summaryrefslogtreecommitdiff
path: root/board/trab
diff options
context:
space:
mode:
Diffstat (limited to 'board/trab')
-rw-r--r--board/trab/Makefile1
-rw-r--r--board/trab/auto_update.c22
-rw-r--r--board/trab/cmd_trab.c8
-rw-r--r--board/trab/trab_fkt.c32
4 files changed, 33 insertions, 30 deletions
diff --git a/board/trab/Makefile b/board/trab/Makefile
index 868ca42..fbe1c36 100644
--- a/board/trab/Makefile
+++ b/board/trab/Makefile
@@ -50,7 +50,6 @@ $(LIB): $(obj).depend $(OBJS) $(SOBJS)
$(obj)trab_fkt.srec: $(OBJS_FKT) $(LIB)
$(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e trab_fkt $^ $(LIB) \
-L$(obj)../../examples -lstubs \
- -L$(obj)../../lib_generic -lgeneric \
-L$(gcclibdir) -lgcc
$(OBJCOPY) -O srec $(<:.o=) $@
diff --git a/board/trab/auto_update.c b/board/trab/auto_update.c
index f4074ae..54d3645 100644
--- a/board/trab/auto_update.c
+++ b/board/trab/auto_update.c
@@ -34,7 +34,7 @@
#ifdef CONFIG_AUTO_UPDATE
-#ifndef CONFIG_USB_OHCI
+#ifndef CONFIG_USB_OHCI_NEW
#error "must define CONFIG_USB_OHCI"
#endif
@@ -46,8 +46,8 @@
#error "must define CFG_HUSH_PARSER"
#endif
-#if !(CONFIG_COMMANDS & CFG_CMD_FAT)
-#error "must define CFG_CMD_FAT"
+#if !defined(CONFIG_CMD_FAT)
+#error "must define CONFIG_CMD_FAT"
#endif
/*
@@ -450,7 +450,7 @@ do_auto_update(void)
{
block_dev_desc_t *stor_dev;
long sz;
- int i, res, bitmap_first, cnt, old_ctrlc, got_ctrlc;
+ int i, res = 0, bitmap_first, cnt, old_ctrlc, got_ctrlc;
char *env;
long start, end;
@@ -477,18 +477,21 @@ do_auto_update(void)
au_usb_stor_curr_dev = usb_stor_scan(0);
if (au_usb_stor_curr_dev == -1) {
debug ("No device found. Not initialized?\n");
- return -1;
+ res = -1;
+ goto xit;
}
/* check whether it has a partition table */
stor_dev = get_dev("usb", 0);
if (stor_dev == NULL) {
debug ("uknown device type\n");
- return -1;
+ res = -1;
+ goto xit;
}
if (fat_register_device(stor_dev, 1) != 0) {
debug ("Unable to use USB %d:%d for fatls\n",
au_usb_stor_curr_dev, 1);
- return -1;
+ res = -1;
+ goto xit;
}
if (file_fat_detectfs() != 0) {
debug ("file_fat_detectfs failed\n");
@@ -648,9 +651,10 @@ do_auto_update(void)
/* enable the power switch */
*CPLD_VFD_BK &= ~POWER_OFF;
}
- usb_stop();
/* restore the old state */
disable_ctrlc(old_ctrlc);
- return 0;
+xit:
+ usb_stop();
+ return res;
}
#endif /* CONFIG_AUTO_UPDATE */
diff --git a/board/trab/cmd_trab.c b/board/trab/cmd_trab.c
index b82c8ed..daa6aee 100644
--- a/board/trab/cmd_trab.c
+++ b/board/trab/cmd_trab.c
@@ -32,7 +32,7 @@
* TRAB board specific commands. Especially commands for burn-in and function
* test.
