diff options
Diffstat (limited to 'board/tqm5200/tqm5200.c')
| -rw-r--r-- | board/tqm5200/tqm5200.c | 387 |
1 files changed, 387 insertions, 0 deletions
diff --git a/board/tqm5200/tqm5200.c b/board/tqm5200/tqm5200.c new file mode 100644 index 0000000..898f1f4 --- /dev/null +++ b/board/tqm5200/tqm5200.c @@ -0,0 +1,387 @@ +/* + * (C) Copyright 2003-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * (C) Copyright 2004 + * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. + * + * (C) Copyright 2004 + * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <mpc5xxx.h> +#include <pci.h> + +#if defined(CONFIG_MPC5200_DDR) +#include "mt46v16m16-75.h" +#else +#include "mt48lc16m16a2-75.h" +#endif + +#ifndef CFG_RAMBOOT +static void sdram_start (int hi_addr) +{ + long hi_addr_bit = hi_addr ? 0x01000000 : 0; + + /* unlock mode register */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | + hi_addr_bit; + __asm__ volatile ("sync"); + + /* precharge all banks */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | + hi_addr_bit; + __asm__ volatile ("sync"); + +#if SDRAM_DDR + /* set mode register: extended mode */ + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE; + __asm__ volatile ("sync"); + + /* set mode register: reset DLL */ + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000; + __asm__ volatile ("sync"); +#endif + + /* precharge all banks */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | + hi_addr_bit; + __asm__ volatile ("sync"); + + /* auto refresh */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | + hi_addr_bit; + __asm__ volatile ("sync"); + + /* set mode register */ + *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; + __asm__ volatile ("sync"); + + /* normal operation */ + *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; + __asm__ volatile ("sync"); +} +#endif + +/* + * ATTENTION: Although partially referenced initdram does NOT make real use + * use of CFG_SDRAM_BASE. The code does not work if CFG_SDRAM_BASE + * is something else than 0x00000000. + */ + +#if defined(CONFIG_MPC5200) +long int initdram (int board_type) +{ + ulong dramsize = 0; + ulong dramsize2 = 0; +#ifndef CFG_RAMBOOT + ulong test1, test2; + + /* setup SDRAM chip selects */ + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001c; /* 512MB at 0x0 */ + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x40000000; /* disabled */ + __asm__ volatile ("sync"); + + /* setup config registers */ + *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; + *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; + __asm__ volatile ("sync"); + +#if SDRAM_DDR + /* set tap delay */ + *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY; + __asm__ volatile ("sync"); +#endif + + /* find RAM size using SDRAM CS0 only */ + sdram_start(0); + test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000); + sdram_start(1); + test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x20000000); + if (test1 > test2) { + sdram_start(0); + dramsize = test1; + } else { + dramsize = test2; + } + + /* memory smaller than 1MB is impossible */ + if (dramsize < (1 << 20)) { + dramsize = 0; + } + + /* set SDRAM CS0 size according to the amount of RAM found */ + if (dramsize > 0) { + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + + __builtin_ffs(dramsize >> 20) - 1; + } else { + *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ + } + + /* let SDRAM CS1 start right after CS0 */ + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001c; /* 512MB */ + + /* find RAM size using SDRAM CS1 only */ + sdram_start(0); + test1 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x20000000); + sdram_start(1); + test2 = get_ram_size((ulong *)(CFG_SDRAM_BASE + dramsize), 0x20000000); + if (test1 > test2) { + sdram_start(0); + dramsize2 = test1; + } else { + dramsize2 = test2; + } + + /* memory smaller than 1MB is impossible */ + if (dramsize2 < (1 << 20)) { + dramsize2 = 0; + } + + /* set SDRAM CS1 size according to the amount of RAM found */ + if (dramsize2 > 0) { + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + | (0x13 + __builtin_ffs(dramsize2 >> 20) - 1); + } else { + *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */ + } + +#else /* CFG_RAMBOOT */ + + /* retrieve size of memory connected to SDRAM CS0 */ + dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; + if (dramsize >= 0x13) { + dramsize = (1 << (dramsize - 0x13)) << 20; + } else { + dramsize = 0; + } + + /* retrieve size of memory connected to SDRAM CS1 */ + dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF; + if (dramsize2 >= 0x13) { + dramsize2 = (1 << (dramsize2 - 0x13)) << 20; + } else { + dramsize2 = 0; + } + +#endif /* CFG_RAMBOOT */ + +/* return dramsize + dramsize2; */ + return dramsize; +} + +#elif defined(CONFIG_MGT5100) + +long int initdram (int board_type) +{ + ulong dramsize = 0; +#ifndef CFG_RAMBOOT + ulong test1, test2; + + /* setup