summaryrefslogtreecommitdiff
path: root/board/ti
diff options
context:
space:
mode:
Diffstat (limited to 'board/ti')
-rw-r--r--board/ti/am335x/board.c17
-rw-r--r--board/ti/dra7xx/evm.c7
-rw-r--r--board/ti/omap5_uevm/evm.c7
-rw-r--r--board/ti/panda/panda.c60
-rw-r--r--board/ti/ti814x/evm.c5
-rw-r--r--board/ti/ti816x/evm.c17
6 files changed, 74 insertions, 39 deletions
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 57fedab..1459fae 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -107,21 +107,16 @@ static const struct ddr_data ddr2_data = {
(MT47H128M16RT25E_PHY_WR_DATA<<20) |
(MT47H128M16RT25E_PHY_WR_DATA<<10) |
(MT47H128M16RT25E_PHY_WR_DATA<<0)),
- .datauserank0delay = MT47H128M16RT25E_PHY_RANK0_DELAY,
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
};
static const struct cmd_control ddr2_cmd_ctrl_data = {
.cmd0csratio = MT47H128M16RT25E_RATIO,
- .cmd0dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
.cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
.cmd1csratio = MT47H128M16RT25E_RATIO,
- .cmd1dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
.cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
.cmd2csratio = MT47H128M16RT25E_RATIO,
- .cmd2dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
.cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
};
@@ -139,7 +134,6 @@ static const struct ddr_data ddr3_data = {
.datawdsratio0 = MT41J128MJT125_WR_DQS,
.datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE,
.datawrsratio0 = MT41J128MJT125_PHY_WR_DATA,
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
};
static const struct ddr_data ddr3_beagleblack_data = {
@@ -147,7 +141,6 @@ static const struct ddr_data ddr3_beagleblack_data = {
.datawdsratio0 = MT41K256M16HA125E_WR_DQS,
.datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
.datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
};
static const struct ddr_data ddr3_evm_data = {
@@ -155,48 +148,38 @@ static const struct ddr_data ddr3_evm_data = {
.datawdsratio0 = MT41J512M8RH125_WR_DQS,
.datafwsratio0 = MT41J512M8RH125_PHY_FIFO_WE,
.datawrsratio0 = MT41J512M8RH125_PHY_WR_DATA,
- .datadldiff0 = PHY_DLL_LOCK_DIFF,
};
static const struct cmd_control ddr3_cmd_ctrl_data = {
.cmd0csratio = MT41J128MJT125_RATIO,
- .cmd0dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
.cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT,
.cmd1csratio = MT41J128MJT125_RATIO,
- .cmd1dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
.cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT,
.cmd2csratio = MT41J128MJT125_RATIO,
- .cmd2dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
.cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT,
};
static const struct cmd_control ddr3_beagleblack_cmd_ctrl_data = {
.cmd0csratio = MT41K256M16HA125E_RATIO,
- .cmd0dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
.cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
.cmd1csratio = MT41K256M16HA125E_RATIO,
- .cmd1dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
.cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
.cmd2csratio = MT41K256M16HA125E_RATIO,
- .cmd2dldiff = MT41K256M16HA125E_DLL_LOCK_DIFF,
.cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
};
