summaryrefslogtreecommitdiff
path: root/board/ti/am335x/board.c
diff options
context:
space:
mode:
Diffstat (limited to 'board/ti/am335x/board.c')
-rw-r--r--board/ti/am335x/board.c33
1 files changed, 29 insertions, 4 deletions
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
index b12341d..728afc2 100644
--- a/board/ti/am335x/board.c
+++ b/board/ti/am335x/board.c
@@ -83,7 +83,7 @@ static int read_eeprom(struct am335x_baseboard_id *header)
return 0;
}
-#ifdef CONFIG_SPL_BUILD
+#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
static const struct ddr_data ddr2_data = {
.datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) |
(MT47H128M16RT25E_RD_DQS<<20) |
@@ -249,10 +249,28 @@ int spl_start_uboot(void)
*/
void s_init(void)
{
-#ifdef CONFIG_SPL_BUILD
- struct am335x_baseboard_id header;
+ __maybe_unused struct am335x_baseboard_id header;
/*
+ * The ROM will only have set up sufficient pinmux to allow for the
+ * first 4KiB NOR to be read, we must finish doing what we know of
+ * the NOR mux in this space in order to continue.
+ */
+#ifdef CONFIG_NOR_BOOT
+ asm("stmfd sp!, {r2 - r4}");
+ asm("movw r4, #0x8A4");
+ asm("movw r3, #0x44E1");
+ asm("orr r4, r4, r3, lsl #16");
+ asm("mov r2, #9");
+ asm("mov r3, #8");
+ asm("gpmc_mux: str r2, [r4], #4");
+ asm("subs r3, r3, #1");
+ asm("bne gpmc_mux");
+ asm("ldmfd sp!, {r2 - r4}");
+#endif
+
+#ifdef CONFIG_SPL_BUILD
+ /*
* Save the boot parameters passed from romcode.
* We cannot delay the saving further than this,
* to prevent overwrites.
@@ -270,7 +288,7 @@ void s_init(void)
while (readl(&wdtimer->wdtwwps) != 0x0)
;
-#ifdef CONFIG_SPL_BUILD
+#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
/* Setup the PLLs and the clocks for the peripherals */
pll_init();
@@ -298,9 +316,16 @@ void s_init(void)
uart_soft_reset();
+#if defined(CONFIG_NOR_BOOT)
+ /* We want our console now. */
+ gd->baudrate = CONFIG_BAUDRATE;
+ serial_init();
+ gd->have_console = 1;
+#else
gd = &gdata;
preloader_console_init();
+#endif
/* Initalize the board header */
enable_i2c0_pin_mux();