summaryrefslogtreecommitdiff
path: root/board/ti/am335x
diff options
context:
space:
mode:
Diffstat (limited to 'board/ti/am335x')
-rw-r--r--board/ti/am335x/board.c24
1 files changed, 18 insertions, 6 deletions
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index 6135f07..c2fc5a6 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -249,14 +249,13 @@ const struct dpll_params dpll_ddr_bone_black = {
void am33xx_spl_board_init(void)
{
struct am335x_baseboard_id header;
- struct dpll_params dpll_mpu = {0, OSC-1, 1, -1, -1, -1, -1};
int mpu_vdd;
if (read_eeprom(&header) < 0)
puts("Could not get board ID.\n");
/* Get the frequency */
- dpll_mpu.m = am335x_get_efuse_mpu_max_freq(cdev);
+ dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
if (board_is_bone(&header) || board_is_bone_lt(&header)) {
/* BeagleBone PMIC Code */
@@ -293,13 +292,13 @@ void am33xx_spl_board_init(void)
* a Beaglebone Black it supports 1GHz.
*/
if (board_is_bone_lt(&header))
- dpll_mpu.m = MPUPLL_M_1000;
+ dpll_mpu_opp100.m = MPUPLL_M_1000;
/*
* Increase USB current limit to 1300mA or 1800mA and set
* the MPU voltage controller as needed.
*/
- if (dpll_mpu.m == MPUPLL_M_1000) {
+ if (dpll_mpu_opp100.m == MPUPLL_M_1000) {
usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1800MA;
mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV;
} else {
@@ -313,6 +312,15 @@ void am33xx_spl_board_init(void)
TPS65217_USB_INPUT_CUR_LIMIT_MASK))
puts("tps65217_reg_write failure\n");
+ /* Set DCDC3 (CORE) voltage to 1.125V */
+ if (tps65217_voltage_update(TPS65217_DEFDCDC3,
+ TPS65217_DCDC_VOLT_SEL_1125MV)) {
+ puts("tps65217_voltage_update failure\n");
+ return;
+ }
+
+ /* Set CORE Frequencies to OPP100 */
+ do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
/* Set DCDC2 (MPU) voltage */
if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) {
@@ -360,7 +368,8 @@ void am33xx_spl_board_init(void)
* VDD to drive at that speed.
*/
sil_rev = readl(&cdev->deviceid) >> 28;
- mpu_vdd = am335x_get_tps65910_mpu_vdd(sil_rev, dpll_mpu.m);
+ mpu_vdd = am335x_get_tps65910_mpu_vdd(sil_rev,
+ dpll_mpu_opp100.m);
/* Tell the TPS65910 to use i2c */
tps65910_set_i2c_control();
@@ -372,10 +381,13 @@ void am33xx_spl_board_init(void)
/* Second, update the CORE voltage. */
if (tps65910_voltage_update(CORE, TPS65910_OP_REG_SEL_1_1_3))
return;
+
+ /* Set CORE Frequencies to OPP100 */
+ do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
}
/* Set MPU Frequency to what we detected now that voltages are set */
- do_setup_dpll(&dpll_mpu_regs, &dpll_mpu);
+ do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
}
const struct dpll_params *get_dpll_ddr_params(void)