summaryrefslogtreecommitdiff
path: root/board/ti/omap1510inn/omap1510innovator.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/ti/omap1510inn/omap1510innovator.c')
-rw-r--r--board/ti/omap1510inn/omap1510innovator.c125
1 files changed, 0 insertions, 125 deletions
diff --git a/board/ti/omap1510inn/omap1510innovator.c b/board/ti/omap1510inn/omap1510innovator.c
deleted file mode 100644
index a2a33a0..0000000
--- a/board/ti/omap1510inn/omap1510innovator.c
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <netdev.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void flash__init (void);
-static void ether__init (void);
-
-static inline void delay (unsigned long loops)
-{
- __asm__ volatile ("1:\n"
- "subs %0, %1, #1\n"
- "bne 1b":"=r" (loops):"0" (loops));
-}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
- /* arch number of OMAP 1510-Board */
- gd->bd->bi_arch_number = MACH_TYPE_OMAP_INNOVATOR;
-
- /* adress of boot parameters */
- gd->bd->bi_boot_params = 0x10000100;
-
-/* kk - this speeds up your boot a quite a bit. However to make it
- * work, you need make sure your kernel startup flush bug is fixed.
- * ... rkw ...
- */
- icache_enable ();
-
- flash__init ();
- ether__init ();
- return 0;
-}
-
-
-int misc_init_r (void)
-{
- /* volatile ushort *gdir = (ushort *) (GPIO_DIR_CONTROL_REG); */
- /* volatile ushort *mdir = (ushort *) (MPUIO_DIR_CONTROL_REG); */
-
- /* setup gpio direction to match board (no floats!) */
- /**gdir = 0xCFF9; */
- /**mdir = 0x103F; */
-
- return (0);
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-static void flash__init (void)
-{
-#define CS0_CHIP_SELECT_REG 0xfffecc10
-#define CS3_CHIP_SELECT_REG 0xfffecc1c
-#define EMIFS_GlB_Config_REG 0xfffecc0c
-
- {
- unsigned int regval;
-
- regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG);
- regval = regval | 0x0001; /* Turn off write protection for flash devices. */
- if (regval & 0x0002) {
- regval = regval & 0xfffd; /* Swap CS0 and CS3 so that flash is visible at 0x0 and eeprom at 0x0c000000. */
- /* If, instead, you want to reference flash at 0x0c000000, then it seemed the following were necessary. */
- /* *((volatile unsigned int *)CS0_CHIP_SELECT_REG) = 0x202090; / * Overrides head.S setting of 0x212090 */
- /* *((volatile unsigned int *)CS3_CHIP_SELECT_REG) = 0x202090; / * Let's flash chips be fully functional. */
- }
- *((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval;
- }
-}
-
-
-/******************************
- Routine:
- Description:
-******************************/
-static void ether__init (void)
-{
-#define ETH_CONTROL_REG 0x0800000b
- /* take the Ethernet controller out of reset and wait
- * for the EEPROM load to complete.
- */
- *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
- udelay (3);
-}
-
-
-int dram_init (void)
-{
- gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
- return 0;
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_LAN91C96
- rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE);
-#endif
- return rc;
-}
-#endif