summaryrefslogtreecommitdiff
path: root/board/ti
diff options
context:
space:
mode:
Diffstat (limited to 'board/ti')
-rw-r--r--board/ti/evm/evm.c45
-rw-r--r--board/ti/evm/evm.h1
-rw-r--r--board/ti/panda/Makefile2
-rw-r--r--board/ti/panda/config.mk31
-rw-r--r--board/ti/panda/panda.c25
-rw-r--r--board/ti/panda/panda_mux_data.h (renamed from board/ti/sdp4430/sdp.h)76
-rw-r--r--board/ti/sdp4430/Makefile2
-rw-r--r--board/ti/sdp4430/config.mk31
-rw-r--r--board/ti/sdp4430/sdp.c25
-rw-r--r--board/ti/sdp4430/sdp4430_mux_data.h (renamed from board/ti/panda/panda.h)128
10 files changed, 122 insertions, 244 deletions
diff --git a/board/ti/evm/evm.c b/board/ti/evm/evm.c
index aaf3033..30c1c57 100644
--- a/board/ti/evm/evm.c
+++ b/board/ti/evm/evm.c
@@ -33,10 +33,14 @@
#include <asm/arch/mem.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
+#include <asm/arch/gpio.h>
#include <i2c.h>
#include <asm/mach-types.h>
#include "evm.h"
+#define OMAP3EVM_GPIO_ETH_RST_GEN1 64
+#define OMAP3EVM_GPIO_ETH_RST_GEN2 7
+
DECLARE_GLOBAL_DATA_PTR;
static u32 omap3_evm_version;
@@ -130,6 +134,9 @@ int misc_init_r(void)
#endif
omap3_evm_get_revision();
+#if defined(CONFIG_CMD_NET)
+ reset_net_chip();
+#endif
dieid_num_r();
return 0;
@@ -146,6 +153,7 @@ void set_muxconf_regs(void)
MUX_EVM();
}
+#ifdef CONFIG_CMD_NET
/*
* Routine: setup_net_chip
* Description: Setting up the configuration GPMC registers specific to the
@@ -153,7 +161,6 @@ void set_muxconf_regs(void)
*/
static void setup_net_chip(void)
{
- struct gpio *gpio3_base = (struct gpio *)OMAP34XX_GPIO3_BASE;
struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
/* Configure GPMC registers */
@@ -172,16 +179,37 @@ static void setup_net_chip(void)
/* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
&ctrl_base->gpmc_nadv_ale);
+}
- /* Make GPIO 64 as output pin */
- writel(readl(&gpio3_base->oe) & ~(GPIO0), &gpio3_base->oe);
-
- /* Now send a pulse on the GPIO pin */
- writel(GPIO0, &gpio3_base->setdataout);
+/**
+ * Reset the ethernet chip.
+ */
+static void reset_net_chip(void)
+{
+ int ret;
+ int rst_gpio;
+
+ if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1) {
+ rst_gpio = OMAP3EVM_GPIO_ETH_RST_GEN1;
+ } else {
+ rst_gpio = OMAP3EVM_GPIO_ETH_RST_GEN2;
+ }
+
+ ret = omap_request_gpio(rst_gpio);
+ if (ret < 0) {
+ printf("Unable to get GPIO %d\n", rst_gpio);
+ return ;
+ }
+
+ /* Configure as output */
+ omap_set_gpio_direction(rst_gpio, 0);
+
+ /* Send a pulse on the GPIO pin */
+ omap_set_gpio_dataout(rst_gpio, 1);
udelay(1);
- writel(GPIO0, &gpio3_base->cleardataout);
+ omap_set_gpio_dataout(rst_gpio, 0);
udelay(1);
- writel(GPIO0, &gpio3_base->setdataout);
+ omap_set_gpio_dataout(rst_gpio, 1);
}
int board_eth_init(bd_t *bis)
@@ -192,3 +220,4 @@ int board_eth_init(bd_t *bis)
#endif
return rc;
}
+#endif /* CONFIG_CMD_NET */
diff --git a/board/ti/evm/evm.h b/board/ti/evm/evm.h
index b721ad6..623cf1b 100644
--- a/board/ti/evm/evm.h
+++ b/board/ti/evm/evm.h
@@ -49,6 +49,7 @@ u32 get_omap3_evm_rev(void);
#if defined(CONFIG_CMD_NET)
static void setup_net_chip(void);
+static void reset_net_chip(void);
#endif
/*
diff --git a/board/ti/panda/Makefile b/board/ti/panda/Makefile
index 2186403..09f88ee 100644
--- a/board/ti/panda/Makefile
+++ b/board/ti/panda/Makefile
@@ -25,7 +25,9 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
+ifndef CONFIG_SPL_BUILD
COBJS := panda.o
+endif
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/ti/panda/config.mk b/board/ti/panda/config.mk
deleted file mode 100644
index 33901a7..0000000
--- a/board/ti/panda/config.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# (C) Copyright 2006-2009
-# Texas Instruments Incorporated, <www.ti.com>
-#
-# OMAP 4430 SDP
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# SDRAM Address Space:
-# 8000'0000 - 9fff'ffff (512 MB)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-CONFIG_SYS_TEXT_BASE = 0x80e80000
diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c
index 78e1910..9afed80 100644
--- a/board/ti/panda/panda.c
+++ b/board/ti/panda/panda.c
@@ -25,7 +25,7 @@
#include <asm/arch/sys_proto.h>
#include <asm/arch/mmc_host_def.h>
-#include "panda.h"
+#include "panda_mux_data.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -65,27 +65,14 @@ int misc_init_r(void)
return 0;
}
-void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
+void set_muxconf_regs_non_essential(void)
{
- int i;
- struct pad_conf_entry *pad = (struct pad_conf_entry *) array;
-
- for (i = 0; i < size; i++, pad++)
- writew(pad->val, base + pad->offset);
-}
-
-/**
- * @brief set_muxconf_regs Setting up the configuration Mux registers
- * specific to the board.
- */
-void set_muxconf_regs(void)
-{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array,
- sizeof(core_padconf_array) /
+ do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
+ sizeof(core_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array,
- sizeof(wkup_padconf_array) /
+ do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
+ sizeof(wkup_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
}
diff --git a/board/ti/sdp4430/sdp.h b/board/ti/panda/panda_mux_data.h
index bf41067..16cc0ad 100644
--- a/board/ti/sdp4430/sdp.h
+++ b/board/ti/panda/panda_mux_data.h
@@ -23,22 +23,12 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
+#ifndef _SDP4430_MUX_DATA_H
+#define _SDP4430_MUX_DATA_H
-#ifndef _SDP_H_
-#define _SDP_H_
-
-#include <asm/io.h>
#include <asm/arch/mux_omap4.h>
-const struct pad_conf_entry core_padconf_array[] = {
- {GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */
- {GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */
- {GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */
- {GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */
- {GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */
- {GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */
- {GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */
- {GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */
+const struct pad_conf_entry core_padconf_array_non_essential[] = {
{GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_32 */
{GPMC_AD9, (PTU | IEN | M3)}, /* gpio_33 */
{GPMC_AD10, (PTU | IEN | M3)}, /* gpio_34 */
@@ -64,8 +54,6 @@ const struct pad_conf_entry core_padconf_array[] = {
{GPMC_NWP, (M3)}, /* gpio_54 */
{GPMC_CLK, (PTD | M3)}, /* gpio_55 */
{GPMC_NADV_ALE, (M3)}, /* gpio_56 */
- {GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */
- {GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */
{GPMC_NBE0_CLE, (M3)}, /* gpio_59 */
{GPMC_NBE1, (PTD | M3)}, /* gpio_60 */
{GPMC_WAIT0, (PTU | IEN | M3)}, /* gpio_61 */
@@ -96,14 +84,14 @@ const struct pad_conf_entry core_padconf_array[] = {
{CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_shutter */
{CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_strobe */
{CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_83 */
- {USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */
- {USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)}, /* usbb1_ulpiphy_stp */
- {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dir */
- {USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_nxt */
- {USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat0 */
- {USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat1 */
- {USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat2 */
- {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat3 */
+ {USBB1_ULPITLL_CLK, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_cawake */
+ {USBB1_ULPITLL_STP, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_cadata */
+ {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_caflag */
+ {USBB1_ULPITLL_NXT, (OFF_EN | M1)}, /* hsi1_acready */
+ {USBB1_ULPITLL_DAT0, (OFF_EN | M1)}, /* hsi1_acwake */