static const struct cmd_control ddr3_evm_cmd_ctrl_data = {
.cmd0csratio = MT41J512M8RH125_RATIO,
- .cmd0dldiff = MT41J512M8RH125_DLL_LOCK_DIFF,
.cmd0iclkout = MT41J512M8RH125_INVERT_CLKOUT,
.cmd1csratio = MT41J512M8RH125_RATIO,
- .cmd1dldiff = MT41J512M8RH125_DLL_LOCK_DIFF,
.cmd1iclkout = MT41J512M8RH125_INVERT_CLKOUT,
.cmd2csratio = MT41J512M8RH125_RATIO,
- .cmd2dldiff = MT41J512M8RH125_DLL_LOCK_DIFF,
.cmd2iclkout = MT41J512M8RH125_INVERT_CLKOUT,
};
diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c
index 9657c75..9ae88c5 100644
--- a/board/ti/dra7xx/evm.c
+++ b/board/ti/dra7xx/evm.c
@@ -14,6 +14,7 @@
#include <palmas.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sata.h>
#include "mux_data.h"
@@ -77,6 +78,12 @@ int board_init(void)
return 0;
}
+int board_late_init(void)
+{
+ omap_sata_init();
+ return 0;
+}
+
/**
* @brief misc_init_r - Configure EVM board specific configurations
* such as power configurations, ethernet initialization as phase2 of
diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c
index bb3a699..af854da 100644
--- a/board/ti/omap5_uevm/evm.c
+++ b/board/ti/omap5_uevm/evm.c
@@ -20,6 +20,7 @@
#include <asm/arch/clock.h>
#include <asm/arch/ehci.h>
#include <asm/ehci-omap.h>
+#include <asm/arch/sata.h>
#define DIE_ID_REG_BASE (OMAP54XX_L4_CORE_BASE + 0x2000)
#define DIE_ID_REG_OFFSET 0x200
@@ -67,6 +68,12 @@ int board_init(void)
return 0;
}
+int board_late_init(void)
+{
+ omap_sata_init();
+ return 0;
+}
+
int board_eth_init(bd_t *bis)
{
return 0;
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index c104024..cda09a9 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -123,6 +123,66 @@ int get_board_revision(void)
}
/**
+ * is_panda_es_rev_b3() - Detect if we are running on rev B3 of panda board ES
+ *
+ *
+ * Detect if we are running on B3 version of ES panda board,
+ * This can be done by reading the level of GPIO 171 and checking the
+ * processor revisions.
+ * GPIO171: 1 => Panda ES Rev B3
+ *
+ * Return : return 1 if Panda ES Rev B3 , else return 0
+ */
+u8 is_panda_es_rev_b3(void)
+{
+ int processor_rev = omap_revision();
+ int ret = 0;
+
+ if ((processor_rev >= OMAP4460_ES1_0 &&
+ processor_rev <= OMAP4460_ES1_1)) {
+
+ /* Setup the mux for the common board ID pins (gpio 171) */
+ writew((IEN | M3),
+ (*ctrl)->control_padconf_core_base + UNIPRO_TX0);
+
+ /* if processor_rev is panda ES and GPIO171 is 1,it is rev b3 */
+ ret = gpio_get_value(PANDA_BOARD_ID_2_GPIO);
+ }
+ return ret;
+}
+
+#ifdef CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS
+/*
+ * emif_get_reg_dump() - emif_get_reg_dump strong function
+ *
+ * @emif_nr - emif base
+ * @regs - reg dump of timing values
+ *
+ * Strong function to override emif_get_reg_dump weak function in sdram_elpida.c
+ */
+void emif_get_reg_dump(u32 emif_nr, const struct emif_regs **regs)
+{
+ u32 omap4_rev = omap_revision();
+
+ /* Same devices and geometry on both EMIFs */
+ if (omap4_rev == OMAP4430_ES1_0)
+ *regs = &emif_regs_elpida_380_mhz_1cs;
+ else if (omap4_rev == OMAP4430_ES2_0)
+ *regs = &emif_regs_elpida_200_mhz_2cs;
+ else if (omap4_rev == OMAP4430_ES2_3)
+ *regs = &emif_regs_elpida_400_mhz_1cs;
+ else if (omap4_rev < OMAP4470_ES1_0) {
+ if(is_panda_es_rev_b3())