and enable SDRAM chip selects */ + *(vu_long *)MPC5XXX_SDRAM_START = 0x00000000; + *(vu_long *)MPC5XXX_SDRAM_STOP = 0x0000ffff;/* 2G */ + *(vu_long *)MPC5XXX_ADDECR |= (1 << 22); /* Enable SDRAM */ + __asm__ volatile ("sync"); + + /* setup config registers */ + *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; + *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; + + /* address select register */ + *(vu_long *)MPC5XXX_SDRAM_XLBSEL = SDRAM_ADDRSEL; + __asm__ volatile ("sync"); + + /* find RAM size */ + sdram_start(0); + test1 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000); + sdram_start(1); + test2 = get_ram_size((ulong *)CFG_SDRAM_BASE, 0x80000000); + if (test1 > test2) { + sdram_start(0); + dramsize = test1; + } else { + dramsize = test2; + } + + /* set SDRAM end address according to size */ + *(vu_long *)MPC5XXX_SDRAM_STOP = ((dramsize - 1) >> 15); + +#else /* CFG_RAMBOOT */ + + /* Retrieve amount of SDRAM available */ + dramsize = ((*(vu_long *)MPC5XXX_SDRAM_STOP + 1) << 15); + +#endif /* CFG_RAMBOOT */ + + return dramsize; +} + +#else +#error Neither CONFIG_MPC5200 or CONFIG_MGT5100 defined +#endif + +int checkboard (void) +{ +#if defined (CONFIG_TQM5200_AA) + puts ("Board: TQM5200-AA (TQ-Systems GmbH)\n"); +#endif +#if defined (CONFIG_TQM5200_AB) + puts ("Board: TQM5200-AB (TQ-Systems GmbH)\n"); +#endif +#if defined (CONFIG_TQM5200_AC) + puts ("Board: TQM5200-AC (TQ-Systems GmbH)\n"); +#endif + return 0; +} + +void flash_preinit(void) +{ + /* + * Now, when we are in RAM, enable flash write + * access for detection process. + * Note that CS_BOOT cannot be cleared when + * executing in flash. + */ +#if defined(CONFIG_MGT5100) + *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */ + *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */ +#endif + *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ +} + + +#ifdef CONFIG_PCI +static struct pci_controller hose; + +extern void pci_mpc5xxx_init(struct pci_controller *); + +void pci_init_board(void) +{ + pci_mpc5xxx_init(&hose); +} +#endif + +#if defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) + +#if defined (CONFIG_MINIFAP) +#define SM501_POWER_MODE0_GATE 0x00000040UL +#define SM501_POWER_MODE1_GATE 0x00000048UL +#define POWER_MODE_GATE_GPIO_PWM_I2C 0x00000040UL +#define SM501_GPIO_DATA_DIR_HIGH 0x0001000CUL +#define SM501_GPIO_DATA_HIGH 0x00010004UL +#define SM501_GPIO_51 0x00080000UL +#else +#define GPIO_PSC1_4 0x01000000UL +#endif + +void init_ide_reset (void) +{ + debug ("init_ide_reset\n"); + +#if defined (CONFIG_MINIFAP) + /* Configure GPIO_51 of the SM501 grafic controller as ATA reset */ + + /* enable GPIO control (in both power modes) */ + *(vu_long *) (SM501_MMIO_BASE+SM501_POWER_MODE0_GATE) |= + POWER_MODE_GATE_GPIO_PWM_I2C; + *(vu_long *) (SM501_MMIO_BASE+SM501_POWER_MODE1_GATE) |= + POWER_MODE_GATE_GPIO_PWM_I2C; + /* configure GPIO51 as output */ + *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_DIR_HIGH) |= + SM501_GPIO_51; +#else + /* Configure PSC1_4 as GPIO output for ATA reset */ + *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4; + *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4; +#endif +} + +void ide_set_reset (int idereset) +{ + debug ("ide_reset(%d)\n", idereset); + +#if defined (CONFIG_MINIFAP) + if (idereset) { + *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_HIGH) &= + ~SM501_GPIO_51; + } else { + *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_HIGH) |= + SM501_GPIO_51; + } +#else + if (idereset) { + *(vu_long *) MPC5XXX_WU_GPIO_DATA &= ~GPIO_PSC1_4; + } else { + *(vu_long *) MPC5XXX_WU_GPIO_DATA |= GPIO_PSC1_4; + } +#endif +} +#endif /* defined (CFG_CMD_IDE) && defined (CONFIG_IDE_RESET) */ + +#ifdef CONFIG_POST +/* + * Reads GPIO pin PSC6_3. A keypress is reported, if PSC6_3 is low. If PSC6_3 + * is left open, no keypress is detected. + */ +int post_hotkeys_pressed(void) +{ + struct mpc5xxx_gpio *gpio; + + gpio = (struct mpc5xxx_gpio*) MPC5XXX_GPIO; + + /* + * Configure PSC6_1 and PSC6_3 as GPIO. PSC6 then couldn't be used in + * CODEC or UART mode. Consumer IrDA should still be possible. + */ + gpio->port_config &= ~(0x07000000); + gpio->port_config |= 0x03000000; + + /* Enable GPIO for GPIO_IRDA_1 (IR_USB_CLK pin) = PSC6_3 */ + gpio->simple_gpioe |= 0x20000000; + + /* Configure GPIO_IRDA_1 as input */ + gpio->simple_ddr &= ~(0x20000000); + + return ((gpio->simple_ival & 0x20000000) ? 0 : 1); +} +#endif + +#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER) + +void post_word_store (ulong a) +{ + volatile ulong *save_addr = + (volatile ulong *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE); + + *save_addr = a; +} + +ulong post_word_load (void) +{ + volatile ulong *save_addr = + (volatile ulong *)(MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE); + + return *save_addr; +} + +#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/ |