+ {USBB1_ULPITLL_DAT1, (OFF_EN | M1)}, /* hsi1_acdata */
+ {USBB1_ULPITLL_DAT2, (OFF_EN | M1)}, /* hsi1_acflag */
+ {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_caready */
{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */
{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */
{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */
@@ -112,22 +100,12 @@ const struct pad_conf_entry core_padconf_array[] = {
{USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */
{USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */
{USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */
- {SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */
- {SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */
- {SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */
- {SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */
- {SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */
- {SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */
- {SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */
- {SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */
- {SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */
- {SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */
{ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_clkx */
{ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dr */
{ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dx */
{ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_fsx */
- {ABE_MCBSP1_CLKX, (IEN | M1)}, /* abe_slimbus1_clock */
- {ABE_MCBSP1_DR, (IEN | M1)}, /* abe_slimbus1_data */
+ {ABE_MCBSP1_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp1_clkx */
+ {ABE_MCBSP1_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp1_dr */
{ABE_MCBSP1_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp1_dx */
{ABE_MCBSP1_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp1_fsx */
{ABE_PDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_ul_data */
@@ -144,14 +122,6 @@ const struct pad_conf_entry core_padconf_array[] = {
{UART2_RX, (PTU | IEN | M0)}, /* uart2_rx */
{UART2_TX, (M0)}, /* uart2_tx */
{HDQ_SIO, (M3)}, /* gpio_127 */
- {I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */
- {I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */
- {I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */
- {I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */
- {I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */
- {I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */
- {I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */
- {I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */
{MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_clk */
{MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_somi */
{MCSPI1_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_simo */
@@ -159,10 +129,6 @@ const struct pad_conf_entry core_padconf_array[] = {
{MCSPI1_CS1, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* mcspi1_cs1 */
{MCSPI1_CS2, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_139 */
{MCSPI1_CS3, (PTU | IEN | M3)}, /* gpio_140 */
- {UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */
- {UART3_RTS_SD, (M0)}, /* uart3_rts_sd */
- {UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */
- {UART3_TX_IRTX, (M0)}, /* uart3_tx */
{SDMMC5_CLK, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc5_clk */
{SDMMC5_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_cmd */
{SDMMC5_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat0 */
@@ -175,7 +141,7 @@ const struct pad_conf_entry core_padconf_array[] = {
{MCSPI4_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_cs0 */
{UART4_RX, (IEN | M0)}, /* uart4_rx */
{UART4_TX, (M0)}, /* uart4_tx */
- {USBB2_ULPITLL_CLK, (IEN | M3)}, /* gpio_157 */
+ {USBB2_ULPITLL_CLK, (PTD | IEN | M3)}, /* gpio_157 */
{USBB2_ULPITLL_STP, (IEN | M5)}, /* dispc2_data23 */