+ *regs = &emif_regs_elpida_400_mhz_1cs;
+ else
+ *regs = &emif_regs_elpida_400_mhz_2cs;
+ }
+ else
+ *regs = &emif_regs_elpida_400_mhz_1cs;
+}
+#endif
+
+/**
* @brief misc_init_r - Configure Panda board specific configurations
* such as power configurations, ethernet initialization as phase2 of
* boot sequence
diff --git a/board/ti/ti814x/evm.c b/board/ti/ti814x/evm.c
index e406326..0b76a77 100644
--- a/board/ti/ti814x/evm.c
+++ b/board/ti/ti814x/evm.c
@@ -33,15 +33,12 @@ static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
#ifdef CONFIG_SPL_BUILD
static const struct cmd_control evm_ddr2_cctrl_data = {
.cmd0csratio = 0x80,
- .cmd0dldiff = 0x04,
.cmd0iclkout = 0x00,
.cmd1csratio = 0x80,
- .cmd1dldiff = 0x04,
.cmd1iclkout = 0x00,
.cmd2csratio = 0x80,
- .cmd2dldiff = 0x04,
.cmd2iclkout = 0x00,
};
@@ -77,8 +74,6 @@ static const struct ddr_data evm_ddr2_data = {
.datagiratio0 = ((0<<10) | (0<<0)),
.datafwsratio0 = ((0x90<<10) | (0x90<<0)),
.datawrsratio0 = ((0x50<<10) | (0x50<<0)),
- .datauserank0delay = 1,
- .datadldiff0 = 0x4,
};
void set_uart_mux_conf(void)
diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c
index 74d35e9..a53859e 100644
--- a/board/ti/ti816x/evm.c
+++ b/board/ti/ti816x/evm.c
@@ -59,21 +59,16 @@ static struct ddr_data ddr2_data = {
.datagiratio0 = ((0x0<<10) | (0x0<<0)),
.datafwsratio0 = ((0x13A<<10) | (0x13A<<0)),
.datawrsratio0 = ((0x8A<<10) | (0x8A<<0)),
- .datauserank0delay = 0x1,
- .datadldiff0 = 0x0, /* depend on cpu rev, set later */
};
static struct cmd_control ddr2_ctrl = {
.cmd0csratio = 0x80,
- .cmd0dldiff = 0x04, /* reset value is 0x4 */
.cmd0iclkout = 0x00,
.cmd1csratio = 0x80,
- .cmd1dldiff = 0x04, /* reset value is 0x4 */
.cmd1iclkout = 0x00,
.cmd2csratio = 0x80,
- .cmd2dldiff = 0x04, /* reset value is 0x4 */
.cmd2iclkout = 0x00,
};
@@ -150,21 +145,16 @@ static struct ddr_data ddr3_data = {
.datagiratio0 = ((0x20<<10) | 0x20<<0),
.datafwsratio0 = ((RD_DQS_GATE<<10) | (RD_DQS_GATE<<0)),
.datawrsratio0 = (((WR_DQS+0x40)<<10) | ((WR_DQS+0x40)<<0)),
- .datauserank0delay = 0x1,
- .datadldiff0 = 0x0, /* depend on cpu rev, set later */
};
static const struct cmd_control ddr3_ctrl = {
.cmd0csratio = 0x100,
- .cmd0dldiff = 0x004, /* reset value is 0x4 */
.cmd0iclkout = 0x001,
.cmd1csratio = 0x100,
- .cmd1dldiff = 0x004, /* reset value is 0x4 */
.cmd1iclkout = 0x001,
.cmd2csratio = 0x100,
- .cmd2dldiff = 0x004, /* reset value is 0x4 */
.cmd2iclkout = 0x001,
};
@@ -198,11 +188,6 @@ void sdram_init(void)
config_dmm(&evm_lisa_map_regs);
#ifdef CONFIG_TI816X_EVM_DDR2
- ddr2_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
- ddr2_ctrl.cmd0dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
- ddr2_ctrl.cmd1dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
- ddr2_ctrl.cmd2dldiff = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
-
if (CONFIG_TI816X_USE_EMIF0) {
ddr2_emif0_regs.emif_ddr_phy_ctlr_1 =
(get_cpu_rev() == 0x1 ? 0x0000010B : 0x0000030B);
@@ -217,8 +202,6 @@ void sdram_init(void)
#endif
#ifdef CONFIG_TI816X_EVM_DDR3
- ddr3_data.datadldiff0 = (get_cpu_rev() == 0x1 ? 0x0 : 0xF);
-
if (CONFIG_TI816X_USE_EMIF0)
config_ddr(0, 0, &ddr3_data, &ddr3_ctrl, &ddr3_emif0_regs, 0);
generated by cgit v1.1 at 2024-10-29 03:53:53 +0000