summaryrefslogtreecommitdiff
path: root/board/ti/sdp3430/sdp.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/ti/sdp3430/sdp.c')
-rw-r--r--board/ti/sdp3430/sdp.c204
1 files changed, 204 insertions, 0 deletions
diff --git a/board/ti/sdp3430/sdp.c b/board/ti/sdp3430/sdp.c
new file mode 100644
index 0000000..40cf26f
--- /dev/null
+++ b/board/ti/sdp3430/sdp.c
@@ -0,0 +1,204 @@
+/*
+ * (C) Copyright 2004-2009
+ * Texas Instruments Incorporated, <www.ti.com>
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <twl4030.h>
+#include <asm/io.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/mach-types.h>
+#include "sdp.h"
+
+const omap3_sysinfo sysinfo = {
+ DDR_DISCRETE,
+ "OMAP3 SDP3430 board",
+#if defined(CONFIG_ENV_IS_IN_ONENAND)
+ "OneNAND",
+#elif defined(CONFIG_ENV_IS_IN_NAND)
+ "NAND",
+#else
+ "NOR",
+#endif
+};
+
+/* Timing definitions for GPMC controller for Sibley NOR */
+static const u32 gpmc_sdp_nor[] = {
+ SDP3430_NOR_GPMC_CONF1,
+ SDP3430_NOR_GPMC_CONF2,
+ SDP3430_NOR_GPMC_CONF3,
+ SDP3430_NOR_GPMC_CONF4,
+ SDP3430_NOR_GPMC_CONF5,
+ SDP3430_NOR_GPMC_CONF6,
+ /*CONF7- computed as params */
+};
+
+/*
+ * Timing definitions for GPMC controller for Debug Board
+ * Debug board contains access to ethernet and DIP Switch setting
+ * information etc.
+ */
+static const u32 gpmc_sdp_debug[] = {
+ SDP3430_DEBUG_GPMC_CONF1,
+ SDP3430_DEBUG_GPMC_CONF2,
+ SDP3430_DEBUG_GPMC_CONF3,
+ SDP3430_DEBUG_GPMC_CONF4,
+ SDP3430_DEBUG_GPMC_CONF5,
+ SDP3430_DEBUG_GPMC_CONF6,
+ /*CONF7- computed as params */
+};
+
+/* Timing defintions for GPMC OneNAND */
+static const u32 gpmc_sdp_onenand[] = {
+ SDP3430_ONENAND_GPMC_CONF1,
+ SDP3430_ONENAND_GPMC_CONF2,
+ SDP3430_ONENAND_GPMC_CONF3,
+ SDP3430_ONENAND_GPMC_CONF4,
+ SDP3430_ONENAND_GPMC_CONF5,
+ SDP3430_ONENAND_GPMC_CONF6,
+ /*CONF7- computed as params */
+};
+
+/* GPMC definitions for GPMC NAND */
+static const u32 gpmc_sdp_nand[] = {
+ SDP3430_NAND_GPMC_CONF1,
+ SDP3430_NAND_GPMC_CONF2,
+ SDP3430_NAND_GPMC_CONF3,
+ SDP3430_NAND_GPMC_CONF4,
+ SDP3430_NAND_GPMC_CONF5,
+ SDP3430_NAND_GPMC_CONF6,
+ /*CONF7- computed as params */
+};
+
+/* gpmc_cfg is initialized by gpmc_init and we use it here */
+extern struct gpmc *gpmc_cfg;
+
+/**
+ * @brief board_init - gpmc and basic setup as phase1 of boot sequence
+ *
+ * @return 0
+ */
+int board_init(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+ /* TODO: Dynamically pop out CS mapping and program accordingly */
+ /* Configure devices for default ON ON ON settings */
+ enable_gpmc_cs_config(gpmc_sdp_nor, &gpmc_cfg->cs[0],
+ CONFIG_SYS_FLASH_BASE, GPMC_SIZE_128M);
+ enable_gpmc_cs_config(gpmc_sdp_nand, &gpmc_cfg->cs[1], 0x28000000,
+ GPMC_SIZE_16M);
+ enable_gpmc_cs_config(gpmc_sdp_onenand, &gpmc_cfg->cs[2], 0x20000000,
+ GPMC_SIZE_16M);
+ enable_gpmc_cs_config(gpmc_sdp_debug, &gpmc_cfg->cs[3], DEBUG_BASE,
+ GPMC_SIZE_16M);
+ /* board id for Linux */
+ gd->bd->bi_arch_number = MACH_TYPE_OMAP_3430SDP;
+ /* boot param addr */
+ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+ return 0;
+}
+
+#define LAN_RESET_REGISTER (CONFIG_LAN91C96_BASE + 0x01c)
+#define ETH_CONTROL_REG (CONFIG_LAN91C96_BASE + 0x30b)
+
+/**
+ * @brief ether_init Take the Ethernet controller out of reset and wait
+ * for the EEPROM load to complete.
+ */
+static void ether_init(void)
+{
+#ifdef CONFIG_DRIVER_LAN91C96
+ int cnt = 20;
+
+ writew(0x0, LAN_RESET_REGISTER);
+ do {
+ writew(0x1, LAN_RESET_REGISTER);
+ udelay(100);
+ if (cnt == 0)
+ goto reset_err_out;
+ --cnt;
+ } while (readw(LAN_RESET_REGISTER) != 0x1);
+
+ cnt = 20;
+
+ do {
+ writew(0x0, LAN_RESET_REGISTER);
+ udelay(100);
+ if (cnt == 0)
+ goto reset_err_out;
+ --cnt;
+ } while (readw(LAN_RESET_REGISTER) != 0x0000);
+ udelay(1000);
+
+ writeb(readb(ETH_CONTROL_REG) & ~0x1, ETH_CONTROL_REG);
+ udelay(1000);
+reset_err_out:
+ return;
+
+#endif
+}
+
+/**
+ * @brief misc_init_r - Configure SDP board specific configurations
+ * such as power configurations, ethernet initialization as phase2 of
+ * boot sequence
+ *
+ * @return 0
+ */
+int misc_init_r(void)
+{
+ /* Partial setup:
+ * VAUX3 - 2.8V for DVI
+ * VPLL1 - 1.8V
+ * VDAC - 1.8V
+ * and turns on LEDA/LEDB (not needed ... NOP?)
+ */
+ twl4030_power_init();
+
+ /* FIXME finish setup:
+ * VAUX1 - 2.8V for mainboard I/O
+ * VAUX2 - 2.8V for camera
+ * VAUX4 - 1.8V for OMAP3 CSI
+ * VMMC1 - 3.15V (init, variable) for MMC1
+ * VMMC2 - 1.85V for MMC2
+ * VSIM - off (init, variable) for MMC1.DAT[3..7], SIM
+ * VPLL2 - 1.8V
+ */
+ ether_init();
+
+ return 0;
+}
+
+/**
+ * @brief set_muxconf_regs Setting up the configuration Mux registers
+ * specific to the hardware. Many pins need to be moved from protect
+ * to primary mode.
+ */
+void set_muxconf_regs(void)
+{
+ /* platform specific muxes */
+ MUX_SDP3430();
+}