{USBB2_ULPITLL_DIR, (IEN | M5)}, /* dispc2_data22 */
{USBB2_ULPITLL_NXT, (IEN | M5)}, /* dispc2_data21 */
@@ -207,11 +173,11 @@ const struct pad_conf_entry core_padconf_array[] = {
{FREF_CLK1_OUT, (M0)}, /* fref_clk1_out */
{FREF_CLK2_OUT, (M0)}, /* fref_clk2_out */
{SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */
- {SYS_NIRQ2, (PTU | IEN | M0)}, /* sys_nirq2 */
+ {SYS_NIRQ2, (M7)}, /* sys_nirq2 */
{SYS_BOOT0, (PTU | IEN | M3)}, /* gpio_184 */
{SYS_BOOT1, (M3)}, /* gpio_185 */
{SYS_BOOT2, (PTD | IEN | M3)}, /* gpio_186 */
- {SYS_BOOT3, (M3)}, /* gpio_187 */
+ {SYS_BOOT3, (PTD | IEN | M3)}, /* gpio_187 */
{SYS_BOOT4, (M3)}, /* gpio_188 */
{SYS_BOOT5, (PTD | IEN | M3)}, /* gpio_189 */
{DPM_EMU0, (IEN | M0)}, /* dpm_emu0 */
@@ -236,14 +202,12 @@ const struct pad_conf_entry core_padconf_array[] = {
{DPM_EMU19, (IEN | M5)}, /* dispc2_data0 */
};
-const struct pad_conf_entry wkup_padconf_array[] = {
+const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
{PAD0_SIM_IO, (IEN | M0)}, /* sim_io */
{PAD1_SIM_CLK, (M0)}, /* sim_clk */
{PAD0_SIM_RESET, (M0)}, /* sim_reset */
{PAD1_SIM_CD, (PTU | IEN | M0)}, /* sim_cd */
{PAD0_SIM_PWRCTRL, (M0)}, /* sim_pwrctrl */
- {PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
- {PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
{PAD1_FREF_XTAL_IN, (M0)}, /* # */
{PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */
{PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */
@@ -252,13 +216,15 @@ const struct pad_conf_entry wkup_padconf_array[] = {
{PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
{PAD1_FREF_CLK4_REQ, (PTU | IEN | M0)}, /* # */
{PAD0_FREF_CLK4_OUT, (M0)}, /* # */
- {PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */
{PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */
{PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */
{PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */
{PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */
{PAD0_SYS_BOOT6, (IEN | M3)}, /* gpio_wk9 */
{PAD1_SYS_BOOT7, (IEN | M3)}, /* gpio_wk10 */
+ {PAD1_FREF_CLK3_REQ, (M3)}, /* gpio_wk30 */
+ {PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7 */
+ {PAD0_FREF_CLK4_OUT, (M3)}, /* gpio_wk8 */
};
-#endif
+#endif /* _SDP4430_MUX_DATA_H */
diff --git a/board/ti/sdp4430/Makefile b/board/ti/sdp4430/Makefile
index f1ee544..12f2743 100644
--- a/board/ti/sdp4430/Makefile
+++ b/board/ti/sdp4430/Makefile
@@ -25,7 +25,9 @@ include $(TOPDIR)/config.mk
LIB = $(obj)lib$(BOARD).o
+ifndef CONFIG_SPL_BUILD
COBJS := sdp.o cmd_bat.o
+endif
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/board/ti/sdp4430/config.mk b/board/ti/sdp4430/config.mk
deleted file mode 100644
index 33901a7..0000000
--- a/board/ti/sdp4430/config.mk
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# (C) Copyright 2006-2009
-# Texas Instruments Incorporated, <www.ti.com>
-#
-# OMAP 4430 SDP
-# see http://www.ti.com/ for more information on Texas Instruments
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-# SDRAM Address Space:
-# 8000'0000 - 9fff'ffff (512 MB)
-# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-
-CONFIG_SYS_TEXT_BASE = 0x80e80000
diff --git a/board/ti/sdp4430/sdp.c b/board/ti/sdp4430/sdp.c
index b13c4c5..a5ea682 100644
--- a/board/ti/sdp4430/sdp.c
+++ b/board/ti/sdp4430/sdp.c
@@ -27,7 +27,7 @@
#include <asm/arch/sys_proto.h>
#include <asm/arch/mmc_host_def.h>
-#include "sdp.h"
+#include "sdp4430_mux_data.h"
DECLARE_GLOBAL_DATA_PTR;
@@ -70,27 +70,14 @@ int misc_init_r(void)
return 0;
}
-void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
+void set_muxconf_regs_non_essential(void)
{
- int i;
- struct pad_conf_entry *pad = (struct pad_conf_entry *) array;
-
- for (i = 0; i < size; i++, pad++)
- writew(pad->val, base + pad->offset);
-}
-
-/**
- * @brief set_muxconf_regs Setting up the configuration Mux registers
- * specific to the board.
