensitive
+ * IRQ 31 (EXT IRQ 6) PHY; active high; level sensitive
+ */
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(uicer, 0x00000000); /* disable all ints */
+
+ mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/
+ mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */
+ mtdcr(uictr, 0x10000000); /* set int trigger levels */
+ mtdcr(uicvcr, 0x00000001); /* set vect base=0,
+ INT0 highest priority*/
+
+ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
+
+#else /* Unknown */
+# error "Unknown W7O board configuration"
+#endif
+
+ WATCHDOG_RESET(); /* Reset the watchdog */
+ temp_uart_init(); /* init the uart for debug */
+ WATCHDOG_RESET(); /* Reset the watchdog */
+ test_led(); /* test the LEDs */
+ test_sdram(get_dram_size()); /* test the dram */
+ log_stat(ERR_POST1); /* log status,post1 complete */
+ return 0;
+}
+
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check Board Identity:
+ */
+int checkboard (void)
+{
+ VPD vpd;
+
+ puts ("Board: ");
+
+ /* VPD data present in I2C EEPROM */
+ if (vpd_get_data(CFG_DEF_EEPROM_ADDR, &vpd) == 0) {
+ /*
+ * Known board type.
+ */
+ if (vpd.productId[0] &&
+ ((strncmp(vpd.productId, "GMM", 3) == 0) ||
+ (strncmp(vpd.productId, "CMM", 3) == 0))) {
+
+ /* Output board information on startup */
+ printf("\"%s\", revision '%c', serial# %ld, manufacturer %u\n",
+ vpd.productId, vpd.revisionId, vpd.serialNum, vpd.manuID);
+ return (0);
+ }
+ }
+
+ puts ("### Unknown HW ID - assuming NOTHING\n");
+ return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+ return get_dram_size();
+}
+
+unsigned long get_dram_size (void)
+{
+ int tmp, i, regs[4];
+ int size = 0;
+
+ /* Get bank Size registers */
+ mtdcr(memcfga, mem_mb0cf); /* get bank 0 config reg */
+ regs[0] = mfdcr(memcfgd);
+
+ mtdcr(memcfga, mem_mb1cf); /* get bank 1 config reg */
+ regs[1] = mfdcr(memcfgd);
+
+ mtdcr(memcfga, mem_mb2cf); /* get bank 2 config reg */
+ regs[2] = mfdcr(memcfgd);
+
+ mtdcr(memcfga, mem_mb3cf); /* get bank 3 config reg */
+ regs[3] = mfdcr(memcfgd);
+
+ /* compute the size, add each bank if enabled */
+ for(i = 0; i < 4; i++) {
+ if (regs[i] & 0x0001) { /* if enabled, */
+ tmp = ((regs[i] >> (31 - 14)) & 0x7); /* get size bits */
+ tmp = 0x400000 << tmp; /* Size bits X 4MB = size */
+ size += tmp;
+ }
+ }
+
+ return size;
+}
+
+int misc_init_f (void)
+{
+ return 0;
+}
+
+static void
+w7o_env_init(VPD *vpd)
+{
+ /*
+ * Read VPD
+ */
+ if (vpd_get_data(CFG_DEF_EEPROM_ADDR, vpd) != 0)
+ return;
+
+ /*
+ * Known board type.
+ */
+ if (vpd->productId[0] &&
+ ((strncmp(vpd->productId, "GMM", 3) == 0) ||
+ (strncmp(vpd->productId, "CMM", 3) == 0))) {
+ char buf[30];
+ char *eth;
+ unsigned char *serial = getenv("serial#");
+ unsigned char *ethaddr = getenv("ethaddr");
+
+ /* Set 'serial#' envvar if serial# isn't set */
+ if (!serial) {
+ sprintf(buf, "%s-%ld", vpd->productId, vpd->serialNum);
+ setenv("serial#", buf);
+ }
+
+ /* Set 'ethaddr' envvar if 'ethaddr' envvar is the default */
+ eth = vpd->ethAddrs[0];
+ if (ethaddr && (strcmp(ethaddr, MK_STR(CONFIG_ETHADDR)) == 0)) {
+ /* Now setup ethaddr */
+ sprintf(buf, "%02x:%02x:%02x:%02x:%02x:%02x",
+ eth[0], eth[1], eth[2], eth[3], eth[4], eth[5]);
+ setenv("ethaddr", buf);
+ }
+ }
+} /* w7o_env_init() */
+
+
+int misc_init_r (void)
+{
+ VPD vpd; /* VPD information */
+
+#if defined(CONFIG_W7OLMG)
+ unsigned long greg; /* GPIO Register */
+
+ greg = in32(IBM405GP_GPIO0_OR);
+
+ /*
+ * XXX - Unreset devices - this should be moved into VxWorks driver code
+ */
+ greg |= 0x41800000L; /* SAM, PHY, Galileo */
+
+ out32(IBM405GP_GPIO0_OR, greg); /* set output pins to default */
+#endif /* CONFIG_W7OLMG */
+
+ /*
+ * Initialize W7O environment variables
+ */
+ w7o_env_init(&vpd);
+
+ /*
+ * Initialize the FPGA(s).
+ */
+ if (init_fpga() == 0)
+ test_fpga((unsigned short *)CONFIG_FPGAS_BASE);
+
+ /* More POST testing. */
+ post2();
+
+ /* Done with hardware initialization and POST. */
+ log_stat(ERR_POSTOK);
+
+ /* Call silly, fail safe boot init routine */
+ init_fsboot();
+
+ return (0);
+}
+