diff options
Diffstat (limited to 'board/ti/ks2_evm')
| -rw-r--r-- | board/ti/ks2_evm/README | 20 | ||||
| -rw-r--r-- | board/ti/ks2_evm/board.c | 7 | ||||
| -rw-r--r-- | board/ti/ks2_evm/board_k2l.c | 40 |
3 files changed, 56 insertions, 11 deletions
diff --git a/board/ti/ks2_evm/README b/board/ti/ks2_evm/README index a551e28..9ee90a4 100644 --- a/board/ti/ks2_evm/README +++ b/board/ti/ks2_evm/README @@ -3,10 +3,11 @@ U-Boot port for Texas Instruments Keystone II EVM boards Author: Murali Karicheri <m-karicheri2@ti.com> -This README has information on the u-boot port for K2HK, K2E boards. +This README has information on the u-boot port for K2HK, K2E, and K2L EVM boards. Documentation for this board can be found at http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html +https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html The K2HK board is based on Texas Instruments Keystone2 family of SoCs: K2H, K2K. More details on these SoCs are available at company websites @@ -14,7 +15,10 @@ More details on these SoCs are available at company websites K2H: http://www.ti.com/product/tci6638k2h The K2E SoC details are available at - K2E http://www.ti.com/lit/ds/symlink/66ak2e05.pdf + http://www.ti.com/lit/ds/symlink/66ak2e05.pdf + +The K2L SoC details are available at + http://www.ti.com/lit/ds/symlink/tci6630k2l.pdf Board configuration: ==================== @@ -25,6 +29,7 @@ Some of the peripherals that are configured by u-boot +------+-------+-------+-----------+-----------+-------+-------+----+ |K2HK |2 |512MB |6MB |4(2) |2 |3 |3 | |K2E |4 |512MB |2MB |8(2) |2 |3 |3 | +|K2L |2 |512MB |2MB |4(2) |4 |3 |3 | +------+-------+-------+-----------+-----------+-------+-------+----+ There are only 2 eth port installed on the boards. @@ -41,10 +46,13 @@ The port related files can be found at following folders Board configuration files: include/configs/k2hk_evm.h include/configs/k2e_evm.h +include/configs/k2l_evm.h +include/configs/k2l_evm.h As u-boot is migrating to Kconfig there is also board defconfig files configs/k2e_evm_defconfig configs/k2hk_evm_defconfig +configs/k2l_evm_defconfig Supported boot modes: - SPI NOR boot @@ -58,7 +66,7 @@ Supported image formats: Build instructions: =================== -Examples for k2hk, for k2e just replace k2hk prefix accordingly. +Examples for k2hk, for k2e and k2l just replace k2hk prefix accordingly. Don't forget to add ARCH=arm and CROSS_COMPILE. To build u-boot.bin @@ -84,6 +92,8 @@ Use u-boot.bin from the build folder for loading and running u-boot binary on EVM. Follow instructions at K2HK http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup K2E http://processors.wiki.ti.com/index.php/EVMK2E_Hardware_Setup +K2L http://processors.wiki.ti.com/index.php/TCIEVMK2L_Hardware_Setup + to configure SW1 dip switch to use "No Boot/JTAG DSP Little Endian Boot Mode" and Power ON the EVM. Follow instructions to connect serial port of EVM to PC and start TeraTerm or Hyper Terminal. @@ -128,8 +138,8 @@ instructions: 2. Suspend Target. Select Run -> Suspend from top level menu CortexA15_1 (Free Running)" 3. Load u-boot-spi.gph binary from build folder on to DDR address 0x87000000 - through CCS as described in step 2 of "Load and Run U-Boot on K2HK/K2E EVM - using CCS", but using address 0x87000000. + through CCS as described in step 2 of "Load and Run U-Boot on K2HK/K2E/K2L + EVM using CCS", but using address 0x87000000. 4. Free Run the target as described earlier (step 4) to get u-boot prompt 5. At the U-Boot console type following to setup u-boot environment variables. setenv addr_uboot 0x87000000 diff --git a/board/ti/ks2_evm/board.c b/board/ti/ks2_evm/board.c index 4029493..ff7bc4b 100644 --- a/board/ti/ks2_evm/board.c +++ b/board/ti/ks2_evm/board.c @@ -122,7 +122,6 @@ void ft_board_setup(void *blob, bd_t *bd) int nbanks; u64 size[2]; u64 start[2]; - char name[32]; int nodeoffset; u32 ddr3a_size; int unitrd_fixup = 0; @@ -158,15 +157,13 @@ void ft_board_setup(void *blob, bd_t *bd) } /* reserve memory at start of bank */ - sprintf(name, "mem_reserve_head"); - env = getenv(name); + env = getenv("mem_reserve_head"); if (env) { start[0] += ustrtoul(env, &endp, 0); size[0] -= ustrtoul(env, &endp, 0); } - sprintf(name, "mem_reserve"); - env = getenv(name); + env = getenv("mem_reserve"); if (env) size[0] -= ustrtoul(env, &endp, 0); diff --git a/board/ti/ks2_evm/board_k2l.c b/board/ti/ks2_evm/board_k2l.c index 559d20c..729a193 100644 --- a/board/ti/ks2_evm/board_k2l.c +++ b/board/ti/ks2_evm/board_k2l.c @@ -10,7 +10,7 @@ #include <common.h> #include <asm/arch/ddr3.h> #include <asm/arch/hardware.h> -#include <asm/ti-common/ti-aemif.h> +#include <asm/ti-common/keystone_net.h> DECLARE_GLOBAL_DATA_PTR; @@ -42,6 +42,44 @@ static struct pll_init_data tetris_pll_config[] = { static struct pll_init_data pa_pll_config = PASS_PLL_983; +#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET +struct eth_priv_t eth_priv_cfg[] = { + { + .int_name = "K2L_EMAC", + .rx_flow = 0, + .phy_addr = 0, + .slave_port = 1, + .sgmii_link_type = SGMII_LINK_MAC_PHY, + }, + { + .int_name = "K2L_EMAC1", + .rx_flow = 8, + .phy_addr = 1, + .slave_port = 2, + .sgmii_link_type = SGMII_LINK_MAC_PHY, + }, + { + .int_name = "K2L_EMAC2", + .rx_flow = 16, + .phy_addr = 2, + .slave_port = 3, + .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED, + }, + { + .int_name = "K2L_EMAC3", + .rx_flow = 32, + .phy_addr = 3, + .slave_port = 4, + .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED, + }, +}; + +int get_num_eth_ports(void) +{ + return sizeof(eth_priv_cfg) / sizeof(struct eth_priv_t); +} +#endif + #ifdef CONFIG_BOARD_EARLY_INIT_F int board_early_init_f(void) { |