- */
-void set_muxconf_regs(void)
-{
- do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array,
- sizeof(core_padconf_array) /
+ do_set_mux(CONTROL_PADCONF_CORE, core_padconf_array_non_essential,
+ sizeof(core_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
- do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array,
- sizeof(wkup_padconf_array) /
+ do_set_mux(CONTROL_PADCONF_WKUP, wkup_padconf_array_non_essential,
+ sizeof(wkup_padconf_array_non_essential) /
sizeof(struct pad_conf_entry));
}
diff --git a/board/ti/panda/panda.h b/board/ti/sdp4430/sdp4430_mux_data.h
index e3d090e..16cc0ad 100644
--- a/board/ti/panda/panda.h
+++ b/board/ti/sdp4430/sdp4430_mux_data.h
@@ -23,22 +23,12 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
+#ifndef _SDP4430_MUX_DATA_H
+#define _SDP4430_MUX_DATA_H
-#ifndef _PANDA_H_
-#define _PANDA_H_
-
-#include <asm/io.h>
#include <asm/arch/mux_omap4.h>
-const struct pad_conf_entry core_padconf_array[] = {
- {GPMC_AD0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat0 */
- {GPMC_AD1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat1 */
- {GPMC_AD2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat2 */
- {GPMC_AD3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat3 */
- {GPMC_AD4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat4 */
- {GPMC_AD5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat5 */
- {GPMC_AD6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat6 */
- {GPMC_AD7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_dat7 */
+const struct pad_conf_entry core_padconf_array_non_essential[] = {
{GPMC_AD8, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* gpio_32 */
{GPMC_AD9, (PTU | IEN | M3)}, /* gpio_33 */
{GPMC_AD10, (PTU | IEN | M3)}, /* gpio_34 */
@@ -53,7 +43,7 @@ const struct pad_conf_entry core_padconf_array[] = {
{GPMC_A19, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row7 */
{GPMC_A20, (IEN | M3)}, /* gpio_44 */
{GPMC_A21, (M3)}, /* gpio_45 */
- {GPMC_A22, (M3)}, /* gpio_46 */
+ {GPMC_A22, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col6 */
{GPMC_A23, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col7 */
{GPMC_A24, (PTD | M3)}, /* gpio_48 */
{GPMC_A25, (PTD | M3)}, /* gpio_49 */
@@ -64,14 +54,12 @@ const struct pad_conf_entry core_padconf_array[] = {
{GPMC_NWP, (M3)}, /* gpio_54 */
{GPMC_CLK, (PTD | M3)}, /* gpio_55 */
{GPMC_NADV_ALE, (M3)}, /* gpio_56 */
- {GPMC_NOE, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M1)}, /* sdmmc2_clk */
- {GPMC_NWE, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* sdmmc2_cmd */
{GPMC_NBE0_CLE, (M3)}, /* gpio_59 */
{GPMC_NBE1, (PTD | M3)}, /* gpio_60 */
{GPMC_WAIT0, (PTU | IEN | M3)}, /* gpio_61 */
- {GPMC_WAIT1, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_62 */
+ {GPMC_WAIT1, (IEN | M3)}, /* gpio_62 */
{C2C_DATA11, (PTD | M3)}, /* gpio_100 */
- {C2C_DATA12, (PTU | IEN | M3)}, /* gpio_101 */
+ {C2C_DATA12, (M1)}, /* dsi1_te0 */
{C2C_DATA13, (PTD | M3)}, /* gpio_102 */
{C2C_DATA14, (M1)}, /* dsi2_te0 */
{C2C_DATA15, (PTD | M3)}, /* gpio_104 */
@@ -96,14 +84,14 @@ const struct pad_conf_entry core_padconf_array[] = {
{CAM_SHUTTER, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_shutter */
{CAM_STROBE, (OFF_EN | OFF_PD | OFF_OUT_PTD | M0)}, /* cam_strobe */
