diff options
Diffstat (limited to 'board/trab/trab.c')
| -rw-r--r-- | board/trab/trab.c | 67 |
1 files changed, 34 insertions, 33 deletions
diff --git a/board/trab/trab.c b/board/trab/trab.c index 828facd..0f74e8f 100644 --- a/board/trab/trab.c +++ b/board/trab/trab.c @@ -77,36 +77,36 @@ int board_init () #ifdef CONFIG_TRAB_50MHZ /* change the clock to be 50 MHz 1:1:1 */ /* MDIV:0x5c PDIV:4 SDIV:2 */ - clk_power->MPLLCON = 0x5c042; - clk_power->CLKDIVN = 0; + clk_power->mpllcon = 0x5c042; + clk_power->clkdivn = 0; #else /* change the clock to be 133 MHz 1:2:4 */ /* MDIV:0x7d PDIV:4 SDIV:1 */ - clk_power->MPLLCON = 0x7d041; - clk_power->CLKDIVN = 3; + clk_power->mpllcon = 0x7d041; + clk_power->clkdivn = 3; #endif /* set up the I/O ports */ - gpio->PACON = 0x3ffff; - gpio->PBCON = 0xaaaaaaaa; - gpio->PBUP = 0xffff; + gpio->pacon = 0x3ffff; + gpio->pbcon = 0xaaaaaaaa; + gpio->pbup = 0xffff; /* INPUT nCTS0 nRTS0 TXD[1] TXD[0] RXD[1] RXD[0] */ /* 00, 10, 10, 10, 10, 10, 10 */ - gpio->PFCON = (2<<0) | (2<<2) | (2<<4) | (2<<6) | (2<<8) | (2<<10); + gpio->pfcon = (2<<0) | (2<<2) | (2<<4) | (2<<6) | (2<<8) | (2<<10); #ifdef CONFIG_HWFLOW /* do not pull up RXD0, RXD1, TXD0, TXD1, CTS0, RTS0 */ - gpio->PFUP = (1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<4) | (1<<5); + gpio->pfup = (1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<4) | (1<<5); #else /* do not pull up RXD0, RXD1, TXD0, TXD1 */ - gpio->PFUP = (1<<0) | (1<<1) | (1<<2) | (1<<3); + gpio->pfup = (1<<0) | (1<<1) | (1<<2) | (1<<3); #endif - gpio->PGCON = 0x0; - gpio->PGUP = 0x0; - gpio->OPENCR= 0x0; + gpio->pgcon = 0x0; + gpio->pgup = 0x0; + gpio->opencr = 0x0; /* suppress flicker of the VFDs */ - gpio->MISCCR = 0x40; - gpio->PFCON |= (2<<12); + gpio->misccr = 0x40; + gpio->pfcon |= (2<<12); gd->bd->bi_arch_number = MACH_TYPE_TRAB; @@ -114,8 +114,8 @@ int board_init () gd->bd->bi_boot_params = 0x0c000100; /* Make sure both buzzers are turned off */ - gpio->PDCON |= 0x5400; - gpio->PDDAT &= ~0xE0; + gpio->pdcon |= 0x5400; + gpio->pddat &= ~0xE0; #ifdef CONFIG_VFD vfd_init_clocks(); @@ -132,7 +132,7 @@ int board_init () #ifdef CONFIG_DRIVER_S3C24X0_I2C /* Configure I/O ports PG5 und PG6 for I2C */ - gpio->PGCON = (gpio->PGCON & 0x003c00) | 0x003c00; + gpio->pgcon = (gpio->pgcon & 0x003c00) | 0x003c00; #endif /* CONFIG_DRIVER_S3C24X0_I2C */ return 0; @@ -341,14 +341,14 @@ static inline void SET_CS_TOUCH(void) { struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); - gpio->PDDAT &= 0x5FF; + gpio->pddat &= 0x5FF; } static inline void CLR_CS_TOUCH(void) { struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); - gpio->PDDAT |= 0x200; + gpio->pddat |= 0x200; } static void spi_init(void) @@ -358,20 +358,20 @@ static void spi_init(void) int i; /* Configure I/O ports. */ - gpio->PDCON = (gpio->PDCON & 0xF3FFFF) | 0x040000; - gpio->PGCON = (gpio->PGCON & 0x0F3FFF) | 0x008000; - gpio->PGCON = (gpio->PGCON & 0x0CFFFF) | 0x020000; - gpio->PGCON = (gpio->PGCON & 0x03FFFF) | 0x080000; + gpio->pdcon = (gpio->pdcon & 0xF3FFFF) | 0x040000; + gpio->pgcon = (gpio->pgcon & 0x0F3FFF) | 0x008000; + gpio->pgcon = (gpio->pgcon & 0x0CFFFF) | 0x020000; + gpio->pgcon = (gpio->pgcon & 0x03FFFF) | 0x080000; CLR_CS_TOUCH(); - spi->ch[0].SPPRE = 0x1F; /* Baudrate ca. 514kHz */ - spi->ch[0].SPPIN = 0x01; /* SPI-MOSI holds Level after last bit */ - spi->ch[0].SPCON = 0x1A; /* Polling, Prescaler, Master, CPOL=0, CPHA=1 */ + spi->ch[0].sppre = 0x1F; /* Baudrate ca. 514kHz */ + spi->ch[0].sppin = 0x01; /* SPI-MOSI holds Level after last bit */ + spi->ch[0].spcon = 0x1A; /* Polling, Prescale, Master, CPOL=0, CPHA=1 */ /* Dummy byte ensures clock to be low. */ for (i = 0; i < 10; i++) { - spi->ch[0].SPTDAT = 0xFF; + spi->ch[0].sptdat = 0xFF; } wait_transmit_done(); } @@ -380,7 +380,8 @@ static void wait_transmit_done(void) { struct s3c24x0_spi * const spi = s3c24x0_get_base_spi(); - while (!(spi->ch[0].SPSTA & 0x01)); /* wait until transfer is done */ + while (!(spi->ch[0].spsta & 0x01)) /* wait until transfer is done */ + ; } static void tsc2000_write(unsigned int page, unsigned int reg, @@ -394,13 +395,13 @@ static void tsc2000_write(unsigned int page, unsigned int reg, command |= (page << 11); command |= (reg << 5); - spi->ch[0].SPTDAT = (command & 0xFF00) >> 8; + spi->ch[0].sptdat = (command & 0xFF00) >> 8; wait_transmit_done(); - spi->ch[0].SPTDAT = (command & 0x00FF); + spi->ch[0].sptdat = (command & 0x00FF); wait_transmit_done(); - spi->ch[0].SPTDAT = (data & 0xFF00) >> 8; + spi->ch[0].sptdat = (data & 0xFF00) >> 8; wait_transmit_done(); - spi->ch[0].SPTDAT = (data & 0x00FF); + spi->ch[0].sptdat = (data & 0x00FF); wait_transmit_done(); CLR_CS_TOUCH(); |