diff options
Diffstat (limited to 'board/tqc/tqm85xx/tlb.c')
| -rw-r--r-- | board/tqc/tqm85xx/tlb.c | 97 |
1 files changed, 97 insertions, 0 deletions
diff --git a/board/tqc/tqm85xx/tlb.c b/board/tqc/tqm85xx/tlb.c index 7f4efc1..380448a 100644 --- a/board/tqc/tqm85xx/tlb.c +++ b/board/tqc/tqm85xx/tlb.c @@ -44,6 +44,7 @@ struct fsl_e_tlb_entry tlb_table[] = { MAS3_SX | MAS3_SW | MAS3_SR, 0, 0, 0, BOOKE_PAGESZ_4K, 0), +#ifndef CONFIG_TQM_BIGFLASH /* * TLB 0, 1: 128M Non-cacheable, guarded * 0xf8000000 128M FLASH @@ -146,6 +147,102 @@ struct fsl_e_tlb_entry tlb_table[] = { 0, 9, BOOKE_PAGESZ_16M, 1), #endif /* CONFIG_PCIE */ +#else /* CONFIG_TQM_BIGFLASH */ + + /* + * TLB 0,1,2,3: 1G Non-cacheable, guarded + * 0xc0000000 1G FLASH + * Out of reset this entry is only 4K. + */ + SET_TLB_ENTRY (1, CFG_FLASH_BASE, CFG_FLASH_BASE, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 3, BOOKE_PAGESZ_256M, 1), + SET_TLB_ENTRY (1, CFG_FLASH_BASE + 0x10000000, + CFG_FLASH_BASE + 0x10000000, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 2, BOOKE_PAGESZ_256M, 1), + SET_TLB_ENTRY (1, CFG_FLASH_BASE + 0x20000000, + CFG_FLASH_BASE + 0x20000000, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 1, BOOKE_PAGESZ_256M, 1), + SET_TLB_ENTRY (1, CFG_FLASH_BASE + 0x30000000, + CFG_FLASH_BASE + 0x30000000, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 0, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 4: 256M Non-cacheable, guarded + * 0x80000000 256M PCI1 MEM First half + */ + SET_TLB_ENTRY (1, CFG_PCI1_MEM_PHYS, CFG_PCI1_MEM_PHYS, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 4, BOOKE_PAGESZ_256M, 1), + + /* + * TLB 5: 256M Non-cacheable, guarded + * 0x90000000 256M PCI1 MEM Second half + */ + SET_TLB_ENTRY (1, CFG_PCI1_MEM_PHYS + 0x10000000, + CFG_PCI1_MEM_PHYS + 0x10000000, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 5, BOOKE_PAGESZ_256M, 1), + +#ifdef CONFIG_PCIE1 + /* + * TLB 6: 256M Non-cacheable, guarded + * 0xc0000000 256M PCI express MEM First half + */ + SET_TLB_ENTRY (1, CFG_PCIE1_MEM_BASE, CFG_PCIE1_MEM_BASE, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 6, BOOKE_PAGESZ_256M, 1), +#else /* !CONFIG_PCIE */ + /* + * TLB 6: 256M Non-cacheable, guarded + * 0xb0000000 256M Rapid IO MEM First half + */ + SET_TLB_ENTRY (1, CFG_RIO_MEM_BASE, CFG_RIO_MEM_BASE, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 6, BOOKE_PAGESZ_256M, 1), + +#endif /* CONFIG_PCIE */ + + /* + * TLB 7: 64M Non-cacheable, guarded + * 0xa0000000 1M CCSRBAR + * 0xa2000000 16M PCI1 IO + * 0xa3000000 16M CAN and NAND Flash + */ + SET_TLB_ENTRY (1, CFG_CCSRBAR, CFG_CCSRBAR_PHYS, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 7, BOOKE_PAGESZ_64M, 1), + + /* + * TLB 8+9: 512M DDR, cache disabled (needed for memory test) + * 0x00000000 512M DDR System memory + * Without SPD EEPROM configured DDR, this must be setup manually. + * Make sure the TLB count at the top of this table is correct. + * Likely it needs to be increased by two for these entries. + */ + SET_TLB_ENTRY (1, CFG_DDR_SDRAM_BASE, CFG_DDR_SDRAM_BASE, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 8, BOOKE_PAGESZ_256M, 1), + + SET_TLB_ENTRY (1, CFG_DDR_SDRAM_BASE + 0x10000000, + CFG_DDR_SDRAM_BASE + 0x10000000, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 9, BOOKE_PAGESZ_256M, 1), + +#ifdef CONFIG_PCIE1 + /* + * TLB 10: 16M Non-cacheable, guarded + * 0xaf000000 16M PCI express IO + */ + SET_TLB_ENTRY (1, CFG_PCIE1_IO_BASE, CFG_PCIE1_IO_BASE, + MAS3_SX | MAS3_SW | MAS3_SR, MAS2_I | MAS2_G, + 0, 10, BOOKE_PAGESZ_16M, 1), +#endif /* CONFIG_PCIE */ + +#endif /* CONFIG_TQM_BIGFLASH */ }; int num_tlb_entries = ARRAY_SIZE (tlb_table); |