{CAM_GLOBALRESET, (PTD | OFF_EN | OFF_PD | OFF_OUT_PTD | M3)}, /* gpio_83 */
- {USBB1_ULPITLL_CLK, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M4)},/* usbb1_ulpiphy_clk */
- {USBB1_ULPITLL_STP, (OFF_EN | OFF_OUT_PTD | M4)}, /* usbb1_ulpiphy_stp */
- {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dir */
- {USBB1_ULPITLL_NXT, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_nxt */
- {USBB1_ULPITLL_DAT0, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat0 */
- {USBB1_ULPITLL_DAT1, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat1 */
- {USBB1_ULPITLL_DAT2, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat2 */
- {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat3 */
+ {USBB1_ULPITLL_CLK, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_cawake */
+ {USBB1_ULPITLL_STP, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_cadata */
+ {USBB1_ULPITLL_DIR, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_caflag */
+ {USBB1_ULPITLL_NXT, (OFF_EN | M1)}, /* hsi1_acready */
+ {USBB1_ULPITLL_DAT0, (OFF_EN | M1)}, /* hsi1_acwake */
+ {USBB1_ULPITLL_DAT1, (OFF_EN | M1)}, /* hsi1_acdata */
+ {USBB1_ULPITLL_DAT2, (OFF_EN | M1)}, /* hsi1_acflag */
+ {USBB1_ULPITLL_DAT3, (IEN | OFF_EN | OFF_IN | M1)}, /* hsi1_caready */
{USBB1_ULPITLL_DAT4, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat4 */
{USBB1_ULPITLL_DAT5, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat5 */
{USBB1_ULPITLL_DAT6, (IEN | OFF_EN | OFF_PD | OFF_IN | M4)}, /* usbb1_ulpiphy_dat6 */
@@ -112,22 +100,12 @@ const struct pad_conf_entry core_padconf_array[] = {
{USBB1_HSIC_STROBE, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usbb1_hsic_strobe */
{USBC1_ICUSB_DP, (IEN | M0)}, /* usbc1_icusb_dp */
{USBC1_ICUSB_DM, (IEN | M0)}, /* usbc1_icusb_dm */
- {SDMMC1_CLK, (PTU | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc1_clk */
- {SDMMC1_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_cmd */
- {SDMMC1_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat0 */
- {SDMMC1_DAT1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat1 */
- {SDMMC1_DAT2, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat2 */
- {SDMMC1_DAT3, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat3 */
- {SDMMC1_DAT4, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat4 */
- {SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */
- {SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */
- {SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */
{ABE_MCBSP2_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_clkx */
{ABE_MCBSP2_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dr */
{ABE_MCBSP2_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp2_dx */
{ABE_MCBSP2_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp2_fsx */
- {ABE_MCBSP1_CLKX, (IEN | M1)}, /* abe_slimbus1_clock */
- {ABE_MCBSP1_DR, (IEN | M1)}, /* abe_slimbus1_data */
+ {ABE_MCBSP1_CLKX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp1_clkx */
+ {ABE_MCBSP1_DR, (IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp1_dr */
{ABE_MCBSP1_DX, (OFF_EN | OFF_OUT_PTD | M0)}, /* abe_mcbsp1_dx */
{ABE_MCBSP1_FSX, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_mcbsp1_fsx */
{ABE_PDM_UL_DATA, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* abe_pdm_ul_data */