*/
-#if (CONFIG_COMMANDS & CFG_CMD_BSP)
+#if defined(CONFIG_CMD_BSP)
/* limits for valid range of VCC5V in mV */
#define VCC5V_MIN 4500
@@ -846,7 +846,7 @@ int do_temp_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
int contact_temp;
int delay = 0;
-#if (CONFIG_COMMANDS & CFG_CMD_DATE)
+#if defined(CONFIG_CMD_DATE)
struct rtc_time tm;
#endif
@@ -862,7 +862,7 @@ int do_temp_log (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
spi_init ();
while (1) {
-#if (CONFIG_COMMANDS & CFG_CMD_DATE)
+#if defined(CONFIG_CMD_DATE)
rtc_get (&tm);
printf ("%4d-%02d-%02d %2d:%02d:%02d - ",
tm.tm_year, tm.tm_mon, tm.tm_mday,
@@ -893,4 +893,4 @@ U_BOOT_CMD(
" For each measurment a timestamp is printeted\n"
);
-#endif /* CFG_CMD_BSP */
+#endif
diff --git a/board/trab/trab_fkt.c b/board/trab/trab_fkt.c
index 71be6e0..7273ef9 100644
--- a/board/trab/trab_fkt.c
+++ b/board/trab/trab_fkt.c
@@ -148,14 +148,14 @@ static int rs485_receive_chars (char *data, int timeout);
static unsigned short updcrc(unsigned short icrc, unsigned char *icp,
unsigned int icnt);
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
static int trab_eeprom_read (char **argv);
static int trab_eeprom_write (char **argv);
int i2c_write_multiple (uchar chip, uint addr, int alen, uchar *buffer,
int len);
int i2c_read_multiple ( uchar chip, uint addr, int alen, uchar *buffer,
int len);
-#endif /* CFG_CMD_I2C */
+#endif
/*
* TRAB board specific commands. Especially commands for burn-in and function
@@ -959,7 +959,7 @@ static int touch_check_pressed (void)
static int touch_write_clibration_values (int calib_point, int x, int y)
{
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
int x_verify = 0;
int y_verify = 0;
@@ -1019,10 +1019,10 @@ static int touch_write_clibration_values (int calib_point, int x, int y)
}
return 1;
#else
- printf ("No I2C support enabled (CFG_CMD_I2C), could not write "
+ printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write "
"to EEPROM\n");
return (1);
-#endif /* CFG_CMD_I2C */
+#endif
}
@@ -1105,7 +1105,7 @@ static int rs485_receive_chars (char *data, int timeout)
int do_serial_number (char **argv)
{
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
unsigned int serial_number;
if (strcmp (argv[2], "read") == 0) {
@@ -1130,16 +1130,16 @@ int do_serial_number (char **argv)
printf ("%s: unknown command %s\n", __FUNCTION__, argv[2]);
return (1); /* unknown command, return error */
#else
- printf ("No I2C support enabled (CFG_CMD_I2C), could not write "
+ printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write "
"to EEPROM\n");
return (1);
-#endif /* CFG_CMD_I2C */
+#endif
}
int do_crc16 (void)
{
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
int crc;
unsigned char buf[EEPROM_MAX_CRC_BUF];
@@ -1160,10 +1160,10 @@ int do_crc16 (void)
}
return (0);
#else
- printf ("No I2C support enabled (CFG_CMD_I2C), could not write "
+ printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write "
"to EEPROM\n");
return (1);
-#endif /* CFG_CMD_I2C */
+#endif
}
@@ -1260,7 +1260,7 @@ int do_gain (char **argv)
int do_eeprom (char **argv)
{
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
if (strcmp (argv[2], "read") == 0) {
return (trab_eeprom_read (argv));
}
@@ -1272,13 +1272,13 @@ int do_eeprom (char **argv)
printf ("%s: invalid parameter %s\n", __FUNCTION__, argv[2]);
return (1);
#else
- printf ("No I2C support enabled (CFG_CMD_I2C), could not write "
+ printf ("No I2C support enabled (CONFIG_CMD_I2C), could not write "
"to EEPROM\n");
return (1);
-#endif /* CFG_CMD_I2C */
+#endif
}
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
static int trab_eeprom_read (char **argv)
{
int i;
@@ -1408,4 +1408,4 @@ int i2c_read_multiple ( uchar chip, uint addr, int alen,
}
return (0);
}
-#endif /* CFG_CMD_I2C */
+#endif