@@ -144,14 +122,6 @@ const struct pad_conf_entry core_padconf_array[] = {
{UART2_RX, (PTU | IEN | M0)}, /* uart2_rx */
{UART2_TX, (M0)}, /* uart2_tx */
{HDQ_SIO, (M3)}, /* gpio_127 */
- {I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */
- {I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */
- {I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */
- {I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */
- {I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */
- {I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */
- {I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */
- {I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */
{MCSPI1_CLK, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_clk */
{MCSPI1_SOMI, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_somi */
{MCSPI1_SIMO, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi1_simo */
@@ -159,10 +129,6 @@ const struct pad_conf_entry core_padconf_array[] = {
{MCSPI1_CS1, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M3)}, /* mcspi1_cs1 */
{MCSPI1_CS2, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_139 */
{MCSPI1_CS3, (PTU | IEN | M3)}, /* gpio_140 */
- {UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */
- {UART3_RTS_SD, (M0)}, /* uart3_rts_sd */
- {UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */
- {UART3_TX_IRTX, (M0)}, /* uart3_tx */
{SDMMC5_CLK, (PTU | IEN | OFF_EN | OFF_OUT_PTD | M0)}, /* sdmmc5_clk */
{SDMMC5_CMD, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_cmd */
{SDMMC5_DAT0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc5_dat0 */
@@ -175,7 +141,7 @@ const struct pad_conf_entry core_padconf_array[] = {
{MCSPI4_CS0, (PTD | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* mcspi4_cs0 */
{UART4_RX, (IEN | M0)}, /* uart4_rx */
{UART4_TX, (M0)}, /* uart4_tx */
- {USBB2_ULPITLL_CLK, (IEN | M3)}, /* gpio_157 */
+ {USBB2_ULPITLL_CLK, (PTD | IEN | M3)}, /* gpio_157 */
{USBB2_ULPITLL_STP, (IEN | M5)}, /* dispc2_data23 */
{USBB2_ULPITLL_DIR, (IEN | M5)}, /* dispc2_data22 */
{USBB2_ULPITLL_NXT, (IEN | M5)}, /* dispc2_data21 */
@@ -189,12 +155,12 @@ const struct pad_conf_entry core_padconf_array[] = {
{USBB2_ULPITLL_DAT7, (IEN | M5)}, /* dispc2_data11 */
{USBB2_HSIC_DATA, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_169 */
{USBB2_HSIC_STROBE, (PTD | OFF_EN | OFF_OUT_PTU | M3)}, /* gpio_170 */
- {UNIPRO_TX0, (PTD | IEN | M3)}, /* gpio_171 */
+ {UNIPRO_TX0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col0 */
{UNIPRO_TY0, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col1 */
{UNIPRO_TX1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col2 */
{UNIPRO_TY1, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col3 */
- {UNIPRO_TX2, (PTU | IEN | M3)}, /* gpio_0 */
- {UNIPRO_TY2, (PTU | IEN | M3)}, /* gpio_1 */
+ {UNIPRO_TX2, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col4 */
+ {UNIPRO_TY2, (OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_col5 */
{UNIPRO_RX0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row0 */
{UNIPRO_RY0, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row1 */
{UNIPRO_RX1, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M1)}, /* kpd_row2 */
@@ -205,13 +171,13 @@ const struct pad_conf_entry core_padconf_array[] = {
{USBA0_OTG_DP, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dp */
{USBA0_OTG_DM, (IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* usba0_otg_dm */
{FREF_CLK1_OUT, (M0)}, /* fref_clk1_out */
- {FREF_CLK2_OUT, (PTU | IEN | M3)}, /* gpio_182 */
+ {FREF_CLK2_OUT, (M0)}, /* fref_clk2_out */
{SYS_NIRQ1, (PTU | IEN | M0)}, /* sys_nirq1 */
- {SYS_NIRQ2, (PTU | IEN | M0)}, /* sys_nirq2 */
+ {SYS_NIRQ2, (M7)}, /* sys_nirq2 */
{SYS_BOOT0, (PTU | IEN | M3)}, /* gpio_184 */
{SYS_BOOT1, (M3)}, /* gpio_185 */
{SYS_BOOT2, (PTD | IEN | M3)}, /* gpio_186 */
- {SYS_BOOT3, (M3)}, /* gpio_187 */
+ {SYS_BOOT3, (PTD | IEN | M3)}, /* gpio_187 */
{SYS_BOOT4, (M3)}, /* gpio_188 */
{SYS_BOOT5, (PTD | IEN | M3)}, /* gpio_189 */
{DPM_EMU0, (IEN | M0)}, /* dpm_emu0 */
@@ -236,29 +202,29 @@ const struct pad_conf_entry core_padconf_array[] = {
{DPM_EMU19, (IEN | M5)}, /* dispc2_data0 */
};
-const struct pad_conf_entry wkup_padconf_array[] = {
- {PAD0_SIM_IO, (IEN | M0)}, /* sim_io */
- {PAD1_SIM_CLK, (M0)}, /* sim_clk */
- {PAD0_SIM_RESET, (M0)}, /* sim_reset */
- {PAD1_SIM_CD, (PTU | IEN | M0)}, /* sim_cd */
- {PAD0_SIM_PWRCTRL, (M0)}, /* sim_pwrctrl */
- {PAD1_SR_SCL, (PTU | IEN | M0)}, /* sr_scl */
- {PAD0_SR_SDA, (PTU | IEN | M0)}, /* sr_sda */
- {PAD1_FREF_XTAL_IN, (M0)}, /* # */
- {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */
- {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */
- {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
- {PAD1_FREF_CLK3_REQ, (M3)}, /* gpio_wk30 */
- {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
- {PAD1_FREF_CLK4_REQ, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* led status_1 */
- {PAD0_FREF_CLK4_OUT, (PTU | OFF_EN | OFF_OUT_PTU | M3)}, /* led status_2 */
- {PAD1_SYS_32K, (IEN | M0)}, /* sys_32k */
- {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */
- {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */
- {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */
- {PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */
- {PAD0_SYS_BOOT6, (IEN | M3)}, /* gpio_wk9 */
- {PAD1_SYS_BOOT7, (IEN | M3)}, /* gpio_wk10 */
+const struct pad_conf_entry wkup_padconf_array_non_essential[] = {
+ {PAD0_SIM_IO, (IEN | M0)}, /* sim_io */
+ {PAD1_SIM_CLK, (M0)}, /* sim_clk */
+ {PAD0_SIM_RESET, (M0)}, /* sim_reset */
+ {PAD1_SIM_CD, (PTU | IEN | M0)}, /* sim_cd */
+ {PAD0_SIM_PWRCTRL, (M0)}, /* sim_pwrctrl */
+ {PAD1_FREF_XTAL_IN, (M0)}, /* # */
+ {PAD0_FREF_SLICER_IN, (M0)}, /* fref_slicer_in */
+ {PAD1_FREF_CLK_IOREQ, (M0)}, /* fref_clk_ioreq */
+ {PAD0_FREF_CLK0_OUT, (M2)}, /* sys_drm_msecure */
+ {PAD1_FREF_CLK3_REQ, (PTU | IEN | M0)}, /* # */
+ {PAD0_FREF_CLK3_OUT, (M0)}, /* fref_clk3_out */
+ {PAD1_FREF_CLK4_REQ, (PTU | IEN | M0)}, /* # */
+ {PAD0_FREF_CLK4_OUT, (M0)}, /* # */
+ {PAD0_SYS_NRESPWRON, (M0)}, /* sys_nrespwron */
+ {PAD1_SYS_NRESWARM, (M0)}, /* sys_nreswarm */
+ {PAD0_SYS_PWR_REQ, (PTU | M0)}, /* sys_pwr_req */
+ {PAD1_SYS_PWRON_RESET, (M3)}, /* gpio_wk29 */
+ {PAD0_SYS_BOOT6, (IEN | M3)}, /* gpio_wk9 */
+ {PAD1_SYS_BOOT7, (IEN | M3)}, /* gpio_wk10 */
+ {PAD1_FREF_CLK3_REQ, (M3)}, /* gpio_wk30 */
+ {PAD1_FREF_CLK4_REQ, (M3)}, /* gpio_wk7 */
+ {PAD0_FREF_CLK4_OUT, (M3)}, /* gpio_wk8 */
};
-#endif
+#endif /* _SDP4430_MUX_DATA_H */
generated by cgit v1.1 at 2024-11-08 21:10:46 +0000